The FIELDPIC_FLAG_E bit should be set when field_pic_flag exists in stream,
it is currently set based on field_pic_flag of current frame.
The PIC_FIELDMODE_E bit is correctly set based on the field_pic_flag.
Fix this by setting the FIELDPIC_FLAG_E bit when frame_mbs_only is not set.
Fixes: dea0a82f3d ("media: hantro: Add support for H264 decoding on G1")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
pic_size in hantro_h264_dec_hw_ctx struct is no longer used,
lets remove it.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Calculations for motion vector buffer offset is based on width and height
from the configured output format, lets use the same values for macroblock
width and height hw regs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A decoded 8-bit 4:2:0 frame need memory for up to 448 bytes per
macroblock with additional 32 bytes on multi-core variants.
Memory layout is as follow:
+---------------------------+
| Y-plane 256 bytes x MBs |
+---------------------------+
| UV-plane 128 bytes x MBs |
+---------------------------+
| MV buffer 64 bytes x MBs |
+---------------------------+
| MC sync 32 bytes |
+---------------------------+
Reduce the extra space allocated now that motion vector buffer offset no
longer is based on the extra space.
Only allocate extra space for 64 bytes x MBs of motion vector buffer
and 32 bytes for multi-core sync.
Fixes: a9471e2562 ("media: hantro: Add core bits to support H264 decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A decoded 8-bit 4:2:0 frame need memory for up to 448 bytes per
macroblock and is laid out in memory as follow:
+---------------------------+
| Y-plane 256 bytes x MBs |
+---------------------------+
| UV-plane 128 bytes x MBs |
+---------------------------+
| MV buffer 64 bytes x MBs |
+---------------------------+
The motion vector buffer offset is currently correct for 4:2:0 because
the extra space for motion vectors is overallocated with an extra
64 bytes x MBs.
Wrong offset for both destination and motion vector buffer are used
for the bottom field of field encoded content, wrong offset is
also used for 4:0:0 (monochrome) content.
Fix this by setting the motion vector address to the expected 384 bytes
x MBs offset for 4:2:0 and 256 bytes x MBs offset for 4:0:0 content.
Also use correct destination and motion vector buffer offset
for the bottom field of field encoded content.
While at it also extend the check for 4:0:0 (monochrome) to include an
additional check for High Profile (100).
Fixes: dea0a82f3d ("media: hantro: Add support for H264 decoding on G1")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Commit 953aaa1492 ("media: rockchip/vpu: Prepare things to support decoders")
changed the conditions under S_FMT was allowed for OUTPUT
CAPTURE buffers.
However, and according to the mem-to-mem stateless decoder specification,
in order to support dynamic resolution changes, S_FMT should be allowed
even if OUTPUT buffers have been allocated.
Relax decoder S_FMT restrictions on OUTPUT buffers, allowing a
resolution modification, provided the pixel format stays the same.
Tested on RK3288 platforms using ChromiumOS Video Decode/Encode
Accelerator Unittests.
[hverkuil: fix typo: In other -> In order]
Fixes: 953aaa1492 ("media: rockchip/vpu: Prepare things to support decoders")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: <stable@vger.kernel.org> # for v5.4 and up
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are few variations of 4k resolutions. The biggest one is
4096x2304 which is also supported by HW. It has also nice property that
both width and size are divisible by maximum HEVC CTB size, which is 64.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
H264 decoder needs additional or bigger buffers in order to decode 4k
videos.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mode register also holds information if video width is bigger than 2048
and if it is equal to 4096.
Rework cedrus_engine_enable() to properly signal this properties.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The picture order count table only makes sense for profiles
higher than Baseline. This is confirmed by the H.264 specification
(See 8.2.1 Decoding process for picture order count), which
clarifies how POC are used for features not present in Baseline.
"""
Picture order counts are used to determine initial picture orderings
for reference pictures in the decoding of B slices, to represent picture
order differences between frames or fields for motion vector derivation
in temporal direct mode, for implicit mode weighted prediction in B slices,
and for decoder conformance checking.
"""
As a side note, this change matches various vendors downstream codebases,
including ChromiumOS and IMX VPU libraries.
Fixes: dea0a82f3d ("media: hantro: Add support for H264 decoding on G1")
Signed-off-by: Francois Buergisser <fbuergisser@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: <stable@vger.kernel.org> # for v5.4 and up
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The setting of the motion vectors usage and the setting of motion
vectors address are currently done under different conditions.
When decoding pre-recorded videos, this results of leaving the motion
vectors address unset, resulting in faulty memory accesses. Fix it
by using the same condition everywhere, which matches the profiles
that support motion vectors.
Fixes: dea0a82f3d ("media: hantro: Add support for H264 decoding on G1")
Signed-off-by: Francois Buergisser <fbuergisser@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: <stable@vger.kernel.org> # for v5.4 and up
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
TRM specify supported image size 48x48 to 4096x2304 at step size 16 pixels,
change frmsize max_width/max_height to match TRM at [1].
This patch makes it possible to decode the 4096x2304 sample at [2].
[1] http://www.t-firefly.com/download/firefly-rk3288/docs/TRM/rk3288-chapter-25-video-encoder-decoder-unit-(vcodec).pdf
[2] https://4ksamples.com/puppies-bath-in-4k/
Fixes: 760327930e ("media: hantro: Enable H264 decoding on rk3288")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Scaling list supplied from userspace should be in matrix order
and can be used without applying the inverse scanning process.
The HW also only support 8x8 scaling list for the Y component, indices 0
and 1 in the scaling list supplied from userspace.
Remove reordering and write the scaling matrix in an order expected by
the VPU, also only allocate memory for the two 8x8 lists supported.
Fixes: a9471e2562 ("media: hantro: Add core bits to support H264 decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Documentation now defines the expected order of scaling lists,
change to use correct indices.
Fixes: 6eb9b758e3 ("media: cedrus: Add H264 decoding support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Accessing capture queue structue directly is not safe. Use helpers for
that.
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It seems that for some H264 videos at least one bitstream parsing
trigger must be called in order to be decoded correctly. There is no
explanation why this helps, but it was observed that two sample videos
with this fix are now decoded correctly and there is no regression with
others.
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Currently v4l2-compliance tool returns the following output:
Compliance test for imx-media-captu device /dev/video0:
Driver Info:
Driver name : imx-media-captu
Card type : imx-media-capture
...
The driver name string is limited to 16 characters, so provide
a shorter name so that we can have a better output.
While at it, use the same shorter name for driver and card.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Bool tests don't need comparisons. Issue found by coccicheck.
Signed-off-by: Cristiane Naves <cristianenavescardoso09@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't populate the array 'registers' on the stack but instead make it
static const. Makes the object code smaller by 10 bytes.
Before:
text data bss dec hex filename
20138 5196 128 25462 6376 staging/media/imx/imx7-mipi-csis.o
After:
text data bss dec hex filename
20032 5292 128 25452 636c staging/media/imx/imx7-mipi-csis.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Currently, we can build ipu3 driver code without any
warnings with W=1, so the extra compiler flags in Makefile
and the item in TODO file can be removed.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The data type conversion of the IEFD CU inputs in ipu3 uapi
is ambiguities, add some clarification to help user to
understand this conversion.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch add more details for the resolution change blocks
It can help the developer to understand the main resolution
change blocks in ImgU.
[sakari.ailus@linux.intel.com: Add new files to MAINTAINERS]
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
devm_regulator_get may return an error but mipi_csis_phy_init misses
a check for it.
This may lead to problems when regulator_set_voltage uses the unchecked
pointer.
This patch adds a check for devm_regulator_get to avoid potential risk.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This introduces support for HEVC/H.265 to the Cedrus VPU driver, with
both uni-directional and bi-directional prediction modes supported.
Field-coded (interlaced) pictures, custom quantization matrices and
10-bit output are not supported at this point.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
DIV_ROUND_UP's first argument doesn't need to be wrapped in parenthesis
since that is already being taken care of in the macro's definition.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We need to shift and mask values at different occasions to fill up
cedrus registers. This was done using macros that don't explicitly
treat arguments as unsigned, leading to possibly undefined behavior.
Introduce the SHIFT_AND_MASK_BITS macro and use it where possible.
In cases where it doesn't apply as-is, explicitly cast to unsigned
instead.
This macro should be moved to include/linux/bits.h eventually.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
With recent changes, support for decoding multi-slice frames can be
easily added now.
Signal VPU if current slice is first in frame or not and add information
about first macroblock coordinates.
When frame contains multiple slices and driver works in slice mode, it's
more efficient to hold capture buffer in queue until all slices of a
same frame are decoded.
Add support for that to Cedrus driver by exposing and implementing
V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF capability.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[hverkuil-cisco@xs4all.nl: rewritten to use v4l2_m2m_buf_done_and_job_finish]
[hverkuil-cisco@xs4all.nl: removed unnecessary (u32) cast]
[hverkuil-cisco@xs4all.nl: use new_frame v4l2_m2m_ctx bool]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If a subdevice is unregistered and then registered again without the
driver being removed and re-probed (which will happen when the media
device is removed and re-probed without also removing/re-probing the
subdevice), media_device_register_entity() is called with a non-zero
entity->num_pads, and then the subdevice's .registered callback calls
media_entity_pads_init(). Thus the subdevice's pad objects are added
to the media device pad list twice, causing list corruption.
One way to fix this would be to create media_entity_pads_destroy(),
and call it in the subdevice's .unregistered callback. But calling
media_entity_pads_init() in the .registered callbacks was done for
legacy reasons and is no longer necessary, so move the call to
media_entity_pads_init() into the subdevice's probe functions. This
fixes the duplicate pad obejcts in the media device pad list.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If the CSI is unregistered and then registered again without the
driver being removed and re-probed (which will happen when the media
device is removed and re-probed without also removing/re-probing the
CSI), the result is the kobject error and backtrace "tried to init an
initialized object". This is because the video device is left in an
initialized state after being unregistered, thus the video device's
underlying kobject is also left in an initialized state when the device
is registered again.
Fix this by moving imx_media_capture_device_init() and _remove()
into csi_registered() and csi_unregistered(). This will create a new
un-initialized video device when the CSI is re-registered. Do this for
all the subdevices that register a capture device.
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch fixes a warning by coccicheck:
drivers/staging/media/imx/imx7-mipi-csis.c:973:1-12: WARNING: Use devm_platform_ioremap_resource for state -> regs
Use devm_platform_ioremap_resource helper which wraps platform_get_resource()
and devm_ioremap_resource() together.
Signed-off-by: Jeeeun Evans <jeeeunevans@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
CHECK: Alignment should match open parenthesis
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Now that proper V4L2 pixel formats exist for all 32-bit RGB
permutations, drop support for the poorly defined legacy format
V4L2_PIX_FMT_BGR32.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Step '8.2.4.1 Decoding process for picture numbers' was missing in the
reflist creation logic, leading to invalid P reflists when a
->frame_num wraparound happens.
Fixes: a9471e2562 ("media: hantro: Add core bits to support H264 decoding")
Reported-by: Francois Buergisser <fbuergisser@google.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Francois Buergisser <fbuergisser@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
And use it for all native type comparisons, even if it's not strictly
required. By doing that we make the code more consistent and prevent
from potential incorrect results in case of overflow or when the the
values being compared are both negative.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Francois Buergisser <fbuergisser@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
So it matches the code and the spec.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Francois Buergisser <fbuergisser@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Modify hantro_get_ref() and hantro_h264_get_ref_buf() helpers
to return the buffer DMA address, this makes the code simpler
and at the same time will allow easier enablement of the
post-processing feature.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
It seems all codecs are using a 16x16 size macroblock,
and so it's possible to have just one set of macroblock macros.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds a label to the error path to avoid calling
v4l2_m2m_ctx_init() and kfree(ctx) in two places each.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Initialize the context on open() with valid capture and output
formats. It is good practice to always have valid formats internally.
This solves one vb2 warning in the kernel log where the sizeimage
value of the output format was 0 when requesting buffers, which is
not allowed.
It also simplifies the g_fmt ioctl implementations since they no longer
have to check if a valid format was ever set.
cedrus_prepare_format() now also validates sizeimage for the output
formats, ensuring userspace can't set it to 0 since that would cause
the same vb2 warning.
Finally remove the sizeimage == 0 check in cedrus_try_fmt_vid_out()
since cedrus_prepare_format() will now adjust this value.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If an unsupported pixelformat is passed to try_fmt, then pick
the first valid pixelformat instead. This is more standard V4L2
behavior.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fixes this compliance warning:
$ v4l2-compliance -m0
v4l2-compliance SHA: b514d615166bdc0901a4c71261b87db31e89f464, 32 bits
Compliance test for cedrus device /dev/media0:
Media Driver Info:
Driver name : cedrus
Model : cedrus
Serial :
Bus info :
Media version : 5.3.0
Hardware revision: 0x00000000 (0)
Driver version : 5.3.0
Required ioctls:
warn: v4l2-test-media.cpp(51): empty bus_info
test MEDIA_IOC_DEVICE_INFO: OK
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Here is the big staging/iio driver update for 5.4-rc1.
Lots of churn here, with a few driver/filesystems moving out of staging
finally:
- erofs moved out of staging
- greybus core code moved out of staging
Along with that, a new filesytem has been added:
- extfat
to provide support for those devices requiring that filesystem (i.e.
transfer devices to/from windows systems or printers.)
Other than that, there a number of new IIO drivers, and lots and lots
and lots of staging driver cleanups and minor fixes as people continue
to dig into those for easy changes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIW0g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynJgwCgt22YQdsWRrOuJnZp3xpFq/ZSMWAAn0dAgFf5
SlSTI2nQhbW7jjdShrPR
=Ra09
-----END PGP SIGNATURE-----
Merge tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the big staging/iio driver update for 5.4-rc1.
Lots of churn here, with a few driver/filesystems moving out of
staging finally:
- erofs moved out of staging
- greybus core code moved out of staging
Along with that, a new filesytem has been added:
- extfat
to provide support for those devices requiring that filesystem (i.e.
transfer devices to/from windows systems or printers)
Other than that, there a number of new IIO drivers, and lots and lots
and lots of staging driver cleanups and minor fixes as people continue
to dig into those for easy changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (453 commits)
Staging: gasket: Use temporaries to reduce line length.
Staging: octeon: Avoid several usecases of strcpy
staging: vhciq_core: replace snprintf with scnprintf
staging: wilc1000: avoid twice IRQ handler execution for each single interrupt
staging: wilc1000: remove unused interrupt status handling code
staging: fbtft: make several arrays static const, makes object smaller
staging: rtl8188eu: make two arrays static const, makes object smaller
staging: rtl8723bs: core: Remove Macro "IS_MAC_ADDRESS_BROADCAST"
dt-bindings: anybus-controller: move to staging/ tree
staging: emxx_udc: remove local TRUE/FALSE definition
staging: wilc1000: look for rtc_clk clock
staging: dt-bindings: wilc1000: add optional rtc_clk property
staging: nvec: make use of devm_platform_ioremap_resource
staging: exfat: drop unused function parameter
Staging: exfat: Avoid use of strcpy
staging: exfat: use integer constants
staging: exfat: cleanup spacing for casts
staging: exfat: cleanup spacing for operators
staging: rtl8723bs: hal: remove redundant variable n
staging: pi433: Fix typo in documentation
...
Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As warned by cppcheck:
[drivers/media/dvb-frontends/cx24123.c:434]: (error) Shifting signed 32-bit value by 31 bits is undefined behaviour
[drivers/media/pci/bt8xx/bttv-input.c:87]: (error) Shifting signed 32-bit value by 31 bits is undefined behaviour
[drivers/media/pci/bt8xx/bttv-input.c:98]: (error) Shifting signed 32-bit value by 31 bits is undefined behaviour
...
[drivers/media/v4l2-core/v4l2-ioctl.c:1391]: (error) Shifting signed 32-bit value by 31 bits is undefined behaviour
There are lots of places where we're doing 1 << 31. That's bad,
as, depending on the architecture, this has an undefined behavior.
The BIT() macro is already prepared to handle this, so, let's
just switch all "1 << number" macros by BIT(number) at the header files
with has 1 << 31.
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> # exynos4-is and s3c-camif
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # omap3isp, vsp1, xilinx, wl128x and ipu3
Reviewed-by: Benoit Parrot <bparrot@ti.com> # am437x and ti-vpe
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
RK3328 SoC has the same decoder IP block as RK3399,
lets enable VP8 decoding on RK3328.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a single imx-media mem2mem video device that uses the IPU IC PP
(image converter post processing) task for scaling and colorspace
conversion.
On i.MX6Q/DL SoCs with two IPUs currently only the first IPU is used.
The hardware only supports writing to destination buffers up to
1024x1024 pixels in a single pass, arbitrary sizes can be achieved
by rendering multiple tiles per frame.
[slongerbeam@gmail.com: use ipu_image_convert_adjust(), fix
device_run() error handling, add missing media-device header,
unregister and remove the mem2mem device in error paths in
imx_media_probe_complete() and in imx_media_remove(), updated
for sync subdev registration]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: correct two minor checkpatch issues]
[hverkuil-cisco@xs4all.nl: sparse warning: make imx6_media_probe_complete static]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Now that the generic bits have been added, we can activate H264 decoding
on rk3288.
Signed-off-by: Hertz Wong <hertz.wong@rock-chips.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
