No solution yet for the stmmac issue mentioned in the last PR,
but it proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when pruning
states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0bH0
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
The intent is to allow libbpf to use SEC("?.struct_ops") to identify
struct_ops maps that are optional, e.g. like in the following BPF code:
SEC("?.struct_ops")
struct test_ops optional_map = { ... };
Which yields the following BTF:
...
[13] DATASEC '?.struct_ops' size=0 vlen=...
...
To load such BTF libbpf rewrites DATASEC name before load.
After this patch the rewrite won't be necessary.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-15-eddyz87@gmail.com
When open code iterators, bpf_loop or may_goto are used the following two
states are equivalent and safe to prune the search:
cur state: fp-8_w=scalar(id=3,smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=11,var_off=(0x0; 0xf))
old state: fp-8_rw=scalar(id=2,smin=umin=smin32=umin32=1,smax=umax=smax32=umax32=11,var_off=(0x0; 0xf))
In other words "exact" state match should ignore liveness and precision
marks, since open coded iterator logic didn't complete their propagation,
reg_old->type == NOT_INIT && reg_cur->type != NOT_INIT is also not safe to
prune while looping, but range_within logic that applies to scalars,
ptr_to_mem, map_value, pkt_ptr is safe to rely on.
Avoid doing such comparison when regular infinite loop detection logic is
used, otherwise bounded loop logic will declare such "infinite loop" as
false positive. Such example is in progs/verifier_loops1.c
not_an_inifinite_loop().
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-3-alexei.starovoitov@gmail.com
Introduce may_goto instruction that from the verifier pov is similar to
open coded iterators bpf_for()/bpf_repeat() and bpf_loop() helper, but it
doesn't iterate any objects.
In assembly 'may_goto' is a nop most of the time until bpf runtime has to
terminate the program for whatever reason. In the current implementation
may_goto has a hidden counter, but other mechanisms can be used.
For programs written in C the later patch introduces 'cond_break' macro
that combines 'may_goto' with 'break' statement and has similar semantics:
cond_break is a nop until bpf runtime has to break out of this loop.
It can be used in any normal "for" or "while" loop, like
for (i = zero; i < cnt; cond_break, i++) {
The verifier recognizes that may_goto is used in the program, reserves
additional 8 bytes of stack, initializes them in subprog prologue, and
replaces may_goto instruction with:
aux_reg = *(u64 *)(fp - 40)
if aux_reg == 0 goto pc+off
aux_reg -= 1
*(u64 *)(fp - 40) = aux_reg
may_goto instruction can be used by LLVM to implement __builtin_memcpy,
__builtin_strcmp.
may_goto is not a full substitute for bpf_for() macro.
bpf_for() doesn't have induction variable that verifiers sees,
so 'i' in bpf_for(i, 0, 100) is seen as imprecise and bounded.
But when the code is written as:
for (i = 0; i < 100; cond_break, i++)
the verifier see 'i' as precise constant zero,
hence cond_break (aka may_goto) doesn't help to converge the loop.
A static or global variable can be used as a workaround:
static int zero = 0;
for (i = zero; i < 100; cond_break, i++) // works!
may_goto works well with arena pointers that don't need to be bounds
checked on access. Load/store from arena returns imprecise unbounded
scalar and loops with may_goto pass the verifier.
Reserve new opcode BPF_JMP | BPF_JCOND for may_goto insn.
JCOND stands for conditional pseudo jump.
Since goto_or_nop insn was proposed, it may use the same opcode.
may_goto vs goto_or_nop can be distinguished by src_reg:
code = BPF_JMP | BPF_JCOND
src_reg = 0 - may_goto
src_reg = 1 - goto_or_nop
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-2-alexei.starovoitov@gmail.com
When loading segments, ubytes is <= mbytes. When ubytes is exhausted,
there could be remaining mbytes. Then in the while loop, the buf pointer
advancing with mchunk will causing meaningless reading even though it
doesn't harm.
So let's change to make sure that all of the copying and the rest only
happens before uchunk goes to zero.
Link: https://lkml.kernel.org/r/20240222092119.5602-1-gaoshanliukou@163.com
Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This initialization is incomplete and unnecessary, neither do_group_exit()
nor PF_USER_WORKER need ksig->info.
Link: https://lkml.kernel.org/r/20240226165653.GA20834@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ksig->ka and ksig->info are not initialized if get_signal() returns 0 or
if the caller is PF_USER_WORKER.
Check signr != 0 before SA_EXPOSE_TAGBITS and move the "out" label down.
The latter means that ksig->sig won't be initialized if a PF_USER_WORKER
thread gets a fatal signal but this is fine, PF_USER_WORKER's don't use
ksig. And there is nothing new, in this case ksig->ka and ksig-info are
not initialized anyway. Add a comment.
Link: https://lkml.kernel.org/r/20240226165650.GA20829@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "get_signal: minor cleanups and fix".
Lets remove this clear_siginfo() right now. It is incomplete (and thus
looks confusing) and unnecessary. Also, PF_USER_WORKER's already don't
get a fully initialized ksig anyway.
This patch (of 3):
Cleanup and preparation for the next changes.
get_signal() uses signr or ksig->info.si_signo or ksig->sig in a chaotic
way, this looks confusing. Change it to always use signr.
Link: https://lkml.kernel.org/r/20240226165612.GA20787@redhat.com
Link: https://lkml.kernel.org/r/20240226165647.GA20826@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
different nodes Date: Thu, 22 Feb 2024 22:04:17 +0800
When a group of tasks that access different nodes are scheduled on the
same node, they may encounter bandwidth bottlenecks and access latency.
Thus, numa_aware flag is introduced here, allowing tasks to be distributed
across different nodes to fully utilize the advantage of multi-node
systems.
Link: https://lkml.kernel.org/r/20240222140422.393911-5-gang.li@linux.dev
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Limit the max print event of trace_marker to just 4K string size. This must
also be less than the amount that can be held by a trace_seq along with
the text that is before the output (like the task name, PID, CPU, state,
etc). As trace_seq is made to handle large events (some greater than 4K).
Make the max size of a trace_marker write event be 4K which is guaranteed
to fit in the trace_seq buffer.
Link: https://lore.kernel.org/linux-trace-kernel/20240304223433.4ba47dff@gandalf.local.home
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Support accessing $argN in the return probe events. This will help users to
record entry data in function return (exit) event for simplfing the function
entry/exit information in one event, and record the result values (e.g.
allocated object/initialized object) at function exit.
For example, if we have a function `int init_foo(struct foo *obj, int param)`
sometimes we want to check how `obj` is initialized. In such case, we can
define a new return event like below;
# echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events
Thus it records the function parameter `param` and its result `obj->field1`
(the dereference will be done in the function exit timing) value at once.
This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF
is enabled, we can trace both function parameters and the return value
by following command.
# echo 'f target_function%return $arg* $retval' >> dynamic_events
Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Instead of incrementing the trace_probe::nr_args, init it at
trace_probe_init(). Without this change, there is no way to get the number
of trace_probe arguments while parsing it.
This is a cleanup, so the behavior is not changed.
Link: https://lore.kernel.org/all/170952363585.229804.13060759900346411951.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cleanup traceprobe_parse_probe_arg_body() to split out the
type parser and post-processing part of fetch_insn.
This makes no functional change.
Link: https://lore.kernel.org/all/170952362603.229804.9942703761682605372.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a CPU is the last active in the hierarchy and it tries to enter
into idle, the quick check looking up the next event towards cpuidle
heuristics may report a too late expiry, such as in the following
scenario:
[GRP1:0]
migrator = NONE
active = NONE
nextevt = T0:0, T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = NONE migrator = NONE
active = NONE active = NONE
nextevt = T0, T1 nextevt = T2
/ \ / \
0 1 2 3
idle idle idle idle
0) The whole system is idle, and CPU 0 was the last migrator. CPU 0 has
a timer (T0), CPU 1 has a timer (T1) and CPU 2 has a timer (T2). The
expire order is T0 < T1 < T2.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:0(i), T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU0 migrator = NONE
active = CPU0 active = NONE
nextevt = T0(i), T1 nextevt = T2
/ \ / \
0 1 2 3
active idle idle idle
1) CPU 0 becomes active. The (i) means a now ignored timer.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU0 migrator = NONE
active = CPU0 active = NONE
nextevt = T1 nextevt = T2
/ \ / \
0 1 2 3
active idle idle idle
2) CPU 0 handles remote. No timer actually expired but ignored timers
have been cleaned out and their sibling's timers haven't been
propagated. As a result the top level's next event is T2 and not T1.
3) CPU 0 tries to enter idle without any global timer enqueued and calls
tmigr_quick_check(). The expiry of T2 is returned instead of the
expiry of T1.
When the quick check returns an expiry that is too late, the cpuidle
governor may pick up a C-state that is too deep. This may be result into
undesired CPU wake up latency if the next timer is actually close enough.
Fix this with assuming that expiries aren't sorted top-down while
performing the quick check. Pick up instead the earliest encountered one
while walking up the hierarchy.
7ee9887703 ("timers: Implement the hierarchical pull model")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240305002822.18130-1-frederic@kernel.org
When running an XDP program that is attached to a cpumap entry, we don't
initialise the xdp_rxq_info data structure being used in the xdp_buff
that backs the XDP program invocation. Tobias noticed that this leads to
random values being returned as the xdp_md->rx_queue_index value for XDP
programs running in a cpumap.
This means we're basically returning the contents of the uninitialised
memory, which is bad. Fix this by zero-initialising the rxq data
structure before running the XDP program.
Fixes: 9216477449 ("bpf: cpumap: Add the possibility to attach an eBPF program to cpumap")
Reported-by: Tobias Böhm <tobias@aibor.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240305213132.11955-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When comparing current and cached states verifier should consider
bpf_func_state->callback_depth. Current state cannot be pruned against
cached state, when current states has more iterations left compared to
cached state. Current state has more iterations left when it's
callback_depth is smaller.
Below is an example illustrating this bug, minimized from mailing list
discussion [0] (assume that BPF_F_TEST_STATE_FREQ is set).
The example is not a safe program: if loop_cb point (1) is followed by
loop_cb point (2), then division by zero is possible at point (4).
struct ctx {
__u64 a;
__u64 b;
__u64 c;
};
static void loop_cb(int i, struct ctx *ctx)
{
/* assume that generated code is "fallthrough-first":
* if ... == 1 goto
* if ... == 2 goto
* <default>
*/
switch (bpf_get_prandom_u32()) {
case 1: /* 1 */ ctx->a = 42; return 0; break;
case 2: /* 2 */ ctx->b = 42; return 0; break;
default: /* 3 */ ctx->c = 42; return 0; break;
}
}
SEC("tc")
__failure
__flag(BPF_F_TEST_STATE_FREQ)
int test(struct __sk_buff *skb)
{
struct ctx ctx = { 7, 7, 7 };
bpf_loop(2, loop_cb, &ctx, 0); /* 0 */
/* assume generated checks are in-order: .a first */
if (ctx.a == 42 && ctx.b == 42 && ctx.c == 7)
asm volatile("r0 /= 0;":::"r0"); /* 4 */
return 0;
}
Prior to this commit verifier built the following checkpoint tree for
this example:
.------------------------------------- Checkpoint / State name
| .-------------------------------- Code point number
| | .---------------------------- Stack state {ctx.a,ctx.b,ctx.c}
| | | .------------------- Callback depth in frame #0
v v v v
- (0) {7P,7P,7},depth=0
- (3) {7P,7P,7},depth=1
- (0) {7P,7P,42},depth=1
- (3) {7P,7,42},depth=2
- (0) {7P,7,42},depth=2 loop terminates because of depth limit
- (4) {7P,7,42},depth=0 predicted false, ctx.a marked precise
- (6) exit
(a) - (2) {7P,7,42},depth=2
- (0) {7P,42,42},depth=2 loop terminates because of depth limit
- (4) {7P,42,42},depth=0 predicted false, ctx.a marked precise
- (6) exit
(b) - (1) {7P,7P,42},depth=2
- (0) {42P,7P,42},depth=2 loop terminates because of depth limit
- (4) {42P,7P,42},depth=0 predicted false, ctx.{a,b} marked precise
- (6) exit
- (2) {7P,7,7},depth=1 considered safe, pruned using checkpoint (a)
(c) - (1) {7P,7P,7},depth=1 considered safe, pruned using checkpoint (b)
Here checkpoint (b) has callback_depth of 2, meaning that it would
never reach state {42,42,7}.
While checkpoint (c) has callback_depth of 1, and thus
could yet explore the state {42,42,7} if not pruned prematurely.
This commit makes forbids such premature pruning,
allowing verifier to explore states sub-tree starting at (c):
(c) - (1) {7,7,7P},depth=1
- (0) {42P,7,7P},depth=1
...
- (2) {42,7,7},depth=2
- (0) {42,42,7},depth=2 loop terminates because of depth limit
- (4) {42,42,7},depth=0 predicted true, ctx.{a,b,c} marked precise
- (5) division by zero
[0] https://lore.kernel.org/bpf/9b251840-7cb8-4d17-bd23-1fc8071d8eef@linux.dev/
Fixes: bb124da69c ("bpf: keep track of max number of bpf_loop callback iterations")
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240222154121.6991-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Two cpuset fixes. Both are for bugs in error handling paths and low risk.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZeeUSA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGaTjAQC+6pLyiH2j2XpncJ2BFID+LA5ljExmJpcRv/yb
YAerogEA+QmOz6poIo+VO+qy+uoFxklarGY8fj1wFKXYeNsuJgw=
=/5Ll
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.8-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Two cpuset fixes. Both are for bugs in error handling paths and low
risk"
* tag 'cgroup-for-6.8-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix retval in update_cpumask()
cgroup/cpuset: Fix a memory leak in update_exclusive_cpumask()
During the handoff from earlycon to the real console driver, we have
two separate drivers operating on the same device concurrently. In the
case of the 8250 driver these concurrent accesses cause problems due
to the driver's use of banked registers, controlled by LCR.DLAB. It is
possible for the setup(), config_port(), pm() and set_mctrl() callbacks
to set DLAB, which can cause the earlycon code that intends to access
TX to instead access DLL, leading to missed output and corruption on
the serial line due to unintended modifications to the baud rate.
In particular, for setup() we have:
univ8250_console_setup()
-> serial8250_console_setup()
-> uart_set_options()
-> serial8250_set_termios()
-> serial8250_do_set_termios()
-> serial8250_do_set_divisor()
For config_port() we have:
serial8250_config_port()
-> autoconfig()
For pm() we have:
serial8250_pm()
-> serial8250_do_pm()
-> serial8250_set_sleep()
For set_mctrl() we have (for some devices):
serial8250_set_mctrl()
-> omap8250_set_mctrl()
-> __omap8250_set_mctrl()
To avoid such problems, let's make it so that the console is locked
during pre-registration calls to these callbacks, which will prevent
the earlycon driver from running concurrently.
Remove the partial solution to this problem in the 8250 driver
that locked the console only during autoconfig_irq(), as this would
result in a deadlock with the new approach. The console continues
to be locked during autoconfig_irq() because it can only be called
through uart_configure_port().
Although this patch introduces more locking than strictly necessary
(and in particular it also locks during the call to rs485_config()
which is not affected by this issue as far as I can tell), it follows
the principle that it is the responsibility of the generic console
code to manage the earlycon handoff by ensuring that earlycon and real
console driver code cannot run concurrently, and not the individual
drivers.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://linux-review.googlesource.com/id/I7cf8124dcebf8618e6b2ee543fa5b25532de55d8
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240304214350.501253-1-pcc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In memory_model.h, if CONFIG_SPARSEMEM_VMEMMAP is configed, kernel will
use vmemmap to do the __pfn_to_page/page_to_pfn, and kernel will not use
the "classic sparse" to do the __pfn_to_page/page_to_pfn.
So export the vmemmap when CONFIG_SPARSEMEM_VMEMMAP is configed. This
makes the user applications (crash, etc) get faster
pfn_to_page/page_to_pfn operations too.
Link: https://lkml.kernel.org/r/20240227014952.3184-1-shijie@os.amperecomputing.com
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Kazuhito Hagio <k-hagio-ab@nec.com>
Cc: Lianbo Jiang <lijiang@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The synchronization here is to ensure the ordering of freeing of a module
init so that it happens before W+X checking. It is worth noting it is not
that the freeing was not happening, it is just that our sanity checkers
raced against the permission checkers which assume init memory is already
gone.
Commit 1a7b7d9220 ("modules: Use vmalloc special flag") moved calling
do_free_init() into a global workqueue instead of relying on it being
called through call_rcu(..., do_free_init), which used to allowed us call
do_free_init() asynchronously after the end of a subsequent grace period.
The move to a global workqueue broke the gaurantees for code which needed
to be sure the do_free_init() would complete with rcu_barrier(). To fix
this callers which used to rely on rcu_barrier() must now instead use
flush_work(&init_free_wq).
Without this fix, we still could encounter false positive reports in W+X
checking since the rcu_barrier() here can not ensure the ordering now.
Even worse, the rcu_barrier() can introduce significant delay. Eric
Chanudet reported that the rcu_barrier introduces ~0.1s delay on a
PREEMPT_RT kernel.
[ 0.291444] Freeing unused kernel memory: 5568K
[ 0.402442] Run /sbin/init as init process
With this fix, the above delay can be eliminated.
Link: https://lkml.kernel.org/r/20240227023546.2490667-1-changbin.du@huawei.com
Fixes: 1a7b7d9220 ("modules: Use vmalloc special flag")
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Xiaoyi Su <suxiaoyi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Memoryless nodes do not have any memory to migrate to, so, as an
optimization, stop trying it.
Link: https://lkml.kernel.org/r/20240219041920.1183-1-byungchul@sk.com
Link: https://lkml.kernel.org/r/20240216111502.79759-1-byungchul@sk.com
Fixes: c574bbe917 ("NUMA balancing: optimize page placement for memory tiering system")
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Benjamin Segall <bsegall@google.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The BPF struct_ops previously only allowed one page of trampolines.
Each function pointer of a struct_ops is implemented by a struct_ops
bpf program. Each struct_ops bpf program requires a trampoline.
The following selftest patch shows each page can hold a little more
than 20 trampolines.
While one page is more than enough for the tcp-cc usecase,
the sched_ext use case shows that one page is not always enough and hits
the one page limit. This patch overcomes the one page limit by allocating
another page when needed and it is limited to a total of
MAX_IMAGE_PAGES (8) pages which is more than enough for
reasonable usages.
The variable st_map->image has been changed to st_map->image_pages, and
its type has been changed to an array of pointers to pages.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Perform all validations when updating values of struct_ops maps. Doing
validation in st_ops->reg() and st_ops->update() is not necessary anymore.
However, tcp_register_congestion_control() has been called in various
places. It still needs to do validations.
Cc: netdev@vger.kernel.org
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This is a cleanup patch, making code a bit more concise.
1) Use skb_network_offset(skb) in place of
(skb_network_header(skb) - skb->data)
2) Use -skb_network_offset(skb) in place of
(skb->data - skb_network_header(skb))
3) Use skb_transport_offset(skb) in place of
(skb_transport_header(skb) - skb->data)
4) Use skb_inner_transport_offset(skb) in place of
(skb_inner_transport_header(skb) - skb->data)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZeEKVAAKCRDbK58LschI
g7oYAQD5Jlv4fIVTvxvfZrTTZ2tU+OsPa75mc8SDKwpash3YygEA8kvESy8+t6pg
D6QmSf1DIZdFoSp/bV+pfkNWMeR8gwg=
=mTAj
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The x86 architecture has an idle routine for AMD CPUs which are affected
by erratum 400. On the affected CPUs the local APIC timer stops in the
C1E halt state.
It therefore requires tick broadcasting. The invocation of
tick_broadcast_enter()/exit() from this function violates the RCU
constraints because it can end up in lockdep or tracing, which
rightfully triggers a warning.
tick_broadcast_enter()/exit() must be invoked before ct_cpuidle_enter()
and after ct_cpuidle_exit() in default_idle_call().
Add a static branch conditional invocation of tick_broadcast_enter()/exit()
into this function to allow X86 to replace the AMD specific idle code. It's
guarded by a config switch which will be selected by x86. Otherwise it's
a NOOP.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240229142248.266708822@linutronix.de
- fprobe: Fix to allocate entry_data_size buffer for each rethook
instance. This fixes a buffer overrun bug (which leads a kernel
crash) when fprobe user uses its entry_data in the entry_handler.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmXhIPgbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bhwIH/1h5q2ZqNwNplDGVQpWU
G1uuRHLlt47jwbGR3gfeYqVELtX0gFigBsmVouCKK3u3qerB1pDscYhULzKeHjS4
1HAsonj+vKY2pbdCaRnxRT7ejlEioN8CwPb1eqY6Bf6XQ2tJqS5gUqdej8JDJuY5
tpNAhHWqAnRvf1V5muclGAIU+9zavrAjbetpgrPEDIjE5idFvN+6D+4PXiM1cRIW
KXW1oA7VlShdfY7xprSZ33Lx7C/dLWojM2P/z/BvqyXOf4f1ovqtGFJegW4n7V5b
ZgamgOcSBwFLTVOTpOzn0peucduLFTfEWyC7fFGkHjBxTl2JypsQLEupdoaWLvBB
el4=
=bUgZ
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull fprobe fix from Masami Hiramatsu:
- allocate entry_data_size buffer for each rethook instance.
This fixes a buffer overrun bug (which leads a kernel crash)
when fprobe user uses its entry_data in the entry_handler.
* tag 'probes-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix to allocate entry_data_size buffer with rethook instances
Use try_cmpxchg() instead of cmpxchg(*ptr, old, new) == old.
The x86 CMPXCHG instruction returns success in the ZF flag, so this change
saves a compare after CMPXCHG (and related move instruction in front of CMPXCHG).
Also, try_cmpxchg() implicitly assigns old *ptr value to "old" when CMPXCHG
fails. There is no need to re-read the value in the loop.
Note that the value from *ptr should be read using READ_ONCE() to prevent
the compiler from merging, refetching or reordering the read.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240124104953.612063-1-ubizjak@gmail.com
Moving pidfds from the anonymous inode infrastructure to a separate tiny
in-kernel filesystem similar to sockfs, pipefs, and anon_inodefs causes
selinux denials and thus various userspace components that make heavy
use of pidfds to fail as pidfds used anon_inode_getfile() which aren't
subject to any LSM hooks. But dentry_open() is and that would cause
regressions.
The failures that are seen are selinux denials. But the core failure is
dbus-broker. That cascades into other services failing that depend on
dbus-broker. For example, when dbus-broker fails to start polkit and all
the others won't be able to work because they depend on dbus-broker.
The reason for dbus-broker failing is because it doesn't handle failures
for SO_PEERPIDFD correctly. Last kernel release we introduced
SO_PEERPIDFD (and SCM_PIDFD). SO_PEERPIDFD allows dbus-broker and polkit
and others to receive a pidfd for the peer of an AF_UNIX socket. This is
the first time in the history of Linux that we can safely authenticate
clients in a race-free manner.
dbus-broker immediately made use of this but messed up the error
checking. It only allowed EINVAL as a valid failure for SO_PEERPIDFD.
That's obviously problematic not just because of LSM denials but because
of seccomp denials that would prevent SO_PEERPIDFD from working; or any
other new error code from there.
So this is catching a flawed implementation in dbus-broker as well. It
has to fallback to the old pid-based authentication when SO_PEERPIDFD
doesn't work no matter the reasons otherwise it'll always risk such
failures. So overall that LSM denial should not have caused dbus-broker
to fail. It can never assume that a feature released one kernel ago like
SO_PEERPIDFD can be assumed to be available.
So, the next fix separate from the selinux policy update is to try and
fix dbus-broker at [3]. That should make it into Fedora as well. In
addition the selinux reference policy should also be updated. See [4]
for that. If Selinux is in enforcing mode in userspace and it encounters
anything that it doesn't know about it will deny it by default. And the
policy is entirely in userspace including declaring new types for stuff
like nsfs or pidfs to allow it.
For now we continue to raise S_PRIVATE on the inode if it's a pidfs
inode which means things behave exactly like before.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2265630
Link: https://github.com/fedora-selinux/selinux-policy/pull/2050
Link: https://github.com/bus1/dbus-broker/pull/343 [3]
Link: https://github.com/SELinuxProject/refpolicy/pull/762 [4]
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240222190334.GA412503@dev-arch.thelio-3990X
Link: https://lore.kernel.org/r/20240218-neufahrzeuge-brauhaus-fb0eb6459771@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
This moves pidfds from the anonymous inode infrastructure to a tiny
pseudo filesystem. This has been on my todo for quite a while as it will
unblock further work that we weren't able to do simply because of the
very justified limitations of anonymous inodes. Moving pidfds to a tiny
pseudo filesystem allows:
* statx() on pidfds becomes useful for the first time.
* pidfds can be compared simply via statx() and then comparing inode
numbers.
* pidfds have unique inode numbers for the system lifetime.
* struct pid is now stashed in inode->i_private instead of
file->private_data. This means it is now possible to introduce
concepts that operate on a process once all file descriptors have been
closed. A concrete example is kill-on-last-close.
* file->private_data is freed up for per-file options for pidfds.
* Each struct pid will refer to a different inode but the same struct
pid will refer to the same inode if it's opened multiple times. In
contrast to now where each struct pid refers to the same inode. Even
if we were to move to anon_inode_create_getfile() which creates new
inodes we'd still be associating the same struct pid with multiple
different inodes.
The tiny pseudo filesystem is not visible anywhere in userspace exactly
like e.g., pipefs and sockfs. There's no lookup, there's no complex
inode operations, nothing. Dentries and inodes are always deleted when
the last pidfd is closed.
We allocate a new inode for each struct pid and we reuse that inode for
all pidfds. We use iget_locked() to find that inode again based on the
inode number which isn't recycled. We allocate a new dentry for each
pidfd that uses the same inode. That is similar to anonymous inodes
which reuse the same inode for thousands of dentries. For pidfds we're
talking way less than that. There usually won't be a lot of concurrent
openers of the same struct pid. They can probably often be counted on
two hands. I know that systemd does use separate pidfd for the same
struct pid for various complex process tracking issues. So I think with
that things actually become way simpler. Especially because we don't
have to care about lookup. Dentries and inodes continue to be always
deleted.
The code is entirely optional and fairly small. If it's not selected we
fallback to anonymous inodes. Heavily inspired by nsfs which uses a
similar stashing mechanism just for namespaces.
Link: https://lore.kernel.org/r/20240213-vfs-pidfd_fs-v1-2-f863f58cfce1@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
Boqun pointed out that workqueues aren't handling BH work items on offlined
CPUs. Unlike tasklet which transfers out the pending tasks from
CPUHP_SOFTIRQ_DEAD, BH workqueue would just leave them pending which is
problematic. Note that this behavior is specific to BH workqueues as the
non-BH per-CPU workers just become unbound when the CPU goes offline.
This patch fixes the issue by draining the pending BH work items from an
offlined CPU from CPUHP_SOFTIRQ_DEAD. Because work items carry more context,
it's not as easy to transfer the pending work items from one pool to
another. Instead, run BH work items which execute the offlined pools on an
online CPU.
Note that this assumes that no further BH work items will be queued on the
offlined CPUs. This assumption is shared with tasklet and should be fine for
conversions. However, this issue also exists for per-CPU workqueues which
will just keep executing work items queued after CPU offline on unbound
workers and workqueue should reject per-CPU and BH work items queued on
offline CPUs. This will be addressed separately later.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: http://lkml.kernel.org/r/Zdvw0HdSXcU3JZ4g@boqun-archlinux
The update_cpumask(), checks for newly requested cpumask by calling
validate_change(), which returns an error on passing an invalid set
of cpu(s). Independent of the error returned, update_cpumask() always
returns zero, suppressing the error and returning success to the user
on writing an invalid cpu range for a cpuset. Fix it by returning
retval instead, which is returned by validate_change().
Fixes: 99fe36ba6f ("cgroup/cpuset: Improve temporary cpumasks handling")
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
We've removed the SLAB allocator, cpuset_do_slab_mem_spread() and
SLAB_MEM_SPREAD, memory_spread_slab is a no-op now. We can mark
memory_spread_slab as obsolete in case someone still wants to use it after
cpuset_do_slab_mem_spread() removed. For more details, please check [1].
[1] https://lore.kernel.org/lkml/32bc1403-49da-445a-8c00-9686a3b0d6a3@redhat.com/T/#m8e292e21b00f95a4bb8086371fa7387fa4ea8f60
tj: Description and cosmetic updates.
Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
psci_init_system_suspend() invokes suspend_set_ops() very early during
bootup even before kernel command line for mem_sleep_default is setup.
This leads to kernel command line mem_sleep_default=s2idle not working
as mem_sleep_current gets changed to deep via suspend_set_ops() and never
changes back to s2idle.
Set mem_sleep_current along with mem_sleep_default during kernel command
line setup as default suspend mode.
Fixes: faf7ec4a92 ("drivers: firmware: psci: add system suspend support")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In configurations with CONFIG_TICK_ONESHOT but no CONFIG_NO_HZ or
CONFIG_HIGH_RES_TIMERS, tick_sched_timer_dying() is stubbed out,
but still defined as a global function as well:
kernel/time/tick-sched.c:1599:6: error: redefinition of 'tick_sched_timer_dying'
1599 | void tick_sched_timer_dying(int cpu)
| ^
kernel/time/tick-sched.h:111:20: note: previous definition is here
111 | static inline void tick_sched_timer_dying(int cpu) { }
| ^
This configuration only appears with ARM CONFIG_ARCH_BCM_MOBILE,
which should not actually select CONFIG_TICK_ONESHOT.
Adjust the #ifdef for the stub to match the condition for building the
tick-sched.c file for consistency with the definition and to avoid
the build regression.
Fixes: 3aedb7fcd8 ("tick/sched: Remove useless oneshot ifdeffery")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240228123850.3499024-1-arnd@kernel.org
Fix a possible memory leak in update_exclusive_cpumask() by moving the
alloc_cpumasks() down after the validate_change() check which can fail
and still before the temporary cpumasks are needed.
Fixes: e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
Reported-and-tested-by: Mirsad Todorovac <mirsad.todorovac@alu.hr>
Closes: https://lore.kernel.org/lkml/14915689-27a3-4cd8-80d2-9c30d0c768b6@alu.unizg.hr
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v6.7+
Move the pidfd file operations over to their own file in preparation of
implementing pidfs and to isolate them from other mostly unrelated
functionality in other files.
Link: https://lore.kernel.org/r/20240213-vfs-pidfd_fs-v1-1-f863f58cfce1@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
SD_SHARE_PKG_RESOURCES is a bit of a misnomer: its naming suggests that
it's sharing all 'package resources' - while in reality it's specifically
for sharing the LLC only.
Rename it to SD_SHARE_LLC to reduce confusion.
[ mingo: Rewrote the confusing changelog as well. ]
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20240210113924.1130448-5-alexs@kernel.org
sched_use_asym_prio() checks whether CPU priorities should be used. It
makes sense to check for the SD_ASYM_PACKING() inside the function.
Since both sched_asym() and sched_group_asym() use sched_use_asym_prio(),
remove the now superfluous checks for the flag in various places.
Signed-off-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240210113924.1130448-4-alexs@kernel.org
sched_use_asym_prio() and sched_asym_prefer() are used together in various
places. Consolidate them into a single function sched_asym().
The existing sched_asym() function is only used when collecting statistics
of a scheduling group. Rename it as sched_group_asym(), and remove the
obsolete function description.
This makes the code easier to read. No functional changes.
Signed-off-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240210113924.1130448-3-alexs@kernel.org
The 'sds' argument is not used in the sched_asym() function anymore, remove it.
Fixes: c9ca07886a ("sched/fair: Do not even the number of busy CPUs via asym_packing")
Signed-off-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240210113924.1130448-2-alexs@kernel.org
These flags are already documented in include/linux/sched/sd_flags.h.
Also, add missing SD_CLUSTER and keep the comment on SD_ASYM_PACKING
as it is a special case.
Suggested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240210113924.1130448-1-alexs@kernel.org
When comparing the current struct sched_group with the yet-busiest
domain in update_sd_pick_busiest(), if the two groups have the same
group type, we're currently doing a bit of unnecessary work for any
group >= group_misfit_task. We're comparing the two groups, and then
returning only if false (the group in question is not the busiest).
Otherwise, we break out, do an extra unnecessary conditional check that's
vacuously false for any group type > group_fully_busy, and then always
return true.
Let's just return directly in the switch statement instead. This doesn't
change the size of vmlinux with llvm 17 (not surprising given that all
of this is inlined in load_balance()), but it does shrink load_balance()
by 88 bytes on x86. Given that it also improves readability, this seems
worth doing.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20240206043921.850302-4-void@manifault.com
In update_sd_pick_busiest(), when comparing two sched groups that are
both of type group_misfit_task, we currently consider the new group as
busier than the current busiest group even if the new group has the
same misfit task load as the current busiest group. We can avoid some
unnecessary writes if we instead only consider the newest group to be
the busiest if it has a higher load than the current busiest. This
matches the behavior of other group types where we compare load, such as
two groups that are both overloaded.
Let's update the group_misfit_task type comparison to also only update
the busiest group in the event of strict inequality.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20240206043921.850302-3-void@manifault.com
In update_sd_lb_stats(), when we're iterating over the sched groups that
comprise a sched domain, we're skipping the call to
update_sd_pick_busiest() for the sched group that contains the local /
destination CPU. We use a goto to skip the call, but we could just as
easily check !local_group, as there's no other logic that we need to
skip with the goto. Let's remove the goto, and check for !local_group in
the if statement instead.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20240206043921.850302-2-void@manifault.com
When picking a CPU on task wakeup, select_idle_core() has to take
into account the scheduling domain where the function looks for the CPU.
This is because the "isolcpus" kernel command line option can remove CPUs
from the domain to isolate them from other SMT siblings.
This change replaces the set of CPUs allowed to run the task from
p->cpus_ptr by the intersection of p->cpus_ptr and sched_domain_span(sd)
which is stored in the 'cpus' argument provided by select_idle_cpu().
Fixes: 9fe1f127b9 ("sched/fair: Merge select_idle_core/cpu()")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240110131707.437301-2-keisuke.nishimura@inria.fr
When picking a CPU on task wakeup, select_idle_smt() has to take
into account the scheduling domain of @target. This is because the
"isolcpus" kernel command line option can remove CPUs from the domain to
isolate them from other SMT siblings.
This fix checks if the candidate CPU is in the target scheduling domain.
Commit:
df3cb4ea1f ("sched/fair: Fix wrong cpu selecting from isolated domain")
... originally introduced this fix by adding the check of the scheduling
domain in the loop.
However, commit:
3e6efe87cd ("sched/fair: Remove redundant check in select_idle_smt()")
... accidentally removed the check. Bring it back.
Fixes: 3e6efe87cd ("sched/fair: Remove redundant check in select_idle_smt()")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240110131707.437301-1-keisuke.nishimura@inria.fr
Use existing helper function cpu_util_irq() instead of open-coding
access to ->avg_irq.
During review it was noted that ->avg_irq could be updated by a
different CPU than the one which is trying to access it.
->avg_irq is updated with WRITE_ONCE(), use READ_ONCE to access it
in order to avoid any compiler optimizations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240101154624.100981-3-sshegde@linux.vnet.ibm.com
There are helper functions called cpu_util_dl() and cpu_util_rt() which give
the average utilization of DL and RT respectively. But there are a few
places in code where access to these variables is open-coded.
Instead use the helper function so that code becomes simpler and easier to
maintain later on.
No functional changes intended.
Signed-off-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240101154624.100981-2-sshegde@linux.vnet.ibm.com
On TDX it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
DMA could free decrypted/shared pages if dma_set_decrypted() fails. This
should be a rare case. Just leak the pages in this case instead of
freeing them.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Introduce a new debugfs interface io_tlb_transient_nslabs. The device
driver can create a new swiotlb transient memory pool once default
memory pool is full. To export the swiotlb transient memory pool usage
via debugfs would help the user estimate the size of transient swiotlb
memory pool or analyze device driver memory leak issue.
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We mistakenly always fire lock contention tracepoints in the writer path,
while it should be conditional on the trylock result.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20231108215322.2845536-1-namhyung@kernel.org
Clarify in the comments that the RWSEM_READER_OWNED bit in the owner
field is just a hint, not an authoritative state of the rwsem.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240222150540.79981-4-longman@redhat.com
When CONFIG_LOCK_EVENT_COUNTS is off, the wait_early variable will be
set but not used. This is expected. Recent compilers will not generate
wait_early code in this case.
Add the __maybe_unused attribute to wait_early for suppressing this
W=1 warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240222150540.79981-2-longman@redhat.com
Closes: https://lore.kernel.org/oe-kbuild-all/202312260422.f4pK3f9m-lkp@intel.com/
'days' is a s64 (from div_s64), and so should use a %lld specifier.
This was found by extending KUnit's assertion macros to use gcc's
__printf attribute.
Fixes: 2760105516 ("time: Improve performance of time64_to_tm()")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bringup_nonboot_cpus() gets passed the 'setup_max_cpus'
variable in init/main.c - which is also the name of the parameter,
shadowing the name.
To reduce confusion and to allow the 'setup_max_cpus' value
to be #defined in the <linux/smp.h> header, use the 'max_cpus'
name for the function parameter name.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
The next timer (re-)evaluation, with the purpose of entering/updating
the dyntick mode, can happen from 3 sites and none of them are relevant
while the CPU is offline:
1) The idle loop:
a) From the quick check helping the cpuidle governor to heuristically
predict the best C-state.
b) While stopping the tick.
But if the CPU is offline, the tick has been cancelled and there is
consequently no need to further stop the tick.
2) Remote expiry: when a CPU remotely expires global timers on behalf of
another CPU, the latter target's next timer is re-evaluated
afterwards. However remote expîry doesn't happen on offline CPUs.
3) IRQ exit: on nohz_full mode, the tick is (re-)evaluated on IRQ exit.
But full dynticks is disabled on offline CPUs.
Therefore it is safe to assume that no next dyntick timer lookup can
be performed on offline CPUs.
Assert this expectation to report any surprise.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-17-frederic@kernel.org
The timekeeping duty is handed over from the outgoing CPU on stop
machine, then the oneshot tick is stopped right after. Therefore it's
guaranteed that the current CPU isn't the timekeeper upon its last call
to idle.
Besides, calling tick_nohz_idle_stop_tick() while the dying CPU goes
into idle suggests that the tick is going to be stopped while it is
actually stopped already from the appropriate CPU hotplug state.
Remove the confusing call and the obsolete case handling and convert it
to a sanity check that verifies the above assumption.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-16-frederic@kernel.org
The timekeeping duty is handed over from the outgoing CPU within stop
machine. This works well if CONFIG_NO_HZ_COMMON=n or the tick is in
high-res mode. However in low-res dynticks mode, the tick isn't
cancelled until the clockevent is shut down, which can happen later. The
tick may therefore fire again once IRQs are re-enabled on stop machine
and until IRQs are disabled for good upon the last call to idle.
That's so many opportunities for a timekeeper to go idle and the
outgoing CPU to take over that duty. This is why
tick_nohz_idle_stop_tick() is called one last time on idle if the CPU
is seen offline: so that the timekeeping duty is handed over again in
case the CPU has re-taken the duty.
This means there are two timekeeping handovers on CPU down hotplug with
different undocumented constraints and purposes:
1) A handover on stop machine for !dynticks || highres. All online CPUs
are guaranteed to be non-idle and the timekeeping duty can be safely
handed-over. The hrtimer tick is cancelled so it is guaranteed that in
dynticks mode the outgoing CPU won't take again the duty.
2) A handover on last idle call for dynticks && lowres. Setting the
duty to TICK_DO_TIMER_NONE makes sure that a CPU will take over the
timekeeping.
Prepare for consolidating the handover to a single place (the first one)
with shutting down the low-res tick as well from
tick_cancel_sched_timer() as well. This will simplify the handover and
unify the tick cancellation between high-res and low-res.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-15-frederic@kernel.org
The nohz mode field tells about low resolution nohz mode or high
resolution nohz mode but it doesn't tell about high resolution non-nohz
mode.
In order to retrieve the latter state, tick_cancel_sched_timer() must
fiddle with struct hrtimer's internals to guess if the tick has been
initialized in high resolution.
Move instead the nohz mode field information into the tick flags and
provide two new bits: one to know if the tick is in nohz mode and
another one to know if the tick is in high resolution. The combination
of those two flags provides all the needed informations to determine
which of the three tick modes is running.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-14-frederic@kernel.org
The individual bitfields of struct tick_sched must be modified from
IRQs disabled places, otherwise local modifications can race due to them
sharing the same memory storage.
The recent move of the "got_idle_tick" bitfield to its own storage shows
that the use of these bitfields, as pretty as they look, can be as much
error prone.
In order to avoid future issues of the like and make sure that those
bitfields are safely accessed, move those flags to an explicit mask
along with a mutator function performing the basic IRQs disabled sanity
check.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-13-frederic@kernel.org
tick_nohz_idle_got_tick() is called by cpuidle_reflect() within the idle
loop with interrupts enabled. This function modifies the struct
tick_sched's bitfield "got_idle_tick". However this bitfield is stored
within the same mask as other bitfields that can be modified from
interrupts.
Fortunately so far it looks like the only race that can happen is while
writing ->got_idle_tick to 0, an interrupt fires and writes the
->idle_active field to 0. It's then possible that the interrupted write
to ->got_idle_tick writes back the old value of ->idle_active back to 1.
However if that happens, the worst possible outcome is that the time
spent between that interrupt and the upcoming call to
tick_nohz_idle_exit() is accounted as idle, which is negligible quantity.
Still all the bitfield writes within this struct tick_sched's shadow
mask should be IRQ-safe. Therefore move this bitfield out to its own
storage to avoid further suprises.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-12-frederic@kernel.org
The full-nohz update function checks if the nohz mode is active before
proceeding. It considers one exception though: if the tick is already
stopped even though the nohz mode is inactive, it still moves on in
order to update/restart the tick if needed.
However in order for the tick to be stopped, the nohz_mode has to be
either NOHZ_MODE_LOWRES or NOHZ_MODE_HIGHRES. Therefore it doesn't make
sense to test if the tick is stopped before verifying NOHZ_MODE_INACTIVE
mode.
Remove the needless related condition.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-11-frederic@kernel.org
The broadcast shutdown code is executed through a random explicit call
within stop machine from the outgoing CPU.
However the tick broadcast is a midware between the tick callback and
the clocksource, therefore it makes more sense to shut it down after the
tick callback and before the clocksource drivers.
Move it instead to the common tick shutdown CPU hotplug state where
related operations can be ordered from highest to lowest level.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-10-frederic@kernel.org
The tick hrtimer is cancelled right before hrtimers are migrated. This
is done from the hrtimer subsystem even though it shouldn't know about
its actual users.
Move instead the tick hrtimer cancellation to the relevant CPU hotplug
state that aims at centralizing high level tick shutdown operations so
that the related flow is easy to follow.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-9-frederic@kernel.org
During the CPU offlining process, the various timer tick features are
shut down from scattered places, sometimes from teardown callbacks on
stop machine, sometimes through explicit calls, sometimes from the
control CPU after the CPU died. The reason why these shutdown operations
are spread around is not always clear and it makes the tick lifecycle
hard to follow.
The tick should be shut down in order from highest to lowest level:
On stop machine from the dying CPU (high-level):
1) Hand-over the timekeeping duty (tick_handover_do_timer())
2) Cancel the tick implementation called by the clockevent callback
(tick_cancel_sched_timer())
3) Shutdown broadcasting (tick_offline_cpu() / tick_broadcast_offline())
On stop machine from the dying CPU (low-level):
4) Shutdown clockevents drivers (CPUHP_AP_*_TIMER_STARTING states)
From the control CPU after the CPU died (low-level):
5) Shutdown/unregister/cleanup clockevents for the dead CPU
(tick_cleanup_dead_cpu())
Instead the current order is 2, 4 (both from CPU hotplug states), then
1 and 3 through direct calls. This layout and order don't make much
sense. The operations 1, 2, 3 should be gathered together and in order.
Sort this situation with creating a new TICK shut-down CPU hotplug state
and start with introducing the timekeeping duty hand-over there. The
state must precede hrtimers migration because the tick hrtimer will be
stopped from it in a further patch.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-8-frederic@kernel.org
The tick sched structure is already cleared from tick_cancel_sched_timer(),
so there is no need to clear that field again.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-7-frederic@kernel.org
tick_nohz_stop_sched_tick() is only about NOHZ_full and not about
dynticks-idle. Reflect that in the function name to avoid confusion.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-6-frederic@kernel.org
Avoid ifdeferry if it can be converted to IS_ENABLED() whenever possible
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-5-frederic@kernel.org
tick-sched.c is only built when CONFIG_TICK_ONESHOT=y, which is selected
only if CONFIG_NO_HZ_COMMON=y or CONFIG_HIGH_RES_TIMERS=y. Therefore
the related ifdeferry in this file is needless and can be removed.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-4-frederic@kernel.org
tick_nohz_lowres_handler() does the same work as
tick_nohz_highres_handler() plus the clockevent device reprogramming, so
make the former reuse the latter and rename it accordingly.
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-3-frederic@kernel.org
The ts->sched_timer initialization work of tick_nohz_switch_to_nohz()
is almost the same as that of tick_setup_sched_timer(), so adjust the
latter to get it reused by tick_nohz_switch_to_nohz().
This also makes the low resolution mode sched_timer benefit from the tick
skew boot option.
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240225225508.11587-2-frederic@kernel.org
The current code will scan the entirety of each per-CPU list of exiting
tasks in ->rtp_exit_list with interrupts disabled. This is normally just
fine, because each CPU typically won't have very many tasks in this state.
However, if a large number of tasks block late in do_exit(), these lists
could be arbitrarily long. Low probability, perhaps, but it really
could happen.
This commit therefore occasionally re-enables interrupts while traversing
these lists, inserting a dummy element to hold the current place in the
list. In kernels built with CONFIG_PREEMPT_RT=y, this re-enabling happens
after each list element is processed, otherwise every one-to-two jiffies.
[ paulmck: Apply Frederic Weisbecker feedback. ]
Link: https://lore.kernel.org/all/ZdeI_-RfdLR8jlsm@localhost.localdomain/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Holding a mutex across synchronize_rcu_tasks() and acquiring
that same mutex in code called from do_exit() after its call to
exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop()
results in deadlock. This is by design, because tasks that are far
enough into do_exit() are no longer present on the tasks list, making
it a bit difficult for RCU Tasks to find them, let alone wait on them
to do a voluntary context switch. However, such deadlocks are becoming
more frequent. In addition, lockdep currently does not detect such
deadlocks and they can be difficult to reproduce.
In addition, if a task voluntarily context switches during that time
(for example, if it blocks acquiring a mutex), then this task is in an
RCU Tasks quiescent state. And with some adjustments, RCU Tasks could
just as well take advantage of that fact.
This commit therefore eliminates these deadlock by replacing the
SRCU-based wait for do_exit() completion with per-CPU lists of tasks
currently exiting. A given task will be on one of these per-CPU lists for
the same period of time that this task would previously have been in the
previous SRCU read-side critical section. These lists enable RCU Tasks
to find the tasks that have already been removed from the tasks list,
but that must nevertheless be waited upon.
The RCU Tasks grace period gathers any of these do_exit() tasks that it
must wait on, and adds them to the list of holdouts. Per-CPU locking
and get_task_struct() are used to synchronize addition to and removal
from these lists.
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit continues the elimination of deadlocks involving do_exit()
and RCU tasks by causing exit_tasks_rcu_start() to add the current
task to a per-CPU list and causing exit_tasks_rcu_stop() to remove the
current task from whatever list it is on. These lists will be used to
track tasks that are exiting, while still accounting for any RCU-tasks
quiescent states that these tasks pass though.
[ paulmck: Apply Frederic Weisbecker feedback. ]
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Holding a mutex across synchronize_rcu_tasks() and acquiring
that same mutex in code called from do_exit() after its call to
exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop()
results in deadlock. This is by design, because tasks that are far
enough into do_exit() are no longer present on the tasks list, making
it a bit difficult for RCU Tasks to find them, let alone wait on them
to do a voluntary context switch. However, such deadlocks are becoming
more frequent. In addition, lockdep currently does not detect such
deadlocks and they can be difficult to reproduce.
In addition, if a task voluntarily context switches during that time
(for example, if it blocks acquiring a mutex), then this task is in an
RCU Tasks quiescent state. And with some adjustments, RCU Tasks could
just as well take advantage of that fact.
This commit therefore initializes the data structures that will be needed
to rely on these quiescent states and to eliminate these deadlocks.
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
In order for RCU Tasks to reliably maintain per-CPU lists of exiting
tasks, those lists must be initialized before it is possible for tasks
to exit, especially given that the boot CPU is not necessarily CPU 0
(an example being, powerpc kexec() kernels). And at the time that
rcu_init_tasks_generic() is called, a task could potentially exit,
unconventional though that sort of thing might be.
This commit therefore moves the calls to cblist_init_generic() from
functions called from rcu_init_tasks_generic() to a new function named
tasks_cblist_init_generic() that is invoked from rcu_init().
This constituted a bug in a commit that never went to mainline, so
there is no need for any backporting to -stable.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Holding a mutex across synchronize_rcu_tasks() and acquiring
that same mutex in code called from do_exit() after its call to
exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop()
results in deadlock. This is by design, because tasks that are far
enough into do_exit() are no longer present on the tasks list, making
it a bit difficult for RCU Tasks to find them, let alone wait on them
to do a voluntary context switch. However, such deadlocks are becoming
more frequent. In addition, lockdep currently does not detect such
deadlocks and they can be difficult to reproduce.
In addition, if a task voluntarily context switches during that time
(for example, if it blocks acquiring a mutex), then this task is in an
RCU Tasks quiescent state. And with some adjustments, RCU Tasks could
just as well take advantage of that fact.
This commit therefore adds the data structures that will be needed
to rely on these quiescent states and to eliminate these deadlocks.
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
The new helper function is needed to help blk-mq check if it needs to
dispatch the softirq on another CPU to match the performance level the
IO requester is running at. This is important on HMP systems where not
all CPUs have the same compute capacity.
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240223155749.2958009-2-qyousef@layalina.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now crash codes under kernel/ folder has been split out from kexec
code, crash dumping can be separated from kexec reboot in config
items on arm64 with some adjustments.
Here wrap up crash dumping codes with CONFIG_CRASH_DUMP ifdeffery.
[bhe@redhat.com: fix building error in generic codes]
Link: https://lkml.kernel.org/r/20240129135033.157195-2-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240124051254.67105-8-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By splitting CRASH_RESERVE and VMCORE_INFO out from CRASH_CORE, cleaning
up the dependency of FA_DMUMP on CRASH_DUMP, and moving crash codes from
kexec_core.c to crash_core.c, now we can rearrange CRASH_DUMP to
depend on KEXEC_CORE, and make CRASH_DUMP select CRASH_RESERVE and
VMCORE_INFO.
KEXEC_CORE won't select CRASH_RESERVE and VMCORE_INFO any more because
KEXEC_CORE enables codes which allocate control pages, copy
kexec/kdump segments, and prepare for switching. These codes are shared
by both kexec reboot and crash dumping.
Doing this makes codes and the corresponding config items more
logical (the right item depends on or is selected by the left item).
PROC_KCORE -----------> VMCORE_INFO
|----------> VMCORE_INFO
FA_DUMP----|
|----------> CRASH_RESERVE
---->VMCORE_INFO
/
|---->CRASH_RESERVE
KEXEC --| /|
|--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE
KEXEC_FILE --| \ |
\---->CRASH_HOTPLUG
KEXEC --|
|--> KEXEC_CORE--> kexec reboot
KEXEC_FILE --|
Link: https://lkml.kernel.org/r/20240124051254.67105-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, KEXEC_CORE select CRASH_CORE automatically because crash codes
need be built in to avoid compiling error when building kexec code even
though the crash dumping functionality is not enabled. E.g
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
---------------------
After splitting out crashkernel reservation code and vmcoreinfo exporting
code, there's only crash related code left in kernel/crash_core.c. Now
move crash related codes from kexec_core.c to crash_core.c and only build it
in when CONFIG_CRASH_DUMP=y.
And also wrap up crash codes inside CONFIG_CRASH_DUMP ifdeffery scope,
or replace inappropriate CONFIG_KEXEC_CORE ifdef with CONFIG_CRASH_DUMP
ifdef in generic kernel files.
With these changes, crash_core codes are abstracted from kexec codes and
can be disabled at all if only kexec reboot feature is wanted.
Link: https://lkml.kernel.org/r/20240124051254.67105-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In kdump kernel, /proc/vmcore is an elf file mapping the crashed kernel's
old memory content. Its elf header is constructed in 1st kernel and passed
to kdump kernel via elfcorehdr_addr. Config CRASH_DUMP enables the code
of 1st kernel's old memory accessing in different architectures.
Currently, config FA_DUMP has dependency on CRASH_DUMP because fadump
needs access global variable 'elfcorehdr_addr' to judge if it's in
kdump kernel within function is_kdump_kernel(). In the current
kernel/crash_dump.c, variable 'elfcorehdr_addr' is defined, and function
setup_elfcorehdr() used to parse kernel parameter to fetch the passed
value of elfcorehdr_addr. Only for accessing elfcorehdr_addr, FA_DUMP
really doesn't have to depends on CRASH_DUMP.
To remove the dependency of FA_DUMP on CRASH_DUMP to avoid confusion,
rename kernel/crash_dump.c to kernel/elfcorehdr.c, and build it when
CONFIG_VMCORE_INFO is ebabled. With this, FA_DUMP doesn't need to depend
on CRASH_DUMP.
[bhe@redhat.com: power/fadump: make FA_DUMP select CRASH_DUMP]
Link: https://lkml.kernel.org/r/Zb8D1ASrgX0qVm9z@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20240124051254.67105-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.
And add config item CRASH_RESERVE to control its enabling.
And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.
And also do renaming as follows:
- arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.
And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.
[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Split crash out from kexec and clean up related config
items", v3.
Motivation:
=============
Previously, LKP reported a building error. When investigating, it can't
be resolved reasonablly with the present messy kdump config items.
https://lore.kernel.org/oe-kbuild-all/202312182200.Ka7MzifQ-lkp@intel.com/
The kdump (crash dumping) related config items could causes confusions:
Firstly,
CRASH_CORE enables codes including
- crashkernel reservation;
- elfcorehdr updating;
- vmcoreinfo exporting;
- crash hotplug handling;
Now fadump of powerpc, kcore dynamic debugging and kdump all selects
CRASH_CORE, while fadump
- fadump needs crashkernel parsing, vmcoreinfo exporting, and accessing
global variable 'elfcorehdr_addr';
- kcore only needs vmcoreinfo exporting;
- kdump needs all of the current kernel/crash_core.c.
So only enabling PROC_CORE or FA_DUMP will enable CRASH_CORE, this
mislead people that we enable crash dumping, actual it's not.
Secondly,
It's not reasonable to allow KEXEC_CORE select CRASH_CORE.
Because KEXEC_CORE enables codes which allocate control pages, copy
kexec/kdump segments, and prepare for switching. These codes are
shared by both kexec reboot and kdump. We could want kexec reboot,
but disable kdump. In that case, CRASH_CORE should not be selected.
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
---------------------
Thirdly,
It's not reasonable to allow CRASH_DUMP select KEXEC_CORE.
That could make KEXEC_CORE, CRASH_DUMP are enabled independently from
KEXEC or KEXEC_FILE. However, w/o KEXEC or KEXEC_FILE, the KEXEC_CORE
code built in doesn't make any sense because no kernel loading or
switching will happen to utilize the KEXEC_CORE code.
---------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
---------------------
In this case, what is worse, on arch sh and arm, KEXEC relies on MMU,
while CRASH_DUMP can still be enabled when !MMU, then compiling error is
seen as the lkp test robot reported in above link.
------arch/sh/Kconfig------
config ARCH_SUPPORTS_KEXEC
def_bool MMU
config ARCH_SUPPORTS_CRASH_DUMP
def_bool BROKEN_ON_SMP
---------------------------
Changes:
===========
1, split out crash_reserve.c from crash_core.c;
2, split out vmcore_infoc. from crash_core.c;
3, move crash related codes in kexec_core.c into crash_core.c;
4, remove dependency of FA_DUMP on CRASH_DUMP;
5, clean up kdump related config items;
6, wrap up crash codes in crash related ifdefs on all 8 arch-es
which support crash dumping, except of ppc;
Achievement:
===========
With above changes, I can rearrange the config item logic as below (the right
item depends on or is selected by the left item):
PROC_KCORE -----------> VMCORE_INFO
|----------> VMCORE_INFO
FA_DUMP----|
|----------> CRASH_RESERVE
---->VMCORE_INFO
/
|---->CRASH_RESERVE
KEXEC --| /|
|--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE
KEXEC_FILE --| \ |
\---->CRASH_HOTPLUG
KEXEC --|
|--> KEXEC_CORE (for kexec reboot only)
KEXEC_FILE --|
Test
========
On all 8 architectures, including x86_64, arm64, s390x, sh, arm, mips,
riscv, loongarch, I did below three cases of config item setting and
building all passed. Take configs on x86_64 as exampmle here:
(1) Both CONFIG_KEXEC and KEXEC_FILE is unset, then all kexec/kdump
items are unset automatically:
# Kexec and crash features
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# end of Kexec and crash features
(2) set CONFIG_KEXEC_FILE and 'make olddefconfig':
---------------
# Kexec and crash features
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192
# end of Kexec and crash features
---------------
(3) unset CONFIG_CRASH_DUMP in case 2 and execute 'make olddefconfig':
------------------------
# Kexec and crash features
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
# end of Kexec and crash features
------------------------
Note:
For ppc, it needs investigation to make clear how to split out crash
code in arch folder. Hope Hari and Pingfan can help have a look, see if
it's doable. Now, I make it either have both kexec and crash enabled, or
disable both of them altogether.
This patch (of 14):
Both kdump and fa_dump of ppc rely on crashkernel reservation. Move the
relevant codes into separate files: crash_reserve.c,
include/linux/crash_reserve.h.
And also add config item CRASH_RESERVE to control its enabling of the
codes. And update config items which has relationship with crashkernel
reservation.
And also change ifdeffery from CONFIG_CRASH_CORE to CONFIG_CRASH_RESERVE
when those scopes are only crashkernel reservation related.
And also rename arch/XXX/include/asm/{crash_core.h => crash_reserve.h} on
arm64, x86 and risc-v because those architectures' crash_core.h is only
related to crashkernel reservation.
[akpm@linux-foundation.org: s/CRASH_RESEERVE/CRASH_RESERVE/, per Klara Modin]
Link: https://lkml.kernel.org/r/20240124051254.67105-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240124051254.67105-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Earlier, vmap_area_list is exported to vmcoreinfo so that makedumpfile get
the base address of vmalloc area. Now, vmap_area_list is empty, so export
VMALLOC_START to vmcoreinfo instead, and remove vmap_area_list.
[urezki@gmail.com: fix a warning in the crash_save_vmcoreinfo_init()]
Link: https://lkml.kernel.org/r/20240111192329.449189-1-urezki@gmail.com
Link: https://lkml.kernel.org/r/20240102184633.748113-6-urezki@gmail.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Kazuhito Hagio <k-hagio-ab@nec.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 0a31bd5f2b ("KMEM_CACHE(): simplify slab cache creation")
introduces a new macro. Use the new KMEM_CACHE() macro instead of
direct kmem_cache_create() to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
[PM: alignment fixes in both code and description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
A future user of the matrix allocator, does not know the size of the matrix
bitmaps at compile time.
To avoid wasting memory on unnecessary large bitmaps, size the bitmap at
matrix allocation time.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222094006.1030709-11-apatel@ventanamicro.com
Currently we have a special case for BPF_FUNC_timer_set_callback,
let's introduce a helper we can extend for the kfunc that will come in
a later patch
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240221-hid-bpf-sleepable-v3-3-1fb378ca6301@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
These 2 maps types are required for HID-BPF when a user wants to do
IO with a device from a sleepable tracing point.
Allowing BPF_MAP_TYPE_QUEUE (and therefore BPF_MAP_TYPE_STACK) allows
for a BPF program to prepare from an IRQ the list of HID commands to send
back to the device and then these commands can be retrieved from the
sleepable trace point.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240221-hid-bpf-sleepable-v3-1-1fb378ca6301@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For debugging kernel panics and other bugs, there is already an option of
panic_print to dump all tasks' call stacks. On today's large servers
running many containers, there could be thousands of tasks or more, and
this will print out huge amount of call stacks, taking a lot of time (for
serial console which is main target user case of panic_print).
And in many cases, only those several tasks being blocked are key for the
panic, so add an option to only dump blocked tasks' call stacks.
[akpm@linux-foundation.org: clarify documentation a little]
Link: https://lkml.kernel.org/r/20240202132042.3609657-1-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Turn send_sig_info(SIGSTOP) into send_signal_locked(SIGSTOP) and move it
from ptrace_attach() to ptrace_set_stopped().
This looks more logical and avoids lock(siglock) right after unlock().
Link: https://lkml.kernel.org/r/20240122171631.GA29844@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kbuf is assigned first, so it does not need to initialize the assignment.
Link: https://lkml.kernel.org/r/20240115062519.31298-1-zeming@nfschina.com
Signed-off-by: Li zeming <zeming@nfschina.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
with GCC 13.2.1 and W=1, there's compiling warning like this:
kernel/panic.c: In function `__warn':
kernel/panic.c:676:17: warning: function `__warn' might be a candidate for `gnu_printf' format attribute [-Wsuggest-attribute=format]
676 | vprintk(args->fmt, args->args);
| ^~~~~~~
The normal __printf(x,y) adding can't fix it. So add workaround which
disables -Wsuggest-attribute=format to mute it.
Link: https://lkml.kernel.org/r/20240107091641.579849-1-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ilog2() rounds down, so for example when PowerPC 85xx sets CONFIG_NR_CPUS
to 24, we will only allocate 4 bits to store the number of CPUs instead of
5. Use bits_per() instead, which rounds up. Found by code inspection.
The effect of this would probably be a misaccounting when doing NUMA
balancing, so to a user, it would only be a performance penalty. The
effects may be more wide-spread; it's hard to tell.
Link: https://lkml.kernel.org/r/20231010145549.1244748-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 90572890d2 ("mm: numa: Change page last {nid,pid} into {cpu,pid}")
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During CPU-down hotplug, hrtimers may migrate to isolated CPUs,
compromising CPU isolation.
Address this issue by masking valid CPUs for hrtimers using
housekeeping_cpumask(HK_TYPE_TIMER).
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20240222200856.569036-1-costa.shul@redhat.com
Recently, st_ops->cfi_stubs was introduced. However, the upcoming new
struct_ops support (e.g. sched_ext) is not aware of this and does not
provide its own cfi_stubs. The kernel ends up NULL dereferencing the
st_ops->cfi_stubs.
Considering struct_ops supports kernel module now, this NULL check
is necessary. This patch is to reject struct_ops registration
that does not provide a cfi_stubs.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240222021105.1180475-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
During the static checks nr_states has been mentioned by the kernel test
robot. Fix the warning in those 2 places.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
set_memory_ro() and set_memory_rw() can fail, leaving memory
unprotected.
Take the returned value into account and abort in case of
failure.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the default compression algorithm is selected based on
compile time options. Introduce a module parameter "hibernate.compressor"
to override this behaviour.
Different compression algorithms have different characteristics and
hibernation may benefit when it uses any of these algorithms, especially
when a secondary algorithm(LZ4) offers better decompression speeds over
a default algorithm(LZO), which in turn reduces hibernation image
restore time.
Users can override the default algorithm in two ways:
1) Passing "hibernate.compressor" as kernel command line parameter.
Usage:
LZO: hibernate.compressor=lzo
LZ4: hibernate.compressor=lz4
2) Specifying the algorithm at runtime.
Usage:
LZO: echo lzo > /sys/module/hibernate/parameters/compressor
LZ4: echo lz4 > /sys/module/hibernate/parameters/compressor
Currently LZO and LZ4 are the supported algorithms. LZO is the default
compression algorithm used with hibernation.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All pr_debug() prints in (mm/cma.c) could be enabled via standard Makefile
based method. Besides cma_debug_show_areas() should always be called
during cma_alloc() failure path. This seemingly redundant config,
CONFIG_CMA_DEBUG can be dropped without any problem.
[lukas.bulwahn@gmail.com: remove debug code to removed CONFIG_CMA_DEBUG]
Link: https://lkml.kernel.org/r/20240207143825.986-1-lukas.bulwahn@gmail.com
Link: https://lkml.kernel.org/r/20240205031647.283510-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall
page through bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eUOc
-----END PGP SIGNATURE-----
Merge tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
When CONFIG_WQ_CPU_INTENSIVE_REPORT is set, the kernel will report
the work functions which violate the intensive_threshold_us repeatedly.
And now, only when the violate times exceed 4 and is a power of 2,
the kernel warning could be triggered.
However, sometimes, even if a long work execution time occurs only once,
it may cause other work to be delayed for a long time. This may also
cause some problems sometimes.
In order to freely control the threshold of warninging, a boot argument
is added so that the user can control the warning threshold to be printed.
At the same time, keep the exponential backoff to prevent reporting too much.
By default, the warning threshold is 4.
tj: Updated kernel-parameters.txt description.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- While working on the ring buffer I noticed that the counter used
for knowing where the end of the data is on a sub-buffer was not
a full "int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size
bigger than 2^20. If that happens, unexpected results may
occur as there's no code checking if the counter overflowed the
20 bits of the write mask. There are other checks to make sure
events fit in the sub-buffer, but if the sub-buffer itself is
too big, that is not checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much
data is on it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZdaf+RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjEIAQDpsvHqUFNoG5fkRlWr2U0hNl5M6zLI
xTf2mWoG/h8bwQD+NfiRC2UrD5EaubO15z0z6MxScOl1H9X+iI7WVwZkqQ8=
=txOr
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- While working on the ring buffer I noticed that the counter used for
knowing where the end of the data is on a sub-buffer was not a full
"int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size bigger
than 2^20. If that happens, unexpected results may occur as there's
no code checking if the counter overflowed the 20 bits of the write
mask. There are other checks to make sure events fit in the
sub-buffer, but if the sub-buffer itself is too big, that is not
checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much data is
on it.
* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not let subbuf be bigger than write mask
The timer pull model is in place so we can remove the heuristics which try
to guess the best target CPU at enqueue/modification time.
All non pinned timers are queued on the local CPU in the separate storage
and eventually pulled at expiry time to a remote CPU.
Originally-by: Richard Cochran (linutronix GmbH) <richardcochran@gmail.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-21-anna-maria@linutronix.de
The timer pull logic needs proper debugging aids. Add tracepoints so the
hierarchical idle machinery can be diagnosed.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222103403.31923-1-anna-maria@linutronix.de
Placing timers at enqueue time on a target CPU based on dubious heuristics
does not make any sense:
1) Most timer wheel timers are canceled or rearmed before they expire.
2) The heuristics to predict which CPU will be busy when the timer expires
are wrong by definition.
So placing the timers at enqueue wastes precious cycles.
The proper solution to this problem is to always queue the timers on the
local CPU and allow the non pinned timers to be pulled onto a busy CPU at
expiry time.
Therefore split the timer storage into local pinned and global timers:
Local pinned timers are always expired on the CPU on which they have been
queued. Global timers can be expired on any CPU.
As long as a CPU is busy it expires both local and global timers. When a
CPU goes idle it arms for the first expiring local timer. If the first
expiring pinned (local) timer is before the first expiring movable timer,
then no action is required because the CPU will wake up before the first
movable timer expires. If the first expiring movable timer is before the
first expiring pinned (local) timer, then this timer is queued into an idle
timerqueue and eventually expired by another active CPU.
To avoid global locking the timerqueues are implemented as a hierarchy. The
lowest level of the hierarchy holds the CPUs. The CPUs are associated to
groups of 8, which are separated per node. If more than one CPU group
exist, then a second level in the hierarchy collects the groups. Depending
on the size of the system more than 2 levels are required. Each group has a
"migrator" which checks the timerqueue during the tick for remote expirable
timers.
If the last CPU in a group goes idle it reports the first expiring event in
the group up to the next group(s) in the hierarchy. If the last CPU goes
idle it arms its timer for the first system wide expiring timer to ensure
that no timer event is missed.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240222103710.32582-1-anna-maria@linutronix.de
To prepare for the conversion of the NOHZ timer placement to a pull at
expiry time model it's required to have a function that returns the value
of the is_idle flag of the timer base to keep the hierarchy states during
online in sync with timer base state.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-18-anna-maria@linutronix.de
The logic to get the time of the last jiffies update will be needed by
the timer pull model as well.
Move the code into a global function in anticipation of the new caller.
No functional change.
Signed-off-by: Richard Cochran (linutronix GmbH) <richardcochran@gmail.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-17-anna-maria@linutronix.de
Due to the conversion of the NOHZ timer placement to a pull at expiry
time model, the per CPU timer bases with non pinned timers are no
longer handled only by the local CPU. In case a remote CPU already
expires the non pinned timers base of the local CPU, nothing more
needs to be done by the local CPU. A check at the begin of the expire
timers routine is required, because timer base lock is dropped before
executing the timer callback function.
This is a preparatory work, but has no functional impact right now.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-16-anna-maria@linutronix.de
Move the locking out from __run_timers() to the call sites, so the
protected section can be extended at the call site. Preparatory work for
changing the NOHZ timer placement to a pull at expiry time model.
No functional change.
Signed-off-by: Richard Cochran (linutronix GmbH) <richardcochran@gmail.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-15-anna-maria@linutronix.de
To prepare for the conversion of the NOHZ timer placement to a pull at
expiry time model it's required to have functionality available getting the
next timer interrupt on a remote CPU.
Locking of the timer bases and getting the information for the next timer
interrupt functionality is split into separate functions. This is required
to be compliant with lock ordering when the new model is in place.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-14-anna-maria@linutronix.de
The functionality for getting the next timer interrupt in
get_next_timer_interrupt() is split into a separate function
fetch_next_timer_interrupt() to be usable by other call sites.
This is preparatory work for the conversion of the NOHZ timer
placement to a pull at expiry time model. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-13-anna-maria@linutronix.de
For the conversion of the NOHZ timer placement to a pull at expiry time
model it's required to have separate expiry times for the pinned and the
non-pinned (movable) timers. Therefore struct timer_events is introduced.
No functional change
Originally-by: Richard Cochran (linutronix GmbH) <richardcochran@gmail.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-12-anna-maria@linutronix.de
Separate the storage space for pinned timers. Deferrable timers (doesn't
matter if pinned or non pinned) are still enqueued into their own base.
This is preparatory work for changing the NOHZ timer placement from a push
at enqueue time to a pull at expiry time model.
Originally-by: Richard Cochran (linutronix GmbH) <richardcochran@gmail.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-11-anna-maria@linutronix.de
Split the logic for getting next timer interrupt (no matter of recalculated
or already stored in base->next_expiry) into a separate function named
next_timer_interrupt(). Make it available to local call sites only.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-10-anna-maria@linutronix.de
The logic for raising a softirq the way it is implemented right now, is
readable for two timer bases. When increasing the number of timer bases,
code gets harder to read. With the introduction of the timer migration
hierarchy, there will be three timer bases.
Therefore restructure the code to use a loop. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-9-anna-maria@linutronix.de
When adding a timer to the timer wheel using add_timer_on(), it is an
implicitly pinned timer. With the timer pull at expiry time model in place,
the TIMER_PINNED flag is required to make sure timers end up in proper
base.
Set the TIMER_PINNED flag unconditionally when add_timer_on() is executed.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-8-anna-maria@linutronix.de
The implementation of the NOHZ pull at expiry model will change the timer
bases per CPU. Timers, that have to expire on a specific CPU, require the
TIMER_PINNED flag. If the CPU doesn't matter, the TIMER_PINNED flag must be
dropped. This is required for call sites which use the timer alternately as
pinned and not pinned timer like workqueues do.
Therefore use add_timer_global() in __queue_delayed_work() for non-bound
delayed work to make sure the TIMER_PINNED flag is dropped.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-7-anna-maria@linutronix.de
A timer might be used as a pinned timer (using add_timer_on()) and later on
as non-pinned timer using add_timer(). When the "NOHZ timer pull at expiry
model" is in place, the TIMER_PINNED flag is required to be used whenever a
timer needs to expire on a dedicated CPU. Otherwise the flag must not be
set if expiration on a dedicated CPU is not required.
add_timer_on()'s behavior will be changed during the preparation patches
for the "NOHZ timer pull at expiry model" to unconditionally set the
TIMER_PINNED flag. To be able to clear/ set the flag when queueing a
timer, two variants of add_timer() are introduced.
This is a preparatory step and has no functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-6-anna-maria@linutronix.de
When tick is stopped also the timer base is_idle flag is set. When
reentering timer_base_try_to_set_idle() with the tick stopped, there is no
need to check whether the timer base needs to be set idle again. When a
timer was enqueued in the meantime, this is already handled by the
tick_nohz_next_event() call which was executed before
tick_nohz_stop_tick().
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-5-anna-maria@linutronix.de
The timer base is marked idle when get_next_timer_interrupt() is
executed. But the decision whether the tick will be stopped and whether the
system is able to go idle is done later. When the timer bases is marked
idle and a new first timer is enqueued remote an IPI is raised. Even if it
is not required because the tick is not stopped and the timer base is
evaluated again at the next tick.
To prevent this, the timer base is marked idle in tick_nohz_stop_tick() and
get_next_timer_interrupt() is streamlined by only looking for the next timer
interrupt. All other work is postponed to timer_base_try_to_set_idle() which is
called by tick_nohz_stop_tick(). timer_base_try_to_set_idle() never resets
timer_base::is_idle state. This is done when the tick is restarted via
tick_nohz_restart_sched_tick().
With this, tick_sched::tick_stopped and timer_base::is_idle are always in
sync. So there is no longer the need to execute timer_clear_idle() in
tick_nohz_idle_retain_tick(). This was required before, as
tick_nohz_next_event() set timer_base::is_idle even if the tick would not be
stopped. So timer_clear_idle() is only executed, when timer base is idle. So the
check whether timer base is idle, is now no longer required as well.
While at it fix some nearby whitespace damage as well.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-4-anna-maria@linutronix.de
Split out get_next_timer_interrupt() to be able to extend it and make it
reusable for other call sites.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-3-anna-maria@linutronix.de
get_next_timer_interrupt() contains two parts for the next timer interrupt
calculation. Those two parts are separated by forwarding the base
clock. But the second part does not depend on the forwarded base
clock.
Therefore restructure get_next_timer_interrupt() to keep things together
which belong together.
No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240221090548.36600-2-anna-maria@linutronix.de
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZdaBCwAKCRDbK58LschI
g3EhAP0d+S18mNabiEGz8efnE2yz3XcFchJgjiRS8WjOv75GvQEA6/sWncFjbc8k
EqxPHmeJa19rWhQlFrmlyNQfLYGe4gY=
=VkOs
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now all callers of mm_counter_file() have a folio, convert
mm_counter_file() to take a folio. Saves a call to compound_head() hidden
inside PageSwapBacked().
Link: https://lkml.kernel.org/r/20240111152429.3374566-11-willy@infradead.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The data on the subbuffer is measured by a write variable that also
contains status flags. The counter is just 20 bits in length. If the
subbuffer is bigger than then counter, it will fail.
Make sure that the subbuffer can not be set to greater than the counter
that keeps track of the data on the subbuffer.
Link: https://lore.kernel.org/linux-trace-kernel/20240220095112.77e9cb81@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 2808e31ec1 ("ring-buffer: Add interface for configuring trace sub buffer size")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
On a 8-socket server the TSC is wrongly marked as 'unstable' and disabled
during boot time on about one out of 120 boot attempts:
clocksource: timekeeping watchdog on CPU227: wd-tsc-wd excessive read-back delay of 153560ns vs. limit of 125000ns,
wd-wd read-back delay only 11440ns, attempt 3, marking tsc unstable
tsc: Marking TSC unstable due to clocksource watchdog
TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
sched_clock: Marking unstable (119294969739, 159204297)<-(125446229205, -5992055152)
clocksource: Checking clocksource tsc synchronization from CPU 319 to CPUs 0,99,136,180,210,542,601,896.
clocksource: Switched to clocksource hpet
The reason is that for platform with a large number of CPUs, there are
sporadic big or huge read latencies while reading the watchog/clocksource
during boot or when system is under stress work load, and the frequency and
maximum value of the latency goes up with the number of online CPUs.
The cCurrent code already has logic to detect and filter such high latency
case by reading the watchdog twice and checking the two deltas. Due to the
randomness of the latency, there is a low probabilty that the first delta
(latency) is big, but the second delta is small and looks valid. The
watchdog code retries the readouts by default twice, which is not
necessarily sufficient for systems with a large number of CPUs.
There is a command line parameter 'max_cswd_read_retries' which allows to
increase the number of retries, but that's not user friendly as it needs to
be tweaked per system. As the number of required retries is proportional to
the number of online CPUs, this parameter can be calculated at runtime.
Scale and enlarge the number of retries according to the number of online
CPUs and remove the command line parameter completely.
[ tglx: Massaged change log and comments ]
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jin Wang <jin1.wang@intel.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240221060859.1027450-1-feng.tang@intel.com
'days' is a s64 (from div_s64), and so should use a %lld specifier.
This was found by extending KUnit's assertion macros to use gcc's
__printf attribute.
Fixes: 2760105516 ("time: Improve performance of time64_to_tm()")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240221092728.1281499-5-davidgow@google.com
Right now we determine the scope of the signal based on the type of
pidfd. There are use-cases where it's useful to override the scope of
the signal. For example in [1]. Add flags to determine the scope of the
signal:
(1) PIDFD_SIGNAL_THREAD: send signal to specific thread reference by @pidfd
(2) PIDFD_SIGNAL_THREAD_GROUP: send signal to thread-group of @pidfd
(2) PIDFD_SIGNAL_PROCESS_GROUP: send signal to process-group of @pidfd
Since we now allow specifying PIDFD_SEND_PROCESS_GROUP for
pidfd_send_signal() to send signals to process groups we need to adjust
the check restricting si_code emulation by userspace to account for
PIDTYPE_PGID.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://github.com/systemd/systemd/issues/31093 [1]
Link: https://lore.kernel.org/r/20240210-chihuahua-hinzog-3945b6abd44a@brauner
Link: https://lore.kernel.org/r/20240214123655.GB16265@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
- set_work_data() takes a separate @flags argument but just ORs it to @data.
This is more confusing than helpful. Just take @data.
- Use the name @flags consistently and add the parameter to
set_work_pool_and_{keep|clear}_pending(). This will be used by the planned
disable/enable support.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
clear_work_data() is only used in one place and immediately followed by
smp_mb(), making it equivalent to set_work_pool_and_clear_pending() w/
WORK_OFFQ_POOL_NONE for @pool_id. Drop it. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
The planned disable/enable support will need the same logic. Let's factor it
out. No functional changes.
v2: Update function comment to include @irq_flags.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
The bits of work->data are used for a few different purposes. How the bits
are used is determined by enum work_bits. The planned disable/enable support
will add another use, so let's clean it up a bit in preparation.
- Let WORK_STRUCT_*_BIT's values be determined by enum definition order.
- Deliminate different bit sections the same way using SHIFT and BITS
values.
- Rename __WORK_OFFQ_CANCELING to WORK_OFFQ_CANCELING_BIT for consistency.
- Introduce WORK_STRUCT_PWQ_SHIFT and replace WORK_STRUCT_FLAG_MASK and
WORK_STRUCT_WQ_DATA_MASK with WQ_STRUCT_PWQ_MASK for clarity.
- Improve documentation.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
The cancel path used bool @is_dwork to distinguish canceling a regular work
and a delayed one. The planned disable/enable support will need passing
around another flag in the code path. As passing them around with bools will
be confusing, let's introduce named flags to pass around in the cancel path.
WORK_CANCEL_DELAYED replaces @is_dwork. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Using the generic term `flags` for irq flags is conventional but can be
confusing as there's quite a bit of code dealing with work flags which
involves some subtleties. Let's use a more explicit name `irq_flags` for
local irq flags. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
They are currently a bit disorganized with flush and cancel functions mixed.
Reoranize them so that flush functions come first, cancel next and
cancel_sync last. This way, we won't have to add prototypes for internal
functions for the planned disable/enable support.
This is pure code reorganization. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
__cancel_work_timer() is used to implement cancel_work_sync() and
cancel_delayed_work_sync(), similarly to how __cancel_work() is used to
implement cancel_work() and cancel_delayed_work(). ie. The _timer part of
the name is a complete misnomer. The difference from __cancel_work() is the
fact that it syncs against work item execution not whether it handles timers
or not.
Let's rename it to less confusing __cancel_work_sync(). No functional
change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
The different flavors of RCU read critical sections have been unified. Let's
update the locking assertion macros accordingly to avoid requiring
unnecessary explicit rcu_read_[un]lock() calls.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
