# # X86 Platform Specific Drivers # menuconfig X86_PLATFORM_DEVICES bool "X86 Platform Specific Device Drivers" default y ---help--- Say Y here to get to see options for device drivers for various x86 platforms, including vendor-specific laptop extension drivers. This option alone does not add any kernel code. If you say N, all options in this submenu will be skipped and disabled. if X86_PLATFORM_DEVICES config ACER_WMI tristate "Acer WMI Laptop Extras" depends on ACPI depends on LEDS_CLASS depends on NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE depends on SERIO_I8042 depends on RFKILL || RFKILL = n select ACPI_WMI ---help--- This is a driver for newer Acer (and Wistron) laptops. It adds wireless radio and bluetooth control, and on some laptops, exposes the mail LED and LCD backlight. For more information about this driver see If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M here. config ACERHDF tristate "Acer Aspire One temperature and fan driver" depends on THERMAL && THERMAL_HWMON && ACPI ---help--- This is a driver for Acer Aspire One netbooks. It allows to access the temperature sensor and to control the fan. After loading this driver the BIOS is still in control of the fan. To let the kernel handle the fan, do: echo -n enabled > /sys/class/thermal/thermal_zone0/mode For more information about this driver see If you have an Acer Aspire One netbook, say Y or M here. config ASUS_LAPTOP tristate "Asus Laptop Extras" depends on ACPI depends on !ACPI_ASUS select LEDS_CLASS select NEW_LEDS select BACKLIGHT_CLASS_DEVICE depends on INPUT depends on RFKILL || RFKILL = n select INPUT_SPARSEKMAP ---help--- This is the new Linux driver for Asus laptops. It may also support some MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate standard ACPI events and input events. It also adds support for video output switching, LCD backlight control, Bluetooth and Wlan control, and most importantly, allows you to blink those fancy LEDs. For more information and a userspace daemon for handling the extra buttons see . If you have an ACPI-compatible ASUS laptop, say Y or M here. config DELL_LAPTOP tristate "Dell Laptop Extras (EXPERIMENTAL)" depends on X86 depends on DCDBAS depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL || RFKILL = n depends on POWER_SUPPLY depends on SERIO_I8042 default n ---help--- This driver adds support for rfkill and backlight control to Dell laptops. config DELL_WMI tristate "Dell WMI extras" depends on ACPI_WMI depends on INPUT ---help--- Say Y here if you want to support WMI-based hotkeys on Dell laptops. To compile this driver as a module, choose M here: the module will be called dell-wmi. config FUJITSU_LAPTOP tristate "Fujitsu Laptop Extras" depends on ACPI depends on INPUT depends on BACKLIGHT_CLASS_DEVICE depends on LEDS_CLASS || LEDS_CLASS=n ---help--- This is a driver for laptops built by Fujitsu: * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks * Possibly other Fujitsu laptop models * Tested with S6410 and S7020 It adds support for LCD brightness control and some hotkeys. If you have a Fujitsu laptop, say Y or M here. config FUJITSU_LAPTOP_DEBUG bool "Verbose debug mode for Fujitsu Laptop Extras" depends on FUJITSU_LAPTOP default n ---help--- Enables extra debug output from the fujitsu extras driver, at the expense of a slight increase in driver size. If you are not sure, say N here. config TC1100_WMI tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)" depends on !X86_64 depends on EXPERIMENTAL depends on ACPI select ACPI_WMI ---help--- This is a driver for the WMI extensions (wireless and bluetooth power control) of the HP Compaq TC1100 tablet. config HP_WMI tristate "HP WMI extras" depends on ACPI_WMI depends on INPUT depends on RFKILL || RFKILL = n help Say Y here if you want to support WMI-based hotkeys on HP laptops and to read data from WMI such as docking or ambient light sensor state. To compile this driver as a module, choose M here: the module will be called hp-wmi. config MSI_LAPTOP tristate "MSI Laptop Extras" depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by MSI (MICRO-STAR INTERNATIONAL): MSI MegaBook S270 (MS-1013) Cytron/TCM/Medion/Tchibo MD96100/SAM2000 It adds support for Bluetooth, WLAN and LCD brightness control. More information about this driver is available at . If you have an MSI S270 laptop, say Y or M here. config PANASONIC_LAPTOP tristate "Panasonic Laptop Extras" depends on INPUT && ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This driver adds support for access to backlight control and hotkeys on Panasonic Let's Note laptops. If you have a Panasonic Let's note laptop (such as the R1(N variant), R2, R3, R5, T2, W2 and Y2 series), say Y. config COMPAL_LAPTOP tristate "Compal Laptop Extras" depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by Compal: Compal FL90/IFL90 Compal FL91/IFL91 Compal FL92/JFL92 Compal FT00/IFT00 It adds support for Bluetooth, WLAN and LCD brightness control. If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here. config SONY_LAPTOP tristate "Sony Laptop Extras" depends on ACPI select BACKLIGHT_CLASS_DEVICE depends on INPUT depends on RFKILL ---help--- This mini-driver drives the SNC and SPIC devices present in the ACPI BIOS of the Sony Vaio laptops. It gives access to some extra laptop functionalities like Bluetooth, screen brightness control, Fn keys and allows powering on/off some devices. Read for more information. config SONYPI_COMPAT bool "Sonypi compatibility" depends on SONY_LAPTOP ---help--- Build the sonypi driver compatibility code into the sony-laptop driver. config THINKPAD_ACPI tristate "ThinkPad ACPI Laptop Extras" depends on ACPI depends on INPUT depends on RFKILL || RFKILL = n select BACKLIGHT_LCD_SUPPORT select BACKLIGHT_CLASS_DEVICE select HWMON select NVRAM select NEW_LEDS select LEDS_CLASS ---help--- This is a driver for the IBM and Lenovo ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth control, video output switching, ThinkLight control, UltraBay eject and more. For more information about this driver see and . This driver was formerly known as ibm-acpi. Extra functionality will be available if the rfkill (CONFIG_RFKILL) and/or ALSA (CONFIG_SND) subsystems are available in the kernel. Note that if you want ThinkPad-ACPI to be built-in instead of modular, ALSA and rfkill will also have to be built-in. If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. config THINKPAD_ACPI_ALSA_SUPPORT bool "Console audio control ALSA interface" depends on THINKPAD_ACPI depends on SND depends on SND = y || THINKPAD_ACPI = SND default y ---help--- Enables monitoring of the built-in console audio output control (headphone and speakers), which is operated by the mute and (in some ThinkPad models) volume hotkeys. If this option is enabled, ThinkPad-ACPI will export an ALSA card with a single read-only mixer control, which should be used for on-screen-display feedback purposes by the Desktop Environment. Optionally, the driver will also allow software control (the ALSA mixer will be made read-write). Please refer to the driver documentation for details. All IBM models have both volume and mute control. Newer Lenovo models only have mute control (the volume hotkeys are just normal keys and volume control is done through the main HDA mixer). config THINKPAD_ACPI_DEBUGFACILITIES bool "Maintainer debug facilities" depends on THINKPAD_ACPI default n ---help--- Enables extra stuff in the thinkpad-acpi which is completely useless for normal use. Read the driver source to find out what it does. Say N here, unless you were told by a kernel maintainer to do otherwise. config THINKPAD_ACPI_DEBUG bool "Verbose debug mode" depends on THINKPAD_ACPI default n ---help--- Enables extra debugging information, at the expense of a slightly increase in driver size. If you are not sure, say N here. config THINKPAD_ACPI_UNSAFE_LEDS bool "Allow control of important LEDs (unsafe)" depends on THINKPAD_ACPI default n ---help--- Overriding LED state on ThinkPads can mask important firmware alerts (like critical battery condition), or misled the user into damaging the hardware (undocking or ejecting the bay while buses are still active), etc. LED control on the ThinkPad is write-only (with very few exceptions on very ancient models), which makes it impossible to know beforehand if important information will be lost when one changes LED state. Users that know what they are doing can enable this option and the driver will allow control of every LED, including the ones on the dock stations. Never enable this option on a distribution kernel. Say N here, unless you are building a kernel for your own use, and need to control the important firmware LEDs. config THINKPAD_ACPI_VIDEO bool "Video output control support" depends on THINKPAD_ACPI default y ---help--- Allows the thinkpad_acpi driver to provide an interface to control the various video output ports. This feature often won't work well, depending on ThinkPad model, display state, video output devices in use, whether there is a X server running, phase of the moon, and the current mood of Schroedinger's cat. If you can use X.org's RandR to control your ThinkPad's video output ports instead of this feature, don't think twice: do it and say N here to save memory and avoid bad interactions with X.org. NOTE: access to this feature is limited to processes with the CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms where it interacts badly with X.org. If you are not sure, say Y here but do try to check if you could be using X.org RandR instead. config THINKPAD_ACPI_HOTKEY_POLL bool "Support NVRAM polling for hot keys" depends on THINKPAD_ACPI default y ---help--- Some thinkpad models benefit from NVRAM polling to detect a few of the hot key press events. If you know your ThinkPad model does not need to do NVRAM polling to support any of the hot keys you use, unselecting this option will save about 1kB of memory. ThinkPads T40 and newer, R52 and newer, and X31 and newer are unlikely to need NVRAM polling in their latest BIOS versions. NVRAM polling can detect at most the following keys: ThinkPad/Access IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute, Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12). If you are not sure, say Y here. The driver enables polling only if it is strictly necessary to do so. config INTEL_MENLOW tristate "Thermal Management driver for Intel menlow platform" depends on ACPI_THERMAL select THERMAL ---help--- ACPI thermal management enhancement driver on Intel Menlow platform. If unsure, say N. config EEEPC_LAPTOP tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" depends on ACPI depends on INPUT depends on EXPERIMENTAL depends on RFKILL || RFKILL = n depends on HOTPLUG_PCI select BACKLIGHT_CLASS_DEVICE select HWMON select LEDS_CLASS select NEW_LEDS select INPUT_SPARSEKMAP ---help--- This driver supports the Fn-Fx keys on Eee PC laptops. It also gives access to some extra laptop functionalities like Bluetooth, backlight and allows powering on/off some other devices. If you have an Eee PC laptop, say Y or M here. config ACPI_WMI tristate "WMI" depends on ACPI help This driver adds support for the ACPI-WMI (Windows Management Instrumentation) mapper device (PNP0C14) found on some systems. ACPI-WMI is a proprietary extension to ACPI to expose parts of the ACPI firmware to userspace - this is done through various vendor defined methods and data blocks in a PNP0C14 device, which are then made available for userspace to call. The implementation of this in Linux currently only exposes this to other kernel space drivers. This driver is a required dependency to build the firmware specific drivers needed on many machines, including Acer and HP laptops. It is safe to enable this driver even if your DSDT doesn't define any ACPI-WMI devices. config MSI_WMI tristate "MSI WMI extras" depends on ACPI_WMI depends on INPUT depends on BACKLIGHT_CLASS_DEVICE select INPUT_SPARSEKMAP help Say Y here if you want to support WMI-based hotkeys on MSI laptops. To compile this driver as a module, choose M here: the module will be called msi-wmi. config ACPI_ASUS tristate "ASUS/Medion Laptop Extras (DEPRECATED)" depends on ACPI select BACKLIGHT_CLASS_DEVICE ---help--- This driver provides support for extra features of ACPI-compatible ASUS laptops. As some of Medion laptops are made by ASUS, it may also support some Medion laptops (such as 9675 for example). It makes all the extra buttons generate standard ACPI events that go through /proc/acpi/events, and (on some models) adds support for changing the display brightness and output, switching the LCD backlight on and off, and most importantly, allows you to blink those fancy LEDs intended for reporting mail and wireless status. Note: display switching code is currently considered EXPERIMENTAL, toying with these values may even lock your machine. All settings are changed via /proc/acpi/asus directory entries. Owner and group for these entries can be set with asus_uid and asus_gid parameters. More information and a userspace daemon for handling the extra buttons at . If you have an ACPI-compatible ASUS laptop, say Y or M here. This driver is still under development, so if your laptop is unsupported or something works not quite as expected, please use the mailing list available on the above page (acpi4asus-user@lists.sourceforge.net). NOTE: This driver is deprecated and will probably be removed soon, use asus-laptop instead. config TOPSTAR_LAPTOP tristate "Topstar Laptop Extras" depends on ACPI depends on INPUT ---help--- This driver adds support for hotkeys found on Topstar laptops. If you have a Topstar laptop, say Y or M here. config ACPI_TOSHIBA tristate "Toshiba Laptop Extras" depends on ACPI depends on INPUT depends on RFKILL || RFKILL = n select INPUT_POLLDEV select BACKLIGHT_CLASS_DEVICE ---help--- This driver adds support for access to certain system settings on "legacy free" Toshiba laptops. These laptops can be recognized by their lack of a BIOS setup menu and APM support. On these machines, all system configuration is handled through the ACPI. This driver is required for access to controls not covered by the general ACPI drivers, such as LCD brightness, video output, etc. This driver differs from the non-ACPI Toshiba laptop driver (located under "Processor type and features") in several aspects. Configuration is accessed by reading and writing text files in the /proc tree instead of by program interface to /dev. Furthermore, no power management functions are exposed, as those are handled by the general ACPI drivers. More information about this driver is available at . If you have a legacy free Toshiba laptop (such as the Libretto L1 series), say Y. config TOSHIBA_BT_RFKILL tristate "Toshiba Bluetooth RFKill switch support" depends on ACPI ---help--- This driver adds support for Bluetooth events for the RFKill switch on modern Toshiba laptops with full ACPI support and an RFKill switch. This driver handles RFKill events for the TOS6205 Bluetooth, and re-enables it when the switch is set back to the 'on' position. If you have a modern Toshiba laptop with a Bluetooth and an RFKill switch (such as the Portege R500), say Y. config ACPI_CMPC tristate "CMPC Laptop Extras" depends on X86 && ACPI select INPUT select BACKLIGHT_CLASS_DEVICE default n help Support for Intel Classmate PC ACPI devices, including some keys as input device, backlight device, tablet and accelerometer devices. endif # X86_PLATFORM_DEVICES