- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
- New Device Support
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
- New Functionality
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
- Fix-ups
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
- Bug Fixes
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues
-----BEGIN PGP SIGNATURE-----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=9kd5
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
New Device Support:
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
New Functionality:
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
Fix-ups:
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
Bug Fixes:
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues"
* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
leds: sgm3140: Add richtek,rt5033-led compatible
dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
dt-bindings: leds: Drop unneeded quotes
leds: Fix config reference for AW200xx driver
leds: leds-mt6323: Add support for WLEDs and MT6332
leds: leds-mt6323: Add support for MT6331 leds
leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
leds: leds-mt6323: Specify registers and specs in platform data
dt-bindings: leds: leds-mt6323: Document mt6332 compatible
dt-bindings: leds: leds-mt6323: Document mt6331 compatible
leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
leds: simatic-ipc-leds-gpio: Split up into multiple drivers
leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
leds: cht-wcove: Remove unneeded semicolon
leds: cht-wcove: Fix an unsigned comparison which can never be negative
...
MAINTAINERS
* add missing driver git trees
ath11k
* factory test mode support
iwlwifi
* config rework to drop test devices and
split the different families
* major update for new firmware and MLO
stack
* initial multi-link reconfiguration suppor
* multi-BSSID and MLO improvements
other
* fix the last few W=1 warnings from GCC 13
* merged wireless tree to avoid conflicts
-----BEGIN PGP SIGNATURE-----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=KSBu
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Notable changes this time around:
MAINTAINERS
- add missing driver git trees
ath11k
- factory test mode support
iwlwifi
- config rework to drop test devices and
split the different families
- major update for new firmware and MLO
stack
- initial multi-link reconfiguration suppor
- multi-BSSID and MLO improvements
other
- fix the last few W=1 warnings from GCC 13
- merged wireless tree to avoid conflicts
* tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits)
wifi: ieee80211: fix erroneous NSTR bitmap size checks
wifi: rtlwifi: cleanup USB interface
wifi: rtlwifi: simplify LED management
wifi: ath10k: improve structure padding
wifi: ath9k: convert msecs to jiffies where needed
wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow
wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow
wifi: iwlwifi: mvm: Refactor security key update after D3
wifi: mac80211: mark keys as uploaded when added by the driver
wifi: iwlwifi: remove support of A0 version of FM RF
wifi: iwlwifi: cfg: clean up Bz module firmware lines
wifi: iwlwifi: pcie: add device id 51F1 for killer 1675
wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices
wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants
wifi: iwlwifi: also unify Ma device configurations
wifi: iwlwifi: also unify Sc device configurations
wifi: iwlwifi: unify Bz/Gl device configurations
wifi: iwlwifi: pcie: also drop jacket from info macro
wifi: iwlwifi: remove support for *nJ devices
wifi: iwlwifi: don't load old firmware for 22000
...
====================
Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Properly check for RX_DROP_UNUSABLE now that the new drop reason
infrastructure is used. Without this change, the comparison will always
be false as a more specific reason is given in the lower bits of result.
Fixes: baa951a1c1 ("mac80211: use the new drop reasons infrastructure")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230621120543.412920-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the driver has some form of GTK rekeying offload, e.g. during
WoWLAN, mac80211 can assume that keys that the driver adds for
that are already present in the hardware acceleration. Mark them
accordingly.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621144414.bc78c7ff2a3d.I5e313d69e2b6a7a4766ef82d0faa122dd4c1c46d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For extended elements, we currently only calculate the CRC
for some of them, but really we should do it also for the
rest that we care about, such as EHT operation and multi-
link.
Also, while at it, it seems we should do it even if they
aren't well-formed, so we notice if that changes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.93235d5c8651.I6615cb3c1244bc9618066baa2bdad7982e9abd1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct sta_info may be removed without holding sta_mtx if it has not
yet been inserted. To support this, only assert that the lock is held
for links other than the deflink.
This fixes lockdep issues that may be triggered in error cases.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.cdd81377dea0.If5a6734b4b85608a2275a09b4f99b5564d82997f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to all the multi-link handling, we now expose the fact that
the sdata/vif is locked to drivers, e.g. when the driver uses
ieee80211_set_monitor_channel(). This was true when a chanctx
is added to or removed from a link, _except_ in monitor mode
with the virtual sdata/vif. Change that, so that drivers can
make that assumption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.a5cf7534beda.I5b51664231abee27e02f222083df7ccf88722929@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When receiving a multi-link association response, make sure to
track the BSS parameter change count for each link, including
the assoc link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.1799c164e7e9.I8e2c1f5eec6eec3fab525ae2dead9f6f099a2427@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We should not receive/handle unicast protected dual
or public action frames that aren't protected, so
drop them - in the latter case of course only if MFP
is used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619161906.eb4461108129.I3c2223cf29d8a3586dfc74b2dda3f6fa2a4eea7c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When MFP is used, drop unprotected robust management frames also
before the 4-way handshake has been completed, i.e. no key has
been installed yet.
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230619183718.cfbefddccd0c.Ife369dbb61c87e311ce15739d5b2b4763bfdfbae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There were crashes reported in this code, and the timer_shutdown()
warning in one of the previous patches indicates that the timeout
timer for the AP response (addba_resp_timer) is still armed while
we're stopping the aggregation session.
After a very long deliberation of the code, so far the only way I
could find that might cause this would be the following sequence:
- session start requested
- session start indicated to driver, but driver returns
IEEE80211_AMPDU_TX_START_DELAY_ADDBA
- session stop requested, sets HT_AGG_STATE_WANT_STOP
- session stop worker runs ___ieee80211_stop_tx_ba_session(),
sets HT_AGG_STATE_STOPPING
From here on, the order doesn't matter exactly, but:
1. driver calls ieee80211_start_tx_ba_cb_irqsafe(),
setting HT_AGG_STATE_START_CB
2. driver calls ieee80211_stop_tx_ba_cb_irqsafe(),
setting HT_AGG_STATE_STOP_CB
3. the worker will run ieee80211_start_tx_ba_cb() for
HT_AGG_STATE_START_CB
4. the worker will run ieee80211_stop_tx_ba_cb() for
HT_AGG_STATE_STOP_CB
(the order could also be 1./3./2./4.)
This will cause ieee80211_start_tx_ba_cb() to send out the AddBA
request frame to the AP and arm the timer, but we're already in
the middle of stopping and so the ieee80211_stop_tx_ba_cb() will
no longer assume it needs to stop anything.
Prevent this by checking for WANT_STOP/STOPPING in the start CB,
and warn if we're sending a frame on a stopping session.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.e5b52777462a.I0b2ed6658e81804279f5d7c9c1918cb1f6626bf2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is all true today, but difficult to understand since
the callers are in other files etc. Add two new lockdep
assertions to make things easier to read.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.7f03dec6a90b.I762c11e95da005b80fa0184cb1173b99ec362acf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are cases where keeping sdata locked for an operation. Add a
variant that does not take sdata lock to permit these usecases.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are cases where keeping sdata locked for an operation. Add a
variant that does not take sdata lock to permit these usecases.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The helper functions to retrieve the EML capabilities and medium
synchronization delay both assume that the type is correct. Instead of
assuming the length is correct and still checking the type, add a new
helper to check both and don't do any verification.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.1b50e7a3b3cf.I9385514d8eb6d6d3c82479a6fa732ef65313e554@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Include the Multi-Link elements found in beacon frames
in the CRC calculation, as these elements are intended
to reflect changes in the AP MLD state.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214435.ae8246b93d85.Ia64b45198de90ff7f70abcc997841157f148ea40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As a preparation to support Reconfiguration Multi Link
element, rename 'multi_link' and 'multi_link_len' fields
in 'struct ieee802_11_elems' to 'ml_basic' and 'ml_basic_len'.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.b11370d3066a.I34280ae3728597056a6a2f313063962206c0d581@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Doing this simplifies the code somewhat, as iteration over the
nontransmitted BSSs is not required anymore. Also, mac80211 should
not be iterating over the nontrans_list as it should only be accessed
while the bss_lock is held.
It also simplifies parsing of the IEs somewhat, as cfg80211 already
extracts the IEs and passes them to the callback.
Note that the only user left requiring parsing a specific BSS is the
association code if a beacon is required by the hardware.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.39ebfe2f9e59.Ia012b08e0feed8ec431b666888b459f6366f7bd1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add NULL check for compat variable to avoid crash in
cfg80211_chandef_compatible() if it got called with
some mixed up channel context where not all the users
compatible with each other, which shouldn't happen.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.ae0f10dfd36b.Iea98c74aeb87bf6ef49f6d0c8687bba0dbea2abd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In both of these cases (config_link, prep_channel) it is not needed
to parse the MBSSID data for a nontransmitted BSS. In the config_link
case the frame does not contain any MBSSID element and inheritance
rules are only needed for the ML STA profile. While in the
prep_channel case the IEs have already been processed by cfg80211 and
are already exploded.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.66d2605ff0ad.I7cdd1d390e7b0735c46204231a9e636d45b7f1e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device is associated with an AP MLD, then TDLS data frames
should have
- A1 = peer address,
- A2 = own MLD address (since the peer may now know about MLO), and
- A3 = BSSID.
Change the code to do that.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.4bf648b63dfd.I98ef1dabd14b74a92120750f7746a7a512011701@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Userspace can now select the link to use for TDLS management
frames (indicating e.g. which BSSID should be used), use the
link_id received from cfg80211 to build the frames.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.ce1fc230b505.Ie773c5679805001f5a52680d68d9ce0232c57648@changeid
[Benjamin fixed some locking]
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
[fix sta mutex locking too]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For multi-link operation(MLO) TDLS management
frames need to be transmitted on a specific link.
The TDLS setup request will add BSSID along with
peer address and userspace will pass the link-id
based on BSSID value to the driver(or mac80211).
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.cb3d87c22812.Ia3d15ac4a9a182145bf2d418bcb3ddf4539cd0a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mesh mode, ieee80211_chandef_he_6ghz_oper() is called by
mesh_matches_local() for every received mesh beacon.
On a 6 GHz mesh of a HE-only phy, this spams that the hardware does not
have EHT capabilities, even if the received mesh beacon does not have an
EHT element.
Unlike HE, not supporting EHT in the 6 GHz band is not an error so do
not print anything in this case.
Fixes: 5dca295dd7 ("mac80211: Add initial support for EHT and 320 MHz channels")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230614132648.28995-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since LOCAL_ASSIGN is only used by
TRACE macros and the return values are ignored.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230613003404.3538524-1-azeemshaikh38@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As a preparation to support disabled/dormant links, add the
following function:
- ieee80211_vif_usable_links(): returns the bitmap of the links
that can be activated. Use this function in all the places that
the bitmap of the usable links is needed.
- ieee80211_vif_is_mld(): returns true iff the vif is an MLD.
Use this function in all the places where an indication that the
connection is a MLD is needed.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.86e3351da1fc.If6fe3a339fda2019f13f57ff768ecffb711b710a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are cases in which we don't want the user to override the
smps mode, e.g. when SMPS should be disabled due to EMLSR. Add
a driver flag to disable SMPS overriding and don't override if
it is set.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.ef129e80556c.I74a298fdc86b87074c95228d3916739de1400597@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we get an NDP (null data packet), there's reason to
believe the peer is just sending it to probe, and that
would happen at a low rate. Don't track this packet for
purposes of last RX rate reporting.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.8af46c4ac094.I13d9d5019addeaa4aff3c8a05f56c9f5a86b1ebd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The channel switch parsing code would simply return if a scan is
in-progress. Supposedly, this was because channel switch announcements
from other APs should be ignored.
For the beacon case, the function is already only called if we are
associated with the sender. For the action frame cases, add the
appropriate check whether the frame is coming from the AP we are
associated with. Finally, drop the scanning check from
ieee80211_sta_process_chanswitch.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.3366e9302468.I6c7e0b58c33b7fb4c675374cfe8c3a5cddcec416@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In suspend flow "sdata" is NULL, destroy all roc's which are started.
pass "roc->sdata" to drv_cancel_remain_on_channel() to avoid NULL
dereference and destroy that roc
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.c678187a308c.Ic11578778655e273931efc5355d570a16465d1be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's quite a bit of code accessing sband iftype data
(HE, HE 6 GHz, EHT) and we always need to remember to use
the ieee80211_vif_type_p2p() helper. Add new helpers to
directly get it from the sband/vif rather than having to
call ieee80211_vif_type_p2p().
Convert most code with the following spatch:
@@
expression vif, sband;
@@
-ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_eht_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_6ghz_capa_vif(sband, vif)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.db099f49e764.Ie892966c49e22c7b7ee1073bc684f142debfdc84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
