linux/drivers/video/backlight/vgg2432a4.c
Denis V. Lunev 866bbdba77 backlight: Value of ILI9320_RGB_IF2 register should not be hardcoded
It is stored in the board specific file
  ./arch/arm/mach-s3c2412/mach-jive.c
as .rgb_if2.

Actually, the value is correct, only semantic is wrong.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:37:28 +00:00

285 lines
6.4 KiB
C

/* drivers/video/backlight/vgg2432a4.c
*
* VGG2432A4 (ILI9320) LCD controller driver.
*
* Copyright 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/lcd.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <video/ili9320.h>
#include "ili9320.h"
/* Device initialisation sequences */
static struct ili9320_reg vgg_init1[] = {
{
.address = ILI9320_POWER1,
.value = ILI9320_POWER1_AP(0) | ILI9320_POWER1_BT(0),
}, {
.address = ILI9320_POWER2,
.value = (ILI9320_POWER2_VC(7) |
ILI9320_POWER2_DC0(0) | ILI9320_POWER2_DC1(0)),
}, {
.address = ILI9320_POWER3,
.value = ILI9320_POWER3_VRH(0),
}, {
.address = ILI9320_POWER4,
.value = ILI9320_POWER4_VREOUT(0),
},
};
static struct ili9320_reg vgg_init2[] = {
{
.address = ILI9320_POWER1,
.value = (ILI9320_POWER1_AP(3) | ILI9320_POWER1_APE |
ILI9320_POWER1_BT(7) | ILI9320_POWER1_SAP),
}, {
.address = ILI9320_POWER2,
.value = ILI9320_POWER2_VC(7) | ILI9320_POWER2_DC0(3),
}
};
static struct ili9320_reg vgg_gamma[] = {
{
.address = ILI9320_GAMMA1,
.value = 0x0000,
}, {
.address = ILI9320_GAMMA2,
.value = 0x0505,
}, {
.address = ILI9320_GAMMA3,
.value = 0x0004,
}, {
.address = ILI9320_GAMMA4,
.value = 0x0006,
}, {
.address = ILI9320_GAMMA5,
.value = 0x0707,
}, {
.address = ILI9320_GAMMA6,
.value = 0x0105,
}, {
.address = ILI9320_GAMMA7,
.value = 0x0002,
}, {
.address = ILI9320_GAMMA8,
.value = 0x0707,
}, {
.address = ILI9320_GAMMA9,
.value = 0x0704,
}, {
.address = ILI9320_GAMMA10,
.value = 0x807,
}
};
static struct ili9320_reg vgg_init0[] = {
[0] = {
/* set direction and scan mode gate */
.address = ILI9320_DRIVER,
.value = ILI9320_DRIVER_SS,
}, {
.address = ILI9320_DRIVEWAVE,
.value = (ILI9320_DRIVEWAVE_MUSTSET |
ILI9320_DRIVEWAVE_EOR | ILI9320_DRIVEWAVE_BC),
}, {
.address = ILI9320_ENTRYMODE,
.value = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
}, {
.address = ILI9320_RESIZING,
.value = 0x0,
},
};
static int vgg2432a4_lcd_init(struct ili9320 *lcd,
struct ili9320_platdata *cfg)
{
unsigned int addr;
int ret;
/* Set VCore before anything else (VGG243237-6UFLWA) */
ret = ili9320_write(lcd, 0x00e5, 0x8000);
if (ret)
goto err_initial;
/* Start the oscillator up before we can do anything else. */
ret = ili9320_write(lcd, ILI9320_OSCILATION, ILI9320_OSCILATION_OSC);
if (ret)
goto err_initial;
/* must wait at-lesat 10ms after starting */
mdelay(15);
ret = ili9320_write_regs(lcd, vgg_init0, ARRAY_SIZE(vgg_init0));
if (ret != 0)
goto err_initial;
ili9320_write(lcd, ILI9320_DISPLAY2, cfg->display2);
ili9320_write(lcd, ILI9320_DISPLAY3, cfg->display3);
ili9320_write(lcd, ILI9320_DISPLAY4, cfg->display4);
ili9320_write(lcd, ILI9320_RGB_IF1, cfg->rgb_if1);
ili9320_write(lcd, ILI9320_FRAMEMAKER, 0x0);
ili9320_write(lcd, ILI9320_RGB_IF2, cfg->rgb_if2);
ret = ili9320_write_regs(lcd, vgg_init1, ARRAY_SIZE(vgg_init1));
if (ret != 0)
goto err_vgg;
mdelay(300);
ret = ili9320_write_regs(lcd, vgg_init2, ARRAY_SIZE(vgg_init2));
if (ret != 0)
goto err_vgg2;
mdelay(100);
ili9320_write(lcd, ILI9320_POWER3, 0x13c);
mdelay(100);
ili9320_write(lcd, ILI9320_POWER4, 0x1c00);
ili9320_write(lcd, ILI9320_POWER7, 0x000e);
mdelay(100);
ili9320_write(lcd, ILI9320_GRAM_HORIZ_ADDR, 0x00);
ili9320_write(lcd, ILI9320_GRAM_VERT_ADD, 0x00);
ret = ili9320_write_regs(lcd, vgg_gamma, ARRAY_SIZE(vgg_gamma));
if (ret != 0)
goto err_vgg3;
ili9320_write(lcd, ILI9320_HORIZ_START, 0x0);
ili9320_write(lcd, ILI9320_HORIZ_END, cfg->hsize - 1);
ili9320_write(lcd, ILI9320_VERT_START, 0x0);
ili9320_write(lcd, ILI9320_VERT_END, cfg->vsize - 1);
ili9320_write(lcd, ILI9320_DRIVER2,
ILI9320_DRIVER2_NL(((cfg->vsize - 240) / 8) + 0x1D));
ili9320_write(lcd, ILI9320_BASE_IMAGE, 0x1);
ili9320_write(lcd, ILI9320_VERT_SCROLL, 0x00);
for (addr = ILI9320_PARTIAL1_POSITION; addr <= ILI9320_PARTIAL2_END;
addr++) {
ili9320_write(lcd, addr, 0x0);
}
ili9320_write(lcd, ILI9320_INTERFACE1, 0x10);
ili9320_write(lcd, ILI9320_INTERFACE2, cfg->interface2);
ili9320_write(lcd, ILI9320_INTERFACE3, cfg->interface3);
ili9320_write(lcd, ILI9320_INTERFACE4, cfg->interface4);
ili9320_write(lcd, ILI9320_INTERFACE5, cfg->interface5);
ili9320_write(lcd, ILI9320_INTERFACE6, cfg->interface6);
lcd->display1 = (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_DTE |
ILI9320_DISPLAY1_GON | ILI9320_DISPLAY1_BASEE |
0x40);
ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1);
return 0;
err_vgg3:
err_vgg2:
err_vgg:
err_initial:
return ret;
}
#ifdef CONFIG_PM
static int vgg2432a4_suspend(struct spi_device *spi, pm_message_t state)
{
return ili9320_suspend(dev_get_drvdata(&spi->dev), state);
}
static int vgg2432a4_resume(struct spi_device *spi)
{
return ili9320_resume(dev_get_drvdata(&spi->dev));
}
#else
#define vgg2432a4_suspend NULL
#define vgg2432a4_resume NULL
#endif
static struct ili9320_client vgg2432a4_client = {
.name = "VGG2432A4",
.init = vgg2432a4_lcd_init,
};
/* Device probe */
static int __devinit vgg2432a4_probe(struct spi_device *spi)
{
int ret;
ret = ili9320_probe_spi(spi, &vgg2432a4_client);
if (ret != 0) {
dev_err(&spi->dev, "failed to initialise ili9320\n");
return ret;
}
return 0;
}
static int __devexit vgg2432a4_remove(struct spi_device *spi)
{
return ili9320_remove(dev_get_drvdata(&spi->dev));
}
static void vgg2432a4_shutdown(struct spi_device *spi)
{
ili9320_shutdown(dev_get_drvdata(&spi->dev));
}
static struct spi_driver vgg2432a4_driver = {
.driver = {
.name = "VGG2432A4",
.owner = THIS_MODULE,
},
.probe = vgg2432a4_probe,
.remove = __devexit_p(vgg2432a4_remove),
.shutdown = vgg2432a4_shutdown,
.suspend = vgg2432a4_suspend,
.resume = vgg2432a4_resume,
};
/* Device driver initialisation */
static int __init vgg2432a4_init(void)
{
return spi_register_driver(&vgg2432a4_driver);
}
static void __exit vgg2432a4_exit(void)
{
spi_unregister_driver(&vgg2432a4_driver);
}
module_init(vgg2432a4_init);
module_exit(vgg2432a4_exit);
MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
MODULE_DESCRIPTION("VGG2432A4 LCD Driver");
MODULE_LICENSE("GPL v2");