/* * Copyright (c) 2016, BayLibre, SAS. All rights reserved. * Author: Neil Armstrong * * Copyright (c) 2010, Code Aurora Forum. All rights reserved. * * Driver for Semtech SX150X I2C GPIO Expanders * * Author: Gregory Bean * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "core.h" #include "pinconf.h" #include "pinctrl-utils.h" /* The chip models of sx150x */ enum { SX150X_123 = 0, SX150X_456, SX150X_789, }; struct sx150x_123_pri { u8 reg_pld_mode; u8 reg_pld_table0; u8 reg_pld_table1; u8 reg_pld_table2; u8 reg_pld_table3; u8 reg_pld_table4; u8 reg_advance; }; struct sx150x_456_pri { u8 reg_pld_mode; u8 reg_pld_table0; u8 reg_pld_table1; u8 reg_pld_table2; u8 reg_pld_table3; u8 reg_pld_table4; u8 reg_advance; }; struct sx150x_789_pri { u8 reg_drain; u8 reg_polarity; u8 reg_clock; u8 reg_misc; u8 reg_reset; u8 ngpios; }; struct sx150x_device_data { u8 model; u8 reg_pullup; u8 reg_pulldn; u8 reg_dir; u8 reg_data; u8 reg_irq_mask; u8 reg_irq_src; u8 reg_sense; u8 ngpios; union { struct sx150x_123_pri x123; struct sx150x_456_pri x456; struct sx150x_789_pri x789; } pri; const struct pinctrl_pin_desc *pins; unsigned int npins; }; struct sx150x_pinctrl { struct device *dev; struct i2c_client *client; struct pinctrl_dev *pctldev; struct pinctrl_desc pinctrl_desc; struct gpio_chip gpio; struct irq_chip irq_chip; struct { int update; u32 sense; u32 masked; u32 dev_sense; u32 dev_masked; } irq; struct mutex lock; const struct sx150x_device_data *data; }; static const struct pinctrl_pin_desc sx150x_8_pins[] = { PINCTRL_PIN(0, "gpio0"), PINCTRL_PIN(1, "gpio1"), PINCTRL_PIN(2, "gpio2"), PINCTRL_PIN(3, "gpio3"), PINCTRL_PIN(4, "gpio4"), PINCTRL_PIN(5, "gpio5"), PINCTRL_PIN(6, "gpio6"), PINCTRL_PIN(7, "gpio7"), PINCTRL_PIN(8, "oscio"), }; static const struct pinctrl_pin_desc sx150x_16_pins[] = { PINCTRL_PIN(0, "gpio0"), PINCTRL_PIN(1, "gpio1"), PINCTRL_PIN(2, "gpio2"), PINCTRL_PIN(3, "gpio3"), PINCTRL_PIN(4, "gpio4"), PINCTRL_PIN(5, "gpio5"), PINCTRL_PIN(6, "gpio6"), PINCTRL_PIN(7, "gpio7"), PINCTRL_PIN(8, "gpio8"), PINCTRL_PIN(9, "gpio9"), PINCTRL_PIN(10, "gpio10"), PINCTRL_PIN(11, "gpio11"), PINCTRL_PIN(12, "gpio12"), PINCTRL_PIN(13, "gpio13"), PINCTRL_PIN(14, "gpio14"), PINCTRL_PIN(15, "gpio15"), PINCTRL_PIN(16, "oscio"), }; static const struct sx150x_device_data sx1508q_device_data = { .model = SX150X_789, .reg_pullup = 0x03, .reg_pulldn = 0x04, .reg_dir = 0x07, .reg_data = 0x08, .reg_irq_mask = 0x09, .reg_irq_src = 0x0c, .reg_sense = 0x0b, .pri.x789 = { .reg_drain = 0x05, .reg_polarity = 0x06, .reg_clock = 0x0f, .reg_misc = 0x10, .reg_reset = 0x7d, }, .ngpios = 8, .pins = sx150x_8_pins, .npins = ARRAY_SIZE(sx150x_8_pins), }; static const struct sx150x_device_data sx1509q_device_data = { .model = SX150X_789, .reg_pullup = 0x07, .reg_pulldn = 0x09, .reg_dir = 0x0f, .reg_data = 0x11, .reg_irq_mask = 0x13, .reg_irq_src = 0x19, .reg_sense = 0x17, .pri.x789 = { .reg_drain = 0x0b, .reg_polarity = 0x0d, .reg_clock = 0x1e, .reg_misc = 0x1f, .reg_reset = 0x7d, }, .ngpios = 16, .pins = sx150x_16_pins, .npins = ARRAY_SIZE(sx150x_16_pins), }; static const struct sx150x_device_data sx1506q_device_data = { .model = SX150X_456, .reg_pullup = 0x05, .reg_pulldn = 0x07, .reg_dir = 0x03, .reg_data = 0x01, .reg_irq_mask = 0x09, .reg_irq_src = 0x0f, .reg_sense = 0x0d, .pri.x456 = { .reg_pld_mode = 0x21, .reg_pld_table0 = 0x23, .reg_pld_table1 = 0x25, .reg_pld_table2 = 0x27, .reg_pld_table3 = 0x29, .reg_pld_table4 = 0x2b, .reg_advance = 0xad, }, .ngpios = 16, .pins = sx150x_16_pins, .npins = 16, /* oscio not available */ }; static const struct sx150x_device_data sx1502q_device_data = { .model = SX150X_123, .reg_pullup = 0x02, .reg_pulldn = 0x03, .reg_dir = 0x01, .reg_data = 0x00, .reg_irq_mask = 0x05, .reg_irq_src = 0x08, .reg_sense = 0x07, .pri.x123 = { .reg_pld_mode = 0x10, .reg_pld_table0 = 0x11, .reg_pld_table1 = 0x12, .reg_pld_table2 = 0x13, .reg_pld_table3 = 0x14, .reg_pld_table4 = 0x15, .reg_advance = 0xad, }, .ngpios = 8, .pins = sx150x_8_pins, .npins = 8, /* oscio not available */ }; static const struct sx150x_device_data sx1503q_device_data = { .model = SX150X_123, .reg_pullup = 0x05, .reg_pulldn = 0x07, .reg_dir = 0x03, .reg_data = 0x01, .reg_irq_mask = 0x09, .reg_irq_src = 0x0f, .reg_sense = 0x07, .pri.x123 = { .reg_pld_mode = 0x10, .reg_pld_table0 = 0x11, .reg_pld_table1 = 0x12, .reg_pld_table2 = 0x13, .reg_pld_table3 = 0x14, .reg_pld_table4 = 0x15, .reg_advance = 0xad, }, .ngpios = 16, .pins = sx150x_16_pins, .npins = 16, /* oscio not available */ }; static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val) { s32 err = i2c_smbus_write_byte_data(client, reg, val); if (err < 0) dev_warn(&client->dev, "i2c write fail: can't write %02x to %02x: %d\n", val, reg, err); return err; } static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val) { s32 err = i2c_smbus_read_byte_data(client, reg); if (err >= 0) *val = err; else dev_warn(&client->dev, "i2c read fail: can't read from %02x: %d\n", reg, err); return err; } /* * These utility functions solve the common problem of locating and setting * configuration bits. Configuration bits are grouped into registers * whose indexes increase downwards. For example, with eight-bit registers, * sixteen gpios would have their config bits grouped in the following order: * REGISTER N-1 [ f e d c b a 9 8 ] * N [ 7 6 5 4 3 2 1 0 ] * * For multi-bit configurations, the pattern gets wider: * REGISTER N-3 [ f f e e d d c c ] * N-2 [ b b a a 9 9 8 8 ] * N-1 [ 7 7 6 6 5 5 4 4 ] * N [ 3 3 2 2 1 1 0 0 ] * * Given the address of the starting register 'N', the index of the gpio * whose configuration we seek to change, and the width in bits of that * configuration, these functions allow us to locate the correct * register and mask the correct bits. */ static inline void sx150x_find_cfg(u8 offset, u8 width, u8 *reg, u8 *mask, u8 *shift) { *reg -= offset * width / 8; *mask = (1 << width) - 1; *shift = (offset * width) % 8; *mask <<= *shift; } static int sx150x_write_cfg(struct i2c_client *client, u8 offset, u8 width, u8 reg, u8 val) { u8 mask; u8 data; u8 shift; int err; sx150x_find_cfg(offset, width, ®, &mask, &shift); err = sx150x_i2c_read(client, reg, &data); if (err < 0) return err; data &= ~mask; data |= (val << shift) & mask; return sx150x_i2c_write(client, reg, data); } static int sx150x_read_cfg(struct i2c_client *client, u8 offset, u8 width, u8 reg) { u8 mask; u8 data; u8 shift; int err; sx150x_find_cfg(offset, width, ®, &mask, &shift); err = sx150x_i2c_read(client, reg, &data); if (err < 0) return err; return (data & mask); } static int sx150x_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) { return 0; } static const char *sx150x_pinctrl_get_group_name(struct pinctrl_dev *pctldev, unsigned int group) { return NULL; } static int sx150x_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, unsigned int group, const unsigned int **pins, unsigned int *num_pins) { return -ENOTSUPP; } static const struct pinctrl_ops sx150x_pinctrl_ops = { .get_groups_count = sx150x_pinctrl_get_groups_count, .get_group_name = sx150x_pinctrl_get_group_name, .get_group_pins = sx150x_pinctrl_get_group_pins, #ifdef CONFIG_OF .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, .dt_free_map = pinctrl_utils_free_map, #endif }; static bool sx150x_pin_is_oscio(struct sx150x_pinctrl *pctl, unsigned int pin) { if (pin >= pctl->data->npins) return false; /* OSCIO pin is only present in 789 devices */ if (pctl->data->model != SX150X_789) return false; return !strcmp(pctl->data->pins[pin].name, "oscio"); } static int sx150x_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) { struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); int status; if (sx150x_pin_is_oscio(pctl, offset)) return false; status = sx150x_read_cfg(pctl->client, offset, 1, pctl->data->reg_dir); if (status >= 0) status = !!status; return status; } static int sx150x_gpio_get(struct gpio_chip *chip, unsigned int offset) { struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); int status; if (sx150x_pin_is_oscio(pctl, offset)) return -EINVAL; status = sx150x_read_cfg(pctl->client, offset, 1, pctl->data->reg_data); if (status >= 0) status = !!status; return status; } static int sx150x_gpio_set_single_ended(struct gpio_chip *chip, unsigned int offset, enum single_ended_mode mode) { struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); int ret; switch (mode) { case LINE_MODE_PUSH_PULL: if (pctl->data->model != SX150X_789 || sx150x_pin_is_oscio(pctl, offset)) return 0; mutex_lock(&pctl->lock); ret = sx150x_write_cfg(pctl->client, offset, 1, pctl->data->pri.x789.reg_drain, 0); mutex_unlock(&pctl->lock); if (ret < 0) return ret; break; case LINE_MODE_OPEN_DRAIN: if (pctl->data->model != SX150X_789 || sx150x_pin_is_oscio(pctl, offset)) return -ENOTSUPP; mutex_lock(&pctl->lock); ret = sx150x_write_cfg(pctl->client, offset, 1, pctl->data->pri.x789.reg_drain, 1); mutex_unlock(&pctl->lock); if (ret < 0) return ret; break; default: return -ENOTSUPP; } return 0; } static void sx150x_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) { struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); if (sx150x_pin_is_oscio(pctl, offset)) { mutex_lock(&pctl->lock); sx150x_i2c_write(pctl->client, pctl->data->pri.x789.reg_clock, (value ? 0x1f : 0x10)); mutex_unlock(&pctl->lock); } else { mutex_lock(&pctl->lock); sx150x_write_cfg(pctl->client, offset, 1, pctl->data->reg_data, (value ? 1 : 0)); mutex_unlock(&pctl->lock); } } static int sx150x_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) { struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); int ret; if (sx150x_pin_is_oscio(pctl, offset)) return -EINVAL; mutex_lock(&pctl->lock); ret = sx150x_write_cfg(pctl->client, offset, 1, pctl->data->reg_dir, 1); mutex_unlock(&pctl->lock); return ret; } static int sx150x_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value) { struct sx150x_pinctrl *pctl = gpiochip_get_data(chip); int status; if (sx150x_pin_is_oscio(pctl, offset)) { sx150x_gpio_set(chip, offset, value); return 0; } mutex_lock(&pctl->lock); status = sx150x_write_cfg(pctl->client, offset, 1, pctl->data->reg_data, (value ? 1 : 0)); if (status >= 0) status = sx150x_write_cfg(pctl->client, offset, 1, pctl->data->reg_dir, 0); mutex_unlock(&pctl->lock); return status; } static void sx150x_irq_mask(struct irq_data *d) { struct sx150x_pinctrl *pctl = gpiochip_get_data(irq_data_get_irq_chip_data(d)); unsigned int n = d->hwirq; pctl->irq.masked |= (1 << n); pctl->irq.update = n; } static void sx150x_irq_unmask(struct irq_data *d) { struct sx150x_pinctrl *pctl = gpiochip_get_data(irq_data_get_irq_chip_data(d)); unsigned int n = d->hwirq; pctl->irq.masked &= ~(1 << n); pctl->irq.update = n; } static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type) { struct sx150x_pinctrl *pctl = gpiochip_get_data(irq_data_get_irq_chip_data(d)); unsigned int n, val = 0; if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) return -EINVAL; n = d->hwirq; if (flow_type & IRQ_TYPE_EDGE_RISING) val |= 0x1; if (flow_type & IRQ_TYPE_EDGE_FALLING) val |= 0x2; pctl->irq.sense &= ~(3UL << (n * 2)); pctl->irq.sense |= val << (n * 2); pctl->irq.update = n; return 0; } static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id) { struct sx150x_pinctrl *pctl = (struct sx150x_pinctrl *)dev_id; unsigned int nhandled = 0; unsigned int sub_irq; unsigned int n; s32 err; u8 val; int i; for (i = (pctl->data->ngpios / 8) - 1; i >= 0; --i) { err = sx150x_i2c_read(pctl->client, pctl->data->reg_irq_src - i, &val); if (err < 0) continue; err = sx150x_i2c_write(pctl->client, pctl->data->reg_irq_src - i, val); if (err < 0) continue; for (n = 0; n < 8; ++n) { if (val & (1 << n)) { sub_irq = irq_find_mapping( pctl->gpio.irqdomain, (i * 8) + n); handle_nested_irq(sub_irq); ++nhandled; } } } return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE); } static void sx150x_irq_bus_lock(struct irq_data *d) { struct sx150x_pinctrl *pctl = gpiochip_get_data(irq_data_get_irq_chip_data(d)); mutex_lock(&pctl->lock); } static void sx150x_irq_bus_sync_unlock(struct irq_data *d) { struct sx150x_pinctrl *pctl = gpiochip_get_data(irq_data_get_irq_chip_data(d)); unsigned int n; if (pctl->irq.update < 0) goto out; n = pctl->irq.update; pctl->irq.update = -1; /* Avoid updates if nothing changed */ if (pctl->irq.dev_sense == pctl->irq.sense && pctl->irq.dev_masked == pctl->irq.masked) goto out; pctl->irq.dev_sense = pctl->irq.sense; pctl->irq.dev_masked = pctl->irq.masked; if (pctl->irq.masked & (1 << n)) { sx150x_write_cfg(pctl->client, n, 1, pctl->data->reg_irq_mask, 1); sx150x_write_cfg(pctl->client, n, 2, pctl->data->reg_sense, 0); } else { sx150x_write_cfg(pctl->client, n, 1, pctl->data->reg_irq_mask, 0); sx150x_write_cfg(pctl->client, n, 2, pctl->data->reg_sense, pctl->irq.sense >> (n * 2)); } out: mutex_unlock(&pctl->lock); } static int sx150x_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, unsigned long *config) { struct sx150x_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); unsigned int param = pinconf_to_config_param(*config); int ret; u32 arg; if (sx150x_pin_is_oscio(pctl, pin)) { u8 data; switch (param) { case PIN_CONFIG_DRIVE_PUSH_PULL: case PIN_CONFIG_OUTPUT: mutex_lock(&pctl->lock); ret = sx150x_i2c_read(pctl->client, pctl->data->pri.x789.reg_clock, &data); mutex_unlock(&pctl->lock); if (ret < 0) return ret; if (param == PIN_CONFIG_DRIVE_PUSH_PULL) arg = (data & 0x1f) ? 1 : 0; else { if ((data & 0x1f) == 0x1f) arg = 1; else if ((data & 0x1f) == 0x10) arg = 0; else return -EINVAL; } break; default: return -ENOTSUPP; } goto out; } switch (param) { case PIN_CONFIG_BIAS_PULL_DOWN: mutex_lock(&pctl->lock); ret = sx150x_read_cfg(pctl->client, pin, 1, pctl->data->reg_pulldn); mutex_unlock(&pctl->lock); if (ret < 0) return ret; if (!ret) return -EINVAL; arg = 1; break; case PIN_CONFIG_BIAS_PULL_UP: mutex_lock(&pctl->lock); ret = sx150x_read_cfg(pctl->client, pin, 1, pctl->data->reg_pullup); mutex_unlock(&pctl->lock); if (ret < 0) return ret; if (!ret) return -EINVAL; arg = 1; break; case PIN_CONFIG_DRIVE_OPEN_DRAIN: if (pctl->data->model != SX150X_789) return -ENOTSUPP; mutex_lock(&pctl->lock); ret = sx150x_read_cfg(pctl->client, pin, 1, pctl->data->pri.x789.reg_drain); mutex_unlock(&pctl->lock); if (ret < 0) return ret; if (!ret) return -EINVAL; arg = 1; break; case PIN_CONFIG_DRIVE_PUSH_PULL: if (pctl->data->model != SX150X_789) arg = true; else { mutex_lock(&pctl->lock); ret = sx150x_read_cfg(pctl->client, pin, 1, pctl->data->pri.x789.reg_drain); mutex_unlock(&pctl->lock); if (ret < 0) return ret; if (ret) return -EINVAL; arg = 1; } break; case PIN_CONFIG_OUTPUT: ret = sx150x_gpio_get_direction(&pctl->gpio, pin); if (ret < 0) return ret; if (ret) return -EINVAL; ret = sx150x_gpio_get(&pctl->gpio, pin); if (ret < 0) return ret; arg = ret; break; default: return -ENOTSUPP; } out: *config = pinconf_to_config_packed(param, arg); return 0; } static int sx150x_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, unsigned long *configs, unsigned int num_configs) { struct sx150x_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); enum pin_config_param param; u32 arg; int i; int ret; for (i = 0; i < num_configs; i++) { param = pinconf_to_config_param(configs[i]); arg = pinconf_to_config_argument(configs[i]); if (sx150x_pin_is_oscio(pctl, pin)) { if (param == PIN_CONFIG_OUTPUT) { ret = sx150x_gpio_direction_output(&pctl->gpio, pin, arg); if (ret < 0) return ret; continue; } else return -ENOTSUPP; } switch (param) { case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: case PIN_CONFIG_BIAS_DISABLE: mutex_lock(&pctl->lock); ret = sx150x_write_cfg(pctl->client, pin, 1, pctl->data->reg_pulldn, 0); mutex_unlock(&pctl->lock); if (ret < 0) return ret; mutex_lock(&pctl->lock); ret = sx150x_write_cfg(pctl->client, pin, 1, pctl->data->reg_pullup, 0); mutex_unlock(&pctl->lock); if (ret < 0) return ret; break; case PIN_CONFIG_BIAS_PULL_UP: mutex_lock(&pctl->lock); ret = sx150x_write_cfg(pctl->client, pin, 1, pctl->data->reg_pullup, 1); mutex_unlock(&pctl->lock); if (ret < 0) return ret; break; case PIN_CONFIG_BIAS_PULL_DOWN: mutex_lock(&pctl->lock); ret = sx150x_write_cfg(pctl->client, pin, 1, pctl->data->reg_pulldn, 1); mutex_unlock(&pctl->lock); if (ret < 0) return ret; break; case PIN_CONFIG_DRIVE_OPEN_DRAIN: ret = sx150x_gpio_set_single_ended(&pctl->gpio, pin, LINE_MODE_OPEN_DRAIN); if (ret < 0) return ret; break; case PIN_CONFIG_DRIVE_PUSH_PULL: ret = sx150x_gpio_set_single_ended(&pctl->gpio, pin, LINE_MODE_PUSH_PULL); if (ret < 0) return ret; break; case PIN_CONFIG_OUTPUT: ret = sx150x_gpio_direction_output(&pctl->gpio, pin, arg); if (ret < 0) return ret; break; default: return -ENOTSUPP; } } /* for each config */ return 0; } static const struct pinconf_ops sx150x_pinconf_ops = { .pin_config_get = sx150x_pinconf_get, .pin_config_set = sx150x_pinconf_set, .is_generic = true, }; static const struct i2c_device_id sx150x_id[] = { {"sx1508q", (kernel_ulong_t) &sx1508q_device_data }, {"sx1509q", (kernel_ulong_t) &sx1509q_device_data }, {"sx1506q", (kernel_ulong_t) &sx1506q_device_data }, {"sx1502q", (kernel_ulong_t) &sx1502q_device_data }, {"sx1503q", (kernel_ulong_t) &sx1503q_device_data }, {} }; static const struct of_device_id sx150x_of_match[] = { { .compatible = "semtech,sx1508q", .data = &sx1508q_device_data }, { .compatible = "semtech,sx1509q", .data = &sx1509q_device_data }, { .compatible = "semtech,sx1506q", .data = &sx1506q_device_data }, { .compatible = "semtech,sx1502q", .data = &sx1502q_device_data }, { .compatible = "semtech,sx1503q", .data = &sx1503q_device_data }, {}, }; static int sx150x_init_io(struct sx150x_pinctrl *pctl, u8 base, u16 cfg) { int err = 0; unsigned int n; for (n = 0; err >= 0 && n < (pctl->data->ngpios / 8); ++n) err = sx150x_i2c_write(pctl->client, base - n, cfg >> (n * 8)); return err; } static int sx150x_reset(struct sx150x_pinctrl *pctl) { int err; err = i2c_smbus_write_byte_data(pctl->client, pctl->data->pri.x789.reg_reset, 0x12); if (err < 0) return err; err = i2c_smbus_write_byte_data(pctl->client, pctl->data->pri.x789.reg_reset, 0x34); return err; } static int sx150x_init_hw(struct sx150x_pinctrl *pctl) { int err; if (pctl->data->model == SX150X_789 && of_property_read_bool(pctl->dev->of_node, "semtech,probe-reset")) { err = sx150x_reset(pctl); if (err < 0) return err; } if (pctl->data->model == SX150X_789) err = sx150x_i2c_write(pctl->client, pctl->data->pri.x789.reg_misc, 0x01); else if (pctl->data->model == SX150X_456) err = sx150x_i2c_write(pctl->client, pctl->data->pri.x456.reg_advance, 0x04); else err = sx150x_i2c_write(pctl->client, pctl->data->pri.x123.reg_advance, 0x00); if (err < 0) return err; /* Set all pins to work in normal mode */ if (pctl->data->model == SX150X_789) { err = sx150x_init_io(pctl, pctl->data->pri.x789.reg_polarity, 0); if (err < 0) return err; } else if (pctl->data->model == SX150X_456) { /* Set all pins to work in normal mode */ err = sx150x_init_io(pctl, pctl->data->pri.x456.reg_pld_mode, 0); if (err < 0) return err; } else { /* Set all pins to work in normal mode */ err = sx150x_init_io(pctl, pctl->data->pri.x123.reg_pld_mode, 0); if (err < 0) return err; } return 0; } static int sx150x_probe(struct i2c_client *client, const struct i2c_device_id *id) { static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_WORD_DATA; struct device *dev = &client->dev; struct sx150x_pinctrl *pctl; int ret; if (!i2c_check_functionality(client->adapter, i2c_funcs)) return -ENOSYS; pctl = devm_kzalloc(dev, sizeof(*pctl), GFP_KERNEL); if (!pctl) return -ENOMEM; pctl->dev = dev; pctl->client = client; if (dev->of_node) pctl->data = of_device_get_match_data(dev); else pctl->data = (struct sx150x_device_data *)id->driver_data; if (!pctl->data) return -EINVAL; mutex_init(&pctl->lock); ret = sx150x_init_hw(pctl); if (ret) return ret; /* Register GPIO controller */ pctl->gpio.label = devm_kstrdup(dev, client->name, GFP_KERNEL); pctl->gpio.base = -1; pctl->gpio.ngpio = pctl->data->npins; pctl->gpio.get_direction = sx150x_gpio_get_direction; pctl->gpio.direction_input = sx150x_gpio_direction_input; pctl->gpio.direction_output = sx150x_gpio_direction_output; pctl->gpio.get = sx150x_gpio_get; pctl->gpio.set = sx150x_gpio_set; pctl->gpio.set_single_ended = sx150x_gpio_set_single_ended; pctl->gpio.parent = dev; #ifdef CONFIG_OF_GPIO pctl->gpio.of_node = dev->of_node; #endif pctl->gpio.can_sleep = true; ret = devm_gpiochip_add_data(dev, &pctl->gpio, pctl); if (ret) return ret; /* Add Interrupt support if an irq is specified */ if (client->irq > 0) { pctl->irq_chip.name = devm_kstrdup(dev, client->name, GFP_KERNEL); pctl->irq_chip.irq_mask = sx150x_irq_mask; pctl->irq_chip.irq_unmask = sx150x_irq_unmask; pctl->irq_chip.irq_set_type = sx150x_irq_set_type; pctl->irq_chip.irq_bus_lock = sx150x_irq_bus_lock; pctl->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock; pctl->irq.masked = ~0; pctl->irq.sense = 0; pctl->irq.dev_masked = ~0; pctl->irq.dev_sense = 0; pctl->irq.update = -1; ret = gpiochip_irqchip_add(&pctl->gpio, &pctl->irq_chip, 0, handle_edge_irq, IRQ_TYPE_NONE); if (ret) { dev_err(dev, "could not connect irqchip to gpiochip\n"); return ret; } ret = devm_request_threaded_irq(dev, client->irq, NULL, sx150x_irq_thread_fn, IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_FALLING, pctl->irq_chip.name, pctl); if (ret < 0) return ret; } /* Pinctrl_desc */ pctl->pinctrl_desc.name = "sx150x-pinctrl"; pctl->pinctrl_desc.pctlops = &sx150x_pinctrl_ops; pctl->pinctrl_desc.confops = &sx150x_pinconf_ops; pctl->pinctrl_desc.pins = pctl->data->pins; pctl->pinctrl_desc.npins = pctl->data->npins; pctl->pinctrl_desc.owner = THIS_MODULE; pctl->pctldev = pinctrl_register(&pctl->pinctrl_desc, dev, pctl); if (IS_ERR(pctl->pctldev)) { dev_err(dev, "Failed to register pinctrl device\n"); return PTR_ERR(pctl->pctldev); } return 0; } static struct i2c_driver sx150x_driver = { .driver = { .name = "sx150x-pinctrl", .of_match_table = of_match_ptr(sx150x_of_match), }, .probe = sx150x_probe, .id_table = sx150x_id, }; static int __init sx150x_init(void) { return i2c_add_driver(&sx150x_driver); } subsys_initcall(sx150x_init);