/* * Broadcom Starfighter 2 switch register defines * * Copyright (C) 2014, Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #ifndef __BCM_SF2_REGS_H #define __BCM_SF2_REGS_H /* Register set relative to 'REG' */ enum bcm_sf2_reg_offs { REG_SWITCH_CNTRL = 0, REG_SWITCH_STATUS, REG_DIR_DATA_WRITE, REG_DIR_DATA_READ, REG_SWITCH_REVISION, REG_PHY_REVISION, REG_SPHY_CNTRL, REG_RGMII_0_CNTRL, REG_RGMII_1_CNTRL, REG_RGMII_2_CNTRL, REG_LED_0_CNTRL, REG_LED_1_CNTRL, REG_LED_2_CNTRL, REG_SWITCH_REG_MAX, }; /* Relative to REG_SWITCH_CNTRL */ #define MDIO_MASTER_SEL (1 << 0) /* Relative to REG_SWITCH_REVISION */ #define SF2_REV_MASK 0xffff #define SWITCH_TOP_REV_SHIFT 16 #define SWITCH_TOP_REV_MASK 0xffff /* Relative to REG_PHY_REVISION */ #define PHY_REVISION_MASK 0xffff /* Relative to REG_SPHY_CNTRL */ #define IDDQ_BIAS (1 << 0) #define EXT_PWR_DOWN (1 << 1) #define FORCE_DLL_EN (1 << 2) #define IDDQ_GLOBAL_PWR (1 << 3) #define CK25_DIS (1 << 4) #define PHY_RESET (1 << 5) #define PHY_PHYAD_SHIFT 8 #define PHY_PHYAD_MASK 0x1F #define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_CNTRL + (x)) /* Relative to REG_RGMII_CNTRL */ #define RGMII_MODE_EN (1 << 0) #define ID_MODE_DIS (1 << 1) #define PORT_MODE_SHIFT 2 #define INT_EPHY (0 << PORT_MODE_SHIFT) #define INT_GPHY (1 << PORT_MODE_SHIFT) #define EXT_EPHY (2 << PORT_MODE_SHIFT) #define EXT_GPHY (3 << PORT_MODE_SHIFT) #define EXT_REVMII (4 << PORT_MODE_SHIFT) #define PORT_MODE_MASK 0x7 #define RVMII_REF_SEL (1 << 5) #define RX_PAUSE_EN (1 << 6) #define TX_PAUSE_EN (1 << 7) #define TX_CLK_STOP_EN (1 << 8) #define LPI_COUNT_SHIFT 9 #define LPI_COUNT_MASK 0x3F #define REG_LED_CNTRL(x) (REG_LED_0_CNTRL + (x)) #define SPDLNK_SRC_SEL (1 << 24) /* Register set relative to 'INTRL2_0' and 'INTRL2_1' */ #define INTRL2_CPU_STATUS 0x00 #define INTRL2_CPU_SET 0x04 #define INTRL2_CPU_CLEAR 0x08 #define INTRL2_CPU_MASK_STATUS 0x0c #define INTRL2_CPU_MASK_SET 0x10 #define INTRL2_CPU_MASK_CLEAR 0x14 /* Shared INTRL2_0 and INTRL2_ interrupt sources macros */ #define P_LINK_UP_IRQ(x) (1 << (0 + (x))) #define P_LINK_DOWN_IRQ(x) (1 << (1 + (x))) #define P_ENERGY_ON_IRQ(x) (1 << (2 + (x))) #define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x))) #define P_GPHY_IRQ(x) (1 << (4 + (x))) #define P_NUM_IRQ 5 #define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \ P_LINK_DOWN_IRQ((x)) | \ P_ENERGY_ON_IRQ((x)) | \ P_ENERGY_OFF_IRQ((x)) | \ P_GPHY_IRQ((x))) /* INTRL2_0 interrupt sources */ #define P0_IRQ_OFF 0 #define MEM_DOUBLE_IRQ (1 << 5) #define EEE_LPI_IRQ (1 << 6) #define P5_CPU_WAKE_IRQ (1 << 7) #define P8_CPU_WAKE_IRQ (1 << 8) #define P7_CPU_WAKE_IRQ (1 << 9) #define IEEE1588_IRQ (1 << 10) #define MDIO_ERR_IRQ (1 << 11) #define MDIO_DONE_IRQ (1 << 12) #define GISB_ERR_IRQ (1 << 13) #define UBUS_ERR_IRQ (1 << 14) #define FAILOVER_ON_IRQ (1 << 15) #define FAILOVER_OFF_IRQ (1 << 16) #define TCAM_SOFT_ERR_IRQ (1 << 17) /* INTRL2_1 interrupt sources */ #define P7_IRQ_OFF 0 #define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ) /* Register set relative to 'CORE' */ #define CORE_G_PCTL_PORT0 0x00000 #define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4)) #define CORE_IMP_CTL 0x00020 #define RX_DIS (1 << 0) #define TX_DIS (1 << 1) #define RX_BCST_EN (1 << 2) #define RX_MCST_EN (1 << 3) #define RX_UCST_EN (1 << 4) #define CORE_SWMODE 0x0002c #define SW_FWDG_MODE (1 << 0) #define SW_FWDG_EN (1 << 1) #define RTRY_LMT_DIS (1 << 2) #define CORE_STS_OVERRIDE_IMP 0x00038 #define GMII_SPEED_UP_2G (1 << 6) #define MII_SW_OR (1 << 7) #define CORE_NEW_CTRL 0x00084 #define IP_MC (1 << 0) #define OUTRANGEERR_DISCARD (1 << 1) #define INRANGEERR_DISCARD (1 << 2) #define CABLE_DIAG_LEN (1 << 3) #define OVERRIDE_AUTO_PD_WAR (1 << 4) #define EN_AUTO_PD_WAR (1 << 5) #define UC_FWD_EN (1 << 6) #define MC_FWD_EN (1 << 7) #define CORE_SWITCH_CTRL 0x00088 #define MII_DUMB_FWDG_EN (1 << 6) #define CORE_SFT_LRN_CTRL 0x000f8 #define SW_LEARN_CNTL(x) (1 << (x)) #define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4) #define LINK_STS (1 << 0) #define DUPLX_MODE (1 << 1) #define SPEED_SHIFT 2 #define SPEED_MASK 0x3 #define RXFLOW_CNTL (1 << 4) #define TXFLOW_CNTL (1 << 5) #define SW_OVERRIDE (1 << 6) #define CORE_WATCHDOG_CTRL 0x001e4 #define SOFTWARE_RESET (1 << 7) #define EN_CHIP_RST (1 << 6) #define EN_SW_RESET (1 << 4) #define CORE_FAST_AGE_CTRL 0x00220 #define EN_FAST_AGE_STATIC (1 << 0) #define EN_AGE_DYNAMIC (1 << 1) #define EN_AGE_PORT (1 << 2) #define EN_AGE_VLAN (1 << 3) #define EN_AGE_SPT (1 << 4) #define EN_AGE_MCAST (1 << 5) #define FAST_AGE_STR_DONE (1 << 7) #define CORE_FAST_AGE_PORT 0x00224 #define AGE_PORT_MASK 0xf #define CORE_FAST_AGE_VID 0x00228 #define AGE_VID_MASK 0x3fff #define CORE_LNKSTS 0x00400 #define LNK_STS_MASK 0x1ff #define CORE_SPDSTS 0x00410 #define SPDSTS_10 0 #define SPDSTS_100 1 #define SPDSTS_1000 2 #define SPDSTS_SHIFT 2 #define SPDSTS_MASK 0x3 #define CORE_DUPSTS 0x00420 #define CORE_DUPSTS_MASK 0x1ff #define CORE_PAUSESTS 0x00428 #define PAUSESTS_TX_PAUSE_SHIFT 9 #define CORE_GMNCFGCFG 0x0800 #define RST_MIB_CNT (1 << 0) #define RXBPDU_EN (1 << 1) #define CORE_IMP0_PRT_ID 0x0804 #define CORE_BRCM_HDR_CTRL 0x0080c #define BRCM_HDR_EN_P8 (1 << 0) #define BRCM_HDR_EN_P5 (1 << 1) #define BRCM_HDR_EN_P7 (1 << 2) #define CORE_RST_MIB_CNT_EN 0x0950 #define CORE_BRCM_HDR_RX_DIS 0x0980 #define CORE_BRCM_HDR_TX_DIS 0x0988 #define CORE_ARLA_VTBL_RWCTRL 0x1600 #define ARLA_VTBL_CMD_WRITE 0 #define ARLA_VTBL_CMD_READ 1 #define ARLA_VTBL_CMD_CLEAR 2 #define ARLA_VTBL_STDN (1 << 7) #define CORE_ARLA_VTBL_ADDR 0x1604 #define VTBL_ADDR_INDEX_MASK 0xfff #define CORE_ARLA_VTBL_ENTRY 0x160c #define FWD_MAP_MASK 0x1ff #define UNTAG_MAP_MASK 0x1ff #define UNTAG_MAP_SHIFT 9 #define MSTP_INDEX_MASK 0x7 #define MSTP_INDEX_SHIFT 18 #define FWD_MODE (1 << 21) #define CORE_MEM_PSM_VDD_CTRL 0x2380 #define P_TXQ_PSM_VDD_SHIFT 2 #define P_TXQ_PSM_VDD_MASK 0x3 #define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \ ((x) * P_TXQ_PSM_VDD_SHIFT)) #define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8)) #define PORT_VLAN_CTRL_MASK 0x1ff #define CORE_DEFAULT_1Q_TAG_P(x) (0xd040 + ((x) * 8)) #define CFI_SHIFT 12 #define PRI_SHIFT 13 #define PRI_MASK 0x7 #define CORE_JOIN_ALL_VLAN_EN 0xd140 #define CORE_EEE_EN_CTRL 0x24800 #define CORE_EEE_LPI_INDICATE 0x24810 #endif /* __BCM_SF2_REGS_H */