linux/drivers/usb/dwc3
Jack Pham 03715ea2e3 usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL
There exists a possible scenario in which dwc3_gadget_init() can fail:
during during host -> peripheral mode switch in dwc3_set_mode(), and
a pending gadget driver fails to bind.  Then, if the DRD undergoes
another mode switch from peripheral->host the resulting
dwc3_gadget_exit() will attempt to reference an invalid and dangling
dwc->gadget pointer as well as call dma_free_coherent() on unmapped
DMA pointers.

The exact scenario can be reproduced as follows:
 - Start DWC3 in peripheral mode
 - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs)
 - Run FunctionFS userspace application (open EPs, write descriptors, etc)
 - Bind gadget driver to DWC3's UDC
 - Switch DWC3 to host mode
   => dwc3_gadget_exit() is called. usb_del_gadget() will put the
	ConfigFS driver instance on the gadget_driver_pending_list
 - Stop FunctionFS application (closes the ep files)
 - Switch DWC3 to peripheral mode
   => dwc3_gadget_init() fails as usb_add_gadget() calls
	check_pending_gadget_drivers() and attempts to rebind the UDC
	to the ConfigFS gadget but fails with -19 (-ENODEV) because the
	FFS instance is not in FFS_ACTIVE state (userspace has not
	re-opened and written the descriptors yet, i.e. desc_ready!=0).
 - Switch DWC3 back to host mode
   => dwc3_gadget_exit() is called again, but this time dwc->gadget
	is invalid.

Although it can be argued that userspace should take responsibility
for ensuring that the FunctionFS application be ready prior to
allowing the composite driver bind to the UDC, failure to do so
should not result in a panic from the kernel driver.

Fix this by setting dwc->gadget to NULL in the failure path of
dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out
unless the gadget pointer is valid.

Fixes: e81a7018d9 ("usb: dwc3: allocate gadget structure dynamically")
Cc: <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210528160405.17550-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02 16:50:54 +02:00
..
core.c usb: dwc3: Capture new capability register GHWPARAMS9 2021-04-23 13:05:15 +02:00
core.h usb: dwc3: gadget: Rename EOPF event macros to Suspend 2021-05-10 14:45:49 +02:00
debug.h usb: dwc3: gadget: Rename EOPF event macros to Suspend 2021-05-10 14:45:49 +02:00
debugfs.c usb: dwc3: fix incorrect kernel-doc comment syntax in files 2021-04-02 15:20:51 +02:00
drd.c usb: dwc3: drd: Improve dwc3_get_extcon() style 2020-12-28 15:51:40 +01:00
dwc3-exynos.c usb: dwc3: exynos: fix incorrect kernel-doc comment syntax 2021-04-02 15:20:54 +02:00
dwc3-haps.c usb: dwc3: haps: Constify the software node 2021-02-04 15:42:06 +01:00
dwc3-imx8mp.c usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe() 2021-05-10 14:58:41 +02:00
dwc3-keystone.c usb: dwc3: fix incorrect kernel-doc comment syntax in files 2021-04-02 15:20:51 +02:00
dwc3-meson-g12a.c usb: dwc3: meson-g12a: disable clk on error handling path in probe 2020-12-28 15:45:14 +01:00
dwc3-of-simple.c usb: dwc3: Add driver for Xilinx platforms 2021-03-23 12:48:14 +01:00
dwc3-omap.c usb: dwc3: omap: improve extcon initialization 2021-05-10 15:04:37 +02:00
dwc3-pci.c usb: dwc3: pci: Enable usb2-gadget-lpm-disable for Intel Merrifield 2021-05-10 14:40:21 +02:00
dwc3-qcom.c usb: dwc3: qcom: Detect DWC3 DT-nodes using compatible string 2021-04-10 10:46:09 +02:00
dwc3-st.c usb: dwc3: st: fix incorrect kernel-doc comment syntax in file 2021-04-02 15:20:46 +02:00
dwc3-xilinx.c usb: dwc3: xilinx: Remove the extra freeing of clocks 2021-04-09 16:05:32 +02:00
ep0.c usb: dwc3: ep0: Fix delay status handling 2020-10-27 11:33:53 +02:00
gadget.c usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL 2021-06-02 16:50:54 +02:00
gadget.h usb: dwc3: add cancelled reasons for dwc3 requests 2021-04-02 15:27:36 +02:00
host.c usb: dwc3: host: Use software node API with the properties 2021-02-05 10:08:19 +01:00
io.h usb: dwc3: fix incorrect kernel-doc comment syntax in files 2021-04-02 15:20:51 +02:00
Kconfig usb: dwc3: Add driver for Xilinx platforms 2021-03-23 12:48:14 +01:00
Makefile usb: dwc3: Add driver for Xilinx platforms 2021-03-23 12:48:14 +01:00
trace.c usb: dwc3: fix incorrect kernel-doc comment syntax in files 2021-04-02 15:20:51 +02:00
trace.h usb: dwc3: fix incorrect kernel-doc comment syntax in files 2021-04-02 15:20:51 +02:00
ulpi.c usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression 2020-12-28 15:55:44 +01:00