/* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Sascha Hauer, kernel@pengutronix.de * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define DRIVER_NAME "mxc_nand" #define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35()) #define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27()) /* Addresses for NFC registers */ #define NFC_BUF_SIZE 0xE00 #define NFC_BUF_ADDR 0xE04 #define NFC_FLASH_ADDR 0xE06 #define NFC_FLASH_CMD 0xE08 #define NFC_CONFIG 0xE0A #define NFC_ECC_STATUS_RESULT 0xE0C #define NFC_RSLTMAIN_AREA 0xE0E #define NFC_RSLTSPARE_AREA 0xE10 #define NFC_WRPROT 0xE12 #define NFC_V1_UNLOCKSTART_BLKADDR 0xe14 #define NFC_V1_UNLOCKEND_BLKADDR 0xe16 #define NFC_V21_UNLOCKSTART_BLKADDR 0xe20 #define NFC_V21_UNLOCKEND_BLKADDR 0xe22 #define NFC_NF_WRPRST 0xE18 #define NFC_CONFIG1 0xE1A #define NFC_CONFIG2 0xE1C /* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register * for Command operation */ #define NFC_CMD 0x1 /* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register * for Address operation */ #define NFC_ADDR 0x2 /* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register * for Input operation */ #define NFC_INPUT 0x4 /* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register * for Data Output operation */ #define NFC_OUTPUT 0x8 /* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register * for Read ID operation */ #define NFC_ID 0x10 /* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register * for Read Status operation */ #define NFC_STATUS 0x20 /* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read * Status operation */ #define NFC_INT 0x8000 #define NFC_SP_EN (1 << 2) #define NFC_ECC_EN (1 << 3) #define NFC_INT_MSK (1 << 4) #define NFC_BIG (1 << 5) #define NFC_RST (1 << 6) #define NFC_CE (1 << 7) #define NFC_ONE_CYCLE (1 << 8) struct mxc_nand_host { struct mtd_info mtd; struct nand_chip nand; struct mtd_partition *parts; struct device *dev; void *spare0; void *main_area0; void *main_area1; void __iomem *base; void __iomem *regs; int status_request; struct clk *clk; int clk_act; int irq; wait_queue_head_t irq_waitq; uint8_t *data_buf; unsigned int buf_start; int spare_len; }; /* OOB placement block for use with hardware ecc generation */ static struct nand_ecclayout nandv1_hw_eccoob_smallpage = { .eccbytes = 5, .eccpos = {6, 7, 8, 9, 10}, .oobfree = {{0, 5}, {12, 4}, } }; static struct nand_ecclayout nandv1_hw_eccoob_largepage = { .eccbytes = 20, .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26, 38, 39, 40, 41, 42, 54, 55, 56, 57, 58}, .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, } }; /* OOB description for 512 byte pages with 16 byte OOB */ static struct nand_ecclayout nandv2_hw_eccoob_smallpage = { .eccbytes = 1 * 9, .eccpos = { 7, 8, 9, 10, 11, 12, 13, 14, 15 }, .oobfree = { {.offset = 0, .length = 5} } }; /* OOB description for 2048 byte pages with 64 byte OOB */ static struct nand_ecclayout nandv2_hw_eccoob_largepage = { .eccbytes = 4 * 9, .eccpos = { 7, 8, 9, 10, 11, 12, 13, 14, 15, 23, 24, 25, 26, 27, 28, 29, 30, 31, 39, 40, 41, 42, 43, 44, 45, 46, 47, 55, 56, 57, 58, 59, 60, 61, 62, 63 }, .oobfree = { {.offset = 2, .length = 4}, {.offset = 16, .length = 7}, {.offset = 32, .length = 7}, {.offset = 48, .length = 7} } }; #ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL }; #endif static irqreturn_t mxc_nfc_irq(int irq, void *dev_id) { struct mxc_nand_host *host = dev_id; uint16_t tmp; tmp = readw(host->regs + NFC_CONFIG1); tmp |= NFC_INT_MSK; /* Disable interrupt */ writew(tmp, host->regs + NFC_CONFIG1); wake_up(&host->irq_waitq); return IRQ_HANDLED; } /* This function polls the NANDFC to wait for the basic operation to * complete by checking the INT bit of config2 register. */ static void wait_op_done(struct mxc_nand_host *host, int useirq) { uint32_t tmp; int max_retries = 2000; if (useirq) { if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) { tmp = readw(host->regs + NFC_CONFIG1); tmp &= ~NFC_INT_MSK; /* Enable interrupt */ writew(tmp, host->regs + NFC_CONFIG1); wait_event(host->irq_waitq, readw(host->regs + NFC_CONFIG2) & NFC_INT); tmp = readw(host->regs + NFC_CONFIG2); tmp &= ~NFC_INT; writew(tmp, host->regs + NFC_CONFIG2); } } else { while (max_retries-- > 0) { if (readw(host->regs + NFC_CONFIG2) & NFC_INT) { tmp = readw(host->regs + NFC_CONFIG2); tmp &= ~NFC_INT; writew(tmp, host->regs + NFC_CONFIG2); break; } udelay(1); } if (max_retries < 0) DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n", __func__); } } /* This function issues the specified command to the NAND device and * waits for completion. */ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq) { DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq); writew(cmd, host->regs + NFC_FLASH_CMD); writew(NFC_CMD, host->regs + NFC_CONFIG2); /* Wait for operation to complete */ wait_op_done(host, useirq); } /* This function sends an address (or partial address) to the * NAND device. The address is used to select the source/destination for * a NAND command. */ static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast) { DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast); writew(addr, host->regs + NFC_FLASH_ADDR); writew(NFC_ADDR, host->regs + NFC_CONFIG2); /* Wait for operation to complete */ wait_op_done(host, islast); } static void send_page(struct mtd_info *mtd, unsigned int ops) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; int bufs, i; if (nfc_is_v1() && mtd->writesize > 512) bufs = 4; else bufs = 1; for (i = 0; i < bufs; i++) { /* NANDFC buffer 0 is used for page read/write */ writew(i, host->regs + NFC_BUF_ADDR); writew(ops, host->regs + NFC_CONFIG2); /* Wait for operation to complete */ wait_op_done(host, true); } } /* Request the NANDFC to perform a read of the NAND device ID. */ static void send_read_id(struct mxc_nand_host *host) { struct nand_chip *this = &host->nand; /* NANDFC buffer 0 is used for device ID output */ writew(0x0, host->regs + NFC_BUF_ADDR); writew(NFC_ID, host->regs + NFC_CONFIG2); /* Wait for operation to complete */ wait_op_done(host, true); if (this->options & NAND_BUSWIDTH_16) { void __iomem *main_buf = host->main_area0; /* compress the ID info */ writeb(readb(main_buf + 2), main_buf + 1); writeb(readb(main_buf + 4), main_buf + 2); writeb(readb(main_buf + 6), main_buf + 3); writeb(readb(main_buf + 8), main_buf + 4); writeb(readb(main_buf + 10), main_buf + 5); } memcpy(host->data_buf, host->main_area0, 16); } /* This function requests the NANDFC to perform a read of the * NAND device status and returns the current status. */ static uint16_t get_dev_status(struct mxc_nand_host *host) { void __iomem *main_buf = host->main_area1; uint32_t store; uint16_t ret; /* Issue status request to NAND device */ /* store the main area1 first word, later do recovery */ store = readl(main_buf); /* NANDFC buffer 1 is used for device status to prevent * corruption of read/write buffer on status requests. */ writew(1, host->regs + NFC_BUF_ADDR); writew(NFC_STATUS, host->regs + NFC_CONFIG2); /* Wait for operation to complete */ wait_op_done(host, true); /* Status is placed in first word of main buffer */ /* get status, then recovery area 1 data */ ret = readw(main_buf); writel(store, main_buf); return ret; } /* This functions is used by upper layer to checks if device is ready */ static int mxc_nand_dev_ready(struct mtd_info *mtd) { /* * NFC handles R/B internally. Therefore, this function * always returns status as ready. */ return 1; } static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode) { /* * If HW ECC is enabled, we turn it on during init. There is * no need to enable again here. */ } static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; /* * 1-Bit errors are automatically corrected in HW. No need for * additional correction. 2-Bit errors cannot be corrected by * HW ECC, so we need to return failure */ uint16_t ecc_status = readw(host->regs + NFC_ECC_STATUS_RESULT); if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { DEBUG(MTD_DEBUG_LEVEL0, "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n"); return -1; } return 0; } static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { return 0; } static u_char mxc_nand_read_byte(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; uint8_t ret; /* Check for status request */ if (host->status_request) return get_dev_status(host) & 0xFF; ret = *(uint8_t *)(host->data_buf + host->buf_start); host->buf_start++; return ret; } static uint16_t mxc_nand_read_word(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; uint16_t ret; ret = *(uint16_t *)(host->data_buf + host->buf_start); host->buf_start += 2; return ret; } /* Write data of length len to buffer buf. The data to be * written on NAND Flash is first copied to RAMbuffer. After the Data Input * Operation by the NFC, the data is written to NAND Flash */ static void mxc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; u16 col = host->buf_start; int n = mtd->oobsize + mtd->writesize - col; n = min(n, len); memcpy(host->data_buf + col, buf, n); host->buf_start += n; } /* Read the data buffer from the NAND Flash. To read the data from NAND * Flash first the data output cycle is initiated by the NFC, which copies * the data to RAMbuffer. This data of length len is then copied to buffer buf. */ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; u16 col = host->buf_start; int n = mtd->oobsize + mtd->writesize - col; n = min(n, len); memcpy(buf, host->data_buf + col, len); host->buf_start += len; } /* Used by the upper layer to verify the data in NAND Flash * with the data in the buf. */ static int mxc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) { return -EFAULT; } /* This function is used by upper layer for select and * deselect of the NAND chip */ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; switch (chip) { case -1: /* Disable the NFC clock */ if (host->clk_act) { clk_disable(host->clk); host->clk_act = 0; } break; case 0: /* Enable the NFC clock */ if (!host->clk_act) { clk_enable(host->clk); host->clk_act = 1; } break; default: break; } } /* * Function to transfer data to/from spare area. */ static void copy_spare(struct mtd_info *mtd, bool bfrom) { struct nand_chip *this = mtd->priv; struct mxc_nand_host *host = this->priv; u16 i, j; u16 n = mtd->writesize >> 9; u8 *d = host->data_buf + mtd->writesize; u8 *s = host->spare0; u16 t = host->spare_len; j = (mtd->oobsize / n >> 1) << 1; if (bfrom) { for (i = 0; i < n - 1; i++) memcpy(d + i * j, s + i * t, j); /* the last section */ memcpy(d + i * j, s + i * t, mtd->oobsize - i * j); } else { for (i = 0; i < n - 1; i++) memcpy(&s[i * t], &d[i * j], j); /* the last section */ memcpy(&s[i * t], &d[i * j], mtd->oobsize - i * j); } } static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; /* Write out column address, if necessary */ if (column != -1) { /* * MXC NANDFC can only perform full page+spare or * spare-only read/write. When the upper layers * layers perform a read/write buf operation, * we will used the saved column adress to index into * the full page. */ send_addr(host, 0, page_addr == -1); if (mtd->writesize > 512) /* another col addr cycle for 2k page */ send_addr(host, 0, false); } /* Write out page address, if necessary */ if (page_addr != -1) { /* paddr_0 - p_addr_7 */ send_addr(host, (page_addr & 0xff), false); if (mtd->writesize > 512) { if (mtd->size >= 0x10000000) { /* paddr_8 - paddr_15 */ send_addr(host, (page_addr >> 8) & 0xff, false); send_addr(host, (page_addr >> 16) & 0xff, true); } else /* paddr_8 - paddr_15 */ send_addr(host, (page_addr >> 8) & 0xff, true); } else { /* One more address cycle for higher density devices */ if (mtd->size >= 0x4000000) { /* paddr_8 - paddr_15 */ send_addr(host, (page_addr >> 8) & 0xff, false); send_addr(host, (page_addr >> 16) & 0xff, true); } else /* paddr_8 - paddr_15 */ send_addr(host, (page_addr >> 8) & 0xff, true); } } } /* Used by the upper layer to write command to NAND Flash for * different operations to be carried out on NAND Flash */ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, int column, int page_addr) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; DEBUG(MTD_DEBUG_LEVEL3, "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n", command, column, page_addr); /* Reset command state information */ host->status_request = false; /* Command pre-processing step */ switch (command) { case NAND_CMD_STATUS: host->buf_start = 0; host->status_request = true; send_cmd(host, command, true); mxc_do_addr_cycle(mtd, column, page_addr); break; case NAND_CMD_READ0: case NAND_CMD_READOOB: if (command == NAND_CMD_READ0) host->buf_start = column; else host->buf_start = column + mtd->writesize; if (mtd->writesize > 512) command = NAND_CMD_READ0; /* only READ0 is valid */ send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); if (mtd->writesize > 512) send_cmd(host, NAND_CMD_READSTART, true); send_page(mtd, NFC_OUTPUT); memcpy(host->data_buf, host->main_area0, mtd->writesize); copy_spare(mtd, true); break; case NAND_CMD_SEQIN: if (column >= mtd->writesize) { /* * FIXME: before send SEQIN command for write OOB, * We must read one page out. * For K9F1GXX has no READ1 command to set current HW * pointer to spare area, we must write the whole page * including OOB together. */ if (mtd->writesize > 512) /* call ourself to read a page */ mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr); host->buf_start = column; /* Set program pointer to spare region */ if (mtd->writesize == 512) send_cmd(host, NAND_CMD_READOOB, false); } else { host->buf_start = column; /* Set program pointer to page start */ if (mtd->writesize == 512) send_cmd(host, NAND_CMD_READ0, false); } send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); break; case NAND_CMD_PAGEPROG: memcpy(host->main_area0, host->data_buf, mtd->writesize); copy_spare(mtd, false); send_page(mtd, NFC_INPUT); send_cmd(host, command, true); mxc_do_addr_cycle(mtd, column, page_addr); break; case NAND_CMD_READID: send_cmd(host, command, true); mxc_do_addr_cycle(mtd, column, page_addr); send_read_id(host); host->buf_start = column; break; case NAND_CMD_ERASE1: case NAND_CMD_ERASE2: send_cmd(host, command, false); mxc_do_addr_cycle(mtd, column, page_addr); break; } } /* * The generic flash bbt decriptors overlap with our ecc * hardware, so define some i.MX specific ones. */ static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' }; static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' }; static struct nand_bbt_descr bbt_main_descr = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, .offs = 0, .len = 4, .veroffs = 4, .maxblocks = 4, .pattern = bbt_pattern, }; static struct nand_bbt_descr bbt_mirror_descr = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, .offs = 0, .len = 4, .veroffs = 4, .maxblocks = 4, .pattern = mirror_pattern, }; static int __init mxcnd_probe(struct platform_device *pdev) { struct nand_chip *this; struct mtd_info *mtd; struct mxc_nand_platform_data *pdata = pdev->dev.platform_data; struct mxc_nand_host *host; struct resource *res; uint16_t tmp; int err = 0, nr_parts = 0; struct nand_ecclayout *oob_smallpage, *oob_largepage; /* Allocate memory for MTD device structure and private data */ host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, GFP_KERNEL); if (!host) return -ENOMEM; host->data_buf = (uint8_t *)(host + 1); host->dev = &pdev->dev; /* structures must be linked */ this = &host->nand; mtd = &host->mtd; mtd->priv = this; mtd->owner = THIS_MODULE; mtd->dev.parent = &pdev->dev; mtd->name = DRIVER_NAME; /* 50 us command delay time */ this->chip_delay = 5; this->priv = host; this->dev_ready = mxc_nand_dev_ready; this->cmdfunc = mxc_nand_command; this->select_chip = mxc_nand_select_chip; this->read_byte = mxc_nand_read_byte; this->read_word = mxc_nand_read_word; this->write_buf = mxc_nand_write_buf; this->read_buf = mxc_nand_read_buf; this->verify_buf = mxc_nand_verify_buf; host->clk = clk_get(&pdev->dev, "nfc"); if (IS_ERR(host->clk)) { err = PTR_ERR(host->clk); goto eclk; } clk_enable(host->clk); host->clk_act = 1; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { err = -ENODEV; goto eres; } host->base = ioremap(res->start, resource_size(res)); if (!host->base) { err = -ENOMEM; goto eres; } host->main_area0 = host->base; host->main_area1 = host->base + 0x200; if (nfc_is_v21()) { host->regs = host->base + 0x1000; host->spare0 = host->base + 0x1000; host->spare_len = 64; oob_smallpage = &nandv2_hw_eccoob_smallpage; oob_largepage = &nandv2_hw_eccoob_largepage; } else if (nfc_is_v1()) { host->regs = host->base; host->spare0 = host->base + 0x800; host->spare_len = 16; oob_smallpage = &nandv1_hw_eccoob_smallpage; oob_largepage = &nandv1_hw_eccoob_largepage; } else BUG(); /* disable interrupt and spare enable */ tmp = readw(host->regs + NFC_CONFIG1); tmp |= NFC_INT_MSK; tmp &= ~NFC_SP_EN; writew(tmp, host->regs + NFC_CONFIG1); init_waitqueue_head(&host->irq_waitq); host->irq = platform_get_irq(pdev, 0); err = request_irq(host->irq, mxc_nfc_irq, 0, DRIVER_NAME, host); if (err) goto eirq; /* Reset NAND */ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); /* preset operation */ /* Unlock the internal RAM Buffer */ writew(0x2, host->regs + NFC_CONFIG); /* Blocks to be unlocked */ if (nfc_is_v21()) { writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR); writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR); this->ecc.bytes = 9; } else if (nfc_is_v1()) { writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR); writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR); this->ecc.bytes = 3; } else BUG(); /* Unlock Block Command for given address range */ writew(0x4, host->regs + NFC_WRPROT); this->ecc.size = 512; this->ecc.layout = oob_smallpage; if (pdata->hw_ecc) { this->ecc.calculate = mxc_nand_calculate_ecc; this->ecc.hwctl = mxc_nand_enable_hwecc; this->ecc.correct = mxc_nand_correct_data; this->ecc.mode = NAND_ECC_HW; tmp = readw(host->regs + NFC_CONFIG1); tmp |= NFC_ECC_EN; writew(tmp, host->regs + NFC_CONFIG1); } else { this->ecc.mode = NAND_ECC_SOFT; tmp = readw(host->regs + NFC_CONFIG1); tmp &= ~NFC_ECC_EN; writew(tmp, host->regs + NFC_CONFIG1); } /* NAND bus width determines access funtions used by upper layer */ if (pdata->width == 2) this->options |= NAND_BUSWIDTH_16; if (pdata->flash_bbt) { this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; /* update flash based bbt */ this->options |= NAND_USE_FLASH_BBT; } /* first scan to find the device and get the page size */ if (nand_scan_ident(mtd, 1)) { err = -ENXIO; goto escan; } if (mtd->writesize == 2048) this->ecc.layout = oob_largepage; /* second phase scan */ if (nand_scan_tail(mtd)) { err = -ENXIO; goto escan; } /* Register the partitions */ #ifdef CONFIG_MTD_PARTITIONS nr_parts = parse_mtd_partitions(mtd, part_probes, &host->parts, 0); if (nr_parts > 0) add_mtd_partitions(mtd, host->parts, nr_parts); else #endif { pr_info("Registering %s as whole device\n", mtd->name); add_mtd_device(mtd); } platform_set_drvdata(pdev, host); return 0; escan: free_irq(host->irq, host); eirq: iounmap(host->base); eres: clk_put(host->clk); eclk: kfree(host); return err; } static int __devexit mxcnd_remove(struct platform_device *pdev) { struct mxc_nand_host *host = platform_get_drvdata(pdev); clk_put(host->clk); platform_set_drvdata(pdev, NULL); nand_release(&host->mtd); free_irq(host->irq, host); iounmap(host->base); kfree(host); return 0; } #ifdef CONFIG_PM static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state) { struct mtd_info *mtd = platform_get_drvdata(pdev); struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n"); ret = mtd->suspend(mtd); /* * nand_suspend locks the device for exclusive access, so * the clock must already be off. */ BUG_ON(!ret && host->clk_act); return ret; } static int mxcnd_resume(struct platform_device *pdev) { struct mtd_info *mtd = platform_get_drvdata(pdev); struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n"); mtd->resume(mtd); return ret; } #else # define mxcnd_suspend NULL # define mxcnd_resume NULL #endif /* CONFIG_PM */ static struct platform_driver mxcnd_driver = { .driver = { .name = DRIVER_NAME, }, .remove = __devexit_p(mxcnd_remove), .suspend = mxcnd_suspend, .resume = mxcnd_resume, }; static int __init mxc_nd_init(void) { return platform_driver_probe(&mxcnd_driver, mxcnd_probe); } static void __exit mxc_nd_cleanup(void) { /* Unregister the device structure */ platform_driver_unregister(&mxcnd_driver); } module_init(mxc_nd_init); module_exit(mxc_nd_cleanup); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("MXC NAND MTD driver"); MODULE_LICENSE("GPL");