Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-23 11:21:33 +00:00
Code Issues Packages Projects Releases Wiki Activity
038b0a6d8d
linux/arch/ppc/platforms/mpc8272ads_setup.c
Uwe Zeisberger f30c226954 fix file specification in comments 
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00

367 lines
8.6 KiB
C
Raw Blame History

/*
* arch/ppc/platforms/mpc8272ads_setup.c
*
* MPC82xx Board-specific PlatformDevice descriptions
*
* 2005 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/ioport.h>
#include <linux/fs_enet_pd.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/mpc8260.h>
#include <asm/cpm2.h>
#include <asm/immap_cpm2.h>
#include <asm/irq.h>
#include <asm/ppc_sys.h>
#include <asm/ppcboot.h>
#include <linux/fs_uart_pd.h>
#include "pq2ads_pd.h"
static void init_fcc1_ioports(void);
static void init_fcc2_ioports(void);
static void init_scc1_uart_ioports(void);
static void init_scc4_uart_ioports(void);
static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
[fsid_scc1_uart] = {
.init_ioports = init_scc1_uart_ioports,
.fs_no = fsid_scc1_uart,
.brg = 1,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_scc4_uart] = {
.init_ioports = init_scc4_uart_ioports,
.fs_no = fsid_scc4_uart,
.brg = 4,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = {
.mdio_dat.bit = 18,
.mdio_dir.bit = 18,
.mdc_dat.bit = 19,
.delay = 1,
};
static struct fs_platform_info mpc82xx_enet_pdata[] = {
[fsid_fcc1] = {
.fs_no = fsid_fcc1,
.cp_page = CPM_CR_FCC1_PAGE,
.cp_block = CPM_CR_FCC1_SBLOCK,
.clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
.clk_route = CMX1_CLK_ROUTE,
.clk_mask = CMX1_CLK_MASK,
.init_ioports = init_fcc1_ioports,
.mem_offset = FCC1_MEM_OFFSET,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.bus_id = "0:00",
},
[fsid_fcc2] = {
.fs_no = fsid_fcc2,
.cp_page = CPM_CR_FCC2_PAGE,
.cp_block = CPM_CR_FCC2_SBLOCK,
.clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
.clk_route = CMX2_CLK_ROUTE,
.clk_mask = CMX2_CLK_MASK,
.init_ioports = init_fcc2_ioports,
.mem_offset = FCC2_MEM_OFFSET,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.bus_id = "0:03",
},
};
static void init_fcc1_ioports(struct fs_platform_info*)
{
struct io_port *io;
u32 tempval;
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
io = &immap->im_ioport;
/* Enable the PHY */
clrbits32(bcsr, BCSR1_FETHIEN);
setbits32(bcsr, BCSR1_FETH_RST);
/* FCC1 pins are on port A/C. */
/* Configure port A and C pins for FCC1 Ethernet. */
tempval = in_be32(&io->iop_pdira);
tempval &= ~PA1_DIRA0;
tempval |= PA1_DIRA1;
out_be32(&io->iop_pdira, tempval);
tempval = in_be32(&io->iop_psora);
tempval &= ~PA1_PSORA0;
tempval |= PA1_PSORA1;
out_be32(&io->iop_psora, tempval);
setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1);
/* Alter clocks */
tempval = PC_F1TXCLK|PC_F1RXCLK;
clrbits32(&io->iop_psorc, tempval);
clrbits32(&io->iop_pdirc, tempval);
setbits32(&io->iop_pparc, tempval);
clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK);
setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE);
iounmap(bcsr);
iounmap(immap);
}
static void init_fcc2_ioports(struct fs_platform_info*)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
struct io_port *io;
u32 tempval;
immap = cpm2_immr;
io = &immap->im_ioport;
/* Enable the PHY */
clrbits32(bcsr, BCSR3_FETHIEN2);
setbits32(bcsr, BCSR3_FETH2_RST);
/* FCC2 are port B/C. */
/* Configure port A and C pins for FCC2 Ethernet. */
tempval = in_be32(&io->iop_pdirb);
tempval &= ~PB2_DIRB0;
tempval |= PB2_DIRB1;
out_be32(&io->iop_pdirb, tempval);
tempval = in_be32(&io->iop_psorb);
tempval &= ~PB2_PSORB0;
tempval |= PB2_PSORB1;
out_be32(&io->iop_psorb, tempval);
setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1);
tempval = PC_F2RXCLK|PC_F2TXCLK;
/* Alter clocks */
clrbits32(&io->iop_psorc,tempval);
clrbits32(&io->iop_pdirc,tempval);
setbits32(&io->iop_pparc,tempval);
clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK);
setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE);
iounmap(bcsr);
iounmap(immap);
}
static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
int idx)
{
bd_t* bi = (void*)__res;
int fs_no = fsid_fcc1+pdev->id-1;
if(fs_no > ARRAY_SIZE(mpc82xx_enet_pdata)) {
return;
}
mpc82xx_enet_pdata[fs_no].dpram_offset=
(u32)cpm2_immr->im_dprambase;
mpc82xx_enet_pdata[fs_no].fcc_regs_c =
(u32)cpm2_immr->im_fcc_c;
memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6);
/* prevent dup mac */
if(fs_no == fsid_fcc2)
mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1;
pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no];
}
static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc8272_uart_pdata);
int id = fs_uart_id_scc2fsid(idx);
/* no need to alter anything if console */
if ((id <= num) && (!pdev->dev.platform_data)) {
pinfo = &mpc8272_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static void init_scc1_uart_ioports(struct fs_uart_platform_info*)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
/* SCC1 is only on port D */
setbits32(&immap->im_ioport.iop_ppard,0x00000003);
clrbits32(&immap->im_ioport.iop_psord,0x00000001);
setbits32(&immap->im_ioport.iop_psord,0x00000002);
clrbits32(&immap->im_ioport.iop_pdird,0x00000001);
setbits32(&immap->im_ioport.iop_pdird,0x00000002);
/* Wire BRG1 to SCC1 */
clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff);
iounmap(immap);
}
static void init_scc4_uart_ioports(struct fs_uart_platform_info*)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
setbits32(&immap->im_ioport.iop_ppard,0x00000600);
clrbits32(&immap->im_ioport.iop_psord,0x00000600);
clrbits32(&immap->im_ioport.iop_pdird,0x00000200);
setbits32(&immap->im_ioport.iop_pdird,0x00000400);
/* Wire BRG4 to SCC4 */
clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff);
setbits32(&immap->im_cpmux.cmx_scr,0x0000001b);
iounmap(immap);
}
static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev,
int idx)
{
m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT;
m82xx_mii_bb_pdata.irq[1] = -1;
m82xx_mii_bb_pdata.irq[2] = -1;
m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT;
m82xx_mii_bb_pdata.irq[31] = -1;
m82xx_mii_bb_pdata.mdio_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
m82xx_mii_bb_pdata.mdio_dir.offset =
(u32)&cpm2_immr->im_ioport.iop_pdirc;
m82xx_mii_bb_pdata.mdc_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
pdev->dev.platform_data = &m82xx_mii_bb_pdata;
}
static int mpc8272ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
{
.bus_id = "fsl-cpm-fcc",
.rtn = mpc8272ads_fixup_enet_pdata,
},
{
.bus_id = "fsl-cpm-scc:uart",
.rtn = mpc8272ads_fixup_uart_pdata,
},
{
.bus_id = "fsl-bb-mdio",
.rtn = mpc8272ads_fixup_mdio_pdata,
},
{
.bus_id = NULL
}
};
platform_notify_map(dev_map,dev);
return 0;
}
int __init mpc8272ads_init(void)
{
printk(KERN_NOTICE "mpc8272ads: Init\n");
platform_notify = mpc8272ads_platform_notify;
ppc_sys_device_initfunc();
ppc_sys_device_disable_all();
ppc_sys_device_enable(MPC82xx_CPM_FCC1);
ppc_sys_device_enable(MPC82xx_CPM_FCC2);
/* to be ready for console, let's attach pdata here */
#ifdef CONFIG_SERIAL_CPM_SCC1
ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC1);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC4);
#endif
ppc_sys_device_enable(MPC82xx_MDIO_BB);
return 0;
}
/*
To prevent confusion, console selection is gross:
by 0 assumed SCC1 and by 1 assumed SCC4
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SCC4 here*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
} else { /*over SCC1*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
return NULL;
}
arch_initcall(mpc8272ads_init);
Reference in New Issue View Git Blame Copy Permalink