/* * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. * * Authors: Shlomi Gridish * Li Yang * * Description: * QUICC Engine (QE) external definitions and structure. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #ifndef _ASM_POWERPC_QE_H #define _ASM_POWERPC_QE_H #ifdef __KERNEL__ #include #define QE_NUM_OF_SNUM 28 #define QE_NUM_OF_BRGS 16 #define QE_NUM_OF_PORTS 1024 /* Memory partitions */ #define MEM_PART_SYSTEM 0 #define MEM_PART_SECONDARY 1 #define MEM_PART_MURAM 2 /* Clocks and BRGs */ enum qe_clock { QE_CLK_NONE = 0, QE_BRG1, /* Baud Rate Generator 1 */ QE_BRG2, /* Baud Rate Generator 2 */ QE_BRG3, /* Baud Rate Generator 3 */ QE_BRG4, /* Baud Rate Generator 4 */ QE_BRG5, /* Baud Rate Generator 5 */ QE_BRG6, /* Baud Rate Generator 6 */ QE_BRG7, /* Baud Rate Generator 7 */ QE_BRG8, /* Baud Rate Generator 8 */ QE_BRG9, /* Baud Rate Generator 9 */ QE_BRG10, /* Baud Rate Generator 10 */ QE_BRG11, /* Baud Rate Generator 11 */ QE_BRG12, /* Baud Rate Generator 12 */ QE_BRG13, /* Baud Rate Generator 13 */ QE_BRG14, /* Baud Rate Generator 14 */ QE_BRG15, /* Baud Rate Generator 15 */ QE_BRG16, /* Baud Rate Generator 16 */ QE_CLK1, /* Clock 1 */ QE_CLK2, /* Clock 2 */ QE_CLK3, /* Clock 3 */ QE_CLK4, /* Clock 4 */ QE_CLK5, /* Clock 5 */ QE_CLK6, /* Clock 6 */ QE_CLK7, /* Clock 7 */ QE_CLK8, /* Clock 8 */ QE_CLK9, /* Clock 9 */ QE_CLK10, /* Clock 10 */ QE_CLK11, /* Clock 11 */ QE_CLK12, /* Clock 12 */ QE_CLK13, /* Clock 13 */ QE_CLK14, /* Clock 14 */ QE_CLK15, /* Clock 15 */ QE_CLK16, /* Clock 16 */ QE_CLK17, /* Clock 17 */ QE_CLK18, /* Clock 18 */ QE_CLK19, /* Clock 19 */ QE_CLK20, /* Clock 20 */ QE_CLK21, /* Clock 21 */ QE_CLK22, /* Clock 22 */ QE_CLK23, /* Clock 23 */ QE_CLK24, /* Clock 24 */ QE_CLK_DUMMY }; /* Export QE common operations */ extern void qe_reset(void); extern int par_io_init(struct device_node *np); extern int par_io_of_config(struct device_node *np); extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, int assignment, int has_irq); extern int par_io_data_set(u8 port, u8 pin, u8 val); /* QE internal API */ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); enum qe_clock qe_clock_source(const char *source); int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); unsigned long qe_muram_alloc(int size, int align); int qe_muram_free(unsigned long offset); unsigned long qe_muram_alloc_fixed(unsigned long offset, int size); void qe_muram_dump(void); static inline void __iomem *qe_muram_addr(unsigned long offset) { return (void __iomem *)&qe_immr->muram[offset]; } static inline unsigned long qe_muram_offset(void __iomem *addr) { return addr - (void __iomem *)qe_immr->muram; } /* Structure that defines QE firmware binary files. * * See Documentation/powerpc/qe-firmware.txt for a description of these * fields. */ struct qe_firmware { struct qe_header { __be32 length; /* Length of the entire structure, in bytes */ u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ u8 version; /* Version of this layout. First ver is '1' */ } header; u8 id[62]; /* Null-terminated identifier string */ u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ u8 count; /* Number of microcode[] structures */ struct { __be16 model; /* The SOC model */ u8 major; /* The SOC revision major */ u8 minor; /* The SOC revision minor */ } __attribute__ ((packed)) soc; u8 padding[4]; /* Reserved, for alignment */ __be64 extended_modes; /* Extended modes */ __be32 vtraps[8]; /* Virtual trap addresses */ u8 reserved[4]; /* Reserved, for future expansion */ struct qe_microcode { u8 id[32]; /* Null-terminated identifier */ __be32 traps[16]; /* Trap addresses, 0 == ignore */ __be32 eccr; /* The value for the ECCR register */ __be32 iram_offset; /* Offset into I-RAM for the code */ __be32 count; /* Number of 32-bit words of the code */ __be32 code_offset; /* Offset of the actual microcode */ u8 major; /* The microcode version major */ u8 minor; /* The microcode version minor */ u8 revision; /* The microcode version revision */ u8 padding; /* Reserved, for alignment */ u8 reserved[4]; /* Reserved, for future expansion */ } __attribute__ ((packed)) microcode[1]; /* All microcode binaries should be located here */ /* CRC32 should be located here, after the microcode binaries */ } __attribute__ ((packed)); struct qe_firmware_info { char id[64]; /* Firmware name */ u32 vtraps[8]; /* Virtual trap addresses */ u64 extended_modes; /* Extended modes */ }; /* Upload a firmware to the QE */ int qe_upload_firmware(const struct qe_firmware *firmware); /* Obtain information on the uploaded firmware */ struct qe_firmware_info *qe_get_firmware_info(void); /* Buffer descriptors */ struct qe_bd { __be16 status; __be16 length; __be32 buf; } __attribute__ ((packed)); #define BD_STATUS_MASK 0xffff0000 #define BD_LENGTH_MASK 0x0000ffff #define BD_SC_EMPTY 0x8000 /* Receive is empty */ #define BD_SC_READY 0x8000 /* Transmit is ready */ #define BD_SC_WRAP 0x2000 /* Last buffer descriptor */ #define BD_SC_INTRPT 0x1000 /* Interrupt on change */ #define BD_SC_LAST 0x0800 /* Last buffer in frame */ #define BD_SC_CM 0x0200 /* Continous mode */ #define BD_SC_ID 0x0100 /* Rec'd too many idles */ #define BD_SC_P 0x0100 /* xmt preamble */ #define BD_SC_BR 0x0020 /* Break received */ #define BD_SC_FR 0x0010 /* Framing error */ #define BD_SC_PR 0x0008 /* Parity error */ #define BD_SC_OV 0x0002 /* Overrun */ #define BD_SC_CD 0x0001 /* ?? */ /* Alignment */ #define QE_INTR_TABLE_ALIGN 16 /* ??? */ #define QE_ALIGNMENT_OF_BD 8 #define QE_ALIGNMENT_OF_PRAM 64 /* RISC allocation */ enum qe_risc_allocation { QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose RISC 1 or RISC 2 */ }; /* QE extended filtering Table Lookup Key Size */ enum qe_fltr_tbl_lookup_key_size { QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES = 0x3f, /* LookupKey parsed by the Generate LookupKey CMD is truncated to 8 bytes */ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES = 0x5f, /* LookupKey parsed by the Generate LookupKey CMD is truncated to 16 bytes */ }; /* QE FLTR extended filtering Largest External Table Lookup Key Size */ enum qe_fltr_largest_external_tbl_lookup_key_size { QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE = 0x0,/* not used */ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ }; /* structure representing QE parameter RAM */ struct qe_timer_tables { u16 tm_base; /* QE timer table base adr */ u16 tm_ptr; /* QE timer table pointer */ u16 r_tmr; /* QE timer mode register */ u16 r_tmv; /* QE timer valid register */ u32 tm_cmd; /* QE timer cmd register */ u32 tm_cnt; /* QE timer internal cnt */ } __attribute__ ((packed)); #define QE_FLTR_TAD_SIZE 8 /* QE extended filtering Termination Action Descriptor (TAD) */ struct qe_fltr_tad { u8 serialized[QE_FLTR_TAD_SIZE]; } __attribute__ ((packed)); /* Communication Direction */ enum comm_dir { COMM_DIR_NONE = 0, COMM_DIR_RX = 1, COMM_DIR_TX = 2, COMM_DIR_RX_AND_TX = 3 }; /* QE CMXUCR Registers. * There are two UCCs represented in each of the four CMXUCR registers. * These values are for the UCC in the LSBs */ #define QE_CMXUCR_MII_ENET_MNG 0x00007000 #define QE_CMXUCR_MII_ENET_MNG_SHIFT 12 #define QE_CMXUCR_GRANT 0x00008000 #define QE_CMXUCR_TSA 0x00004000 #define QE_CMXUCR_BKPT 0x00000100 #define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F /* QE CMXGCR Registers. */ #define QE_CMXGCR_MII_ENET_MNG 0x00007000 #define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 #define QE_CMXGCR_USBCS 0x0000000f /* QE CECR Commands. */ #define QE_CR_FLG 0x00010000 #define QE_RESET 0x80000000 #define QE_INIT_TX_RX 0x00000000 #define QE_INIT_RX 0x00000001 #define QE_INIT_TX 0x00000002 #define QE_ENTER_HUNT_MODE 0x00000003 #define QE_STOP_TX 0x00000004 #define QE_GRACEFUL_STOP_TX 0x00000005 #define QE_RESTART_TX 0x00000006 #define QE_CLOSE_RX_BD 0x00000007 #define QE_SWITCH_COMMAND 0x00000007 #define QE_SET_GROUP_ADDRESS 0x00000008 #define QE_START_IDMA 0x00000009 #define QE_MCC_STOP_RX 0x00000009 #define QE_ATM_TRANSMIT 0x0000000a #define QE_HPAC_CLEAR_ALL 0x0000000b #define QE_GRACEFUL_STOP_RX 0x0000001a #define QE_RESTART_RX 0x0000001b #define QE_HPAC_SET_PRIORITY 0x0000010b #define QE_HPAC_STOP_TX 0x0000020b #define QE_HPAC_STOP_RX 0x0000030b #define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b #define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b #define QE_HPAC_START_TX 0x0000060b #define QE_HPAC_START_RX 0x0000070b #define QE_USB_STOP_TX 0x0000000a #define QE_USB_RESTART_TX 0x0000000b #define QE_QMC_STOP_TX 0x0000000c #define QE_QMC_STOP_RX 0x0000000d #define QE_SS7_SU_FIL_RESET 0x0000000e /* jonathbr added from here down for 83xx */ #define QE_RESET_BCS 0x0000000a #define QE_MCC_INIT_TX_RX_16 0x00000003 #define QE_MCC_STOP_TX 0x00000004 #define QE_MCC_INIT_TX_1 0x00000005 #define QE_MCC_INIT_RX_1 0x00000006 #define QE_MCC_RESET 0x00000007 #define QE_SET_TIMER 0x00000008 #define QE_RANDOM_NUMBER 0x0000000c #define QE_ATM_MULTI_THREAD_INIT 0x00000011 #define QE_ASSIGN_PAGE 0x00000012 #define QE_ADD_REMOVE_HASH_ENTRY 0x00000013 #define QE_START_FLOW_CONTROL 0x00000014 #define QE_STOP_FLOW_CONTROL 0x00000015 #define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 #define QE_ASSIGN_RISC 0x00000010 #define QE_CR_MCN_NORMAL_SHIFT 6 #define QE_CR_MCN_USB_SHIFT 4 #define QE_CR_MCN_RISC_ASSIGN_SHIFT 8 #define QE_CR_SNUM_SHIFT 17 /* QE CECR Sub Block - sub block of QE command. */ #define QE_CR_SUBBLOCK_INVALID 0x00000000 #define QE_CR_SUBBLOCK_USB 0x03200000 #define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 #define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 #define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 #define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 #define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 #define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 #define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 #define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 #define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 #define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 #define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 #define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 #define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 #define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 #define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 #define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 #define QE_CR_SUBBLOCK_MCC1 0x03800000 #define QE_CR_SUBBLOCK_MCC2 0x03a00000 #define QE_CR_SUBBLOCK_MCC3 0x03000000 #define QE_CR_SUBBLOCK_IDMA1 0x02800000 #define QE_CR_SUBBLOCK_IDMA2 0x02a00000 #define QE_CR_SUBBLOCK_IDMA3 0x02c00000 #define QE_CR_SUBBLOCK_IDMA4 0x02e00000 #define QE_CR_SUBBLOCK_HPAC 0x01e00000 #define QE_CR_SUBBLOCK_SPI1 0x01400000 #define QE_CR_SUBBLOCK_SPI2 0x01600000 #define QE_CR_SUBBLOCK_RAND 0x01c00000 #define QE_CR_SUBBLOCK_TIMER 0x01e00000 #define QE_CR_SUBBLOCK_GENERAL 0x03c00000 /* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */ #define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ #define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 #define QE_CR_PROTOCOL_QMC 0x02 #define QE_CR_PROTOCOL_UART 0x04 #define QE_CR_PROTOCOL_ATM_POS 0x0A #define QE_CR_PROTOCOL_ETHERNET 0x0C #define QE_CR_PROTOCOL_L2_SWITCH 0x0D /* BRG configuration register */ #define QE_BRGC_ENABLE 0x00010000 #define QE_BRGC_DIVISOR_SHIFT 1 #define QE_BRGC_DIVISOR_MAX 0xFFF #define QE_BRGC_DIV16 1 /* QE Timers registers */ #define QE_GTCFR1_PCAS 0x80 #define QE_GTCFR1_STP2 0x20 #define QE_GTCFR1_RST2 0x10 #define QE_GTCFR1_GM2 0x08 #define QE_GTCFR1_GM1 0x04 #define QE_GTCFR1_STP1 0x02 #define QE_GTCFR1_RST1 0x01 /* SDMA registers */ #define QE_SDSR_BER1 0x02000000 #define QE_SDSR_BER2 0x01000000 #define QE_SDMR_GLB_1_MSK 0x80000000 #define QE_SDMR_ADR_SEL 0x20000000 #define QE_SDMR_BER1_MSK 0x02000000 #define QE_SDMR_BER2_MSK 0x01000000 #define QE_SDMR_EB1_MSK 0x00800000 #define QE_SDMR_ER1_MSK 0x00080000 #define QE_SDMR_ER2_MSK 0x00040000 #define QE_SDMR_CEN_MASK 0x0000E000 #define QE_SDMR_SBER_1 0x00000200 #define QE_SDMR_SBER_2 0x00000200 #define QE_SDMR_EB1_PR_MASK 0x000000C0 #define QE_SDMR_ER1_PR 0x00000008 #define QE_SDMR_CEN_SHIFT 13 #define QE_SDMR_EB1_PR_SHIFT 6 #define QE_SDTM_MSNUM_SHIFT 24 #define QE_SDEBCR_BA_MASK 0x01FFFFFF /* Communication Processor */ #define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ #define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ #define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ /* I-RAM */ #define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ #define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ /* UPC */ #define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ #define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ #define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ #define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ #define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ /* UCC GUEMR register */ #define UCC_GUEMR_MODE_MASK_RX 0x02 #define UCC_GUEMR_MODE_FAST_RX 0x02 #define UCC_GUEMR_MODE_SLOW_RX 0x00 #define UCC_GUEMR_MODE_MASK_TX 0x01 #define UCC_GUEMR_MODE_FAST_TX 0x01 #define UCC_GUEMR_MODE_SLOW_TX 0x00 #define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX) #define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but must be set 1 */ /* structure representing UCC SLOW parameter RAM */ struct ucc_slow_pram { __be16 rbase; /* RX BD base address */ __be16 tbase; /* TX BD base address */ u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */ u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */ __be16 mrblr; /* Rx buffer length */ __be32 rstate; /* Rx internal state */ __be32 rptr; /* Rx internal data pointer */ __be16 rbptr; /* rb BD Pointer */ __be16 rcount; /* Rx internal byte count */ __be32 rtemp; /* Rx temp */ __be32 tstate; /* Tx internal state */ __be32 tptr; /* Tx internal data pointer */ __be16 tbptr; /* Tx BD pointer */ __be16 tcount; /* Tx byte count */ __be32 ttemp; /* Tx temp */ __be32 rcrc; /* temp receive CRC */ __be32 tcrc; /* temp transmit CRC */ } __attribute__ ((packed)); /* General UCC SLOW Mode Register (GUMRH & GUMRL) */ #define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000 #define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000 #define UCC_SLOW_GUMR_H_REVD 0x00002000 #define UCC_SLOW_GUMR_H_TRX 0x00001000 #define UCC_SLOW_GUMR_H_TTX 0x00000800 #define UCC_SLOW_GUMR_H_CDP 0x00000400 #define UCC_SLOW_GUMR_H_CTSP 0x00000200 #define UCC_SLOW_GUMR_H_CDS 0x00000100 #define UCC_SLOW_GUMR_H_CTSS 0x00000080 #define UCC_SLOW_GUMR_H_TFL 0x00000040 #define UCC_SLOW_GUMR_H_RFW 0x00000020 #define UCC_SLOW_GUMR_H_TXSY 0x00000010 #define UCC_SLOW_GUMR_H_4SYNC 0x00000004 #define UCC_SLOW_GUMR_H_8SYNC 0x00000008 #define UCC_SLOW_GUMR_H_16SYNC 0x0000000c #define UCC_SLOW_GUMR_H_RTSM 0x00000002 #define UCC_SLOW_GUMR_H_RSYN 0x00000001 #define UCC_SLOW_GUMR_L_TCI 0x10000000 #define UCC_SLOW_GUMR_L_RINV 0x02000000 #define UCC_SLOW_GUMR_L_TINV 0x01000000 #define UCC_SLOW_GUMR_L_TEND 0x00040000 #define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000 #define UCC_SLOW_GUMR_L_TDCR_32 0x00030000 #define UCC_SLOW_GUMR_L_TDCR_16 0x00020000 #define UCC_SLOW_GUMR_L_TDCR_8 0x00010000 #define UCC_SLOW_GUMR_L_TDCR_1 0x00000000 #define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000 #define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000 #define UCC_SLOW_GUMR_L_RDCR_16 0x00008000 #define UCC_SLOW_GUMR_L_RDCR_8 0x00004000 #define UCC_SLOW_GUMR_L_RDCR_1 0x00000000 #define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800 #define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000 #define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100 #define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000 #define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0 #define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0 #define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080 #define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040 #define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000 #define UCC_SLOW_GUMR_L_ENR 0x00000020 #define UCC_SLOW_GUMR_L_ENT 0x00000010 #define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F #define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008 #define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006 #define UCC_SLOW_GUMR_L_MODE_UART 0x00000004 #define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002 /* General UCC FAST Mode Register */ #define UCC_FAST_GUMR_TCI 0x20000000 #define UCC_FAST_GUMR_TRX 0x10000000 #define UCC_FAST_GUMR_TTX 0x08000000 #define UCC_FAST_GUMR_CDP 0x04000000 #define UCC_FAST_GUMR_CTSP 0x02000000 #define UCC_FAST_GUMR_CDS 0x01000000 #define UCC_FAST_GUMR_CTSS 0x00800000 #define UCC_FAST_GUMR_TXSY 0x00020000 #define UCC_FAST_GUMR_RSYN 0x00010000 #define UCC_FAST_GUMR_RTSM 0x00002000 #define UCC_FAST_GUMR_REVD 0x00000400 #define UCC_FAST_GUMR_ENR 0x00000020 #define UCC_FAST_GUMR_ENT 0x00000010 /* UART Slow UCC Event Register (UCCE) */ #define UCC_UART_UCCE_AB 0x0200 #define UCC_UART_UCCE_IDLE 0x0100 #define UCC_UART_UCCE_GRA 0x0080 #define UCC_UART_UCCE_BRKE 0x0040 #define UCC_UART_UCCE_BRKS 0x0020 #define UCC_UART_UCCE_CCR 0x0008 #define UCC_UART_UCCE_BSY 0x0004 #define UCC_UART_UCCE_TX 0x0002 #define UCC_UART_UCCE_RX 0x0001 /* HDLC Slow UCC Event Register (UCCE) */ #define UCC_HDLC_UCCE_GLR 0x1000 #define UCC_HDLC_UCCE_GLT 0x0800 #define UCC_HDLC_UCCE_IDLE 0x0100 #define UCC_HDLC_UCCE_BRKE 0x0040 #define UCC_HDLC_UCCE_BRKS 0x0020 #define UCC_HDLC_UCCE_TXE 0x0010 #define UCC_HDLC_UCCE_RXF 0x0008 #define UCC_HDLC_UCCE_BSY 0x0004 #define UCC_HDLC_UCCE_TXB 0x0002 #define UCC_HDLC_UCCE_RXB 0x0001 /* BISYNC Slow UCC Event Register (UCCE) */ #define UCC_BISYNC_UCCE_GRA 0x0080 #define UCC_BISYNC_UCCE_TXE 0x0010 #define UCC_BISYNC_UCCE_RCH 0x0008 #define UCC_BISYNC_UCCE_BSY 0x0004 #define UCC_BISYNC_UCCE_TXB 0x0002 #define UCC_BISYNC_UCCE_RXB 0x0001 /* Gigabit Ethernet Fast UCC Event Register (UCCE) */ #define UCC_GETH_UCCE_MPD 0x80000000 #define UCC_GETH_UCCE_SCAR 0x40000000 #define UCC_GETH_UCCE_GRA 0x20000000 #define UCC_GETH_UCCE_CBPR 0x10000000 #define UCC_GETH_UCCE_BSY 0x08000000 #define UCC_GETH_UCCE_RXC 0x04000000 #define UCC_GETH_UCCE_TXC 0x02000000 #define UCC_GETH_UCCE_TXE 0x01000000 #define UCC_GETH_UCCE_TXB7 0x00800000 #define UCC_GETH_UCCE_TXB6 0x00400000 #define UCC_GETH_UCCE_TXB5 0x00200000 #define UCC_GETH_UCCE_TXB4 0x00100000 #define UCC_GETH_UCCE_TXB3 0x00080000 #define UCC_GETH_UCCE_TXB2 0x00040000 #define UCC_GETH_UCCE_TXB1 0x00020000 #define UCC_GETH_UCCE_TXB0 0x00010000 #define UCC_GETH_UCCE_RXB7 0x00008000 #define UCC_GETH_UCCE_RXB6 0x00004000 #define UCC_GETH_UCCE_RXB5 0x00002000 #define UCC_GETH_UCCE_RXB4 0x00001000 #define UCC_GETH_UCCE_RXB3 0x00000800 #define UCC_GETH_UCCE_RXB2 0x00000400 #define UCC_GETH_UCCE_RXB1 0x00000200 #define UCC_GETH_UCCE_RXB0 0x00000100 #define UCC_GETH_UCCE_RXF7 0x00000080 #define UCC_GETH_UCCE_RXF6 0x00000040 #define UCC_GETH_UCCE_RXF5 0x00000020 #define UCC_GETH_UCCE_RXF4 0x00000010 #define UCC_GETH_UCCE_RXF3 0x00000008 #define UCC_GETH_UCCE_RXF2 0x00000004 #define UCC_GETH_UCCE_RXF1 0x00000002 #define UCC_GETH_UCCE_RXF0 0x00000001 /* UPSMR, when used as a UART */ #define UCC_UART_UPSMR_FLC 0x8000 #define UCC_UART_UPSMR_SL 0x4000 #define UCC_UART_UPSMR_CL_MASK 0x3000 #define UCC_UART_UPSMR_CL_8 0x3000 #define UCC_UART_UPSMR_CL_7 0x2000 #define UCC_UART_UPSMR_CL_6 0x1000 #define UCC_UART_UPSMR_CL_5 0x0000 #define UCC_UART_UPSMR_UM_MASK 0x0c00 #define UCC_UART_UPSMR_UM_NORMAL 0x0000 #define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400 #define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00 #define UCC_UART_UPSMR_FRZ 0x0200 #define UCC_UART_UPSMR_RZS 0x0100 #define UCC_UART_UPSMR_SYN 0x0080 #define UCC_UART_UPSMR_DRT 0x0040 #define UCC_UART_UPSMR_PEN 0x0010 #define UCC_UART_UPSMR_RPM_MASK 0x000c #define UCC_UART_UPSMR_RPM_ODD 0x0000 #define UCC_UART_UPSMR_RPM_LOW 0x0004 #define UCC_UART_UPSMR_RPM_EVEN 0x0008 #define UCC_UART_UPSMR_RPM_HIGH 0x000C #define UCC_UART_UPSMR_TPM_MASK 0x0003 #define UCC_UART_UPSMR_TPM_ODD 0x0000 #define UCC_UART_UPSMR_TPM_LOW 0x0001 #define UCC_UART_UPSMR_TPM_EVEN 0x0002 #define UCC_UART_UPSMR_TPM_HIGH 0x0003 /* UCC Transmit On Demand Register (UTODR) */ #define UCC_SLOW_TOD 0x8000 #define UCC_FAST_TOD 0x8000 /* UCC Bus Mode Register masks */ /* Not to be confused with the Bundle Mode Register */ #define UCC_BMR_GBL 0x20 #define UCC_BMR_BO_BE 0x10 #define UCC_BMR_CETM 0x04 #define UCC_BMR_DTB 0x02 #define UCC_BMR_BDB 0x01 /* Function code masks */ #define FC_GBL 0x20 #define FC_DTB_LCL 0x02 #define UCC_FAST_FUNCTION_CODE_GBL 0x20 #define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02 #define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01 #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_QE_H */