Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Previously, optional bool choices met the following conditions
simultaneously:
- sym_is_choice(sym)
- sym_is_changeable(sym)
- type == S_BOOLEAN
It no longer occurs since 6a1215888e ("kconfig: remove 'optional'
property support"). Remove the dead code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This code previously displayed child symbols of the selected choice
member.
Since commit 7e3465f63a ("kconfig: do not reparent the menu inside
a choice block"), choice members never have child symbols, therefore
this is dead code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, bool choices have a checkbox, but tristate choices do not.
It is opposite.
Bool choices should not have a checkbox, as they are fixed to 'y' since
commit 6a1215888e ("kconfig: remove 'optional' property support").
Tristate choices, however, should have a checkbox to allow users to
toggle the value.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, sym_get_choice_prop() and expr_list_for_each_sym() are
used to iterate on choice members.
Replace them with menu_for_each_sub_entry(), which achieves the same
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
We can do this without relying on P_CHOICE by checking the parent in
the menu structure.
Introduce a new helper to retrieve the choice if the given symbol is a
choice member.
This is intended to replace prop_get_symbol(sym_get_choice_prop()) and
deprecate P_CHOICE eventually.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
menu_finalize() warns default properties for choice members and prompts
outside the choice block. These should be hard errors.
While I was here, I moved the checks to slim down menu_finalize().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choice members must have a prompt; hence make it an error.
While I was here, I moved the check to the parser to slim down
_menu_finalize().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Following the approach employed in commit bedf923623 ("kconfig: use
linked list in get_symbol_str() to iterate over menus"), simplify the
iteration on the menus of the specified symbol.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
SYMBOL_CHANGED and MENU_CHANGED are used to update GUI frontends
when the symbol value is changed. These are used inconsistently:
SYMBOL_CHANGED in gconf.c and MENU_CHANGE in qconf.cc.
MENU_CHANGED works more properly when a symbol has multiple prompts
(although such code is not ideal).
[test code]
config FOO
bool "foo prompt 1"
config FOO
bool "foo prompt 2"
In gconfig, if one of the two checkboxes is clicked, only the first
one is toggled. In xconfig, the two checkboxes work in sync.
Replace SYMBOL_CHANGED in gconf.c with MENU_CHANGED to align with
the xconfig behavior.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Every time a config file is loaded (either by clicking the "Load" button
or selecting "File" -> "Load" from the menu), a new list is appended to
the pane.
The current tree needs to be cleared by calling gtk_tree_store_clear().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
This flag is set to symbols that are not intended to be written
to the .config file.
Since commit b75b0a819a ("kconfig: change defconfig_list option to
environment variable"), SYMBOL_NO_WRITE is only set to choices.
Therefore, (sym->flags & SYMBOL_NO_WRITE) is equivalent to
sym_is_choice(sym). This flag is no longer necessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'choice' statement is primarily used to exclusively select one
option, but the 'optional' property allows all entries to be disabled.
In the following example, both A and B can be disabled simultaneously:
choice
prompt "choose A, B, or nothing"
optional
config A
bool "A"
config B
bool "B"
endchoice
You can achieve the equivalent outcome by other means.
A common solution is to add another option to guard the choice block.
In the following example, you can set ENABLE_A_B_CHOICE=n to disable
the entire choice block:
choice
prompt "choose A or B"
depends on ENABLE_A_B_CHOICE
config A
bool "A"
config B
bool "B"
endchoice
Another approach is to insert one more entry:
choice
prompt "choose A, B, or disable both"
config A
bool "A"
config B
bool "B"
config DISABLE_A_AND_B
bool "choose this to disable both A and B"
endchoice
Some real examples are DEBUG_INFO_NONE, INITRAMFS_COMPRESSION_NONE,
LTO_NONE, etc.
The 'optional' property is even more unnecessary for a tristate choice.
Without the 'optional' property, you can disable A and B; you can set
'm' in the choice prompt, and disable A and B individually:
choice
prompt "choose one built-in or make them modular"
config A
tristate "A"
config B
tristate "B"
endchoice
In conclusion, the 'optional' property was unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
All symbols except choices have a name.
Previously, choices were allowed to have a name, but commit c83f020973
("kconfig: remove named choice support") eliminated that possibility.
Now, it is easy to distinguish choices from normal symbols; if the name
is NULL, it is a choice.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
All symbols except choices have a name.
child->sym->name never becomes NULL inside choice blocks.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use menu_for_each_entry() to traverse the menu tree instead of
implementing similar logic in each function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Several functions require traversing menu entries sequentially. This
commit introduces some helpers to simplify such operations.
The menu_next() function facilitates depth-first traversal:
1. Descend to the child level if the current menu has one
2. Move to the next sibling at the same level if available
3. Ascend to the parent level if there is no more child or sibling
The menu_for_each_sub_entry() macro iterates over all submenu entries
using depth-first traverse.
The menu_for_each_entry() macro is the same, but over all menu entries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fixed a typo in some variables where height was misspelled as heigth.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The boolean 'choice' is used to list exclusively selected config
options.
You must not add a dependency between choice members, because such a
dependency would create an invisible entry.
In the following test case, it is impossible to choose 'C'.
[Test Case 1]
choice
prompt "Choose one, but how to choose C?"
config A
bool "A"
config B
bool "B"
config C
bool "C"
depends on A
endchoice
Hence, Kconfig shows the following error message:
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol C
Kconfig:10: symbol C is part of choice A
Kconfig:4: symbol A is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
However, Kconfig does not report anything for the following similar code:
[Test Case 2]
choice
prompt "Choose one, but how to choose B?"
config A
bool "A"
config B
bool "B"
depends on A
config C
bool "C"
endchoice
This is because menu_finalize() reparents the menu tree when an entry
depends on the preceding one.
With reparenting, the menu tree:
choice
|- A
|- B
\- C
... will be transformed into the following structure:
choice
|- A
| \- B
\- C
Consequently, Kconfig considers only 'A' and 'C' as choice members.
This behavior is awkward. The second test case should be an error too.
This commit stops reparenting inside a choice.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit c8fb7d7e48 ("kconfig: fix broken dependency in randconfig-
generated .config") fixed the issue, but I did not add a test case.
This commit adds a test case that emulates the reported situation.
The test would fail without c8fb7d7e48.
To handle the choice "choose X", FOO must be calculated beforehand.
FOO depends on A, which is a member of another choice "choose A or B".
Kconfig _temporarily_ assumes the value of A to proceed. The choice
"choose A or B" will be shuffled later, but the result may or may not
meet "FOO depends on A". Kconfig should invalidate the symbol values
and recompute them.
In the real example for ARCH=arm64, the choice "Instrumentation type"
needs the value of CPU_BIG_ENDIAN. The choice "Endianness" will be
shuffled later.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 3b9a19e089 ("kconfig: loop as long as we changed some
symbols in randconfig"), conf_set_all_new_symbols() is repeated until
there is no more choice left to be shuffled. The motivation was to
shuffle a choice nested in another choice.
Although commit 09d5873e4d ("kconfig: allow only 'config', 'comment',
and 'if' inside 'choice'") disallowed the nested choice structure,
we must still keep 3b9a19e089 because there are still cases where
conf_set_all_new_symbols() must iterate.
scripts/kconfig/tests/choice_randomize/Kconfig is the test case.
The second choice depends on 'B', which is the member of the first
choice.
With 3b9a19e089 reverted, we would never get the pattern specified by
scripts/kconfig/tests/choice_randomize/expected_config2.
A real example can be found in lib/Kconfig.debug. Without 3b9a19e089,
the randconfig would not shuffle the "Compressed Debug information"
choice, which depends on DEBUG_INFO, which is derived from another
choice "Debug information".
My goal is to refactor Kconfig so that randconfig will work more
simply, without using the loop.
For now, let's add a test case to ensure all dependent choices are
shuffled, as it is a somewhat tricky case for the current Kconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When the condition 'sym == NULL' is met, the code will reach the
'next_menu' label regardless of the return value from menu_is_visible().
menu_is_visible() calculates some symbol values as a side-effect, for
instance by calling expr_calc_value(menu->visibility), but all the
symbol values will be calculated eventually.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Remove inputbox_order, searchbox, searchbox_title, searchbox_border
because they are initialized, but not used anywhere.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For MENUCONFIG_COLOR=blackbg, the text in inactive buttons is invisible
because both the foreground and background are black.
Change the foreground color to white and remove the highlighting.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 5a1aa8a1af ("kconfig: add named choice group") did not provide
enough explanation regarding its benefits. A use case was found in
another project [1] sometime later, this feature has never been used in
the kernel.
[1]: https://lore.kernel.org/all/201012150034.01356.yann.morin.1998@anciens.enib.fr/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Currently, get_symbol_str() uses a tricky approach to traverse the
associated menus.
With relevant menus now linked to the symbol using a linked list,
use list_for_each_entry() for iterating on the menus.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Currently, there is no direct link from (struct symbol) to (struct menu).
It is still possible to access associated menus through the P_SYMBOL
property, because property::menu is the relevant menu entry, but it
results in complex code, as seen in get_symbol_str().
Use a linked list for simpler traversal of relevant menus.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
When a checklist is opened, the cursor is rendered in a wrong position
(after the last list element on the screen). You can observe it by
opening any checklist in menuconfig.
Added wmove() to set the cursor in the proper position, just like in
menubox.c. Removed wnoutrefresh(dialog) because dialog window has
already been updated in print_buttons(). Replaced wnoutrefresh(list) and
doupdate() calls with one wrefresh(list) call.
Signed-off-by: Matthew Bystrin <dev.mbstr@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use helper macros in hashtable.h for generic hashtable implementation.
We can git rid of the hash head index of for_all_symbols().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
for_all_symbols() iterates in the symbol hash table. The order of
iteration depends on the hash table implementation.
If you use it for printing errors, they are shown in random order.
For example, the order of following test input and the corresponding
error do not match:
- scripts/kconfig/tests/err_recursive_dep/Kconfig
- scripts/kconfig/tests/err_recursive_dep/expected_stderr
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Do not feed back the choice type to choice values.
Each choice value should explicitly specify 'bool' or 'tristate',
as all the Kconfig files already do. If the type were missing,
"config symbol defined without type" would be shown.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, a linked list is used to keep track of all the Kconfig
files that have ever been parsed. Every time the "source" statement
is encountered, the linked list is traversed to check if the file has
been opened before. This prevents the same file from being recorded
in include/config/auto.conf.cmd again.
Given 1500+ Kconfig files parsed, a hashtable is now a more optimal
data structure.
By the way, you may wonder why we check this in the first place.
It matters only when the same file is included multiple times.
In old days, such a use case was forbidden, but commit f094f8a1b2
("kconfig: allow multiple inclusion of the same file") provided a bit
more flexibility. Of course, it is almost hypothetical...
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Remove the 'static' qualifier from strhash() so that it can be accessed
from other files. Move it to util.c, which is a more appropriate location.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
To use ARRAY_SIZE from other files, move it to its own header,
just like include/linux/array_size.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Update the existing macros and inline functions based on
include/linux/list.h.
The variable name '_new' can be reverted to 'new' because this header
is no longer included from the C++ file, scripts/kconfig/qconf.cc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The struct list_head is often embedded in other structures, while other
code is used in C functions.
By separating struct list_head into its own header, other headers are no
longer required to include the entire list.h.
This is similar to the kernel space, where struct list_head is defined
in <linux/types.h> instead of <linux/list.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, file_lookup() returns a pointer to (struct file), but the
callers use only file->name.
Make it return the ->name member directly.
This adjustment encapsulates struct file and file_list as internal
implementation.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
struct file has two link nodes, 'next' and 'parent'.
The former is used to link files in the 'file_list' linked list,
which manages the list of Kconfig files seen so far.
The latter is used to link files in the 'current_file' linked list,
which manages the inclusion ("source") tree.
The latter should be tracked together with the lexer state.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
