#ifndef ASMARM_DMA_MAPPING_H #define ASMARM_DMA_MAPPING_H #ifdef __KERNEL__ #include #include #include #include /* * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions * used internally by the DMA-mapping API to provide DMA addresses. They * must not be used by drivers. */ #ifndef __arch_page_to_dma static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) { return (dma_addr_t)__pfn_to_bus(page_to_pfn(page)); } static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { return (void *)__bus_to_virt(addr); } static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) { return (dma_addr_t)__virt_to_bus((unsigned long)(addr)); } #else static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) { return __arch_page_to_dma(dev, page); } static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { return __arch_dma_to_virt(dev, addr); } static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) { return __arch_virt_to_dma(dev, addr); } #endif /* * DMA-consistent mapping functions. These allocate/free a region of * uncached, unwrite-buffered mapped memory space for use with DMA * devices. This is the "generic" version. The PCI specific version * is in pci.h * * Note: Drivers should NOT use this function directly, as it will break * platforms with CONFIG_DMABOUNCE. * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ extern void dma_cache_maint(const void *kaddr, size_t size, int rw); extern void dma_cache_maint_page(struct page *page, unsigned long offset, size_t size, int rw); /* * Return whether the given device DMA address mask can be supported * properly. For example, if your device can only drive the low 24-bits * during bus mastering, then you would pass 0x00ffffff as the mask * to this function. * * FIXME: This should really be a platform specific issue - we should * return false if GFP_DMA allocations may not satisfy the supplied 'mask'. */ static inline int dma_supported(struct device *dev, u64 mask) { if (mask < ISA_DMA_THRESHOLD) return 0; return 1; } static inline int dma_set_mask(struct device *dev, u64 dma_mask) { if (!dev->dma_mask || !dma_supported(dev, dma_mask)) return -EIO; *dev->dma_mask = dma_mask; return 0; } static inline int dma_get_cache_alignment(void) { return 32; } static inline int dma_is_consistent(struct device *dev, dma_addr_t handle) { return !!arch_is_coherent(); } /* * DMA errors are defined by all-bits-set in the DMA address. */ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { return dma_addr == ~0; } /* * Dummy noncoherent implementation. We don't provide a dma_cache_sync * function so drivers using this API are highlighted with build warnings. */ static inline void *dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { return NULL; } static inline void dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle) { } /** * dma_alloc_coherent - allocate consistent memory for DMA * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @size: required memory size * @handle: bus-specific DMA address * * Allocate some uncached, unbuffered memory for a device for * performing DMA. This function allocates pages, and will * return the CPU-viewed address, and sets @handle to be the * device-viewed address. */ extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t); /** * dma_free_coherent - free memory allocated by dma_alloc_coherent * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @size: size of memory originally requested in dma_alloc_coherent * @cpu_addr: CPU-view address returned from dma_alloc_coherent * @handle: device-view address returned from dma_alloc_coherent * * Free (and unmap) a DMA buffer previously allocated by * dma_alloc_coherent(). * * References to memory and mappings associated with cpu_addr/handle * during and after this call executing are illegal. */ extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t); /** * dma_mmap_coherent - map a coherent DMA allocation into user space * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @vma: vm_area_struct describing requested user mapping * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent * @handle: device-view address returned from dma_alloc_coherent * @size: size of memory originally requested in dma_alloc_coherent * * Map a coherent DMA buffer previously allocated by dma_alloc_coherent * into user space. The coherent DMA buffer must not be freed by the * driver until the user space mapping has been released. */ int dma_mmap_coherent(struct device *, struct vm_area_struct *, void *, dma_addr_t, size_t); /** * dma_alloc_writecombine - allocate writecombining memory for DMA * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @size: required memory size * @handle: bus-specific DMA address * * Allocate some uncached, buffered memory for a device for * performing DMA. This function allocates pages, and will * return the CPU-viewed address, and sets @handle to be the * device-viewed address. */ extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *, gfp_t); #define dma_free_writecombine(dev,size,cpu_addr,handle) \ dma_free_coherent(dev,size,cpu_addr,handle) int dma_mmap_writecombine(struct device *, struct vm_area_struct *, void *, dma_addr_t, size_t); #ifdef CONFIG_DMABOUNCE /* * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" * and utilize bounce buffers as needed to work around limited DMA windows. * * On the SA-1111, a bug limits DMA to only certain regions of RAM. * On the IXP425, the PCI inbound window is 64MB (256MB total RAM) * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM) * * The following are helper functions used by the dmabounce subystem * */ /** * dmabounce_register_dev * * @dev: valid struct device pointer * @small_buf_size: size of buffers to use with small buffer pool * @large_buf_size: size of buffers to use with large buffer pool (can be 0) * * This function should be called by low-level platform code to register * a device as requireing DMA buffer bouncing. The function will allocate * appropriate DMA pools for the device. * */ extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long); /** * dmabounce_unregister_dev * * @dev: valid struct device pointer * * This function should be called by low-level platform code when device * that was previously registered with dmabounce_register_dev is removed * from the system. * */ extern void dmabounce_unregister_dev(struct device *); /** * dma_needs_bounce * * @dev: valid struct device pointer * @dma_handle: dma_handle of unbounced buffer * @size: size of region being mapped * * Platforms that utilize the dmabounce mechanism must implement * this function. * * The dmabounce routines call this function whenever a dma-mapping * is requested to determine whether a given buffer needs to be bounced * or not. The function must return 0 if the buffer is OK for * DMA access and 1 if the buffer needs to be bounced. * */ extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); /* * The DMA API, implemented by dmabounce.c. See below for descriptions. */ extern dma_addr_t dma_map_single(struct device *, void *, size_t, enum dma_data_direction); extern dma_addr_t dma_map_page(struct device *, struct page *, unsigned long, size_t, enum dma_data_direction); extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction); /* * Private functions */ int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction); int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction); #else static inline int dmabounce_sync_for_cpu(struct device *d, dma_addr_t addr, unsigned long offset, size_t size, enum dma_data_direction dir) { return 1; } static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr, unsigned long offset, size_t size, enum dma_data_direction dir) { return 1; } /** * dma_map_single - map a single buffer for streaming DMA * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @cpu_addr: CPU direct mapped address of buffer * @size: size of buffer to map * @dir: DMA transfer direction * * Ensure that any data held in the cache is appropriately discarded * or written back. * * The device owns this memory once this call has completed. The CPU * can regain ownership by calling dma_unmap_single() or * dma_sync_single_for_cpu(). */ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, enum dma_data_direction dir) { BUG_ON(!valid_dma_direction(dir)); if (!arch_is_coherent()) dma_cache_maint(cpu_addr, size, dir); return virt_to_dma(dev, cpu_addr); } /** * dma_map_page - map a portion of a page for streaming DMA * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @page: page that buffer resides in * @offset: offset into page for start of buffer * @size: size of buffer to map * @dir: DMA transfer direction * * Ensure that any data held in the cache is appropriately discarded * or written back. * * The device owns this memory once this call has completed. The CPU * can regain ownership by calling dma_unmap_page(). */ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir) { BUG_ON(!valid_dma_direction(dir)); if (!arch_is_coherent()) dma_cache_maint_page(page, offset, size, dir); return page_to_dma(dev, page) + offset; } /** * dma_unmap_single - unmap a single buffer previously mapped * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @handle: DMA address of buffer * @size: size of buffer (same as passed to dma_map_single) * @dir: DMA transfer direction (same as passed to dma_map_single) * * Unmap a single streaming mode DMA translation. The handle and size * must match what was provided in the previous dma_map_single() call. * All other usages are undefined. * * After this call, reads by the CPU to the buffer are guaranteed to see * whatever the device wrote there. */ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { /* nothing to do */ } #endif /* CONFIG_DMABOUNCE */ /** * dma_unmap_page - unmap a buffer previously mapped through dma_map_page() * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @handle: DMA address of buffer * @size: size of buffer (same as passed to dma_map_page) * @dir: DMA transfer direction (same as passed to dma_map_page) * * Unmap a page streaming mode DMA translation. The handle and size * must match what was provided in the previous dma_map_page() call. * All other usages are undefined. * * After this call, reads by the CPU to the buffer are guaranteed to see * whatever the device wrote there. */ static inline void dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { dma_unmap_single(dev, handle, size, dir); } /** * dma_sync_single_range_for_cpu * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @handle: DMA address of buffer * @offset: offset of region to start sync * @size: size of region to sync * @dir: DMA transfer direction (same as passed to dma_map_single) * * Make physical memory consistent for a single streaming mode DMA * translation after a transfer. * * If you perform a dma_map_single() but wish to interrogate the * buffer using the cpu, yet do not wish to teardown the PCI dma * mapping, you must call this function before doing so. At the * next point you give the PCI dma address back to the card, you * must first the perform a dma_sync_for_device, and then the * device again owns the buffer. */ static inline void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle, unsigned long offset, size_t size, enum dma_data_direction dir) { BUG_ON(!valid_dma_direction(dir)); dmabounce_sync_for_cpu(dev, handle, offset, size, dir); } static inline void dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle, unsigned long offset, size_t size, enum dma_data_direction dir) { BUG_ON(!valid_dma_direction(dir)); if (!dmabounce_sync_for_device(dev, handle, offset, size, dir)) return; if (!arch_is_coherent()) dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir); } static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { dma_sync_single_range_for_cpu(dev, handle, 0, size, dir); } static inline void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { dma_sync_single_range_for_device(dev, handle, 0, size, dir); } /* * The scatter list versions of the above methods. */ extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction); extern void dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int, enum dma_data_direction); extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int, enum dma_data_direction); #endif /* __KERNEL__ */ #endif