// SPDX-License-Identifier: GPL-2.0-only /* Copyright(c) 2020 Intel Corporation. All rights reserved. */ #include #include #include #include #include #include #include "core.h" static bool cxl_raw_allow_all; /** * DOC: cxl mbox * * Core implementation of the CXL 2.0 Type-3 Memory Device Mailbox. The * implementation is used by the cxl_pci driver to initialize the device * and implement the cxl_mem.h IOCTL UAPI. It also implements the * backend of the cxl_pmem_ctl() transport for LIBNVDIMM. */ #define cxl_for_each_cmd(cmd) \ for ((cmd) = &cxl_mem_commands[0]; \ ((cmd) - cxl_mem_commands) < ARRAY_SIZE(cxl_mem_commands); (cmd)++) #define CXL_CMD(_id, sin, sout, _flags) \ [CXL_MEM_COMMAND_ID_##_id] = { \ .info = { \ .id = CXL_MEM_COMMAND_ID_##_id, \ .size_in = sin, \ .size_out = sout, \ }, \ .opcode = CXL_MBOX_OP_##_id, \ .flags = _flags, \ } /* * This table defines the supported mailbox commands for the driver. This table * is made up of a UAPI structure. Non-negative values as parameters in the * table will be validated against the user's input. For example, if size_in is * 0, and the user passed in 1, it is an error. */ static struct cxl_mem_command cxl_mem_commands[CXL_MEM_COMMAND_ID_MAX] = { CXL_CMD(IDENTIFY, 0, 0x43, CXL_CMD_FLAG_FORCE_ENABLE), #ifdef CONFIG_CXL_MEM_RAW_COMMANDS CXL_CMD(RAW, ~0, ~0, 0), #endif CXL_CMD(GET_SUPPORTED_LOGS, 0, ~0, CXL_CMD_FLAG_FORCE_ENABLE), CXL_CMD(GET_FW_INFO, 0, 0x50, 0), CXL_CMD(GET_PARTITION_INFO, 0, 0x20, 0), CXL_CMD(GET_LSA, 0x8, ~0, 0), CXL_CMD(GET_HEALTH_INFO, 0, 0x12, 0), CXL_CMD(GET_LOG, 0x18, ~0, CXL_CMD_FLAG_FORCE_ENABLE), CXL_CMD(SET_PARTITION_INFO, 0x0a, 0, 0), CXL_CMD(SET_LSA, ~0, 0, 0), CXL_CMD(GET_ALERT_CONFIG, 0, 0x10, 0), CXL_CMD(SET_ALERT_CONFIG, 0xc, 0, 0), CXL_CMD(GET_SHUTDOWN_STATE, 0, 0x1, 0), CXL_CMD(SET_SHUTDOWN_STATE, 0x1, 0, 0), CXL_CMD(GET_POISON, 0x10, ~0, 0), CXL_CMD(INJECT_POISON, 0x8, 0, 0), CXL_CMD(CLEAR_POISON, 0x48, 0, 0), CXL_CMD(GET_SCAN_MEDIA_CAPS, 0x10, 0x4, 0), CXL_CMD(SCAN_MEDIA, 0x11, 0, 0), CXL_CMD(GET_SCAN_MEDIA, 0, ~0, 0), }; /* * Commands that RAW doesn't permit. The rationale for each: * * CXL_MBOX_OP_ACTIVATE_FW: Firmware activation requires adjustment / * coordination of transaction timeout values at the root bridge level. * * CXL_MBOX_OP_SET_PARTITION_INFO: The device memory map may change live * and needs to be coordinated with HDM updates. * * CXL_MBOX_OP_SET_LSA: The label storage area may be cached by the * driver and any writes from userspace invalidates those contents. * * CXL_MBOX_OP_SET_SHUTDOWN_STATE: Set shutdown state assumes no writes * to the device after it is marked clean, userspace can not make that * assertion. * * CXL_MBOX_OP_[GET_]SCAN_MEDIA: The kernel provides a native error list that * is kept up to date with patrol notifications and error management. */ static u16 cxl_disabled_raw_commands[] = { CXL_MBOX_OP_ACTIVATE_FW, CXL_MBOX_OP_SET_PARTITION_INFO, CXL_MBOX_OP_SET_LSA, CXL_MBOX_OP_SET_SHUTDOWN_STATE, CXL_MBOX_OP_SCAN_MEDIA, CXL_MBOX_OP_GET_SCAN_MEDIA, }; /* * Command sets that RAW doesn't permit. All opcodes in this set are * disabled because they pass plain text security payloads over the * user/kernel boundary. This functionality is intended to be wrapped * behind the keys ABI which allows for encrypted payloads in the UAPI */ static u8 security_command_sets[] = { 0x44, /* Sanitize */ 0x45, /* Persistent Memory Data-at-rest Security */ 0x46, /* Security Passthrough */ }; static bool cxl_is_security_command(u16 opcode) { int i; for (i = 0; i < ARRAY_SIZE(security_command_sets); i++) if (security_command_sets[i] == (opcode >> 8)) return true; return false; } static struct cxl_mem_command *cxl_mem_find_command(u16 opcode) { struct cxl_mem_command *c; cxl_for_each_cmd(c) if (c->opcode == opcode) return c; return NULL; } /** * cxl_mbox_send_cmd() - Send a mailbox command to a device. * @cxlds: The device data for the operation * @opcode: Opcode for the mailbox command. * @in: The input payload for the mailbox command. * @in_size: The length of the input payload * @out: Caller allocated buffer for the output. * @out_size: Expected size of output. * * Context: Any context. Will acquire and release mbox_mutex. * Return: * * %>=0 - Number of bytes returned in @out. * * %-E2BIG - Payload is too large for hardware. * * %-EBUSY - Couldn't acquire exclusive mailbox access. * * %-EFAULT - Hardware error occurred. * * %-ENXIO - Command completed, but device reported an error. * * %-EIO - Unexpected output size. * * Mailbox commands may execute successfully yet the device itself reported an * error. While this distinction can be useful for commands from userspace, the * kernel will only be able to use results when both are successful. */ int cxl_mbox_send_cmd(struct cxl_dev_state *cxlds, u16 opcode, void *in, size_t in_size, void *out, size_t out_size) { const struct cxl_mem_command *cmd = cxl_mem_find_command(opcode); struct cxl_mbox_cmd mbox_cmd = { .opcode = opcode, .payload_in = in, .size_in = in_size, .size_out = out_size, .payload_out = out, }; int rc; if (out_size > cxlds->payload_size) return -E2BIG; rc = cxlds->mbox_send(cxlds, &mbox_cmd); if (rc) return rc; /* TODO: Map return code to proper kernel style errno */ if (mbox_cmd.return_code != CXL_MBOX_SUCCESS) return -ENXIO; /* * Variable sized commands can't be validated and so it's up to the * caller to do that if they wish. */ if (cmd->info.size_out >= 0 && mbox_cmd.size_out != out_size) return -EIO; return 0; } EXPORT_SYMBOL_NS_GPL(cxl_mbox_send_cmd, CXL); static bool cxl_mem_raw_command_allowed(u16 opcode) { int i; if (!IS_ENABLED(CONFIG_CXL_MEM_RAW_COMMANDS)) return false; if (security_locked_down(LOCKDOWN_PCI_ACCESS)) return false; if (cxl_raw_allow_all) return true; if (cxl_is_security_command(opcode)) return false; for (i = 0; i < ARRAY_SIZE(cxl_disabled_raw_commands); i++) if (cxl_disabled_raw_commands[i] == opcode) return false; return true; } static int cxl_to_mem_cmd_raw(struct cxl_mem_command *mem_cmd, const struct cxl_send_command *send_cmd, struct cxl_dev_state *cxlds) { if (send_cmd->raw.rsvd) return -EINVAL; /* * Unlike supported commands, the output size of RAW commands * gets passed along without further checking, so it must be * validated here. */ if (send_cmd->out.size > cxlds->payload_size) return -EINVAL; if (!cxl_mem_raw_command_allowed(send_cmd->raw.opcode)) return -EPERM; dev_WARN_ONCE(cxlds->dev, true, "raw command path used\n"); *mem_cmd = (struct cxl_mem_command) { .info = { .id = CXL_MEM_COMMAND_ID_RAW, .size_in = send_cmd->in.size, .size_out = send_cmd->out.size, }, .opcode = send_cmd->raw.opcode }; return 0; } static int cxl_to_mem_cmd(struct cxl_mem_command *mem_cmd, const struct cxl_send_command *send_cmd, struct cxl_dev_state *cxlds) { struct cxl_mem_command *c = &cxl_mem_commands[send_cmd->id]; const struct cxl_command_info *info = &c->info; if (send_cmd->flags & ~CXL_MEM_COMMAND_FLAG_MASK) return -EINVAL; if (send_cmd->rsvd) return -EINVAL; if (send_cmd->in.rsvd || send_cmd->out.rsvd) return -EINVAL; /* Check that the command is enabled for hardware */ if (!test_bit(info->id, cxlds->enabled_cmds)) return -ENOTTY; /* Check that the command is not claimed for exclusive kernel use */ if (test_bit(info->id, cxlds->exclusive_cmds)) return -EBUSY; /* Check the input buffer is the expected size */ if (info->size_in >= 0 && info->size_in != send_cmd->in.size) return -ENOMEM; /* Check the output buffer is at least large enough */ if (info->size_out >= 0 && send_cmd->out.size < info->size_out) return -ENOMEM; *mem_cmd = (struct cxl_mem_command) { .info = { .id = info->id, .flags = info->flags, .size_in = send_cmd->in.size, .size_out = send_cmd->out.size, }, .opcode = c->opcode }; return 0; } /** * cxl_validate_cmd_from_user() - Check fields for CXL_MEM_SEND_COMMAND. * @cxlds: The device data for the operation * @send_cmd: &struct cxl_send_command copied in from userspace. * @out_cmd: Sanitized and populated &struct cxl_mem_command. * * Return: * * %0 - @out_cmd is ready to send. * * %-ENOTTY - Invalid command specified. * * %-EINVAL - Reserved fields or invalid values were used. * * %-ENOMEM - Input or output buffer wasn't sized properly. * * %-EPERM - Attempted to use a protected command. * * %-EBUSY - Kernel has claimed exclusive access to this opcode * * The result of this command is a fully validated command in @out_cmd that is * safe to send to the hardware. * * See handle_mailbox_cmd_from_user() */ static int cxl_validate_cmd_from_user(struct cxl_dev_state *cxlds, const struct cxl_send_command *send_cmd, struct cxl_mem_command *out_cmd) { if (send_cmd->id == 0 || send_cmd->id >= CXL_MEM_COMMAND_ID_MAX) return -ENOTTY; /* * The user can never specify an input payload larger than what hardware * supports, but output can be arbitrarily large (simply write out as * much data as the hardware provides). */ if (send_cmd->in.size > cxlds->payload_size) return -EINVAL; /* Sanitize and construct a cxl_mem_command */ if (send_cmd->id == CXL_MEM_COMMAND_ID_RAW) return cxl_to_mem_cmd_raw(out_cmd, send_cmd, cxlds); else return cxl_to_mem_cmd(out_cmd, send_cmd, cxlds); } int cxl_query_cmd(struct cxl_memdev *cxlmd, struct cxl_mem_query_commands __user *q) { struct device *dev = &cxlmd->dev; struct cxl_mem_command *cmd; u32 n_commands; int j = 0; dev_dbg(dev, "Query IOCTL\n"); if (get_user(n_commands, &q->n_commands)) return -EFAULT; /* returns the total number if 0 elements are requested. */ if (n_commands == 0) return put_user(ARRAY_SIZE(cxl_mem_commands), &q->n_commands); /* * otherwise, return max(n_commands, total commands) cxl_command_info * structures. */ cxl_for_each_cmd(cmd) { const struct cxl_command_info *info = &cmd->info; if (copy_to_user(&q->commands[j++], info, sizeof(*info))) return -EFAULT; if (j == n_commands) break; } return 0; } /** * handle_mailbox_cmd_from_user() - Dispatch a mailbox command for userspace. * @cxlds: The device data for the operation * @cmd: The validated command. * @in_payload: Pointer to userspace's input payload. * @out_payload: Pointer to userspace's output payload. * @size_out: (Input) Max payload size to copy out. * (Output) Payload size hardware generated. * @retval: Hardware generated return code from the operation. * * Return: * * %0 - Mailbox transaction succeeded. This implies the mailbox * protocol completed successfully not that the operation itself * was successful. * * %-ENOMEM - Couldn't allocate a bounce buffer. * * %-EFAULT - Something happened with copy_to/from_user. * * %-EINTR - Mailbox acquisition interrupted. * * %-EXXX - Transaction level failures. * * Creates the appropriate mailbox command and dispatches it on behalf of a * userspace request. The input and output payloads are copied between * userspace. * * See cxl_send_cmd(). */ static int handle_mailbox_cmd_from_user(struct cxl_dev_state *cxlds, const struct cxl_mem_command *cmd, u64 in_payload, u64 out_payload, s32 *size_out, u32 *retval) { struct device *dev = cxlds->dev; struct cxl_mbox_cmd mbox_cmd = { .opcode = cmd->opcode, .size_in = cmd->info.size_in, .size_out = cmd->info.size_out, }; int rc; if (cmd->info.size_out) { mbox_cmd.payload_out = kvzalloc(cmd->info.size_out, GFP_KERNEL); if (!mbox_cmd.payload_out) return -ENOMEM; } if (cmd->info.size_in) { mbox_cmd.payload_in = vmemdup_user(u64_to_user_ptr(in_payload), cmd->info.size_in); if (IS_ERR(mbox_cmd.payload_in)) { kvfree(mbox_cmd.payload_out); return PTR_ERR(mbox_cmd.payload_in); } } dev_dbg(dev, "Submitting %s command for user\n" "\topcode: %x\n" "\tsize: %ub\n", cxl_command_names[cmd->info.id].name, mbox_cmd.opcode, cmd->info.size_in); rc = cxlds->mbox_send(cxlds, &mbox_cmd); if (rc) goto out; /* * @size_out contains the max size that's allowed to be written back out * to userspace. While the payload may have written more output than * this it will have to be ignored. */ if (mbox_cmd.size_out) { dev_WARN_ONCE(dev, mbox_cmd.size_out > *size_out, "Invalid return size\n"); if (copy_to_user(u64_to_user_ptr(out_payload), mbox_cmd.payload_out, mbox_cmd.size_out)) { rc = -EFAULT; goto out; } } *size_out = mbox_cmd.size_out; *retval = mbox_cmd.return_code; out: kvfree(mbox_cmd.payload_in); kvfree(mbox_cmd.payload_out); return rc; } int cxl_send_cmd(struct cxl_memdev *cxlmd, struct cxl_send_command __user *s) { struct cxl_dev_state *cxlds = cxlmd->cxlds; struct device *dev = &cxlmd->dev; struct cxl_send_command send; struct cxl_mem_command c; int rc; dev_dbg(dev, "Send IOCTL\n"); if (copy_from_user(&send, s, sizeof(send))) return -EFAULT; rc = cxl_validate_cmd_from_user(cxlmd->cxlds, &send, &c); if (rc) return rc; /* Prepare to handle a full payload for variable sized output */ if (c.info.size_out < 0) c.info.size_out = cxlds->payload_size; rc = handle_mailbox_cmd_from_user(cxlds, &c, send.in.payload, send.out.payload, &send.out.size, &send.retval); if (rc) return rc; if (copy_to_user(s, &send, sizeof(send))) return -EFAULT; return 0; } static int cxl_xfer_log(struct cxl_dev_state *cxlds, uuid_t *uuid, u32 size, u8 *out) { u32 remaining = size; u32 offset = 0; while (remaining) { u32 xfer_size = min_t(u32, remaining, cxlds->payload_size); struct cxl_mbox_get_log log = { .uuid = *uuid, .offset = cpu_to_le32(offset), .length = cpu_to_le32(xfer_size) }; int rc; rc = cxl_mbox_send_cmd(cxlds, CXL_MBOX_OP_GET_LOG, &log, sizeof(log), out, xfer_size); if (rc < 0) return rc; out += xfer_size; remaining -= xfer_size; offset += xfer_size; } return 0; } /** * cxl_walk_cel() - Walk through the Command Effects Log. * @cxlds: The device data for the operation * @size: Length of the Command Effects Log. * @cel: CEL * * Iterate over each entry in the CEL and determine if the driver supports the * command. If so, the command is enabled for the device and can be used later. */ static void cxl_walk_cel(struct cxl_dev_state *cxlds, size_t size, u8 *cel) { struct cxl_cel_entry *cel_entry; const int cel_entries = size / sizeof(*cel_entry); int i; cel_entry = (struct cxl_cel_entry *) cel; for (i = 0; i < cel_entries; i++) { u16 opcode = le16_to_cpu(cel_entry[i].opcode); struct cxl_mem_command *cmd = cxl_mem_find_command(opcode); if (!cmd) { dev_dbg(cxlds->dev, "Opcode 0x%04x unsupported by driver", opcode); continue; } set_bit(cmd->info.id, cxlds->enabled_cmds); } } static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_dev_state *cxlds) { struct cxl_mbox_get_supported_logs *ret; int rc; ret = kvmalloc(cxlds->payload_size, GFP_KERNEL); if (!ret) return ERR_PTR(-ENOMEM); rc = cxl_mbox_send_cmd(cxlds, CXL_MBOX_OP_GET_SUPPORTED_LOGS, NULL, 0, ret, cxlds->payload_size); if (rc < 0) { kvfree(ret); return ERR_PTR(rc); } return ret; } enum { CEL_UUID, VENDOR_DEBUG_UUID, }; /* See CXL 2.0 Table 170. Get Log Input Payload */ static const uuid_t log_uuid[] = { [CEL_UUID] = DEFINE_CXL_CEL_UUID, [VENDOR_DEBUG_UUID] = DEFINE_CXL_VENDOR_DEBUG_UUID, }; /** * cxl_enumerate_cmds() - Enumerate commands for a device. * @cxlds: The device data for the operation * * Returns 0 if enumerate completed successfully. * * CXL devices have optional support for certain commands. This function will * determine the set of supported commands for the hardware and update the * enabled_cmds bitmap in the @cxlds. */ int cxl_enumerate_cmds(struct cxl_dev_state *cxlds) { struct cxl_mbox_get_supported_logs *gsl; struct device *dev = cxlds->dev; struct cxl_mem_command *cmd; int i, rc; gsl = cxl_get_gsl(cxlds); if (IS_ERR(gsl)) return PTR_ERR(gsl); rc = -ENOENT; for (i = 0; i < le16_to_cpu(gsl->entries); i++) { u32 size = le32_to_cpu(gsl->entry[i].size); uuid_t uuid = gsl->entry[i].uuid; u8 *log; dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size); if (!uuid_equal(&uuid, &log_uuid[CEL_UUID])) continue; log = kvmalloc(size, GFP_KERNEL); if (!log) { rc = -ENOMEM; goto out; } rc = cxl_xfer_log(cxlds, &uuid, size, log); if (rc) { kvfree(log); goto out; } cxl_walk_cel(cxlds, size, log); kvfree(log); /* In case CEL was bogus, enable some default commands. */ cxl_for_each_cmd(cmd) if (cmd->flags & CXL_CMD_FLAG_FORCE_ENABLE) set_bit(cmd->info.id, cxlds->enabled_cmds); /* Found the required CEL */ rc = 0; } out: kvfree(gsl); return rc; } EXPORT_SYMBOL_NS_GPL(cxl_enumerate_cmds, CXL); /** * cxl_mem_get_partition_info - Get partition info * @cxlds: The device data for the operation * * Retrieve the current partition info for the device specified. The active * values are the current capacity in bytes. If not 0, the 'next' values are * the pending values, in bytes, which take affect on next cold reset. * * Return: 0 if no error: or the result of the mailbox command. * * See CXL @8.2.9.5.2.1 Get Partition Info */ static int cxl_mem_get_partition_info(struct cxl_dev_state *cxlds) { struct cxl_mbox_get_partition_info { __le64 active_volatile_cap; __le64 active_persistent_cap; __le64 next_volatile_cap; __le64 next_persistent_cap; } __packed pi; int rc; rc = cxl_mbox_send_cmd(cxlds, CXL_MBOX_OP_GET_PARTITION_INFO, NULL, 0, &pi, sizeof(pi)); if (rc) return rc; cxlds->active_volatile_bytes = le64_to_cpu(pi.active_volatile_cap) * CXL_CAPACITY_MULTIPLIER; cxlds->active_persistent_bytes = le64_to_cpu(pi.active_persistent_cap) * CXL_CAPACITY_MULTIPLIER; cxlds->next_volatile_bytes = le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER; cxlds->next_persistent_bytes = le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER; return 0; } /** * cxl_dev_state_identify() - Send the IDENTIFY command to the device. * @cxlds: The device data for the operation * * Return: 0 if identify was executed successfully. * * This will dispatch the identify command to the device and on success populate * structures to be exported to sysfs. */ int cxl_dev_state_identify(struct cxl_dev_state *cxlds) { /* See CXL 2.0 Table 175 Identify Memory Device Output Payload */ struct cxl_mbox_identify id; int rc; rc = cxl_mbox_send_cmd(cxlds, CXL_MBOX_OP_IDENTIFY, NULL, 0, &id, sizeof(id)); if (rc < 0) return rc; cxlds->total_bytes = le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER; cxlds->volatile_only_bytes = le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER; cxlds->persistent_only_bytes = le64_to_cpu(id.persistent_capacity) * CXL_CAPACITY_MULTIPLIER; cxlds->partition_align_bytes = le64_to_cpu(id.partition_align) * CXL_CAPACITY_MULTIPLIER; dev_dbg(cxlds->dev, "Identify Memory Device\n" " total_bytes = %#llx\n" " volatile_only_bytes = %#llx\n" " persistent_only_bytes = %#llx\n" " partition_align_bytes = %#llx\n", cxlds->total_bytes, cxlds->volatile_only_bytes, cxlds->persistent_only_bytes, cxlds->partition_align_bytes); cxlds->lsa_size = le32_to_cpu(id.lsa_size); memcpy(cxlds->firmware_version, id.fw_revision, sizeof(id.fw_revision)); return 0; } EXPORT_SYMBOL_NS_GPL(cxl_dev_state_identify, CXL); int cxl_mem_create_range_info(struct cxl_dev_state *cxlds) { int rc; if (cxlds->partition_align_bytes == 0) { cxlds->ram_range.start = 0; cxlds->ram_range.end = cxlds->volatile_only_bytes - 1; cxlds->pmem_range.start = cxlds->volatile_only_bytes; cxlds->pmem_range.end = cxlds->volatile_only_bytes + cxlds->persistent_only_bytes - 1; return 0; } rc = cxl_mem_get_partition_info(cxlds); if (rc) { dev_err(cxlds->dev, "Failed to query partition information\n"); return rc; } dev_dbg(cxlds->dev, "Get Partition Info\n" " active_volatile_bytes = %#llx\n" " active_persistent_bytes = %#llx\n" " next_volatile_bytes = %#llx\n" " next_persistent_bytes = %#llx\n", cxlds->active_volatile_bytes, cxlds->active_persistent_bytes, cxlds->next_volatile_bytes, cxlds->next_persistent_bytes); cxlds->ram_range.start = 0; cxlds->ram_range.end = cxlds->active_volatile_bytes - 1; cxlds->pmem_range.start = cxlds->active_volatile_bytes; cxlds->pmem_range.end = cxlds->active_volatile_bytes + cxlds->active_persistent_bytes - 1; return 0; } EXPORT_SYMBOL_NS_GPL(cxl_mem_create_range_info, CXL); struct cxl_dev_state *cxl_dev_state_create(struct device *dev) { struct cxl_dev_state *cxlds; cxlds = devm_kzalloc(dev, sizeof(*cxlds), GFP_KERNEL); if (!cxlds) { dev_err(dev, "No memory available\n"); return ERR_PTR(-ENOMEM); } mutex_init(&cxlds->mbox_mutex); cxlds->dev = dev; return cxlds; } EXPORT_SYMBOL_NS_GPL(cxl_dev_state_create, CXL); static struct dentry *cxl_debugfs; void __init cxl_mbox_init(void) { struct dentry *mbox_debugfs; cxl_debugfs = debugfs_create_dir("cxl", NULL); mbox_debugfs = debugfs_create_dir("mbox", cxl_debugfs); debugfs_create_bool("raw_allow_all", 0600, mbox_debugfs, &cxl_raw_allow_all); } void cxl_mbox_exit(void) { debugfs_remove_recursive(cxl_debugfs); }