mirror of
https://github.com/torvalds/linux.git
synced 2024-12-25 12:21:37 +00:00
0268099c89
Naming convention was changed in dts file but the clock binding documentation hasn't been updated. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
50 lines
1.3 KiB
Plaintext
50 lines
1.3 KiB
Plaintext
Binding for a ST divider and multiplexer clock driver.
|
|
|
|
This binding uses the common clock binding[1].
|
|
Base address is located to the parent node. See clock binding[2]
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
|
|
|
|
Required properties:
|
|
|
|
- compatible : shall be:
|
|
"st,clkgena-divmux-c65-hs", "st,clkgena-divmux"
|
|
"st,clkgena-divmux-c65-ls", "st,clkgena-divmux"
|
|
"st,clkgena-divmux-c32-odf0", "st,clkgena-divmux"
|
|
"st,clkgena-divmux-c32-odf1", "st,clkgena-divmux"
|
|
"st,clkgena-divmux-c32-odf2", "st,clkgena-divmux"
|
|
"st,clkgena-divmux-c32-odf3", "st,clkgena-divmux"
|
|
|
|
- #clock-cells : From common clock binding; shall be set to 1.
|
|
|
|
- clocks : From common clock binding
|
|
|
|
- clock-output-names : From common clock binding.
|
|
|
|
Example:
|
|
|
|
clockgen-a@fd345000 {
|
|
reg = <0xfd345000 0xb50>;
|
|
|
|
clk_m_a1_div1: clk-m-a1-div1 {
|
|
#clock-cells = <1>;
|
|
compatible = "st,clkgena-divmux-c32-odf1",
|
|
"st,clkgena-divmux";
|
|
|
|
clocks = <&clk_m_a1_osc_prediv>,
|
|
<&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
|
|
<&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
|
|
|
|
clock-output-names = "clk-m-rx-icn-ts",
|
|
"clk-m-rx-icn-vdp-0",
|
|
"", /* unused */
|
|
"clk-m-prv-t1-bus",
|
|
"clk-m-icn-reg-12",
|
|
"clk-m-icn-reg-10",
|
|
"", /* unused */
|
|
"clk-m-icn-st231";
|
|
};
|
|
};
|
|
|