The 9p code for some reason used to initialize variables outside of the
declaration, e.g. instead of just initializing the variable like this:
int retval = 0
We would be doing this:
int retval;
retval = 0;
This is perfectly fine and the compiler will just optimize dead stores
anyway, but scan-build seems to think this is a problem and there are
many of these warnings making the output of scan-build full of such
warnings:
fs/9p/vfs_inode.c:916:2: warning: Value stored to 'retval' is never read [deadcode.DeadStores]
retval = 0;
^ ~
I have no strong opinion here, but if we want to regularly run
scan-build we should fix these just to silence the messages.
I've confirmed these all are indeed ok to remove.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Fix the following scan-build warning:
net/9p/trans_virtio.c:504:3: warning: Value stored to 'in' is never read [deadcode.DeadStores]
in += pack_sg_list_p(chan->sg, out + in, VIRTQUEUE_NUM,
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I'm honestly not 100% sure about this one; I'm tempted to think we
could (should?) just check the return value of pack_sg_list_p to skip
the in_sgs++ and setting sgs[] if it didn't process anything, but I'm
not sure it should ever happen so this is probably fine as is.
Just removing the assignment at least makes it clear the return value
isn't used, so it's an improvement in terms of readability.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Similarly to the previous patch: offs can be used in handle_rerrors
without initializing on small payloads; in this case handle_rerrors will
not use it because of the size check, but it doesn't hurt to make sure
it is zero to please scan-build.
This fixes the following warning:
net/9p/trans_virtio.c:539:3: warning: 3rd function call argument is an uninitialized value [core.CallAndMessage]
handle_rerror(req, in_hdr_len, offs, in_pages);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
handle_rerror can dereference the pages pointer, but it is not
necessarily set for small payloads.
In practice these should be filtered out by the size check, but
might as well double-check explicitly.
This fixes the following scan-build warnings:
net/9p/trans_virtio.c:401:24: warning: Dereference of null pointer [core.NullDereference]
memcpy_from_page(to, *pages++, offs, n);
^~~~~~~~
net/9p/trans_virtio.c:406:23: warning: Dereference of null pointer (loaded from variable 'pages') [core.NullDereference]
memcpy_from_page(to, *pages, offs, size);
^~~~~~
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
This pull request includes a number of patches that didn't quite make
the cut last merge window while we addressed some outstanding issues
and review comments. It includes some new caching modes for those that
only want readahead caches and reworks how we do writeback caching so we
are not keeping extra references around which both causes performance problems
and uses lots of additional resources on the server.
It also includes a new flag to force disabling of xattrs which can also
cause major performance issues, particularly if the underlying filesystem
on the server doesn't support them.
Finally it adds a couple of additional mount options to better support
directio and enabling caches when the server doesn't support qid.version.
There was one late-breaking bug report that has also been included as its
own patch where I forgot to propagate an embarassing bit-logic fix to the
various variations of open. Since that was only added to for-next a week
ago, if you would like to not include it, I can include it in the first
round of fixes for -rc2.
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qXIe
-----END PGP SIGNATURE-----
Merge tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p updates from Eric Van Hensbergen:
"This includes a number of patches that didn't quite make the cut last
merge window while we addressed some outstanding issues and review
comments. It includes some new caching modes for those that only want
readahead caches and reworks how we do writeback caching so we are not
keeping extra references around which both causes performance problems
and uses lots of additional resources on the server.
It also includes a new flag to force disabling of xattrs which can
also cause major performance issues, particularly if the underlying
filesystem on the server doesn't support them.
Finally it adds a couple of additional mount options to better support
directio and enabling caches when the server doesn't support
qid.version.
There was one late-breaking bug report that has also been included as
its own patch where I forgot to propagate an embarassing bit-logic fix
to the various variations of open"
* tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: Fix bit operation logic error
fs/9p: Rework cache modes and add new options to Documentation
fs/9p: remove writeback fid and fix per-file modes
fs/9p: Add new mount modes
9p: Add additional debug flags and open modes
fs/9p: allow disable of xattr support on mount
fs/9p: Remove unnecessary superblock flags
fs/9p: Consolidate file operations and add readahead and writeback
9pfs can run over assorted transports, so it doesn't have an INET
dependency. Drop it and remove the includes of linux/inet.h.
NET_9P_FD/trans_fd.o builds without INET or UNIX and is usable over
plain file descriptors. However, tcp and unix functionality is still
built and would generate runtime failures if used. Add imply INET and
UNIX to NET_9P_FD, so functionality is enabled by default but can still
be explicitly disabled.
This allows configuring 9pfs over Xen with INET and UNIX disabled.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring
to init priv->rings and bound &ring->work with p9_xen_response.
When it calls xen_9pfs_front_event_handler to handle IRQ requests,
it will finally call schedule_work to start the work.
When we call xen_9pfs_front_remove to remove the driver, there
may be a sequence as follows:
Fix it by finishing the work before cleanup in xen_9pfs_front_free.
Note that, this bug is found by static analysis, which might be
false positive.
CPU0 CPU1
|p9_xen_response
xen_9pfs_front_remove|
xen_9pfs_front_free|
kfree(priv) |
//free priv |
|p9_tag_lookup
|//use priv->client
Fixes: 71ebd71921 ("xen/9pfs: connect to the backend")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Add some additional debug flags to assist with debugging
cache changes. Also add some additional open modes so we
can track cache state in fids more directly.
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Here is the 9p patches for the 6.3 merge window combining
the tested and reviewed patches from both Dominique's
for-next tree and my for-next tree. Most of these
patches have been in for-next since December with only
some reword in the description:
- some fixes and cleanup setting up for a larger set
of performance patches I've been working on
- a contributed fixes relating to 9p/rdma
- some contributed fixes relating to 9p/xen
I've marked this as part 1, I'm not sure I'll be
submitting part 2. There were several performance
patches that I wanted to get in, but the revisions
after review only went out last week so while they
have been tested, I haven't received reviews on the
revisions.
Its been about a decade since I've submitted a pull
request, sorry if I messed anything up.
-eric
-----BEGIN PGP SIGNATURE-----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=Cvvf
-----END PGP SIGNATURE-----
Merge tag '9p-6.3-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p updates from Eric Van Hensbergen:
- some fixes and cleanup setting up for a larger set of performance
patches I've been working on
- a contributed fixes relating to 9p/rdma
- some contributed fixes relating to 9p/xen
* tag '9p-6.3-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: fix error reporting in v9fs_dir_release
net/9p: fix bug in client create for .L
9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
9p/xen: fix connection sequence
9p/xen: fix version parsing
fs/9p: Expand setup of writeback cache to all levels
net/9p: Adjust maximum MSIZE to account for p9 header
We are supposed to set fid->mode to reflect the flags
that were used to open the file. We were actually setting
it to the creation mode which is the default perms of the
file not the flags the file was opened with.
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
When down_interruptible() or ib_post_send() failed in rdma_request(),
receive dma buffer is not unmapped. Add unmap action to error path.
Also if ib_post_recv() failed in post_recv(), dma buffer is not unmapped.
Add unmap action to error path.
Link: https://lkml.kernel.org/r/20230104020424.611926-1-shaozhengchao@huawei.com
Fixes: fc79d4b104 ("9p: rdma: RDMA Transport Support for 9P")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Today the connection sequence of the Xen 9pfs frontend doesn't match
the documented sequence. It can work reliably only for a PV 9pfs device
having been added at boot time already, as the frontend is not waiting
for the backend to have set its state to "XenbusStateInitWait" before
reading the backend properties from Xenstore.
Fix that by following the documented sequence [1] (the documentation
has a bug, so the reference is for the patch fixing that).
[1]: https://lore.kernel.org/xen-devel/20230130090937.31623-1-jgross@suse.com/T/#u
Link: https://lkml.kernel.org/r/20230130113036.7087-3-jgross@suse.com
Fixes: 868eb12273 ("xen/9pfs: introduce Xen 9pfs transport driver")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
When connecting the Xen 9pfs frontend to the backend, the "versions"
Xenstore entry written by the backend is parsed in a wrong way.
The "versions" entry is defined to contain the versions supported by
the backend separated by commas (e.g. "1,2"). Today only version "1"
is defined. Unfortunately the frontend doesn't look for "1" being
listed in the entry, but it is expecting the entry to have the value
"1".
This will result in failure as soon as the backend will support e.g.
versions "1" and "2".
Fix that by scanning the entry correctly.
Link: https://lkml.kernel.org/r/20230130113036.7087-2-jgross@suse.com
Fixes: 71ebd71921 ("xen/9pfs: connect to the backend")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Add maximum p9 header size to MSIZE to make sure we can
have page aligned data.
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCY76ohgAKCRCAXGG7T9hj
vo8fAP0XJ94B7asqcN4W3EyeyfqxUf1eZvmWRhrbKqpLnmHLaQEA/uJBkXL49Zj7
TTcbxR1coJ/hPwhtmONU4TNtCZ+RXw0=
=2Ib5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two cleanup patches
- a fix of a memory leak in the Xen pvfront driver
- a fix of a locking issue in the Xen hypervisor console driver
* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: free active map buffer on pvcalls_front_free_map
hvc/xen: lock console list traversal
x86/xen: Remove the unused function p2m_index()
xen: make remove callback of xen driver void returned
- improve p9_check_errors to check buffer size instead of msize when possible
(e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
-----BEGIN PGP SIGNATURE-----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=xLkl
-----END PGP SIGNATURE-----
Merge tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- improve p9_check_errors to check buffer size instead of msize when
possible (e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
* tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux:
9p/client: fix data race on req->status
net/9p: fix response size check in p9_check_errors()
net/9p: distinguish zero-copy requests
9p/xen: do not memcpy header into req->rc
9p: set req refcount to zero to avoid uninitialized usage
9p/net: Remove unneeded idr.h #include
9p/fs: Remove unneeded idr.h #include
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag. The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.
The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code. I believe this problem to
be much more pervasive than reports to the community may indicate.
Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false. Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.
CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit fc7a6209d5 ("bus: Make remove callback return void")
forces bus_type::remove be void-returned, it doesn't make much sense for
any bus based driver implementing remove callbalk to return non-void to
its caller.
This change is for xen bus based drivers.
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Juergen Gross <jgross@suse.com>
KCSAN reported a race between writing req->status in p9_client_cb and
accessing it in p9_client_rpc's wait_event.
Accesses to req itself is protected by the data barrier (writing req
fields, write barrier, writing status // reading status, read barrier,
reading other req fields), but status accesses themselves apparently
also must be annotated properly with WRITE_ONCE/READ_ONCE when we
access it without locks.
Follows:
- error paths writing status in various threads all can notify
p9_client_rpc, so these all also need WRITE_ONCE
- there's a similar read loop in trans_virtio for zc case that also
needs READ_ONCE
- other reads in trans_fd should be protected by the trans_fd lock and
lists state machine, as corresponding writers all are within trans_fd
and should be under the same lock. If KCSAN complains on them we likely
will have something else to fix as well, so it's better to leave them
unmarked and look again if required.
Link: https://lkml.kernel.org/r/20221205124756.426350-1-asmadeus@codewreck.org
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
Since commit 60ece0833b ("net/9p: allocate appropriate reduced message
buffers") it is no longer appropriate to check server's response size
against msize. Check against the previously allocated buffer capacity
instead.
- Omit this size check entirely for zero-copy messages, as those always
allocate 4k (P9_ZC_HDR_SZ) linear buffers which are not used for actual
payload and can be much bigger than 4k.
- Replace p9_debug() by pr_err() to make sure this message is always
printed in case this error is triggered.
- Add 9p message type to error message to ease investigation.
Link: https://lkml.kernel.org/r/e0edec84b1c80119ae937ce854b4f5f6dbe2d08c.1669144861.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Add boolean `zc` member to struct p9_fcall to distinguish zero-copy
messages (not using the linear `sdata` buffer for message payload) from
regular messages (which do copy message payload to `sdata` before being
further processed).
This new member is appended to end of structure to avoid inserting huge
padding in generated layout.
Link: https://lkml.kernel.org/r/8f2a5c12a446c3b544da64e0b1550e1fb2d6f972.1669144861.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
while 'h' is packed and can be assumed to match the request payload,
req->rc is a struct p9_fcall which is not packed and that memcpy
could be wrong.
Fix this by copying each fields individually instead.
Reported-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Suggested-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.22.394.2211211454540.1049131@ubuntu-linux-20-04-desktop
Link: https://lkml.kernel.org/r/20221122001025.119121-1-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
When a new request is allocated, the refcount will be zero if it is
reused, but if the request is newly allocated from slab, it is not fully
initialized before being added to idr.
If the p9_read_work got a response before the refcount initiated. It will
use a uninitialized req, which will result in a bad request data struct.
Here is the logs from syzbot.
Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00
0x00 0x00 . . . . . . . . ] (in kfence-#110):
p9_fcall_fini net/9p/client.c:248 [inline]
p9_req_put net/9p/client.c:396 [inline]
p9_req_put+0x208/0x250 net/9p/client.c:390
p9_client_walk+0x247/0x540 net/9p/client.c:1165
clone_fid fs/9p/fid.h:21 [inline]
v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118
v9fs_xattr_set fs/9p/xattr.c:100 [inline]
v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159
__vfs_setxattr+0x119/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277
vfs_setxattr+0x143/0x340 fs/xattr.c:309
setxattr+0x146/0x160 fs/xattr.c:617
path_setxattr+0x197/0x1c0 fs/xattr.c:636
__do_sys_setxattr fs/xattr.c:652 [inline]
__se_sys_setxattr fs/xattr.c:648 [inline]
__ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Below is a similar scenario, the scenario in the syzbot log looks more
complicated than this one, but this patch can fix it.
T21124 p9_read_work
======================== second trans =================================
p9_client_walk
p9_client_rpc
p9_client_prepare_req
p9_tag_alloc
req = kmem_cache_alloc(p9_req_cache, GFP_NOFS);
tag = idr_alloc
<< preempted >>
req->tc.tag = tag;
/* req->[refcount/tag] == uninitialized */
m->rreq = p9_tag_lookup(m->client, m->rc.tag);
/* increments uninitalized refcount */
refcount_set(&req->refcount, 2);
/* cb drops one ref */
p9_client_cb(req)
/* reader thread drops its ref:
request is incorrectly freed */
p9_req_put(req)
/* use after free and ref underflow */
p9_req_put(req)
To fix it, we can initialize the refcount to zero before add to idr.
Link: https://lkml.kernel.org/r/20221201033310.18589-1-schspa@gmail.com
Cc: stable@vger.kernel.org # 6.0+ due to 6cda12864c ("9p: Drop kref usage")
Fixes: 728356dede ("9p: Add refcount to p9_req_t")
Reported-by: syzbot+8f1060e2aaf8ca55220b@syzkaller.appspotmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0Lnw
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and wifi.
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF"
* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
MAINTAINERS: Update maintainer list for chelsio drivers
ionic: update MAINTAINERS entry
sctp: fix memory leak in sctp_stream_outq_migrate()
packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
net/mlx5: Lag, Fix for loop when checking lag
Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
net: tun: Fix use-after-free in tun_detach()
net: mdiobus: fix unbalanced node reference count
net: hsr: Fix potential use-after-free
tipc: re-fetch skb cb after tipc_msg_validate
mptcp: fix sleep in atomic at close time
mptcp: don't orphan ssk in mptcp_close()
dsa: lan9303: Correct stat name
ipv4: Fix route deletion when nexthop info is not specified
net: wwan: iosm: fix incorrect skb length
net: wwan: iosm: fix crash in peek throughput test
net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
net: wwan: iosm: fix kernel test robot reported error
...
Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.
This patch adds sock_release() to fix the leak issue.
Fixes: 6b18662e23 ("9p connect fixes")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
trans_xen did not check the data fits into the buffer before copying
from the xen ring, but we probably should.
Add a check that just skips the request and return an error to
userspace if it did not fit
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Link: https://lkml.kernel.org/r/20221118135542.63400-1-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Cleanup hardcoded header sizes to use P9_HDRSZ instead of '7'
Link: https://lkml.kernel.org/r/20221117091159.31533-4-guozihua@huawei.com
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: commit message adjusted to make sense after offset size
adjustment got removed]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
This error was reported while fuzzing:
BUG: KASAN: slab-out-of-bounds in _copy_to_iter+0xd35/0x1190
Write of size 4043 at addr ffff888008724eb1 by task kworker/1:1/24
CPU: 1 PID: 24 Comm: kworker/1:1 Not tainted 6.1.0-rc5-00002-g1adf73218daa-dirty #223
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Workqueue: events p9_read_work
Call Trace:
<TASK>
dump_stack_lvl+0x4c/0x64
print_report+0x178/0x4b0
kasan_report+0xae/0x130
kasan_check_range+0x179/0x1e0
memcpy+0x38/0x60
_copy_to_iter+0xd35/0x1190
copy_page_to_iter+0x1d5/0xb00
pipe_read+0x3a1/0xd90
__kernel_read+0x2a5/0x760
kernel_read+0x47/0x60
p9_read_work+0x463/0x780
process_one_work+0x91d/0x1300
worker_thread+0x8c/0x1210
kthread+0x280/0x330
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 457:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7e/0x90
__kmalloc+0x59/0x140
p9_fcall_init.isra.11+0x5d/0x1c0
p9_tag_alloc+0x251/0x550
p9_client_prepare_req+0x162/0x350
p9_client_rpc+0x18d/0xa90
p9_client_create+0x670/0x14e0
v9fs_session_init+0x1fd/0x14f0
v9fs_mount+0xd7/0xaf0
legacy_get_tree+0xf3/0x1f0
vfs_get_tree+0x86/0x2c0
path_mount+0x885/0x1940
do_mount+0xec/0x100
__x64_sys_mount+0x1a0/0x1e0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This BUG pops up when trying to reproduce
https://syzkaller.appspot.com/bug?id=6c7cd46c7bdd0e86f95d26ec3153208ad186f9fa
The callstack is different but the issue is valid and re-producable with
the same re-producer in the link.
The root cause of this issue is that we check the size of the message
received against the msize of the client in p9_read_work. However, it
turns out that capacity is no longer consistent with msize. Thus,
the message size should be checked against sdata capacity.
As the msize is non-consistant with the capacity of the tag and as we
are now checking message size against capacity directly, there is no
point checking message size against msize. So remove it.
Link: https://lkml.kernel.org/r/20221117091159.31533-2-guozihua@huawei.com
Link: https://lkml.kernel.org/r/20221117091159.31533-3-guozihua@huawei.com
Reported-by: syzbot+0f89bd13eaceccc0e126@syzkaller.appspotmail.com
Fixes: 60ece0833b ("net/9p: allocate appropriate reduced message buffers")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: squash patches 1 & 2 and fix size including header part]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Syz reported the following issue:
kernel BUG at lib/list_debug.c:53!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:__list_del_entry_valid.cold+0x5c/0x72
Call Trace:
<TASK>
p9_fd_cancel+0xb1/0x270
p9_client_rpc+0x8ea/0xba0
p9_client_create+0x9c0/0xed0
v9fs_session_init+0x1e0/0x1620
v9fs_mount+0xba/0xb80
legacy_get_tree+0x103/0x200
vfs_get_tree+0x89/0x2d0
path_mount+0x4c0/0x1ac0
__x64_sys_mount+0x33b/0x430
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
The process is as follows:
Thread A: Thread B:
p9_poll_workfn() p9_client_create()
... ...
p9_conn_cancel() p9_fd_cancel()
list_del() ...
... list_del() //list_del
corruption
There is no lock protection when deleting list in p9_conn_cancel(). After
deleting list in Thread A, thread B will delete the same list again. It
will cause issue of list_del corruption.
Setting req->status to REQ_STATUS_ERROR under lock prevents other
cleanup paths from trying to manipulate req_list.
The other thread can safely check req->status because it still holds a
reference to req at this point.
Link: https://lkml.kernel.org/r/20221110122606.383352-1-shaozhengchao@huawei.com
Fixes: 52f1c45dde ("9p: trans_fd/p9_conn_cancel: drop client lock earlier")
Reported-by: syzbot+9b69b8d10ab4a7d88056@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
[Dominique: add description of the fix in commit message]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
This parse_opts will set invalid opts.rfd/wfd in case of failure which
we already check, but it is not clear for readers that parse_opts error
are handled in p9_fd_create: clarify this by explicitely checking the
return value.
Link: https://lkml.kernel.org/r/20220921210921.1654735-1-floridsleeves@gmail.com
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
[Dominique: reworded commit message to clarify this is NOOP]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Shamelessly copying the explanation from Tetsuo Handa's suggested
patch[1] (slightly reworded):
syzbot is reporting inconsistent lock state in p9_req_put()[2],
for p9_tag_remove() from p9_req_put() from IRQ context is using
spin_lock_irqsave() on "struct p9_client"->lock but trans_fd
(not from IRQ context) is using spin_lock().
Since the locks actually protect different things in client.c and in
trans_fd.c, just replace trans_fd.c's lock by a new one specific to the
transport (client.c's protect the idr for fid/tag allocations,
while trans_fd.c's protects its own req list and request status field
that acts as the transport's state machine)
Link: https://lore.kernel.org/r/20220904112928.1308799-1-asmadeus@codewreck.org
Link: https://lkml.kernel.org/r/2470e028-9b05-2013-7198-1fdad071d999@I-love.SAKURA.ne.jp [1]
Link: https://syzkaller.appspot.com/bug?extid=2f20b523930c32c160cc [2]
Reported-by: syzbot <syzbot+2f20b523930c32c160cc@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
syzbot is reporting hung task at p9_fd_close() [1], for p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is failing to interrupt already
started kernel_read() from p9_fd_read() from p9_read_work() and/or
kernel_write() from p9_fd_write() from p9_write_work() requests.
Since p9_socket_open() sets O_NONBLOCK flag, p9_mux_poll_stop() does not
need to interrupt kernel_read()/kernel_write(). However, since p9_fd_open()
does not set O_NONBLOCK flag, but pipe blocks unless signal is pending,
p9_mux_poll_stop() needs to interrupt kernel_read()/kernel_write() when
the file descriptor refers to a pipe. In other words, pipe file descriptor
needs to be handled as if socket file descriptor.
We somehow need to interrupt kernel_read()/kernel_write() on pipes.
A minimal change, which this patch is doing, is to set O_NONBLOCK flag
from p9_fd_open(), for O_NONBLOCK flag does not affect reading/writing
of regular files. But this approach changes O_NONBLOCK flag on userspace-
supplied file descriptors (which might break userspace programs), and
O_NONBLOCK flag could be changed by userspace. It would be possible to set
O_NONBLOCK flag every time p9_fd_read()/p9_fd_write() is invoked, but still
remains small race window for clearing O_NONBLOCK flag.
If we don't want to manipulate O_NONBLOCK flag, we might be able to
surround kernel_read()/kernel_write() with set_thread_flag(TIF_SIGPENDING)
and recalc_sigpending(). Since p9_read_work()/p9_write_work() works are
processed by kernel threads which process global system_wq workqueue,
signals could not be delivered from remote threads when p9_mux_poll_stop()
from p9_conn_destroy() from p9_fd_close() is called. Therefore, calling
set_thread_flag(TIF_SIGPENDING)/recalc_sigpending() every time would be
needed if we count on signals for making kernel_read()/kernel_write()
non-blocking.
Link: https://lkml.kernel.org/r/345de429-a88b-7097-d177-adecf9fed342@I-love.SAKURA.ne.jp
Link: https://syzkaller.appspot.com/bug?extid=8b41a1365f1106fd0f33 [1]
Reported-by: syzbot <syzbot+8b41a1365f1106fd0f33@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+8b41a1365f1106fd0f33@syzkaller.appspotmail.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: add comment at Christian's suggestion]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
So far 'msize' was simply used for all 9p message types, which is far
too much and slowed down performance tremendously with large values
for user configurable 'msize' option.
Let's stop this waste by using the new p9_msg_buf_size() function for
allocating more appropriate, smaller buffers according to what is
actually sent over the wire.
Only exception: RDMA transport is currently excluded from this message
size optimization - for its response buffers that is - as RDMA transport
would not cope with it, due to its response buffers being pulled from a
shared pool. [1]
Link: https://lore.kernel.org/all/Ys3jjg52EIyITPua@codewreck.org/ [1]
Link: https://lkml.kernel.org/r/3f51590535dc96ed0a165b8218c57639cfa5c36c.1657920926.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
This new function calculates a buffer size suitable for holding the
intended 9p request or response. For rather small message types (which
applies to almost all 9p message types actually) simply use hard coded
values. For some variable-length and potentially large message types
calculate a more precise value according to what data is actually
transmitted to avoid unnecessarily huge buffers.
So p9_msg_buf_size() divides the individual 9p message types into 3
message size categories:
- dynamically calculated message size (i.e. potentially large)
- 8k hard coded message size
- 4k hard coded message size
As for the latter two hard coded message types: for most 9p message
types it is pretty obvious whether they would always fit into 4k or
8k. But for some of them it depends on the maximum directory entry
name length allowed by OS and filesystem for determining into which
of the two size categories they would fit into. Currently Linux
supports directory entry names up to NAME_MAX (255), however when
comparing the limitation of individual filesystems, ReiserFS
theoretically supports up to slightly below 4k long names. So in
order to make this code more future proof, and as revisiting it
later on is a bit tedious and has the potential to miss out details,
the decision [1] was made to take 4k as basis as for max. name length.
Link: https://lkml.kernel.org/r/bd6be891cf67e867688e8c8796d06408bfafa0d9.1657920926.git.linux_oss@crudebyte.com
Link: https://lore.kernel.org/all/5564296.oo812IJUPE@silver/ [1]
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Refactor 'max_size' argument of p9_tag_alloc() and 'req_size' argument
of p9_client_prepare_req() both into a pair of arguments 't_size' and
'r_size' respectively to allow handling the buffer size for request and
reply separately from each other.
Link: https://lkml.kernel.org/r/9431a25fe4b37fd12cecbd715c13af71f701f220.1657920926.git.linux_oss@crudebyte.com
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
* more new_sync_{read,write}() speedups - ITER_UBUF introduction
* ITER_PIPE cleanups
* unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
* making ITER_PIPE take high-order pages without splitting them
* handling copy_page_from_iter() for high-order pages properly
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYvHI8QAKCRBZ7Krx/gZQ
62CQAPsGlbebqBeAT2pMulaGDxfLAsgz5Yf4BEaMLhPtRqFOQgD+KrZQId7Sd8O0
3IWucpTb2c4jvLlXhGMS+XWnusQH+AQ=
=pBux
-----END PGP SIGNATURE-----
Merge tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more iov_iter updates from Al Viro:
- more new_sync_{read,write}() speedups - ITER_UBUF introduction
- ITER_PIPE cleanups
- unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
- making ITER_PIPE take high-order pages without splitting them
- handling copy_page_from_iter() for high-order pages properly
* tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
fix copy_page_from_iter() for compound destinations
hugetlbfs: copy_page_to_iter() can deal with compound pages
copy_page_to_iter(): don't split high-order page in case of ITER_PIPE
expand those iov_iter_advance()...
pipe_get_pages(): switch to append_pipe()
get rid of non-advancing variants
ceph: switch the last caller of iov_iter_get_pages_alloc()
9p: convert to advancing variant of iov_iter_get_pages_alloc()
af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages()
iter_to_pipe(): switch to advancing variant of iov_iter_get_pages()
block: convert to advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: saner helper for page array allocation
fold __pipe_get_pages() into pipe_get_pages()
ITER_XARRAY: don't open-code DIV_ROUND_UP()
unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts
unify xarray_get_pages() and xarray_get_pages_alloc()
unify pipe_get_pages() and pipe_get_pages_alloc()
iov_iter_get_pages(): sanity-check arguments
iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper
...
- a couple of fixes
- add a tracepoint for fid refcounting
- some cleanup/followup on fid lookup
- some cleanup around req refcounting
-----BEGIN PGP SIGNATURE-----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=941k
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.20' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- a couple of fixes
- add a tracepoint for fid refcounting
- some cleanup/followup on fid lookup
- some cleanup around req refcounting
* tag '9p-for-5.20' of https://github.com/martinetd/linux:
net/9p: Initialize the iounit field during fid creation
net: 9p: fix refcount leak in p9_read_work() error handling
9p: roll p9_tag_remove into p9_req_put
9p: Add client parameter to p9_req_put()
9p: Drop kref usage
9p: Fix some kernel-doc comments
9p fid refcount: cleanup p9_fid_put calls
9p fid refcount: add a 9p_fid_ref tracepoint
9p fid refcount: add p9_fid_get/put wrappers
9p: Fix minor typo in code comment
9p: Remove unnecessary variable for old fids while walking from d_parent
9p: Make the path walk logic more clear about when cloning is required
9p: Track the root fid with its own variable during lookups
Ensure that the fid's iounit field is set to zero when a new fid is
created. Certain 9P operations, such as OPEN and CREATE, allow the
server to reply with an iounit size which the client code assigns to the
p9_fid struct shortly after the fid is created by p9_fid_create(). On
the other hand, an XATTRWALK operation doesn't allow for the server to
specify an iounit value. The iounit field of the newly allocated p9_fid
struct remained uninitialized in that case. Depending on allocation
patterns, the iounit value could have been something reasonable that was
carried over from previously freed fids or, in the worst case, could
have been arbitrary values from non-fid related usages of the memory
location.
The bug was detected in the Windows Subsystem for Linux 2 (WSL2) kernel
after the uninitialized iounit field resulted in the typical sequence of
two getxattr(2) syscalls, one to get the size of an xattr and another
after allocating a sufficiently sized buffer to fit the xattr value, to
hit an unexpected ERANGE error in the second call to getxattr(2). An
uninitialized iounit field would sometimes force rsize to be smaller
than the xattr value size in p9_client_read_once() and the 9P server in
WSL refused to chunk up the READ on the attr_fid and, instead, returned
ERANGE to the client. The virtfs server in QEMU seems happy to chunk up
the READ and this problem goes undetected there.
Link: https://lkml.kernel.org/r/20220710141402.803295-1-tyhicks@linux.microsoft.com
Fixes: ebf46264a0 ("fs/9p: Add support user. xattr")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
p9_req_put need to be called when m->rreq->rc.sdata is NULL to avoid
temporary refcount leak.
Link: https://lkml.kernel.org/r/20220712104438.30800-1-hbh25y@gmail.com
Fixes: 728356dede ("9p: Add refcount to p9_req_t")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
[Dominique: commit wording adjustments, p9_req_put argument fixes for rebase]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
mempool prep commit removed the awkward kref usage which didn't
allow passing client pointer easily with the ref, so we no longer
need a separate function to remove the tag from idr.
This has the side benefit that it should be more robust in detecting
leaks: umount will now properly catch unfreed requests as they still
will be in the idr until the last ref is dropped
Link: https://lkml.kernel.org/r/20220712060801.2487140-1-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
This is to aid in adding mempools, in the next patch.
Link: https://lkml.kernel.org/r/20220704014243.153050-2-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
An upcoming patch is going to require passing the client through
p9_req_put() -> p9_req_free(), but that's awkward with the kref
indirection - so this patch switches to using refcount_t directly.
Link: https://lkml.kernel.org/r/20220704014243.153050-1-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
