mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 10:32:35 +00:00
df561f6688
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
597 lines
13 KiB
C
597 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for Zarlink DVB-T MT352 demodulator
|
|
*
|
|
* Written by Holger Waechtler <holger@qanu.de>
|
|
* and Daniel Mack <daniel@qanu.de>
|
|
*
|
|
* AVerMedia AVerTV DVB-T 771 support by
|
|
* Wolfram Joost <dbox2@frokaschwei.de>
|
|
*
|
|
* Support for Samsung TDTC9251DH01C(M) tuner
|
|
* Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it>
|
|
* Amauri Celani <acelani@essegi.net>
|
|
*
|
|
* DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
|
|
* Christopher Pascoe <c.pascoe@itee.uq.edu.au>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <media/dvb_frontend.h>
|
|
#include "mt352_priv.h"
|
|
#include "mt352.h"
|
|
|
|
struct mt352_state {
|
|
struct i2c_adapter* i2c;
|
|
struct dvb_frontend frontend;
|
|
|
|
/* configuration settings */
|
|
struct mt352_config config;
|
|
};
|
|
|
|
static int debug;
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug) printk(KERN_DEBUG "mt352: " args); \
|
|
} while (0)
|
|
|
|
static int mt352_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
|
|
{
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
u8 buf[2] = { reg, val };
|
|
struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0,
|
|
.buf = buf, .len = 2 };
|
|
int err = i2c_transfer(state->i2c, &msg, 1);
|
|
if (err != 1) {
|
|
printk("mt352_write() to reg %x failed (err = %d)!\n", reg, err);
|
|
return err;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int _mt352_write(struct dvb_frontend* fe, const u8 ibuf[], int ilen)
|
|
{
|
|
int err,i;
|
|
for (i=0; i < ilen-1; i++)
|
|
if ((err = mt352_single_write(fe,ibuf[0]+i,ibuf[i+1])))
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_read_register(struct mt352_state* state, u8 reg)
|
|
{
|
|
int ret;
|
|
u8 b0 [] = { reg };
|
|
u8 b1 [] = { 0 };
|
|
struct i2c_msg msg [] = { { .addr = state->config.demod_address,
|
|
.flags = 0,
|
|
.buf = b0, .len = 1 },
|
|
{ .addr = state->config.demod_address,
|
|
.flags = I2C_M_RD,
|
|
.buf = b1, .len = 1 } };
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
|
|
if (ret != 2) {
|
|
printk("%s: readreg error (reg=%d, ret==%i)\n",
|
|
__func__, reg, ret);
|
|
return ret;
|
|
}
|
|
|
|
return b1[0];
|
|
}
|
|
|
|
static int mt352_sleep(struct dvb_frontend* fe)
|
|
{
|
|
static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 };
|
|
|
|
_mt352_write(fe, mt352_softdown, sizeof(mt352_softdown));
|
|
return 0;
|
|
}
|
|
|
|
static void mt352_calc_nominal_rate(struct mt352_state* state,
|
|
u32 bandwidth,
|
|
unsigned char *buf)
|
|
{
|
|
u32 adc_clock = 20480; /* 20.340 MHz */
|
|
u32 bw,value;
|
|
|
|
switch (bandwidth) {
|
|
case 6000000:
|
|
bw = 6;
|
|
break;
|
|
case 7000000:
|
|
bw = 7;
|
|
break;
|
|
case 8000000:
|
|
default:
|
|
bw = 8;
|
|
break;
|
|
}
|
|
if (state->config.adc_clock)
|
|
adc_clock = state->config.adc_clock;
|
|
|
|
value = 64 * bw * (1<<16) / (7 * 8);
|
|
value = value * 1000 / adc_clock;
|
|
dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
|
|
__func__, bw, adc_clock, value);
|
|
buf[0] = msb(value);
|
|
buf[1] = lsb(value);
|
|
}
|
|
|
|
static void mt352_calc_input_freq(struct mt352_state* state,
|
|
unsigned char *buf)
|
|
{
|
|
int adc_clock = 20480; /* 20.480000 MHz */
|
|
int if2 = 36167; /* 36.166667 MHz */
|
|
int ife,value;
|
|
|
|
if (state->config.adc_clock)
|
|
adc_clock = state->config.adc_clock;
|
|
if (state->config.if2)
|
|
if2 = state->config.if2;
|
|
|
|
if (adc_clock >= if2 * 2)
|
|
ife = if2;
|
|
else {
|
|
ife = adc_clock - (if2 % adc_clock);
|
|
if (ife > adc_clock / 2)
|
|
ife = adc_clock - ife;
|
|
}
|
|
value = -16374 * ife / adc_clock;
|
|
dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n",
|
|
__func__, if2, ife, adc_clock, value, value & 0x3fff);
|
|
buf[0] = msb(value);
|
|
buf[1] = lsb(value);
|
|
}
|
|
|
|
static int mt352_set_parameters(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *op = &fe->dtv_property_cache;
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
unsigned char buf[13];
|
|
static unsigned char tuner_go[] = { 0x5d, 0x01 };
|
|
static unsigned char fsm_go[] = { 0x5e, 0x01 };
|
|
unsigned int tps = 0;
|
|
|
|
switch (op->code_rate_HP) {
|
|
case FEC_2_3:
|
|
tps |= (1 << 7);
|
|
break;
|
|
case FEC_3_4:
|
|
tps |= (2 << 7);
|
|
break;
|
|
case FEC_5_6:
|
|
tps |= (3 << 7);
|
|
break;
|
|
case FEC_7_8:
|
|
tps |= (4 << 7);
|
|
break;
|
|
case FEC_1_2:
|
|
case FEC_AUTO:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (op->code_rate_LP) {
|
|
case FEC_2_3:
|
|
tps |= (1 << 4);
|
|
break;
|
|
case FEC_3_4:
|
|
tps |= (2 << 4);
|
|
break;
|
|
case FEC_5_6:
|
|
tps |= (3 << 4);
|
|
break;
|
|
case FEC_7_8:
|
|
tps |= (4 << 4);
|
|
break;
|
|
case FEC_1_2:
|
|
case FEC_AUTO:
|
|
break;
|
|
case FEC_NONE:
|
|
if (op->hierarchy == HIERARCHY_AUTO ||
|
|
op->hierarchy == HIERARCHY_NONE)
|
|
break;
|
|
fallthrough;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (op->modulation) {
|
|
case QPSK:
|
|
break;
|
|
case QAM_AUTO:
|
|
case QAM_16:
|
|
tps |= (1 << 13);
|
|
break;
|
|
case QAM_64:
|
|
tps |= (2 << 13);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (op->transmission_mode) {
|
|
case TRANSMISSION_MODE_2K:
|
|
case TRANSMISSION_MODE_AUTO:
|
|
break;
|
|
case TRANSMISSION_MODE_8K:
|
|
tps |= (1 << 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (op->guard_interval) {
|
|
case GUARD_INTERVAL_1_32:
|
|
case GUARD_INTERVAL_AUTO:
|
|
break;
|
|
case GUARD_INTERVAL_1_16:
|
|
tps |= (1 << 2);
|
|
break;
|
|
case GUARD_INTERVAL_1_8:
|
|
tps |= (2 << 2);
|
|
break;
|
|
case GUARD_INTERVAL_1_4:
|
|
tps |= (3 << 2);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (op->hierarchy) {
|
|
case HIERARCHY_AUTO:
|
|
case HIERARCHY_NONE:
|
|
break;
|
|
case HIERARCHY_1:
|
|
tps |= (1 << 10);
|
|
break;
|
|
case HIERARCHY_2:
|
|
tps |= (2 << 10);
|
|
break;
|
|
case HIERARCHY_4:
|
|
tps |= (3 << 10);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
buf[0] = TPS_GIVEN_1; /* TPS_GIVEN_1 and following registers */
|
|
|
|
buf[1] = msb(tps); /* TPS_GIVEN_(1|0) */
|
|
buf[2] = lsb(tps);
|
|
|
|
buf[3] = 0x50; // old
|
|
// buf[3] = 0xf4; // pinnacle
|
|
|
|
mt352_calc_nominal_rate(state, op->bandwidth_hz, buf+4);
|
|
mt352_calc_input_freq(state, buf+6);
|
|
|
|
if (state->config.no_tuner) {
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
|
|
_mt352_write(fe, buf, 8);
|
|
_mt352_write(fe, fsm_go, 2);
|
|
} else {
|
|
if (fe->ops.tuner_ops.calc_regs) {
|
|
fe->ops.tuner_ops.calc_regs(fe, buf+8, 5);
|
|
buf[8] <<= 1;
|
|
_mt352_write(fe, buf, sizeof(buf));
|
|
_mt352_write(fe, tuner_go, 2);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_get_parameters(struct dvb_frontend* fe,
|
|
struct dtv_frontend_properties *op)
|
|
{
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
u16 tps;
|
|
u16 div;
|
|
u8 trl;
|
|
static const u8 tps_fec_to_api[8] =
|
|
{
|
|
FEC_1_2,
|
|
FEC_2_3,
|
|
FEC_3_4,
|
|
FEC_5_6,
|
|
FEC_7_8,
|
|
FEC_AUTO,
|
|
FEC_AUTO,
|
|
FEC_AUTO
|
|
};
|
|
|
|
if ( (mt352_read_register(state,0x00) & 0xC0) != 0xC0 )
|
|
return -EINVAL;
|
|
|
|
/* Use TPS_RECEIVED-registers, not the TPS_CURRENT-registers because
|
|
* the mt352 sometimes works with the wrong parameters
|
|
*/
|
|
tps = (mt352_read_register(state, TPS_RECEIVED_1) << 8) | mt352_read_register(state, TPS_RECEIVED_0);
|
|
div = (mt352_read_register(state, CHAN_START_1) << 8) | mt352_read_register(state, CHAN_START_0);
|
|
trl = mt352_read_register(state, TRL_NOMINAL_RATE_1);
|
|
|
|
op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7];
|
|
op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7];
|
|
|
|
switch ( (tps >> 13) & 3)
|
|
{
|
|
case 0:
|
|
op->modulation = QPSK;
|
|
break;
|
|
case 1:
|
|
op->modulation = QAM_16;
|
|
break;
|
|
case 2:
|
|
op->modulation = QAM_64;
|
|
break;
|
|
default:
|
|
op->modulation = QAM_AUTO;
|
|
break;
|
|
}
|
|
|
|
op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : TRANSMISSION_MODE_2K;
|
|
|
|
switch ( (tps >> 2) & 3)
|
|
{
|
|
case 0:
|
|
op->guard_interval = GUARD_INTERVAL_1_32;
|
|
break;
|
|
case 1:
|
|
op->guard_interval = GUARD_INTERVAL_1_16;
|
|
break;
|
|
case 2:
|
|
op->guard_interval = GUARD_INTERVAL_1_8;
|
|
break;
|
|
case 3:
|
|
op->guard_interval = GUARD_INTERVAL_1_4;
|
|
break;
|
|
default:
|
|
op->guard_interval = GUARD_INTERVAL_AUTO;
|
|
break;
|
|
}
|
|
|
|
switch ( (tps >> 10) & 7)
|
|
{
|
|
case 0:
|
|
op->hierarchy = HIERARCHY_NONE;
|
|
break;
|
|
case 1:
|
|
op->hierarchy = HIERARCHY_1;
|
|
break;
|
|
case 2:
|
|
op->hierarchy = HIERARCHY_2;
|
|
break;
|
|
case 3:
|
|
op->hierarchy = HIERARCHY_4;
|
|
break;
|
|
default:
|
|
op->hierarchy = HIERARCHY_AUTO;
|
|
break;
|
|
}
|
|
|
|
op->frequency = (500 * (div - IF_FREQUENCYx6)) / 3 * 1000;
|
|
|
|
if (trl == 0x72)
|
|
op->bandwidth_hz = 8000000;
|
|
else if (trl == 0x64)
|
|
op->bandwidth_hz = 7000000;
|
|
else
|
|
op->bandwidth_hz = 6000000;
|
|
|
|
|
|
if (mt352_read_register(state, STATUS_2) & 0x02)
|
|
op->inversion = INVERSION_OFF;
|
|
else
|
|
op->inversion = INVERSION_ON;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
|
{
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
int s0, s1, s3;
|
|
|
|
/* FIXME:
|
|
*
|
|
* The MT352 design manual from Zarlink states (page 46-47):
|
|
*
|
|
* Notes about the TUNER_GO register:
|
|
*
|
|
* If the Read_Tuner_Byte (bit-1) is activated, then the tuner status
|
|
* byte is copied from the tuner to the STATUS_3 register and
|
|
* completion of the read operation is indicated by bit-5 of the
|
|
* INTERRUPT_3 register.
|
|
*/
|
|
|
|
if ((s0 = mt352_read_register(state, STATUS_0)) < 0)
|
|
return -EREMOTEIO;
|
|
if ((s1 = mt352_read_register(state, STATUS_1)) < 0)
|
|
return -EREMOTEIO;
|
|
if ((s3 = mt352_read_register(state, STATUS_3)) < 0)
|
|
return -EREMOTEIO;
|
|
|
|
*status = 0;
|
|
if (s0 & (1 << 4))
|
|
*status |= FE_HAS_CARRIER;
|
|
if (s0 & (1 << 1))
|
|
*status |= FE_HAS_VITERBI;
|
|
if (s0 & (1 << 5))
|
|
*status |= FE_HAS_LOCK;
|
|
if (s1 & (1 << 1))
|
|
*status |= FE_HAS_SYNC;
|
|
if (s3 & (1 << 6))
|
|
*status |= FE_HAS_SIGNAL;
|
|
|
|
if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
|
|
(FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
|
|
*status &= ~FE_HAS_LOCK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
|
|
*ber = (mt352_read_register (state, RS_ERR_CNT_2) << 16) |
|
|
(mt352_read_register (state, RS_ERR_CNT_1) << 8) |
|
|
(mt352_read_register (state, RS_ERR_CNT_0));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
|
|
/* align the 12 bit AGC gain with the most significant bits */
|
|
u16 signal = ((mt352_read_register(state, AGC_GAIN_1) & 0x0f) << 12) |
|
|
(mt352_read_register(state, AGC_GAIN_0) << 4);
|
|
|
|
/* inverse of gain is signal strength */
|
|
*strength = ~signal;
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
|
|
u8 _snr = mt352_read_register (state, SNR);
|
|
*snr = (_snr << 8) | _snr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
|
|
*ucblocks = (mt352_read_register (state, RS_UBC_1) << 8) |
|
|
(mt352_read_register (state, RS_UBC_0));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
|
|
{
|
|
fe_tune_settings->min_delay_ms = 800;
|
|
fe_tune_settings->step_size = 0;
|
|
fe_tune_settings->max_drift = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_init(struct dvb_frontend* fe)
|
|
{
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
|
|
static u8 mt352_reset_attach [] = { RESET, 0xC0 };
|
|
|
|
dprintk("%s: hello\n",__func__);
|
|
|
|
if ((mt352_read_register(state, CLOCK_CTL) & 0x10) == 0 ||
|
|
(mt352_read_register(state, CONFIG) & 0x20) == 0) {
|
|
|
|
/* Do a "hard" reset */
|
|
_mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach));
|
|
return state->config.demod_init(fe);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mt352_release(struct dvb_frontend* fe)
|
|
{
|
|
struct mt352_state* state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static const struct dvb_frontend_ops mt352_ops;
|
|
|
|
struct dvb_frontend* mt352_attach(const struct mt352_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct mt352_state* state = NULL;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct mt352_state), GFP_KERNEL);
|
|
if (state == NULL) goto error;
|
|
|
|
/* setup the state */
|
|
state->i2c = i2c;
|
|
memcpy(&state->config,config,sizeof(struct mt352_config));
|
|
|
|
/* check if the demod is there */
|
|
if (mt352_read_register(state, CHIP_ID) != ID_MT352) goto error;
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &mt352_ops, sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
static const struct dvb_frontend_ops mt352_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "Zarlink MT352 DVB-T",
|
|
.frequency_min_hz = 174 * MHz,
|
|
.frequency_max_hz = 862 * MHz,
|
|
.frequency_stepsize_hz = 166667,
|
|
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER |
|
|
FE_CAN_MUTE_TS
|
|
},
|
|
|
|
.release = mt352_release,
|
|
|
|
.init = mt352_init,
|
|
.sleep = mt352_sleep,
|
|
.write = _mt352_write,
|
|
|
|
.set_frontend = mt352_set_parameters,
|
|
.get_frontend = mt352_get_parameters,
|
|
.get_tune_settings = mt352_get_tune_settings,
|
|
|
|
.read_status = mt352_read_status,
|
|
.read_ber = mt352_read_ber,
|
|
.read_signal_strength = mt352_read_signal_strength,
|
|
.read_snr = mt352_read_snr,
|
|
.read_ucblocks = mt352_read_ucblocks,
|
|
};
|
|
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
|
|
MODULE_DESCRIPTION("Zarlink MT352 DVB-T Demodulator driver");
|
|
MODULE_AUTHOR("Holger Waechtler, Daniel Mack, Antonio Mancuso");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(mt352_attach);
|