/* Freescale Enhanced Local Bus Controller NAND driver * * Copyright © 2006-2007, 2010 Freescale Semiconductor * * Authors: Nick Spence , * Scott Wood * Jack Lan * Roy Zang * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define MAX_BANKS 8 #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */ #define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */ /* mtd information per set */ struct fsl_elbc_mtd { struct mtd_info mtd; struct nand_chip chip; struct fsl_lbc_ctrl *ctrl; struct device *dev; int bank; /* Chip select bank number */ u8 __iomem *vbase; /* Chip select base virtual address */ int page_size; /* NAND page size (0=512, 1=2048) */ unsigned int fmr; /* FCM Flash Mode Register value */ }; /* Freescale eLBC FCM controller information */ struct fsl_elbc_fcm_ctrl { struct nand_hw_control controller; struct fsl_elbc_mtd *chips[MAX_BANKS]; u8 __iomem *addr; /* Address of assigned FCM buffer */ unsigned int page; /* Last page written to / read from */ unsigned int read_bytes; /* Number of bytes read during command */ unsigned int column; /* Saved column from SEQIN */ unsigned int index; /* Pointer to next byte to 'read' */ unsigned int status; /* status read from LTESR after last op */ unsigned int mdr; /* UPM/FCM Data Register value */ unsigned int use_mdr; /* Non zero if the MDR is to be set */ unsigned int oob; /* Non zero if operating on OOB data */ unsigned int counter; /* counter for the initializations */ unsigned int max_bitflips; /* Saved during READ0 cmd */ }; /* These map to the positions used by the FCM hardware ECC generator */ /* Small Page FLASH with FMR[ECCM] = 0 */ static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = { .eccbytes = 3, .eccpos = {6, 7, 8}, .oobfree = { {0, 5}, {9, 7} }, }; /* Small Page FLASH with FMR[ECCM] = 1 */ static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = { .eccbytes = 3, .eccpos = {8, 9, 10}, .oobfree = { {0, 5}, {6, 2}, {11, 5} }, }; /* Large Page FLASH with FMR[ECCM] = 0 */ static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = { .eccbytes = 12, .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56}, .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} }, }; /* Large Page FLASH with FMR[ECCM] = 1 */ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = { .eccbytes = 12, .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58}, .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} }, }; /* * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset * 1, so we have to adjust bad block pattern. This pattern should be used for * x8 chips only. So far hardware does not support x16 chips anyway. */ static u8 scan_ff_pattern[] = { 0xff, }; static struct nand_bbt_descr largepage_memorybased = { .options = 0, .offs = 0, .len = 1, .pattern = scan_ff_pattern, }; /* * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt, * interfere with ECC positions, that's why we implement our own descriptors. * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0. */ static u8 bbt_pattern[] = {'B', 'b', 't', '0' }; static u8 mirror_pattern[] = {'1', 't', 'b', 'B' }; static struct nand_bbt_descr bbt_main_descr = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | NAND_BBT_2BIT | NAND_BBT_VERSION, .offs = 11, .len = 4, .veroffs = 15, .maxblocks = 4, .pattern = bbt_pattern, }; static struct nand_bbt_descr bbt_mirror_descr = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | NAND_BBT_2BIT | NAND_BBT_VERSION, .offs = 11, .len = 4, .veroffs = 15, .maxblocks = 4, .pattern = mirror_pattern, }; /*=================================*/ /* * Set up the FCM hardware block and page address fields, and the fcm * structure addr field to point to the correct FCM buffer in memory */ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) { struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_lbc_ctrl *ctrl = priv->ctrl; struct fsl_lbc_regs __iomem *lbc = ctrl->regs; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand; int buf_num; elbc_fcm_ctrl->page = page_addr; if (priv->page_size) { /* * large page size chip : FPAR[PI] save the lowest 6 bits, * FBAR[BLK] save the other bits. */ out_be32(&lbc->fbar, page_addr >> 6); out_be32(&lbc->fpar, ((page_addr << FPAR_LP_PI_SHIFT) & FPAR_LP_PI) | (oob ? FPAR_LP_MS : 0) | column); buf_num = (page_addr & 1) << 2; } else { /* * small page size chip : FPAR[PI] save the lowest 5 bits, * FBAR[BLK] save the other bits. */ out_be32(&lbc->fbar, page_addr >> 5); out_be32(&lbc->fpar, ((page_addr << FPAR_SP_PI_SHIFT) & FPAR_SP_PI) | (oob ? FPAR_SP_MS : 0) | column); buf_num = page_addr & 7; } elbc_fcm_ctrl->addr = priv->vbase + buf_num * 1024; elbc_fcm_ctrl->index = column; /* for OOB data point to the second half of the buffer */ if (oob) elbc_fcm_ctrl->index += priv->page_size ? 2048 : 512; dev_vdbg(priv->dev, "set_addr: bank=%d, " "elbc_fcm_ctrl->addr=0x%p (0x%p), " "index %x, pes %d ps %d\n", buf_num, elbc_fcm_ctrl->addr, priv->vbase, elbc_fcm_ctrl->index, chip->phys_erase_shift, chip->page_shift); } /* * execute FCM command and wait for it to complete */ static int fsl_elbc_run_command(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_lbc_ctrl *ctrl = priv->ctrl; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand; struct fsl_lbc_regs __iomem *lbc = ctrl->regs; /* Setup the FMR[OP] to execute without write protection */ out_be32(&lbc->fmr, priv->fmr | 3); if (elbc_fcm_ctrl->use_mdr) out_be32(&lbc->mdr, elbc_fcm_ctrl->mdr); dev_vdbg(priv->dev, "fsl_elbc_run_command: fmr=%08x fir=%08x fcr=%08x\n", in_be32(&lbc->fmr), in_be32(&lbc->fir), in_be32(&lbc->fcr)); dev_vdbg(priv->dev, "fsl_elbc_run_command: fbar=%08x fpar=%08x " "fbcr=%08x bank=%d\n", in_be32(&lbc->fbar), in_be32(&lbc->fpar), in_be32(&lbc->fbcr), priv->bank); ctrl->irq_status = 0; /* execute special operation */ out_be32(&lbc->lsor, priv->bank); /* wait for FCM complete flag or timeout */ wait_event_timeout(ctrl->irq_wait, ctrl->irq_status, FCM_TIMEOUT_MSECS * HZ/1000); elbc_fcm_ctrl->status = ctrl->irq_status; /* store mdr value in case it was needed */ if (elbc_fcm_ctrl->use_mdr) elbc_fcm_ctrl->mdr = in_be32(&lbc->mdr); elbc_fcm_ctrl->use_mdr = 0; if (elbc_fcm_ctrl->status != LTESR_CC) { dev_info(priv->dev, "command failed: fir %x fcr %x status %x mdr %x\n", in_be32(&lbc->fir), in_be32(&lbc->fcr), elbc_fcm_ctrl->status, elbc_fcm_ctrl->mdr); return -EIO; } if (chip->ecc.mode != NAND_ECC_HW) return 0; elbc_fcm_ctrl->max_bitflips = 0; if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) { uint32_t lteccr = in_be32(&lbc->lteccr); /* * if command was a full page read and the ELBC * has the LTECCR register, then bits 12-15 (ppc order) of * LTECCR indicates which 512 byte sub-pages had fixed errors. * bits 28-31 are uncorrectable errors, marked elsewhere. * for small page nand only 1 bit is used. * if the ELBC doesn't have the lteccr register it reads 0 * FIXME: 4 bits can be corrected on NANDs with 2k pages, so * count the number of sub-pages with bitflips and update * ecc_stats.corrected accordingly. */ if (lteccr & 0x000F000F) out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */ if (lteccr & 0x000F0000) { mtd->ecc_stats.corrected++; elbc_fcm_ctrl->max_bitflips = 1; } } return 0; } static void fsl_elbc_do_read(struct nand_chip *chip, int oob) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_lbc_ctrl *ctrl = priv->ctrl; struct fsl_lbc_regs __iomem *lbc = ctrl->regs; if (priv->page_size) { out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) | (FIR_OP_CA << FIR_OP1_SHIFT) | (FIR_OP_PA << FIR_OP2_SHIFT) | (FIR_OP_CM1 << FIR_OP3_SHIFT) | (FIR_OP_RBW << FIR_OP4_SHIFT)); out_be32(&lbc->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) | (NAND_CMD_READSTART << FCR_CMD1_SHIFT)); } else { out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) | (FIR_OP_CA << FIR_OP1_SHIFT) | (FIR_OP_PA << FIR_OP2_SHIFT) | (FIR_OP_RBW << FIR_OP3_SHIFT)); if (oob) out_be32(&lbc->fcr, NAND_CMD_READOOB << FCR_CMD0_SHIFT); else out_be32(&lbc->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT); } } /* cmdfunc send commands to the FCM */ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, int column, int page_addr) { struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_lbc_ctrl *ctrl = priv->ctrl; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand; struct fsl_lbc_regs __iomem *lbc = ctrl->regs; elbc_fcm_ctrl->use_mdr = 0; /* clear the read buffer */ elbc_fcm_ctrl->read_bytes = 0; if (command != NAND_CMD_PAGEPROG) elbc_fcm_ctrl->index = 0; switch (command) { /* READ0 and READ1 read the entire buffer to use hardware ECC. */ case NAND_CMD_READ1: column += 256; /* fall-through */ case NAND_CMD_READ0: dev_dbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_READ0, page_addr:" " 0x%x, column: 0x%x.\n", page_addr, column); out_be32(&lbc->fbcr, 0); /* read entire page to enable ECC */ set_addr(mtd, 0, page_addr, 0); elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize; elbc_fcm_ctrl->index += column; fsl_elbc_do_read(chip, 0); fsl_elbc_run_command(mtd); return; /* READOOB reads only the OOB because no ECC is performed. */ case NAND_CMD_READOOB: dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_READOOB, page_addr:" " 0x%x, column: 0x%x.\n", page_addr, column); out_be32(&lbc->fbcr, mtd->oobsize - column); set_addr(mtd, column, page_addr, 1); elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize; fsl_elbc_do_read(chip, 1); fsl_elbc_run_command(mtd); return; case NAND_CMD_READID: case NAND_CMD_PARAM: dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD %x\n", command); out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) | (FIR_OP_UA << FIR_OP1_SHIFT) | (FIR_OP_RBW << FIR_OP2_SHIFT)); out_be32(&lbc->fcr, command << FCR_CMD0_SHIFT); /* * although currently it's 8 bytes for READID, we always read * the maximum 256 bytes(for PARAM) */ out_be32(&lbc->fbcr, 256); elbc_fcm_ctrl->read_bytes = 256; elbc_fcm_ctrl->use_mdr = 1; elbc_fcm_ctrl->mdr = column; set_addr(mtd, 0, 0, 0); fsl_elbc_run_command(mtd); return; /* ERASE1 stores the block and page address */ case NAND_CMD_ERASE1: dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE1, " "page_addr: 0x%x.\n", page_addr); set_addr(mtd, 0, page_addr, 0); return; /* ERASE2 uses the block and page address from ERASE1 */ case NAND_CMD_ERASE2: dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n"); out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) | (FIR_OP_PA << FIR_OP1_SHIFT) | (FIR_OP_CM2 << FIR_OP2_SHIFT) | (FIR_OP_CW1 << FIR_OP3_SHIFT) | (FIR_OP_RS << FIR_OP4_SHIFT)); out_be32(&lbc->fcr, (NAND_CMD_ERASE1 << FCR_CMD0_SHIFT) | (NAND_CMD_STATUS << FCR_CMD1_SHIFT) | (NAND_CMD_ERASE2 << FCR_CMD2_SHIFT)); out_be32(&lbc->fbcr, 0); elbc_fcm_ctrl->read_bytes = 0; elbc_fcm_ctrl->use_mdr = 1; fsl_elbc_run_command(mtd); return; /* SEQIN sets up the addr buffer and all registers except the length */ case NAND_CMD_SEQIN: { __be32 fcr; dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, " "page_addr: 0x%x, column: 0x%x.\n", page_addr, column); elbc_fcm_ctrl->column = column; elbc_fcm_ctrl->use_mdr = 1; if (column >= mtd->writesize) { /* OOB area */ column -= mtd->writesize; elbc_fcm_ctrl->oob = 1; } else { WARN_ON(column != 0); elbc_fcm_ctrl->oob = 0; } fcr = (NAND_CMD_STATUS << FCR_CMD1_SHIFT) | (NAND_CMD_SEQIN << FCR_CMD2_SHIFT) | (NAND_CMD_PAGEPROG << FCR_CMD3_SHIFT); if (priv->page_size) { out_be32(&lbc->fir, (FIR_OP_CM2 << FIR_OP0_SHIFT) | (FIR_OP_CA << FIR_OP1_SHIFT) | (FIR_OP_PA << FIR_OP2_SHIFT) | (FIR_OP_WB << FIR_OP3_SHIFT) | (FIR_OP_CM3 << FIR_OP4_SHIFT) | (FIR_OP_CW1 << FIR_OP5_SHIFT) | (FIR_OP_RS << FIR_OP6_SHIFT)); } else { out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) | (FIR_OP_CM2 << FIR_OP1_SHIFT) | (FIR_OP_CA << FIR_OP2_SHIFT) | (FIR_OP_PA << FIR_OP3_SHIFT) | (FIR_OP_WB << FIR_OP4_SHIFT) | (FIR_OP_CM3 << FIR_OP5_SHIFT) | (FIR_OP_CW1 << FIR_OP6_SHIFT) | (FIR_OP_RS << FIR_OP7_SHIFT)); if (elbc_fcm_ctrl->oob) /* OOB area --> READOOB */ fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT; else /* First 256 bytes --> READ0 */ fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT; } out_be32(&lbc->fcr, fcr); set_addr(mtd, column, page_addr, elbc_fcm_ctrl->oob); return; } /* PAGEPROG reuses all of the setup from SEQIN and adds the length */ case NAND_CMD_PAGEPROG: { dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG " "writing %d bytes.\n", elbc_fcm_ctrl->index); /* if the write did not start at 0 or is not a full page * then set the exact length, otherwise use a full page * write so the HW generates the ECC. */ if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 || elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize) out_be32(&lbc->fbcr, elbc_fcm_ctrl->index - elbc_fcm_ctrl->column); else out_be32(&lbc->fbcr, 0); fsl_elbc_run_command(mtd); return; } /* CMD_STATUS must read the status byte while CEB is active */ /* Note - it does not wait for the ready line */ case NAND_CMD_STATUS: out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) | (FIR_OP_RBW << FIR_OP1_SHIFT)); out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT); out_be32(&lbc->fbcr, 1); set_addr(mtd, 0, 0, 0); elbc_fcm_ctrl->read_bytes = 1; fsl_elbc_run_command(mtd); /* The chip always seems to report that it is * write-protected, even when it is not. */ setbits8(elbc_fcm_ctrl->addr, NAND_STATUS_WP); return; /* RESET without waiting for the ready line */ case NAND_CMD_RESET: dev_dbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_RESET.\n"); out_be32(&lbc->fir, FIR_OP_CM0 << FIR_OP0_SHIFT); out_be32(&lbc->fcr, NAND_CMD_RESET << FCR_CMD0_SHIFT); fsl_elbc_run_command(mtd); return; default: dev_err(priv->dev, "fsl_elbc_cmdfunc: error, unsupported command 0x%x.\n", command); } } static void fsl_elbc_select_chip(struct mtd_info *mtd, int chip) { /* The hardware does not seem to support multiple * chips per bank. */ } /* * Write buf to the FCM Controller Data Buffer */ static void fsl_elbc_write_buf(struct mtd_info *mtd, const u8 *buf, int len) { struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand; unsigned int bufsize = mtd->writesize + mtd->oobsize; if (len <= 0) { dev_err(priv->dev, "write_buf of %d bytes", len); elbc_fcm_ctrl->status = 0; return; } if ((unsigned int)len > bufsize - elbc_fcm_ctrl->index) { dev_err(priv->dev, "write_buf beyond end of buffer " "(%d requested, %u available)\n", len, bufsize - elbc_fcm_ctrl->index); len = bufsize - elbc_fcm_ctrl->index; } memcpy_toio(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], buf, len); /* * This is workaround for the weird elbc hangs during nand write, * Scott Wood says: "...perhaps difference in how long it takes a * write to make it through the localbus compared to a write to IMMR * is causing problems, and sync isn't helping for some reason." * Reading back the last byte helps though. */ in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index] + len - 1); elbc_fcm_ctrl->index += len; } /* * read a byte from either the FCM hardware buffer if it has any data left * otherwise issue a command to read a single byte. */ static u8 fsl_elbc_read_byte(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand; /* If there are still bytes in the FCM, then use the next byte. */ if (elbc_fcm_ctrl->index < elbc_fcm_ctrl->read_bytes) return in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index++]); dev_err(priv->dev, "read_byte beyond end of buffer\n"); return ERR_BYTE; } /* * Read from the FCM Controller Data Buffer */ static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len) { struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand; int avail; if (len < 0) return; avail = min((unsigned int)len, elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index); memcpy_fromio(buf, &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], avail); elbc_fcm_ctrl->index += avail; if (len > avail) dev_err(priv->dev, "read_buf beyond end of buffer " "(%d requested, %d available)\n", len, avail); } /* * Verify buffer against the FCM Controller Data Buffer */ static int fsl_elbc_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) { struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand; int i; if (len < 0) { dev_err(priv->dev, "write_buf of %d bytes", len); return -EINVAL; } if ((unsigned int)len > elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index) { dev_err(priv->dev, "verify_buf beyond end of buffer " "(%d requested, %u available)\n", len, elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index); elbc_fcm_ctrl->index = elbc_fcm_ctrl->read_bytes; return -EINVAL; } for (i = 0; i < len; i++) if (in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index + i]) != buf[i]) break; elbc_fcm_ctrl->index += len; return i == len && elbc_fcm_ctrl->status == LTESR_CC ? 0 : -EIO; } /* This function is called after Program and Erase Operations to * check for success or failure. */ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand; if (elbc_fcm_ctrl->status != LTESR_CC) return NAND_STATUS_FAIL; /* The chip always seems to report that it is * write-protected, even when it is not. */ return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP; } static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_lbc_ctrl *ctrl = priv->ctrl; struct fsl_lbc_regs __iomem *lbc = ctrl->regs; unsigned int al; /* calculate FMR Address Length field */ al = 0; if (chip->pagemask & 0xffff0000) al++; if (chip->pagemask & 0xff000000) al++; priv->fmr |= al << FMR_AL_SHIFT; dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n", chip->numchips); dev_dbg(priv->dev, "fsl_elbc_init: nand->chipsize = %lld\n", chip->chipsize); dev_dbg(priv->dev, "fsl_elbc_init: nand->pagemask = %8x\n", chip->pagemask); dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_delay = %d\n", chip->chip_delay); dev_dbg(priv->dev, "fsl_elbc_init: nand->badblockpos = %d\n", chip->badblockpos); dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_shift = %d\n", chip->chip_shift); dev_dbg(priv->dev, "fsl_elbc_init: nand->page_shift = %d\n", chip->page_shift); dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n", chip->phys_erase_shift); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecclayout = %p\n", chip->ecclayout); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n", chip->ecc.mode); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n", chip->ecc.steps); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n", chip->ecc.bytes); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n", chip->ecc.total); dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n", chip->ecc.layout); dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags); dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size); dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n", mtd->erasesize); dev_dbg(priv->dev, "fsl_elbc_init: mtd->writesize = %d\n", mtd->writesize); dev_dbg(priv->dev, "fsl_elbc_init: mtd->oobsize = %d\n", mtd->oobsize); /* adjust Option Register and ECC to match Flash page size */ if (mtd->writesize == 512) { priv->page_size = 0; clrbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS); } else if (mtd->writesize == 2048) { priv->page_size = 1; setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS); /* adjust ecc setup if needed */ if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) == BR_DECC_CHK_GEN) { chip->ecc.size = 512; chip->ecc.layout = (priv->fmr & FMR_ECCM) ? &fsl_elbc_oob_lp_eccm1 : &fsl_elbc_oob_lp_eccm0; chip->badblock_pattern = &largepage_memorybased; } } else { dev_err(priv->dev, "fsl_elbc_init: page size %d is not supported\n", mtd->writesize); return -1; } return 0; } static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_lbc_ctrl *ctrl = priv->ctrl; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand; fsl_elbc_read_buf(mtd, buf, mtd->writesize); if (oob_required) fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize); if (fsl_elbc_wait(mtd, chip) & NAND_STATUS_FAIL) mtd->ecc_stats.failed++; return elbc_fcm_ctrl->max_bitflips; } /* ECC will be calculated automatically, and errors will be detected in * waitfunc. */ static void fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { fsl_elbc_write_buf(mtd, buf, mtd->writesize); fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize); } static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) { struct fsl_lbc_ctrl *ctrl = priv->ctrl; struct fsl_lbc_regs __iomem *lbc = ctrl->regs; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand; struct nand_chip *chip = &priv->chip; dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank); /* Fill in fsl_elbc_mtd structure */ priv->mtd.priv = chip; priv->mtd.owner = THIS_MODULE; /* set timeout to maximum */ priv->fmr = 15 << FMR_CWTO_SHIFT; if (in_be32(&lbc->bank[priv->bank].or) & OR_FCM_PGS) priv->fmr |= FMR_ECCM; /* fill in nand_chip structure */ /* set up function call table */ chip->read_byte = fsl_elbc_read_byte; chip->write_buf = fsl_elbc_write_buf; chip->read_buf = fsl_elbc_read_buf; chip->verify_buf = fsl_elbc_verify_buf; chip->select_chip = fsl_elbc_select_chip; chip->cmdfunc = fsl_elbc_cmdfunc; chip->waitfunc = fsl_elbc_wait; chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; /* set up nand options */ chip->bbt_options = NAND_BBT_USE_FLASH; chip->controller = &elbc_fcm_ctrl->controller; chip->priv = priv; chip->ecc.read_page = fsl_elbc_read_page; chip->ecc.write_page = fsl_elbc_write_page; /* If CS Base Register selects full hardware ECC then use it */ if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) == BR_DECC_CHK_GEN) { chip->ecc.mode = NAND_ECC_HW; /* put in small page settings and adjust later if needed */ chip->ecc.layout = (priv->fmr & FMR_ECCM) ? &fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0; chip->ecc.size = 512; chip->ecc.bytes = 3; chip->ecc.strength = 1; } else { /* otherwise fall back to default software ECC */ chip->ecc.mode = NAND_ECC_SOFT; } return 0; } static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv) { struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand; nand_release(&priv->mtd); kfree(priv->mtd.name); if (priv->vbase) iounmap(priv->vbase); elbc_fcm_ctrl->chips[priv->bank] = NULL; kfree(priv); return 0; } static DEFINE_MUTEX(fsl_elbc_nand_mutex); static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev) { struct fsl_lbc_regs __iomem *lbc; struct fsl_elbc_mtd *priv; struct resource res; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl; static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ofpart", NULL }; int ret; int bank; struct device *dev; struct device_node *node = pdev->dev.of_node; struct mtd_part_parser_data ppdata; ppdata.of_node = pdev->dev.of_node; if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs) return -ENODEV; lbc = fsl_lbc_ctrl_dev->regs; dev = fsl_lbc_ctrl_dev->dev; /* get, allocate and map the memory resource */ ret = of_address_to_resource(node, 0, &res); if (ret) { dev_err(dev, "failed to get resource\n"); return ret; } /* find which chip select it is connected to */ for (bank = 0; bank < MAX_BANKS; bank++) if ((in_be32(&lbc->bank[bank].br) & BR_V) && (in_be32(&lbc->bank[bank].br) & BR_MSEL) == BR_MS_FCM && (in_be32(&lbc->bank[bank].br) & in_be32(&lbc->bank[bank].or) & BR_BA) == fsl_lbc_addr(res.start)) break; if (bank >= MAX_BANKS) { dev_err(dev, "address did not match any chip selects\n"); return -ENODEV; } priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; mutex_lock(&fsl_elbc_nand_mutex); if (!fsl_lbc_ctrl_dev->nand) { elbc_fcm_ctrl = kzalloc(sizeof(*elbc_fcm_ctrl), GFP_KERNEL); if (!elbc_fcm_ctrl) { dev_err(dev, "failed to allocate memory\n"); mutex_unlock(&fsl_elbc_nand_mutex); ret = -ENOMEM; goto err; } elbc_fcm_ctrl->counter++; spin_lock_init(&elbc_fcm_ctrl->controller.lock); init_waitqueue_head(&elbc_fcm_ctrl->controller.wq); fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl; } else { elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand; } mutex_unlock(&fsl_elbc_nand_mutex); elbc_fcm_ctrl->chips[bank] = priv; priv->bank = bank; priv->ctrl = fsl_lbc_ctrl_dev; priv->dev = &pdev->dev; dev_set_drvdata(priv->dev, priv); priv->vbase = ioremap(res.start, resource_size(&res)); if (!priv->vbase) { dev_err(dev, "failed to map chip region\n"); ret = -ENOMEM; goto err; } priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start); if (!priv->mtd.name) { ret = -ENOMEM; goto err; } ret = fsl_elbc_chip_init(priv); if (ret) goto err; ret = nand_scan_ident(&priv->mtd, 1, NULL); if (ret) goto err; ret = fsl_elbc_chip_init_tail(&priv->mtd); if (ret) goto err; ret = nand_scan_tail(&priv->mtd); if (ret) goto err; /* First look for RedBoot table or partitions on the command * line, these take precedence over device tree information */ mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata, NULL, 0); printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n", (unsigned long long)res.start, priv->bank); return 0; err: fsl_elbc_chip_remove(priv); return ret; } static int fsl_elbc_nand_remove(struct platform_device *pdev) { struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand; struct fsl_elbc_mtd *priv = dev_get_drvdata(&pdev->dev); fsl_elbc_chip_remove(priv); mutex_lock(&fsl_elbc_nand_mutex); elbc_fcm_ctrl->counter--; if (!elbc_fcm_ctrl->counter) { fsl_lbc_ctrl_dev->nand = NULL; kfree(elbc_fcm_ctrl); } mutex_unlock(&fsl_elbc_nand_mutex); return 0; } static const struct of_device_id fsl_elbc_nand_match[] = { { .compatible = "fsl,elbc-fcm-nand", }, {} }; static struct platform_driver fsl_elbc_nand_driver = { .driver = { .name = "fsl,elbc-fcm-nand", .owner = THIS_MODULE, .of_match_table = fsl_elbc_nand_match, }, .probe = fsl_elbc_nand_probe, .remove = fsl_elbc_nand_remove, }; module_platform_driver(fsl_elbc_nand_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Freescale"); MODULE_DESCRIPTION("Freescale Enhanced Local Bus Controller MTD NAND driver");