linux/drivers/soundwire/intel_bus_common.c
Pierre-Louis Bossart 5aedb8d833 soundwire: intel_bus_common: enable interrupts before exiting reset
The existing code enables the Cadence IP interrupts after the bus
reset sequence. The problem with this sequence is that it might be
pre-empted, giving SoundWire devices time to sync and report as
ATTACHED before the interrupts are enabled. In that case, the Cadence
IP will not detect a state change and will not throw an interrupt to
proceed with the enumeration of a Device0.

In our overnight stress tests, we observed that a slight
sub-millisecond delay in enabling interrupts after the reset was
correlated with detection failures. This problem is more prevalent on
the LunarLake silicon, likely due to SOC integration changes, but it
was observed on earlier generations as well.

This patch reverts the sequence, with the interrupts enabled before
performing the bus reset. This removes the race condition and makes
sure the Cadence IP is able to detect the presence of a Device0 in all
cases.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240805115003.88035-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-18 12:14:53 +05:30

281 lines
6.4 KiB
C

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
// Copyright(c) 2015-2023 Intel Corporation
#include <linux/acpi.h>
#include <linux/soundwire/sdw_registers.h>
#include <linux/soundwire/sdw.h>
#include <linux/soundwire/sdw_intel.h>
#include "cadence_master.h"
#include "bus.h"
#include "intel.h"
int intel_start_bus(struct sdw_intel *sdw)
{
struct device *dev = sdw->cdns.dev;
struct sdw_cdns *cdns = &sdw->cdns;
struct sdw_bus *bus = &cdns->bus;
int ret;
/*
* follow recommended programming flows to avoid timeouts when
* gsync is enabled
*/
if (bus->multi_link)
sdw_intel_sync_arm(sdw);
ret = sdw_cdns_init(cdns);
if (ret < 0) {
dev_err(dev, "%s: unable to initialize Cadence IP: %d\n", __func__, ret);
return ret;
}
sdw_cdns_config_update(cdns);
if (bus->multi_link) {
ret = sdw_intel_sync_go(sdw);
if (ret < 0) {
dev_err(dev, "%s: sync go failed: %d\n", __func__, ret);
return ret;
}
}
ret = sdw_cdns_config_update_set_wait(cdns);
if (ret < 0) {
dev_err(dev, "%s: CONFIG_UPDATE BIT still set\n", __func__);
return ret;
}
ret = sdw_cdns_enable_interrupt(cdns, true);
if (ret < 0) {
dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret);
return ret;
}
ret = sdw_cdns_exit_reset(cdns);
if (ret < 0) {
dev_err(dev, "%s: unable to exit bus reset sequence: %d\n", __func__, ret);
return ret;
}
sdw_cdns_check_self_clearing_bits(cdns, __func__,
true, INTEL_MASTER_RESET_ITERATIONS);
schedule_delayed_work(&cdns->attach_dwork,
msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS));
return 0;
}
int intel_start_bus_after_reset(struct sdw_intel *sdw)
{
struct device *dev = sdw->cdns.dev;
struct sdw_cdns *cdns = &sdw->cdns;
struct sdw_bus *bus = &cdns->bus;
bool clock_stop0;
int status;
int ret;
/*
* An exception condition occurs for the CLK_STOP_BUS_RESET
* case if one or more masters remain active. In this condition,
* all the masters are powered on for they are in the same power
* domain. Master can preserve its context for clock stop0, so
* there is no need to clear slave status and reset bus.
*/
clock_stop0 = sdw_cdns_is_clock_stop(&sdw->cdns);
if (!clock_stop0) {
/*
* make sure all Slaves are tagged as UNATTACHED and
* provide reason for reinitialization
*/
status = SDW_UNATTACH_REQUEST_MASTER_RESET;
sdw_clear_slave_status(bus, status);
/*
* follow recommended programming flows to avoid
* timeouts when gsync is enabled
*/
if (bus->multi_link)
sdw_intel_sync_arm(sdw);
/*
* Re-initialize the IP since it was powered-off
*/
sdw_cdns_init(&sdw->cdns);
} else {
ret = sdw_cdns_enable_interrupt(cdns, true);
if (ret < 0) {
dev_err(dev, "cannot enable interrupts during resume\n");
return ret;
}
}
ret = sdw_cdns_clock_restart(cdns, !clock_stop0);
if (ret < 0) {
dev_err(dev, "unable to restart clock during resume\n");
if (!clock_stop0)
sdw_cdns_enable_interrupt(cdns, false);
return ret;
}
if (!clock_stop0) {
sdw_cdns_config_update(cdns);
if (bus->multi_link) {
ret = sdw_intel_sync_go(sdw);
if (ret < 0) {
dev_err(sdw->cdns.dev, "sync go failed during resume\n");
return ret;
}
}
ret = sdw_cdns_config_update_set_wait(cdns);
if (ret < 0) {
dev_err(dev, "%s: CONFIG_UPDATE BIT still set\n", __func__);
return ret;
}
ret = sdw_cdns_enable_interrupt(cdns, true);
if (ret < 0) {
dev_err(dev, "cannot enable interrupts during resume\n");
return ret;
}
ret = sdw_cdns_exit_reset(cdns);
if (ret < 0) {
dev_err(dev, "unable to exit bus reset sequence during resume\n");
return ret;
}
}
sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS);
schedule_delayed_work(&cdns->attach_dwork,
msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS));
return 0;
}
void intel_check_clock_stop(struct sdw_intel *sdw)
{
struct device *dev = sdw->cdns.dev;
bool clock_stop0;
clock_stop0 = sdw_cdns_is_clock_stop(&sdw->cdns);
if (!clock_stop0)
dev_err(dev, "%s: invalid configuration, clock was not stopped\n", __func__);
}
int intel_start_bus_after_clock_stop(struct sdw_intel *sdw)
{
struct device *dev = sdw->cdns.dev;
struct sdw_cdns *cdns = &sdw->cdns;
int ret;
ret = sdw_cdns_clock_restart(cdns, false);
if (ret < 0) {
dev_err(dev, "%s: unable to restart clock: %d\n", __func__, ret);
return ret;
}
ret = sdw_cdns_enable_interrupt(cdns, true);
if (ret < 0) {
dev_err(dev, "%s: cannot enable interrupts: %d\n", __func__, ret);
return ret;
}
sdw_cdns_check_self_clearing_bits(cdns, __func__, true, INTEL_MASTER_RESET_ITERATIONS);
schedule_delayed_work(&cdns->attach_dwork,
msecs_to_jiffies(SDW_INTEL_DELAYED_ENUMERATION_MS));
return 0;
}
int intel_stop_bus(struct sdw_intel *sdw, bool clock_stop)
{
struct device *dev = sdw->cdns.dev;
struct sdw_cdns *cdns = &sdw->cdns;
bool wake_enable = false;
int ret;
cancel_delayed_work_sync(&cdns->attach_dwork);
if (clock_stop) {
ret = sdw_cdns_clock_stop(cdns, true);
if (ret < 0)
dev_err(dev, "%s: cannot stop clock: %d\n", __func__, ret);
else
wake_enable = true;
}
ret = sdw_cdns_enable_interrupt(cdns, false);
if (ret < 0) {
dev_err(dev, "%s: cannot disable interrupts: %d\n", __func__, ret);
return ret;
}
ret = sdw_intel_link_power_down(sdw);
if (ret) {
dev_err(dev, "%s: Link power down failed: %d\n", __func__, ret);
return ret;
}
sdw_intel_shim_wake(sdw, wake_enable);
return 0;
}
/*
* bank switch routines
*/
int intel_pre_bank_switch(struct sdw_intel *sdw)
{
struct sdw_cdns *cdns = &sdw->cdns;
struct sdw_bus *bus = &cdns->bus;
/* Write to register only for multi-link */
if (!bus->multi_link)
return 0;
sdw_intel_sync_arm(sdw);
return 0;
}
int intel_post_bank_switch(struct sdw_intel *sdw)
{
struct sdw_cdns *cdns = &sdw->cdns;
struct sdw_bus *bus = &cdns->bus;
int ret = 0;
/* Write to register only for multi-link */
if (!bus->multi_link)
return 0;
mutex_lock(sdw->link_res->shim_lock);
/*
* post_bank_switch() ops is called from the bus in loop for
* all the Masters in the steam with the expectation that
* we trigger the bankswitch for the only first Master in the list
* and do nothing for the other Masters
*
* So, set the SYNCGO bit only if CMDSYNC bit is set for any Master.
*/
if (sdw_intel_sync_check_cmdsync_unlocked(sdw))
ret = sdw_intel_sync_go_unlocked(sdw);
mutex_unlock(sdw->link_res->shim_lock);
if (ret < 0)
dev_err(sdw->cdns.dev, "Post bank switch failed: %d\n", ret);
return ret;
}