/* * Realtek RTL28xxU DVB USB driver * * Copyright (C) 2009 Antti Palosaari * Copyright (C) 2011 Antti Palosaari * Copyright (C) 2012 Thomas Mair * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ #include "rtl28xxu.h" #include "rtl2830.h" #include "rtl2832.h" #include "qt1010.h" #include "mt2060.h" #include "mxl5005s.h" #include "fc0012.h" #include "fc0013.h" #include "e4000.h" #include "fc2580.h" #include "tua9001.h" #include "r820t.h" /* * RTL2832_SDR module is in staging. That logic is added in order to avoid any * hard dependency to drivers/staging/ directory as we want compile mainline * driver even whole staging directory is missing. */ #include #if IS_ENABLED(CONFIG_DVB_RTL2832_SDR) struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct rtl2832_config *cfg, struct v4l2_subdev *sd); #else static inline struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, const struct rtl2832_config *cfg, struct v4l2_subdev *sd) { return NULL; } #endif static int rtl28xxu_disable_rc; module_param_named(disable_rc, rtl28xxu_disable_rc, int, 0644); MODULE_PARM_DESC(disable_rc, "disable RTL2832U remote controller"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req) { int ret; unsigned int pipe; u8 requesttype; u8 *buf; buf = kmalloc(req->size, GFP_KERNEL); if (!buf) { ret = -ENOMEM; goto err; } if (req->index & CMD_WR_FLAG) { /* write */ memcpy(buf, req->data, req->size); requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); pipe = usb_sndctrlpipe(d->udev, 0); } else { /* read */ requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); pipe = usb_rcvctrlpipe(d->udev, 0); } ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value, req->index, buf, req->size, 1000); dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value, req->index, buf, req->size); if (ret > 0) ret = 0; /* read request, copy returned data to return buf */ if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) memcpy(req->data, buf, req->size); kfree(buf); if (ret) goto err; return ret; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) { struct rtl28xxu_req req; if (reg < 0x3000) req.index = CMD_USB_WR; else if (reg < 0x4000) req.index = CMD_SYS_WR; else req.index = CMD_IR_WR; req.value = reg; req.size = len; req.data = val; return rtl28xxu_ctrl_msg(d, &req); } static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len) { struct rtl28xxu_req req; if (reg < 0x3000) req.index = CMD_USB_RD; else if (reg < 0x4000) req.index = CMD_SYS_RD; else req.index = CMD_IR_RD; req.value = reg; req.size = len; req.data = val; return rtl28xxu_ctrl_msg(d, &req); } static int rtl28xx_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val) { return rtl28xx_wr_regs(d, reg, &val, 1); } static int rtl28xx_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val) { return rtl2831_rd_regs(d, reg, val, 1); } static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, u8 mask) { int ret; u8 tmp; /* no need for read if whole reg is written */ if (mask != 0xff) { ret = rtl28xx_rd_reg(d, reg, &tmp); if (ret) return ret; val &= mask; tmp &= ~mask; val |= tmp; } return rtl28xx_wr_reg(d, reg, val); } /* I2C */ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { int ret; struct dvb_usb_device *d = i2c_get_adapdata(adap); struct rtl28xxu_priv *priv = d->priv; struct rtl28xxu_req req; /* * It is not known which are real I2C bus xfer limits, but testing * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes. * TODO: find out RTL2832U lens */ /* * I2C adapter logic looks rather complicated due to fact it handles * three different access methods. Those methods are; * 1) integrated demod access * 2) old I2C access * 3) new I2C access * * Used method is selected in order 1, 2, 3. Method 3 can handle all * requests but there is two reasons why not use it always; * 1) It is most expensive, usually two USB messages are needed * 2) At least RTL2831U does not support it * * Method 3 is needed in case of I2C write+read (typical register read) * where write is more than one byte. */ if (mutex_lock_interruptible(&d->i2c_mutex) < 0) return -EAGAIN; if (num == 2 && !(msg[0].flags & I2C_M_RD) && (msg[1].flags & I2C_M_RD)) { if (msg[0].len > 24 || msg[1].len > 24) { /* TODO: check msg[0].len max */ ret = -EOPNOTSUPP; goto err_mutex_unlock; } else if (msg[0].addr == 0x10) { /* method 1 - integrated demod */ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); req.index = CMD_DEMOD_RD | priv->page; req.size = msg[1].len; req.data = &msg[1].buf[0]; ret = rtl28xxu_ctrl_msg(d, &req); } else if (msg[0].len < 2) { /* method 2 - old I2C */ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); req.index = CMD_I2C_RD; req.size = msg[1].len; req.data = &msg[1].buf[0]; ret = rtl28xxu_ctrl_msg(d, &req); } else { /* method 3 - new I2C */ req.value = (msg[0].addr << 1); req.index = CMD_I2C_DA_WR; req.size = msg[0].len; req.data = msg[0].buf; ret = rtl28xxu_ctrl_msg(d, &req); if (ret) goto err_mutex_unlock; req.value = (msg[0].addr << 1); req.index = CMD_I2C_DA_RD; req.size = msg[1].len; req.data = msg[1].buf; ret = rtl28xxu_ctrl_msg(d, &req); } } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) { if (msg[0].len > 22) { /* TODO: check msg[0].len max */ ret = -EOPNOTSUPP; goto err_mutex_unlock; } else if (msg[0].addr == 0x10) { /* method 1 - integrated demod */ if (msg[0].buf[0] == 0x00) { /* save demod page for later demod access */ priv->page = msg[0].buf[1]; ret = 0; } else { req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); req.index = CMD_DEMOD_WR | priv->page; req.size = msg[0].len-1; req.data = &msg[0].buf[1]; ret = rtl28xxu_ctrl_msg(d, &req); } } else if (msg[0].len < 23) { /* method 2 - old I2C */ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); req.index = CMD_I2C_WR; req.size = msg[0].len-1; req.data = &msg[0].buf[1]; ret = rtl28xxu_ctrl_msg(d, &req); } else { /* method 3 - new I2C */ req.value = (msg[0].addr << 1); req.index = CMD_I2C_DA_WR; req.size = msg[0].len; req.data = msg[0].buf; ret = rtl28xxu_ctrl_msg(d, &req); } } else { ret = -EINVAL; } err_mutex_unlock: mutex_unlock(&d->i2c_mutex); return ret ? ret : num; } static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; } static struct i2c_algorithm rtl28xxu_i2c_algo = { .master_xfer = rtl28xxu_i2c_xfer, .functionality = rtl28xxu_i2c_func, }; static int rtl2831u_read_config(struct dvb_usb_device *d) { struct rtl28xxu_priv *priv = d_to_priv(d); int ret; u8 buf[1]; /* open RTL2831U/RTL2830 I2C gate */ struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x08"}; /* tuner probes */ struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf}; dev_dbg(&d->udev->dev, "%s:\n", __func__); /* * RTL2831U GPIOs * ========================================================= * GPIO0 | tuner#0 | 0 off | 1 on | MXL5005S (?) * GPIO2 | LED | 0 off | 1 on | * GPIO4 | tuner#1 | 0 on | 1 off | MT2060 */ /* GPIO direction */ ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a); if (ret) goto err; /* enable as output GPIO0, GPIO2, GPIO4 */ ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15); if (ret) goto err; /* * Probe used tuner. We need to know used tuner before demod attach * since there is some demod params needed to set according to tuner. */ /* demod needs some time to wake up */ msleep(20); priv->tuner_name = "NONE"; /* open demod I2C gate */ ret = rtl28xxu_ctrl_msg(d, &req_gate_open); if (ret) goto err; /* check QT1010 ID(?) register; reg=0f val=2c */ ret = rtl28xxu_ctrl_msg(d, &req_qt1010); if (ret == 0 && buf[0] == 0x2c) { priv->tuner = TUNER_RTL2830_QT1010; priv->tuner_name = "QT1010"; goto found; } /* open demod I2C gate */ ret = rtl28xxu_ctrl_msg(d, &req_gate_open); if (ret) goto err; /* check MT2060 ID register; reg=00 val=63 */ ret = rtl28xxu_ctrl_msg(d, &req_mt2060); if (ret == 0 && buf[0] == 0x63) { priv->tuner = TUNER_RTL2830_MT2060; priv->tuner_name = "MT2060"; goto found; } /* assume MXL5005S */ priv->tuner = TUNER_RTL2830_MXL5005S; priv->tuner_name = "MXL5005S"; goto found; found: dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name); return 0; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl2832u_read_config(struct dvb_usb_device *d) { struct rtl28xxu_priv *priv = d_to_priv(d); int ret; u8 buf[2]; /* open RTL2832U/RTL2832 I2C gate */ struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"}; /* close RTL2832U/RTL2832 I2C gate */ struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"}; /* tuner probes */ struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf}; struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf}; struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 1, buf}; struct rtl28xxu_req req_r828d = {0x0074, CMD_I2C_RD, 1, buf}; dev_dbg(&d->udev->dev, "%s:\n", __func__); /* enable GPIO3 and GPIO6 as output */ ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40); if (ret) goto err; ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48); if (ret) goto err; /* * Probe used tuner. We need to know used tuner before demod attach * since there is some demod params needed to set according to tuner. */ /* open demod I2C gate */ ret = rtl28xxu_ctrl_msg(d, &req_gate_open); if (ret) goto err; priv->tuner_name = "NONE"; /* check FC0012 ID register; reg=00 val=a1 */ ret = rtl28xxu_ctrl_msg(d, &req_fc0012); if (ret == 0 && buf[0] == 0xa1) { priv->tuner = TUNER_RTL2832_FC0012; priv->tuner_name = "FC0012"; goto found; } /* check FC0013 ID register; reg=00 val=a3 */ ret = rtl28xxu_ctrl_msg(d, &req_fc0013); if (ret == 0 && buf[0] == 0xa3) { priv->tuner = TUNER_RTL2832_FC0013; priv->tuner_name = "FC0013"; goto found; } /* check MT2266 ID register; reg=00 val=85 */ ret = rtl28xxu_ctrl_msg(d, &req_mt2266); if (ret == 0 && buf[0] == 0x85) { priv->tuner = TUNER_RTL2832_MT2266; priv->tuner_name = "MT2266"; goto found; } /* check FC2580 ID register; reg=01 val=56 */ ret = rtl28xxu_ctrl_msg(d, &req_fc2580); if (ret == 0 && buf[0] == 0x56) { priv->tuner = TUNER_RTL2832_FC2580; priv->tuner_name = "FC2580"; goto found; } /* check MT2063 ID register; reg=00 val=9e || 9c */ ret = rtl28xxu_ctrl_msg(d, &req_mt2063); if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) { priv->tuner = TUNER_RTL2832_MT2063; priv->tuner_name = "MT2063"; goto found; } /* check MAX3543 ID register; reg=00 val=38 */ ret = rtl28xxu_ctrl_msg(d, &req_max3543); if (ret == 0 && buf[0] == 0x38) { priv->tuner = TUNER_RTL2832_MAX3543; priv->tuner_name = "MAX3543"; goto found; } /* check TUA9001 ID register; reg=7e val=2328 */ ret = rtl28xxu_ctrl_msg(d, &req_tua9001); if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) { priv->tuner = TUNER_RTL2832_TUA9001; priv->tuner_name = "TUA9001"; goto found; } /* check MXL5007R ID register; reg=d9 val=14 */ ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t); if (ret == 0 && buf[0] == 0x14) { priv->tuner = TUNER_RTL2832_MXL5007T; priv->tuner_name = "MXL5007T"; goto found; } /* check E4000 ID register; reg=02 val=40 */ ret = rtl28xxu_ctrl_msg(d, &req_e4000); if (ret == 0 && buf[0] == 0x40) { priv->tuner = TUNER_RTL2832_E4000; priv->tuner_name = "E4000"; goto found; } /* check TDA18272 ID register; reg=00 val=c760 */ ret = rtl28xxu_ctrl_msg(d, &req_tda18272); if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) { priv->tuner = TUNER_RTL2832_TDA18272; priv->tuner_name = "TDA18272"; goto found; } /* check R820T ID register; reg=00 val=69 */ ret = rtl28xxu_ctrl_msg(d, &req_r820t); if (ret == 0 && buf[0] == 0x69) { priv->tuner = TUNER_RTL2832_R820T; priv->tuner_name = "R820T"; goto found; } /* check R828D ID register; reg=00 val=69 */ ret = rtl28xxu_ctrl_msg(d, &req_r828d); if (ret == 0 && buf[0] == 0x69) { priv->tuner = TUNER_RTL2832_R828D; priv->tuner_name = "R828D"; goto found; } found: dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name); /* close demod I2C gate */ ret = rtl28xxu_ctrl_msg(d, &req_gate_close); if (ret < 0) goto err; return 0; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static const struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = { .i2c_addr = 0x10, /* 0x20 */ .xtal = 28800000, .ts_mode = 0, .spec_inv = 1, .vtop = 0x20, .krf = 0x04, .agc_targ_val = 0x2d, }; static const struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = { .i2c_addr = 0x10, /* 0x20 */ .xtal = 28800000, .ts_mode = 0, .spec_inv = 1, .vtop = 0x20, .krf = 0x04, .agc_targ_val = 0x2d, }; static const struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = { .i2c_addr = 0x10, /* 0x20 */ .xtal = 28800000, .ts_mode = 0, .spec_inv = 0, .vtop = 0x3f, .krf = 0x04, .agc_targ_val = 0x3e, }; static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap) { struct dvb_usb_device *d = adap_to_d(adap); struct rtl28xxu_priv *priv = d_to_priv(d); const struct rtl2830_config *rtl2830_config; int ret; dev_dbg(&d->udev->dev, "%s:\n", __func__); switch (priv->tuner) { case TUNER_RTL2830_QT1010: rtl2830_config = &rtl28xxu_rtl2830_qt1010_config; break; case TUNER_RTL2830_MT2060: rtl2830_config = &rtl28xxu_rtl2830_mt2060_config; break; case TUNER_RTL2830_MXL5005S: rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config; break; default: dev_err(&d->udev->dev, "%s: unknown tuner=%s\n", KBUILD_MODNAME, priv->tuner_name); ret = -ENODEV; goto err; } /* attach demodulator */ adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config, &d->i2c_adap); if (!adap->fe[0]) { ret = -ENODEV; goto err; } return 0; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static const struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = { .i2c_addr = 0x10, /* 0x20 */ .xtal = 28800000, .tuner = TUNER_RTL2832_FC0012 }; static const struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = { .i2c_addr = 0x10, /* 0x20 */ .xtal = 28800000, .tuner = TUNER_RTL2832_FC0013 }; static const struct rtl2832_config rtl28xxu_rtl2832_tua9001_config = { .i2c_addr = 0x10, /* 0x20 */ .xtal = 28800000, .tuner = TUNER_RTL2832_TUA9001, }; static const struct rtl2832_config rtl28xxu_rtl2832_e4000_config = { .i2c_addr = 0x10, /* 0x20 */ .xtal = 28800000, .tuner = TUNER_RTL2832_E4000, }; static const struct rtl2832_config rtl28xxu_rtl2832_r820t_config = { .i2c_addr = 0x10, .xtal = 28800000, .tuner = TUNER_RTL2832_R820T, }; static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) { int ret; u8 val; dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg); switch (cmd) { case FC_FE_CALLBACK_VHF_ENABLE: /* set output values */ ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val); if (ret) goto err; if (arg) val &= 0xbf; /* set GPIO6 low */ else val |= 0x40; /* set GPIO6 high */ ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val); if (ret) goto err; break; default: ret = -EINVAL; goto err; } return 0; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) { int ret; u8 val; dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg); /* * CEN always enabled by hardware wiring * RESETN GPIO4 * RXEN GPIO1 */ switch (cmd) { case TUA9001_CMD_RESETN: if (arg) val = (1 << 4); else val = (0 << 4); ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10); if (ret) goto err; break; case TUA9001_CMD_RXEN: if (arg) val = (1 << 1); else val = (0 << 1); ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02); if (ret) goto err; break; } return 0; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) { struct rtl28xxu_priv *priv = d->priv; switch (priv->tuner) { case TUNER_RTL2832_FC0012: return rtl2832u_fc0012_tuner_callback(d, cmd, arg); case TUNER_RTL2832_TUA9001: return rtl2832u_tua9001_tuner_callback(d, cmd, arg); default: break; } return 0; } static int rtl2832u_frontend_callback(void *adapter_priv, int component, int cmd, int arg) { struct i2c_adapter *adap = adapter_priv; struct dvb_usb_device *d = i2c_get_adapdata(adap); dev_dbg(&d->udev->dev, "%s: component=%d cmd=%d arg=%d\n", __func__, component, cmd, arg); switch (component) { case DVB_FRONTEND_COMPONENT_TUNER: return rtl2832u_tuner_callback(d, cmd, arg); default: break; } return 0; } static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap) { int ret; struct dvb_usb_device *d = adap_to_d(adap); struct rtl28xxu_priv *priv = d_to_priv(d); const struct rtl2832_config *rtl2832_config; dev_dbg(&d->udev->dev, "%s:\n", __func__); switch (priv->tuner) { case TUNER_RTL2832_FC0012: rtl2832_config = &rtl28xxu_rtl2832_fc0012_config; break; case TUNER_RTL2832_FC0013: rtl2832_config = &rtl28xxu_rtl2832_fc0013_config; break; case TUNER_RTL2832_FC2580: /* FIXME: do not abuse fc0012 settings */ rtl2832_config = &rtl28xxu_rtl2832_fc0012_config; break; case TUNER_RTL2832_TUA9001: rtl2832_config = &rtl28xxu_rtl2832_tua9001_config; break; case TUNER_RTL2832_E4000: rtl2832_config = &rtl28xxu_rtl2832_e4000_config; break; case TUNER_RTL2832_R820T: case TUNER_RTL2832_R828D: rtl2832_config = &rtl28xxu_rtl2832_r820t_config; break; default: dev_err(&d->udev->dev, "%s: unknown tuner=%s\n", KBUILD_MODNAME, priv->tuner_name); ret = -ENODEV; goto err; } /* attach demodulator */ adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config, &d->i2c_adap); if (!adap->fe[0]) { ret = -ENODEV; goto err; } /* RTL2832 I2C repeater */ priv->demod_i2c_adapter = rtl2832_get_i2c_adapter(adap->fe[0]); /* set fe callback */ adap->fe[0]->callback = rtl2832u_frontend_callback; return 0; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static struct qt1010_config rtl28xxu_qt1010_config = { .i2c_address = 0x62, /* 0xc4 */ }; static struct mt2060_config rtl28xxu_mt2060_config = { .i2c_address = 0x60, /* 0xc0 */ .clock_out = 0, }; static struct mxl5005s_config rtl28xxu_mxl5005s_config = { .i2c_address = 0x63, /* 0xc6 */ .if_freq = IF_FREQ_4570000HZ, .xtal_freq = CRYSTAL_FREQ_16000000HZ, .agc_mode = MXL_SINGLE_AGC, .tracking_filter = MXL_TF_C_H, .rssi_enable = MXL_RSSI_ENABLE, .cap_select = MXL_CAP_SEL_ENABLE, .div_out = MXL_DIV_OUT_4, .clock_out = MXL_CLOCK_OUT_DISABLE, .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, .top = MXL5005S_TOP_25P2, .mod_mode = MXL_DIGITAL_MODE, .if_mode = MXL_ZERO_IF, .AgcMasterByte = 0x00, }; static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; struct dvb_usb_device *d = adap_to_d(adap); struct rtl28xxu_priv *priv = d_to_priv(d); struct i2c_adapter *rtl2830_tuner_i2c; struct dvb_frontend *fe; dev_dbg(&d->udev->dev, "%s:\n", __func__); /* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */ rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]); switch (priv->tuner) { case TUNER_RTL2830_QT1010: fe = dvb_attach(qt1010_attach, adap->fe[0], rtl2830_tuner_i2c, &rtl28xxu_qt1010_config); break; case TUNER_RTL2830_MT2060: fe = dvb_attach(mt2060_attach, adap->fe[0], rtl2830_tuner_i2c, &rtl28xxu_mt2060_config, 1220); break; case TUNER_RTL2830_MXL5005S: fe = dvb_attach(mxl5005s_attach, adap->fe[0], rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config); break; default: fe = NULL; dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, priv->tuner); } if (fe == NULL) { ret = -ENODEV; goto err; } return 0; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static const struct fc2580_config rtl2832u_fc2580_config = { .i2c_addr = 0x56, .clock = 16384000, }; static struct tua9001_config rtl2832u_tua9001_config = { .i2c_addr = 0x60, }; static const struct fc0012_config rtl2832u_fc0012_config = { .i2c_address = 0x63, /* 0xc6 >> 1 */ .xtal_freq = FC_XTAL_28_8_MHZ, }; static const struct r820t_config rtl2832u_r820t_config = { .i2c_addr = 0x1a, .xtal = 28800000, .max_i2c_msg_len = 2, .rafael_chip = CHIP_R820T, }; static const struct r820t_config rtl2832u_r828d_config = { .i2c_addr = 0x3a, .xtal = 16000000, .max_i2c_msg_len = 2, .rafael_chip = CHIP_R828D, }; static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap) { int ret; struct dvb_usb_device *d = adap_to_d(adap); struct rtl28xxu_priv *priv = d_to_priv(d); struct dvb_frontend *fe = NULL; struct i2c_board_info info; struct i2c_client *client; dev_dbg(&d->udev->dev, "%s:\n", __func__); memset(&info, 0, sizeof(struct i2c_board_info)); switch (priv->tuner) { case TUNER_RTL2832_FC0012: fe = dvb_attach(fc0012_attach, adap->fe[0], &d->i2c_adap, &rtl2832u_fc0012_config); /* since fc0012 includs reading the signal strength delegate * that to the tuner driver */ adap->fe[0]->ops.read_signal_strength = adap->fe[0]->ops.tuner_ops.get_rf_strength; /* attach SDR */ dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, &rtl28xxu_rtl2832_fc0012_config, NULL); break; case TUNER_RTL2832_FC0013: fe = dvb_attach(fc0013_attach, adap->fe[0], &d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ); /* fc0013 also supports signal strength reading */ adap->fe[0]->ops.read_signal_strength = adap->fe[0]->ops.tuner_ops.get_rf_strength; /* attach SDR */ dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, &rtl28xxu_rtl2832_fc0013_config, NULL); break; case TUNER_RTL2832_E4000: { struct v4l2_subdev *sd; struct i2c_adapter *i2c_adap_internal = rtl2832_get_private_i2c_adapter(adap->fe[0]); struct e4000_config e4000_config = { .fe = adap->fe[0], .clock = 28800000, }; strlcpy(info.type, "e4000", I2C_NAME_SIZE); info.addr = 0x64; info.platform_data = &e4000_config; request_module(info.type); client = i2c_new_device(priv->demod_i2c_adapter, &info); if (client == NULL || client->dev.driver == NULL) break; if (!try_module_get(client->dev.driver->owner)) { i2c_unregister_device(client); break; } priv->client = client; sd = i2c_get_clientdata(client); i2c_set_adapdata(i2c_adap_internal, d); /* attach SDR */ dvb_attach(rtl2832_sdr_attach, adap->fe[0], i2c_adap_internal, &rtl28xxu_rtl2832_e4000_config, sd); } break; case TUNER_RTL2832_FC2580: fe = dvb_attach(fc2580_attach, adap->fe[0], &d->i2c_adap, &rtl2832u_fc2580_config); break; case TUNER_RTL2832_TUA9001: /* enable GPIO1 and GPIO4 as output */ ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12); if (ret) goto err; ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12); if (ret) goto err; fe = dvb_attach(tua9001_attach, adap->fe[0], &d->i2c_adap, &rtl2832u_tua9001_config); break; case TUNER_RTL2832_R820T: fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap, &rtl2832u_r820t_config); /* Use tuner to get the signal strength */ adap->fe[0]->ops.read_signal_strength = adap->fe[0]->ops.tuner_ops.get_rf_strength; /* attach SDR */ dvb_attach(rtl2832_sdr_attach, adap->fe[0], &d->i2c_adap, &rtl28xxu_rtl2832_r820t_config, NULL); break; case TUNER_RTL2832_R828D: /* power off mn88472 demod on GPIO0 */ ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x00, 0x01); if (ret) goto err; ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01); if (ret) goto err; ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01); if (ret) goto err; fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap, &rtl2832u_r828d_config); /* Use tuner to get the signal strength */ adap->fe[0]->ops.read_signal_strength = adap->fe[0]->ops.tuner_ops.get_rf_strength; break; default: dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME, priv->tuner); } if (fe == NULL && priv->client == NULL) { ret = -ENODEV; goto err; } return 0; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl28xxu_init(struct dvb_usb_device *d) { int ret; u8 val; dev_dbg(&d->udev->dev, "%s:\n", __func__); /* init USB endpoints */ ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val); if (ret) goto err; /* enable DMA and Full Packet Mode*/ val |= 0x09; ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val); if (ret) goto err; /* set EPA maximum packet size to 0x0200 */ ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4); if (ret) goto err; /* change EPA FIFO length */ ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4); if (ret) goto err; return ret; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static void rtl28xxu_exit(struct dvb_usb_device *d) { struct rtl28xxu_priv *priv = d->priv; struct i2c_client *client = priv->client; dev_dbg(&d->udev->dev, "%s:\n", __func__); /* remove I2C tuner */ if (client) { module_put(client->dev.driver->owner); i2c_unregister_device(client); } return; } static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff) { int ret; u8 gpio, sys0, epa_ctl[2]; dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); /* demod adc */ ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0); if (ret) goto err; /* tuner power, read GPIOs */ ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio); if (ret) goto err; dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); if (onoff) { gpio |= 0x01; /* GPIO0 = 1 */ gpio &= (~0x10); /* GPIO4 = 0 */ gpio |= 0x04; /* GPIO2 = 1, LED on */ sys0 = sys0 & 0x0f; sys0 |= 0xe0; epa_ctl[0] = 0x00; /* clear stall */ epa_ctl[1] = 0x00; /* clear reset */ } else { gpio &= (~0x01); /* GPIO0 = 0 */ gpio |= 0x10; /* GPIO4 = 1 */ gpio &= (~0x04); /* GPIO2 = 1, LED off */ sys0 = sys0 & (~0xc0); epa_ctl[0] = 0x10; /* set stall */ epa_ctl[1] = 0x02; /* set reset */ } dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio); /* demod adc */ ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0); if (ret) goto err; /* tuner power, write GPIOs */ ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio); if (ret) goto err; /* streaming EP: stall & reset */ ret = rtl28xx_wr_regs(d, USB_EPA_CTL, epa_ctl, 2); if (ret) goto err; if (onoff) usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81)); return ret; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff) { int ret; dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); if (onoff) { /* GPIO3=1, GPIO4=0 */ ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18); if (ret) goto err; /* suspend? */ ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10); if (ret) goto err; /* enable PLL */ ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80); if (ret) goto err; /* disable reset */ ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20); if (ret) goto err; mdelay(5); /* enable ADC */ ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x48, 0x48); if (ret) goto err; /* streaming EP: clear stall & reset */ ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2); if (ret) goto err; ret = usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81)); if (ret) goto err; } else { /* GPIO4=1 */ ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10); if (ret) goto err; /* disable ADC */ ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x48); if (ret) goto err; /* disable PLL */ ret = rtl28xx_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80); if (ret) goto err; /* streaming EP: set stall & reset */ ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2); if (ret) goto err; } return ret; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } #if IS_ENABLED(CONFIG_RC_CORE) static int rtl2831u_rc_query(struct dvb_usb_device *d) { int ret, i; struct rtl28xxu_priv *priv = d->priv; u8 buf[5]; u32 rc_code; struct rtl28xxu_reg_val rc_nec_tab[] = { { 0x3033, 0x80 }, { 0x3020, 0x43 }, { 0x3021, 0x16 }, { 0x3022, 0x16 }, { 0x3023, 0x5a }, { 0x3024, 0x2d }, { 0x3025, 0x16 }, { 0x3026, 0x01 }, { 0x3028, 0xb0 }, { 0x3029, 0x04 }, { 0x302c, 0x88 }, { 0x302e, 0x13 }, { 0x3030, 0xdf }, { 0x3031, 0x05 }, }; /* init remote controller */ if (!priv->rc_active) { for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) { ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg, rc_nec_tab[i].val); if (ret) goto err; } priv->rc_active = true; } ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5); if (ret) goto err; if (buf[4] & 0x01) { if (buf[2] == (u8) ~buf[3]) { if (buf[0] == (u8) ~buf[1]) { /* NEC standard (16 bit) */ rc_code = buf[0] << 8 | buf[2]; } else { /* NEC extended (24 bit) */ rc_code = buf[0] << 16 | buf[1] << 8 | buf[2]; } } else { /* NEC full (32 bit) */ rc_code = buf[0] << 24 | buf[1] << 16 | buf[2] << 8 | buf[3]; } rc_keydown(d->rc_dev, rc_code, 0); ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1); if (ret) goto err; /* repeated intentionally to avoid extra keypress */ ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1); if (ret) goto err; } return ret; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl2831u_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) { rc->map_name = RC_MAP_EMPTY; rc->allowed_protos = RC_BIT_NEC; rc->query = rtl2831u_rc_query; rc->interval = 400; return 0; } static int rtl2832u_rc_query(struct dvb_usb_device *d) { int ret, i, len; struct rtl28xxu_priv *priv = d->priv; struct ir_raw_event ev; u8 buf[128]; static const struct rtl28xxu_reg_val_mask refresh_tab[] = { {IR_RX_IF, 0x03, 0xff}, {IR_RX_BUF_CTRL, 0x80, 0xff}, {IR_RX_CTRL, 0x80, 0xff}, }; /* init remote controller */ if (!priv->rc_active) { static const struct rtl28xxu_reg_val_mask init_tab[] = { {SYS_DEMOD_CTL1, 0x00, 0x04}, {SYS_DEMOD_CTL1, 0x00, 0x08}, {USB_CTRL, 0x20, 0x20}, {SYS_GPIO_DIR, 0x00, 0x08}, {SYS_GPIO_OUT_EN, 0x08, 0x08}, {SYS_GPIO_OUT_VAL, 0x08, 0x08}, {IR_MAX_DURATION0, 0xd0, 0xff}, {IR_MAX_DURATION1, 0x07, 0xff}, {IR_IDLE_LEN0, 0xc0, 0xff}, {IR_IDLE_LEN1, 0x00, 0xff}, {IR_GLITCH_LEN, 0x03, 0xff}, {IR_RX_CLK, 0x09, 0xff}, {IR_RX_CFG, 0x1c, 0xff}, {IR_MAX_H_TOL_LEN, 0x1e, 0xff}, {IR_MAX_L_TOL_LEN, 0x1e, 0xff}, {IR_RX_CTRL, 0x80, 0xff}, }; for (i = 0; i < ARRAY_SIZE(init_tab); i++) { ret = rtl28xx_wr_reg_mask(d, init_tab[i].reg, init_tab[i].val, init_tab[i].mask); if (ret) goto err; } priv->rc_active = true; } ret = rtl28xx_rd_reg(d, IR_RX_IF, &buf[0]); if (ret) goto err; if (buf[0] != 0x83) goto exit; ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]); if (ret) goto err; len = buf[0]; /* read raw code from hw */ ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len); if (ret) goto err; /* let hw receive new code */ for (i = 0; i < ARRAY_SIZE(refresh_tab); i++) { ret = rtl28xx_wr_reg_mask(d, refresh_tab[i].reg, refresh_tab[i].val, refresh_tab[i].mask); if (ret) goto err; } /* pass data to Kernel IR decoder */ init_ir_raw_event(&ev); for (i = 0; i < len; i++) { ev.pulse = buf[i] >> 7; ev.duration = 50800 * (buf[i] & 0x7f); ir_raw_event_store_with_filter(d->rc_dev, &ev); } /* 'flush' ir_raw_event_store_with_filter() */ ir_raw_event_set_idle(d->rc_dev, true); ir_raw_event_handle(d->rc_dev); exit: return ret; err: dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); return ret; } static int rtl2832u_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) { /* disable IR interrupts in order to avoid SDR sample loss */ if (rtl28xxu_disable_rc) return rtl28xx_wr_reg(d, IR_RX_IE, 0x00); /* load empty to enable rc */ if (!rc->map_name) rc->map_name = RC_MAP_EMPTY; rc->allowed_protos = RC_BIT_ALL; rc->driver_type = RC_DRIVER_IR_RAW; rc->query = rtl2832u_rc_query; rc->interval = 400; return 0; } #else #define rtl2831u_get_rc_config NULL #define rtl2832u_get_rc_config NULL #endif static const struct dvb_usb_device_properties rtl2831u_props = { .driver_name = KBUILD_MODNAME, .owner = THIS_MODULE, .adapter_nr = adapter_nr, .size_of_priv = sizeof(struct rtl28xxu_priv), .power_ctrl = rtl2831u_power_ctrl, .i2c_algo = &rtl28xxu_i2c_algo, .read_config = rtl2831u_read_config, .frontend_attach = rtl2831u_frontend_attach, .tuner_attach = rtl2831u_tuner_attach, .init = rtl28xxu_init, .get_rc_config = rtl2831u_get_rc_config, .num_adapters = 1, .adapter = { { .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), }, }, }; static const struct dvb_usb_device_properties rtl2832u_props = { .driver_name = KBUILD_MODNAME, .owner = THIS_MODULE, .adapter_nr = adapter_nr, .size_of_priv = sizeof(struct rtl28xxu_priv), .power_ctrl = rtl2832u_power_ctrl, .i2c_algo = &rtl28xxu_i2c_algo, .read_config = rtl2832u_read_config, .frontend_attach = rtl2832u_frontend_attach, .tuner_attach = rtl2832u_tuner_attach, .init = rtl28xxu_init, .exit = rtl28xxu_exit, .get_rc_config = rtl2832u_get_rc_config, .num_adapters = 1, .adapter = { { .stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512), }, }, }; static const struct usb_device_id rtl28xxu_id_table[] = { /* RTL2831U devices: */ { DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U, &rtl2831u_props, "Realtek RTL2831U reference design", NULL) }, { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT, &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, { DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2, &rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) }, /* RTL2832U devices: */ { DVB_USB_DEVICE(USB_VID_REALTEK, 0x2832, &rtl2832u_props, "Realtek RTL2832U reference design", NULL) }, { DVB_USB_DEVICE(USB_VID_REALTEK, 0x2838, &rtl2832u_props, "Realtek RTL2832U reference design", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1, &rtl2832u_props, "TerraTec Cinergy T Stick Black", RC_MAP_TERRATEC_SLIM) }, { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT, &rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK, &rtl2832u_props, "TerraTec NOXON DAB Stick", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV2, &rtl2832u_props, "TerraTec NOXON DAB Stick (rev 2)", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV3, &rtl2832u_props, "TerraTec NOXON DAB Stick (rev 3)", NULL) }, { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TREKSTOR_TERRES_2_0, &rtl2832u_props, "Trekstor DVB-T Stick Terres 2.0", NULL) }, { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1101, &rtl2832u_props, "Dexatek DK DVB-T Dongle", NULL) }, { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6680, &rtl2832u_props, "DigitalNow Quad DVB-T Receiver", NULL) }, { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_MINID, &rtl2832u_props, "Leadtek Winfast DTV Dongle Mini D", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3, &rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) }, { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102, &rtl2832u_props, "Dexatek DK mini DVB-T Dongle", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d7, &rtl2832u_props, "TerraTec Cinergy T Stick+", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd3a8, &rtl2832u_props, "ASUS My Cinema-U3100Mini Plus V2", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd393, &rtl2832u_props, "GIGABYTE U7300", NULL) }, { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1104, &rtl2832u_props, "MSI DIGIVOX Micro HD", NULL) }, { DVB_USB_DEVICE(USB_VID_COMPRO, 0x0620, &rtl2832u_props, "Compro VideoMate U620F", NULL) }, { DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394, &rtl2832u_props, "MaxMedia HU394-T", NULL) }, { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03, &rtl2832u_props, "Leadtek WinFast DTV Dongle mini", NULL) }, { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A, &rtl2832u_props, "Crypto ReDi PC 50 A", NULL) }, { DVB_USB_DEVICE(USB_VID_KYE, 0x707f, &rtl2832u_props, "Genius TVGo DVB-T03", NULL) }, /* RTL2832P devices: */ { DVB_USB_DEVICE(USB_VID_HANFTEK, 0x0131, &rtl2832u_props, "Astrometa DVB-T2", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); static struct usb_driver rtl28xxu_usb_driver = { .name = KBUILD_MODNAME, .id_table = rtl28xxu_id_table, .probe = dvb_usbv2_probe, .disconnect = dvb_usbv2_disconnect, .suspend = dvb_usbv2_suspend, .resume = dvb_usbv2_resume, .reset_resume = dvb_usbv2_reset_resume, .no_dynamic_id = 1, .soft_unbind = 1, }; module_usb_driver(rtl28xxu_usb_driver); MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver"); MODULE_AUTHOR("Antti Palosaari "); MODULE_AUTHOR("Thomas Mair "); MODULE_LICENSE("GPL");