Enable the LPASS clock controller driver so that audio drivers
can enable, disable, and set rates on their clocks.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
[sboyd@codeaurora.org: Enable 8960 driver too]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Most of these changes are to enable new drivers that have been merged, or
various additions to make defconfigs more useful. There's also a set of patches
trimming down omap2plus kernel size a bit since it is quite large.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ar0W
-----END PGP SIGNATURE-----
Merge tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig changes from Olof Johansson:
"Most of these changes are to enable new drivers that have been merged,
or various additions to make defconfigs more useful. There's also a
set of patches trimming down omap2plus kernel size a bit since it is
quite large"
* tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: config: add DEVTMPFS option by default to keystone config
ARM: multi_v7_defconfig: Enable Exynos5420 Multi-Cluster PM support
ARM: shmobile: Select CONFIG_REGULATOR in defconfig once again
ARM: exynos_defconfig: Enable CONFIG_FHANDLE
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2
ARM: exynos_defconfig: Enable CONFIG_LOCKUP_DETECTOR
ARM: config: enable ARCH_HIP01
ARM: omap2plus_defconfig: Enable OHCI & EHCI HCD support
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform
ARM: imx_v6_v7_defconfig: enable more USB functions
ARM: imx_v6_v7_defconfig: Select CONFIG_FB_MXS
ARM: omap2plus_defconfig: Enable pcf857x
ARM: omap2plus_defconfig: Add NOR flash support
ARM: omap2plus_defconfig: Enable support for davinci_emac
ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY
ARM: efm32: update defconfig
ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig
ARM: multi_v7_defconfig: Enable Hip01 platform
ARM: config: multi_v7: Update it for Keystone defconfig
ARM: shmobile: Enable kzm9g board in multiplatform defconfig
...
New and updated SoC support. Also included are some cleanups where the
platform maintainers hadn't separated cleanups from new developent in
separate branches.
Some of the larger things worth pointing out:
- A large set of changes from Alexandre Belloni and Nicolas Ferre
preparing at91 platforms for multiplatform and cleaning up quite a
bit in the process.
- Removal of CSR's "Marco" SoC platform that never made it out to the
market. We love seeing these since it means the vendor published
support before product was out, which is exactly what we want!
New platforms this release are:
- Conexant Digicolor (CX92755 SoC)
- Hisilicon HiP01 SoC
- CSR/sirf Atlas7 SoC
- ST STiH418 SoC
- Common code changes for Nvidia Tegra132 (64-bit SoC)
We're seeing more and more platforms having a harder time labelling
changes as cleanups vs new development -- which is a good sign that
we've come quite far on the cleanup effort. So over time we might start
combining the cleanup and new-development branches more.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=szd9
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"New and updated SoC support. Also included are some cleanups where
the platform maintainers hadn't separated cleanups from new developent
in separate branches.
Some of the larger things worth pointing out:
- A large set of changes from Alexandre Belloni and Nicolas Ferre
preparing at91 platforms for multiplatform and cleaning up quite a
bit in the process.
- Removal of CSR's "Marco" SoC platform that never made it out to the
market. We love seeing these since it means the vendor published
support before product was out, which is exactly what we want!
New platforms this release are:
- Conexant Digicolor (CX92755 SoC)
- Hisilicon HiP01 SoC
- CSR/sirf Atlas7 SoC
- ST STiH418 SoC
- Common code changes for Nvidia Tegra132 (64-bit SoC)
We're seeing more and more platforms having a harder time labelling
changes as cleanups vs new development -- which is a good sign that
we've come quite far on the cleanup effort. So over time we might
start combining the cleanup and new-development branches more"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
ARM: at91/trivial: unify functions and machine names
ARM: at91: remove at91_dt_initialize and machine init_early()
ARM: at91: change board files into SoC files
ARM: at91: remove at91_boot_soc
ARM: at91: move alternative initial mapping to board-dt-sama5.c
ARM: at91: merge all SOC_AT91SAM9xxx
ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
ARM: digicolor: select syscon and timer
ARM: zynq: Simplify SLCR initialization
ARM: zynq: PM: Fixed simple typo.
ARM: zynq: Setup default gpio number for Xilinx Zynq
ARM: digicolor: add low level debug support
ARM: initial support for Conexant Digicolor CX92755 SoC
ARM: OMAP2+: Add dm816x hwmod support
ARM: OMAP2+: Add clock domain support for dm816x
ARM: OMAP2+: Add board-generic.c entry for ti81xx
ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
ARM: at91: remove unused mach/system_rev.h
ARM: at91: stop using HAVE_AT91_DBGUx
ARM: at91: fix ordering of SRAM and PM initialization
...
This is a good healthy set of various code removals. Total net delta is 8100
lines removed.
Among the larger cleanups are:
- Removal of old Samsung S3C DMA infrastructure by Arnd
- Removal of the non-DT version of the 'lager' board by Magnus Damm
- General stale code removal on OMAP and Davinci by Rickard Strandqvist
- Removal of non-DT support on am3517 platforms by Tony Lindgren
... plus several other cleanups of various platforms across the board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tsjK
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"This is a good healthy set of various code removals. Total net delta
is 8100 lines removed.
Among the larger cleanups are:
- Removal of old Samsung S3C DMA infrastructure by Arnd
- Removal of the non-DT version of the 'lager' board by Magnus Damm
- General stale code removal on OMAP and Davinci by Rickard Strandqvist
- Removal of non-DT support on am3517 platforms by Tony Lindgren
... plus several other cleanups of various platforms across the board"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits)
ARM: sirf: drop redundant function and marco declaration
arm: omap: specify PMUs are for ARMv7 CPUs
arm: shmobile: specify PMUs are for ARMv7 CPUs
arm: iop: specify PMUs are for XScale CPUs
arm: pxa: specify PMUs are for XScale CPUs
arm: realview: specify PMU types
ARM: SAMSUNG: remove unused DMA infrastructure
ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
ARM: davinci: Remove CDCE949 driver
ARM: at91: remove useless at91rm9200_set_type()
ARM: at91: remove useless at91rm9200_dt_initialize()
ARM: at91: move debug-macro.S into the common space
ARM: at91: remove useless at91_sysirq_mask_rtx
ARM: at91: remove useless config MACH_AT91SAM9_DT
ARM: at91: remove useless config MACH_AT91RM9200_DT
ARM: at91: remove unused mach/memory.h
ARM: at91: remove useless header file includes
ARM: at91: remove unneeded header file
rtc: at91/Kconfig: remove useless options
ARM: at91/Documentation: add a README for Atmel SoCs
...
Now that the Armada 38x RTC driver has been pushed, let's enable it in
mvebu_v7_defconfig.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ARM updates from Russell King:
- clang assembly fixes from Ard
- optimisations and cleanups for Aurora L2 cache support
- efficient L2 cache support for secure monitor API on Exynos SoCs
- debug menu cleanup from Daniel Thompson to allow better behaviour for
multiplatform kernels
- StrongARM SA11x0 conversion to irq domains, and pxa_timer
- kprobes updates for older ARM CPUs
- move probes support out of arch/arm/kernel to arch/arm/probes
- add inline asm support for the rbit (reverse bits) instruction
- provide an ARM mode secondary CPU entry point (for Qualcomm CPUs)
- remove the unused ARMv3 user access code
- add driver_override support to AMBA Primecell bus
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (55 commits)
ARM: 8256/1: driver coamba: add device binding path 'driver_override'
ARM: 8301/1: qcom: Use secondary_startup_arm()
ARM: 8302/1: Add a secondary_startup that assumes ARM mode
ARM: 8300/1: teach __asmeq that r11 == fp and r12 == ip
ARM: kprobes: Fix compilation error caused by superfluous '*'
ARM: 8297/1: cache-l2x0: optimize aurora range operations
ARM: 8296/1: cache-l2x0: clean up aurora cache handling
ARM: 8284/1: sa1100: clear RCSR_SMR on resume
ARM: 8283/1: sa1100: collie: clear PWER register on machine init
ARM: 8282/1: sa1100: use handle_domain_irq
ARM: 8281/1: sa1100: move GPIO-related IRQ code to gpio driver
ARM: 8280/1: sa1100: switch to irq_domain_add_simple()
ARM: 8279/1: sa1100: merge both GPIO irqdomains
ARM: 8278/1: sa1100: split irq handling for low GPIOs
ARM: 8291/1: replace magic number with PAGE_SHIFT macro in fixup_pv code
ARM: 8290/1: decompressor: fix a wrong comment
ARM: 8286/1: mm: Fix dma_contiguous_reserve comment
ARM: 8248/1: pm: remove outdated comment
ARM: 8274/1: Fix DEBUG_LL for multi-platform kernels (without PL01X)
ARM: 8273/1: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XX
...
- Enable CONFIG_LOCKUP_DETECTOR
: to detect hard lockup and soft lockup
- Enable PMIC and MUIC
: for battery charger, fuel-gauge, regulators
- Enable CONFIG_FHANDLE
: this is required by systemd
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=U36t
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/defconfig
Merge "Samsung exynos_defconfig updates for v3.20" from Kukjin Kim:
- Enable CONFIG_LOCKUP_DETECTOR
: to detect hard lockup and soft lockup
- Enable PMIC and MUIC
: for battery charger, fuel-gauge, regulators
- Enable CONFIG_FHANDLE
: this is required by systemd
* tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable CONFIG_FHANDLE
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2
ARM: exynos_defconfig: Enable CONFIG_LOCKUP_DETECTOR
ARM: exynos_defconfig: Enable LM90 driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Only use SOC_AT91SAM9 for all the at91sam9 SoCs. It removes all the empty
at91sam9xxx.c SoC files. It also removes the useless at91_init_soc affectation
procedure and its "init" function pointer.
Only the SoC detection and display are kept for the at91sam9:
at91_soc_is_enabled() and at91_boot_soc.map_io() function calls are also
removed.
It enables HAVE_AT91_SMD and HAVE_AT91_UTMI for all the sam9 SoCs but this only
represents 96 bytes of uncompressed kernel code.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: different organization of the patches]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* Select CONFIG_REGULATOR in mach_shmobile defconfig once again
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUyYSiAAoJENfPZGlqN0++FOUP/js8f1R4MsI14U2PlvDojDcz
laI0Uad2uaSh9PK1ibMxoCvHFewmkUxsixO1ei5FJRgRd+Fgahy7wVaaU1cwqHOG
b4PvpQD65bYY7UX8Kac06wOc258LQcYYhzIPn4OlQg85FprpiYLjJFik5qUvyTxH
/igU+eXISJTXGr2l5PvLRAIbetJTYKR+pTElz6DWL9DOQmoBqLyLcg4Yj/puahg9
ZoNQrzXHSs3H6UFF6MIRh+jvZfNlcsY3RxeI7d/vUxgAAP9iI1MPTdA7VLMYE3DU
eCJu1lGyE1mwLKb/slgVbvqo4fvBlr6IXRBrK2X41Sd/KI6Hs3lYtht5z3Uu4xz1
bebghe+YaKYaSvt1K9TibmXYpjEf//PGdLzF4554VMjbX+sShEn54WP3ySxL8SoD
RcnyI2PgLza/aDKp7DILtw5me+PyO1TrTOKA973eU+Uenoz8zQQREAVna7fOtd3L
UwUcrzYI8PnZWjrhJ5JrgxHdp8zwNe4QME2Xz0RTBHN4XI91DC955MtN8ZZDabkR
n6Y62nUdGBd0b4OFmmSJup87w5rP2+AMj+HKQaH1WN6sBh6+cX6fxKfZhDq4MYR2
v1Ckiso3i+U+86xc5L/oX/x1Ecf6G3qCvFEDnj+OOZwfKnT8oKqJQcpnPacLeUuk
N5xkCsoQg9+ST8XduDH/
=joof
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-fixes-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Merge "Renesas ARM Based SoC Defconfig Fixes for v3.20" from Simon Horman:
* Select CONFIG_REGULATOR in mach_shmobile defconfig once again
* tag 'renesas-defconfig-fixes-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Select CONFIG_REGULATOR in defconfig once again
Signed-off-by: Olof Johansson <olof@lixom.net>
When using network driver on keystone and nfs rootfs is used following
error displayed and device halts.
Missing devtmpfs, which is required for udev to run
Halting...
Add the DEVTMPFS option by default to fix this
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Exynos5420 cluster power management support allowing Exynos
5420/5422/5800 machines to power up and down the secondary CPUs.
Without this option enabled, the secondary CPUs are not brought
up on boot and the following error is shown:
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x40938e90 - 0x40938f28
ARM CCI driver probed
CPU1: failed to boot: -38
CPU2: failed to boot: -38
CPU3: failed to boot: -38
CPU4: failed to boot: -38
CPU5: failed to boot: -38
CPU6: failed to boot: -38
CPU7: failed to boot: -38
Brought up 1 CPUs
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
arch/arm/boot/dts/imx6sx-sdb.dts
net/sched/cls_bpf.c
Two simple sets of overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Defconfig changes for both sunxi and multi_v7 defconfig in order to add the
cpufreq-related drivers and the PMIC drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9l0R
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Merge "Allwinner defconfig changes for 3.20" from Maxime Ripard:
Defconfig changes for both sunxi and multi_v7 defconfig in order to add the
cpufreq-related drivers and the PMIC drivers.
* tag 'sunxi-defconfig-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Add AXP20x support multi_v7_defconfig
ARM: sunxi: Add AXP20x support in defconfig
ARM: multi_v7_defconfig: Enable TOUCHSCREEN_SUN4I, CPU_THERMAL
ARM: sunxi_defconfig: Enable TOUCHSCREEN_SUN4I, CPUFREQ_DT, CPU_THERMAL
Signed-off-by: Olof Johansson <olof@lixom.net>
eb4513482d
(ARM: shmobile: Enable kzm9g board in multiplatform defconfig)
dropped CONFIG_REGULATOR from shmobile_defconfig as it was
generated using a tree where CONFIG_REGULATOR is indirectly
selected by ARCH_SH73A0.
ARCH_SH73A0 is not queued up for v3.20 and thus, baring unforeseen
changes, CONFIG_REGULATOR will not be selected by shmobile_defconfig
in that release. This causes at least SDHI to stop working on
R-Car Gen2 SoCs.
Reported-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms: minimal patch targeted as a fix]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
CONFIG_FHANDLE is required by systemd, which is the default init system
in more and more distributions. So lets enable it for Exynos as well
(it's already enabled in multi_v7_defconfig)
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable drivers for PMICs and MUICs present on Exynos-based devices:
- max14577: charger, extcon, fuel gauge (max17040), regulator,
used on: Gear 1, Gear 2,
- max77693: charger, extcon, fuel gauge (max17042),
used on: Trats2,
This allows full usage of charging stack on these devices along with
extcon connector.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
On enabling CONFIG_LOCKUP_DETECTOR the kernel to act as a watchdog
to detect hard and soft lockups. Enabling CONFIG_LOCKUP_DETECTOR
don't introduce much overhead on exyons SOC.
(CONFIG_LOCKUP_DETECTOR is enabled on multi_v7_defconfig.)
Tested on Exynos5422 ODROID XU3 board.
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Anand Moon <moon.linux@yahoo.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This is merely a regeneration of the default configuration to get rid of
two symbols that are now enabled by default or removed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lOBJ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.20-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
Merge "ARM: tegra: Default configuration changes for v3.20" from Thierry Reding:
This is merely a regeneration of the default configuration to get rid of
two symbols that are now enabled by default or removed.
* tag 'tegra-for-3.20-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Regenerate defconfig based on v3.19-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
- Eneable FB_MXS, SPI_FSL_QUADSPI, POWER_RESET_SYSCON and module build
for a bunch of USB functions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUwg+sAAoJEFBXWFqHsHzO6kQH/2LKpsTaWtmySneJeSB4rSHJ
3rdqaAYP+cPp6ARosqyWl30qzUDYCmAPUFXA4yuIaw11pDiMECiim98OdxmaF7Aa
c19NceceLHTtDMEwmmLRcA0+oMRydnKBcSfFmHlCmTmYjepKTDjUKXAYi5WHfQJX
iFohDoIpTBGS9Nds7Po1kXV3pB3kCUt6gL5QeT6KRDGA+HuY1v+arSPzCpCY/qs2
QOck4IKLMM0tUkgmWZW6LjyOa02Dw/YCgAvf+nrCnvzwuJ/ot0kRNbnu/Cm2G5p5
Ohja2bWuKyp92SUUOsU3d4nUpO7e0LyE9gaa3ETIDJNUfKslSwGgUrS2ZSaQTyQ=
=tCLt
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Merge "ARM: imx: defconfig update for 3.20" from Shawn Guo:
The i.MX defconfig update for 3.20:
- Eneable FB_MXS, SPI_FSL_QUADSPI, POWER_RESET_SYSCON and module build
for a bunch of USB functions
* tag 'imx-defconfig-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: enable more USB functions
ARM: imx_v6_v7_defconfig: Select CONFIG_FB_MXS
ARM: imx_v6_v7_defconfig: Select SPI_FSL_QUADSPI by default
ARM: imx_v6_v7_defconfig: add POWER_RESET_SYSCON
Signed-off-by: Olof Johansson <olof@lixom.net>
and to add few more drivers found on various boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=v4Ba
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.20/defconfig-modular' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap defconfig changes for v3.20" from Tony Lindgren:
Defconfig changes for omap2plus_defconfig to make it more modular,
and to add few more drivers found on various boards.
* tag 'omap-for-v3.20/defconfig-modular' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable OHCI & EHCI HCD support
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform
ARM: omap2plus_defconfig: Enable pcf857x
ARM: omap2plus_defconfig: Add NOR flash support
ARM: omap2plus_defconfig: Enable support for davinci_emac
ARM: omap2plus_defconfig: enable TPS65218 power button
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable kzm9g board in multiplatform defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QtoG
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig2-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Merge "Second Round of Renesas ARM Based SoC Defconfig Updates for v3.20" from
Simon Horman:
Second Round of Renesas ARM Based SoC Defconfig Updates for v3.20
* Enable kzm9g board in multiplatform defconfig
* tag 'renesas-defconfig2-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable kzm9g board in multiplatform defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Make hip01 share the hisi_defconfig.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
All defconfigs touched by this patch already enable DEBUG_LL and by
default DEBUG_LL_UART_NONE will be selected. This causes no issues
today because due to some back compatibility magic we eventually need
to remove it is not actually honoured. Nevertheless DEBUG_LL_UART_8250
is the right value for these platforms and should be set in the config
files.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enable CONFIG_USB_EHCI_HCD and CONFIG_USB_OHCI_HCD to get USB supports
with omap2plus_defconfig.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
BeagleBoard-X15 has options such as rtc, fan that need to be functional
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
USB Ethernet function at host mode
USB Media function(webcam) at host mode
USB Audio function at host mode
USB Serial function at host mode
USB EHSET driver at host mode (for OTG & EH Certification test)
Several USB Gadget functions:
- Configfs
- NCM
- Zero (used for test)
- Gadgetfs
- Serial
Above functions are built as module.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
CONFIG_FB_MXS is the LCD driver for mx6solo-lite and mx6solox.
Enable it by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
- we remove DEBUG_LL from sama5 defconfig as all SoC are not compatible
- enable ISI and selected sensors
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUt/NQAAoJEAf03oE53VmQ0TsH+gOpauMKCPBXj4keev84Ec9k
WKq/6FhZb0YqNt0kfaaW8MIDzb2YVZMPgaEJ3UgN/hWfTACi3llIxe3IzwyBkyWS
c2GTpnAjt9RZm54cJ+hWhnOq5q2NX+JoQ0sB/bRfhQSCQqtWw8kNZuc4wYRe838A
q9hAJBjD221TiNjJgAgD9/EAXB/aBkos+hAky3pxfn6UcqrhaQKmQN70w2SOn9WV
D+I7DV+Njf4BtnVZoHX3c0ur3QDKOyFoyKe1e6DbgoOHNvDoJjbl622nsF955QMB
wRKj2gD/PIrI4k5S/4aQNdBwvCGJW03tpRxvIuE3rlQMO+sXhbG4AbQ0PoR6bl8=
=YfYF
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/defconfig
Merge "at91: defconfig for 3.20 #1" from Nicolas Ferre:
First batch of defconfig update for 3.20:
- we remove DEBUG_LL from sama5 defconfig as all SoC are not compatible
- enable ISI and selected sensors
* tag 'at91-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig
ARM: at91/config: sama5: Remove DEBUG_LL
Signed-off-by: Olof Johansson <olof@lixom.net>
We have pcf857x at least several boards. Let's enable it
as a loadable module.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some omaps have NOR flash as the rootfs but we're missing
physmap and physmap_of to properly support it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We have this on at least 3517-evm and dm8168-evm. Let's
enable davinci_emac so those can be booted with NFSroot.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Merge "omap fixes against v3.19-rc1" from Tony Lindgren:
Fixes for omaps mostly to deal with dra7 timer issues
and hypervisor mode. The other fixes are minor fixes for
various boards. The summary of the fixes is:
- Fix real-time counter rate typos for some frequencies
- Fix counter frequency drift for am572x
- Fix booting of secondary CPU in HYP mode
- Fix n900 board name for legacy user space
- Fix cpufreq in omap2plus_defconfig after Kconfig change
- Fix dra7 qspi partitions
And also, let's re-enable smc91x on some n900 boards that
we have sitting in a few test boot systems after the boot
loader dependencies got fixed.
* tag 'omap-for-v3.19/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Revert disabling of smc91x for n900
ARM: dts: dra7-evm: fix qspi device tree partition size
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
ARM: OMAP2+: Fix n900 board name for legacy user space
ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode
ARM: dra7xx: Fix counter frequency drift for AM572x errata i856
ARM: omap5/dra7xx: Fix frequency typos
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable i2c driver for efm32. The other two changes are just results from
oldconfig after commits
- 08b964ff3c (ARM: 8198/1: make kuser helpers depend on MMU)
- 8357041a69 (of: remove /proc/device-tree)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable Hip01 platform support for multi_v7_defconfig.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The sama5_defconfig can be used both on the sama5d3 and the sama5d4.
Enabling DEBUG_LL is an issue though, since it will by default use the kernel
addresses for the sama5d3 DBGU UART, that is located at a different address on
the sama5d4.
Remove this from the defconfig.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* Remove legacy r8a7790 SoC and its Lager board code
* Update serial port names on koelsch and lager boards
* Remove console bootargs parameter from lager DT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=prxC
-----END PGP SIGNATURE-----
Merge tag 'renesas-lager-board-removal-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
Merge "Renesas ARM Based SoC Lager Board Removal for v3.20" from Simon Horman:
"The serial port rename changes are not strictly related to lager board
removal from a feature point of view. But the lager portion of this change
depends on board removal to avoid a regression of booting using that code,
And thus it seems to make sense to put here. And it seems best to put the
koelsch and lager serial port rename changes in the same branch.
Likewise the removal of bootargs from lager DT depends on removing lager
board code to avoid a regression when using it and thus I have included
it in the same branch."
* Remove legacy r8a7790 SoC and its Lager board code
* Update serial port names on koelsch and lager boards
* Remove console bootargs parameter from lager DT
* tag 'renesas-lager-board-removal-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: lager dts: Drop console= bootargs parameter
ARM: shmobile: koelsch: Rename SCIF[01] serial ports to ttySC[01]
ARM: shmobile: lager: Rename SCIFA[01] serial ports to ttySC[01]
ARM: shmobile: r8a7790: Remove legacy code
ARM: shmobile: lager: Remove legacy board support
ARM: shmobile: lager-reference: DTS-only board support
Signed-off-by: Olof Johansson <olof@lixom.net>
multi_v7_defconfig has it as Y already, so build it in here, too, for
consistency, and therefore build in HWMON as well.
Signed-off-by: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Many Exynos devices have a display panel. Most of them just have
a simple panel while others have more complex configurations that
requires an embedded DisplayPort (eDP) to LVDS bridges.
This patch enables the following features to be built in the kernel
image to support both setups:
- Direct Rendering Manager (DRM)
- DRM bridge registration and lookup framework
- Parade ps8622/ps8625 eDP/LVDS bridge
- NXP ptn3460 eDP/LVDS bridge
- Exynos Fully Interactive Mobile Display controller (FIMD)
- Panel registration and lookup framework
- Simple panels
- Backlight & LCD device support
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This patch enables the picoPHY usb phy which is used by
the usb2 and usb3 host controllers when controlling usb2/1.1
devices. It is found in stih407 family SoC's from STMicroelectronics.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
