linux/arch/arm/mach-exynos/firmware.c
Arnd Bergmann 03c1b7609f ARM: EXYNOS: Fix build with ARM_CPU_SUSPEND=n
"ARM: EXYNOS: Add support for firmware-assisted suspend/resume" patch
added to arch/arm/mach-exynos/firmware.c new references to functions
from arch/arm/mach-exynos/sleep.S causing the new CONFIG_PM_SLEEP=n
build breakages.  Then "ARM: EXYNOS: Fix build with PM_SLEEP=n and
ARM_EXYNOS_CPUIDLE=y" patch tried to fix the CONFIG_PM_SLEEP=n issues
by always building sleep.S which caused the CONFIG_ARM_CPU_SUSPEND=n
build breakage.  Fix it by building arch/arm/mach-exynos/sleep.o only
for CONFIG_EXYNOS_CPU_SUSPEND=y and adding appropriate IS_ENABLED()
checks to arch/arm/mach-exynos/firmware.c.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[b.zolnierkie: fixed ->resume check and added patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-10-28 08:10:21 +09:00

159 lines
3.7 KiB
C

/*
* Copyright (C) 2012 Samsung Electronics.
* Kyungmin Park <kyungmin.park@samsung.com>
* Tomasz Figa <t.figa@samsung.com>
*
* This program is free software,you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/firmware.h>
#include <asm/suspend.h>
#include <mach/map.h>
#include "common.h"
#include "smc.h"
#define EXYNOS_SLEEP_MAGIC 0x00000bad
#define EXYNOS_AFTR_MAGIC 0xfcba0d10
#define EXYNOS_BOOT_ADDR 0x8
#define EXYNOS_BOOT_FLAG 0xc
static void exynos_save_cp15(void)
{
/* Save Power control and Diagnostic registers */
asm ("mrc p15, 0, %0, c15, c0, 0\n"
"mrc p15, 0, %1, c15, c0, 1\n"
: "=r" (cp15_save_power), "=r" (cp15_save_diag)
: : "cc");
}
static int exynos_do_idle(unsigned long mode)
{
switch (mode) {
case FW_DO_IDLE_AFTR:
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_save_cp15();
__raw_writel(virt_to_phys(exynos_cpu_resume_ns),
sysram_ns_base_addr + 0x24);
__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0);
break;
case FW_DO_IDLE_SLEEP:
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
}
return 0;
}
static int exynos_cpu_boot(int cpu)
{
/*
* Exynos3250 doesn't need to send smc command for secondary CPU boot
* because Exynos3250 removes WFE in secure mode.
*/
if (soc_is_exynos3250())
return 0;
/*
* The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
* But, Exynos4212 has only one secondary CPU so second parameter
* isn't used for informing secure firmware about CPU id.
*/
if (soc_is_exynos4212())
cpu = 0;
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}
static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
{
void __iomem *boot_reg;
if (!sysram_ns_base_addr)
return -ENODEV;
boot_reg = sysram_ns_base_addr + 0x1c;
/*
* Almost all Exynos-series of SoCs that run in secure mode don't need
* additional offset for every CPU, with Exynos4412 being the only
* exception.
*/
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
__raw_writel(boot_addr, boot_reg);
return 0;
}
static int exynos_cpu_suspend(unsigned long arg)
{
flush_cache_all();
outer_flush_all();
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
pr_info("Failed to suspend the system\n");
writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
return 1;
}
static int exynos_suspend(void)
{
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_save_cp15();
writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
writel(virt_to_phys(exynos_cpu_resume_ns),
sysram_ns_base_addr + EXYNOS_BOOT_ADDR);
return cpu_suspend(0, exynos_cpu_suspend);
}
static int exynos_resume(void)
{
writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
return 0;
}
static const struct firmware_ops exynos_firmware_ops = {
.do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
.set_cpu_boot_addr = exynos_set_cpu_boot_addr,
.cpu_boot = exynos_cpu_boot,
.suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
.resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL,
};
void __init exynos_firmware_init(void)
{
struct device_node *nd;
const __be32 *addr;
nd = of_find_compatible_node(NULL, NULL,
"samsung,secure-firmware");
if (!nd)
return;
addr = of_get_address(nd, 0, NULL, NULL);
if (!addr) {
pr_err("%s: No address specified.\n", __func__);
return;
}
pr_info("Running under secure firmware.\n");
register_firmware_ops(&exynos_firmware_ops);
}