Commit Graph

968 Commits

Author SHA1 Message Date
Colin Ian King
fd3223966c [media] helene: fix memory leak when heleno_x_pon fails
The error return path of failed calls to heleno_x_pon leak
memory because priv is not kfree'd.  Fix this by kfree'ing
priv before returning.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 16:54:54 -03:00
Christophe JAILLET
d259a5eed9 [media] drxd_hard: Add missing error code assignment before test
It is likely that checking the result of the 2nd 'read16' is expected here.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 16:22:16 -03:00
Wolfram Sang
20ff0166a5 [media] media: dvb-frontends: rtl2832_sdr: don't print error when allocating urb fails
kmalloc will print enough information in case of failure.

Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 08:46:41 -03:00
Arnd Bergmann
bb9bd87808 drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warning
The addition of jump label support in dynamic_debug caused an unexpected
warning in exactly one file in the kernel:

  drivers/media/dvb-frontends/cxd2841er.c: In function 'cxd2841er_tune_tc':
  include/linux/dynamic_debug.h:134:3: error: 'carrier_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     __dynamic_dev_dbg(&descriptor, dev, fmt, \
     ^~~~~~~~~~~~~~~~~
  drivers/media/dvb-frontends/cxd2841er.c:3177:11: note: 'carrier_offset' was declared here
    int ret, carrier_offset;
             ^~~~~~~~~~~~~~

The problem seems to be that the compiler gets confused by the extra
conditionals in static_branch_unlikely, to the point where it can no
longer keep track of which branches have already been taken, and it
doesn't realize that this variable is now always initialized when it
gets used.

I have done lots of randconfig kernel builds and could not find any
other file with this behavior, so I assume it's a rare enough glitch
that we don't need to change the jump label support but instead just
work around the warning in the driver.

To achieve that, I'm moving the check for the return value into the
switch() statement, which is an obvious transformation, but is enough to
un-confuse the compiler here.  The resulting code is not as nice to
read, but at least we retain the behavior of warning if it gets changed
to actually access an uninitialized carrier offset value in the future.

Link: http://lkml.kernel.org/r/20160713204342.1221511-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Abylay Ospan <aospan@netup.ru>
Cc: Sergey Kozlov <serjk@netup.ru>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Abylay Ospan
e05b1872f2 [media] cxd2841er: Reading SNR for DVB-C added
Now driver returns correct values for DVB-C:
 SNR (in dB)

[mchehab@s-opensource.com: fix a new function to be static]
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-16 07:01:31 -03:00
Abylay Ospan
a6f330cbb3 [media] cxd2841er: Reading BER and UCB for DVB-C added
now driver returns correct values for DVB-C:
 BER (post_bit_count and post_bit_error values)
 UCB (count of uncorrected errors)
also, some code cleanup was done - checkpatch.pl now is happy

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-16 06:59:43 -03:00
Abylay Ospan
997bdc0c8e [media] cxd2841er: fix switch-case for DVB-C
DVB-C should use cxd2841er_read_agc_gain_c() to get the gain. The same
function is used for all DVB-C annex delivery systems.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-16 06:58:59 -03:00
Mauro Carvalho Chehab
313a7dfb23 [media] cxd2841er: fix signal strength scale for ISDB-T
The scale for ISDB-T was wrong too: it was inverted, and
on a relative scale.

Use a linear interpolation to make it look better.
The formula was empirically determined, using 3 frequencies
(175 MHz, 410 MHz and 800 MHz), measuring from -50dBm to
-12dBm in steps of 0.5dB.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-16 06:56:28 -03:00
Mauro Carvalho Chehab
d12b791e3d [media] cxd2841er: adjust the dB scale for DVB-C
Instead of using a relative frequency range, calibrate it to
show the results in dB. The callibration was done getting
samples with a signal generated from -50dBm to -12dBm,
incremented in steps of 0.5 dB, using 3 frequencies:
175 MHz, 410 MHz and 800 MHz. The modulated signal was
using QAM64, and it was used a linear interpolation of all
the results.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-16 06:56:03 -03:00
Mauro Carvalho Chehab
988bd281d3 [media] cxd2841er: provide signal strength for DVB-C
Currently, there's no stats for DVB-C. Let's at least return
signal strength. The scale is different than on DVB-T, so let's
use a relative scale, for now.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-16 06:55:30 -03:00
Mauro Carvalho Chehab
4216be14be [media] cxd2841er: fix BER report via DVBv5 stats API
What userspace expects is to receive both bit_error and bit_count
counters. So, instead of doing the division at the Kernel,
return the counters for userspace to handle it the way it
wants.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-16 06:53:46 -03:00
Colin Ian King
eca2d34b9d [media] mb86a20s: apply mask to val after checking for read failure
Appling the mask 0x0f to the immediate return of the call to
mb86a20s_readreg will always result in a positive value, meaning that the
check of ret < 0 will never work.  Instead, check for a -ve return value
first, and then mask val with 0x0f.

Kudos to Mauro Carvalho Chehab for spotting the mistake in my original fix.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-15 13:32:58 -03:00
Saso Slavicic
cd82982179 [media] ascot2e: Fix I2C message size check
Tuning a card with Sony ASCOT2E produces the following error:

	kernel: i2c i2c-9: wr reg=0006: len=11 is too big!

MAX_WRITE_REGSIZE is defined as 10, buf[MAX_WRITE_REGSIZE + 1] buffer is
used in ascot2e_write_regs().

The problem is that exactly 10 bytes are written in ascot2e_set_params():

	/* Set BW_OFFSET (0x0F) value from parameter table */
	data[9] = ascot2e_sett[tv_system].bw_offset;
	ascot2e_write_regs(priv, 0x06, data, 10);

The test in write_regs is as follows:

	if (len + 1 >= sizeof(buf))

10 + 1 = 11 and that would be exactly the size of buf. Since 10 bytes +
buf[0] = reg would seem to fit into buf[], this shouldn't be an error.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-13 11:56:22 -03:00
Hans Verkuil
c93350a644 [media] af9033: fix compiler warnings
Fix two warnings:

af9033.c: In function 'af9033_read_status':
af9033.c:883:25: warning: 'snr_lut' may be used uninitialized in this function [-Wmaybe-uninitialized]
   const struct val_snr *snr_lut;
                         ^
af9033.c:952:25: warning: 'tmp' may be used uninitialized in this function [-Wmaybe-uninitialized]
   c->cnr.stat[0].svalue = tmp;
                         ^

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12 13:32:39 -03:00
Mauro Carvalho Chehab
f1b26622ec [media] cxd2841er: don't expose a dvbv5 stats to userspace if not available
The current code will expose a zero value if one of the stats is
not available, but this is not what userspace expects. Instead,
if something goes wrong on providing some stats, it should be
changing the scale to FE_SCALE_NOT_AVAILABLE.

So, change the logic to do the right thing.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 18:57:51 -03:00
Abylay Ospan
d0998ce76f [media] DVB-C read signal strength added for Sony demod
cxd2841er_read_agc_gain_c added to obtain signal strength.
signal strength now relay on AGC value.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 18:55:42 -03:00
Mauro Carvalho Chehab
5fda1b65c2 [media] cxd2841er: Fix signal strengh for DVB-T/T2 and show it in dBm
The signal strength value is reversed: the bigger the number,
the weaker is the signal.

Fix the logic and present it in dBm. Please notice that the
dBm measure is actually an estimation, as the ratio is not
fully linear. It also varies with the frequency.

Yet, the estimation should be good enough for programs like
Kaffeine to indicate when the signal is good or bad.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 18:55:14 -03:00
Mauro Carvalho Chehab
d0e20e13b7 [media] cxd2841er: Do some changes at the dvbv5 stats logic
It is a good idea to measure the signal strength while
tuning, as this helps to identify if the antenna is ok.
Also, such measure helps to identify the quality of the
signal.

Do some changes to enable it before signal lock. While
here, optimize the code to only initialize the stats
length once, and make sure that, just after set_frontend,
any reading for the stats that depends on lock to return
FE_SCALE_NOT_AVAILABLE.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 18:55:08 -03:00
Antti Palosaari
678fdb6889 [media] rtl2832: do not allow driver unbind
Disable runtime unbind as driver does not support it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 17:02:53 -03:00
Antti Palosaari
4a7e445b1b [media] rtl2830: move statistics to read_status()
Move statistics polling to read_status() in order to avoid use of
kernel work. Also replace home made sign extension used for
statistics with kernel sign_extend32().

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 17:02:33 -03:00
Antti Palosaari
95e7cdb7db [media] rtl2830: do not allow driver unbind
Disable runtime unbind as driver does not support it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 17:01:47 -03:00
Antti Palosaari
7281217531 [media] af9033: do not allow driver unbind
Disable runtime unbind as driver does not support it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 17:01:00 -03:00
Antti Palosaari
659a0999fd [media] af9033: move statistics to read_status()
Move statistics polling to read_status() in order to avoid use of
kernel work.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:59:38 -03:00
Antti Palosaari
60701d5f5b [media] m88ds3103: refactor firmware download
* remove some unneeded variable initialization
* rename variables
* use min() macro to calc max i2c xfer len
* change bad firmware error code from EFAULT to EINVAL

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:58:41 -03:00
Antti Palosaari
f5d9b88db7 [media] m88ds3103: use Hz instead of kHz on calculations
There was some calculations where was kHz used in order to keep
calculation withing 32-bit. Convert all to Hz and use 64-bit
division helpers where needed.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:58:05 -03:00
Antti Palosaari
334ef18e87 [media] m88ds3103: improve ts clock setting
Simplify TS clock divider calculation and programming slightly.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:56:54 -03:00
Antti Palosaari
9ef3cdc1ef [media] m88ds3103: calculate DiSEqC message sending time
DiSEqC message sending takes 13.5 ms per byte, which is 54 ms total
when typical 4 byte message is sent. Don't hard-code time limit to
54 ms, but calculate it. Time limit is only used to determine when to
start poll "DiSEqC Tx ready" status from the chip.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:56:18 -03:00
Antti Palosaari
92519f8f26 [media] m88ds3103: remove useless most significant bit clear
No need to clear negative msb bits as those were dropped in any
case when data is written to register.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:55:16 -03:00
Antti Palosaari
e06be1da13 [media] si2168: do not allow driver unbind
Disable runtime unbind as driver does not support it.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:54:28 -03:00
Antti Palosaari
6ab1e9438a [media] si2168: add support for newer firmwares
Si2168-B40 firmware API has changed somewhere between 4.0-11 and
4.0-19 so that sleep will lose firmware upgrade from the chip. Due
to that firmware re-upload is needed when newer firmwares are used.

Rewrote firmware handling logic partly at the same.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:53:55 -03:00
Hans Verkuil
36c0f8b32c [media] vb2: replace void *alloc_ctxs by struct device *alloc_devs
Make this a proper typed array. Drop the old allocate context code since
that is no longer used.

Note that the memops functions now get a struct device pointer instead of
the struct device ** that was there initially (actually a void pointer to
a struct containing only a struct device pointer).

This code is now a lot cleaner.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 14:45:07 -03:00
Mauro Carvalho Chehab
cf47faca25 dib0090: comment out the unused tables
Those tables are currently unused, so comment them out:

drivers/media/dvb-frontends/dib0090.c:852:18: warning: 'rf_ramp_pwm_sband' defined but not used [-Wunused-const-variable=]
 static const u16 rf_ramp_pwm_sband[] = {
                  ^~~~~~~~~~~~~~~~~
drivers/media/dvb-frontends/dib0090.c:800:18: warning: 'bb_ramp_pwm_boost' defined but not used [-Wunused-const-variable=]
 static const u16 bb_ramp_pwm_boost[] = {
                  ^~~~~~~~~~~~~~~~~

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-24 11:23:59 -03:00
Mauro Carvalho Chehab
01d7d436c6 drxj: comment out the unused nicam_presc_table_val table
Avoid this warning:

drivers/media/dvb-frontends/drx39xyj/drxj.c:1243:18: warning: 'nicam_presc_table_val' defined but not used [-Wunused-const-variable=]
 static const u16 nicam_presc_table_val[43] = {
                  ^~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-24 11:10:16 -03:00
Colin Ian King
cac1c639bc [media] m88rs2000: initialize status to zero
status is not initialized so it can contain garbage. The
check for status containing the FE_HAS_LOCK bit may randomly pass
or fail if the read of register 0x8c fails to set status after 25
read attempts.  Fix this by initializing status to 0.

Issue found with CoverityScan, CID#986738

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-10 08:41:36 -03:00
Martin Blumenstingl
d10f89cc36 [media] rtl2832: add support for slave ts pid filter
The rtl2832 demod has 2 sets of PID filters. This patch enables
the filter support when using a slave demod.

Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-09 08:48:46 -03:00
Olli Salonen
212fa08126 [media] ds3000: return error if invalid symbol rate is set
Return -EINVAL if ds3000_set_frontend is called with invalid parameters.

v1 of the patch series got incorrect subject lines.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 17:10:04 -03:00
Fengguang Wu
155af08b15 [media] fix semicolon.cocci warnings
drivers/media/dvb-frontends/helene.c:750:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 16:56:55 -03:00
Antti Palosaari
94d0eaa419 [media] mn88472: move out of staging to media
Move mn88472 DVB-T/T2/C demod driver out of staging to media.

v2: Fix build error reported by kbuild test robot:
drivers/staging/media/mn88472/Makefile: No such file or directory

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 15:46:47 -03:00
Antti Palosaari
8d1f38fcb7 [media] mn88472: finalize driver
Finalize driver in order to move out of staging.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 15:41:58 -03:00
Julia Lawall
c5ee19c866 [media] mn88473: fix typo
firmare -> firmware

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 15:39:01 -03:00
Antti Palosaari
37cf9b2d5b [media] mn88473: fix error path on probe()
Latest, 3rd, regmap instance should be freed on error case.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 15:38:44 -03:00
Mauro Carvalho Chehab
b6095d29a2 [media] helene: fix a warning when printing sizeof()
drivers/media/dvb-frontends/helene.c: In function 'helene_write_regs':
drivers/media/dvb-frontends/helene.c:312:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=]
     "wr reg=%04x: len=%d vs %lu is too big!\n",
     ^

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 12:19:32 -03:00
Abylay Ospan
9ca1736f8d [media] fix typo in SONY demodulator description
correct is CXD2841ER and CXD2854ER
incorrect was CXD2441ER and CXD2454ER

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 12:17:49 -03:00
Abylay Ospan
3f3b48a0c6 [media] Change frontend allocation strategy for NetUP Universal DVB cards
Old behaviour:
frontend0 - DVB-S/S2
frontend1 - DVB-T/T2
frontend2 - DVB-C
frontend3 - ISDB-T

New behaviour (DVBv5 API compliant):
frontend0 - DVB-S/S2
frontend1 - DVB-T/T2/C/ISDB-T

DTV standard should be selected by DTV_DELIVERY_SYSTEM call.

And DVB-C default bandwidth now 8MHz

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 12:16:37 -03:00
Abylay Ospan
6c77161a18 [media] support DVB-T2 for SONY CXD2841/54
bandwidth 1.7,5,6,7,8Mhz support for DVB-T2

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 12:15:12 -03:00
Abylay Ospan
1cdc4f09eb [media] fix DVB-S/S2 tuning
Fixed HELENE tuner frequency calculation

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 12:14:19 -03:00
Mauro Carvalho Chehab
76344a3fc5 [media] ISDB-T retune and offset fix and DVB-C bw fix
now when new tuning parameters specified demod should retune.
Also ISDB-T frequency offset calculation added
(cxd2841er_get_carrier_offset_i).

While here, fix re-tune for DVB-C Annex A, using the desired
bandwidth, instead of using 8MHz.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 12:13:50 -03:00
Abylay Ospan
4da093ce4e [media] Fix DVB-T frequency offset calculation
Fix offset calculation inside cxd2841er_get_carrier_offset_t
Now DVB-T should be tuned correctly

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 12:12:46 -03:00
Abylay Ospan
30ae3307ad [media] Sanity check when initializing DVB-S/S2 demodulator
Avoid error message:
cxd2841er_read_status_s(): invalid state 1
Always force demod to shutdown state before initializing

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 12:12:25 -03:00
Abylay Ospan
c5ea46dae9 [media] Add carrier offset calculation for DVB-T
Adding cxd2841er_get_carrier_offset_t to calculate DVB-T offset
for Sony demodulators CXD2841ER and CXD2854ER

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 12:11:59 -03:00