// SPDX-License-Identifier: GPL-2.0-only /* * Atmel SDMMC controller driver. * * Copyright (C) 2015 Atmel, * 2015 Ludovic Desroches */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "sdhci-pltfm.h" #define SDMMC_MC1R 0x204 #define SDMMC_MC1R_DDR BIT(3) #define SDMMC_MC1R_FCD BIT(7) #define SDMMC_CACR 0x230 #define SDMMC_CACR_CAPWREN BIT(0) #define SDMMC_CACR_KEY (0x46 << 8) #define SDMMC_CALCR 0x240 #define SDMMC_CALCR_EN BIT(0) #define SDMMC_CALCR_ALWYSON BIT(4) #define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */ struct sdhci_at91_soc_data { const struct sdhci_pltfm_data *pdata; bool baseclk_is_generated_internally; unsigned int divider_for_baseclk; }; struct sdhci_at91_priv { const struct sdhci_at91_soc_data *soc_data; struct clk *hclock; struct clk *gck; struct clk *mainck; bool restore_needed; bool cal_always_on; }; static void sdhci_at91_set_force_card_detect(struct sdhci_host *host) { u8 mc1r; mc1r = readb(host->ioaddr + SDMMC_MC1R); mc1r |= SDMMC_MC1R_FCD; writeb(mc1r, host->ioaddr + SDMMC_MC1R); } static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock) { u16 clk; unsigned long timeout; host->mmc->actual_clock = 0; /* * There is no requirement to disable the internal clock before * changing the SD clock configuration. Moreover, disabling the * internal clock, changing the configuration and re-enabling the * internal clock causes some bugs. It can prevent to get the internal * clock stable flag ready and an unexpected switch to the base clock * when using presets. */ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); clk &= SDHCI_CLOCK_INT_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); if (clock == 0) return; clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); clk |= SDHCI_CLOCK_INT_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); /* Wait max 20 ms */ timeout = 20; while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) & SDHCI_CLOCK_INT_STABLE)) { if (timeout == 0) { pr_err("%s: Internal clock never stabilised.\n", mmc_hostname(host->mmc)); return; } timeout--; mdelay(1); } clk |= SDHCI_CLOCK_CARD_EN; sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); } static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, unsigned int timing) { if (timing == MMC_TIMING_MMC_DDR52) sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R); sdhci_set_uhs_signaling(host, timing); } static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); sdhci_reset(host, mask); if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) || mmc_gpio_get_cd(host->mmc) >= 0) sdhci_at91_set_force_card_detect(host); if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) sdhci_writel(host, SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN, SDMMC_CALCR); } static const struct sdhci_ops sdhci_at91_sama5d2_ops = { .set_clock = sdhci_at91_set_clock, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_at91_reset, .set_uhs_signaling = sdhci_at91_set_uhs_signaling, .set_power = sdhci_set_power_and_bus_voltage, }; static const struct sdhci_pltfm_data sdhci_sama5d2_pdata = { .ops = &sdhci_at91_sama5d2_ops, }; static const struct sdhci_at91_soc_data soc_data_sama5d2 = { .pdata = &sdhci_sama5d2_pdata, .baseclk_is_generated_internally = false, }; static const struct sdhci_at91_soc_data soc_data_sam9x60 = { .pdata = &sdhci_sama5d2_pdata, .baseclk_is_generated_internally = true, .divider_for_baseclk = 2, }; static const struct of_device_id sdhci_at91_dt_match[] = { { .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 }, { .compatible = "microchip,sam9x60-sdhci", .data = &soc_data_sam9x60 }, {} }; MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match); static int sdhci_at91_set_clks_presets(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); unsigned int caps0, caps1; unsigned int clk_base, clk_mul; unsigned int gck_rate, clk_base_rate; unsigned int preset_div; clk_prepare_enable(priv->hclock); caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES); caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1); gck_rate = clk_get_rate(priv->gck); if (priv->soc_data->baseclk_is_generated_internally) clk_base_rate = gck_rate / priv->soc_data->divider_for_baseclk; else clk_base_rate = clk_get_rate(priv->mainck); clk_base = clk_base_rate / 1000000; clk_mul = gck_rate / clk_base_rate - 1; caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK; caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base); caps1 &= ~SDHCI_CLOCK_MUL_MASK; caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul); /* Set capabilities in r/w mode. */ writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR); writel(caps0, host->ioaddr + SDHCI_CAPABILITIES); writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); /* Set capabilities in ro mode. */ writel(0, host->ioaddr + SDMMC_CACR); dev_dbg(dev, "update clk mul to %u as gck rate is %u Hz and clk base is %u Hz\n", clk_mul, gck_rate, clk_base_rate); /* * We have to set preset values because it depends on the clk_mul * value. Moreover, SDR104 is supported in a degraded mode since the * maximum sd clock value is 120 MHz instead of 208 MHz. For that * reason, we need to use presets to support SDR104. */ preset_div = DIV_ROUND_UP(gck_rate, 24000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR12); preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR25); preset_div = DIV_ROUND_UP(gck_rate, 100000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR50); preset_div = DIV_ROUND_UP(gck_rate, 120000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR104); preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_DDR50); clk_prepare_enable(priv->mainck); clk_prepare_enable(priv->gck); return 0; } #ifdef CONFIG_PM_SLEEP static int sdhci_at91_suspend(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); int ret; ret = pm_runtime_force_suspend(dev); priv->restore_needed = true; return ret; } #endif /* CONFIG_PM_SLEEP */ #ifdef CONFIG_PM static int sdhci_at91_runtime_suspend(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); int ret; ret = sdhci_runtime_suspend_host(host); if (host->tuning_mode != SDHCI_TUNING_MODE_3) mmc_retune_needed(host->mmc); clk_disable_unprepare(priv->gck); clk_disable_unprepare(priv->hclock); clk_disable_unprepare(priv->mainck); return ret; } static int sdhci_at91_runtime_resume(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); int ret; if (priv->restore_needed) { ret = sdhci_at91_set_clks_presets(dev); if (ret) return ret; priv->restore_needed = false; goto out; } ret = clk_prepare_enable(priv->mainck); if (ret) { dev_err(dev, "can't enable mainck\n"); return ret; } ret = clk_prepare_enable(priv->hclock); if (ret) { dev_err(dev, "can't enable hclock\n"); return ret; } ret = clk_prepare_enable(priv->gck); if (ret) { dev_err(dev, "can't enable gck\n"); return ret; } out: return sdhci_runtime_resume_host(host, 0); } #endif /* CONFIG_PM */ static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(sdhci_at91_suspend, pm_runtime_force_resume) SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend, sdhci_at91_runtime_resume, NULL) }; static int sdhci_at91_probe(struct platform_device *pdev) { const struct of_device_id *match; const struct sdhci_at91_soc_data *soc_data; struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; struct sdhci_at91_priv *priv; int ret; match = of_match_device(sdhci_at91_dt_match, &pdev->dev); if (!match) return -EINVAL; soc_data = match->data; host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*priv)); if (IS_ERR(host)) return PTR_ERR(host); pltfm_host = sdhci_priv(host); priv = sdhci_pltfm_priv(pltfm_host); priv->soc_data = soc_data; priv->mainck = devm_clk_get(&pdev->dev, "baseclk"); if (IS_ERR(priv->mainck)) { if (soc_data->baseclk_is_generated_internally) { priv->mainck = NULL; } else { dev_err(&pdev->dev, "failed to get baseclk\n"); ret = PTR_ERR(priv->mainck); goto sdhci_pltfm_free; } } priv->hclock = devm_clk_get(&pdev->dev, "hclock"); if (IS_ERR(priv->hclock)) { dev_err(&pdev->dev, "failed to get hclock\n"); ret = PTR_ERR(priv->hclock); goto sdhci_pltfm_free; } priv->gck = devm_clk_get(&pdev->dev, "multclk"); if (IS_ERR(priv->gck)) { dev_err(&pdev->dev, "failed to get multclk\n"); ret = PTR_ERR(priv->gck); goto sdhci_pltfm_free; } ret = sdhci_at91_set_clks_presets(&pdev->dev); if (ret) goto sdhci_pltfm_free; priv->restore_needed = false; /* * if SDCAL pin is wrongly connected, we must enable * the analog calibration cell permanently. */ priv->cal_always_on = device_property_read_bool(&pdev->dev, "microchip,sdcal-inverted"); ret = mmc_of_parse(host->mmc); if (ret) goto clocks_disable_unprepare; sdhci_get_of_property(pdev); pm_runtime_get_noresume(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 50); pm_runtime_use_autosuspend(&pdev->dev); /* HS200 is broken at this moment */ host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200; ret = sdhci_add_host(host); if (ret) goto pm_runtime_disable; /* * When calling sdhci_runtime_suspend_host(), the sdhci layer makes * the assumption that all the clocks of the controller are disabled. * It means we can't get irq from it when it is runtime suspended. * For that reason, it is not planned to wake-up on a card detect irq * from the controller. * If we want to use runtime PM and to be able to wake-up on card * insertion, we have to use a GPIO for the card detection or we can * use polling. Be aware that using polling will resume/suspend the * controller between each attempt. * Disable SDHCI_QUIRK_BROKEN_CARD_DETECTION to be sure nobody tries * to enable polling via device tree with broken-cd property. */ if (mmc_card_is_removable(host->mmc) && mmc_gpio_get_cd(host->mmc) < 0) { host->mmc->caps |= MMC_CAP_NEEDS_POLL; host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; } /* * If the device attached to the MMC bus is not removable, it is safer * to set the Force Card Detect bit. People often don't connect the * card detect signal and use this pin for another purpose. If the card * detect pin is not muxed to SDHCI controller, a default value is * used. This value can be different from a SoC revision to another * one. Problems come when this default value is not card present. To * avoid this case, if the device is non removable then the card * detection procedure using the SDMCC_CD signal is bypassed. * This bit is reset when a software reset for all command is performed * so we need to implement our own reset function to set back this bit. * * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line. */ if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) || mmc_gpio_get_cd(host->mmc) >= 0) sdhci_at91_set_force_card_detect(host); pm_runtime_put_autosuspend(&pdev->dev); return 0; pm_runtime_disable: pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); clocks_disable_unprepare: clk_disable_unprepare(priv->gck); clk_disable_unprepare(priv->mainck); clk_disable_unprepare(priv->hclock); sdhci_pltfm_free: sdhci_pltfm_free(pdev); return ret; } static int sdhci_at91_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); struct clk *gck = priv->gck; struct clk *hclock = priv->hclock; struct clk *mainck = priv->mainck; pm_runtime_get_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); sdhci_pltfm_unregister(pdev); clk_disable_unprepare(gck); clk_disable_unprepare(hclock); clk_disable_unprepare(mainck); return 0; } static struct platform_driver sdhci_at91_driver = { .driver = { .name = "sdhci-at91", .of_match_table = sdhci_at91_dt_match, .pm = &sdhci_at91_dev_pm_ops, }, .probe = sdhci_at91_probe, .remove = sdhci_at91_remove, }; module_platform_driver(sdhci_at91_driver); MODULE_DESCRIPTION("SDHCI driver for at91"); MODULE_AUTHOR("Ludovic Desroches "); MODULE_LICENSE("GPL v2");