We make the invalid assumption in arm_smmu_detach_dev() that the ATC is
clear after calling pci_disable_ats(). For one thing, only enabling the
PCIe ATS capability constitutes an implicit invalidation event, so the
comment was wrong. More importantly, the ATS capability isn't necessarily
disabled by pci_disable_ats() in a PF, if the associated VFs have ATS
enabled. Explicitly invalidate all ATC entries in arm_smmu_detach_dev().
The endpoint cannot form new ATC entries because STE.EATS is clear.
Fixes: 9ce27afc08 ("iommu/arm-smmu-v3: Add support for PCI ATS")
Reported-by: Manoj Kumar <Manoj.Kumar3@arm.com>
Reported-by: Robin Murphy <Robin.Murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When compiling a kernel without support for CMA, CONFIG_CMA_ALIGNMENT
is not defined which results in the following build failure:
In file included from ./include/linux/list.h:9:0
from ./include/linux/kobject.h:19,
from ./include/linux/of.h:17
from ./include/linux/irqdomain.h:35,
from ./include/linux/acpi.h:13,
from drivers/iommu/arm-smmu-v3.c:12:
drivers/iommu/arm-smmu-v3.c: In function ‘arm_smmu_device_hw_probe’:
drivers/iommu/arm-smmu-v3.c:194:40: error: ‘CONFIG_CMA_ALIGNMENT’ undeclared (first use in this function)
#define Q_MAX_SZ_SHIFT (PAGE_SHIFT + CONFIG_CMA_ALIGNMENT)
Fix the breakage by capping the maximum queue size based on MAX_ORDER
when CMA is not enabled.
Reported-by: Zhangshaokun <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Linux IRQ number virq is not used in IRTE allocation. Remove it.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
check if there is a not-present cache present and flush it if there is.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When amd_iommu=off was specified on the command line, free_X_resources
functions were called immediately after early_amd_iommu_init. They were
then called again when amd_iommu_init also failed (as expected).
Instead, call them only once: at the end of state_next() whenever
there's an error. These functions should be safe to call any time and
any number of times. However, since state_next is never called again in
an error state, the cleanup will only ever be run once.
This also ensures that cleanup code is run as soon as possible after an
error is detected rather than waiting for amd_iommu_init() to be called.
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The fallback to the GART driver in the case amd_iommu doesn't work was
executed in a function called free_iommu_resources, which didn't really
make sense. This was even being called twice if amd_iommu=off was
specified on the command line.
The only complication is that it needs to be verified that amd_iommu has
fully relinquished control by calling free_iommu_resources and emptying
the amd_iommu_list.
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make it safe to call iommu_disable during early init error conditions
before mmio_base is set, but after the struct amd_iommu has been added
to the amd_iommu_list. For example, this happens if firmware fails to
fill in mmio_phys in the ACPI table leading to a NULL pointer
dereference in iommu_feature_disable.
Fixes: 2c0ae1720c ('iommu/amd: Convert iommu initialization to state machine')
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Describe the memory related to page table walks as non-cacheable for
iommu instances that are not DMA coherent.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[will: Use cfg->coherent_walk, fix arm-v7s, ensure outer-shareable for NC]
Signed-off-by: Will Deacon <will@kernel.org>
IO_PGTABLE_QUIRK_NO_DMA is a bit of a misnomer, since it's really just
an indication of whether or not the page-table walker for the IOMMU is
coherent with the CPU caches. Since cache coherency is more than just a
quirk, replace the flag with its own field in the io_pgtable_cfg
structure.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
The driver_find_device() accepts a match function pointer to
filter the devices for lookup, similar to bus/class_find_device().
However, there is a minor difference in the prototype for the
match parameter for driver_find_device() with the now unified
version accepted by {bus/class}_find_device(), where it doesn't
accept a "const" qualifier for the data argument. This prevents
us from reusing the generic match functions for driver_find_device().
For this reason, change the prototype of the driver_find_device() to
make the "match" parameter in line with {bus/class}_find_device()
and adjust its callers to use the const qualifier. Also, we could
now promote the "data" parameter to const as we pass it down
as a const parameter to the match functions.
Cc: Corey Minyard <minyard@acm.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Revert a commit from the previous pile of fixes which causes
new lockdep splats. It is better to revert it for now and work
on a better and more well tested fix.
-----BEGIN PGP SIGNATURE-----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=JRtp
-----END PGP SIGNATURE-----
Merge tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"Revert a commit from the previous pile of fixes which causes new
lockdep splats. It is better to revert it for now and work on a better
and more well tested fix"
* tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
This reverts commit 7560cc3ca7.
With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt:
======================================================
WARNING: possible circular locking dependency detected
5.2.0-rc5 #78 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0
but task is already holding lock:
00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (device_domain_lock){....}:
_raw_spin_lock_irqsave+0x3c/0x50
dmar_insert_one_dev_info+0xbb/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
-> #0 (&(&iommu->lock)->rlock){+.+.}:
lock_acquire+0x9e/0x170
_raw_spin_lock+0x25/0x30
domain_context_mapping_one+0xa5/0x4e0
pci_for_each_dma_alias+0x30/0x140
dmar_insert_one_dev_info+0x3b2/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
*** DEADLOCK ***
2 locks held by swapper/0/1:
#0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422
#1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
stack backtrace:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78
Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018
Call Trace:
dump_stack+0x85/0xc0
print_circular_bug.cold.57+0x15c/0x195
__lock_acquire+0x152a/0x1710
lock_acquire+0x9e/0x170
? domain_context_mapping_one+0xa5/0x4e0
_raw_spin_lock+0x25/0x30
? domain_context_mapping_one+0xa5/0x4e0
domain_context_mapping_one+0xa5/0x4e0
? domain_context_mapping_one+0x4e0/0x4e0
pci_for_each_dma_alias+0x30/0x140
dmar_insert_one_dev_info+0x3b2/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
? printk+0x58/0x6f
? lockdep_hardirqs_on+0xf0/0x180
? do_early_param+0x8e/0x8e
? e820__memblock_setup+0x63/0x63
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
? do_early_param+0x8e/0x8e
? rcu_read_lock_sched_held+0x55/0x60
? do_early_param+0x8e/0x8e
kernel_init_freeable+0x218/0x2c1
? rest_init+0x230/0x230
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
domain_context_mapping_one() is taking device_domain_lock first then
iommu lock, while dmar_insert_one_dev_info() is doing the reverse.
That should be introduced by commit:
7560cc3ca7 ("iommu/vt-d: Fix lock inversion between iommu->lock and
device_domain_lock", 2019-05-27)
So far I still cannot figure out how the previous deadlock was
triggered (I cannot find iommu lock taken before calling of
iommu_flush_dev_iotlb()), however I'm pretty sure that that change
should be incomplete at least because it does not fix all the places
so we're still taking the locks in different orders, while reverting
that commit is very clean to me so far that we should always take
device_domain_lock first then the iommu lock.
We can continue to try to find the real culprit mentioned in
7560cc3ca7, but for now I think we should revert it to fix current
breakage.
CC: Joerg Roedel <joro@8bytes.org>
CC: Lu Baolu <baolu.lu@linux.intel.com>
CC: dave.jiang@intel.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Few Qualcomm platforms such as, sdm845 have an additional outer
cache called as System cache, aka. Last level cache (LLC) that
allows non-coherent devices to upgrade to using caching.
This cache sits right before the DDR, and is tightly coupled
with the memory controller. The clients using this cache request
their slices from this system cache, make it active, and can then
start using it.
There is a fundamental assumption that non-coherent devices can't
access caches. This change adds an exception where they *can* use
some level of cache despite still being non-coherent overall.
The coherent devices that use cacheable memory, and CPU make use of
this system cache by default.
Looking at memory types, we have following -
a) Normal uncached :- MAIR 0x44, inner non-cacheable,
outer non-cacheable;
b) Normal cached :- MAIR 0xff, inner read write-back non-transient,
outer read write-back non-transient;
attribute setting for coherenet I/O devices.
and, for non-coherent i/o devices that can allocate in system cache
another type gets added -
c) Normal sys-cached :- MAIR 0xf4, inner non-cacheable,
outer read write-back non-transient
Coherent I/O devices use system cache by marking the memory as
normal cached.
Non-coherent I/O devices should mark the memory as normal
sys-cached in page tables to use system cache.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We've been artificially limiting the size of our queues to 4k so that we
don't end up allocating huge amounts of physically-contiguous memory at
probe time. However, 4k is only enough for 256 commands in the command
queue, so instead let's try to allocate the largest queue that the SMMU
supports, retrying with a smaller size if the allocation fails.
The caveat here is that we have to limit our upper bound based on
CONFIG_CMA_ALIGNMENT to ensure that our queue allocations remain
natually aligned, which is required by the SMMU architecture.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The commit "iommu/vt-d: Probe DMA-capable ACPI name space devices"
introduced a compilation warning due to the "iommu" variable in
for_each_active_iommu() but never used the for each element, i.e,
"drhd->iommu".
drivers/iommu/intel-iommu.c: In function 'probe_acpi_namespace_devices':
drivers/iommu/intel-iommu.c:4639:22: warning: variable 'iommu' set but
not used [-Wunused-but-set-variable]
struct intel_iommu *iommu;
Silence the warning the same way as in the commit d3ed71e5cc
("drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not used")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The linux-next commit "iommu/vt-d: Duplicate iommu_resv_region objects
per device list" [1] left out an unused variable,
drivers/iommu/intel-iommu.c: In function 'dmar_parse_one_rmrr':
drivers/iommu/intel-iommu.c:4014:9: warning: variable 'length' set but
not used [-Wunused-but-set-variable]
[1] https://lore.kernel.org/patchwork/patch/1083073/
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On 32-bit architectures, phys_addr_t may be different from dma_add_t,
both smaller and bigger. This can lead to an overflow during an assignment
that clang warns about:
drivers/iommu/dma-iommu.c:230:10: error: implicit conversion from 'dma_addr_t' (aka 'unsigned long long') to
'phys_addr_t' (aka 'unsigned int') changes value from 18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion]
Use phys_addr_t here because that is the type that the variable was
declared as.
Fixes: aadad097cd ("iommu/dma: Reserve IOVA for PCIe inaccessible DMA address")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Three Fixes for Intel VT-d to fix a potential dead-lock, a
formatting fix and a bit setting fix.
- One fix for the ARM-SMMU to make it work on some platforms
with sub-optimal SMMU emulation.
-----BEGIN PGP SIGNATURE-----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=wyOl
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- three fixes for Intel VT-d to fix a potential dead-lock, a formatting
fix and a bit setting fix
- one fix for the ARM-SMMU to make it work on some platforms with
sub-optimal SMMU emulation
* tag 'iommu-fixes-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Avoid constant zero in TLBI writes
iommu/vt-d: Set the right field for Page Walk Snoop
iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock
iommu: Add missing new line for dma type
This patch replaces dma_{alloc,release}_from_contiguous() with
dma_{alloc,free}_contiguous() to simplify those function calls.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The domain_init() and md_domain_init() do almost the same job.
Consolidate them to avoid duplication.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[No functional changes]
1. Starting with commit df4f3c603a ("iommu/vt-d: Remove static identity
map code") there are no callers for iommu_prepare_rmrr_dev() but the
implementation of the function still exists, so remove it. Also, as a
ripple effect remove get_domain_for_dev() and iommu_prepare_identity_map()
because they aren't being used either.
2. Remove extra new line in couple of places.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We don't allow a device to be assigned to user level when it is locked
by any RMRR's. Hence, intel_iommu_attach_device() will return error if
a domain of type IOMMU_DOMAIN_UNMANAGED is about to attach to a device
locked by rmrr. But this doesn't apply to a domain of type other than
IOMMU_DOMAIN_UNMANAGED. This adds a check to fix this.
Fixes: fa954e6831 ("iommu/vt-d: Delegate the dma domain to upper layer")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reported-and-tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu driver will ignore some iommu units if there's no
device under its scope or those devices have been explicitly
set to bypass the DMA translation. Don't enable those iommu
units, otherwise the devices under its scope won't work.
Fixes: d8190dc638 ("iommu/vt-d: Enable DMA remapping after rmrr mapped")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If a device gets a right domain in add_device ops, it shouldn't
return error.
Fixes: 942067f1b6 ("iommu/vt-d: Identify default domains replaced with private")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now we have a new IOMMU_RESV_DIRECT_RELAXABLE reserved memory
region type, let's report USB and GFX RMRRs as relaxable ones.
We introduce a new device_rmrr_is_relaxable() helper to check
whether the rmrr belongs to the relaxable category.
This allows to have a finer reporting at IOMMU API level of
reserved memory regions. This will be exploitable by VFIO to
define the usable IOVA range and detect potential conflicts
between the guest physical address space and host reserved
regions.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce a new type for reserved region. This corresponds
to directly mapped regions which are known to be relaxable
in some specific conditions, such as device assignment use
case. Well known examples are those used by USB controllers
providing PS/2 keyboard emulation for pre-boot BIOS and
early BOOT or RMRRs associated to IGD working in legacy mode.
Since commit c875d2c1b8 ("iommu/vt-d: Exclude devices using RMRRs
from IOMMU API domains") and commit 18436afdc1 ("iommu/vt-d: Allow
RMRR on graphics devices too"), those regions are currently
considered "safe" with respect to device assignment use case
which requires a non direct mapping at IOMMU physical level
(RAM GPA -> HPA mapping).
Those RMRRs currently exist and sometimes the device is
attempting to access it but this has not been considered
an issue until now.
However at the moment, iommu_get_group_resv_regions() is
not able to make any difference between directly mapped
regions: those which must be absolutely enforced and those
like above ones which are known as relaxable.
This is a blocker for reporting severe conflicts between
non relaxable RMRRs (like MSI doorbells) and guest GPA space.
With this new reserved region type we will be able to use
iommu_get_group_resv_regions() to enumerate the IOVA space
that is usable through the IOMMU API without introducing
regressions with respect to existing device assignment
use cases (USB and IGD).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the case the RMRR device scope is a PCI-PCI bridge, let's check
the device belongs to the PCI sub-hierarchy.
Fixes: 0659b8dc45 ("iommu/vt-d: Implement reserved region get/put callbacks")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When reading the vtd specification and especially the
Reserved Memory Region Reporting Structure chapter,
it is not obvious a device scope element cannot be a
PCI-PCI bridge, in which case all downstream ports are
likely to access the reserved memory region. Let's handle
this case in device_has_rmrr.
Fixes: ea2447f700 ("intel-iommu: Prevent devices with RMRRs from being placed into SI Domain")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Several call sites are about to check whether a device belongs
to the PCI sub-hierarchy of a candidate PCI-PCI bridge.
Introduce an helper to perform that check.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
intel_iommu_get_resv_regions() aims to return the list of
reserved regions accessible by a given @device. However several
devices can access the same reserved memory region and when
building the list it is not safe to use a single iommu_resv_region
object, whose container is the RMRR. This iommu_resv_region must
be duplicated per device reserved region list.
Let's remove the struct iommu_resv_region from the RMRR unit
and allocate the iommu_resv_region directly in
intel_iommu_get_resv_regions(). We hold the dmar_global_lock instead
of the rcu-lock to allow sleeping.
Fixes: 0659b8dc45 ("iommu/vt-d: Implement reserved region get/put callbacks")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In case we expand an existing region, we unlink
this latter and insert the larger one. In
that case we should free the original region after
the insertion. Also we can immediately return.
Fixes: 6c65fb318e ("iommu: iommu_get_group_resv_regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some IOMMU hardware features, for example PCI PRI and Arm SMMU Stall,
enable recoverable I/O page faults. Allow IOMMU drivers to report PRI Page
Requests and Stall events through the new fault reporting API. The
consumer of the fault can be either an I/O page fault handler in the host,
or a guest OS.
Once handled, the fault must be completed by sending a page response back
to the IOMMU. Add an iommu_page_response() function to complete a page
fault.
There are two ways to extend the userspace API:
* Add a field to iommu_page_response and a flag to
iommu_page_response::flags describing the validity of this field.
* Introduce a new iommu_page_response_X structure with a different version
number. The kernel must then support both versions.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Traditionally, device specific faults are detected and handled within
their own device drivers. When IOMMU is enabled, faults such as DMA
related transactions are detected by IOMMU. There is no generic
reporting mechanism to report faults back to the in-kernel device
driver or the guest OS in case of assigned devices.
This patch introduces a registration API for device specific fault
handlers. This differs from the existing iommu_set_fault_handler/
report_iommu_fault infrastructures in several ways:
- it allows to report more sophisticated fault events (both
unrecoverable faults and page request faults) due to the nature
of the iommu_fault struct
- it is device specific and not domain specific.
The current iommu_report_device_fault() implementation only handles
the "shoot and forget" unrecoverable fault case. Handling of page
request faults or stalled faults will come later.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Apparently, some Qualcomm arm64 platforms which appear to expose their
SMMU global register space are still, in fact, using a hypervisor to
mediate it by trapping and emulating register accesses. Sadly, some
deployed versions of said trapping code have bugs wherein they go
horribly wrong for stores using r31 (i.e. XZR/WZR) as the source
register.
While this can be mitigated for GCC today by tweaking the constraints
for the implementation of writel_relaxed(), to avoid any potential
arms race with future compilers more aggressively optimising register
allocation, the simple way is to just remove all the problematic
constant zeros. For the write-only TLB operations, the actual value is
irrelevant anyway and any old nearby variable will provide a suitable
GPR to encode. The one point at which we really do need a zero to clear
a context bank happens before any of the TLB maintenance where crashes
have been reported, so is apparently not a problem... :/
Reported-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The event queue offers a way for the device to report access faults from
endpoints. It is implemented on virtqueue #1. Whenever the host needs to
signal a fault, it fills one of the buffers offered by the guest and
interrupts it.
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the device offers the probe feature, send a probe request for each
device managed by the IOMMU. Extract RESV_MEM information. When we
encounter a MSI doorbell region, set it up as a IOMMU_RESV_MSI region.
This will tell other subsystems that there is no need to map the MSI
doorbell in the virtio-iommu, because MSIs bypass it.
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio IOMMU is a para-virtualized device, allowing to send IOMMU
requests such as map/unmap over virtio transport without emulating page
tables. This implementation handles ATTACH, DETACH, MAP and UNMAP
requests.
The bulk of the code transforms calls coming from the IOMMU API into
corresponding virtio requests. Mappings are kept in an interval tree
instead of page tables. A little more work is required for modular and x86
support, so for the moment the driver depends on CONFIG_VIRTIO=y and
CONFIG_ARM64.
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 111 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 33 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000435.254582722@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with this program if
not write to the free software foundation inc 51 franklin street
fifth floor boston ma 02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 94 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141334.043630402@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation 51 franklin street fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 67 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141333.953658117@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During PSCI system suspend, R-Car Gen3 SoCs are powered down, and all
IPMMU state is lost. Hence after s2ram, devices wired behind an IPMMU,
and configured to use it, will see their DMA operations hang.
To fix this, restore all IPMMU contexts, and re-enable all active
micro-TLBs during system resume.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ipmmu_domain_init_context() takes care of (1) initializing the software
domain, and (2) initializing the hardware context for the domain.
Extract the code to initialize the hardware context into a new subroutine
ipmmu_domain_setup_context(), to prepare for later reuse.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The maximum number of micro-TLBs per IPMMU instance is not fixed, but
depends on the SoC type. Hence move it from struct ipmmu_vmsa_device to
struct ipmmu_features, and set up the correct value for both R-Car Gen2
and Gen3 SoCs.
Note that currently no code uses this value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make the IPMMU_CTX_MAX constant unsigned, to match the type of
ipmmu_features.number_of_contexts.
This allows to use plain min() instead of type-casting min_t().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On R-Car Gen3, the faulting virtual address is a 40-bit address, and
comprised of two registers. Read the upper address part, and combine
both parts, when running on a 64-bit system.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As of commit 7af9a5fdb9 ("iommu/ipmmu-vmsa: Use
iommu_device_sysfs_add()/remove()"), IOMMU devices show up under
/sys/class/iommu/, but their "devices" subdirectories are empty.
Likewise, devices tied to an IOMMU do not have an "iommu" backlink.
Make sure all links are created, on both arm32 and arm64.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Clang warns:
drivers/iommu/dma-iommu.c:897:6: warning: logical not is only applied to
the left hand side of this comparison [-Wlogical-not-parentheses]
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
^ ~~
drivers/iommu/dma-iommu.c:897:6: note: add parentheses after the '!' to
evaluate the comparison first
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
^
( )
drivers/iommu/dma-iommu.c:897:6: note: add parentheses around left hand
side expression to silence this warning
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
^
( )
1 warning generated.
Judging from the rest of the commit and the conditional in
iommu_dma_map_sg, either
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
or
if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
was intended, not a combination of the two.
I personally think that the former is easier to understand so use that.
Fixes: 06d60728ff ("iommu/dma: move the arm64 wrappers to common code")
Link: https://github.com/ClangBuiltLinux/linux/issues/497
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit "iommu/vt-d: Delegate the dma domain to upper layer" left an
unused variable,
drivers/iommu/intel-iommu.c: In function 'disable_dmar_iommu':
drivers/iommu/intel-iommu.c:1652:23: warning: variable 'domain' set but
not used [-Wunused-but-set-variable]
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit cf04eee8bf ("iommu/vt-d: Include ACPI devices in iommu=pt")
added for_each_active_iommu() in iommu_prepare_static_identity_mapping()
but never used the each element, i.e, "drhd->iommu".
drivers/iommu/intel-iommu.c: In function
'iommu_prepare_static_identity_mapping':
drivers/iommu/intel-iommu.c:3037:22: warning: variable 'iommu' set but
not used [-Wunused-but-set-variable]
struct intel_iommu *iommu;
Fixed the warning by appending a compiler attribute __maybe_unused for it.
Link: http://lkml.kernel.org/r/20190523013314.2732-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/iommu/amd_iommu.c: In function 'iommu_print_event':
drivers/iommu/amd_iommu.c:550:33: warning:
variable 'tag' set but not used [-Wunused-but-set-variable]
It was introduced in
e7f63ffc1b ("iommu/amd: Update logging information for new event type")
seems just missed in the error message, add it as suggested by Joerg.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The code to prepare the static identity map for various reserved
memory ranges in intel_iommu_init() is duplicated with the default
domain mechanism now. Remove it to avoid duplication.
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu generic code has handled the device hotplug cases.
Remove the duplicated code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It isn't used anywhere. Remove it to make code concise.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Previously, get_valid_domain_for_dev() is used to retrieve the
DMA domain which has been attached to the device or allocate one
if no domain has been attached yet. As we have delegated the DMA
domain management to upper layer, this function is used purely to
allocate a private DMA domain if the default domain doesn't work
for ths device. Cleanup the code for readability.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As a domain is now attached to a device earlier, we should
implement the is_attach_deferred call-back and use it to
defer the domain attach from iommu driver init to device
driver init when iommu is pre-enabled in kdump kernel.
Suggested-by: Tom Murphy <tmurphy@arista.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some platforms may support ACPI name-space enumerated devices
that are capable of generating DMA requests. Platforms which
support DMA remapping explicitly declares any such DMA-capable
ACPI name-space devices in the platform through ACPI Name-space
Device Declaration (ANDD) structure and enumerate them through
the Device Scope of the appropriate remapping hardware unit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu driver doesn't know whether the bit width of a PCI
device is sufficient for access to the whole system memory.
Hence, the driver checks this when the driver calls into the
dma APIs. If a device is using an identity domain, but the
bit width is less than the system requirement, we need to use
a dma domain instead. This also applies after we delegated
the domain life cycle management to the upper layer.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When we put a device into an iommu group, the group's default
domain will be attached to the device. There are some corner
cases where the type (identity or dma) of the default domain
doesn't work for the device and the request of a new default
domain results in failure (e.x. multiple devices have already
existed in the group). In order to be compatible with the past,
we used a private domain. Mark the private domains and disallow
some iommu apis (map/unmap/iova_to_phys) on them.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the iommu generic layer to allocate a dma domain and
attach it to a device through the iommu api's. With all types of
domains being delegated to upper layer, we can remove an internal
flag which was used to distinguish domains mananged internally or
externally.
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the iommu generic layer to allocate an identity domain
and attach it to a device. Hence, the identity domain is delegated
to upper layer. As a side effect, iommu_identity_mapping can't be
used to check the existence of identity domains any more.
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This helper returns the default domain type that the device
requires.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The rmrr devices require identity map of the rmrr regions before
enabling DMA remapping. Otherwise, there will be a window during
which DMA from/to the rmrr regions will be blocked. In order to
alleviate this, we move enabling DMA remapping after all rmrr
regions get mapped.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support mapping ISA region via iommu_group_create_direct_mappings,
make sure its exposed by iommu_get_resv_regions.
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For entirely dma coherent architectures there is no requirement to ever
remap dma coherent allocation. Move all the remap and pool code under
IS_ENABLED() checks and drop the Kconfig dependency.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Inline __iommu_dma_mmap_pfn into the main function, and use the
fact that __iommu_dma_get_pages return NULL for remapped contigous
allocations to simplify the code flow a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Inline __iommu_dma_get_sgtable_page into the main function, and use the
fact that __iommu_dma_get_pages return NULL for remapped contigous
allocations to simplify the code flow a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All the logic in iommu_dma_alloc that deals with page allocation from
the CMA or page allocators can be split into a self-contained helper,
and we can than map the result of that or the atomic pool allocation
with the iommu later. This also allows reusing __iommu_dma_free to
tear down the allocations and MMU mappings when the IOMMU mapping
fails.
Based on a patch from Robin Murphy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Most importantly clear up the size / iosize confusion. Also rename addr
to cpu_addr to match the surrounding code and make the intention a little
more clear.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Most of it can double up to serve the failure cleanup path for
iommu_dma_alloc().
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of having a separate code path for the non-blocking alloc_pages
and CMA allocations paths merge them into one. There is a slight
behavior change here in that we try the page allocator if CMA fails.
This matches what dma-direct and other iommu drivers do and will be
needed to use the dma-iommu code on architectures without DMA remapping
later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Always remapping CMA allocations was largely a bodge to keep the freeing
logic manageable when it was split between here and an arch wrapper. Now
that it's all together and streamlined, we can relax that limitation.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Shuffle around the self-contained atomic and non-contiguous cases to
return early and get out of the way of the CMA case that we're about to
work on next.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[hch: slight changes to the code flow]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The freeing logic was made particularly horrible by part of it being
opaque to the arch wrapper, which led to a lot of convoluted repetition
to ensure each path did everything in the right order. Now that it's
all private, we can pick apart and consolidate the logically-distinct
steps of freeing the IOMMU mapping, the underlying pages, and the CPU
remap (if necessary) into something much more manageable.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[various cosmetic changes to the code flow]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We only have a single caller of this function left, so open code it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the call to dma_common_pages_remap into __iommu_dma_alloc and
rename it to iommu_dma_alloc_remap. This creates a self-contained
helper for remapped pages allocation and mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we duplicate the find_vm_area() logic a few times in places where
we only care aboute the pages, factor out a helper to abstract it.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[hch: don't warn when not finding a region, as we'll rely on that later]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The remaining internal callsites don't care about having prototypes
compatible with the relevant dma_map_ops callbacks, so the extra
level of indirection just wastes space and complictaes things.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Most of the callers don't care, and the couple that do already have the
domain to hand for other reasons are in slow paths where the (trivial)
overhead of a repeated lookup will be utterly immaterial.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[hch: dropped the hunk touching iommu_dma_get_msi_page to avoid a
conflict with another series]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Moving this function up to its unmap counterpart helps to keep related
code together for the following changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is nothing really arm64 specific in the iommu_dma_ops
implementation, so move it to dma-iommu.c and keep a lot of symbols
self-contained. Note the implementation does depend on the
DMA_DIRECT_REMAP infrastructure for now, so we'll have to make the
DMA_IOMMU support depend on it, but this will be relaxed soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
arch_dma_prep_coherent can handle physically contiguous ranges larger
than PAGE_SIZE just fine, which means we don't need a page-based
iterator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We now have a arch_dma_prep_coherent architecture hook that is used
for the generic DMA remap allocator, and we should use the same
interface for the dma-iommu code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Used by iommu.c before creating identity mappings for reserved
ranges to ensure dma-ops won't ever remap these ranges.
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Normally during iommu probing a device, a default doamin will
be allocated and attached to the device. The domain type of
the default domain is statically defined, which results in a
situation where the allocated default domain isn't suitable
for the device due to some limitations. We already have API
iommu_request_dm_for_dev() to replace a DMA domain with an
identity one. This adds iommu_request_dma_domain_for_dev()
to request a dma domain if an allocated identity domain isn't
suitable for the device in question.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Set the page walk snoop to the right bit, otherwise the domain
id field will be overlapped.
Reported-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 6f7db75e1c ("iommu/vt-d: Add second level page table interface")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Lockdep debug reported lock inversion related with the iommu code
caused by dmar_insert_one_dev_info() grabbing the iommu->lock and
the device_domain_lock out of order versus the code path in
iommu_flush_dev_iotlb(). Expanding the scope of the iommu->lock and
reversing the order of lock acquisition fixes the issue.
[ 76.238180] dsa_bus wq0.0: dsa wq wq0.0 disabled
[ 76.248706]
[ 76.250486] ========================================================
[ 76.257113] WARNING: possible irq lock inversion dependency detected
[ 76.263736] 5.1.0-rc5+ #162 Not tainted
[ 76.267854] --------------------------------------------------------
[ 76.274485] systemd-journal/521 just changed the state of lock:
[ 76.280685] 0000000055b330f5 (device_domain_lock){..-.}, at: iommu_flush_dev_iotlb.part.63+0x29/0x90
[ 76.290099] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 76.297093] (&(&iommu->lock)->rlock){+.+.}
[ 76.297094]
[ 76.297094]
[ 76.297094] and interrupts could create inverse lock ordering between them.
[ 76.297094]
[ 76.314257]
[ 76.314257] other info that might help us debug this:
[ 76.321448] Possible interrupt unsafe locking scenario:
[ 76.321448]
[ 76.328907] CPU0 CPU1
[ 76.333777] ---- ----
[ 76.338642] lock(&(&iommu->lock)->rlock);
[ 76.343165] local_irq_disable();
[ 76.349422] lock(device_domain_lock);
[ 76.356116] lock(&(&iommu->lock)->rlock);
[ 76.363154] <Interrupt>
[ 76.366134] lock(device_domain_lock);
[ 76.370548]
[ 76.370548] *** DEADLOCK ***
Fixes: 745f2586e7 ("iommu/vt-d: Simplify function get_domain_for_dev()")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu_group_get_for_dev() will allocate a group for a
device if it isn't in any group. This isn't the use case
in iommu_request_dm_for_dev(). Let's use iommu_group_get()
instead.
Fixes: d290f1e70d ("iommu: Introduce iommu_request_dm_for_dev()")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A DMAR table walk would typically follow the below process.
1. Bus number is used to index into root table which points to a context
table.
2. Device number and Function number are used together to index into
context table which then points to a pasid directory.
3. PASID[19:6] is used to index into PASID directory which points to a
PASID table.
4. PASID[5:0] is used to index into PASID table which points to all levels
of page tables.
Whenever a user opens the file
"/sys/kernel/debug/iommu/intel/dmar_translation_struct", the above
described DMAR table walk is performed and the contents of the table are
dumped into the file. The dump could be handy while dealing with devices
that use PASID.
Example of such dump:
cat /sys/kernel/debug/iommu/intel/dmar_translation_struct
(Please note that because of 80 char limit, entries that should have been
in the same line are broken into different lines)
IOMMU dmar0: Root Table Address: 0x436f7c000
B.D.F Root_entry Context_entry
PASID PASID_table_entry
00:0a.0 0x0000000000000000:0x000000044dd3f001 0x0000000000100000:0x0000000435460e1d
0 0x000000044d6e1089:0x0000000000000003:0x0000000000000001
00:0a.0 0x0000000000000000:0x000000044dd3f001 0x0000000000100000:0x0000000435460e1d
1 0x0000000000000049:0x0000000000000001:0x0000000003c0e001
Note that the above format is followed even for legacy DMAR table dump
which doesn't support PASID and hence in such cases PASID is defaulted to
-1 indicating that PASID and it's related fields are invalid.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A scalable mode DMAR table walk would involve looking at bits in each stage
of walk, like,
1. Is PASID enabled in the context entry?
2. What's the size of PASID directory?
3. Is the PASID directory entry present?
4. Is the PASID table entry present?
5. Number of PASID table entries?
Hence, add these macros that will later be used during this walk.
Apart from adding new macros, move existing macros (like
pasid_pde_is_present(), get_pasid_table_from_pde() and pasid_supported())
to appropriate header files so that they could be reused.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Presently, "/sys/kernel/debug/iommu/intel/dmar_translation_struct" file
dumps DMAR tables in the below format
IOMMU dmar2: Root Table Address:4362cc000
Root Table Entries:
Bus: 0 H: 0 L: 4362f0001
Context Table Entries for Bus: 0
Entry B:D.F High Low
160 00:14.0 102 4362ef001
184 00:17.0 302 435ec4001
248 00:1f.0 202 436300001
This format has few short comings like
1. When extended for dumping scalable mode DMAR table it will quickly be
very clumsy, making it unreadable.
2. It has information like the Bus number and Entry which are basically
part of B:D.F, hence are a repetition and are not so useful.
So, change it to a new format which could be easily extended to dump
scalable mode DMAR table. The new format looks as below:
IOMMU dmar2: Root Table Address: 0x436f7d000
B.D.F Root_entry Context_entry
00:14.0 0x0000000000000000:0x0000000436fbd001 0x0000000000000102:0x0000000436fbc001
00:17.0 0x0000000000000000:0x0000000436fbd001 0x0000000000000302:0x0000000436af4001
00:1f.0 0x0000000000000000:0x0000000436fbd001 0x0000000000000202:0x0000000436fcd001
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
So that all types are printed in the same format.
Fixes: c52c72d3de ("iommu: Add sysfs attribyte for domain type")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We use RCU's for rarely updated lists like iommus, rmrr, atsr units.
I'm not sure why domain_remove_dev_info() in domain_exit() was surrounded
by rcu_read_lock. Lock was present before refactoring in d160aca527,
but it was related to rcu list, not domain_remove_dev_info function.
dmar_remove_one_dev_info() doesn't touch any of those lists, so it doesn't
require a lock. In fact it is called 6 times without it anyway.
Fixes: d160aca527 ("iommu/vt-d: Unify domain->iommu attach/detachment")
Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The variable npages is being initialized however this is never read and
later it is being reassigned to a new value. The initialization is
redundant and hence can be removed.
Addresses-Coverity: ("Unused Value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If multiple devices try to bind to the same mm/PASID, we need to
set up first level PASID entries for all the devices. The current
code does not consider this case which results in failed DMA for
devices after the first bind.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reported-by: Mike Campin <mike.campin@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull IRQ chip updates from Ingo Molnar:
"A late irqchips update:
- New TI INTR/INTA set of drivers
- Rewrite of the stm32mp1-exti driver as a platform driver
- Update the IOMMU MSI mapping API to be RT friendly
- A number of cleanups and other low impact fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
arm64: arch_k3: Enable interrupt controller drivers
irqchip/ti-sci-inta: Add msi domain support
soc: ti: Add MSI domain bus support for Interrupt Aggregator
irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
irqchip/ti-sci-intr: Add support for Interrupt Router driver
dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
gpio: thunderx: Use the default parent apis for {request,release}_resources
genirq: Introduce irq_chip_{request,release}_resource_parent() apis
firmware: ti_sci: Add helper apis to manage resources
firmware: ti_sci: Add RM mapping table for am654
firmware: ti_sci: Add support for IRQ management
firmware: ti_sci: Add support for RM core ops
...
Since commit dccd2304cc ("ARM: 7430/1: sizes.h: move from asm-generic
to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just
wrappers of <linux/sizes.h>.
This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to
prepare for the removal.
Link: http://lkml.kernel.org/r/1553267665-27228-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including:
- ATS support for ARM-SMMU-v3.
- AUX domain support in the IOMMU-API and the Intel VT-d driver.
This adds support for multiple DMA address spaces per
(PCI-)device. The use-case is to multiplex devices between
host and KVM guests in a more flexible way than supported by
SR-IOV.
- The Rest are smaller cleanups and fixes, two of which needed
to be reverted after testing in linux-next.
-----BEGIN PGP SIGNATURE-----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=HLtu
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- ATS support for ARM-SMMU-v3.
- AUX domain support in the IOMMU-API and the Intel VT-d driver. This
adds support for multiple DMA address spaces per (PCI-)device. The
use-case is to multiplex devices between host and KVM guests in a
more flexible way than supported by SR-IOV.
- the rest are smaller cleanups and fixes, two of which needed to be
reverted after testing in linux-next.
* tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (45 commits)
Revert "iommu/amd: Flush not present cache in iommu_map_page"
Revert "iommu/amd: Remove the leftover of bypass support"
iommu/vt-d: Fix leak in intel_pasid_alloc_table on error path
iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU
iommu/vt-d: Set intel_iommu_gfx_mapped correctly
iommu/amd: Flush not present cache in iommu_map_page
iommu/vt-d: Cleanup: no spaces at the start of a line
iommu/vt-d: Don't request page request irq under dmar_global_lock
iommu/vt-d: Use struct_size() helper
iommu/mediatek: Fix leaked of_node references
iommu/amd: Remove amd_iommu_pd_list
iommu/arm-smmu: Log CBFRSYNRA register on context fault
iommu/arm-smmu-v3: Don't disable SMMU in kdump kernel
iommu/arm-smmu-v3: Disable tagged pointers
iommu/arm-smmu-v3: Add support for PCI ATS
iommu/arm-smmu-v3: Link domains and devices
iommu/arm-smmu-v3: Add a master->domain pointer
iommu/arm-smmu-v3: Store SteamIDs in master
iommu/arm-smmu-v3: Rename arm_smmu_master_data to arm_smmu_master
ACPI/IORT: Check ATS capability in root complex nodes
...
This reverts commit 1a1079011d.
This commit caused a NULL-ptr deference bug and must be
reverted for now.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The dma_ranges list field of PCI host bridge structure has resource entries
in sorted order representing address ranges allowed for DMA transfers.
Process the list and reserve IOVA addresses that are not present in its
resource entries (ie DMA memory holes) to prevent allocating IOVA addresses
that cannot be accessed by PCI devices.
Based-on-a-patch-by: Oza Pawandeep <oza.oza@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oza Pawandeep <poza@codeaurora.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
This reverts commit 7a5dbf3ab2.
This commit not only removes the leftovers of bypass
support, it also mostly removes the checking of the return
value of the get_domain() function. This can lead to silent
data corruption bugs when a device is not attached to its
dma_ops domain and a DMA-API function is called for that
device.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If alloc_pages_node() fails, pasid_table is leaked. Free it.
Fixes: cc580e4126 ("iommu/vt-d: Per PCI device pasid table interfaces")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The kernel parameter igfx_off is used by users to disable
DMA remapping for the Intel integrated graphic device. It
was designed for bare metal cases where a dedicated IOMMU
is used for graphic. This doesn't apply to virtual IOMMU
case where an include-all IOMMU is used. This makes the
kernel parameter work with virtual IOMMU as well.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Fixes: c0771df8d5 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The intel_iommu_gfx_mapped flag is exported by the Intel
IOMMU driver to indicate whether an IOMMU is used for the
graphic device. In a virtualized IOMMU environment (e.g.
QEMU), an include-all IOMMU is used for graphic device.
This flag is found to be clear even the IOMMU is used.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Fixes: c0771df8d5 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
check if there is a not-present cache present and flush it if there is.
Signed-off-by: Tom Murphy <tmurphy@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Replace the whitespaces at the start of a line with tabs. No
functional changes.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A recent change split iommu_dma_map_msi_msg() in two new functions. The
function was still implemented to avoid modifying all the callers at
once.
Now that all the callers have been reworked, iommu_dma_map_msi_msg() can
be removed.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On RT, iommu_dma_map_msi_msg() may be called from non-preemptible
context. This will lead to a splat with CONFIG_DEBUG_ATOMIC_SLEEP as
the function is using spin_lock (they can sleep on RT).
iommu_dma_map_msi_msg() is used to map the MSI page in the IOMMU PT
and update the MSI message with the IOVA.
Only the part to lookup for the MSI page requires to be called in
preemptible context. As the MSI page cannot change over the lifecycle
of the MSI interrupt, the lookup can be cached and re-used later on.
iomma_dma_map_msi_msg() is now split in two functions:
- iommu_dma_prepare_msi(): This function will prepare the mapping
in the IOMMU and store the cookie in the structure msi_desc. This
function should be called in preemptible context.
- iommu_dma_compose_msi_msg(): This function will update the MSI
message with the IOVA when the device is behind an IOMMU.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Use new helper pci_dev_id() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Use new helper pci_dev_id() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, replace code of the following form:
size = sizeof(*info) + level * sizeof(info->path[0]);
with:
size = struct_size(info, path, level);
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
581 static int mtk_iommu_probe(struct platform_device *pdev)
582 {
...
626 for (i = 0; i < larb_nr; i++) {
627 struct device_node *larbnode;
...
631 larbnode = of_parse_phandle(...);
632 if (!larbnode)
633 return -EINVAL;
634
635 if (!of_device_is_available(larbnode))
636 continue; ---> leaked here
637
...
643 if (!plarbdev)
644 return -EPROBE_DEFER; ---> leaked here
...
647 component_match_add_release(dev, &match, release_of,
648 compare_of, larbnode);
---> release_of will call of_node_put
649 }
...
650
Detected by coccinelle with the following warnings:
./drivers/iommu/mtk_iommu.c:644:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 631, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This variable hold a global list of allocated protection
domains in the AMD IOMMU driver. By now this list is never
traversed anymore, so the list and the lock protecting it
can be removed.
Cc: Tom Murphy <tmurphy@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.
Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains
Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.
Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.
-----BEGIN PGP SIGNATURE-----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=7Hyr
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-04-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.2:
UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.
Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains
Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.
Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/737ad994-213d-45b5-207a-b99d795acd21@linux.intel.com
Bits[15:0] in CBFRSYNRA register contain information about
StreamID of the incoming transaction that generated the
fault. Dump CBFRSYNRA register to get this info.
This is specially useful in a distributed SMMU architecture
where multiple masters are connected to the SMMU.
SID information helps to quickly identify the faulting
master device.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Disabling the SMMU when probing from within a kdump kernel so that all
incoming transactions are terminated can prevent the core of the crashed
kernel from being transferred off the machine if all I/O devices are
behind the SMMU.
Instead, continue to probe the SMMU after it is disabled so that we can
reinitialise it entirely and re-attach the DMA masters as they are reset.
Since the kdump kernel may not have drivers for all of the active DMA
masters, we suppress fault reporting to avoid spamming the console and
swamping the IRQ threads.
Reported-by: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
Tested-by: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM architecture has a "Top Byte Ignore" (TBI) option that makes the
MMU mask out bits [63:56] of an address, allowing a userspace application
to store data in its pointers. This option is incompatible with PCI ATS.
If TBI is enabled in the SMMU and userspace triggers DMA transactions on
tagged pointers, the endpoint might create ATC entries for addresses that
include a tag. Software would then have to send ATC invalidation packets
for each 255 possible alias of an address, or just wipe the whole address
space. This is not a viable option, so disable TBI.
The impact of this change is unclear, since there are very few users of
tagged pointers, much less SVA. But the requirement introduced by this
patch doesn't seem excessive: a userspace application using both tagged
pointers and SVA should now sanitize addresses (clear the tag) before
using them for device DMA.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
PCIe devices can implement their own TLB, named Address Translation Cache
(ATC). Enable Address Translation Service (ATS) for devices that support
it and send them invalidation requests whenever we invalidate the IOTLBs.
ATC invalidation is allowed to take up to 90 seconds, according to the
PCIe spec, so it is possible to get a SMMU command queue timeout during
normal operations. However we expect implementations to complete
invalidation in reasonable time.
We only enable ATS for "trusted" devices, and currently rely on the
pci_dev->untrusted bit. For ATS we have to trust that:
(a) The device doesn't issue "translated" memory requests for addresses
that weren't returned by the SMMU in a Translation Completion. In
particular, if we give control of a device or device partition to a VM
or userspace, software cannot program the device to access arbitrary
"translated" addresses.
(b) The device follows permissions granted by the SMMU in a Translation
Completion. If the device requested read+write permission and only
got read, then it doesn't write.
(c) The device doesn't send Translated transactions for an address that
was invalidated by an ATC invalidation.
Note that the PCIe specification explicitly requires all of these, so we
can assume that implementations will cleanly shield ATCs from software.
All ATS translated requests still go through the SMMU, to walk the stream
table and check that the device is actually allowed to send translated
requests.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When removing a mapping from a domain, we need to send an invalidation to
all devices that might have stored it in their Address Translation Cache
(ATC). In addition when updating the context descriptor of a live domain,
we'll need to send invalidations for all devices attached to it.
Maintain a list of devices in each domain, protected by a spinlock. It is
updated every time we attach or detach devices to and from domains.
It needs to be a spinlock because we'll invalidate ATC entries from
within hardirq-safe contexts, but it may be possible to relax the read
side with RCU later.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As we're going to track domain-master links more closely for ATS and CD
invalidation, add pointer to the attached domain in struct
arm_smmu_master. As a result, arm_smmu_strtab_ent is redundant and can be
removed.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Simplify the attach/detach code a bit by keeping a pointer to the stream
IDs in the master structure. Although not completely obvious here, it does
make the subsequent support for ATS, PRI and PASID a bit simpler.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The arm_smmu_master_data structure already represents more than just the
firmware data associated to a master, and will be used extensively to
represent a device's state when implementing more SMMU features. Rename
the structure to arm_smmu_master.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
ARM Mali midgard GPU is similar to standard 64-bit stage 1 page tables, but
have a few differences. Add a new format type to represent the format. The
input address size is 48-bits and the output address size is 40-bits (and
possibly less?). Note that the later bifrost GPUs follow the standard
64-bit stage 1 format.
The differences in the format compared to 64-bit stage 1 format are:
The 3rd level page entry bits are 0x1 instead of 0x3 for page entries.
The access flags are not read-only and unprivileged, but read and write.
This is similar to stage 2 entries, but the memory attributes field matches
stage 1 being an index.
The nG bit is not set by the vendor driver. This one didn't seem to matter,
but we'll keep it aligned to the vendor driver.
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-2-robh@kernel.org
By default, for performance consideration, Intel IOMMU
driver won't flush IOTLB immediately after a buffer is
unmapped. It schedules a thread and flushes IOTLB in a
batched mode. This isn't suitable for untrusted device
since it still can access the memory even if it isn't
supposed to do so.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Xu Pengfei <pengfei.xu@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The exlcusion range limit register needs to contain the
base-address of the last page that is part of the range, as
bits 0-11 of this register are treated as 0xfff by the
hardware for comparisons.
So correctly set the exclusion range in the hardware to the
last page which is _in_ the range.
Fixes: b2026aa2dc ('x86, AMD IOMMU: add functions for programming IOMMU MMIO space')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The intel-iommu driver currently has a partial reimplementation
of the direct mapping code for devices that use pass through
mode. Replace that code with calls to the relevant dma_direct
routines at the highest level. This means we have exactly the
same behvior as the dma direct code itself, and can prepare for
eventually only attaching the intel_iommu ops to devices that
actually need dynamic iommu mappings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Invert the return value to avoid double negatives, use a bool
instead of int as the return value, and reduce some indentation
after early returns.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The AMD iommu dma_ops are only attached on a per-device basis when an
actual translation is needed. Remove the leftover bypass support which
in parts was already broken (e.g. it always returns 0 from ->map_sg).
Use the opportunity to remove a few local variables and move assignments
into the declaration line where they were previously separated by the
bypass check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit e5567f5f67 ("PCI/ATS: Add pci_prg_resp_pasid_required()
interface.") added a common interface to check the PASID bit in the PRI
capability. Use it in the AMD driver.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds support to return the default pasid associated with
an auxiliary domain. The PCI device which is bound with this
domain should use this value as the pasid for all DMA requests
of the subset of device which is isolated and protected with
this domain.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When multiple domains per device has been enabled by the
device driver, the device will tag the default PASID for
the domain to all DMA traffics out of the subset of this
device; and the IOMMU should translate the DMA requests
in PASID granularity.
This adds the intel_iommu_aux_attach/detach_device() ops
to support managing PASID granular translation structures
when the device driver has enabled multiple domains per
device.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This part of code could be used by both normal and aux
domain specific attach entries. Hence move them into a
common function to avoid duplication.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds the iommu ops entries for aux-domain per-device
feature query and enable/disable.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This moves intel_iommu_enable_pasid() out of the scope of
CONFIG_INTEL_IOMMU_SVM with more and more features requiring
pasid function.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add bind() and unbind() operations to the IOMMU API.
iommu_sva_bind_device() binds a device to an mm, and returns a handle to
the bond, which is released by calling iommu_sva_unbind_device().
Each mm bound to devices gets a PASID (by convention, a 20-bit system-wide
ID representing the address space), which can be retrieved with
iommu_sva_get_pasid(). When programming DMA addresses, device drivers
include this PASID in a device-specific manner, to let the device access
the given address space. Since the process memory may be paged out, device
and IOMMU must support I/O page faults (e.g. PCI PRI).
Using iommu_sva_set_ops(), device drivers provide an mm_exit() callback
that is called by the IOMMU driver if the process exits before the device
driver called unbind(). In mm_exit(), device driver should disable DMA
from the given context, so that the core IOMMU can reallocate the PASID.
Whether the process exited or nor, the device driver should always release
the handle with unbind().
To use these functions, device driver must first enable the
IOMMU_DEV_FEAT_SVA device feature with iommu_dev_enable_feature().
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Sharing a physical PCI device in a finer-granularity way
is becoming a consensus in the industry. IOMMU vendors
are also engaging efforts to support such sharing as well
as possible. Among the efforts, the capability of support
finer-granularity DMA isolation is a common requirement
due to the security consideration. With finer-granularity
DMA isolation, subsets of a PCI function can be isolated
from each others by the IOMMU. As a result, there is a
request in software to attach multiple domains to a physical
PCI device. One example of such use model is the Intel
Scalable IOV [1] [2]. The Intel vt-d 3.0 spec [3] introduces
the scalable mode which enables PASID granularity DMA
isolation.
This adds the APIs to support multiple domains per device.
In order to ease the discussions, we call it 'a domain in
auxiliary mode' or simply 'auxiliary domain' when multiple
domains are attached to a physical device.
The APIs include:
* iommu_dev_has_feature(dev, IOMMU_DEV_FEAT_AUX)
- Detect both IOMMU and PCI endpoint devices supporting
the feature (aux-domain here) without the host driver
dependency.
* iommu_dev_feature_enabled(dev, IOMMU_DEV_FEAT_AUX)
- Check the enabling status of the feature (aux-domain
here). The aux-domain interfaces are available only
if this returns true.
* iommu_dev_enable/disable_feature(dev, IOMMU_DEV_FEAT_AUX)
- Enable/disable device specific aux-domain feature.
* iommu_aux_attach_device(domain, dev)
- Attaches @domain to @dev in the auxiliary mode. Multiple
domains could be attached to a single device in the
auxiliary mode with each domain representing an isolated
address space for an assignable subset of the device.
* iommu_aux_detach_device(domain, dev)
- Detach @domain which has been attached to @dev in the
auxiliary mode.
* iommu_aux_get_pasid(domain, dev)
- Return ID used for finer-granularity DMA translation.
For the Intel Scalable IOV usage model, this will be
a PASID. The device which supports Scalable IOV needs
to write this ID to the device register so that DMA
requests could be tagged with a right PASID prefix.
This has been updated with the latest proposal from Joerg
posted here [5].
Many people involved in discussions of this design.
Kevin Tian <kevin.tian@intel.com>
Liu Yi L <yi.l.liu@intel.com>
Ashok Raj <ashok.raj@intel.com>
Sanjay Kumar <sanjay.k.kumar@intel.com>
Jacob Pan <jacob.jun.pan@linux.intel.com>
Alex Williamson <alex.williamson@redhat.com>
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Joerg Roedel <joro@8bytes.org>
and some discussions can be found here [4] [5].
[1] https://software.intel.com/en-us/download/intel-scalable-io-virtualization-technical-specification
[2] https://schd.ws/hosted_files/lc32018/00/LC3-SIOV-final.pdf
[3] https://software.intel.com/en-us/download/intel-virtualization-technology-for-directed-io-architecture-specification
[4] https://lkml.org/lkml/2018/7/26/4
[5] https://www.spinics.net/lists/iommu/msg31874.html
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Suggested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Set PTE read/write attributes accordingly to the the protections requested
by IOMMU API.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Release all memory allocations associated with a released domain and emit
warning if domain is in-use at the time of destruction.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of
the TLB_FLUSH register differs from later Tegra generations that have 128
ASID's.
In a result the PTE's are now flushed correctly from TLB and this fixes
problems with graphics (randomly failing tests) on Tegra30.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If you're bisecting why your peripherals stopped working, it's
probably this CL. Specifically if you see this in your dmesg:
Unexpected global fault, this could be serious
...then it's almost certainly this CL.
Running your IOMMU-enabled peripherals with the IOMMU in bypass mode
is insecure and effectively disables the protection they provide.
There are few reasons to allow unmatched stream bypass, and even fewer
good ones.
This patch starts the transition over to make it much harder to run
your system insecurely. Expected steps:
1. By default disable bypass (so anyone insecure will notice) but make
it easy for someone to re-enable bypass with just a KConfig change.
That's this patch.
2. After people have had a little time to come to grips with the fact
that they need to set their IOMMUs properly and have had time to
dig into how to do this, the KConfig will be eliminated and bypass
will simply be disabled. Folks who are truly upset and still
haven't fixed their system can either figure out how to add
'arm-smmu.disable_bypass=n' to their command line or revert the
patch in their own private kernel. Of course these folks will be
less secure.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Merge misc fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links
fs: fs_parser: fix printk format warning
checkpatch: add %pt as a valid vsprintf extension
mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate
drivers/block/zram/zram_drv.c: fix idle/writeback string compare
mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate()
mm/memory_hotplug.c: fix notification in offline error path
ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK
fs/proc/kcore.c: make kcore_modules static
include/linux/list.h: fix list_is_first() kernel-doc
mm/debug.c: fix __dump_page when mapping->host is not set
mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
include/linux/hugetlb.h: convert to use vm_fault_t
iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging
mm: add support for kmem caches in DMA32 zone
ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock
mm/hotplug: fix offline undo_isolate_page_range()
fs/open.c: allow opening only regular files during execve()
mailmap: add Changbin Du
mm/debug.c: add a cast to u64 for atomic64_read()
...
IOMMUs using ARMv7 short-descriptor format require page tables (level 1
and 2) to be allocated within the first 4GB of RAM, even on 64-bit
systems.
For level 1/2 pages, ensure GFP_DMA32 is used if CONFIG_ZONE_DMA32 is
defined (e.g. on arm64 platforms).
For level 2 pages, allocate a slab cache in SLAB_CACHE_DMA32. Note that
we do not explicitly pass GFP_DMA[32] to kmem_cache_zalloc, as this is
not strictly necessary, and would cause a warning in mm/sl*b.c, as we
did not update GFP_SLAB_BUG_MASK.
Also, print an error when the physical address does not fit in
32-bit, to make debugging easier in the future.
Link: http://lkml.kernel.org/r/20181210011504.122604-3-drinkcat@chromium.org
Fixes: ad67f5a654 ("arm64: replace ZONE_DMA with ZONE_DMA32")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Huaisheng Ye <yehs1@lenovo.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sasha Levin <Alexander.Levin@microsoft.com>
Cc: Tomasz Figa <tfiga@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a device has an exclusion range specified in the IVRS
table, this region needs to be reserved in the iova-domain
of that device. This hasn't happened until now and can cause
data corruption on data transfered with these devices.
Treat exclusion ranges as reserved regions in the iommu-core
to fix the problem.
Fixes: be2a022c0d ('x86, AMD IOMMU: add functions to parse IOMMU memory mapping requirements for devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
The iommu_callback_data is not used anywhere, remove it to make
the code more concise.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Print the warning about the fall-back to IOMMU_DOMAIN_DMA in
iommu_group_get_for_dev() only when such a domain was
actually allocated.
Otherwise the user will get misleading warnings in the
kernel log when the iommu driver used doesn't support
IOMMU_DOMAIN_DMA and IOMMU_DOMAIN_IDENTITY.
Fixes: fccb4e3b8a ('iommu: Allow default domain type to be set on the kernel command line')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The driver sets a default domain id (FLPT_DEFAULT_DID) in the
first level only pasid entry, but saves a different domain id
in @sdev->did. The value saved in @sdev->did will be used to
invalidate the translation caches. Hence, the driver might
result in invalidating the caches with a wrong domain id.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Fixes: 1c4f88b7f1 ("iommu/vt-d: Shared virtual address in scalable mode")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The spec states in 10.4.16 that the Protected Memory Enable
Register should be treated as read-only for implementations
not supporting protected memory regions (PLMR and PHMR fields
reported as Clear in the Capability register).
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: mark gross <mgross@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: f8bab73515 ("intel-iommu: PMEN support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If a 32 bit allocation request is too big to possibly succeed, it
early exits with a failure and then should never update max32_alloc_
size. This patch fixes current code, now the size is only updated if
the slow path failed while walking the tree. Without the fix the
allocation may enter the slow path again even if there was a failure
before of a request with the same or a smaller size.
Cc: <stable@vger.kernel.org> # 4.20+
Fixes: bee60e94a1 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Fix a NULL-pointer dereference issue in the ACPI device
matching code of the AMD IOMMU driver
-----BEGIN PGP SIGNATURE-----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=squ6
-----END PGP SIGNATURE-----
Merge tag 'iommu-fix-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Fix a NULL-pointer dereference issue in the ACPI device matching code
of the AMD IOMMU driver"
* tag 'iommu-fix-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix NULL dereference bug in match_hid_uid
Add a non-NULL check to fix potential NULL pointer dereference
Cleanup code to call function once.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 2bf9a0a127 ('iommu/amd: Add iommu support for ACPI HID devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- A big cleanup and optimization patch-set for the
Tegra GART driver
- Documentation updates and fixes for the IOMMU-API
- Support for page request in Intel VT-d scalable mode
- Intel VT-d dma_[un]map_resource() support
- Updates to the ATS enabling code for PCI (acked by Bjorn) and
Intel VT-d to align with the latest version of the ATS spec
- Relaxed IRQ source checking in the Intel VT-d driver for some
aliased devices, needed for future devices which send IRQ
messages from more than on request-ID
- IRQ remapping driver for Hyper-V
- Patches to make generic IOVA and IO-Page-Table code usable
outside of the IOMMU code
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=cKsD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- A big cleanup and optimization patch-set for the Tegra GART driver
- Documentation updates and fixes for the IOMMU-API
- Support for page request in Intel VT-d scalable mode
- Intel VT-d dma_[un]map_resource() support
- Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel
VT-d to align with the latest version of the ATS spec
- Relaxed IRQ source checking in the Intel VT-d driver for some aliased
devices, needed for future devices which send IRQ messages from more
than on request-ID
- IRQ remapping driver for Hyper-V
- Patches to make generic IOVA and IO-Page-Table code usable outside of
the IOMMU code
- Various other small fixes and cleanups
* tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
iommu/vt-d: Get domain ID before clear pasid entry
iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm()
iommu/vt-d: Set context field after value initialized
iommu/vt-d: Disable ATS support on untrusted devices
iommu/mediatek: Fix semicolon code style issue
MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope
iommu/hyper-v: Add Hyper-V stub IOMMU driver
x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available
PCI/ATS: Add inline to pci_prg_resp_pasid_required()
iommu/vt-d: Check identity map for hot-added devices
iommu: Fix IOMMU debugfs fallout
iommu: Document iommu_ops.is_attach_deferred()
iommu: Document iommu_ops.iotlb_sync_map()
iommu/vt-d: Enable ATS only if the device uses page aligned address.
PCI/ATS: Add pci_ats_page_aligned() interface
iommu/vt-d: Fix PRI/PASID dependency issue.
PCI/ATS: Add pci_prg_resp_pasid_required() interface.
iommu/vt-d: Allow interrupts from the entire bus for aliased devices
iommu/vt-d: Add helper to set an IRTE to verify only the bus number
iommu: Fix flush_tlb_all typo
...
Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
ep8g+6oRLxJy414hogxQ
=bLs2
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
driver core: platform: remove misleading err_alloc label
platform: set of_node in platform_device_register_full()
firmware: hardcode the debug message for -ENOENT
driver core: Add missing description of new struct device_link field
driver core: Fix PM-runtime for links added during consumer probe
drivers/component: kerneldoc polish
async: Add cmdline option to specify drivers to be async probed
driver core: Fix possible supplier PM-usage counter imbalance
PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
driver: platform: Support parsing GpioInt 0 in platform_get_irq()
selftests: firmware: fix verify_reqs() return value
Revert "selftests: firmware: remove use of non-standard diff -Z option"
Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
device: Fix comment for driver_data in struct device
kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
sysfs: remove unused include of kernfs-internal.h
driver core: Postpone DMA tear-down until after devres release
driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
PM-runtime: Take suppliers into account in __pm_runtime_set_status()
device.h: Add __cold to dev_<level> logging functions
...
Patch series "Replace all open encodings for NUMA_NO_NODE", v3.
All these places for replacement were found by running the following
grep patterns on the entire kernel code. Please let me know if this
might have missed some instances. This might also have replaced some
false positives. I will appreciate suggestions, inputs and review.
1. git grep "nid == -1"
2. git grep "node == -1"
3. git grep "nid = -1"
4. git grep "node = -1"
This patch (of 2):
At present there are multiple places where invalid node number is
encoded as -1. Even though implicitly understood it is always better to
have macros in there. Replace these open encodings for an invalid node
number with the global macro NUMA_NO_NODE. This helps remove NUMA
related assumptions like 'invalid node' from various places redirecting
them to a common definition.
Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe]
Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx]
Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband]
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One important patch:
- Fix for a memory corruption issue in the Intel VT-d driver
that triggers on hardware with deep PCI hierarchies
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=H9KF
-----END PGP SIGNATURE-----
Merge tag 'iommu-fix-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"One important fix for a memory corruption issue in the Intel VT-d
driver that triggers on hardware with deep PCI hierarchies"
* tag 'iommu-fix-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dmar: Fix buffer overflow during PCI bus notification
After tearing down a pasid entry, the domain id is used to
invalidate the translation caches. Retrieve the domain id
from the pasid entry value before clearing the pasid entry.
Otherwise, we will always use domain id 0.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Fixes: 6f7db75e1c ("iommu/vt-d: Add second level page table interface")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Intel IOMMU could be turned off with intel_iommu=off. If Intel
IOMMU is off, the intel_iommu struct will not be initialized.
When device drivers call intel_svm_bind_mm(), the NULL pointer
reference will happen there.
Add dmar_disabled check to avoid NULL pointer reference.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 2f26e0a9c9 ("iommu/vt-d: Add basic SVM PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Otherwise, the translation type field of a context entry for
a PCI device will always be 0. All translated DMA requests
will be blocked by IOMMU. As the result, the PCI devices with
PCI ATS (device IOTBL) support won't work as expected.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Fixes: 7373a8cc38 ("iommu/vt-d: Setup context and enable RID2PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit fb58fdcd29 ("iommu/vt-d: Do not enable ATS for untrusted
devices") disables ATS support on the devices which have been marked
as untrusted. Unfortunately this is not enough to fix the DMA attack
vulnerabiltiies because IOMMU driver allows translated requests as
long as a device advertises the ATS capability. Hence a malicious
peripheral device could use this to bypass IOMMU.
This disables the ATS support on untrusted devices by clearing the
internal per-device ATS mark. As the result, IOMMU driver will block
any translated requests from any device marked as untrusted.
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: fb58fdcd29 ("iommu/vt-d: Do not enable ATS for untrusted devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On the bare metal, enabling X2APIC mode requires interrupt remapping
function which helps to deliver irq to cpu with 32-bit APIC ID.
Hyper-V doesn't provide interrupt remapping function so far and Hyper-V
MSI protocol already supports to deliver interrupt to the CPU whose
virtual processor index is more than 255. IO-APIC interrupt still has
8-bit APIC ID limitation.
This patch is to add Hyper-V stub IOMMU driver in order to enable
X2APIC mode successfully in Hyper-V Linux guest. The driver returns X2APIC
interrupt remapping capability when X2APIC mode is available. Otherwise,
it creates a Hyper-V irq domain to limit IO-APIC interrupts' affinity
and make sure cpus assigned with IO-APIC interrupt have 8-bit APIC ID.
Define 24 IO-APIC remapping entries because Hyper-V only expose one
single IO-APIC and one IO-APIC has 24 pins according IO-APIC spec(
https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf).
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU driver will put devices into a static identity
mapped domain during boot if the kernel parameter "iommu=pt" is
used. That means the IOMMU hardware will translate a DMA address
into the same memory address.
Unfortunately, hot-added devices are not subject to this. That
results in some devices not working properly after hot added. A
quick way to reproduce this issue is to boot a system with
iommu=pt
and, remove then readd the pci device with
echo 1 > /sys/bus/pci/devices/[pci_source_id]/remove
echo 1 > /sys/bus/pci/rescan
You will find the identity mapped domain was replaced with a
normal domain.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: stable@vger.kernel.org
Reported-by: Jis Ben <jisben@google.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: James Dong <xmdong@google.com>
Fixes: 99dcadede4 ('intel-iommu: Support PCIe hot-plug')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 57384592c4 ("iommu/vt-d: Store bus information in RMRR PCI
device path") changed the type of the path data, however, the change in
path type was not reflected in size calculations. Update to use the
correct type and prevent a buffer overflow.
This bug manifests in systems with deep PCI hierarchies, and can lead to
an overflow of the static allocated buffer (dmar_pci_notify_info_buf),
or can lead to overflow of slab-allocated data.
BUG: KASAN: global-out-of-bounds in dmar_alloc_pci_notify_info+0x1d5/0x2e0
Write of size 1 at addr ffffffff90445d80 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.87-rt49-02406-gd0a0e96 #1
Call Trace:
? dump_stack+0x46/0x59
? print_address_description+0x1df/0x290
? dmar_alloc_pci_notify_info+0x1d5/0x2e0
? kasan_report+0x256/0x340
? dmar_alloc_pci_notify_info+0x1d5/0x2e0
? e820__memblock_setup+0xb0/0xb0
? dmar_dev_scope_init+0x424/0x48f
? __down_write_common+0x1ec/0x230
? dmar_dev_scope_init+0x48f/0x48f
? dmar_free_unused_resources+0x109/0x109
? cpumask_next+0x16/0x20
? __kmem_cache_create+0x392/0x430
? kmem_cache_create+0x135/0x2f0
? e820__memblock_setup+0xb0/0xb0
? intel_iommu_init+0x170/0x1848
? _raw_spin_unlock_irqrestore+0x32/0x60
? migrate_enable+0x27a/0x5b0
? sched_setattr+0x20/0x20
? migrate_disable+0x1fc/0x380
? task_rq_lock+0x170/0x170
? try_to_run_init_process+0x40/0x40
? locks_remove_file+0x85/0x2f0
? dev_prepare_static_identity_mapping+0x78/0x78
? rt_spin_unlock+0x39/0x50
? lockref_put_or_lock+0x2a/0x40
? dput+0x128/0x2f0
? __rcu_read_unlock+0x66/0x80
? __fput+0x250/0x300
? __rcu_read_lock+0x1b/0x30
? mntput_no_expire+0x38/0x290
? e820__memblock_setup+0xb0/0xb0
? pci_iommu_init+0x25/0x63
? pci_iommu_init+0x25/0x63
? do_one_initcall+0x7e/0x1c0
? initcall_blacklisted+0x120/0x120
? kernel_init_freeable+0x27b/0x307
? rest_init+0xd0/0xd0
? kernel_init+0xf/0x120
? rest_init+0xd0/0xd0
? ret_from_fork+0x1f/0x40
The buggy address belongs to the variable:
dmar_pci_notify_info_buf+0x40/0x60
Fixes: 57384592c4 ("iommu/vt-d: Store bus information in RMRR PCI device path")
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A change made in the final version of IOMMU debugfs support replaced the
public function iommu_debugfs_new_driver_dir() by the public dentry
iommu_debugfs_dir in <linux/iommu.h>, but forgot to update both the
implementation in iommu-debugfs.c, and the patch description.
Fix this by exporting iommu_debugfs_dir, and removing the reference to
and implementation of iommu_debugfs_new_driver_dir().
Fixes: bad614b242 ("iommu: Enable debugfs exposure of IOMMU driver internals")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As per Intel vt-d specification, Rev 3.0 (section 7.5.1.1, title "Page
Request Descriptor"), Intel IOMMU page request descriptor only uses
bits[63:12] of the page address. Hence Intel IOMMU driver would only
permit devices that advertise they would only send Page Aligned Requests
to participate in ATS service.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In Intel IOMMU, if the Page Request Queue (PRQ) is full, it will
automatically respond to the device with a success message as a keep
alive. And when sending the success message, IOMMU will include PASID in
the Response Message when the Page Request has a PASID in Request
Message and it does not check against the PRG Response PASID requirement
of the device before sending the response. Also, if the device receives
the PRG response with PASID when its not expecting it the device behavior
is undefined. So if PASID is enabled in the device, enable PRI only if
device expects PASID in PRG Response Message.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a device has multiple aliases that all are from the same bus,
we program the IRTE to accept requests from any matching device on the
bus.
This is so NTB devices which can have requests from multiple bus-devfns
can pass MSI interrupts through across the bridge.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current code uses set_irte_sid() with SVT_VERIFY_BUS and PCI_DEVID
to set the SID value. However, this is very confusing because, with
SVT_VERIFY_BUS, the SID value is not a PCI devfn address, but the start
and end bus numbers to match against.
According to the Intel Virtualization Technology for Directed I/O
Architecture Specification, Rev. 3.0, page 9-36:
The most significant 8-bits of the SID field contains the Startbus#,
and the least significant 8-bits of the SID field contains the Endbus#.
Interrupt requests that reference this IRTE must have a requester-id
whose bus# (most significant 8-bits of requester-id) has a value equal
to or within the Startbus# to Endbus# range.
So to make this more clear, introduce a new set_irte_verify_bus() that
explicitly takes a start bus and end bus so that we can stop abusing
the PCI_DEVID macro.
This helper function will be called a second time in an subsequent patch.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
L1 tables are allocated with __get_dma_pages, and therefore already
ignored by kmemleak.
Without this, the kernel would print this error message on boot,
when the first L1 table is allocated:
[ 2.810533] kmemleak: Trying to color unknown object at 0xffffffd652388000 as Black
[ 2.818190] CPU: 5 PID: 39 Comm: kworker/5:0 Tainted: G S 4.19.16 #8
[ 2.831227] Workqueue: events deferred_probe_work_func
[ 2.836353] Call trace:
...
[ 2.852532] paint_ptr+0xa0/0xa8
[ 2.855750] kmemleak_ignore+0x38/0x6c
[ 2.859490] __arm_v7s_alloc_table+0x168/0x1f4
[ 2.863922] arm_v7s_alloc_pgtable+0x114/0x17c
[ 2.868354] alloc_io_pgtable_ops+0x3c/0x78
...
Fixes: e5fc9753b1 ("iommu/io-pgtable: Add ARMv7 short descriptor support")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The "Domain 0 is reserved, so dont process it" comment suggests that a NULL
pointer corresponds to domain 0. I don't think that's true, and in any
case, every caller supplies a non-NULL domain pointer that has already been
dereferenced, so the test is unnecessary.
Remove the test for a null "domain" pointer. No functional change
intended.
This null pointer check was added by 5e98c4b1d6 ("Allocation and free
functions of virtual machine domain").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
domain_remove_dev_info() takes a struct dmar_domain * argument, but doesn't
use it. Remove it. No functional change intended.
The last use of this argument was removed by 127c761598 ("iommu/vt-d:
Pass device_domain_info to __dmar_remove_one_dev_info").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A local variable initialization is a hint that the variable will be used in
an unusual way. If the initialization is unnecessary, that hint becomes a
distraction.
Remove unnecessary initializations. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use dev_printk() when possible so the IOMMU messages are more consistent
with other messages related to the device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use dev_printk() when possible so the IOMMU messages are more consistent
with other messages related to the device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use dev_printk() when possible so the IOMMU messages are more consistent
with other messages related to the device.
E.g., I think these messages related to surprise hotplug:
pciehp 0000:80:10.0:pcie004: Slot(36): Link Down
iommu: Removing device 0000:87:00.0 from group 12
pciehp 0000:80:10.0:pcie004: Slot(36): Card present
pcieport 0000:80:10.0: Data Link Layer Link Active not set in 1000 msec
would be easier to read as these (also requires some PCI changes not
included here):
pci 0000:80:10.0: Slot(36): Link Down
pci 0000:87:00.0: Removing from iommu group 12
pci 0000:80:10.0: Slot(36): Card present
pci 0000:80:10.0: Data Link Layer Link Active not set in 1000 msec
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move io-pgtable.h to include/linux/ and export alloc_io_pgtable_ops
and free_io_pgtable_ops. This enables drivers outside drivers/iommu/ to
use the page table library. Specifically, some ARM Mali GPUs use the
ARM page table formats.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The device links used by rockchip-iommu and exynos-iommu are
completely managed by these drivers within the IOMMU framework,
so there is no reason to involve the driver core in the management
of these links.
For this reason, make rockchip-iommu and exynos-iommu pass
DL_FLAG_STATELESS in flags to device_link_add(), so that the device
links used by them are stateless.
[Note that this change is requisite for a subsequent one that will
rework the management of stateful device links in the driver core
and it will not be compatible with the two drivers in question any
more.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few more fixes this time:
- Two patches to fix the error path of the map_sg implementation
of the AMD IOMMU driver.
- Also a missing IOTLB flush is fixed in the AMD IOMMU driver.
- Memory leak fix for the Intel IOMMU driver.
- Fix a regression in the Mediatek IOMMU driver which caused
device initialization to fail (seen as broken HDMI output).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=kSY5
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"A few more fixes this time:
- Two patches to fix the error path of the map_sg implementation of
the AMD IOMMU driver.
- Also a missing IOTLB flush is fixed in the AMD IOMMU driver.
- Memory leak fix for the Intel IOMMU driver.
- Fix a regression in the Mediatek IOMMU driver which caused device
initialization to fail (seen as broken HDMI output)"
* tag 'iommu-fixes-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix IOMMU page flush when detach device from a domain
iommu/mediatek: Use correct fwspec in mtk_iommu_add_device()
iommu/vt-d: Fix memory leak in intel_iommu_put_resv_regions()
iommu/amd: Unmap all mapped pages in error path of map_sg
iommu/amd: Call free_iova_fast with pfn in map_sg
The change_pte() interface is tailored for PFN updates, while the
other notifier invalidate_range() should be enough for Intel IOMMU
cache flushing. Actually we've done similar thing for AMD IOMMU
already in 8301da53fb ("iommu/amd: Remove change_pte mmu_notifier
call-back", 2014-07-30) but the Intel IOMMU driver still have it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD IOMMU driver is using the clear_flush_young() to do cache flushing
but that's actually already covered by invalidate_range(). Remove the
extra notifier and the chunks.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since there are multiple possible failures in iommu_map_page
it would be useful to know which case is being hit when the
error message is printed in map_sg. While here, fix up checkpatch
complaint about using function name in a string instead of
__func__.
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 765b6a98c1 ("iommu/vt-d: Enumerate the scalable
mode capability") enables VT-d scalable mode if hardware
advertises the capability. As we will bring up different
features and use cases to upstream in different patch
series, it will leave some intermediate kernel versions
which support partial features. Hence, end user might run
into problems when they use such kernels on bare metals
or virtualization environments.
This leaves scalable mode default off and end users could
turn it on with "intel-iommu=sm_on" only when they have
clear ideas about which scalable features are supported
in the kernel.
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently the Intel IOMMU uses the default dma_[un]map_resource()
implementations does nothing and simply returns the physical address
unmodified.
However, this doesn't create the IOVA entries necessary for addresses
mapped this way to work when the IOMMU is enabled. Thus, when the
IOMMU is enabled, drivers relying on dma_map_resource() will trigger
DMAR errors. We see this when running ntb_transport with the IOMMU
enabled, DMA, and switchtec hardware.
The implementation for intel_map_resource() is nearly identical to
intel_map_page(), we just have to re-create __intel_map_single().
dma_unmap_resource() uses intel_unmap_page() directly as the
functions are identical.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When a VM is terminated, the VFIO driver detaches all pass-through
devices from VFIO domain by clearing domain id and page table root
pointer from each device table entry (DTE), and then invalidates
the DTE. Then, the VFIO driver unmap pages and invalidate IOMMU pages.
Currently, the IOMMU driver keeps track of which IOMMU and how many
devices are attached to the domain. When invalidate IOMMU pages,
the driver checks if the IOMMU is still attached to the domain before
issuing the invalidate page command.
However, since VFIO has already detached all devices from the domain,
the subsequent INVALIDATE_IOMMU_PAGES commands are being skipped as
there is no IOMMU attached to the domain. This results in data
corruption and could cause the PCI device to end up in indeterministic
state.
Fix this by invalidate IOMMU pages when detach a device, and
before decrementing the per-domain device reference counts.
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: Joerg Roedel <joro@8bytes.org>
Co-developed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Fixes: 6de8ad9b9e ('x86/amd-iommu: Make iommu_flush_pages aware of multiple IOMMUs')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
end_pfn is never used after commit <aa3ac9469c18> ('iommu/iova: Make dma
32bit pfn implicit'), cleanup it.
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The mtk_iommu_add_device() function keeps the fwspec in an
on-stack pointer and calls mtk_iommu_create_mapping(), which
might change its source, dev->iommu_fwspec. This causes the
on-stack pointer to be obsoleted and the device
initialization to fail. Update the on-stack fwspec pointer
after mtk_iommu_create_mapping() has been called.
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Fixes: a9bf2eec5a ('iommu/mediatek: Use helper functions to access dev->iommu_fwspec')
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 9d3a4de4cb ("iommu: Disambiguate MSI region types") changed
the reserved region type in intel_iommu_get_resv_regions() from
IOMMU_RESV_RESERVED to IOMMU_RESV_MSI, but it forgot to also change
the type in intel_iommu_put_resv_regions().
This leads to a memory leak, because now the check in
intel_iommu_put_resv_regions() for IOMMU_RESV_RESERVED will never
be true, and no allocated regions will be freed.
Fix this by changing the region type in intel_iommu_put_resv_regions()
to IOMMU_RESV_MSI, matching the type of the allocated regions.
Fixes: 9d3a4de4cb ("iommu: Disambiguate MSI region types")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the error path of map_sg there is an incorrect if condition
for breaking out of the loop that searches the scatterlist
for mapped pages to unmap. Instead of breaking out of the
loop once all the pages that were mapped have been unmapped,
it will break out of the loop after it has unmapped 1 page.
Fix the condition, so it breaks out of the loop only after
all the mapped pages have been unmapped.
Fixes: 80187fd39d ("iommu/amd: Optimize map_sg and unmap_sg")
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the error path of map_sg, free_iova_fast is being called with
address instead of the pfn. This results in a bad value getting into
the rcache, and can result in hitting a BUG_ON when
iova_magazine_free_pfns is called.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: 80187fd39d ("iommu/amd: Optimize map_sg and unmap_sg")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
One fix only for now:
- Fix probe deferral in iommu/of code (broke with recent changes
to iommu_ops->add_device invocation)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+93K
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"One fix only for now: Fix probe deferral in iommu/of code (broke with
recent changes to iommu_ops->add_device invocation)"
* tag 'iommu-fixes-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/of: Fix probe-deferral
Removed redundant safety-checks in the code and some debug code that
isn't actually very useful for debugging, like enormous pagetable dump
on each fault. The majority of the changes are code reshuffling,
variables/whitespaces clean up and removal of debug messages that
duplicate messages of the IOMMU-core. Now the GART translation is kept
disabled while GART is suspended.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
GART is a simple IOMMU provider that has single address space. There is
no need to setup global clients list and manage it for tracking of the
active domain, hence lot's of code could be safely removed and replaced
with a simpler alternative.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There could be unlimited number of allocated domains, but only one domain
can be active at a time. Hence devices must be detached only from the
active domain.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
GART became a part of Memory Controller, hence now the drivers device
is Memory Controller and not GART. As a result all printed messages are
prepended with the "tegra-mc 7000f000.memory-controller:", so let's
prepend GART's messages with "gart:" in order to differentiate them
from the MC.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
GART is a part of the Memory Controller driver that is always built-in,
hence there is no benefit from the use of managed resources.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
GART has a single address space that is shared by all devices, hence only
one domain could be active at a time.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix NULL pointer dereference on IOMMU domain destruction that happens
because clients list is being iterated unsafely and its elements are
getting deleted during the iteration.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix spinlock recursion bug that happens on IOMMU domain destruction if
any of the allocated domains have devices attached to them.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tegra20 doesn't have SMMU. Move out checking of the SMMU presence from
the SMMU driver into the Memory Controller driver. This change makes code
consistent in regards to how GART/SMMU presence checking is performed.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The device-tree binding has been changed. There is no separate GART device
anymore, it is squashed into the Memory Controller. Integrate GART module
with the MC in a way it is done for the SMMU on Tegra30+.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently GART writes one page entry at a time. More optimal would be to
aggregate the writes and flush BUS buffer in the end, this gives map/unmap
10-40% performance boost (depending on size of mapping) in comparison to
flushing after each page entry update.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce iotlb_sync_map() callback that is invoked in the end of
iommu_map(). This new callback allows IOMMU drivers to avoid syncing
after mapping of each contiguous chunk and sync only when the whole
mapping is completed, optimizing performance of the mapping operation.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
GART can't handle all devices, hence ignore devices that aren't related
to GART. IOMMU phandle must be explicitly assign to devices in the device
tree.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove unneeded headers inclusion and sort the headers in alphabet order.
Remove pr_fmt macro since there is no pr_*() in the code and it doesn't
affect dev_*() functions.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VT-d Rev3.0 has made a few changes to the page request interface,
1. widened PRQ descriptor from 128 bits to 256 bits;
2. removed streaming response type;
3. introduced private data that requires page response even the
request is not last request in group (LPIG).
This is a supplement to commit 1c4f88b7f1 ("iommu/vt-d: Shared
virtual address in scalable mode") and makes the svm code compliant
with VT-d Rev3.0.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Fixes: 1c4f88b7f1 ("iommu/vt-d: Shared virtual address in scalable mode")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Whilst iommu_probe_device() does check for non-NULL ops as the previous
code did, it does not do so in the same order relative to the other
checks, and as a result means that -EPROBE_DEFER returned by of_xlate()
(plus any real error condition too) gets overwritten with -EINVAL and
leads to various misbehaviour.
Reinstate the original logic, but without implicitly relying on ops
being set to infer !err as the initial condition (now that the validity
of ops for its own sake is checked elsewhere).
Fixes: 641fb0efbf ("iommu/of: Don't call iommu_ops->add_device directly")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Drivers such as the Intel IPU3 ImgU driver use the IOVA library to manage
the device's own virtual address space while not implementing the IOMMU
API. Currently the IOVA library is only compiled if the IOMMU support is
enabled, resulting into a failure during linking due to missing symbols.
Fix this by defining IOVA library Kconfig bits independently of IOMMU
support configuration, and descending to the iommu directory
unconditionally during the build.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Delete tab aligning a statement with the right hand side of a
preceding assignment rather than the left hand side.
Found with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Including (in no particular order):
- Page table code for AMD IOMMU now supports large pages where
smaller page-sizes were mapped before. VFIO had to work around
that in the past and I included a patch to remove it (acked by
Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would
never work as modules anyway.
- Work to unify the the iommu-related pointers in
'struct device' into one pointer. This work is not finished
yet, but will probably be in the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=DT9A
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- Page table code for AMD IOMMU now supports large pages where smaller
page-sizes were mapped before. VFIO had to work around that in the
past and I included a patch to remove it (acked by Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would never
work as modules anyway.
- Work to unify the the iommu-related pointers in 'struct device' into
one pointer. This work is not finished yet, but will probably be in
the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
iommu: Check for iommu_ops == NULL in iommu_probe_device()
ACPI/IORT: Don't call iommu_ops->add_device directly
iommu/of: Don't call iommu_ops->add_device directly
iommu: Consolitate ->add/remove_device() calls
iommu/sysfs: Rename iommu_release_device()
dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
xhci: Use device_iommu_mapped()
powerpc/iommu: Use device_iommu_mapped()
ACPI/IORT: Use device_iommu_mapped()
iommu/of: Use device_iommu_mapped()
driver core: Introduce device_iommu_mapped() function
iommu/tegra: Use helper functions to access dev->iommu_fwspec
iommu/qcom: Use helper functions to access dev->iommu_fwspec
iommu/of: Use helper functions to access dev->iommu_fwspec
iommu/mediatek: Use helper functions to access dev->iommu_fwspec
iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
iommu/dma: Use helper functions to access dev->iommu_fwspec
iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
ACPI/IORT: Use helper functions to access dev->iommu_fwspec
iommu: Introduce wrappers around dev->iommu_fwspec
...
Here is the big set of char and misc driver patches for 4.21-rc1.
Lots of different types of driver things in here, as this tree seems to
be the "collection of various driver subsystems not big enough to have
their own git tree" lately.
Anyway, some highlights of the changes in here:
- binderfs: is it a rule that all driver subsystems will eventually
grow to have their own filesystem? Binder now has one to handle the
use of it in containerized systems. This was discussed at the
Plumbers conference a few months ago and knocked into mergable shape
very fast by Christian Brauner. Who also has signed up to be
another binder maintainer, showing a distinct lack of good judgement :)
- binder updates and fixes
- mei driver updates
- fpga driver updates and additions
- thunderbolt driver updates
- soundwire driver updates
- extcon driver updates
- nvmem driver updates
- hyper-v driver updates
- coresight driver updates
- pvpanic driver additions and reworking for more device support
- lp driver updates. Yes really, it's _finally_ moved to the proper
parallal port driver model, something I never thought I would see
happen. Good stuff.
- other tiny driver updates and fixes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCZCUA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymF9QCgx/Z8Fj1qzGVGrIE4flXOi7pxOrgAoMqJEWtU
ywwL8M9suKDz7cZT9fWQ
=xxr6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc driver patches for 4.21-rc1.
Lots of different types of driver things in here, as this tree seems
to be the "collection of various driver subsystems not big enough to
have their own git tree" lately.
Anyway, some highlights of the changes in here:
- binderfs: is it a rule that all driver subsystems will eventually
grow to have their own filesystem? Binder now has one to handle the
use of it in containerized systems.
This was discussed at the Plumbers conference a few months ago and
knocked into mergable shape very fast by Christian Brauner. Who
also has signed up to be another binder maintainer, showing a
distinct lack of good judgement :)
- binder updates and fixes
- mei driver updates
- fpga driver updates and additions
- thunderbolt driver updates
- soundwire driver updates
- extcon driver updates
- nvmem driver updates
- hyper-v driver updates
- coresight driver updates
- pvpanic driver additions and reworking for more device support
- lp driver updates. Yes really, it's _finally_ moved to the proper
parallal port driver model, something I never thought I would see
happen. Good stuff.
- other tiny driver updates and fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits)
MAINTAINERS: add another Android binder maintainer
intel_th: msu: Fix an off-by-one in attribute store
stm class: Add a reference to the SyS-T document
stm class: Fix a module refcount leak in policy creation error path
char: lp: use new parport device model
char: lp: properly count the lp devices
char: lp: use first unused lp number while registering
char: lp: detach the device when parallel port is removed
char: lp: introduce list to save port number
bus: qcom: remove duplicated include from qcom-ebi2.c
VMCI: Use memdup_user() rather than duplicating its implementation
char/rtc: Use of_node_name_eq for node name comparisons
misc: mic: fix a DMA pool free failure
ptp: fix an IS_ERR() vs NULL check
genwqe: Fix size check
binder: implement binderfs
binder: fix use-after-free due to ksys_close() during fdget()
bus: fsl-mc: remove duplicated include files
bus: fsl-mc: explicitly define the fsl_mc_command endianness
misc: ti-st: make array read_ver_cmd static, shrinks object size
...
This check needs to be there and got lost at some point
during development. Add it again.
Fixes: 641fb0efbf ('iommu/of: Don't call iommu_ops->add_device directly')
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove the iommu_ prefix from the function and a few other
static data structures so that the iommu_release_device name
can be re-used in iommu core code.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use Use device_iommu_mapped() to check if the device is
already mapped by an IOMMU.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These wrappers will be used to easily change the location of
the field later when all users are converted.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit 82db33dc5e.
After the commit 29859aeb8a ("iommu/io-pgtable-arm-v7s: Abort
allocation when table address overflows the PTE"), v7s will return fail
if the page table allocation isn't expected. this PHYS_OFFSET check
is unnecessary now.
And this check may lead to fail. For example, If CONFIG_RANDOMIZE_BASE
is enabled, the "memstart_addr" will be updated randomly, then the
PHYS_OFFSET may be random.
Reported-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Avoid expensive indirect calls in the fast path DMA mapping
operations by directly calling the dma_direct_* ops if we are using
the directly mapped DMA operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Deferred invalidation is an ECS specific feature. It will not be
supported when IOMMU works in scalable mode. As we deprecated the
ECS support, remove deferred invalidation and cleanup the code.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch enables the current SVA (Shared Virtual Address)
implementation to work in the scalable mode.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds an interface to setup the PASID entries for first
level page table translation.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch enables the translation for requests without PASID in
the scalable mode by setting up the root and context entries.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
So that the pasid related info, such as the pasid table and the
maximum of pasid could be used during setting up scalable mode
context.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
when the scalable mode is enabled, there is no second level
page translation pointer in the context entry any more (for
DMA request without PASID). Instead, a new RID2PASID field
is introduced in the context entry. Software can choose any
PASID value to set RID2PASID and then setup the translation
in the corresponding PASID entry. Upon receiving a DMA request
without PASID, hardware will firstly look at this RID2PASID
field and then treat this request as a request with a pasid
value specified in RID2PASID field.
Though software is allowed to use any PASID for the RID2PASID,
we will always use the PASID 0 as a sort of design decision.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds the interfaces to setup or tear down the structures
for second level page table translations. This includes types
of second level only translation and pass through.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Vt-d spec rev3.0 (section 6.2.3.1) requires that each pasid
entry for first-level or pass-through translation should be
programmed with a domain id different from those used for
second-level or nested translation. It is recommended that
software could use a same domain id for all first-only and
pass-through translations.
This reserves a domain id for first-level and pass-through
translations.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Intel vt-d spec rev3.0 requires software to use 256-bit
descriptors in invalidation queue. As the spec reads in
section 6.5.2:
Remapping hardware supporting Scalable Mode Translations
(ECAP_REG.SMTS=1) allow software to additionally program
the width of the descriptors (128-bits or 256-bits) that
will be written into the Queue. Software should setup the
Invalidation Queue for 256-bit descriptors before progra-
mming remapping hardware for scalable-mode translation as
128-bit descriptors are treated as invalid descriptors
(see Table 21 in Section 6.5.2.10) in scalable-mode.
This patch adds 256-bit invalidation descriptor support
if the hardware presents scalable mode capability.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
So that they could also be used in other source files.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In scalable mode, pasid structure is a two level table with
a pasid directory table and a pasid table. Any pasid entry
can be identified by a pasid value in below way.
1
9 6 5 0
.-----------------------.-------.
| PASID | |
'-----------------------'-------' .-------------.
| | | |
| | | |
| | | |
| .-----------. | .-------------.
| | | |----->| PASID Entry |
| | | | '-------------'
| | | |Plus | |
| .-----------. | | |
|---->| DIR Entry |-------->| |
| '-----------' '-------------'
.---------. |Plus | |
| Context | | | |
| Entry |------->| |
'---------' '-----------'
This changes the pasid table APIs to support scalable mode
PASID directory and PASID table. It also adds a helper to
get the PASID table entry according to the pasid value.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel vt-d spec rev3.0 introduces a new translation
mode called scalable mode, which enables PASID-granular
translations for first level, second level, nested and
pass-through modes. At the same time, the previous
Extended Context (ECS) mode is deprecated (no production
ever implements ECS).
This patch adds enumeration for Scalable Mode and removes
the deprecated ECS enumeration. It provides a boot time
option to disable scalable mode even hardware claims to
support it.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Change function __iommu_dma_alloc_pages() to allocate pages for DMA from
respective device NUMA node. The ternary operator which would be for
alloc_pages_node() is tidied along with this.
The motivation for this change is to have a policy for page allocation
consistent with direct DMA mapping, which attempts to allocate pages local
to the device, as mentioned in [1].
In addition, for certain workloads it has been observed a marginal
performance improvement. The patch caused an observation of 0.9% average
throughput improvement for running tcrypt with HiSilicon crypto engine.
We also include a modification to use kvzalloc() for kzalloc()/vzalloc()
combination.
[1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1692998.html
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
[JPG: Added kvzalloc(), drop pages ** being device local, remove ternary operator, update message]
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
qcom,smmu-v2 is an arm,smmu-v2 implementation with specific
clock and power requirements.
On msm8996, multiple cores, viz. mdss, video, etc. use this
smmu. On sdm845, this smmu is used with gpu.
Add bindings for the same.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Finally add the device link between the master device and
smmu, so that the smmu gets runtime enabled/disabled only when the
master needs it. This is done from add_device callback which gets
called once when the master is added to the smmu.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Enable pm-runtime on devices that implement a pm domain. Then,
add pm runtime hooks to several iommu_ops to power cycle the
smmu device for explicit TLB invalidation requests, and
register space accesses, etc.
We need these hooks when the smmu, linked to its master through
device links, has to be powered-up without the master device
being in context.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
[vivek: Cleanup pm runtime calls]
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The smmu needs to be functional only when the respective
master's using it are active. The device_link feature
helps to track such functional dependencies, so that the
iommu gets powered when the master device enables itself
using pm_runtime. So by adapting the smmu driver for
runtime pm, above said dependency can be addressed.
This patch adds the pm runtime/sleep callbacks to the
driver and the corresponding bulk clock handling for all
the clocks needed by smmu.
Also, while we enable the runtime pm, add a pm sleep suspend
callback that pushes devices to low power state by turning
the clocks off in a system sleep.
Add corresponding clock enable path in resume callback as well.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
[Thor: Rework to get clocks from device tree]
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
[vivek: rework for clock and pm ops]
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
After removing an entry from a queue (e.g. reading an event in
arm_smmu_evtq_thread()) it is necessary to advance the MMIO consumer
pointer to free the queue slot back to the SMMU. A memory barrier is
required here so that all reads targetting the queue entry have
completed before the consumer pointer is updated.
The implementation of queue_inc_cons() relies on a writel() to complete
the previous reads, but this is incorrect because writel() is only
guaranteed to complete prior writes. This patch replaces the call to
writel() with an mb(); writel_relaxed() sequence, which gives us the
read->write ordering which we require.
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The GITS_TRANSLATER MMIO doorbell register in the ITS hardware is
architected to be 4 bytes in size, yet on hi1620 and earlier, Hisilicon
have allocated the adjacent 4 bytes to carry some IMPDEF sideband
information which results in an 8-byte MSI payload being delivered when
signalling an interrupt:
MSIAddr:
|----4bytes----|----4bytes----|
| MSIData | IMPDEF |
This poses no problem for the ITS hardware because the adjacent 4 bytes
are reserved in the memory map. However, when delivering MSIs to memory,
as we do in the SMMUv3 driver for signalling the completion of a SYNC
command, the extended payload will corrupt the 4 bytes adjacent to the
"sync_count" member in struct arm_smmu_device. Fortunately, the current
layout allocates these bytes to padding, but this is fragile and we
should make this explicit.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[will: Rewrote commit message and comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
When we insert the sync sequence number into the CMD_SYNC.MSIData field,
we do so in CPU-native byte order, before writing out the whole command
as explicitly little-endian dwords. Thus on big-endian systems, the SMMU
will receive and write back a byteswapped version of sync_nr, which would
be perfect if it were targeting a similarly-little-endian ITS, but since
it's actually writing back to memory being polled by the CPUs, they're
going to end up seeing the wrong thing.
Since the SMMU doesn't care what the MSIData actually contains, the
minimal-overhead solution is to simply add an extra byteswap initially,
such that it then writes back the big-endian format directly.
Cc: <stable@vger.kernel.org>
Fixes: 37de98f8f1 ("iommu/arm-smmu-v3: Use CMD_SYNC completion MSI")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The parameter is still there but it's ignored. We need to check its
value before deciding to go into passthrough mode for AMD IOMMU v2
capable device.
We occasionally use this parameter to force v2 capable device into
translation mode to debug memory corruption that we suspect is
caused by DMA writes.
To address the following comment from Joerg Roedel on the first
version, v2 capability of device is completely ignored.
> This breaks the iommu_v2 use-case, as it needs a direct mapping for the
> devices that support it.
And from Documentation/admin-guide/kernel-parameters.txt:
This option does not override iommu=pt
Fixes: aafd8ba0ca ("iommu/amd: Implement add_device and remove_device")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Pass the page + offset to the low-level __iommu_map_single helper
(which gets renamed to fit the new calling conventions) as both
callers have the page at hand.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Note that the existing code used AMD_IOMMU_MAPPING_ERROR to check from
a 0 return from the IOVA allocator, which is replaced with an explicit
0 as in the implementation and other users of that interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently Linux automatically enables ATS (Address Translation Service)
for any device that supports it (and IOMMU is turned on). ATS is used to
accelerate DMA access as the device can cache translations locally so
there is no need to do full translation on IOMMU side. However, as
pointed out in [1] ATS can be used to bypass IOMMU based security
completely by simply sending PCIe read/write transaction with AT
(Address Translation) field set to "translated".
To mitigate this modify the Intel IOMMU code so that it does not enable
ATS for any device that is marked as being untrusted. In case this turns
out to cause performance issues we may selectively allow ATS based on
user decision but currently use big hammer and disable it completely to
be on the safe side.
[1] https://www.repository.cam.ac.uk/handle/1810/274352
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR
ACPI table [1] for BIOS to report compliance about platform initiated
DMA restricted to RMRR ranges when transferring control to the OS. This
means that during OS boot, before it enables IOMMU none of the connected
devices can bypass DMA protection for instance by overwriting the data
structures used by the IOMMU. The OS also treats this as a hint that the
IOMMU should be enabled to prevent DMA attacks from possible malicious
devices.
A use of this flag is Kernel DMA protection for Thunderbolt [2] which in
practice means that IOMMU should be enabled for PCIe devices connected
to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA
operations are limited in the range reserved for it, thus the DMA
attacks are prevented. All these devices are enumerated in the PCI/PCIe
module and marked with an untrusted flag.
This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set
in DMAR ACPI table and there are PCIe devices marked as untrusted in the
system. This can be turned off by adding "intel_iommu=off" in the kernel
command line, if any problems are found.
[1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf
[2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config ARM_SMMU_V3
drivers/iommu/Kconfig: bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, but unlike most drivers, we can't delete the
function tied to the ".remove" field. This is because as of commit
7aa8619a66 ("iommu/arm-smmu-v3: Implement shutdown method") the
.remove function was given a one line wrapper and re-used to provide a
.shutdown service. So we delete the wrapper and re-name the function
from remove to shutdown.
We add a moduleparam.h include since the file does actually declare
some module parameters, and leaving them as such is the easiest way
currently to remain backwards compatible with existing use cases.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Nate Watterson <nwatters@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config ARM_SMMU
drivers/iommu/Kconfig: bool "ARM Ltd. System MMU (SMMU) Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, but unlike most drivers, we can't delete the
function tied to the ".remove" field. This is because as of commit
7aa8619a66 ("iommu/arm-smmu-v3: Implement shutdown method") the
.remove function was given a one line wrapper and re-used to provide a
.shutdown service. So we delete the wrapper and re-name the function
from remove to shutdown.
We add a moduleparam.h include since the file does actually declare
some module parameters, and leaving them as such is the easiest way
currently to remain backwards compatible with existing use cases.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Nate Watterson <nwatters@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config TEGRA_IOMMU_GART
drivers/iommu/Kconfig: bool "Tegra GART IOMMU Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.
Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.
We replace module.h with moduleparam.h since the file does actually
declare some module_param() and the easiest way to keep back
compatibility with existing use cases is to leave it as-is for now.
The init function was missing an __init annotation, so it was added.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-tegra@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config MTK_IOMMU_V1
drivers/iommu/Kconfig: bool "MTK IOMMU Version 1 (M4U gen1) Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init just becomes device_initcall for non-modules, the
init ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config IPMMU_VMSA
drivers/iommu/Kconfig: bool "Renesas VMSA-compatible IPMMU"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not even used by this driver, the init ordering
remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config MTK_IOMMU_V1
drivers/iommu/Kconfig: bool "MTK IOMMU Version 1 (M4U gen1) Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not even used by this driver, the init ordering
remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Honghui Zhang <honghui.zhang@mediatek.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mediatek@lists.infradead.org
Acked-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config MSM_IOMMU
drivers/iommu/Kconfig: bool "MSM IOMMU Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not even used by this driver, the init ordering
remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config ROCKCHIP_IOMMU
drivers/iommu/Kconfig: bool "Rockchip IOMMU Support"
...meaning that it currently is not being built as a module by anyone.
The bind/unbind/remove was already explicitly disabled in commit
98b72b94de ("iommu/rockchip: Prohibit unbind and remove").
Lets remove the remaining traces of modular infrastructure, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simon Xue <xxm@rock-chips.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace as needed.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To avoid adding copy and pasted strcmp codes in the future,
this patch adds an array "rcar_gen3_slave_whitelist" to check
whether the device can work with the IPMMU or not.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some R-Car Gen3 SoCs has hardware restrictions on the IPMMU. So,
to check whether this R-Car Gen3 SoC can use the IPMMU correctly,
this patch modifies the ipmmu_slave_whitelist().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the switch to dev_err for reporting errors from the
iommu log there was an unwanted newline introduced. The
reason was that the reporting was done in multiple dev_err()
calls, and dev_err adds a newline after every call.
Fix it by printing the log messages with only one dev_err()
call.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Because we already have the DEFINE_SHOW_ATTRIBUTE,there is no need
to define such a macro.So remove DEBUG_SEQ_FOPS_RO.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU driver opportunistically skips a few top level page
tables from the domain paging directory while programming the IOMMU
context entry. However there is an implicit assumption in the code that
domain's adjusted guest address width (agaw) would always be greater
than IOMMU's agaw.
The IOMMU capabilities in an upcoming platform cause the domain's agaw
to be lower than IOMMU's agaw. The issue is seen when the IOMMU supports
both 4-level and 5-level paging. The domain builds a 4-level page table
based on agaw of 2. However the IOMMU's agaw is set as 3 (5-level). In
this case the code incorrectly tries to skip page page table levels.
This causes the IOMMU driver to avoid programming the context entry. The
fix handles this case and programs the context entry accordingly.
Fixes: de24e55395 ("iommu/vt-d: Simplify domain_context_mapping_one")
Cc: <stable@vger.kernel.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reported-by: Ramos Falcon, Ernesto R <ernesto.r.ramos.falcon@intel.com>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
memunmap() should be used to free the return of memremap(), not
iounmap().
Fixes: dfddb969ed ('iommu/vt-d: Switch from ioremap_cache to memremap')
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Before this patch the iommu_map_page() function failed when
it tried to map a huge-page where smaller mappings existed
before.
With this change the page-table pages of the old mappings
are teared down, so that the huge-page can be mapped.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This makes sure that __pte always contains the correct value
when the pointer to the next page-table level is derived.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Before this patch it was not possible the downgrade a
mapping established with page-mode 7 to a mapping using
smaller page-sizes, because the pte_level != level check
prevented that.
Treat page-mode 7 like a non-present mapping and allow to
overwrite it in alloc_pte().
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function is a more generic version of free_pagetable()
and will be used to free only specific sub-trees of a
page-table.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Collect all pages that belong to a page-table in a list and
free them after the tree has been traversed. This allows to
implement safer page-table updates in subsequent patches.
Also move the functions for page-table freeing a bit upwards
in the file so that they are usable from the iommu_map() path.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This register should have been programmed with the physical address
of the memory location containing the shadow tail pointer for
the guest virtual APIC log instead of the base address.
Fixes: 8bda0cfbdc ('iommu/amd: Detect and initialize guest vAPIC log')
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If iommu_ops.add_device() fails, iommu_ops.domain_free() is still
called, leading to a crash, as the domain was only partially
initialized:
ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables
sata_rcar ee300000.sata: Unable to initialize IPMMU context
iommu: Failed to add device ee300000.sata to group 0: -22
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
...
Call trace:
ipmmu_domain_free+0x1c/0xa0
iommu_group_release+0x48/0x68
kobject_put+0x74/0xe8
kobject_del.part.0+0x3c/0x50
kobject_put+0x60/0xe8
iommu_group_get_for_dev+0xa8/0x1f0
ipmmu_add_device+0x1c/0x40
of_iommu_configure+0x118/0x190
Fix this by checking if the domain's context already exists, before
trying to destroy it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: d25a2a16f0 ('iommu: Add driver for Renesas VMSA-compatible IPMMU')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When handling page request without pasid event, go to "no_pasid"
branch instead of "bad_req". Otherwise, a NULL pointer deference
will happen there.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: a222a7f0bb 'iommu/vt-d: Implement page request handling'
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_ops are not supposed to change at runtime.
Functions 'iommu_device_set_ops' and 'bus_set_iommu' working with
const iommu_ops provided by <linux/iommu.h>. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
(Change the title to iommu/mediatek: xx)
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The original motivation for iommu_map_sg() was to give IOMMU drivers the
chance to map an IOVA-contiguous scatterlist as efficiently as they
could. It turns out that there isn't really much driver-specific
business involved there, so now that the default implementation is
mandatory let's just improve that - the main thing we're after is to use
larger pages wherever possible, and as long as domain->pgsize_bitmap
reflects reality, iommu_map() can already do that in a generic way. All
we need to do is detect physically-contiguous segments and batch them
into a single map operation, since whatever we do here is transparent to
our caller and not bound by any segment-length restrictions on the list
itself.
Speaking of efficiency, there's really very little point in duplicating
the checks that iommu_map() is going to do anyway, so those get cleared
up in the process.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
hugetlbfs: dirty pages as they are added to pagecache
mm: export add_swap_extent()
mm: split SWP_FILE into SWP_ACTIVATED and SWP_FS
tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE
mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page()
mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page()
mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition
mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t
mm/gup: cache dev_pagemap while pinning pages
Revert "x86/e820: put !E820_TYPE_RAM regions into memblock.reserved"
mm: return zero_resv_unavail optimization
mm: zero remaining unavailable struct pages
tools/testing/selftests/vm/gup_benchmark.c: add MAP_HUGETLB option
tools/testing/selftests/vm/gup_benchmark.c: add MAP_SHARED option
tools/testing/selftests/vm/gup_benchmark.c: allow user specified file
tools/testing/selftests/vm/gup_benchmark.c: fix 'write' flag usage
mm/gup_benchmark.c: add additional pinning methods
mm/gup_benchmark.c: time put_page()
mm: don't raise MEMCG_OOM event due to failed high-order allocation
mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock
...
Revert 5ff7091f5a ("mm, mmu_notifier: annotate mmu notifiers with
blockable invalidate callbacks").
MMU_INVALIDATE_DOES_NOT_BLOCK flags was the only one used and it is no
longer needed since 93065ac753 ("mm, oom: distinguish blockable mode for
mmu notifiers"). We now have a full support for per range !blocking
behavior so we can drop the stop gap workaround which the per notifier
flag was used for.
Link: http://lkml.kernel.org/r/20180827112623.8992-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral bindings
out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers
-----BEGIN PGP SIGNATURE-----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=335v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
These updates bring:
- Debugfs support for the Intel VT-d driver. When enabled, it
now also exposes some of its internal data structures to
user-space for debugging purposes.
- ARM-SMMU driver now uses the generic deferred flushing
and fast-path iova allocation code. This is expected to be a
major performance improvement, as this allocation path scales
a lot better.
- Support for r8a7744 in the Renesas iommu driver
- Couple of minor fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=q1HJ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- Debugfs support for the Intel VT-d driver.
When enabled, it now also exposes some of its internal data
structures to user-space for debugging purposes.
- ARM-SMMU driver now uses the generic deferred flushing and fast-path
iova allocation code.
This is expected to be a major performance improvement, as this
allocation path scales a lot better.
- Support for r8a7744 in the Renesas iommu driver
- Couple of minor fixes and improvements all over the place
* tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
iommu/arm-smmu-v3: Remove unnecessary wrapper function
iommu/arm-smmu-v3: Add SPDX header
iommu/amd: Add default branch in amd_iommu_capable()
dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support
iommu/amd: Move iommu_init_pci() to .init section
iommu/arm-smmu: Support non-strict mode
iommu/io-pgtable-arm-v7s: Add support for non-strict mode
iommu/arm-smmu-v3: Add support for non-strict mode
iommu/io-pgtable-arm: Add support for non-strict mode
iommu: Add "iommu.strict" command line option
iommu/dma: Add support for non-strict mode
iommu/arm-smmu: Ensure that page-table updates are visible before TLBI
iommu/arm-smmu-v3: Implement flush_iotlb_all hook
iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations
iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout
iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
iommu/arm-smmu-v3: Fix a couple of minor comment typos
iommu: Fix a typo
iommu: Remove .domain_{get,set}_windows
iommu: Tidy up window attributes
...
ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance is
much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular hardware
bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJb0FINAAoJEED/6hsPKofoI60IAJRS3vOAQ9Fav8cJsO1oBHcX
3+NexfnBke1bzrjIR3SUcHKGZbdnVPNZc+Q4JjIbPpPmmOMU5jc9BC1dmd5f4Vzh
BMnQ0yCvgFv3A3fy/Icx1Z8NJppxosdmqdQLrQrNo8aD3cjnqY2yQixdXrAfzLzw
XEgKdIFCCz8oVN/C9TT4wwJn6l9OE7BM5bMKGFy5VNXzMu7t64UDOLbbjZxNgi1g
teYvfVGdt5mH0N7b2GPPWRbJmgnz5ygVVpVNQUEFrdKZoCm6r5u9d19N+RRXAwan
ZYFj10W2T8pJOUf3tryev4V33X7MRQitfJBo4tP5hZfi9uRX89np5zP1CFE7AtY=
=yEPW
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance
is much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular
hardware bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups"
* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
Revert "kvm: x86: optimize dr6 restore"
KVM: PPC: Optimize clearing TCEs for sparse tables
x86/kvm/nVMX: tweak shadow fields
selftests/kvm: add missing executables to .gitignore
KVM: arm64: Safety check PSTATE when entering guest and handle IL
KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
arm/arm64: KVM: Enable 32 bits kvm vcpu events support
arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
KVM: arm64: Fix caching of host MDCR_EL2 value
KVM: VMX: enable nested virtualization by default
KVM/x86: Use 32bit xor to clear registers in svm.c
kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
kvm: vmx: Defer setting of DR6 until #DB delivery
kvm: x86: Defer setting of CR2 until #PF delivery
kvm: x86: Add payload operands to kvm_multiple_exception
kvm: x86: Add exception payload fields to kvm_vcpu_events
kvm: x86: Add has_payload and payload to kvm_queued_exception
KVM: Documentation: Fix omission in struct kvm_vcpu_events
KVM: selftests: add Enlightened VMCS test
...
Pull x86 mm updates from Ingo Molnar:
"Lots of changes in this cycle:
- Lots of CPA (change page attribute) optimizations and related
cleanups (Thomas Gleixner, Peter Zijstra)
- Make lazy TLB mode even lazier (Rik van Riel)
- Fault handler cleanups and improvements (Dave Hansen)
- kdump, vmcore: Enable kdumping encrypted memory with AMD SME
enabled (Lianbo Jiang)
- Clean up VM layout documentation (Baoquan He, Ingo Molnar)
- ... plus misc other fixes and enhancements"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
x86/stackprotector: Remove the call to boot_init_stack_canary() from cpu_startup_entry()
x86/mm: Kill stray kernel fault handling comment
x86/mm: Do not warn about PCI BIOS W+X mappings
resource: Clean it up a bit
resource: Fix find_next_iomem_res() iteration issue
resource: Include resource end in walk_*() interfaces
x86/kexec: Correct KEXEC_BACKUP_SRC_END off-by-one error
x86/mm: Remove spurious fault pkey check
x86/mm/vsyscall: Consider vsyscall page part of user address space
x86/mm: Add vsyscall address helper
x86/mm: Fix exception table comments
x86/mm: Add clarifying comments for user addr space
x86/mm: Break out user address space handling
x86/mm: Break out kernel address space handling
x86/mm: Clarify hardware vs. software "error_code"
x86/mm/tlb: Make lazy TLB mode lazier
x86/mm/tlb: Add freed_tables element to flush_tlb_info
x86/mm/tlb: Add freed_tables argument to flush_tlb_mm_range
smp,cpumask: introduce on_each_cpu_cond_mask
smp: use __cpumask_set_cpu in on_each_cpu_cond
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQW3WBGcnu5yJnSXn0kTJLX0iGMLAUCW84v0RQcdG9ueS5sdWNr
QGludGVsLmNvbQAKCRAkTJLX0iGMLGJGAP9fUhp7O4ef6PHxGtvmKHRqkTX6a4b5
/oASkd4qIetgzAEA7hwUopUllbq13IRqc+1Z93wymj4vGjT+jV+2unI0ZAc=
=3Yoq
-----END PGP SIGNATURE-----
Merge tag 'please-pull-next' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 updates from Tony Luck:
"Miscellaneous ia64 fixes from Christoph"
* tag 'please-pull-next' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
intel-iommu: mark intel_dma_ops static
ia64: remove machvec_dma_sync_{single,sg}
ia64/sn2: remove no-ops dma sync methods
ia64: remove the unused iommu_dma_init function
ia64: remove the unused pci_iommu_shutdown function
ia64: remove the unused bad_dma_address symbol
ia64: remove iommu_dma_supported
ia64: remove the dead iommu_sac_force variable
ia64: remove the kern_mem_attribute export
Simplify the code by removing an unnecessary wrapper function.
This was left behind by commit 2f657add07
("iommu/arm-smmu-v3: Specialise CMD_SYNC handling")
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Replace license text with SDPX header
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Recent gcc warns about switching on an enumeration, but not having
an explicit case statement for all members of the enumeration. To
show the compiler this is intentional, we simply add a default case
with nothing more than a break statement.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Boris Ostrovsky reported a memory leak with device passthrough when SME
is active.
The VFIO driver uses iommu_iova_to_phys() to get the physical address for
an iova. This physical address is later passed into vfio_unmap_unpin() to
unpin the memory. The vfio_unmap_unpin() uses pfn_valid() before unpinning
the memory. The pfn_valid() check was failing because encryption mask was
part of the physical address returned. This resulted in the memory not
being unpinned and therefore leaked after the guest terminates.
The memory encryption mask must be cleared from the physical address in
iommu_iova_to_phys().
Fixes: 2543a786aa ("iommu/amd: Allow the AMD IOMMU to work with memory encryption")
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <iommu@lists.linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All we need is to wire up .flush_iotlb_all properly and implement the
domain attribute, and iommu-dma and io-pgtable will do the rest for us.
The only real subtlety is documenting the barrier semantics we're
introducing between io-pgtable and the drivers for non-strict flushes.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As for LPAE, it's simply a case of skipping the leaf invalidation for a
regular unmap, and ensuring that the one in split_blk_unmap() is paired
with an explicit sync ASAP rather than relying on one which might only
eventually happen way down the line.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that io-pgtable knows how to dodge strict TLB maintenance, all
that's left to do is bridge the gap between the IOMMU core requesting
DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE for default domains, and showing the
appropriate IO_PGTABLE_QUIRK_NON_STRICT flag to alloc_io_pgtable_ops().
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[rm: convert to domain attribute, tweak commit message]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Non-strict mode is simply a case of skipping 'regular' leaf TLBIs, since
the sync is already factored out into ops->iotlb_sync at the core API
level. Non-leaf invalidations where we change the page table structure
itself still have to be issued synchronously in order to maintain walk
caches correctly.
To save having to reason about it too much, make sure the invalidation
in arm_lpae_split_blk_unmap() just performs its own unconditional sync
to minimise the window in which we're technically violating the break-
before-make requirement on a live mapping. This might work out redundant
with an outer-level sync for strict unmaps, but we'll never be splitting
blocks on a DMA fastpath anyway.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[rm: tweak comment, commit message, split_blk_unmap logic and barriers]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add a generic command line option to enable lazy unmapping via IOVA
flush queues, which will initally be suuported by iommu-dma. This echoes
the semantics of "intel_iommu=strict" (albeit with the opposite default
value), but in the driver-agnostic fashion of "iommu.passthrough".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[rm: move handling out of SMMUv3 driver, clean up documentation]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: dropped broken printk when parsing command-line option]
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the flush queue infrastructure already abstracted into IOVA
domains, hooking it up in iommu-dma is pretty simple. Since there is a
degree of dependency on the IOMMU driver knowing what to do to play
along, we key the whole thing off a domain attribute which will be set
on default DMA ops domains to request non-strict invalidation. That way,
drivers can indicate the appropriate support by acknowledging the
attribute, and we can easily fall back to strict invalidation otherwise.
The flush queue callback needs a handle on the iommu_domain which owns
our cookie, so we have to add a pointer back to that, but neatly, that's
also sufficient to indicate whether we're using a flush queue or not,
and thus which way to release IOVAs. The only slight subtlety is
switching __iommu_dma_unmap() from calling iommu_unmap() to explicit
iommu_unmap_fast()/iommu_tlb_sync() so that we can elide the sync
entirely in non-strict mode.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[rm: convert to domain attribute, tweak comments and commit message]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The IO-pgtable code relies on the driver TLB invalidation callbacks to
ensure that all page-table updates are visible to the IOMMU page-table
walker.
In the case that the page-table walker is cache-coherent, we cannot rely
on an implicit DSB from the DMA-mapping code, so we must ensure that we
execute a DSB in our tlb_add_flush() callback prior to triggering the
invalidation.
Cc: <stable@vger.kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 2df7a25ce4 ("iommu/arm-smmu: Clean up DMA API usage")
Signed-off-by: Will Deacon <will.deacon@arm.com>
.flush_iotlb_all is currently stubbed to arm_smmu_iotlb_sync() since the
only time it would ever need to actually do anything is for callers
doing their own explicit batching, e.g.:
iommu_unmap_fast(domain, ...);
iommu_unmap_fast(domain, ...);
iommu_iotlb_flush_all(domain, ...);
where since io-pgtable still issues the TLBI commands implicitly in the
unmap instead of implementing .iotlb_range_add, the "flush" only needs
to ensure completion of those already-in-flight invalidations.
However, we're about to start using it in anger with flush queues, so
let's get a proper implementation wired up.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
[rm: document why it wasn't a bug]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Putting adjacent CMD_SYNCs into the command queue is nonsensical, but
can happen when multiple CPUs are inserting commands. Rather than leave
the poor old hardware to chew through these operations, we can instead
drop the subsequent SYNCs and poll for completion of the first. This
has been shown to improve IO performance under pressure, where the
number of SYNC operations reduces by about a third:
CMD_SYNCs reduced: 19542181
CMD_SYNCs total: 58098548 (include reduced)
CMDs total: 116197099 (TLBI:SYNC about 1:1)
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The condition break condition of:
(int)(VAL - sync_idx) >= 0
in the __arm_smmu_sync_poll_msi() polling loop requires that sync_idx
must be increased monotonically according to the sequence of the CMDs in
the cmdq.
However, since the msidata is populated using atomic_inc_return_relaxed()
before taking the command-queue spinlock, then the following scenario
can occur:
CPU0 CPU1
msidata=0
msidata=1
insert cmd1
insert cmd0
smmu execute cmd1
smmu execute cmd0
poll timeout, because msidata=1 is overridden by
cmd0, that means VAL=0, sync_idx=1.
This is not a functional problem, since the caller will eventually either
timeout or exit due to another CMD_SYNC, however it's clearly not what
the code is supposed to be doing. Fix it, by incrementing the sequence
count with the command-queue lock held, allowing us to drop the atomic
operations altogether.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[will: dropped the specialised cmd building routine for now]
Signed-off-by: Will Deacon <will.deacon@arm.com>
In removing the pagetable-wide lock, we gained the possibility of the
vanishingly unlikely case where we have a race between two concurrent
unmappers splitting the same block entry. The logic to handle this is
fairly straightforward - whoever loses the race frees their partial
next-level table and instead dereferences the winner's newly-installed
entry in order to fall back to a regular unmap, which intentionally
echoes the pre-existing case of recursively splitting a 1GB block down
to 4KB pages by installing a full table of 2MB blocks first.
Unfortunately, the chump who implemented that logic failed to update the
condition check for that fallback, meaning that if said race occurs at
the last level (where the loser's unmap_idx is valid) then the unmap
won't actually happen. Fix that to properly account for both the race
and recursive cases.
Fixes: 2c3d273eab ("iommu/io-pgtable-arm: Support lockless operation")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: re-jig control flow to avoid duplicate cmpxchg test]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This
has the side effect of defaulting to iterating using "cpu" node names in
preference to the deprecated (for FDT) device_type == "cpu".
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Introduces a new AP device driver. This device driver
is built on the VFIO mediated device framework. The framework
provides sysfs interfaces that facilitate passthrough
access by guests to devices installed on the linux host.
The VFIO AP device driver will serve two purposes:
1. Provide the interfaces to reserve AP devices for exclusive
use by KVM guests. This is accomplished by unbinding the
devices to be reserved for guest usage from the zcrypt
device driver and binding them to the VFIO AP device driver.
2. Implements the functions, callbacks and sysfs attribute
interfaces required to create one or more VFIO mediated
devices each of which will be used to configure the AP
matrix for a guest and serve as a file descriptor
for facilitating communication between QEMU and the
VFIO AP device driver.
When the VFIO AP device driver is initialized:
* It registers with the AP bus for control of type 10 (CEX4
and newer) AP queue devices. This limitation was imposed
due to:
1. A desire to keep the code as simple as possible;
2. Some older models are no longer supported by the kernel
and others are getting close to end of service.
3. A lack of older systems on which to test older devices.
The probe and remove callbacks will be provided to support
the binding/unbinding of AP queue devices to/from the VFIO
AP device driver.
* Creates a matrix device, /sys/devices/vfio_ap/matrix,
to serve as the parent of the mediated devices created, one
for each guest, and to hold the APQNs of the AP devices bound to
the VFIO AP device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
ACPI HID devices do not actually have an alias for
them in the IVRS. But dev_data->alias is still used
for indexing into the IOMMU device table for devices
being handled by the IOMMU. So for ACPI HID devices,
we simply return the corresponding devid as an alias,
as parsed from IVRS table.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Fixes: 2bf9a0a127 ('iommu/amd: Add iommu support for ACPI HID devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since these are trivially handled by the .domain_{get,set}_attr
callbacks when relevant, we can streamline struct iommu_ops for
everyone.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The external interface to get/set window attributes is already
abstracted behind iommu_domain_{get,set}_attr(), so there's no real
reason for the internal interface to be different. Since we only have
one window-based driver anyway, clean up the core code by just moving
the DOMAIN_ATTR_WINDOWS handling directly into the PAMU driver.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a new config option CONFIG_INTEL_IOMMU_DEBUGFS and do the base
enabling for Intel IOMMU debugfs.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Co-Developed-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To reuse the static functions and the struct declarations, move them to
corresponding header files and export the needed functions.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pasid table memory allocation could return failure due to memory
shortage. Limit the pasid table size to 1MiB because current 8MiB
contiguous physical memory allocation can be hard to come by. W/o
a PASID table, the device could continue to work with only shared
virtual memory impacted. So, let's go ahead with context mapping
even the memory allocation for pasid table failed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107783
Fixes: cc580e4126 ("iommu/vt-d: Per PCI device pasid table interfaces")
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-and-tested-by: Pelton Kyle D <kyle.d.pelton@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Trivial fix to spelling mistake in variable name
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the iommu's shutdown handler we disable runtime-pm which could
result in the irq-handler running unclocked and since commit
3fc7c5c0cf ("iommu/rockchip: Handle errors returned from PM framework")
we warn about that fact.
This can cause warnings on shutdown on some Rockchip machines, so
free the irqs in the shutdown handler before we disable runtime-pm.
Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Fixes: 3fc7c5c0cf ("iommu/rockchip: Handle errors returned from PM framework")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Most parts of iommu-dma already assume they are operating on a default
domain set up by iommu_dma_init_domain(), and can be converted straight
over to avoid the refcounting bottleneck. MSI page mappings may be in
an unmanaged domain with an explicit MSI-only cookie, so retain the
non-specific lookup, but that's OK since they're far from a contended
fast path either way.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While iommu_get_domain_for_dev() is the robust way for arbitrary IOMMU
API callers to retrieve the domain pointer, for DMA ops domains it
doesn't scale well for large systems and multi-queue devices, since the
momentary refcount adjustment will lead to exclusive cacheline contention
when multiple CPUs are operating in parallel on different mappings for
the same device.
In the case of DMA ops domains, however, this refcounting is actually
unnecessary, since they already imply that the group exists and is
managed by platform code and IOMMU internals (by virtue of
iommu_group_get_for_dev()) such that a reference will already be held
for the lifetime of the device. Thus we can avoid the bottleneck by
providing a fast lookup specifically for the DMA code to retrieve the
default domain it already knows it has set up - a simple read-only
dereference plays much nicer with cache-coherency protocols.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As an optimisation for PCI devices, there is always first attempt
been made to allocate iova from SAC address range. This will lead
to unnecessary attempts, when there are no free ranges
available. Adding fix to track recently failed iova address size and
allow further attempts, only if requested size is lesser than a failed
size. The size is updated when any replenish happens.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement bus specific support for the fsl-mc bus including
registering arm_smmu_ops and bus specific device add operations.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With of_pci_map_rid available for all the busses, use the function
for configuration of devices on fsl-mc bus
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu-map property is also used by devices with fsl-mc. This
patch moves the of_pci_map_rid to generic location, so that it
can be used by other busses too.
'of_pci_map_rid' is renamed here to 'of_map_rid' and there is no
functional change done in the API.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ia64 currently explicitly assigns it to dma_ops, but that same work is
already done by intel_iommu_init a little later, so we can remove the
duplicate assignment and mark the variable static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The generic dma_direct_supported helper already used by intel-iommu on
x86 does a better job than the ia64 reimplementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
A couple of late-merged changes that would be useful to get in this
merge window:
- Driver support for reset of audio complex on Meson platforms. The
audio driver went in this merge window, and these changes have been
in -next for a while (just not in our tree).
- Power management fixes for IOMMU on Rockchip platforms, getting
closer to kexec working on them, including Chromebooks.
- Another pass updating "arm,psci" -> "psci" for some properties that
have snuck in since last time it was done.
-----BEGIN PGP SIGNATURE-----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=dQaG
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson:
"A couple of late-merged changes that would be useful to get in this
merge window:
- Driver support for reset of audio complex on Meson platforms. The
audio driver went in this merge window, and these changes have been
in -next for a while (just not in our tree).
- Power management fixes for IOMMU on Rockchip platforms, getting
closer to kexec working on them, including Chromebooks.
- Another pass updating "arm,psci" -> "psci" for some properties that
have snuck in since last time it was done"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
iommu/rockchip: Move irq request past pm_runtime_enable
iommu/rockchip: Handle errors returned from PM framework
arm64: rockchip: Force CONFIG_PM on Rockchip systems
ARM: rockchip: Force CONFIG_PM on Rockchip systems
arm64: dts: Fix various entry-method properties to reflect documentation
reset: imx7: Fix always writing bits as 0
reset: meson: add meson audio arb driver
reset: meson: add dt-bindings for meson-axg audio arb
Including:
- PASID table handling updates for the Intel VT-d driver. It
implements a global PASID space now so that applications
usings multiple devices will just have one PASID.
- A new config option to make iommu passthroug mode the default.
- New sysfs attribute for iommu groups to export the type of the
default domain.
- A debugfs interface (for debug only) usable by IOMMU drivers
to export internals to user-space.
- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
- The ARM-SMMU now aborts transactions from unknown devices and
devices not attached to any domain.
- Various cleanups and smaller fixes all over the place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TeYQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- PASID table handling updates for the Intel VT-d driver. It implements
a global PASID space now so that applications usings multiple devices
will just have one PASID.
- A new config option to make iommu passthroug mode the default.
- New sysfs attribute for iommu groups to export the type of the
default domain.
- A debugfs interface (for debug only) usable by IOMMU drivers to
export internals to user-space.
- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
- The ARM-SMMU now aborts transactions from unknown devices and devices
not attached to any domain.
- Various cleanups and smaller fixes all over the place.
* tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
iommu/omap: Fix cache flushes on L2 table entries
iommu: Remove the ->map_sg indirection
iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel
iommu/arm-smmu-v3: Prevent any devices access to memory without registration
iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
iommu/ipmmu-vmsa: Clarify supported platforms
iommu/ipmmu-vmsa: Fix allocation in atomic context
iommu: Add config option to set passthrough as default
iommu: Add sysfs attribyte for domain type
iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register
iommu/arm-smmu: Error out only if not enough context interrupts
iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE
iommu/io-pgtable-arm: Fix pgtable allocation in selftest
iommu/vt-d: Remove the obsolete per iommu pasid tables
iommu/vt-d: Apply per pci device pasid table in SVA
iommu/vt-d: Allocate and free pasid table
iommu/vt-d: Per PCI device pasid table interfaces
iommu/vt-d: Add for_each_device_domain() helper
iommu/vt-d: Move device_domain_info to header
iommu/vt-d: Apply global PASID in SVA
...
Enabling the interrupt early, before power has been applied to the
device, can result in an interrupt being delivered too early if:
- the IOMMU shares an interrupt with a VOP
- the VOP has a pending interrupt (after a kexec, for example)
In these conditions, we end-up taking the interrupt without
the IOMMU being ready to handle the interrupt (not powered on).
Moving the interrupt request past the pm_runtime_enable() call
makes sure we can at least access the IOMMU registers. Note that
this is only a partial fix, and that the VOP interrupt will still
be screaming until the VOP driver kicks in, which advocates for
a more synchronized interrupt enabling/disabling approach.
Fixes: 0f181d3cf7 ("iommu/rockchip: Add runtime PM support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
pm_runtime_get_if_in_use can fail: either PM has been disabled
altogether (-EINVAL), or the device hasn't been enabled yet (0).
Sadly, the Rockchip IOMMU driver tends to conflate the two things
by considering a non-zero return value as successful.
This has the consequence of hiding other bugs, so let's handle this
case throughout the driver, with a WARN_ON_ONCE so that we can try
and work out what happened.
Fixes: 0f181d3cf7 ("iommu/rockchip: Add runtime PM support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge issue
reported. That merge issue is in fs/sysfs/group.c and Stephen has
posted the diff of what it should be to resolve this. I'll follow up
with that diff to this pull request.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g86Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyXQCePaZSW8wft4b7nLN8RdZ98ATBru0Ani10lrJa
HQeQJRNbWU1AZ0ym7695
=tOaH
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge
issue reported"
* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
base: core: Remove WARN_ON from link dependencies check
drivers/base: stop new probing during shutdown
drivers: core: Remove glue dirs from sysfs earlier
driver core: remove unnecessary function extern declare
sysfs.h: fix non-kernel-doc comment
PM / Domains: Stop deferring probe at the end of initcall
iommu: Remove IOMMU_OF_DECLARE
iommu: Stop deferring probe at end of initcalls
pinctrl: Support stopping deferred probe after initcalls
dt-bindings: pinctrl: add a 'pinctrl-use-default' property
driver core: allow stopping deferred probe after init
driver core: add a debugfs entry to show deferred devices
sysfs: Fix internal_create_group() for named group updates
base: fix order of OF initialization
linux/device.h: fix kernel-doc notation warning
Documentation: update firmware loader fallback reference
kobject: Replace strncpy with memcpy
drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
kernfs: Replace strncpy with memcpy
device: Add #define dev_fmt similar to #define pr_fmt
...
The CMA memory allocator doesn't support standard gfp flags for memory
allocation, so there is no point having it as a parameter for
dma_alloc_from_contiguous() function. Replace it by a boolean no_warn
argument, which covers all the underlaying cma_alloc() function
supports.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit dd65a941f6 ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").
Link: http://lkml.kernel.org/r/20180709122020eucas1p21a71b092975cb4a3b9954ffc63f699d1~-sqUFoa-h2939329393eucas1p2Y@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")
In this patch all the caller of handle_mm_fault() are changed to return
vm_fault_t type.
Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The base address used for DMA operations on the second-level table
did incorrectly include the offset for the table entry. The offset
was then added again which lead to incorrect behavior.
Operations on the L1 table are not affected.
The calculation of the base address is changed to point to the
beginning of the L2 table.
Fixes: bfee0cf0ee ("iommu/omap: Use DMA-API for performing cache flushes")
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ralf Goebel <ralf.goebel@imago-technologies.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All iommu drivers use the default_iommu_map_sg implementation, and there
is no good reason to ever override it. Just expose it as iommu_map_sg
directly and remove the indirection, specially in our post-spectre world
where indirect calls are horribly expensive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Take the new bus limit into account (when present) for IOVA allocations,
to accommodate those SoCs which integrate off-the-shelf IP blocks with
narrower interconnects such that the link between a device output and an
IOMMU input can truncate DMA addresses to even fewer bits than the
native size of either block's interface would imply.
Eventually it might make sense for the DMA core to apply this constraint
up-front in dma_set_mask() and friends, but for now this seems like the
least risky approach.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If we find that the SMMU is enabled during probe, we reset it by
re-initialising its registers and either enabling translation or placing
it into bypass based on the disable_bypass commandline option.
In the case of a kdump kernel, the SMMU won't have been shutdown cleanly
by the previous kernel and there may be concurrent DMA through the SMMU.
Rather than reset the SMMU to bypass, which would likely lead to rampant
data corruption, we can instead configure the SMMU to abort all incoming
transactions when we find that it is enabled from within a kdump kernel.
Reported-by: Sameer Goel <sgoel@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Stream bypass is a potential security hole since a malicious device can be
hotplugged in without matching any drivers, yet be granted the ability to
access all of physical memory.
Now that we attach devices to domains by default, we can toggle the
disable_bypass default to "on", preventing DMA from unknown devices.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This fixes kernel crashing on NVIDIA Tegra if kernel is compiled in
a multiplatform configuration and IPMMU-VMSA driver is enabled.
Cc: <stable@vger.kernel.org> # v3.20+
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Renesas IPMMU-VMSA driver supports not just R-Car H2 and M2 SoCs,
but also other R-Car Gen2 and R-Car Gen3 SoCs.
Drop a superfluous "Renesas" while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When attaching a device to an IOMMU group with
CONFIG_DEBUG_ATOMIC_SLEEP=y:
BUG: sleeping function called from invalid context at mm/slab.h:421
in_atomic(): 1, irqs_disabled(): 128, pid: 61, name: kworker/1:1
...
Call trace:
...
arm_lpae_alloc_pgtable+0x114/0x184
arm_64_lpae_alloc_pgtable_s1+0x2c/0x128
arm_32_lpae_alloc_pgtable_s1+0x40/0x6c
alloc_io_pgtable_ops+0x60/0x88
ipmmu_attach_device+0x140/0x334
ipmmu_attach_device() takes a spinlock, while arm_lpae_alloc_pgtable()
allocates memory using GFP_KERNEL. Originally, the ipmmu-vmsa driver
had its own custom page table allocation implementation using
GFP_ATOMIC, hence the spinlock was fine.
Fix this by replacing the spinlock by a mutex, like the arm-smmu driver
does.
Fixes: f20ed39f53 ("iommu/ipmmu-vmsa: Use the ARM LPAE page table allocator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the default behavior to be controlled by a kernel config
option instead of changing the commandline for the kernel to include
"iommu.passthrough=on" or "iommu=pt" on machines where this is desired.
Likewise, for machines where this config option is enabled, it can be
disabled at boot time with "iommu.passthrough=off" or "iommu=nopt".
Also corrected iommu=pt documentation for IA-64, since it has no code that
parses iommu= at all.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While we could print it at setup time, this is an easier way to match
each device to their default IOMMU allocation type.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When PRI queue occurs overflow, driver should update the OVACKFLG to
the PRIQ consumer register, otherwise subsequent PRI requests will not
be processed.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miao Zhong <zhongmiao@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently we check if the number of context banks is not equal to
num_context_interrupts. However, there are booloaders such as, one
on sdm845 that reserves few context banks and thus kernel views
less than the total available context banks.
So, although the hardware definition in device tree would mention
the correct number of context interrupts, this number can be
greater than the number of context banks visible to smmu in kernel.
We should therefore error out only when the number of context banks
is greater than the available number of context interrupts.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: drop useless printk]
Signed-off-by: Will Deacon <will.deacon@arm.com>
When run on a 64-bit system in selftest, the v7s driver may obtain page
table with physical addresses larger than 32-bit. Level-2 tables are 1KB
and are are allocated with slab, which doesn't accept the GFP_DMA32
flag. Currently map() truncates the address written in the PTE, causing
iova_to_phys() or unmap() to access invalid memory. Kasan reports it as
a use-after-free. To avoid any nasty surprise, test if the physical
address fits in a PTE before returning a new table. 32-bit systems,
which are the main users of this page table format, shouldn't see any
difference.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 4b123757ee ("iommu/io-pgtable-arm: Make allocations
NUMA-aware") added a NUMA hint to page table allocation, but the pgtable
selftest doesn't provide an SMMU device parameter. Since dev_to_node
doesn't accept a NULL argument, add a special case for selftest.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The obsolete per iommu pasid tables are no longer used. Hence,
clean up them.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch applies the per pci device pasid table in the Shared
Virtual Address (SVA) implementation.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch allocates a PASID table for a PCI device at the time
when the dmar dev_info is attached to dev->archdata.iommu, and
free it in the opposite case.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds the interfaces for per PCI device pasid
table management. Currently we allocate one pasid table
for all PCI devices under the scope of an IOMMU. It's
insecure in some cases where multiple devices under one
single IOMMU unit support PASID features. With per PCI
device pasid table, we can achieve finer protection and
isolation granularity.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds a helper named for_each_device_domain() to iterate
over the elements in device_domain_list and invoke a callback
against each element. This allows to search the device_domain
list in other source files.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the per device iommu data and some helpers to be
used in other files.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch applies the global pasid name space in the shared
virtual address (SVA) implementation.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
idr_for_each_entry() is used to iteratte over idr elements
of a given type. It isn't suitable for the globle pasid idr
since the pasid idr consumer could specify different types
of pointers to bind with a pasid.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds the system wide PASID name space for the PASID
allocation. Currently we are using per IOMMU PASID name
spaces which are not suitable for some use cases. For an
example, one application (associated with a PASID) might
talk to two physical devices simultaneously while the two
devices could reside behind two different IOMMU units.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The WARN_ON() was introduced in commit 272e4f99e9 ("iommu/amd: WARN
when __[attach|detach]_device are called with irqs enabled") to ensure
that the domain->lock is taken in proper irqs disabled context. This
is required, because the domain->lock is taken as well in irq
context.
The proper context check by the WARN_ON() is redundant, because it is
already covered by LOCKDEP. When working with locks and changing
context, a run with LOCKDEP is required anyway and would detect the
wrong lock context.
Furthermore all callers for those functions are within the same file
and all callers acquire another lock which already disables interrupts.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The TTSEL bit of IMUCTRn register of R-Car Gen3 needs to be set
unused MMU context number even if uTLBs are disabled
(The MMUEN bit of IMUCTRn register = 0).
Since initial values of IMUCTRn.TTSEL on all IPMMU-domains are 0,
this patch adds a new feature "reserved_context" to reserve IPMMU
context number 0 as the unused MMU context.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit ab96746aaa.
The commit ab96746aaa ("iommu/vt-d: Clean up pasid quirk for
pre-production devices") triggers ECS mode on some platforms
which have broken ECS support. As the result, graphic device
will be inoperable on boot.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107017
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that we use the driver core to stop deferred probe for missing
drivers, IOMMU_OF_DECLARE can be removed.
This is slightly less optimal than having a list of built-in drivers in
that we'll now defer probe twice before giving up. This shouldn't have a
significant impact on boot times as past discussions about deferred
probe have given no evidence of deferred probe having a substantial
impact.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IOMMU subsystem has its own mechanism to not defer probe if driver
support is missing. Now that the driver core supports stopping deferring
probe if drivers aren't built-in (and probed), use the driver core
support so the IOMMU specific support can be removed.
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AMD IOMMU XT mode enables interrupt remapping with 32-bit destination
APIC ID, which is required for x2APIC. The feature is available when
the XTSup bit is set in the IOMMU Extended Feature register
and/or the IVHD Type 10h IOMMU Feature Reporting field.
For more information, please see section "IOMMU x2APIC Support" of
the AMD I/O Virtualization Technology (IOMMU) Specification.
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the driver only supports lower 32-bit of IOMMU Control register.
However, newer AMD IOMMU specification has extended this register
to 64-bit. Therefore, replace the accessing API with the 64-bit version.
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Support the r8a77970 (R-Car V3M) and r8a77995 (R-Car D3) IPMMUs by sharing
feature flags with r8a7795 (R-Car H3) and r8a7796 (R-Car M3-W). Also update
IOMMU_OF_DECLARE to hook up the compat strings.
Based on work for the r8a7796 by Magnus Damm
[rebased on v4.17]
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Support the r8a7796 IPMMU by sharing feature flags between
r8a7795 and r8a7796. Also update IOMMU_OF_DECLARE to hook
up the updated compat string.
[rebased on v4.17]
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Bump up the maximum numbers of micro-TLBS to 48.
Each IPMMU device instance get micro-TLB assignment via
the "iommus" property in DT. Older SoCs tend to use a
maximum number of 32 micro-TLBs per IPMMU instance however
newer SoCs such as r8a7796 make use of up to 48 micro-TLBs.
At this point no SoC specific handling is done to validate
the maximum number of micro-TLBs, and because of that the
DT information is assumed to be within correct range for
each particular SoC.
If needed in the future SoC specific feature flags can be
added to handle the maximum number of micro-TLBs without
requiring DT changes, however at this point this does not
seem necessary.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement a skeleton framework for debugfs support in the AMD
IOMMU. Add an AMD-specific Kconfig boolean that depends upon
general enablement of DebugFS in the IOMMU.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Provide base enablement for using debugfs to expose internal data of an
IOMMU driver. When called, create the /sys/kernel/debug/iommu directory.
Emit a strong warning at boot time to indicate that this feature is
enabled.
This function is called from iommu_init, and creates the initial DebugFS
directory. Drivers may then call iommu_debugfs_new_driver_dir() to
instantiate a device-specific directory to expose internal data.
It will return a pointer to the new dentry structure created in
/sys/kernel/debug/iommu, or NULL in the event of a failure.
Since the IOMMU driver can not be removed from the running system, there
is no need for an "off" function.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PFSID should be used in the invalidation descriptor for flushing
device IOTLBs on SRIOV VFs.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" <ashok.raj@intel.com>
Cc: "Lu Baolu" <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When SRIOV VF device IOTLB is invalidated, we need to provide
the PF source ID such that IOMMU hardware can gauge the depth
of invalidation queue which is shared among VFs. This is needed
when device invalidation throttle (DIT) capability is supported.
This patch adds bit definitions for checking and tracking PFSID.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" <ashok.raj@intel.com>
Cc: "Lu Baolu" <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Although the mapping has already been removed in the page table, it maybe
still exist in TLB. Suppose the freed IOVAs is reused by others before the
flush operation completed, the new user can not correctly access to its
meomory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Fixes: b1516a1465 ('iommu/amd: Implement flush queue')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Argument "page_size" passing to function "fetch_pte" could be
uninitialized if the function returns NULL
The caller "iommu_unmap_page" checks the return value but the page_size is
used outside the if block.
Signed-off-by: yzhai003@ucr.edu <yzhai003@ucr.edu>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This commit may cause a less than required dma mask to be used for
some allocations, which apparently leads to module load failures for
iwlwifi sometimes.
This reverts commit d657c5c73c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Fabio Coatti <fabio.coatti@gmail.com>
Tested-by: Fabio Coatti <fabio.coatti@gmail.com>
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=zUUp
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
This reverts commit b468620f2a.
It turns out that this broke drm on AMD platforms. Quoting Gabriel C:
"I can confirm reverting b468620f2a fixes
that issue for me.
The GPU is working fine with SME enabled.
Now with working GPU :) I can also confirm performance is back to
normal without doing any other workarounds"
Christan König analyzed it partially:
"As far as I analyzed it we now get an -ENOMEM from dma_alloc_attrs()
in drivers/gpu/drm/ttm/ttm_page_alloc_dma.c when IOMMU is enabled"
and Christoph Hellwig responded:
"I think the prime issue is that dma_direct_alloc respects the dma
mask. Which we don't need if actually using the iommu. This would be
mostly harmless exept for the the SEV bit high in the address that
makes the checks fail.
For now I'd say revert this commit for 4.17/4.18-rc and I'll look into
addressing these issues properly"
Reported-and-bisected-by: Gabriel C <nix.or.die@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org # v4.17
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 updates and fixes from Thomas Gleixner:
- Fix the (late) fallout from the vector management rework causing
hlist corruption and irq descriptor reference leaks caused by a
missing sanity check.
The straight forward fix triggered another long standing issue to
surface. The pre rework code hid the issue due to being way slower,
but now the chance that user space sees an EBUSY error return when
updating irq affinities is way higher, though quite a bunch of
userspace tools do not handle it properly despite the fact that EBUSY
could be returned for at least 10 years.
It turned out that the EBUSY return can be avoided completely by
utilizing the existing delayed affinity update mechanism for irq
remapped scenarios as well. That's a bit more error handling in the
kernel, but avoids fruitless fingerpointing discussions with tool
developers.
- Decouple PHYSICAL_MASK from AMD SME as its going to be required for
the upcoming Intel memory encryption support as well.
- Handle legacy device ACPI detection properly for newer platforms
- Fix the wrong argument ordering in the vector allocation tracepoint
- Simplify the IDT setup code for the APIC=n case
- Use the proper string helpers in the MTRR code
- Remove a stale unused VDSO source file
- Convert the microcode update lock to a raw spinlock as its used in
atomic context.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Enable CMT and MBM on new Skylake stepping
x86/apic/vector: Print APIC control bits in debugfs
genirq/affinity: Defer affinity setting if irq chip is busy
x86/platform/uv: Use apic_ack_irq()
x86/ioapic: Use apic_ack_irq()
irq_remapping: Use apic_ack_irq()
x86/apic: Provide apic_ack_irq()
genirq/migration: Avoid out of line call if pending is not set
genirq/generic_pending: Do not lose pending affinity update
x86/apic/vector: Prevent hlist corruption and leaks
x86/vector: Fix the args of vector_alloc tracepoint
x86/idt: Simplify the idt_setup_apic_and_irq_gates()
x86/platform/uv: Remove extra parentheses
x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME
x86: Mark native_set_p4d() as __always_inline
x86/microcode: Make the late update update_lock a raw lock for RT
x86/mtrr: Convert to use strncpy_from_user() helper
x86/mtrr: Convert to use match_string() helper
x86/vdso: Remove unused file
x86/i8237: Register device based on FADT legacy boot flag
Nothing big this time. In particular:
- Debugging code for Tegra-GART
- Improvement in Intel VT-d fault printing to prevent
soft-lockups when on fault storms
- Improvements in AMD IOMMU event reporting
- NUMA aware allocation in io-pgtable code for ARM
- Various other small fixes and cleanups all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ndW8
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"Nothing big this time. In particular:
- Debugging code for Tegra-GART
- Improvement in Intel VT-d fault printing to prevent soft-lockups
when on fault storms
- Improvements in AMD IOMMU event reporting
- NUMA aware allocation in io-pgtable code for ARM
- Various other small fixes and cleanups all over the place"
* tag 'iommu-updates-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/io-pgtable-arm: Make allocations NUMA-aware
iommu/amd: Prevent possible null pointer dereference and infinite loop
iommu/amd: Fix grammar of comments
iommu: Clean up the comments for iommu_group_alloc
iommu/vt-d: Remove unnecessary parentheses
iommu/vt-d: Clean up pasid quirk for pre-production devices
iommu/vt-d: Clean up unused variable in find_or_alloc_domain
iommu/vt-d: Fix iotlb psi missing for mappings
iommu/vt-d: Introduce __mapping_notify_one()
iommu: Remove extra NULL check when call strtobool()
iommu/amd: Update logging information for new event type
iommu/amd: Update the PASID information printed to the system log
iommu/tegra: gart: Fix gart_iommu_unmap()
iommu/tegra: gart: Add debugging facility
iommu/io-pgtable-arm: Use for_each_set_bit to simplify code
iommu/qcom: Simplify getting .drvdata
iommu: Remove depends on HAS_DMA in case of platform dependency
iommu/vt-d: Ratelimit each dmar fault printing
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlsZdg0UHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vwJOBAAsuuWsOdiJRRhQLU5WfEMFgzcL02R
gsumqZkK7E8LOq0DPNMtcgv9O0KgYZyCiZyTMJ8N7sEYohg04lMz8mtYXOibjcwI
p+nVMko8jQXV9FXwSMGVqigEaLLcrbtkbf/mPriD63DDnRMa/+/Jh15SwfLTydIH
QRTJbIxkS3EiOauj5C8QY3UwzjlvV9mDilzM/x+MSK27k2HFU9Pw/3lIWHY716rr
grPZTwBTfIT+QFZjwOm6iKzHjxRM830sofXARkcH4CgSNaTeq5UbtvAs293MHvc+
v/v/1dfzUh00NxfZDWKHvTUMhjazeTeD9jEVS7T+HUcGzvwGxMSml6bBdznvwKCa
46ynePOd1VcEBlMYYS+P4njRYBLWeUwt6/TzqR4yVwb0keQ6Yj3Y9H2UpzscYiCl
O+0qz6RwyjKY0TpxfjoojgHn4U5ByI5fzVDJHbfr2MFTqqRNaabVrfl6xU4sVuhh
OluT5ym+/dOCTI/wjlolnKNb0XThVre8e2Busr3TRvuwTMKMIWqJ9sXLovntdbqE
furPD/UnuZHkjSFhQ1SQwYdWmsZI5qAq2C9haY8sEWsXEBEcBGLJ2BEleMxm8UsL
KXuy4ER+R4M+sFtCkoWf3D4NTOBUdPHi4jyk6Ooo1idOwXCsASVvUjUEG5YcQC6R
kpJ1VPTKK1XN64I=
=aFAi
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- unify AER decoding for native and ACPI CPER sources (Alexandru
Gagniuc)
- add TLP header info to AER tracepoint (Thomas Tai)
- add generic pcie_wait_for_link() interface (Oza Pawandeep)
- handle AER ERR_FATAL by removing and re-enumerating devices, as
Downstream Port Containment does (Oza Pawandeep)
- factor out common code between AER and DPC recovery (Oza Pawandeep)
- stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep)
- share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep)
- disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)
- respect platform ownership of LTR (Bjorn Helgaas)
- clear interrupt status in top half to avoid interrupt storm (Oza
Pawandeep)
- neaten pci=earlydump output (Andy Shevchenko)
- avoid errors when extended config space inaccessible (Gilles Buloz)
- prevent sysfs disable of device while driver attached (Christoph
Hellwig)
- use core interface to report PCIe link properties in bnx2x, bnxt_en,
cxgb4, ixgbe (Bjorn Helgaas)
- remove unused pcie_get_minimum_link() (Bjorn Helgaas)
- fix use-before-set error in ibmphp (Dan Carpenter)
- fix pciehp timeouts caused by Command Completed errata (Bjorn
Helgaas)
- fix refcounting in pnv_php hotplug (Julia Lawall)
- clear pciehp Presence Detect and Data Link Layer Status Changed on
resume so we don't miss hotplug events (Mika Westerberg)
- only request pciehp control if we support it, so platform can use
ACPI hotplug otherwise (Mika Westerberg)
- convert SHPC to be builtin only (Mika Westerberg)
- request SHPC control via _OSC if we support it (Mika Westerberg)
- simplify SHPC handoff from firmware (Mika Westerberg)
- fix an SHPC quirk that mistakenly included *all* AMD bridges as well
as devices from any vendor with device ID 0x7458 (Bjorn Helgaas)
- assign a bus number even to non-native hotplug bridges to leave
space for acpiphp additions, to fix a common Thunderbolt xHCI
hot-add failure (Mika Westerberg)
- keep acpiphp from scanning native hotplug bridges, to fix common
Thunderbolt hot-add failures (Mika Westerberg)
- improve "partially hidden behind bridge" messages from core (Mika
Westerberg)
- add macros for PCIe Link Control 2 register (Frederick Lawler)
- replace IB/hfi1 custom macros with PCI core versions (Frederick
Lawler)
- remove dead microblaze and xtensa code (Bjorn Helgaas)
- use dev_printk() when possible in xtensa and mips (Bjorn Helgaas)
- remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn
Helgaas)
- add managed interface to get PCI host bridge resources from OF (Jan
Kiszka)
- add support for unbinding generic PCI host controller (Jan Kiszka)
- fix memory leaks when unbinding generic PCI host controller (Jan
Kiszka)
- request legacy VGA framebuffer only for VGA devices to avoid false
device conflicts (Bjorn Helgaas)
- turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device()
like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)
- add generic enable function for simple SR-IOV hardware (Alexander
Duyck)
- use generic SR-IOV enable for ena, nvme (Alexander Duyck)
- add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)
- add ACS quirk for Intel 300 series (Mika Westerberg)
- enable register clock for Armada 7K/8K (Gregory CLEMENT)
- reduce Keystone "link already up" log level (Fabio Estevam)
- move private DT functions to drivers/pci/ (Rob Herring)
- factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)
- add DesignWare support to the endpoint test driver (Gustavo
Pimentel)
- add DesignWare support for endpoint mode (Gustavo Pimentel)
- use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
artpec6 (Gustavo Pimentel)
- fix Qualcomm bitwise NOT issue (Dan Carpenter)
- add Qualcomm runtime PM support (Srinivas Kandagatla)
- fix DesignWare enumeration below bridges (Koen Vandeputte)
- use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)
- add configfs entries for pci_epf_driver device IDs (Kishon Vijay
Abraham I)
- clean up pci_endpoint_test driver (Gustavo Pimentel)
- update Layerscape maintainer email addresses (Minghuan Lian)
- add COMPILE_TEST to improve build test coverage (Rob Herring)
- fix Hyper-V bus registration failure caused by domain/serial number
confusion (Sridhar Pitchai)
- improve Hyper-V refcounting and coding style (Stephen Hemminger)
- avoid potential Hyper-V hang waiting for a response that will never
come (Dexuan Cui)
- implement Mediatek chained IRQ handling (Honghui Zhang)
- fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)
- add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)
- add Mobiveil MSI support (Subrahmanya Lingappa)
- clean up clocks, MSI, IRQ mappings in R-Car probe failure paths
(Marek Vasut)
- poll more frequently (5us vs 5ms) while waiting for R-Car data link
active (Marek Vasut)
- use generic OF parsing interface in R-Car (Vladimir Zapolskiy)
- add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)
- add R-Car gen3 PHY support (Sergei Shtylyov)
- improve R-Car PHYRDY polling (Sergei Shtylyov)
- clean up R-Car macros (Marek Vasut)
- use runtime PM for R-Car controller clock (Dien Pham)
- update arm64 defconfig for Rockchip (Shawn Lin)
- refactor Rockchip code to facilitate both root port and endpoint
mode (Shawn Lin)
- add Rockchip endpoint mode driver (Shawn Lin)
- support VMD "membar shadow" feature (Jon Derrick)
- support VMD bus number offsets (Jon Derrick)
- add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)
- remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
selections (Bjorn Helgaas)
- clean up quirks.c organization and whitespace (Bjorn Helgaas)
* tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits)
PCI/AER: Replace struct pcie_device with pci_dev
PCI/AER: Remove unused parameters
PCI: qcom: Include gpio/consumer.h
PCI: Improve "partially hidden behind bridge" log message
PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
PCI: Move resource distribution for single bridge outside loop
PCI: Account for all bridges on bus when distributing bus numbers
ACPI / hotplug / PCI: Drop unnecessary parentheses
ACPI / hotplug / PCI: Mark stale PCI devices disconnected
ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
PCI: hotplug: Add hotplug_is_native()
PCI: shpchp: Add shpchp_is_native()
PCI: shpchp: Fix AMD POGO identification
PCI: mobiveil: Add MSI support
PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
PCI/AER: Decode Error Source Requester ID
PCI/AER: Remove aer_recover_work_func() forward declaration
PCI/DPC: Use the generic pcie_do_fatal_recovery() path
PCI/AER: Pass service type to pcie_do_fatal_recovery()
PCI/DPC: Disable ERR_NONFATAL handling by DPC
...
To address the EBUSY fail of interrupt affinity settings in case that the
previous setting has not been cleaned up yet, use the new apic_ack_irq()
function instead of the special ir_ack_apic_edge() implementation which is
merily a wrapper around ack_APIC_irq().
Preparatory change for the real fix
Fixes: dccfe3147b ("x86/vector: Simplify vector move cleanup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.555716895@linutronix.de
- replaceme the force_dma flag with a dma_configure bus method.
(Nipun Gupta, although one patch is іncorrectly attributed to me
due to a git rebase bug)
- use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
- remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
right thing for bounce buffering.
- move dma-debug initialization to common code, and apply a few cleanups
to the dma-debug code.
- cleanup the Kconfig mess around swiotlb selection
- swiotlb comment fixup (Yisheng Xie)
- a trivial swiotlb fix. (Dan Carpenter)
- support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
- add a new generic dma-noncoherent dma_map_ops implementation and use
it for arc, c6x and nds32.
- improve scatterlist validity checking in dma-debug. (Robin Murphy)
- add a struct device quirk to limit the dma-mask to 32-bit due to
bridge/system issues, and switch x86 to use it instead of a local
hack for VIA bridges.
- handle devices without a dma_mask more gracefully in the dma-direct
code.
-----BEGIN PGP SIGNATURE-----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=6Acj
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- replace the force_dma flag with a dma_configure bus method. (Nipun
Gupta, although one patch is іncorrectly attributed to me due to a
git rebase bug)
- use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
- remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
right thing for bounce buffering.
- move dma-debug initialization to common code, and apply a few
cleanups to the dma-debug code.
- cleanup the Kconfig mess around swiotlb selection
- swiotlb comment fixup (Yisheng Xie)
- a trivial swiotlb fix. (Dan Carpenter)
- support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
- add a new generic dma-noncoherent dma_map_ops implementation and use
it for arc, c6x and nds32.
- improve scatterlist validity checking in dma-debug. (Robin Murphy)
- add a struct device quirk to limit the dma-mask to 32-bit due to
bridge/system issues, and switch x86 to use it instead of a local
hack for VIA bridges.
- handle devices without a dma_mask more gracefully in the dma-direct
code.
* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
dma-direct: don't crash on device without dma_mask
nds32: use generic dma_noncoherent_ops
nds32: implement the unmap_sg DMA operation
nds32: consolidate DMA cache maintainance routines
x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
x86/pci-dma: remove the explicit nodac and allowdac option
x86/pci-dma: remove the experimental forcesac boot option
Documentation/x86: remove a stray reference to pci-nommu.c
core, dma-direct: add a flag 32-bit dma limits
dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
dma-debug: check scatterlist segments
c6x: use generic dma_noncoherent_ops
arc: use generic dma_noncoherent_ops
arc: fix arc_dma_{map,unmap}_page
arc: fix arc_dma_sync_sg_for_{cpu,device}
arc: simplify arc_dma_sync_single_for_{cpu,device}
dma-mapping: provide a generic dma-noncoherent implementation
dma-mapping: simplify Kconfig dependencies
riscv: add swiotlb support
riscv: only enable ZONE_DMA32 for 64-bit
...
We would generally expect pagetables to be read by the IOMMU more than
written by the CPU, so in NUMA systems it makes sense to locate them
close to the former and avoid cross-node pagetable walks if at all
possible. As it turns out, we already have a handle on the IOMMU device
for the sake of coherency management, so it's trivial to grab the
appropriate NUMA node when allocating new pagetable pages.
Note that we drop the semantics of alloc_pages_exact(), but that's fine
since they have never been necessary: the only time we're allocating
more than one page is for stage 2 top-level concatenation, but since
that is based on the number of IPA bits, the size is always some exact
power of two anyway.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The check for !dev_data->domain in __detach_device() emits a warning and
returns. The calling code in detach_device() dereferences dev_data->domain
afterwards unconditionally, so in case that dev_data->domain is NULL the
warning will be immediately followed by a NULL pointer dereference.
The calling code in cleanup_domain() loops infinite when !dev_data->domain
and the check in __detach_device() returns immediately because dev_list is
not changed.
do_detach() duplicates this check without throwing a warning.
Move the check with the explanation of the do_detach() code into the caller
detach_device() and return immediately. Throw an error, when hitting the
condition in cleanup_domain().
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pasid28 quirk is needed only for some pre-production devices.
Remove it to make the code concise.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When caching mode is enabled for IOMMU, we should send explicit IOTLB
PSIs even for newly created mappings. However these events are missing
for all intel_iommu_map() callers, e.g., iommu_map(). One direct user
is the vfio-pci driver.
To make sure we'll send the PSIs always when necessary, this patch
firstly introduced domain_mapping() helper for page mappings, then fixed
the problem by generalizing the explicit map IOTLB PSI logic into that
new helper. With that, we let iommu_domain_identity_map() to use the
simplified version to avoid sending the notifications, while for all the
rest of cases we send the notifications always.
For VM case, we send the PSIs to all the backend IOMMUs for the domain.
This patch allows the nested device assignment to work with QEMU (assign
device firstly to L1 guest, then assign it again to L2 guest).
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce this new helper to notify one newly created mapping on one
single IOMMU. We can further leverage this helper in the next patch.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
strtobool() does check for NULL parameter already. No need to repeat.
While here, switch to kstrtobool() and unshadow actual error code
(which is still -EINVAL).
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Adds a "pci=noats" boot parameter. When supplied, all ATS related
functions fail immediately and the IOMMU is configured to not use
device-IOTLB.
Any function that checks for ATS capabilities directly against the devices
should also check this flag. Currently, such functions exist only in IOMMU
drivers, and they are covered by this patch.
The motivation behind this patch is the existence of malicious devices.
Lots of research has been done about how to use the IOMMU as protection
from such devices. When ATS is supported, any I/O device can access any
physical address by faking device-IOTLB entries. Adding the ability to
ignore these entries lets sysadmins enhance system security.
Signed-off-by: Gil Kupfer <gilkup@cs.technion.ac.il>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
This way we have one central definition of it, and user can select it as
needed. Note that we now also always select it when CONFIG_DMA_API_DEBUG
is select, which fixes some incorrect checks in a few network drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
We get a build error when compiling the iommu driver without CONFIG_OF:
drivers/iommu/rockchip-iommu.c: In function 'rk_iommu_of_xlate':
drivers/iommu/rockchip-iommu.c:1101:2: error: implicit declaration of function 'of_dev_put'; did you mean 'of_node_put'? [-Werror=implicit-function-declaration]
This replaces the of_dev_put() with the equivalent
platform_device_put().
Fixes: 5fd577c3ea ("iommu/rockchip: Use OF_IOMMU to attach devices automatically")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A new events have been defined in the AMD IOMMU spec:
0x09 - "invalid PPR request"
Add support for logging this type of event.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
~
~
~
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This pretty much reverts commit 273df96353 ("iommu/dma: Make PCI
window reservation generic") by moving the PCI window region
reservation back into the dma specific path so that these regions
doesn't get exposed via the IOMMU API interface. With this change,
the vfio interface will report only iommu specific reserved regions
to the user space.
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: 273df96353 ('iommu/dma: Make PCI window reservation generic')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu clocks are optional, so the driver should not fail if they are not
present. Instead just set the number of clocks to 0, which the clk-blk APIs
can handle just fine.
Fixes: f2e3a5f557 ("iommu/rockchip: Control clocks needed to access the IOMMU")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
