Conflicts:
drivers/net/wireless/ath/ath9k/recv.c
drivers/net/wireless/mwifiex/pcie.c
net/ipv6/sit.c
The SIT driver conflict consists of a bug fix being done by hand
in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper
was created (netdev_alloc_pcpu_stats()) which takes care of this.
The two wireless conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
A single line patch fixing a regression that was introduced in 3.13 in the
reworking of the mxs touch screen and ADC drivers to be interrupt rather
than polling driven. It resulted in a stray double reporting of the release
coordinate in the touch screen driver. The bug lay in the adc side
of the driver which left the statemachine in the wrong state.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=NZzD
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-3.14d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Fourth set of IIO fixes for the 3.14 kernel.
A single line patch fixing a regression that was introduced in 3.13 in the
reworking of the mxs touch screen and ADC drivers to be interrupt rather
than polling driven. It resulted in a stray double reporting of the release
coordinate in the touch screen driver. The bug lay in the adc side
of the driver which left the statemachine in the wrong state.
The D-Link DWA-123 REV D1 with USB ID 2001:3310 uses this driver.
Signed-off-by: Manu Gupta <manugupt1@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Releasing the touchscreen lets the internal statemachine left in a wrong state.
Due to this the release coordinate will be reported again by accident when the next
touchscreen event happens. This change sets up the correct state when waiting
for the next touchscreen event.
This has led to reported issues with calibrating the touchscreen.
Bug was introduced somewhere in the series that began with
18da755de5
Staging/iio/adc/touchscreen/MXS: add proper clock handling
in which the way this driver worked was substantially changed
to be interrupt driven rather than relying on a busy loop.
This was a regression in the 3.13 kernel.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Here is a single android driver fix for 3.14-rc4 that fixes a reported
problem in the binder driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlMJLckACgkQMUfUDdst+ynaDwCfVtgwCfLL//Ck5rsI+dPcNoH4
A4IAnjukxtAABpGDXAezROVpPSvnchRZ
=zWji
-----END PGP SIGNATURE-----
Merge tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fix from Greg KH:
"Here is a single android driver fix for 3.14-rc4 that fixes a reported
problem in the binder driver"
* tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: binder: Fix death notifications
The change (008fa749e0) that moved the
node release code to a separate function broke death notifications in
some cases. When it encountered a reference without a death
notification request, it would skip looking at the remaining
references, and therefore fail to send death notifications for them.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: stable <stable@vger.kernel.org> # 3.10
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
1) kvaser CAN driver has fixed limits of some of it's table, validate
that we won't exceed those limits at probe time. Fix from Olivier
Sobrie.
2) Fix rtl8192ce disabling interrupts for too long, from Olivier
Langlois.
3) Fix botched shift in ath5k driver, from Dan Carpenter.
4) Fix corruption of deferred packets in TIPC, from Erik Hugne.
5) Fix newlink error path in macvlan driver, from Cong Wang.
6) Fix netpoll deadlock in bonding, from Ding Tianhong.
7) Handle GSO packets properly in forwarding path when fragmentation is
necessary on egress, from Florian Westphal.
8) Fix axienet build errors, from Michal Simek.
9) Fix refcounting of ubufs on tx in vhost net driver, from Michael S
Tsirkin.
10) Carrier status isn't set properly in hyperv driver, from Haiyang
Zhang.
11) Missing pci_disable_device() in tulip_remove_one), from Ingo Molnar.
12) AF_PACKET qdisc bypass mode doesn't adhere to driver provided TX
queue selection method. Add a fallback method mechanism to fix this
bug, from Daniel Borkmann.
13) Fix regression in link local route handling on GRE tunnels, from
Nicolas Dichtel.
14) Bonding can assign dup aggregator IDs in some sequences of
configuration, fix by making the allocation counter per-bond instead
of global. From Jiri Bohac.
15) sctp_connectx() needs compat translations, from Daniel Borkmann.
16) Fix of_mdio PHY interrupt parsing, from Ben Dooks
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
MAINTAINERS: add entry for the PHY library
of_mdio: fix phy interrupt passing
net: ethernet: update dependency and help text of mvneta
NET: fec: only enable napi if we are successful
af_packet: remove a stray tab in packet_set_ring()
net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode
ipv4: fix counter in_slow_tot
irtty-sir.c: Do not set_termios() on irtty_close()
bonding: 802.3ad: make aggregator_identifier bond-private
usbnet: remove generic hard_header_len check
gre: add link local route when local addr is any
batman-adv: fix potential kernel paging error for unicast transmissions
batman-adv: avoid double free when orig_node initialization fails
batman-adv: free skb on TVLV parsing success
batman-adv: fix TT CRC computation by ensuring byte order
batman-adv: fix potential orig_node reference leak
batman-adv: avoid potential race condition when adding a new neighbour
batman-adv: properly check pskb_may_pull return value
batman-adv: release vlan object after checking the CRC
batman-adv: fix TT-TVLV parsing on OGM reception
...
Add a new argument for ndo_select_queue() callback that passes a
fallback handler. This gets invoked through netdev_pick_tx();
fallback handler is currently __netdev_pick_tx() as most drivers
invoke this function within their customized implementation in
case for skbs that don't need any special handling. This fallback
handler can then be replaced on other call-sites with different
queue selection methods (e.g. in packet sockets, pktgen etc).
This also has the nice side-effect that __netdev_pick_tx() is
then only invoked from netdev_pick_tx() and export of that
function to modules can be undone.
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are a number (lots, I know) of fixes for staging drivers to resolve
a bunch of reported issues.
The largest patches here is one revert of a patch that is in 3.14-rc1 to
fix reported problems, and a sync of a usb host driver that required
some ARM patches to go in before it could be accepted (which is why it
missed -rc1).
All of these have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlL+h+MACgkQMUfUDdst+ymAigCeNfR2pmw6lcNLokbdUJDOBHhX
tXwAoL4rzSeaRCu1hbTe0q7lXiZDM+yN
=aMFY
-----END PGP SIGNATURE-----
Merge tag 'staging-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a number (lots, I know) of fixes for staging drivers to
resolve a bunch of reported issues.
The largest patches here is one revert of a patch that is in 3.14-rc1
to fix reported problems, and a sync of a usb host driver that
required some ARM patches to go in before it could be accepted (which
is why it missed -rc1)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (56 commits)
staging/rtl8821ae: fix build, depends on MAC80211
iio: max1363: Use devm_regulator_get_optional for optional regulator
iio:accel:bma180: Use modifier instead of index in channel specification
iio: adis16400: Set timestamp as the last element in chan_spec
iio: ak8975: Fix calculation formula for convert micro tesla to gauss unit
staging:iio:ad799x fix typo in ad799x_events[]
iio: mxs-lradc: remove useless scale_available files
iio: mxs-lradc: fix buffer overflow
iio:magnetometer:mag3110: Fix output of decimal digits in show_int_plus_micros()
iio:magnetometer:mag3110: Report busy in _read_raw() / write_raw() when buffer is enabled
wlags49_h2: Fix overflow in wireless_set_essid()
xlr_net: Fix missing trivial allocation check
staging: r8188eu: overflow in rtw_p2p_get_go_device_address()
staging: r8188eu: array overflow in rtw_mp_ioctl_hdl()
staging: r8188eu: Fix typo in USB_DEVICE list
usbip/userspace/libsrc/names.c: memory leak
gpu: ion: dereferencing an ERR_PTR
staging: comedi: usbduxsigma: fix unaligned dereferences
staging: comedi: fix too early cleanup in comedi_auto_config()
staging: android: ion: dummy: fix an error code
...
This patch fixes a typo in ad799x_events[], which caused the error "Failed to register event set".
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
in_voltage8_scale_available and in_voltage9_scale_available are exposed to
userspace but useless as in_voltage8_raw and in_voltage9_raw are not available.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fixes:
drivers/staging/iio/adc/mxs-lradc.c:1556 mxs_lradc_probe() error: buffer
overflow 'iio->channels' 15 <= 15
The reported available scales for in_voltage15 were also wrong.
The realbits lookup is not necessary as all the channels of the LRADC have the
same resolution, use LRADC_RESOLUTION instead.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch prevents the wireless_set_essid() function from overwriting
the last byte of the NetworkName buffer which must be NULL.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The go_devadd_str[] array is two characters too small to hold the
address so we corrupt memory.
I've changed the user space API slightly and I don't have a way to test
if this breaks anything. In the original code we truncated away the
last digit of the address and the NUL terminator so it was already a bit
broken.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MAX_MP_IOCTL_SUBCODE (35) and mp_ioctl_hdl (32 elements) are no longer
in sync. It leads to a bogus pointer dereference.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a typo in the device list that interchanges the vendor and
product codes for one of the entries. This exchange was determined
by noticing that the vendor code is 0x07b8 for Abocom at
http://www.linux-usb.org/usb.ids.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
revised patch
p is freed if NULL.
p is leaked if second calloc fails.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We dereference "heap->task" before checking if it's an ERR_PTR.
Fixes: ea313b5f88 ('gpu: ion: Also shrink memory cached in the deferred free list')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a couple of dereferences such as `*(uint32_t
*)(devpriv->insn_buf + 1)` that are unaligned as `devpriv->insn_buf` is
of type `uint8_t *`. This works on x86 architecture but may not be
supported on other architectures. Call `get_unalign()` to perform the
unaligned dereferences.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`comedi_auto_config()` is usually called from the probe routine of a
low-level comedi driver to allocate and auto-configure a comedi device.
Part of this involves calling the low-level driver's `auto_attach()`
handler, and if that is successful, `comedi_device_postconfig()` tries
to complete the configuration of the comedi device. If either of those
fail, `comedi_device_detach()` is called to clean up, and
`comedi_release_hardware_device()` is called to remove the dynamically
allocated comedi device.
Unfortunately, `comedi_device_detach()` clears the `hw_dev` member of
the `struct comedi_device` (indirectly via `comedi_clear_hw_dev()`), and
that stops `comedi_release_hardware_device()` finding the comedi device
associated with the hardware device, so the comedi device won't be
removed properly.
Since `comedi_release_hardware_device()` also calls
`comedi_device_detach()` (assuming it finds the comedi device associated
with the hardware device), the fix is to remove the direct call to
`comedi_device_detach()` from `comedi_auto_config()` and let the call to
`comedi_release_hardware_device()` take care of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should be returning -ENOMEM here instead of zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The changes introduced in commit 4b1a25f06b ("fix build when
CONFIG_UIDGID_STRICT_TYPE_CHECKS is on") got the UID check the wrong way
around, leading to "Permission denied" when a regular user attempts to
retrieve his quota (lfs quota -u ...) but allowing him to retrieve other
users quota.
Full details at: https://jira.hpdd.intel.com/browse/LU-4530
Cc: Peng Tao <tao.peng@emc.com>
Cc: <stable@vger.kernel.org> # 3.12.x
Cc: <stable@vger.kernel.org> # 3.13.x
Signed-off-by: Cédric Dufour <cedric.dufour@idiap.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a race condition
Assume we have *one* sync_fence object, with *one* sync_pt
which belongs to *one* sync_timeline, given this condition,
sync_timeline->kref will have two counts, one for sync_timeline
(implicit) and another for sync_pt.
Assume following is the situation on CPU
Theead-1 : (Thread which calls sync_timeline_destroy())
-> (some function calls)
-> sync_timeline_destory()
-> sync_timeline_signal() (CPU is inside this
function after putting reference to sync_timeline)
At this time Thread-2 comes and does following
Thread-2 : (fclose on fence fd)
> sync_fence_release() -> because of fclose() on fence object
-> sync_fence_free()
-> sync_pt_free()
-> kref_put(&pt->parent->kref, sync_timeline_free);
-> sync_timeline_free() (CPU is inside this because
this time kref will be zero after _put)
Thread-2 will free sync_timeline object before Thread-1
has finished its work inside sync_timeline_signal.
With this change we signals all sync_pt before putting
reference to sync_timeline object.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org>
[jstultz: minor commit subject tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last value written to a analog output channel is cached in the
private data of this driver for readback.
Currently, the wrong value is cached in the (*insn_write) functions.
The current code stores the data[n] value for readback afer the loop
has written all the values. At this time 'n' points past the end of
the data array.
Fix the functions by using a local variable to hold the data being
written to the analog output channel. This variable is then used
after the loop is complete to store the readback value. The current
value is retrieved before the loop in case no values are actually
written..
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should cap the SSID length at NDIS_802_11_LENGTH_SSID (32) characters
to avoid memory corruption. If the SSID is too long then I have opted
to ignore it instead of truncating it.
We don't need to clear bssid->Ssid.Ssid[0] because this struct is
allocated with rtw_zmalloc()
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error handling code in gdm_usb_probe() misses to deallocate
tx_ and rx_structs and to do usb_put_dev().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If net_dev is NULL memcpy() will Oops.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When attach fails due to unsupported and/or invalid bus speed, the message
vhci_hcd prints out doesn't include any useful information as to what caused
the failure. Change the message to be informative and use usb_speed_string()
to get the right speed string from usb common.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds writes:
It causes an interesting warning for me:
drivers/staging/rtl8821ae/rtl8821ae/dm.c: In function
‘rtl8821ae_dm_clear_txpower_tracking_state’:
drivers/staging/rtl8821ae/rtl8821ae/dm.c:487:31: warning: iteration 2u
invokes undefined behavior [-Waggressive-loop-optimizations]
rtldm->bb_swing_idx_ofdm[p] = rtldm->default_ofdm_index;
^
drivers/staging/rtl8821ae/rtl8821ae/dm.c:485:2: note: containing loop
for (p = RF90_PATH_A; p < MAX_RF_PATH; ++p) {
^
and gcc is entirely correct: that loop iterates from 0 to 3, and does this:
rtldm->bb_swing_idx_ofdm[p] = rtldm->default_ofdm_index;
but the bb_swing_idx_ofdm[] array only has two members. So the last
two iterations will overwrite bb_swing_idx_ofdm_current and the first
entry in bb_swing_idx_ofdm_base[].
Now, the bug does seem to be benign: bb_swing_idx_ofdm_current isn't
actually ever *used* as far as I can tell, and the first entry of
bb_swing_idx_ofdm_base[] will have been written with that same
"rtldm->default_ofdm_index" value.
But gcc is absolutely correct, and that driver needs fixing.
I've pulled it and will let it be because it doesn't seem to be an
issue in practice, but please fix it. The obvious fix would seem to
change the size of "2" to be "MAX_RF_PATH", but I'll abstain from
doing those kinds of changes in the merge when it doesn't seem to
affect the build or functionality).
Reported-By: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extract clocking parameters from the device tree, and remove now dead
code and types.
Signed-off-by: David Daney <david.daney@cavium.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel to userspace communication routines (KUC) allocate
and limit the maximum cs_buf size to CR_MAXSIZE. However this
fails to account for the fact that the buffer is assumed to begin
with a struct kuc_hdr. To allocate and account for that space,
we introduce a new define, KUC_CHANGELOG_MSG_MAXSIZE.
Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/7406
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3587
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CR_MAXSIZE needs to account for an llog_changelog_rec that actually
contains a changelog_ext_rec structure rather than a changelog_rec.
With out doing so, a file size approaching the Linux kernel NAME_MAX
length that is renamed to a size also close to, or at, NAME_MAX will
exceed CR_MAXSIZE and trip an assertion.
Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/6993
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3587
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call to ksocknal_launch_packet might schedule a callback that
might free the just sent message, and so subsequent access to it
via lntmsg->msg_vmflush goes to freed memory.
Instead we'll just remember if we are in the vmflush thread and
only restore if we happened to set mempressure flag.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/8667
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4360
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recent commit 175f5475fb
introduced this compile warning (because vaddr is unsigned long),
so add a cast:
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function ‘kiblnd_kvaddr_to_page’:
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:532:2: warning: passing argument 1 of ‘is_vmalloc_addr’ makes pointer from integer without a cast [enabled by default]
if (is_vmalloc_addr(vaddr)) {
^
In file included from drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h:43:0,
from drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:41:
include/linux/mm.h:336:59: note: expected ‘const void *’ but argument is of type ‘long unsigned int’
static inline int is_vmalloc_addr(const void *x)
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
CC: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other
flags and LACK of __GFP_WAIT flag. To check if caller wanted to perform an
atomic allocation, the code must test __GFP_WAIT flag presence.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add #include <linux/device.h> to fix the following warning seen
with gcc 4.7.3:
In file included from drivers/staging/android/ion/ion_heap.c:26:0:
drivers/staging/android/ion/ion_priv.h:358:21: warning: ‘struct device’ declared inside parameter list [enabled by default]
drivers/staging/android/ion/ion_priv.h:358:21: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The compat ioctl for ION_IOC_FREE currently passes allocation data
instead of the free data. Correct this.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
[jstultz: Folded in a small build fix]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a few bugs in ion_system_heap:
Initialize the list node in the info block.
Don't store size_remaining in a signed long, allocating >2GB
could overflow, resulting in a call to sg_alloc_table with
nents=0 which panics. alloc_largest_available will never
return a block larger than size_remanining, so it can never
go negative.
Limit a single allocation to half of all memory. Prevents a
large allocation from taking down the whole system.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
[jstultz: Minor commit subject tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid holding ashmem_mutex across code that can page fault. Page faults
grab the mmap_sem for the process, which are also held by mmap calls
prior to calling ashmem_mmap, which locks ashmem_mutex. The reversed
order of locking between the two can deadlock.
The calls that can page fault are read() and the ASHMEM_SET_NAME and
ASHMEM_GET_NAME ioctls. Move the code that accesses userspace pages
outside the ashmem_mutex.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
[jstultz: minor commit message tweaks]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before this change, a timeline would only be removed from the timeline
list *after* the sync driver had its release_obj() called. However, the
driver's release_obj() may free resources needed by print_obj().
Although the timeline list is locked when print_obj() is called, it is
not locked when release_obj() is called. If one CPU was in print_obj()
when another was in release_obj(), the print_obj() may make unsafe
accesses.
It is not actually necessary to hold the timeline list lock when calling
release_obj() if the call is made after the timeline is unlinked from
the list, since there is no possibility another thread could be in --
or enter -- print_obj() for that timeline.
This change moves the release_obj() call to after the timeline is
unlinked, preventing the above race from occurring.
Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Alistair Strachan <alistair.strachan@imgtec.com>
[jstultz: minor commit subject tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ION_DUMMY option is bool, and hence this code is either
present or absent. It will never be modular, so using
module_init as an alias for __initcall is rather misleading.
Fix this up now, so that we can relocate module_init from
init.h into module.h in the future. If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.
Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups. As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- it will remain at level 6 in initcall ordering.
Cc: Colin Cross <ccross@android.com>
Cc: Jesse Barker <jesse.barker@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
use ARRAY_SIZE to count number of heaps in static array
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Need add "linux/io.h" to pass compiling under metag architecture with
allmodconfig (which use the default 'virt_to_phys'), the related error:
CC drivers/staging/android/ion/ion_dummy_driver.o
drivers/staging/android/ion/ion_dummy_driver.c: In function 'ion_dummy_init':
drivers/staging/android/ion/ion_dummy_driver.c:81: error: implicit declaration of function 'virt_to_phys'
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
