Commit Graph

26 Commits

Author SHA1 Message Date
Guru Das Srinagesh
a9d887dc1c pwm: Convert period and duty cycle to u64
Because period and duty cycle are defined as ints with units of
nanoseconds, the maximum time duration that can be set is limited to
~2.147 seconds. Change their definitions to u64 in the structs of the
PWM framework so that higher durations may be set.

Also use the right format specifiers in debug prints in both core.c,
pwm-stm32-lp.c as well as video/fbdev/ssd1307fb.c.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-06-17 20:42:11 +02:00
Linus Torvalds
6e2bbb688a pwm: Changes for v5.3-rc1
This set of changes contains a new driver for SiFive SoCs as well as
 enhancements to the core (device links are used to track dependencies
 between PWM providers and consumers, support for PWM controllers via
 ACPI, sysfs will now suspend/resume PWMs that it has claimed) and
 various existing drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl0V/lAZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoS+uD/0cJqcVhX1c2S/pHg1k4QFh
 wREnEbxMqWghcsSZcO0gk0hoRyxMNBM3iOldaKc3b5LVtEJOv/R7W6RB+FMcvPKA
 AtW/ydyfRZiqL9bIXs0hhaW4Fo0WCq6gZksDU5cOoq4KMHfkEp7D7U158ItsEtga
 ufDigs8fv/Z6c5DaEfoJ10I+VCy/We2YnCdIVZuL/MElFHlUupzRpGZv6uMRQ4WI
 z2/SEtHURoW103a3UrEmjqv0GeoHPrHwEP9kZTUuakyMxPmUtrSUJRybi79Cf27B
 jLYql8bXSkTsV6rUBtTRNtqQjD3hdjcFYaEdOle8n52/pYFohycmVvB/3xvr9tDC
 Wildg4Rniv4lcteB1hqB0M5km/szXGjPx5wozvmctwOia5sogG+8DWGp0fZO8Gsp
 vaF+GbTrM4LV1AzGJW7icTRFQG7VFUcZAglNW4o82hcXN1j9GpQ/qSOY3vgBigx+
 vyWrbCHBH2zjJNh1sSl68zi5q90T9IlXFfgR61kujbHYws+KrO3BJE2SW7qsLhsf
 HJnMBBxpoxvusBS/kbsWsDCnoGi4UsCeKUbmbfY1OjpCNlpp+cHSk6b4134Fmi66
 D8B+a4C1I/CNhcV72P+hAdrva4UXB6oJi4hZDE2/tEioXQB2wJO4AwWzjpifqzBY
 nGxZVPV7TuXj2KwCXDQnvw==
 =nseo
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes contains a new driver for SiFive SoCs as well as
  enhancements to the core (device links are used to track dependencies
  between PWM providers and consumers, support for PWM controllers via
  ACPI, sysfs will now suspend/resume PWMs that it has claimed) and
  various existing drivers"

* tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
  pwm: fsl-ftm: Make sure to unlock mutex on failure
  pwm: fsl-ftm: Use write protection for prescaler & polarity
  pwm: fsl-ftm: More relaxed permissions for updating period
  pwm: atmel-hlcdc: Add compatible for SAM9X60 HLCDC's PWM
  pwm: bcm2835: Improve precision of PWM
  leds: pwm: Support ACPI via firmware-node framework
  pwm: Add support referencing PWMs from ACPI
  pwm: rcar: Remove suspend/resume support
  pwm: sysfs: Add suspend/resume support
  pwm: Add power management descriptions
  pwm: meson: Add documentation to the driver
  pwm: meson: Add support PWM_POLARITY_INVERSED when disabling
  pwm: meson: Don't cache struct pwm_state internally
  pwm: meson: Read the full hardware state in meson_pwm_get_state()
  pwm: meson: Simplify the calculation of the pre-divider and count
  pwm: meson: Move pwm_set_chip_data() to meson_pwm_request()
  pwm: meson: Add the per-channel register offsets and bits in a struct
  pwm: meson: Add the meson_pwm_channel data to struct meson_pwm
  pwm: meson: Pass struct pwm_device to meson_pwm_calc()
  pwm: meson: Don't duplicate the polarity internally
  ...
2019-07-09 08:57:45 -07:00
Yoshihiro Shimoda
7fd4edc57b pwm: sysfs: Add suspend/resume support
According to the Documentation/pwm.txt, all PWM consumers should have
power management. Since this sysfs interface is one of consumers so that
this patch adds suspend/resume support.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
[thierry.reding@gmail.com: fix build warnings for !PM]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26 11:39:11 +02:00
Thomas Gleixner
3e0a4e8580 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 or at your option any
  later version this program is distributed in the hope that it will
  be useful but without any warranty without even the implied warranty
  of merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 44 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.032047323@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:39:02 +02:00
Uwe Kleine-König
9ff06679e1 pwm: sysfs: fix typo "its" -> "it's"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-20 12:34:14 +01:00
Phong Hoang
347ab94803 pwm: Fix deadlock warning when removing PWM device
This patch fixes deadlock warning if removing PWM device
when CONFIG_PROVE_LOCKING is enabled.

This issue can be reproceduced by the following steps on
the R-Car H3 Salvator-X board if the backlight is disabled:

 # cd /sys/class/pwm/pwmchip0
 # echo 0 > export
 # ls
 device  export  npwm  power  pwm0  subsystem  uevent  unexport
 # cd device/driver
 # ls
 bind  e6e31000.pwm  uevent  unbind
 # echo e6e31000.pwm > unbind

[   87.659974] ======================================================
[   87.666149] WARNING: possible circular locking dependency detected
[   87.672327] 5.0.0 #7 Not tainted
[   87.675549] ------------------------------------------------------
[   87.681723] bash/2986 is trying to acquire lock:
[   87.686337] 000000005ea0e178 (kn->count#58){++++}, at: kernfs_remove_by_name_ns+0x50/0xa0
[   87.694528]
[   87.694528] but task is already holding lock:
[   87.700353] 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c
[   87.707405]
[   87.707405] which lock already depends on the new lock.
[   87.707405]
[   87.715574]
[   87.715574] the existing dependency chain (in reverse order) is:
[   87.723048]
[   87.723048] -> #1 (pwm_lock){+.+.}:
[   87.728017]        __mutex_lock+0x70/0x7e4
[   87.732108]        mutex_lock_nested+0x1c/0x24
[   87.736547]        pwm_request_from_chip.part.6+0x34/0x74
[   87.741940]        pwm_request_from_chip+0x20/0x40
[   87.746725]        export_store+0x6c/0x1f4
[   87.750820]        dev_attr_store+0x18/0x28
[   87.754998]        sysfs_kf_write+0x54/0x64
[   87.759175]        kernfs_fop_write+0xe4/0x1e8
[   87.763615]        __vfs_write+0x40/0x184
[   87.767619]        vfs_write+0xa8/0x19c
[   87.771448]        ksys_write+0x58/0xbc
[   87.775278]        __arm64_sys_write+0x18/0x20
[   87.779721]        el0_svc_common+0xd0/0x124
[   87.783986]        el0_svc_compat_handler+0x1c/0x24
[   87.788858]        el0_svc_compat+0x8/0x18
[   87.792947]
[   87.792947] -> #0 (kn->count#58){++++}:
[   87.798260]        lock_acquire+0xc4/0x22c
[   87.802353]        __kernfs_remove+0x258/0x2c4
[   87.806790]        kernfs_remove_by_name_ns+0x50/0xa0
[   87.811836]        remove_files.isra.1+0x38/0x78
[   87.816447]        sysfs_remove_group+0x48/0x98
[   87.820971]        sysfs_remove_groups+0x34/0x4c
[   87.825583]        device_remove_attrs+0x6c/0x7c
[   87.830197]        device_del+0x11c/0x33c
[   87.834201]        device_unregister+0x14/0x2c
[   87.838638]        pwmchip_sysfs_unexport+0x40/0x4c
[   87.843509]        pwmchip_remove+0xf4/0x13c
[   87.847773]        rcar_pwm_remove+0x28/0x34
[   87.852039]        platform_drv_remove+0x24/0x64
[   87.856651]        device_release_driver_internal+0x18c/0x21c
[   87.862391]        device_release_driver+0x14/0x1c
[   87.867175]        unbind_store+0xe0/0x124
[   87.871265]        drv_attr_store+0x20/0x30
[   87.875442]        sysfs_kf_write+0x54/0x64
[   87.879618]        kernfs_fop_write+0xe4/0x1e8
[   87.884055]        __vfs_write+0x40/0x184
[   87.888057]        vfs_write+0xa8/0x19c
[   87.891887]        ksys_write+0x58/0xbc
[   87.895716]        __arm64_sys_write+0x18/0x20
[   87.900154]        el0_svc_common+0xd0/0x124
[   87.904417]        el0_svc_compat_handler+0x1c/0x24
[   87.909289]        el0_svc_compat+0x8/0x18
[   87.913378]
[   87.913378] other info that might help us debug this:
[   87.913378]
[   87.921374]  Possible unsafe locking scenario:
[   87.921374]
[   87.927286]        CPU0                    CPU1
[   87.931808]        ----                    ----
[   87.936331]   lock(pwm_lock);
[   87.939293]                                lock(kn->count#58);
[   87.945120]                                lock(pwm_lock);
[   87.950599]   lock(kn->count#58);
[   87.953908]
[   87.953908]  *** DEADLOCK ***
[   87.953908]
[   87.959821] 4 locks held by bash/2986:
[   87.963563]  #0: 00000000ace7bc30 (sb_writers#6){.+.+}, at: vfs_write+0x188/0x19c
[   87.971044]  #1: 00000000287991b2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1e8
[   87.978872]  #2: 00000000f739d016 (&dev->mutex){....}, at: device_release_driver_internal+0x40/0x21c
[   87.988001]  #3: 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c
[   87.995481]
[   87.995481] stack backtrace:
[   87.999836] CPU: 0 PID: 2986 Comm: bash Not tainted 5.0.0 #7
[   88.005489] Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT)
[   88.012791] Call trace:
[   88.015235]  dump_backtrace+0x0/0x190
[   88.018891]  show_stack+0x14/0x1c
[   88.022204]  dump_stack+0xb0/0xec
[   88.025514]  print_circular_bug.isra.32+0x1d0/0x2e0
[   88.030385]  __lock_acquire+0x1318/0x1864
[   88.034388]  lock_acquire+0xc4/0x22c
[   88.037958]  __kernfs_remove+0x258/0x2c4
[   88.041874]  kernfs_remove_by_name_ns+0x50/0xa0
[   88.046398]  remove_files.isra.1+0x38/0x78
[   88.050487]  sysfs_remove_group+0x48/0x98
[   88.054490]  sysfs_remove_groups+0x34/0x4c
[   88.058580]  device_remove_attrs+0x6c/0x7c
[   88.062671]  device_del+0x11c/0x33c
[   88.066154]  device_unregister+0x14/0x2c
[   88.070070]  pwmchip_sysfs_unexport+0x40/0x4c
[   88.074421]  pwmchip_remove+0xf4/0x13c
[   88.078163]  rcar_pwm_remove+0x28/0x34
[   88.081906]  platform_drv_remove+0x24/0x64
[   88.085996]  device_release_driver_internal+0x18c/0x21c
[   88.091215]  device_release_driver+0x14/0x1c
[   88.095478]  unbind_store+0xe0/0x124
[   88.099048]  drv_attr_store+0x20/0x30
[   88.102704]  sysfs_kf_write+0x54/0x64
[   88.106359]  kernfs_fop_write+0xe4/0x1e8
[   88.110275]  __vfs_write+0x40/0x184
[   88.113757]  vfs_write+0xa8/0x19c
[   88.117065]  ksys_write+0x58/0xbc
[   88.120374]  __arm64_sys_write+0x18/0x20
[   88.124291]  el0_svc_common+0xd0/0x124
[   88.128034]  el0_svc_compat_handler+0x1c/0x24
[   88.132384]  el0_svc_compat+0x8/0x18

The sysfs unexport in pwmchip_remove() is completely asymmetric
to what we do in pwmchip_add_with_polarity() and commit 0733424c9b
("pwm: Unexport children before chip removal") is a strong indication
that this was wrong to begin with. We should just move
pwmchip_sysfs_unexport() where it belongs, which is right after
pwmchip_sysfs_unexport_children(). In that case, we do not need
separate functions anymore either.

We also really want to remove sysfs irrespective of whether or not
the chip will be removed as a result of pwmchip_remove(). We can only
assume that the driver will be gone after that, so we shouldn't leave
any dangling sysfs files around.

This warning disappears if we move pwmchip_sysfs_unexport() to
the top of pwmchip_remove(), pwmchip_sysfs_unexport_children().
That way it is also outside of the pwm_lock section, which indeed
doesn't seem to be needed.

Moving the pwmchip_sysfs_export() call outside of that section also
seems fine and it'd be perfectly symmetric with pwmchip_remove() again.

So, this patch fixes them.

Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
[shimoda: revise the commit log and code]
Fixes: 76abbdde2d ("pwm: Add sysfs interface")
Fixes: 0733424c9b ("pwm: Unexport children before chip removal")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-03-20 12:21:31 +01:00
Fabrice Gasnier
552c02e3e7 pwm: Send a uevent on the pwmchip device upon channel sysfs (un)export
This patch sends a uevent (KOBJ_CHANGE) on the pwmchipN device,
everytime a pwmX channel has been exported/unexported via sysfs. This
allows udev to implement rules on such events, like:

SUBSYSTEM=="pwm*", PROGRAM="/bin/sh -c '\
        chown -R root:gpio /sys/class/pwm && chmod -R 770 /sys/class/pwm;\
        chown -R root:gpio
/sys/devices/platform/soc/*.pwm/pwm/pwmchip* && chmod -R 770
/sys/devices/platform/soc/*.pwm/pwm/pwmchip*\
'"

This is a replacement patch for commit 7e5d1fd75c ("pwm: Set class for
exported channels in sysfs"), see [1].

basic testing:
$ udevadm monitor --environment &
$ echo 0 > /sys/class/pwm/pwmchip0/export
KERNEL[197.321736] change   /devices/.../pwm/pwmchip0 (pwm)
ACTION=change
DEVPATH=/devices/.../pwm/pwmchip0
EXPORT=pwm0
SEQNUM=2045
SUBSYSTEM=pwm

[1] https://lkml.org/lkml/2018/9/25/713

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Tested-by: Gottfried Haider <gottfried.haider@gmail.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-10-12 13:51:33 +02:00
Fabrice Gasnier
c289d66252 Revert "pwm: Set class for exported channels in sysfs"
This reverts commit 7e5d1fd75c ("pwm: Set
class for exported channels in sysfs") as it causes regression with
multiple pwm chip[1], when exporting a pwm channel (echo X > export):

- ABI (Documentation/ABI/testing/sysfs-class-pwm) states pwmX should be
  created in /sys/class/pwm/pwmchipN/pwmX
- Reverted patch causes new entry to be also created directly in
  /sys/class/pwm/pwmX
- 1st time, exporting pwmX will create an entry in /sys/class/pwm/pwmX
- class attributes are added under pwmX folder, such as export, unexport
  npwm, symlinks. This is wrong as it belongs to pwmchipN. It may cause
  bad behavior and report wrong values.
- when another export happens on another pwmchip, it can't be created
  (e.g. -EEXIST). This is causing the issue with multiple pwmchip.

Example on stm32 (stm32429i-eval) platform:
$ ls /sys/class/pwm
pwmchip0 pwmchip4

$ cd /sys/class/pwm/pwmchip0/
$ echo 0 > export
$ ls /sys/class/pwm
pwm0 pwmchip0 pwmchip4

$ cd /sys/class/pwm/pwmchip4/
$ echo 0 > export
sysfs: cannot create duplicate filename '/class/pwm/pwm0'
...Exception stack follows...

This is also seen on other platform [2]

[1] https://lkml.org/lkml/2018/9/25/713
[2] https://lkml.org/lkml/2018/9/25/447

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Tested-by: Gottfried Haider <gottfried.haider@gmail.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-10-12 13:51:11 +02:00
Arvind Yadav
8bbf5b4261 pwm: sysfs: Use put_device() instead of kfree()
Never directly free @dev after calling device_register(), even if it
returned an error! Always use put_device() to give up the reference
initialized.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-03-28 01:18:53 +02:00
Gottfried Haider
7e5d1fd75c pwm: Set class for exported channels in sysfs
Notifications for devices without bus or class set get dropped by
dev_uevent_filter(). Adding the class to the exported child matches
what the GPIO subsystem is doing.

With this change exporting a channel triggers a udev event, which
gives userspace a chance to fixup permissions and makes it possible
for non-root users to make use of the PWM subsystem.

Signed-off-by: Gottfried Haider <gottfried.haider@gmail.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: H Hartley Sweeten <hsweeten@visionengravers.com>
CC: linux-pwm@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-rpi-kernel@lists.infradead.org
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-12-05 09:24:58 +01:00
Johan Hovold
0e1614ac84 pwm: Fix device reference leak
Make sure to drop the reference to the parent device taken by
class_find_device() after "unexporting" any children when deregistering
a PWM chip.

Fixes: 0733424c9b ("pwm: Unexport children before chip removal")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-11-29 16:43:24 +01:00
David Hsu
0733424c9b pwm: Unexport children before chip removal
Exported pwm channels aren't removed before the pwmchip and are
leaked. This results in invalid sysfs files. This fix removes
all exported pwm channels before chip removal.

Signed-off-by: David Hsu <davidhsu@google.com>
Fixes: 76abbdde2d ("pwm: Add sysfs interface")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-09-05 16:45:39 +02:00
Thierry Reding
bd2686122d Merge branch 'for-4.8/capture' into for-next 2016-07-25 16:23:39 +02:00
Lee Jones
1a366fe915 pwm: sysfs: Add PWM capture support
Allow a user to read PWM capture results from sysfs. To start a capture
and read the result, simply read the file:

  $ cat $PWMCHIP/capture

The output format is "<period> <duty cycle>".

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10 16:01:40 +02:00
Ryo Kodama
fe5aa34d6e pwm: sysfs: Get return value from pwm_apply_state()
This patch adds to check the return value from pwm_apply_state()
used in enable_store(). The error of enable_store() doesn't work
if the return value doesn't received.

Signed-off-by: Ryo Kodama <ryo.kodama.vz@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 39100ceea7 ("pwm: Switch to the atomic API")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10 14:24:40 +02:00
Boris Brezillon
39100ceea7 pwm: Switch to the atomic API
Replace legacy pwm_get/set_xxx() and pwm_config/enable/disable() calls
by pwm_get/apply_state().

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:48:04 +02:00
Boris BREZILLON
459a25afe9 pwm: Get rid of pwm->lock
PWM devices are not protected against concurrent accesses. The lock in
struct pwm_device might let PWM users think it is, but it's actually
only protecting the enabled state.

Removing this lock should be fine as long as all PWM users are aware
that accesses to the PWM device have to be serialized, which seems to be
the case for all of them except the sysfs interface. Patch the sysfs
code by adding a lock to the pwm_export struct and making sure it's
taken for all relevant accesses to the exported PWM device.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:44:59 +02:00
Olliver Schinagl
65cdc6914a pwm: sysfs: Make use of the DEVICE_ATTR_[RW][WO] macro's
For the npwm property the PWM sysfs interface already made use of the
DEVICE_ATTR_RO macro. This patch expands this to the other sysfs
properties so that the code base is concise and makes use of this
helpful macro.

This has the advantage of slightly reducing the code size, improving
readability and no longer using magic values for permissions.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-10 13:06:46 +01:00
Olliver Schinagl
0344d0d69b pwm: sysfs: Remove unnecessary temporary variable
Use the result of pwm_is_enabled() directly instead of storing it in a
temporary variable.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-10 13:06:45 +01:00
Thierry Reding
412820dd53 pwm: sysfs: Remove unnecessary padding
Padding initializers so that assignment operators align is bound to lead
to inconsistencies or churn. Single spaces around the assignment is just
fine.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-07-27 12:03:38 +02:00
Thierry Reding
5a063d87e9 pwm: sysfs: Properly convert from enum to string
The current code will check for polarity in a boolean way. While it is
correct that polarity is either normal or inversed, make it more obvious
that it's an enumeration by using a switch statement and explicit
matches on the enumeration values.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-07-27 12:03:37 +02:00
Boris Brezillon
15da7b5001 pwm: Make use of pwm_get_xxx() helpers where appropriate
Use the pwm_get_xxx() helpers instead of directly accessing the fields
in struct pwm_device. This will allow us to smoothly move to the atomic
update approach.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-07-20 09:53:22 +02:00
Boris Brezillon
5c31252c4a pwm: Add the pwm_is_enabled() helper
Some PWM drivers are testing the PWMF_ENABLED flag. Create a helper
function to hide the logic behind enabled test. This will allow us to
smoothly move from the current approach to an atomic PWM update
approach.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-07-20 09:46:06 +02:00
Axel Lin
6ca142ad0d pwm: sysfs: Convert to use ATTRIBUTE_GROUPS macro
Use new ATTRIBUTE_GROUPS macro to reduce the number of lines of code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-04 11:35:28 +01:00
Greg Kroah-Hartman
9da0175963 pwm: convert class code to use dev_groups
The dev_attrs field of struct class is going away soon, dev_groups
should be used instead.  This converts the PWM class code to use the
correct field.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-07-29 09:08:33 +02:00
H Hartley Sweeten
76abbdde2d pwm: Add sysfs interface
Add a simple sysfs interface to the generic PWM framework.

  /sys/class/pwm/
  `-- pwmchipN/           for each PWM chip
      |-- export          (w/o) ask the kernel to export a PWM channel
      |-- npwm            (r/o) number of PWM channels in this PWM chip
      |-- pwmX/           for each exported PWM channel
      |   |-- duty_cycle  (r/w) duty cycle (in nanoseconds)
      |   |-- enable      (r/w) enable/disable PWM
      |   |-- period      (r/w) period (in nanoseconds)
      |   `-- polarity    (r/w) polarity of PWM (normal/inversed)
      `-- unexport        (w/o) return a PWM channel to the kernel

Based on work by Lars Poeschel.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Lars Poeschel <poeschel@lemonage.de>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-21 11:32:51 +02:00