# SPDX-License-Identifier: GPL-2.0-only # # ARM CPU Frequency scaling drivers # config ACPI_CPPC_CPUFREQ tristate "CPUFreq driver based on the ACPI CPPC spec" depends on ACPI_PROCESSOR select ACPI_CPPC_LIB help This adds a CPUFreq driver which uses CPPC methods as described in the ACPIv5.1 spec. CPPC stands for Collaborative Processor Performance Controls. It is based on an abstract continuous scale of CPU performance values which allows the remote power processor to flexibly optimize for power and performance. CPPC relies on power management firmware support for its operation. If in doubt, say N. config ARM_ARMADA_37XX_CPUFREQ tristate "Armada 37xx CPUFreq support" depends on ARCH_MVEBU && CPUFREQ_DT help This adds the CPUFreq driver support for Marvell Armada 37xx SoCs. The Armada 37xx PMU supports 4 frequency and VDD levels. config ARM_ARMADA_8K_CPUFREQ tristate "Armada 8K CPUFreq driver" depends on ARCH_MVEBU && CPUFREQ_DT help This enables the CPUFreq driver support for Marvell Armada8k SOCs. Armada8K device has the AP806 which supports scaling to any full integer divider. If in doubt, say N. # big LITTLE core layer and glue drivers config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver" depends on ARM_CPU_TOPOLOGY && HAVE_CLK select PM_OPP help This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. config ARM_SCPI_CPUFREQ tristate "SCPI based CPUfreq driver" depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI help This adds the CPUfreq driver support for ARM platforms using SCPI protocol for CPU power management. This driver uses SCPI Message Protocol driver to interact with the firmware providing the CPU DVFS functionality. config ARM_VEXPRESS_SPC_CPUFREQ tristate "Versatile Express SPC based CPUfreq driver" depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC help This add the CPUfreq driver support for Versatile Express big.LITTLE platforms using SPC for power management. config ARM_BRCMSTB_AVS_CPUFREQ tristate "Broadcom STB AVS CPUfreq driver" depends on ARCH_BRCMSTB || COMPILE_TEST default y help Some Broadcom STB SoCs use a co-processor running proprietary firmware ("AVS") to handle voltage and frequency scaling. This driver provides a standard CPUfreq interface to to the firmware. Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS. config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR default m help This adds the CPUFreq driver for Calxeda Highbank SoC based boards. If in doubt, say N. config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6 cpufreq support" depends on ARCH_MXC depends on REGULATOR_ANATOP select PM_OPP help This adds cpufreq driver support for Freescale i.MX6 series SoCs. If in doubt, say N. config ARM_IMX_CPUFREQ_DT tristate "Freescale i.MX8M cpufreq support" depends on ARCH_MXC && CPUFREQ_DT help This adds cpufreq driver support for Freescale i.MX8M series SoCs, based on cpufreq-dt. If in doubt, say N. config ARM_KIRKWOOD_CPUFREQ def_bool MACH_KIRKWOOD help This adds the CPUFreq driver for Marvell Kirkwood SoCs. config ARM_MEDIATEK_CPUFREQ tristate "CPU Frequency scaling support for MediaTek SoCs" depends on ARCH_MEDIATEK && REGULATOR select PM_OPP help This adds the CPUFreq driver support for MediaTek SoCs. config ARM_OMAP2PLUS_CPUFREQ bool "TI OMAP2+" depends on ARCH_OMAP2PLUS default ARCH_OMAP2PLUS config ARM_QCOM_CPUFREQ_NVMEM tristate "Qualcomm nvmem based CPUFreq" depends on ARM64 depends on QCOM_QFPROM depends on QCOM_SMEM select PM_OPP help This adds the CPUFreq driver for Qualcomm Kryo SoC based boards. If in doubt, say N. config ARM_QCOM_CPUFREQ_HW tristate "QCOM CPUFreq HW driver" depends on ARCH_QCOM || COMPILE_TEST help Support for the CPUFreq HW driver. Some QCOM chipsets have a HW engine to offload the steps necessary for changing the frequency of the CPUs. Firmware loaded in this engine exposes a programming interface to the OS. The driver implements the cpufreq interface for this HW engine. Say Y if you want to support CPUFreq HW. config ARM_RASPBERRYPI_CPUFREQ tristate "Raspberry Pi cpufreq support" depends on CLK_RASPBERRYPI || COMPILE_TEST help This adds the CPUFreq driver for Raspberry Pi If in doubt, say N. config ARM_S3C_CPUFREQ bool help Internal configuration node for common cpufreq on Samsung SoC config ARM_S3C24XX_CPUFREQ bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" depends on ARCH_S3C24XX select ARM_S3C_CPUFREQ help This enables the CPUfreq driver for the Samsung S3C24XX family of CPUs. For details, take a look at <file:Documentation/cpu-freq>. If in doubt, say N. config ARM_S3C24XX_CPUFREQ_DEBUG bool "Debug CPUfreq Samsung driver core" depends on ARM_S3C24XX_CPUFREQ help Enable s3c_freq_dbg for the Samsung S3C CPUfreq core config ARM_S3C24XX_CPUFREQ_IODEBUG bool "Debug CPUfreq Samsung driver IO timing" depends on ARM_S3C24XX_CPUFREQ help Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core config ARM_S3C24XX_CPUFREQ_DEBUGFS bool "Export debugfs for CPUFreq" depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS help Export status information via debugfs. config ARM_S3C2410_CPUFREQ bool depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 select S3C2410_CPUFREQ_UTILS help CPU Frequency scaling support for S3C2410 config ARM_S3C2412_CPUFREQ bool depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 default y select S3C2412_IOTIMING help CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. config ARM_S3C2416_CPUFREQ bool "S3C2416 CPU Frequency scaling support" depends on CPU_S3C2416 help This adds the CPUFreq driver for the Samsung S3C2416 and S3C2450 SoC. The S3C2416 supports changing the rate of the armdiv clock source and also entering a so called dynamic voltage scaling mode in which it is possible to reduce the core voltage of the CPU. If in doubt, say N. config ARM_S3C2416_CPUFREQ_VCORESCALE bool "Allow voltage scaling for S3C2416 arm core" depends on ARM_S3C2416_CPUFREQ && REGULATOR help Enable CPU voltage scaling when entering the dvs mode. It uses information gathered through existing hardware and tests but not documented in any datasheet. If in doubt, say N. config ARM_S3C2440_CPUFREQ bool "S3C2440/S3C2442 CPU Frequency scaling support" depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) select S3C2410_CPUFREQ_UTILS default y help CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" depends on CPU_S3C6410 default y help This adds the CPUFreq driver for Samsung S3C6410 SoC. If in doubt, say N. config ARM_S5PV210_CPUFREQ bool "Samsung S5PV210 and S5PC110" depends on CPU_S5PV210 default y help This adds the CPUFreq driver for Samsung S5PV210 and S5PC110 SoCs. If in doubt, say N. config ARM_SA1100_CPUFREQ bool config ARM_SA1110_CPUFREQ bool config ARM_SCMI_CPUFREQ tristate "SCMI based CPUfreq driver" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST select PM_OPP help This adds the CPUfreq driver support for ARM platforms using SCMI protocol for CPU power management. This driver uses SCMI Message Protocol driver to interact with the firmware providing the CPU DVFS functionality. config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR default y help This adds the CPUFreq driver support for SPEAr SOCs. config ARM_STI_CPUFREQ tristate "STi CPUFreq support" depends on SOC_STIH407 help This driver uses the generic OPP framework to match the running platform with a predefined set of suitable values. If not provided we will fall-back so safe-values contained in Device Tree. Enable this config option if you wish to add CPUFreq support for STi based SoCs. config ARM_TANGO_CPUFREQ bool depends on CPUFREQ_DT && ARCH_TANGO default y config ARM_TEGRA20_CPUFREQ tristate "Tegra20 CPUFreq support" depends on ARCH_TEGRA default y help This adds the CPUFreq driver support for Tegra20 SOCs. config ARM_TEGRA124_CPUFREQ bool "Tegra124 CPUFreq support" depends on ARCH_TEGRA && CPUFREQ_DT default y help This adds the CPUFreq driver support for Tegra124 SOCs. config ARM_TEGRA186_CPUFREQ tristate "Tegra186 CPUFreq support" depends on ARCH_TEGRA && TEGRA_BPMP help This adds the CPUFreq driver support for Tegra186 SOCs. config ARM_TI_CPUFREQ bool "Texas Instruments CPUFreq support" depends on ARCH_OMAP2PLUS help This driver enables valid OPPs on the running platform based on values contained within the SoC in use. Enable this in order to use the cpufreq-dt driver on all Texas Instruments platforms that provide dt based operating-points-v2 tables with opp-supported-hw data provided. Required for cpufreq support on AM335x, AM437x, DRA7x, and AM57x platforms. config ARM_PXA2xx_CPUFREQ tristate "Intel PXA2xx CPUfreq driver" depends on PXA27x || PXA25x help This add the CPUFreq driver support for Intel PXA2xx SOCs. If in doubt, say N.