- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko).
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko).
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks).
- Refine the SMB0001 quirk in the ACPI device enumeration code so as to
address an i2c-scmi driver regression (Andy Shevchenko).
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko).
-----BEGIN PGP SIGNATURE-----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=QyfX
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix a couple of compiler warnings, refine an ACPI device
enumeration quirk to address a driver regression and clean up code.
Specifics:
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko)
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko)
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks)
- Refine the SMB0001 quirk in the ACPI device enumeration code so as
to address an i2c-scmi driver regression (Andy Shevchenko)
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko)"
* tag 'acpi-6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Use the acpi_match_acpi_device() helper
ACPI: platform: Move SMB0001 HID to the header and reuse
ACPI: platform: Ignore SMB0001 only when it has resources
ACPI: bus: Introduce acpi_match_acpi_device() helper
ACPI: scan: fix undeclared variable warnings by including sleep.h
ACPI: bus: Constify acpi_companion_match() returned value
ACPI: scan: Move acpi_root to internal header
Merge additional ACPI device enumeration code changes for 6.5-rc1.
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko).
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko).
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks).
- Refine the SMB0001 quirk in the ACPI device enumeration code so as to
address an i2c-scmi driver regression (Andy Shevchenko).
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko).
* acpi-bus:
ACPI: bus: Constify acpi_companion_match() returned value
* acpi-scan:
ACPI: scan: Use the acpi_match_acpi_device() helper
ACPI: platform: Move SMB0001 HID to the header and reuse
ACPI: platform: Ignore SMB0001 only when it has resources
ACPI: bus: Introduce acpi_match_acpi_device() helper
ACPI: scan: fix undeclared variable warnings by including sleep.h
ACPI: scan: Move acpi_root to internal header
Instead of doing two pass parsing of the table, replace
acpi_match_device_ids() with acpi_match_acpi_device().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are at least two places in the kernel that are using
the SMB0001 HID. Make it to be available via acpi_drivers.h
header file. While at it, replace hard coded one with a
definition.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Link: https://lore.kernel.org/r/20230621151652.79579-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After switching i2c-scmi driver to be a platform one, it stopped
being enumerated on number of Kontron platforms, because it's
listed in the forbidden_id_list.
To resolve the situation, add a flag to driver data to allow devices
with no resources in _CRS to be enumerated via platform bus.
Fixes: 03d4287add ("i2c: scmi: Convert to be a platform driver")
Closes: https://lore.kernel.org/r/60c1756765b9a3f1eab0dcbd84f59f00fe1caf48.camel@kontron.com
Link: https://lore.kernel.org/r/20230621151652.79579-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
[ rjw: Move has_resource definition to the block in which it is used and
initialize it to 'false' ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Match the ACPI device against a given list of ACPI IDs.
Subsequent changes will make use of this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two pieces of data being exported from drivers/acpi/scan.c
(acpi_device_lock and acpi_wakeup_device_list) that don't have their
definitions declared in anything scan.c is including.
Fix the following sparse warnings by including sleep.h to add the
declarations of acpi_device_lock and acpi_wakeup_device_list to
fix the followng sparse warnings:
drivers/acpi/scan.c:42:1: warning: symbol 'acpi_device_lock' was not declared. Should it be static?
drivers/acpi/scan.c:43:1: warning: symbol 'acpi_wakeup_device_list' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Support for ACPI.
* Various cleanups to the ISA string parsing, including making them
case-insensitive
* Support for the vector extension.
* Support for independent irq/softirq stacks.
* Our CPU DT binding now has "unevaluatedProperties: false"
-----BEGIN PGP SIGNATURE-----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=Fpq8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
1, Preliminary ClangBuiltLinux enablement;
2, Add support to clone a time namespace;
3, Add vector extensions support;
4, Add SMT (Simultaneous Multi-Threading) support;
5, Support dbar with different hints;
6, Introduce hardware page table walker;
7, Add jump-label implementation;
8, Add rethook and uprobes support;
9, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=3gt3
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- preliminary ClangBuiltLinux enablement
- add support to clone a time namespace
- add vector extensions support
- add SMT (Simultaneous Multi-Threading) support
- support dbar with different hints
- introduce hardware page table walker
- add jump-label implementation
- add rethook and uprobes support
- some bug fixes and other small changes
* tag 'loongarch-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (28 commits)
LoongArch: Remove five DIE_* definitions in kdebug.h
LoongArch: Add uprobes support
LoongArch: Use larch_insn_gen_break() for kprobes
LoongArch: Add larch_insn_gen_break() to generate break insns
LoongArch: Check for AMO instructions in insns_not_supported()
LoongArch: Move three functions from kprobes.c to inst.c
LoongArch: Replace kretprobe with rethook
LoongArch: Add jump-label implementation
LoongArch: Select HAVE_DEBUG_KMEMLEAK to support kmemleak
LoongArch: Export some arch-specific pm interfaces
LoongArch: Introduce hardware page table walker
LoongArch: Support dbar with different hints
LoongArch: Add SMT (Simultaneous Multi-Threading) support
LoongArch: Add vector extensions support
LoongArch: Add support to clone a time namespace
Makefile: Add loongarch target flag for Clang compilation
LoongArch: Mark Clang LTO as working
LoongArch: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation
LoongArch: vDSO: Use CLANG_FLAGS instead of filtering out '--target='
LoongArch: Tweak CFLAGS for Clang compatibility
...
Fix suspend-to-idle breakage on multiple systems introduced by one of
the recent commits that may cause the affected systems to overheat while
suspended.
-----BEGIN PGP SIGNATURE-----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=k0Sg
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix suspend-to-idle breakage on multiple systems introduced by one of
the recent commits that may cause the affected systems to overheat
while suspended"
* tag 'acpi-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Fix acpi_ec_dispatch_gpe()
Loongson-3A6000 has SMT (Simultaneous Multi-Threading) support, each
physical core has two logical cores (threads). This patch add SMT probe
and scheduler support via ACPI PPTT.
If SCHED_SMT enabled, Loongson-3A6000 is treated as 4 cores, 8 threads;
If SCHED_SMT disabled, Loongson-3A6000 is treated as 8 cores, 8 threads.
Remove smp_num_siblings to support HMP (Heterogeneous Multi-Processing).
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
acpi_companion_match() doesn't alter the contents of the passed
parameter, so we don't expect that returned value can be altered
either. So constify it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Compiler is not happy about handling of acpi_root variable:
...drivers/acpi/bus.c:37:20: warning: symbol 'acpi_root' was not declared. Should it be static?
Move it's definition to the internal header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 896e97bf99 ("ACPI: EC: Clear GPE on interrupt handling only")
broke suspend-to-idle at least on Dell XPS13 9360 and 9380.
The problem is that acpi_ec_dispatch_gpe() must clear the EC GPE,
because the EC GPE handler never runs when the system is in the
suspend-to-idle state and if the EC GPE is not cleared by the suspend-
to-idle loop, it is never cleared at all which leads to a GPE storm.
This causes suspend-to-idle to burn energy instead of saving it which
is potentially dangerous (the affected machines heat up rather badly
when that happens).
Addess this by making acpi_ec_dispatch_gpe() clear the EC GPE as it did
before.
Fixes: 896e97bf99 ("ACPI: EC: Clear GPE on interrupt handling only")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter).
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui).
- Fix invalid initialization for pl4_supported field in the Intel RAPL
power capping driver (Sumeet Pawnikar).
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven).
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny).
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny).
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo).
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET).
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski).
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary).
-----BEGIN PGP SIGNATURE-----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=SZV7
-----END PGP SIGNATURE-----
Merge tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add Intel TPMI (Topology Aware Register and PM Capsule
Interface) support to the power capping subsystem, extend the
intel_idle driver to work in VM guests where MWAIT is not available,
extend the system-wide power management diagnostics, fix bugs and
clean up code.
Specifics:
- Introduce power capping core support for Intel TPMI (Topology Aware
Register and PM Capsule Interface) and a TPMI interface driver for
Intel RAPL (Zhang Rui, Dan Carpenter)
- Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
driver (Zhang Rui)
- Fix invalid initialization for pl4_supported field in the Intel
RAPL power capping driver (Sumeet Pawnikar)
- Clean up the intel_idle driver, make it work with VM guests that
cannot use the MWAIT instruction and address the case in which the
host may enter a deep idle state when the guest is idle (Arjan van
de Ven)
- Prevent cpufreq drivers that provide the ->adjust_perf() callback
without a ->fast_switch() one which is used as a fallback from the
former in some cases (Wyes Karny)
- Fix some issues related to the AMD P-state cpufreq driver (Mario
Limonciello, Wyes Karny)
- Fix the energy_performance_preference attribute handling in the
intel_pstate driver in passive mode (Tero Kristo)
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng)
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui)
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann)
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello)
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson)
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich)
- Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
somewhat (Christophe JAILLET)
- Ensure that the Exynos PPMU driver is already loaded before the
Exynos Bus driver starts probing so as to avoid a possible freeze
loading of the kernel modules (Marek Szyprowski)
- Fix variable deferencing before NULL check in the mtk-cci devfreq
driver (Sukrut Bellary)"
* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
intel_idle: Add a "Long HLT" C1 state for the VM guest mode
cpufreq: intel_pstate: Fix energy_performance_preference for passive
cpufreq: amd-pstate: Add a kernel config option to set default mode
cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
cpufreq: amd-pstate: Set default governor to schedutil
PM: domains: Move the verification of in-params from genpd_add_device()
cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
cpufreq: amd-pstate: Write CPPC enable bit per-socket
intel_idle: Add support for using intel_idle in a VM guest using just hlt
cpufreq: Fail driver register if it has adjust_perf without fast_switch
intel_idle: clean up the (new) state_update_enter_method function
intel_idle: refactor state->enter manipulation into its own function
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
powercap: RAPL: Fix a NULL vs IS_ERR() bug
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
powercap: RAPL: fix invalid initialization for pl4_supported field
...
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki).
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello).
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann).
- Drop several ACPI resource management quirks related to IRQ ovverides
on AMD "Zen" systems (Mario Limonciello).
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella).
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede).
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad X131e
(3371 AMD version) and Apple iMac11,3 and stop trying to use vendor
backlight control on relatively recent systems (Hans de Goede).
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede).
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann).
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki).
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki).
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang).
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin).
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc).
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmSZv6MSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxdy4QAJ1kT5uMjWTRvadaOL0N9M1IOqEKI77a
QW/hC1QLbOMY79c7O8wEhF2La872b4fYCjaFaA98dzEu+/ISSDXUis7qb2cys/Ss
EHVwNVGungCQJ5axaio593av0dttFk/PTZVpHp93swCpR9QME8Gxx+Vf48Gg7zzq
BFVGc36KAgTmnh82s9VCSFnYJIS87yQ57eys+aW4R2HGsYPKPnsfMx95nwPGM+z/
e5Li4DLlF47IA8Fi8i+ZvqWy4iRC7iGuFTn/3gPPcUIWsKlL3VEhWuT3fXSqPZTO
VkXTg8bxKZMaPgg4ckM4V++Lkx4E6gO1rEIw0/8IANULvscBG4k6cgBwXfxJDCk3
+oiXHO3t3s+9mKZP3tAad5yPGDN1i7d96/68frPt8ESTQ206o2j7s/mjqyZmh2bJ
Ox5rI2HPDOpl6wT70DLEXB6O5kdI+EOMrJ/1w7Mmsc3oeQKlR8RLlNuRElTVrxfp
Fw5neWzKeqAKXTBgW+uIN4gtcwyXTtCOmP6a53T+xlFZAJHtTaJGBKpJA4Aa7oRf
VbVoGpeatXqvrsTwVsQ01qhZp46gzO8obzyLvincX69wkwqLJ4hbLBEdCEjPnbJK
y5FasTQrVPR1t3Lk0PfRooC+iq+c1JtYgnkrRzjfKEN0K2/ywygrzx14Fo6vEaF+
OF6hIbipYKgP
=46Do
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These rework the handling of notifications in ACPI button drivers (to
enable future simplifications and cleanups), clean up the ACPI thermal
driver, update the ACPI backlight driver, add quirks working around
AML bugs on some systems, fix some assorted issues and clean up code.
Specifics:
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki)
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello)
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann)
- Drop several ACPI resource management quirks related to IRQ
ovverides on AMD "Zen" systems (Mario Limonciello)
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella)
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede)
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad
X131e (3371 AMD version) and Apple iMac11,3 and stop trying to use
vendor backlight control on relatively recent systems (Hans de
Goede)
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede)
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann)
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki)
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki)
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang)
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin)
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc)
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla)"
* tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
ACPI: thermal: Drop struct acpi_thermal_flags
ACPI: thermal: Drop struct acpi_thermal_state
ACPI: bus: Simplify installation and removal of notify callback
ACPI: tiny-power-button: Eliminate the driver notify callback
ACPI: button: Use different notify handlers for lid and buttons
ACPI: button: Eliminate the driver notify callback
ACPI: thermal: Eliminate struct acpi_thermal_state_flags
ACPI: thermal: Move acpi_thermal_driver definition
ACPI: thermal: Move symbol definitions to one place
ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
ACPI: thermal: Use BIT() macro for defining flags
APEI: GHES: correctly return NULL for ghes_get_devices()
ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
ACPI: APEI: mark bert_disable as __initdata
ACPI: EC: Clear GPE on interrupt handling only
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
ACPI: resource: Remove "Zen" specific match and quirks
...
- Support for the Armv8.9 Permission Indirection Extensions. While this
feature doesn't add new functionality, it enables future support for
Guarded Control Stacks (GCS) and Permission Overlays.
- User-space support for the Armv8.8 memcpy/memset instructions.
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups.
- Removal of superfluous ISBs on context switch (following retrospective
architecture tightening).
- Decode the ISS2 register during faults for additional information to
help with debugging.
- KPTI clean-up/simplification of the trampoline exit code.
- Addressing several -Wmissing-prototype warnings.
- Kselftest improvements for signal handling and ptrace.
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code.
- More sysreg conversions to the automatic register/bitfields
generation.
- CPU capabilities handling cleanup.
- Arm documentation updates: ACPI, ptdump.
-----BEGIN PGP SIGNATURE-----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=rNBK
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Notable features are user-space support for the memcpy/memset
instructions and the permission indirection extension.
- Support for the Armv8.9 Permission Indirection Extensions. While
this feature doesn't add new functionality, it enables future
support for Guarded Control Stacks (GCS) and Permission Overlays
- User-space support for the Armv8.8 memcpy/memset instructions
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups
- Removal of superfluous ISBs on context switch (following
retrospective architecture tightening)
- Decode the ISS2 register during faults for additional information
to help with debugging
- KPTI clean-up/simplification of the trampoline exit code
- Addressing several -Wmissing-prototype warnings
- Kselftest improvements for signal handling and ptrace
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code
- More sysreg conversions to the automatic register/bitfields
generation
- CPU capabilities handling cleanup
- Arm documentation updates: ACPI, ptdump"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
Documentation/arm64: Add ptdump documentation
arm64: hibernate: remove WARN_ON in save_processor_state
kselftest/arm64: Log signal code and address for unexpected signals
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
arm64/fpsimd: Exit streaming mode when flushing tasks
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
...
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to shorten
the (kexec) reboot time of cloud servers to reduce the downtime of the
VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary() on
x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending on
the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to come
up and apply microcode. That's more than 80% of the actual onlining
procedure.
This can be reduced significantly by splitting the bringup mechanism
into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP which
needs to be brought up.
The APs wake up, do their firmware initialization and run the low
level kernel startup code including microcode loading in parallel
up to the first synchronization point. (#1 and #2 above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible in
theory, but it's questionable whether required surgery would be
justified for a pretty small gain.
If the system is large enough the first AP is already waiting at the
first synchronization point when the boot CPU finished the wake-up of
the last AP. That reduces the AP bringup time on that SKL from ~800ms
to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU, microcode
patch size and other factors. There are some opportunities to reduce
the overhead further, but that needs some deep surgery in the x86 CPU
bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to locate
the scheduling and the actual execution points. That allows to measure
IPI delivery time precisely.
-----BEGIN PGP SIGNATURE-----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=Y8if
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
Merge updates related to system-wide power management and generic power
domains (genpd) updates for 6.5-rc1:
- Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
(Kai-Heng Feng).
- Correct spelling mistake in a comment in the hibernation code (Wang
Honghui).
- Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
build warning (Arnd Bergmann).
- Restrict pm_pr_dbg() to system-wide power transitions and use it in
a few additional places (Mario Limonciello).
- Drop verification of in-params from genpd_add_device() and ensure
that all of its callers will do it (Ulf Hansson).
- Prevent possible integer overflows from occurring in
genpd_parse_state() (Nikita Zhandarovich).
* pm-sleep:
platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
pinctrl: amd: Use pm_pr_dbg to show debugging messages
ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
PM: suspend: add a arch_resume_nosmt() prototype
PM: hibernate: Correct spelling mistake in a comment
PM: suspend: Fix pm_suspend_target_state handling for !CONFIG_PM
* pm-domains:
PM: domains: Move the verification of in-params from genpd_add_device()
PM: domains: fix integer overflow issues in genpd_parse_state()
Merge ACPI APEI changes, an ACPI PAD driver update and an ACPI FFH
handling cleanup related to ARM64 for 6.5-rc1:
- Make ghes_get_devices() return NULL to indicate that there are no
GHES devices so as to allow vendor-specific EDAC drivers to probe
then (Li Yang).
- Mark bert_disable() as __initdata and drop an unused function from
the APEI GHES code (Miaohe Lin).
- Make the ACPI PAD (Processor Aggregator Device) driver realize that
Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc).
- Drop the certainly unnecessary and likely incorrect inclusion of
linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla).
* acpi-apei:
APEI: GHES: correctly return NULL for ghes_get_devices()
ACPI: APEI: mark bert_disable as __initdata
ACPI: APEI: GHES: Remove unused ghes_estatus_pool_size_request()
* acpi-pad:
ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
* acpi-misc:
ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
Merge ACPI thermal driver cleanups and ACPI button drivers rework for
6.5-rc1:
- Clean up the ACPI thermal driver and drop some dead or otherwise
unneded code from it (Rafael Wysocki).
- Rework the handling of notifications in the ACPI button drivers so
as to allow the common notification handling code for devices to be
simplified (Rafael Wysocki).
* acpi-thermal:
ACPI: thermal: Drop struct acpi_thermal_flags
ACPI: thermal: Drop struct acpi_thermal_state
ACPI: thermal: Eliminate struct acpi_thermal_state_flags
ACPI: thermal: Move acpi_thermal_driver definition
ACPI: thermal: Move symbol definitions to one place
ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
ACPI: thermal: Use BIT() macro for defining flags
* acpi-button:
ACPI: bus: Simplify installation and removal of notify callback
ACPI: tiny-power-button: Eliminate the driver notify callback
ACPI: button: Use different notify handlers for lid and buttons
ACPI: button: Eliminate the driver notify callback
Merge x86-related ACPI changes, backlight-related ACPI changes, an Intel
SoC (LPSS) ACPI driver update and a missing prototype warning fix
related to ACPI NFIT for 6.5-rc1:
- Add quirks to work around ACPI tables defects on Lenovo Yoga Book
yb1-x90f/l and Nextbook Ares 8A (Hans de Goede).
- Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad X131e
(3371 AMD version) and Apple iMac11,3 and stop trying to use vendor
backlight control on relatively recent systems (Hans de Goede).
- Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
ACPI LPSS (Intel SoC) driver (Hans de Goede).
- Add nfit_intel_shutdown_status() declaration to a local header to
avoid a "missing prototypes" build warning (Arnd Bergmann).
* acpi-x86:
ACPI: x86: Add ACPI_QUIRK_UART1_SKIP for Lenovo Yoga Book yb1-x90f/l
ACPI: button: Add lid disable DMI quirk for Nextbook Ares 8A
ACPI: x86: Add skip i2c clients quirk for Nextbook Ares 8A
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
ACPI: video: Add backlight=native DMI quirk for Lenovo ThinkPad X131e (3371 AMD version)
ACPI: video: Add backlight=native DMI quirk for Apple iMac11,3
* acpi-soc:
ACPI: LPSS: Add pwm_lookup_table entry for second PWM on CHT/BSW devices
* acpi-tables:
ACPI: NFIT: Add declaration in a local header
Merge ACPI device enumeration changes, ACPI power management update,
ACPI resources management updates and an EC driver update for 6.5-rc1:
- Reduce ACPI device enumeration overhead related to devices with
dependencies (Rafael Wysocki).
- Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
Limonciello).
- Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
Bergmann).
- Drop several ACPI resource management quirks related to IRQ ovverides
on AMD "Zen" systems (Mario Limonciello).
- Modify the ACPI EC driver to make it only clear the EC GPE status
when handling the GPE (Jeremy Compostella).
* acpi-scan:
ACPI: scan: Reduce overhead related to devices with dependencies
* acpi-pm:
ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
ACPI: PM: s2idle: fix section mismatch warning
* acpi-resource:
ACPI: resource: Remove "Zen" specific match and quirks
* acpi-ec:
ACPI: EC: Clear GPE on interrupt handling only
* arm64/for-next/perf:
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible
drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver
perf/arm_cspmu: Decouple APMT dependency
perf/arm_cspmu: Clean up ACPI dependency
ACPI/APMT: Don't register invalid resource
perf/arm_cspmu: Fix event attribute type
perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used
drivers/perf: hisi: Don't migrate perf to the CPU going to teardown
drivers/perf: apple_m1: Force 63bit counters for M2 CPUs
perf/arm-cmn: Fix DTC reset
perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust
perf/arm-cci: Slightly optimize cci_pmu_sync_counters()
* for-next/kpti:
: Simplify KPTI trampoline exit code
arm64: entry: Simplify tramp_alias macro and tramp_exit routine
arm64: entry: Preserve/restore X29 even for compat tasks
* for-next/missing-proto-warn:
: Address -Wmissing-prototype warnings
arm64: add alt_cb_patch_nops prototype
arm64: move early_brk64 prototype to header
arm64: signal: include asm/exception.h
arm64: kaslr: add kaslr_early_init() declaration
arm64: flush: include linux/libnvdimm.h
arm64: module-plts: inline linux/moduleloader.h
arm64: hide unused is_valid_bugaddr()
arm64: efi: add efi_handle_corrupted_x18 prototype
arm64: cpuidle: fix #ifdef for acpi functions
arm64: kvm: add prototypes for functions called in asm
arm64: spectre: provide prototypes for internal functions
arm64: move cpu_suspend_set_dbg_restorer() prototype to header
arm64: avoid prototype warnings for syscalls
arm64: add scs_patch_vmlinux prototype
arm64: xor-neon: mark xor_arm64_neon_*() static
* for-next/iss2-decode:
: Add decode of ISS2 to data abort reports
arm64/esr: Add decode of ISS2 to data abort reporting
arm64/esr: Use GENMASK() for the ISS mask
* for-next/kselftest:
: Various arm64 kselftest improvements
kselftest/arm64: Log signal code and address for unexpected signals
kselftest/arm64: Add a smoke test for ptracing hardware break/watch points
* for-next/misc:
: Miscellaneous patches
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
arm64: hibernate: remove WARN_ON in save_processor_state
arm64/fpsimd: Exit streaming mode when flushing tasks
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
arm64: consolidate rox page protection logic
arm64: set __exception_irq_entry with __irq_entry as a default
arm64: syscall: unmask DAIF for tracing status
arm64: lockdep: enable checks for held locks when returning to userspace
arm64/cpucaps: increase string width to properly format cpucaps.h
arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature
* for-next/feat_mops:
: Support for ARMv8.8 memcpy instructions in userspace
kselftest/arm64: add MOPS to hwcap test
arm64: mops: allow disabling MOPS from the kernel command line
arm64: mops: detect and enable FEAT_MOPS
arm64: mops: handle single stepping after MOPS exception
arm64: mops: handle MOPS exceptions
KVM: arm64: hide MOPS from guests
arm64: mops: don't disable host MOPS instructions from EL2
arm64: mops: document boot requirements for MOPS
KVM: arm64: switch HCRX_EL2 between host and guest
arm64: cpufeature: detect FEAT_HCX
KVM: arm64: initialize HCRX_EL2
* for-next/module-alloc:
: Make the arm64 module allocation code more robust (clean-up, VA range expansion)
arm64: module: rework module VA range selection
arm64: module: mandate MODULE_PLTS
arm64: module: move module randomization to module.c
arm64: kaslr: split kaslr/module initialization
arm64: kasan: remove !KASAN_VMALLOC remnants
arm64: module: remove old !KASAN_VMALLOC logic
* for-next/sysreg: (21 commits)
: More sysreg conversions to automatic generation
arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation
arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation
arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation
arm64/sysreg: Convert TRBSR_EL1 register to automatic generation
arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation
arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation
arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation
arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format
arm64/sysreg: Convert OSECCR_EL1 to automatic generation
arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation
arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation
arm64/sysreg: Convert OSLAR_EL1 to automatic generation
arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1
arm64/sysreg: Convert MDSCR_EL1 to automatic register generation
...
* for-next/cpucap:
: arm64 cpucap clean-up
arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities()
arm64: cpufeature: use cpucap naming
arm64: alternatives: use cpucap naming
arm64: standardise cpucap bitmap names
* for-next/acpi:
: Various arm64-related ACPI patches
ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()
* for-next/kdump:
: Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64
arm64: add kdump.rst into index.rst
Documentation: add kdump.rst to present crashkernel reservation on arm64
arm64: kdump: simplify the reservation behaviour of crashkernel=,high
* for-next/acpi-doc:
: Update ACPI documentation for Arm systems
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
* for-next/doc:
: arm64 documentation updates
Documentation/arm64: Add ptdump documentation
* for-next/tpidr2-fix:
: Fix the TPIDR2_EL0 register restoring on sigreturn
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
The Dell Studio 1569 predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.
Add a DMI quirk to use the native intel_backlight interface which
does work properly.
Reported-by: raycekarneal <raycekarneal@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop struct acpi_thermal_flags which is not really used (only one
flag in it is ever set, but it is never read) and call
acpi_execute_simple_method() directly to evaluate _SCP instead of
using acpi_thermal_set_cooling_mode(), which has no callers after
that change, so drop it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Drop struct acpi_thermal_state which is not really used.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because the only drivers that cared about button fixed events take care
of those events by themselves now, eliminate the code related to them
from acpi_device_install_notify_handler() and
acpi_device_remove_notify_handler().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rework the ACPI tiny-power-button driver to install a notify handler or
a fixed event handler for the device it binds to by itself and drop its
notify callback.
This will allow acpi_device_install_notify_handler() and
acpi_device_remove_notify_handler() to be simplified going forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the lid handling in acpi_button_notify() is special, introduce
acpi_lid_notify() specifically for handling lid notifications.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rework the ACPI button driver to install notify handlers or fixed
event handlers for the devices it binds to by itself, reduce the
indentation level in its notify handler routine and drop its
notify callback.
This will allow acpi_device_install_notify_handler() and
acpi_device_remove_notify_handler() to be simplified going forward
and it will allow the driver to use different notify handlers for the
lid and for the power and sleep buttons.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
The addition of might_sleep() to down_timeout() caused the latter to
enable interrupts unconditionally in some cases, which in turn broke
the ACPI S3 wakeup path in acpi_suspend_enter(), where down_timeout()
is called by acpi_disable_all_gpes() via acpi_ut_acquire_mutex().
Namely, if CONFIG_DEBUG_ATOMIC_SLEEP is set, might_sleep() causes
might_resched() to be used and if CONFIG_PREEMPT_VOLUNTARY is set,
this triggers __cond_resched() which may call preempt_schedule_common(),
so __schedule() gets invoked and it ends up with enabled interrupts (in
the prev == next case).
Now, enabling interrupts early in the S3 wakeup path causes the kernel
to crash.
Address this by modifying acpi_suspend_enter() to disable GPEs without
attempting to acquire the sleeping lock which is not needed in that code
path anyway.
Fixes: 99409b935c ("locking/semaphore: Add might_sleep() to down_*() family")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Enabling debugging messages for the state requires turning on dynamic
debugging for the file. To make it more accessible, use
`pm_debug_messages` and clearer strings for what is happening.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notice that the enabled flag is only needed for active trip points,
so drop struct acpi_thermal_state_flags, add a simple "bool valid" field
to the definitions of all trip point structures instead of flags and
add a "bool enabled" field to struct acpi_thermal_active.
Adjust the code using the modified structures accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Move the definition of the acpi_thermal_driver structure closer to the
initialization code that registes the driver, so some function forward
declarations can be dropped.
Also move the module information to the end of the file where it is
usually located.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Move all of the symbol definitions to the initial part of the code so
they all can be found in one place.
While at it, consolidate white space used in there.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Drop the ACPI_TRIPS_REFRESH_DEVICES symbol which is redundant, because
ACPI_TRIPS_DEVICES can be used directly instead of it without any
drawbacks and rename the ACPI_TRIPS_REFRESH_THRESHOLDS to
ACPI_TRIPS_THRESHOLDS to make the code a bit more consistent.
While at it, fix up some formatting white space used in the symbol
definitions.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use the BIT() macro for defining flag symbols in the ACPI thermal driver
instead of using "raw" values for the flags.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Since 315bada690 ("EDAC: Check for GHES preference in the
chipset-specific EDAC drivers"), vendor specific EDAC driver will not
probe correctly when CONFIG_ACPI_APEI_GHES is enabled but no GHES device
is present. Make ghes_get_devices() return NULL when the GHES device
list is empty to fix the problem.
Fixes: 9057a3f7ac ("EDAC/ghes: Prepare to make ghes_edac a proper module")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The inclusion of linux/arm-smccc.h in acpi_ffh is unnecessary and can
be even termed wrong. It is needed in the arm64 architecture callback
implementation and probably is the leftover from the missed cleanup of
the initial implementation.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Zhaoxin CPUs support NONSTOP TSC feature, so do not mark these CPUs
TSC unstable when use the acpi_pad driver.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's only used inside the __init section. Mark it __initdata.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On multiple devices I work on, we noticed that
/sys/firmware/acpi/interrupts/sci_not is non-zero and keeps increasing
over time.
It turns out that there is a race condition between servicing a GPE
interrupt and handling task driven transactions.
If a GPE interrupt is received at the same time ec_poll() is running,
the advance_transaction() clears the GPE flag and the interrupt is not
serviced as acpi_ev_detect_gpe() relies on the GPE flag to call the
handler. As a result, `sci_not' is increased.
To address this, move the GPE status check and clearing from
advance_transaction() directly into acpi_ec_handle_interrupt(), so the
EC GPE only gets cleared in the interrupt handling path.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There have been 2 separate reports now about a non working
"dell_backlight" device getting registered under /sys/class/backlight
1 report for a Raptor Lake based Dell and 1 report for a Meteor Lake
(development) platform.
On hw from the last 10 years dell-laptop will not register "dell_backlight"
because acpi_video_get_backlight_type() will return acpi_backlight_video
there if called before the GPU/kms driver loads. So it does not matter if
the GPU driver's native backlight is registered after dell-laptop loads.
But it seems that on the latest generation laptops the ACPI tables
no longer contain acpi_video backlight control support which causes
acpi_video_get_backlight_type() to return acpi_backlight_vendor causing
"dell_backlight" to get registered if the dell-laptop module is loaded
before the GPU/kms driver.
Vendor specific backlight control like the "dell_backlight" device is
only necessary on quite old hw (from before acpi_video backlight control
was introduced). Work around "dell_backlight" registering on very new
hw (where acpi_video backlight control seems to be no more) by making
acpi_video_get_backlight_type() return acpi_backlight_none instead
of acpi_backlight_vendor as final fallback when the ACPI tables have
support for Windows 8 or later (laptops from after ~2012).
Suggested-by: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: AceLan Kao <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/platform-driver-x86/20230607034331.576623-1-acelan.kao@canonical.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Don't register a resource for the second page unless the dual-page
extension flag is actually present to say it's valid.
CC: Lorenzo Pieralisi <lpieralisi@kernel.org>
CC: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/63b34656e1f7b41bcb458fb6d7496e04db757e0d.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Move all of the ARM-specific initialization into one function namely
acpi_arm_init(), so it is not necessary to modify/update bus.c every
time a new piece of it is added.
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/CAJZ5v0iBZRZmV_oU+VurqxnVMbFN_ttqrL=cLh0sUH+=u0PYsw@mail.gmail.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20230606093531.2746732-1-sudeep.holla@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In Windows the Microsoft _DSM doesn't call functions 3->5->7 for suspend
and 8->6->4 for resume like Linux currently does.
Rather it calls 3->7->5 for suspend and 6->8->4 for resume.
Align this calling order for Linux as well.
Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-states
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 9946e39fe8 ("ACPI: resource: skip IRQ override on
AMD Zen platforms") attempted to overhaul the override logic so it
didn't apply on X86 AMD Zen systems. This was intentional so that
systems would prefer DSDT values instead of default MADT value for
IRQ 1 on Ryzen 6000 systems which typically uses ActiveLow for IRQ1.
This turned out to be a bad assumption because several vendors
add Interrupt Source Override but don't fix the DSDT. A pile of
quirks was collecting that proved this wasn't sustaintable.
Furthermore some vendors have used ActiveHigh for IRQ1.
To solve this problem revert the following commits:
* commit 17bb7046e7 ("ACPI: resource: Do IRQ override on all TongFang
GMxRGxx")
* commit f3cb9b7408 ("ACPI: resource: do IRQ override on Lenovo 14ALC7")
* commit bfcdf58380 ("ACPI: resource: do IRQ override on LENOVO IdeaPad")
* commit 7592b79ba4 ("ACPI: resource: do IRQ override on XMG Core 15")
* commit 9946e39fe8 ("ACPI: resource: skip IRQ override on AMD Zen
platforms")
Reported-by: evilsnoo@proton.me
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394
Reported-by: ruinairas1992@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217406
Reported-by: nmschulte@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Werner Sembach <wse@tuxedocomputers.com>
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_sleep_suspend_setup() function is missing an __init annotation,
which causes a warning in rare configurations that end up not inlining
it into its caller:
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_sleep_suspend_setup (section: .text) -> acpi_s2idle_setup (section: .init.text)
It's only called from an __init function, so adding the annotation is
correct here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_estatus_pool_size_request() is unused now, so remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
