The pllp_out2 should be integer only, the fractional bit should always be 0.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add support to gate the clocks that directly feed peripherals. For clocks
with multiple parents, add the ability to determine the correct parent,
and also set parents. Also add support to calculate and set the clocks'
rate.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
CC: <linux@arm.linux.org.uk>
v4:
- Add Acked-by: Mike Turquette
v3:
- Addressed comments from Pavel
v2:
- Fix space/indent errors
- Add streq for strcmp == 0
Signed-off-by: Olof Johansson <olof@lixom.net>
The pllc and pllxc code weren't always using the correct pdiv_map to
map between the post divider value and the hw p field. This could result
in illegal values being programmed in the hw.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
From Alexander Shiyan, this is a series of cleanups of clps711x, movig it
closer to multiplatform and cleans up a bunch of old code.
* clps711x/soc:
ARM: clps711x: Update defconfig
ARM: clps711x: Add support for SYSCON driver
ARM: clps711x: edb7211: Control LCD backlight via PWM
ARM: clps711x: edb7211: Add support for I2C
ARM: clps711x: Optimize interrupt handling
ARM: clps711x: Add clocksource framework
ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
ARM: clps711x: Move specific definitions from hardware.h to boards files
ARM: clps711x: p720t: Define PLD registers as GPIOs
ARM: clps711x: autcpu12: Move remaining specific definitions to board file
ARM: clps711x: autcpu12: Special driver for handling memory is removed
ARM: clps711x: autcpu12: Add support for NOR flash
ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
ARM: clps711x: Re-add GPIO support
GPIO: clps711x: Add DT support
GPIO: clps711x: Rewrite driver for using generic GPIO code
+ Linux 3.10-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch is required to be able to disable spear320 support
after the spear320_clk_init() prototype changed for the real
function but not for the dummy.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add G2D clocks for Exynos4x12 SoC and sclk_fimg2d required by G2D
IP.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The KDIV value is often listed as unsigned but it needs to be treated
as a 16-bit signed value when using it in calculations. Fix our rate
recalculation to do this correctly.
Before doing this, I tried setting EPLL on exynos5250 to:
rate, m, p, s, k = 80000000, 107, 2, 4, 43691
This rate is exactly from the table in the exynos5250 user manual.
I read this back as 80750003 with:
cat /sys/kernel/debug/clk/fin_pll/fout_epll/clk_rate
After this patch, it reads back as 80000003
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Reviewed-by: Vikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
If the current rate of parent clock is sufficient to provide child a
requested rate with a proper divider setting, the rate change request
should not be propagated. Instead, changing the divider setting is good
enough to get child clock run at the requested rate.
On an imx6q clock configuration illustrated below,
ahb --> ipg --> ipg_per
132M 66M 66M
calling clk_set_rate(ipg_per, 22M) with the current
clk_divider_bestdiv() implementation will result in the rate change up
to ahb level like the following, because of the unnecessary/incorrect
rate change propagation.
ahb --> ipg --> ipg_per
66M 22M 22M
Fix the problem by trying to see if the requested rate can be achieved
by simply changing the divider value, and in that case return the
divider immediately from function clk_divider_bestdiv() as the best
one, so that all those unnecessary rate change propagation can be saved.
Reported-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
'mout_mpll' is added the list of parent clocks for 'mout_cpu'.
'mout_mpll' is an alias to the clock 'sclk_mpll'. Hence 'sclk_mpll'
should be added to the list of parent clocks.
This results in an error when cpufreq driver for EXYNOS5250 tries to
set 'mout_mpll' as a parent for 'mout_cpu'.
clk_set_parent: clk sclk_mpll can not be parent of clk mout_cpu
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
cpufreq driver for EXYNOS5250 is not a platform driver, hence we cannot
currently pass the clock names through a device tree node. Instead, we
need to make them available through a global alias.
cpufreq driver for EXYNOS5250 requires four clocks - 'armclk',
'mout_cpu', 'mout_mpll' and 'mout_apll'.
'armclk' has already been defined with an alias, 'mout_cpu', 'mout_mpll'
and 'mout_apll' are now defined with an alias.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
First clocks definition version of PRCMU and PRCC clocks for u8540 platform
Signed-off-by: Philippe Begnic <philippe.begnic@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Align on u8500 version, pass clock base address in clk_init functions
for u8540 and u9540.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Philippe Begnic <philippe.begnic@st.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The msenc clock's register was set to the usb3 clock's register.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
- clk: mvebu
- reorganize by SoC to remove built up #ifdefs
- add clk flags per clock gate
Note: this branch only depends on mvebu/pcie in order to prevent managing a
tricky modify/remove file merge conflict. By rebasing on mvebu/pcie, we are
able to build the resolution into the patch series. The change is small, and
has been tested by the respective authors.
depends:
- mvebu/pcie
- mvebu/of_pci
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRplb0AAoJEAi3KVZQDZAefTAH/1PMcXV+N/9HUgmx9XNpWg7Z
3ODWrA7Ewdvq9hfv9t+EH0FIdrZRA400p+AJuWSUuLzS7NzmCMTk/Pzad/W36ZY2
+8yJXVThSHqEQN/Vi1FtZGTKqRXZX/udVH5oNFV9jrUEFvLwuI/6/hCdkzlFKEol
9YJHNUyiul9P0jpcDXSSTFCpNXUPgQPuGTtIip0TKFmZOdA2QglgQAVkIwACZ+uX
PA7ewiFj1yfOhv8eh+nnb5kAsJEj1ynfMJywn7P/OC6ugAJtE9D0ZpzlYuj3lFEo
Z2snnzU7wVARfp1i6x3kNUyBiGHnJfxJC1KMePj87XP80BVzX1rmCoFY6x9nutg=
=jIi7
-----END PGP SIGNATURE-----
Merge tag 'seb_clk-3.11' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper:
mvebu clock restructuring for v3.11
- clk: mvebu
- reorganize by SoC to remove built up #ifdefs
- add clk flags per clock gate
* tag 'seb_clk-3.11' of git://git.infradead.org/users/jcooper/linux:
clk: mvebu: disintegrate obsolete file
ARM: mvebu: move DT boards to SoC-centric clock init
ARM: kirkwood: move DT boards to SoC-centric clock init
ARM: dove: move DT boards to SoC-centric clock init
clk: mvebu: add Armada XP SoC-centric clock init
clk: mvebu: add Armada 370 SoC-centric clock init
clk: mvebu: add Kirkwood SoC-centric clock init
clk: mvebu: add Dove SoC-centric clock init
clk: mvebu: add common clock functions for core clk and clk gating
clk: mvebu: introduce per-clock-gate flags
- mvebu pcie
- fix return value check in mvebu_pcie_probe()
depends
- mvebu/of_pci
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRpPzyAAoJEAi3KVZQDZAeuf0H/2FsmnLgvJh24z1B1HLuWm52
TYgoORahPsuoP7L2RZBU6n3++UuX4NGbVcagqRDe1Asou0oG0fu6oXbdn0d4avff
hoIuRq3LWhQ6DYaeV34vV8vM8x79HYM7FT92zX7VZKJ6TL6KGSHHSvVKhqWo7y65
++Ogtl5hzjyMzcQo5LoDQ+bqVLZpbfF7D/dreCCzzmlODqCNZGoBeZOwTqyR9kDW
aO65yDcsFIky2YAGz+uT0ItNpAtGzshJU/d6QTHNlvKeae2NjMqv2X7hP4161uQ4
NGyCsm7Aif5WnBQGQsvgCIPnuxTaYaGOSZQLMG7pN7TJQgx0sgF93HmX/gUI/WQ=
=ye72
-----END PGP SIGNATURE-----
Merge tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
PCI-e driver for mvebu.
* tag 'pcie-3.11-2' of git://git.infradead.org/users/jcooper/linux:
pci: mvebu: fix return value check in mvebu_pcie_probe()
arm: mvebu: PCIe support is now available on mvebu
pci: PCIe driver for Marvell Armada 370/XP systems
clk: mvebu: add more PCIe clocks for Armada XP
clk: mvebu: create parent-child relation for PCIe clocks on Armada 370
of/pci: Add of_pci_parse_bus_range() function
of/pci: Add of_pci_get_devfn() function
of/pci: Provide support for parsing PCI DT ranges property
Signed-off-by: Olof Johansson <olof@lixom.net>
Use common of_clk_init() function for clocks initialization.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Tegra has a blink timer register that allows to modulate the
clk_32k clock before outputting it. Since clk_32k is presented to the
kernel as a fixed clock, make sure this register does not tamper with
the clock frequency and that clk_32k is outputted as-is, similarly to
what is done on t20 and t30.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Number of parents for clk_out_2 and clk_out_3 was incorrectly set
to clk_out1_parents. Even though it did not break anything since the
size was same better to fix.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch adds a basic clock driver for the TI-Nspire calculator
series.
Changes from v1:
* Removed filename in header comment
* Removed unnecessary #undef EXTRACT statement
Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed $SUBJECT and changelog max width]
Fix the following sparse warnings:
drivers/clk/mxs/clk-imx28.c:72:5: warning: symbol 'mxs_saif_clkmux_select' was not declared. Should it be static?
drivers/clk/mxs/clk-imx28.c:156:12: warning: symbol 'mx28_clocks_init' was not declared. Should it be static?
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed $SUBJECT line]
Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The compatible string of clock is changed from *-2 to *-2.0
on chassis 2. So updated it accordingly.
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: improved $SUBJECT line]
With the addition of a DVO clock, a bug is now evident in the vt8500
clock code:
[ 0.290000] WARNING: at init/main.c:698 do_one_initcall+0x158/0x18c()
[ 0.300000] initcall wm8505fb_driver_init+0x0/0xc returned with disabled int
This is caused by an unbalanced spinlock in vt8500_dclk_set_rate().
Replace the second call to spin_lock_irqsave() with spin_unlock_irqrestore().
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
In some architectures, the #define cpu_data is not a "macro-function",
so the compiler will substitute the identifier with probably something
wrong.
Signed-off-by: Giacomo A. Catenazzi <cate@cateee.net>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
[emilio@elopez.com.ar: use cpu_mux_data instead of this_cpu_data]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
'mout_mpll' is added the list of parent clocks for 'mout_cpu'.
'mout_mpll' is an alias to the clock 'sclk_mpll'. Hence 'sclk_mpll'
should be added to the list of parent clocks.
This results in an error when cpufreq driver for EXYNOS5250 tries to
set 'mout_mpll' as a parent for 'mout_cpu'.
clk_set_parent: clk sclk_mpll can not be parent of clk mout_cpu
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
cpufreq driver for EXYNOS5250 is not a platform driver, hence we cannot
currently pass the clock names through a device tree node. Instead, we
need to make them available through a global alias.
cpufreq driver for EXYNOS5250 requires four clocks - 'armclk',
'mout_cpu', 'mout_mpll' and 'mout_apll'.
'armclk' has already been defined with an alias, 'mout_cpu', 'mout_mpll'
and 'mout_apll' are now defined with an alias.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
clock-frequency property from platform data was read but never used.
Apply defined rate when clock is registered.
Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: add missing changelog]
Cc: stable@kernel.org
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Rate was incorrectly computed because we read from wrong divider register.
Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: stable@kernel.org
The divisor adjustment code to ensure that a divisor is not rounded down,
thereby giving a rate higher than requested, is unnecessary and in some
instances results in the actual rate being much lower than requested due to
rounding errors.
The test is already performed in vtwm_dclk_round_rate(), which is always
called when clk_set_rate is called. Due to rounding errors in the line:
divisor = parent_rate / rate (clk-vt8500.c:160) we will sometimes end up
adjusting the divisor twice - first in round_rate and then again in set_rate.
This patch removes the test/adjustment in vtwm_dclk_set_rate.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The WM8850 has a different PLL clock to the previous versions. This
patch adds support for the WM8850-style PLL clocks.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Switch from function-centric to soc-centric clock drivers now makes
a bunch of files obsolete. This deletes all files and Kconfig options
that are not required anymore.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This is moving core clock and clock gating init for Armada XP to
its own file and adds a Kconfig option. Also init functions are added
and declared so they get called on of_clk_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This is moving core clock and clock gating init for Armada 370 to
its own file and adds a Kconfig option. Also init functions are added
and declared so they get called on of_clk_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This is moving core clock and clock gating init for Kirkwood to its
own file and adds a Kconfig option. Also init functions are added and
declared so they get called on of_clk_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This is moving core clock and clock gating init for Dove to its own
file and adds a Kconfig option. Also init functions are added and
declared so they get called on of_clk_init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Based on the current common functions for core clocks and clock
gating control, new common functions are joined in a single file.
Given the opportunity, names of functions and structs are unified,
and also a Kconfig entry is added.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Clock gates found on MVEBU SoCs get registered by a common function.
To allow specific SoCs to provide tweaks introduce flags to the clock
gate descriptor instead of filling up the common function SoC specific
tweaks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Currently no driver *) handles the sysreg clock, with an assumption
that this clock is always left in its default state (enabled).
Before commit 6e6aac7590
ARM: EXYNOS: Migrate clock support to common clock framework
the sysreg clock was not even defined and hence wasn't handled
explicitly in the kernel.
To restore the previous behaviour disable masking the sysreg clock
off in the clock core by default.
*) Except the Exynos4x12 FIMC-IS driver, which will be modified
to not touch the sysreg clock.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Fix clk_reg_sysctrl() to set main clock registers of new struct
clk_sysctrl even if the registered clock has no parents.
This fixes an issue where "ulpclk" was registered with all clk->reg_*
fields uninitialized, causing a -EINVAL error from clk_prepare().
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
First Ethernet device has a ".0" appended onto the device name. It
appears that we need this in order to obtain the correct clock.
Without this fix Ethernet does not function on Ux500 devices, which is a
regression.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: improved changelog]
With deferred probing, late_initcall() is too soon to declare a clock as
unused. Wait for deferred probing to finish before declaring a clock as
unused. Since deferred probing is done in late_initcall(), do the unused
check to late_initcall_sync.
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Current code looks strange because calling wm831x_clkout_set_parent() with 0 as
parent parameter, wm831x_clkout_get_parent() will return 1.
According to the datasheet:
R16528 (4090h) Clock Control1
BIT 0: CLKOUT output source select
0 = FLL output
1 = 32.768kHz oscillator
Thus fix the entry order in wm831x_clkout_parents[] to make it has
the same meaning as the datasheet and make the return value
of wm831x_clkout_get_parent() consistent with the parent pass to
wm831x_clkout_set_parent().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
According to the datasheet, FLL Enable is controlled by
R16530 (4092h) FLL Control1
BIT 0: FLL Enable
0 = Disable
1 = Enable
Thus the code should update WM831X_FLL_CONTROL_1 register rather than
WM831X_FLL_CONTROL_2 register.
Also fixes a trivial typo in dev_crit message.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
With of_clk_provider stubs for CONFIG_OF not set, we can now also enable
clk-si5351 on those architectures.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Without this patch, the following race condition is possible.
* clk-A has two parents - clk-X and clk-Y.
* All three are disabled and clk-X is current parent.
* Thread A: clk_set_parent(clk-A, clk-Y).
* Thread A: <snip execution flow>
* Thread A: Grabs enable lock.
* Thread A: Sees enable count of clk-A is 0, so doesn't enable clk-Y.
* Thread A: Updates clk-A SW parent to clk-Y
* Thread A: Releases enable lock.
* Thread B: clk_enable(clk-A).
* Thread B: clk_enable() enables clk-Y, then enabled clk-A and returns.
clk-A is now enabled in software, but not clocking in hardware since the
hardware parent is still clk-X.
The only way to avoid race conditions between clk_set_parent() and
clk_enable/disable() is to ensure that clk_enable/disable() calls don't
require changes to hardware enable state between changes to software clock
topology and hardware clock topology.
The options to achieve the above are:
1. Grab the enable lock before changing software/hardware topology and
release it afterwards.
2. Keep the clock enabled for the duration of software/hardware topology
change so that any additional enable/disable calls don't try to change
the hardware state. Once the topology change is complete, the clock can
be put back in its original enable state.
Option (1) is not an acceptable solution since the set_parent() ops might
need to sleep.
Therefore, this patch implements option (2).
This patch doesn't violate any API semantics. clk_disable() doesn't
guarantee that the clock is actually disabled. So, no clients of a clock
can assume that a clock is disabled after their last call to clk_disable().
So, enabling the clock during a parent change is not a violation of any API
semantics.
This also has the nice side effect of simplifying the error handling code.
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed up whitespace issue]
When the si5351 driver is a kernel module, it is loaded into memory
from its i2c device IDs, but not from its DT compatible properties.
This patch declares the i2c device IDs of all chip variants.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The A13 has a lot less clocks than the one found in the Allwinner A10.
Add these stripped down clocks to the clock driver and in the
documentation.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Change soc-audio related clk_register_clkdev() device names to reflect
the ones actually used in current snd-soc-mop500 and ab8500-codec
drivers.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch adds platform data and DT bindings to allow to overwrite
the stored disabled state for each clock output.
Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This adds the clock driver for Freescale PowerPC corenet
series SoCs using common clock infrastructure.
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
- Move clock registration to the device tree
- Support probing the MTU timer from the device tree
- Register user LED and user key in the device tree
- Update defconfig to account for user LED and user key
- Move pin control mappings to the device tree
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=wHd0
-----END PGP SIGNATURE-----
Merge tag 'nomadik-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
From Linus Walleij:
Device tree patches for the Nomadik machine:
- Move clock registration to the device tree
- Support probing the MTU timer from the device tree
- Register user LED and user key in the device tree
- Update defconfig to account for user LED and user key
- Move pin control mappings to the device tree
* tag 'nomadik-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: nomadik: move the pin configuration to DT
ARM: nomadik: add led and key for S8815
ARM: nomadik: register clocksource from device tree
ARM: nomadik: convert all clocks except timer to dt
clocksource: nomadik-mtu: support of probe
Signed-off-by: Olof Johansson <olof@lixom.net>
Migrate the Zynq platform and its drivers to use the new clock
controller driver.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Add a clock controller driver and documentation.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Pull slave-dma fixes from Vinod Koul:
"We have two patches from Andy & Rafael fixing the Lynxpoint dma"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
ACPI / LPSS: register clock device for Lynxpoint DMA properly
dma: acpi-dma: parse CSRT to extract additional resources
The conventional CPU hotplug sequence on the other Tegra chips, we will also
clock gate the CPU in tegra_cpu_kill() after the CPU was power gated. For
Tegra114, the flow controller will clock gate the CPU after the power down
sequence. But we still need to implement a empty function for disable_clock
to avoid kernel warning message.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Refactor the PLL driver so it works with the clock controller driver.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
AC97 controller clock is hardwired to pll_a_out0.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The USB clocks are just clock gates, so no need to set a specific clock.
In fact trying to set a specific clock is just a NOP if the requested
clockrate is the same as those of the parent (clk_m) or will trigger a
WARN_ON() if rates don't match up.
As we are not setting a specific rate, nor activating the clocks at
init, there is no point in keeping the the usb entries in the clock init
table.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The current revision of the datasheet only mentions the gatable clocks
for the PCIe 0.0, 0.1, 0.2 and 0.3 interfaces, and forgot to mention
the ones for the PCIe 1.0, 1.1, 1.2, 1.3, 2.0 and 3.0
interfaces. After confirmation with Marvell engineers, this patch adds
the missing gatable clocks for those PCIe interfaces.
It also changes the name of the previously existing PCIe gatable
clocks, in order to match the naming using the datasheets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Armada 370 has two gatable clocks for each PCIe interface, and we
want both of them to be enabled. We therefore make one of the two
clocks a child of the other, as we did for the sataX and sataXlnk
clocks on Armada XP.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To
work properly it is using the LPSS root clock as a functional clock. That's why
we have to register the clock device accordingly to the ACPI ID of the DMA
controller. The acpi_lpss.c module is responsible to do the job.
This patch also removes hardcoded name of the DMA device in clk-lpt.c and the
name of the root clock in acpi_lpss.c.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This switches the Nomadik platform to also registering its
clocksource from the device tree, removing unused support
code as we go along.
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This moves all Nomadik clocks except the one used for the
timer/clocksource over to the device tree.
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These continue the multiplatform support for exynos, adding support
for building most of the essential drivers (clocksource, clk, irqchip)
when combined with other platforms. As a result, it should become
really easy to add full multiplatform exynos support in 3.11, although
we don't yet enable it for 3.10.
The changes were not included in the earlier multiplatform series
in order to avoid clashes with the other Exynos updates.
This also includes work from Tomasz Figa to fix the pwm clocksource
code on Exynos, which is not strictly required for multiplatform,
but related to the other patches in this set and needed as a bug
fix for at least one board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=FY7+
-----END PGP SIGNATURE-----
Merge tag 'multiplatform-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull late ARM Exynos multiplatform changes from Arnd Bergmann:
"These continue the multiplatform support for exynos, adding support
for building most of the essential drivers (clocksource, clk, irqchip)
when combined with other platforms. As a result, it should become
really easy to add full multiplatform exynos support in 3.11, although
we don't yet enable it for 3.10.
The changes were not included in the earlier multiplatform series in
order to avoid clashes with the other Exynos updates.
This also includes work from Tomasz Figa to fix the pwm clocksource
code on Exynos, which is not strictly required for multiplatform, but
related to the other patches in this set and needed as a bug fix for
at least one board."
* tag 'multiplatform-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
ARM: dts: exynops4210: really add universal_c210 dts
ARM: dts: exynos4210: Add basic dts file for universal_c210 board
ARM: dts: exynos4: Add node for PWM device
ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos
clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core
clocksource: samsung_pwm_timer: Correct programming of clock events
clocksource: samsung_pwm_timer: Use proper clockevents max_delta
clocksource: samsung_pwm_timer: Add support for non-DT platforms
clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct
clocksource: samsung_pwm_timer: Keep all driver data in a structure
clocksource: samsung_pwm_timer: Make PWM spinlock global
clocksource: samsung_pwm_timer: Let platforms select the driver
Documentation: Add device tree bindings for Samsung PWM timers
clocksource: add samsung pwm timer driver
irqchip: exynos: look up irq using irq_find_mapping
irqchip: exynos: pass irq_base from platform
irqchip: exynos: localize irq lookup for ATAGS
irqchip: exynos: allocate combiner_data dynamically
irqchip: exynos: pass max combiner number to combiner_init
ARM: exynos: add missing properties for combiner IRQs
...
These changes are all for board specific files. These used to make up a
large portion of the ARM changes in the past, but as we are generalizing
the support and moving to device tree probing, this has gotten
significantly smaller. The only platform actually adding new code here
at the moment is Renesas shmobile, as they are still busy converting
their code to device tree and have not come far enough to not need it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=2cfP
-----END PGP SIGNATURE-----
Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board specific changes (part 1) from Olof Johansson:
"These changes are all for board specific files. These used to make up
a large portion of the ARM changes in the past, but as we are
generalizing the support and moving to device tree probing, this has
gotten significantly smaller.
The only platform actually adding new code here at the moment is
Renesas shmobile, as they are still busy converting their code to
device tree and have not come far enough to not need it."
* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: msm: USB_MSM_OTG needs USB_PHY
ARM: davinci: da850 evm: fix const qualifier placement
ARM: davinci: da850 board: add remoteproc support
ARM: pxa: move debug uart code
ARM: pxa: select PXA935 on saar & tavorevb
ARM: mmp: add more compatible names in gpio driver
ARM: pxa: move PXA_GPIO_TO_IRQ macro
ARM: pxa: remove cpu_is_xxx in gpio driver
ARM: Kirkwood: update Network Space Mini v2 description
ARM: Kirkwood: DT board setup for CloudBox
ARM: Kirkwood: sort board entries by ASCII-code order
ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor
omap2+: Remove useless Makefile line
omap2+: Remove useless Makefile line
ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d
ARM: OMAP1: fix omap_udc registration
ARM: davinci: use is IS_ENABLED macro
ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig
...
This is a rather large set of patches for device drivers that for one
reason or another the subsystem maintainer preferred to get merged
through the arm-soc tree. There are both new drivers as well as
existing drivers that are getting converted from platform-specific
code into standalone drivers using the appropriate subsystem
specific interfaces.
In particular, we can now have pinctrl, clk, clksource and irqchip
drivers in one file per driver, without the need to call into
platform specific interface, or to get called from platform specific
code, as long as all information about the hardware is provided
through a device tree.
Most of the drivers we touch this time are for clocksource. Since
now most of them are part of drivers/clocksource, I expect that we
won't have to touch these again from arm-soc and can let the
clocksource maintainers take care of these in the future.
Another larger part of this series is specific to the exynos platform,
which is seeing some significant effort in upstreaming and
modernization of its device drivers this time around, which
unfortunately is also the cause for the churn and a lot of the
merge conflicts.
There is one new subsystem that gets merged as part of this series:
the reset controller interface, which is a very simple interface
for taking devices on the SoC out of reset or back into reset.
Patches to use this interface on i.MX follow later in this merge
window, and we are going to have other platforms (at least tegra
and sirf) get converted in 3.11. This will let us get rid of
platform specific callbacks in a number of platform independent
device drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=ZWk9
-----END PGP SIGNATURE-----
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver changes from Olof Johansson:
"This is a rather large set of patches for device drivers that for one
reason or another the subsystem maintainer preferred to get merged
through the arm-soc tree. There are both new drivers as well as
existing drivers that are getting converted from platform-specific
code into standalone drivers using the appropriate subsystem specific
interfaces.
In particular, we can now have pinctrl, clk, clksource and irqchip
drivers in one file per driver, without the need to call into platform
specific interface, or to get called from platform specific code, as
long as all information about the hardware is provided through a
device tree.
Most of the drivers we touch this time are for clocksource. Since now
most of them are part of drivers/clocksource, I expect that we won't
have to touch these again from arm-soc and can let the clocksource
maintainers take care of these in the future.
Another larger part of this series is specific to the exynos platform,
which is seeing some significant effort in upstreaming and
modernization of its device drivers this time around, which
unfortunately is also the cause for the churn and a lot of the merge
conflicts.
There is one new subsystem that gets merged as part of this series:
the reset controller interface, which is a very simple interface for
taking devices on the SoC out of reset or back into reset. Patches to
use this interface on i.MX follow later in this merge window, and we
are going to have other platforms (at least tegra and sirf) get
converted in 3.11. This will let us get rid of platform specific
callbacks in a number of platform independent device drivers."
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
irqchip: s3c24xx: add missing __init annotations
ARM: dts: Disable the RTC by default on exynos5
clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
ARM: exynos: restore mach/regs-clock.h for exynos5
clocksource: exynos_mct: fix build error on non-DT
pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
reset: NULL deref on allocation failure
reset: Add reset controller API
dt: describe base reset signal binding
ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
ARM: EXYNOS: Enable PMUs for exynos4
irqchip: exynos-combiner: Correct combined IRQs for exynos4
irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
ARM: EXYNOS: fix compilation error introduced due to common clock migration
clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
clk: exynos4: export clocks required for fimc-is
clk: samsung: Fix compilation error
clk: tegra: fix enum tegra114_clk to match binding
...
More multiplatform enablement for ARM platforms. The ones converted in
this branch are:
- bcm2835
- cns3xxx
- sirf
- nomadik
- msx
- spear
- tegra
- ux500
We're getting close to having most of them converted!
One of the larger platforms remaining is Samsung Exynos, and there are
a bunch of supporting patches in this merge window for it. There was a
patch in this branch to a early version of multiplatform conversion,
but it ended up being reverted due to need of more bake time. The
revert commit is part of the branch since it would have required
rebasing multiple dependent branches and they were stable by then.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=4hSo
-----END PGP SIGNATURE-----
Merge tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC multiplatform updates from Olof Johansson:
"More multiplatform enablement for ARM platforms. The ones converted
in this branch are:
- bcm2835
- cns3xxx
- sirf
- nomadik
- msx
- spear
- tegra
- ux500
We're getting close to having most of them converted!
One of the larger platforms remaining is Samsung Exynos, and there are
a bunch of supporting patches in this merge window for it. There was
a patch in this branch to a early version of multiplatform conversion,
but it ended up being reverted due to need of more bake time. The
revert commit is part of the branch since it would have required
rebasing multiple dependent branches and they were stable by then"
* tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
clocksource: nomadik-mtu: fix up clocksource/timer
Revert "ARM: exynos: enable multiplatform support"
ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
ARM: exynos: enable multiplatform support
rtc: s3c: make header file local
mtd: onenand/samsung: make regs-onenand.h file local
thermal/exynos: remove unnecessary header inclusions
mmc: sdhci-s3c: remove platform dependencies
ARM: samsung: move mfc device definition to s5p-dev-mfc.c
ARM: exynos: move debug-macro.S to include/debug/
ARM: exynos: prepare for sparse IRQ
ARM: exynos: introduce EXYNOS_ATAGS symbol
ARM: tegra: build assembly files with -march=armv7-a
ARM: Push selects for TWD/SCU into machine entries
ARM: ux500: build hotplug.o for ARMv7-a
ARM: ux500: move to multiplatform
ARM: ux500: make remaining headers local
ARM: ux500: make irqs.h local to platform
ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
...
This branch contains platform updates for 3.10. Among the highlights:
- Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
- New support for CSR SiRFatlas6 SoCs
- A handful of updates for NVidia T114 (a.k.a. Tegra 4)
- A bunch of updates for the shmobile platforms
- A handful of updates for davinci
- A few updates for Qualcomm MSM
- Plus a handful of other patches, defconfig updates, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=HXX3
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"This branch contains part 1 of the platform updates for 3.10. Among
the highlights:
- Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
- New support for CSR SiRFatlas6 SoCs
- A handful of updates for NVidia T114 (a.k.a. Tegra 4)
- A bunch of updates for the shmobile platforms
- A handful of updates for davinci
- A few updates for Qualcomm MSM
- Plus a handful of other patches, defconfig updates, etc."
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits)
ARM: tegra: pm: fix build error w/o PM_SLEEP
ARM: davinci: ensure global variables are declared
ARM: davinci: sram.c: fix incorrect type in assignment
ARM: davinci: da8xx dt: make file local symbols static
ARM: davinci: da8xx: add remoteproc support
ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries
ARM: socfpga: Add clock entries into device tree
ARM: socfpga: Enable soft reset
ARM: EXYNOS: replace cpumask by the corresponding macro
ARM: EXYNOS: handle properly the return values
ARM: EXYNOS: factor out the idle states
ARM: OMAP4: Enable fix for Cortex-A9 erratas
ARM: OMAP2+: Export SoC information to userspace
ARM: OMAP2+: SoC name and revision unification
ARM: OMAP2+: Move common part of late init into common function
ARM: tegra: pm: remove duplicated include from pm.c
ARM: davinci: da850: override mmc DT node device name
ARM: davinci: da850: add mmc DT entries
mmc: davinci_mmc: add DT support
ARM: SAMSUNG: check processor type before cache restoration in resume
...
Here is a collection of cleanup patches. Among the pieces that stand out are:
- The deletion of h720x platforms
- Split of at91 non-dt platforms to their own Kconfig file to keep them separate
- General cleanups and refactoring of i.MX and MXS platforms
- Some restructuring of clock tables for OMAP
- Convertion of PMC driver for Tegra to dt-only
- Some renames of sunxi -> sun4i (Allwinner A10)
- ... plus a bunch of other stuff that I haven't mentioned
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=xCAx
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanup from Olof Johansson:
"Here is a collection of cleanup patches. Among the pieces that stand
out are:
- The deletion of h720x platforms
- Split of at91 non-dt platforms to their own Kconfig file to keep
them separate
- General cleanups and refactoring of i.MX and MXS platforms
- Some restructuring of clock tables for OMAP
- Convertion of PMC driver for Tegra to dt-only
- Some renames of sunxi -> sun4i (Allwinner A10)
- ... plus a bunch of other stuff that I haven't mentioned"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
ARM: i.MX: remove unused ARCH_* configs
ARM i.MX53: remove platform ahci support
ARM: sunxi: Rework the restart code
irqchip: sunxi: Rename sunxi to sun4i
irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro
clocksource: sunxi: Rename sunxi to sun4i
clocksource: sunxi: make use of CLKSRC_OF
clocksource: sunxi: Cleanup the timer code
ARM: at91: remove trailing semicolon from macros
ARM: at91/setup: fix trivial typos
ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"
ARM: EXYNOS: change the name of USB ohci header
ARM: SAMSUNG: Remove unnecessary code for dma
ARM: S3C24XX: Remove unused GPIO drive strength register definitions
ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412
ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410
ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards
ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC"
ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"
...
Here is a collection of fixes (and some intermixed cleanups) that were
considered less important and thus not included in the later parts of
the 3.9-rc cycle.
It's a bit all over the map, contents wise. A series of ux500 fixes
and cleanups, a bunch of various fixes for OMAP and tegra, and some for
Freescale i.MX and even Qualcomm MSM.
Note that there's also a patch on this branch to globally turn off
-Wmaybe-uninitialized when building with -Os. It's been posted several
times by Arnd and no dissent was raised, but nobody seemed interested
to pick it up. So here it is, as the topmost patch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=bzsu
-----END PGP SIGNATURE-----
Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-critical fixes from Olof Johansson:
"Here is a collection of fixes (and some intermixed cleanups) that were
considered less important and thus not included in the later parts of
the 3.9-rc cycle.
It's a bit all over the map, contents wise. A series of ux500 fixes
and cleanups, a bunch of various fixes for OMAP and tegra, and some
for Freescale i.MX and even Qualcomm MSM.
Note that there's also a patch on this branch to globally turn off
-Wmaybe-uninitialized when building with -Os. It's been posted
several times by Arnd and no dissent was raised, but nobody seemed
interested to pick it up. So here it is, as the topmost patch."
* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
Turn off -Wmaybe-uninitialized when building with -Os
ARM: orion5x: include linux/cpu.h
ARM: tegra: call cpu_do_idle from C code
ARM: u300: fix ages old copy/paste bug
ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7
ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled
ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled
ARM: tegra: fix build error when THUMB2_KERNEL enabled
ARM: msm: Fix uncompess.h tx underrun check
ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms
ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro
ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
ARM: mach-imx: mach-imx6q: Fix sparse warnings
ARM: mach-imx: src: Include "common.h
ARM: mach-imx: gpc: Include "common.h"
ARM: mach-imx: avic: Staticize *avic_base
ARM: mach-imx: tzic: Staticize *tzic_base
ARM: mach-imx: clk: Include "clk.h"
ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops
...
- ARM big.LITTLE cpufreq driver from Viresh Kumar.
- exynos5440 cpufreq driver from Amit Daniel Kachhap.
- cpufreq core cleanup and code consolidation from Viresh Kumar and
Stratos Karafotis.
- cpufreq scalability improvement from Nathan Zimmer.
- AMD "frequency sensitivity feedback" powersave bias for the ondemand
cpufreq governor from Jacob Shin.
- cpuidle code consolidation and cleanups from Daniel Lezcano.
- ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.
- ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim,
Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.
- ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
Yasuaki Ishimatsu, and Rafael J. Wysocki.
- Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements
from Rafael J. Wysocki and Andy Shevchenko.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQIcBAABAgAGBQJRf8M8AAoJEKhOf7ml8uNsud4P/3cabXP5lDipzibRrpOiONse
puuvIdhtNdMRMc3t1oSDjNH/w/JA51Gc+ICGFAORiyVmqxBc85mpT6J5ibqV7hNd
pCqbKJceoB5PajHZSx22e4wG9O7YN1k3r80p38IfFzA+Ct0KNSuE0ixMEfHKYjiq
p5pXswk6TY3gtBReH9agrafHqDtXw4IMTE0asMuJ+BorPW7vQeiNlrkuA+0qmDuu
26O0Pm2TVkx1ryfTjdM9zSZ9X2G4JuM8rm1/VFZWQJTExwlv3bA2Za1nvQNJlJ99
6JZ0JXfAehcEW2Ye0sqsZ8HSEabDVHM29QvvOszJ5RpBXERiOCHOkhvFleCoTpn0
Xq0rtXPrLMH1G28Ej+cxmsAjfzOLV2Byg30CAoI/GCLuQ+xh+VMCpuNYQuld25CG
9rtYd0fWESeYsAebhDcX0E3xyzJtbrHtOb9PyGwNkbAJ8YQfhVSMCOPi2SX2wa+Q
qXLXi2VaHvjBSUKcAv5BmM+Ya57Be+88D0LxbgXbUeOnYefUK1ljldKDDshkMjgG
P4LPdm4JpoB5ncXSOO1Dz9w9QnNcFexSUySd/TtKLNMha1vEHV8ISzNPYY+9IdXf
XN0VZbFnUDzdj+Fwna7zyFb1cGihDYJKAtpXvRd8Y6RGUxKx9uGLAFJZw/xZB/cR
KZKuML5O8MgJuef37F38
=H/se
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael J Wysocki:
- ARM big.LITTLE cpufreq driver from Viresh Kumar.
- exynos5440 cpufreq driver from Amit Daniel Kachhap.
- cpufreq core cleanup and code consolidation from Viresh Kumar and
Stratos Karafotis.
- cpufreq scalability improvement from Nathan Zimmer.
- AMD "frequency sensitivity feedback" powersave bias for the ondemand
cpufreq governor from Jacob Shin.
- cpuidle code consolidation and cleanups from Daniel Lezcano.
- ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.
- ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.
- ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
Yasuaki Ishimatsu, and Rafael J Wysocki.
- Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
Rafael J Wysocki and Andy Shevchenko.
* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
cpufreq: Revert incorrect commit 5800043
cpufreq: MAINTAINERS: Add co-maintainer
cpuidle: add maintainer entry
ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
ARM: s3c64xx: cpuidle: use init/exit common routine
cpufreq: pxa2xx: initialize variables
ACPI: video: correct acpi_video_bus_add error processing
SH: cpuidle: use init/exit common routine
ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
ACPI: Fix wrong parameter passed to memblock_reserve
cpuidle: fix comment format
pnp: use %*phC to dump small buffers
isapnp: remove debug leftovers
ARM: imx: cpuidle: use init/exit common routine
ARM: davinci: cpuidle: use init/exit common routine
ARM: kirkwood: cpuidle: use init/exit common routine
ARM: calxeda: cpuidle: use init/exit common routine
ARM: tegra: cpuidle: use init/exit common routine for tegra3
ARM: tegra: cpuidle: use init/exit common routine for tegra2
ARM: OMAP4: cpuidle: use init/exit common routine
...
existing platforms, as well as adoption of the framework by new
platforms and devices. Some long-needed fixes to the core framework are
here as well as new features such as improved initialization of clocks
from DT as well as framework reentrancy for nested clock operations.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=+LO3
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus-3.10' of git://git.linaro.org/people/mturquette/linux
Pull clock framework update from Michael Turquette:
"The common clock framework changes for 3.10 include many fixes for
existing platforms, as well as adoption of the framework by new
platforms and devices.
Some long-needed fixes to the core framework are here as well as new
features such as improved initialization of clocks from DT as well as
framework reentrancy for nested clock operations."
* tag 'clk-for-linus-3.10' of git://git.linaro.org/people/mturquette/linux: (44 commits)
clk: add clk_ignore_unused option to keep boot clocks on
clk: ux500: fix mismatched types
clk: vexpress: Add separate SP810 driver
clk: si5351: make clk-si5351 depend on CONFIG_OF
clk: export __clk_get_flags for modular clock providers
clk: vt8500: Missing breaks in vtwm_pll_round_rate/_set_rate.
clk: sunxi: Unify oscillator clock
clk: composite: allow fixed rates & fixed dividers
clk: composite: rename 'div' references to 'rate'
clk: add si5351 i2c common clock driver
clk: add device tree fixed-factor-clock binding support
clk: Properly handle notifier return values
clk: ux500: abx500: Define clock tree for ab850x
clk: ux500: Add support for sysctrl clocks
clk: mvebu: Fix valid value range checking for cpu_freq_select
clk: Fixup locking issues for clk_set_parent
clk: Fixup errorhandling for clk_set_parent
clk: Restructure code for __clk_reparent
clk: sunxi: drop an unnecesary kmalloc
clk: sunxi: drop CLK_IGNORE_UNUSED
...
Merging in fixes since there's a conflict in the omap4 clock tables caused by
it.
* fixes: (245 commits)
ARM: highbank: fix cache flush ordering for cpu hotplug
ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
arm: mvebu: Fix the irq map function in SMP mode
Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller
ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
ARM i.MX6: Fix ldb_di clock selection
ARM: imx: provide twd clock lookup from device tree
ARM: imx35 Bugfix admux clock
ARM: clk-imx35: Bugfix iomux clock
+ Linux 3.9-rc6
Signed-off-by: Olof Johansson <olof@lixom.net>
Conflicts:
arch/arm/mach-omap2/cclock44xx_data.c
This is primarily useful when there's a driver that doesn't claim clocks
properly, but the bootloader leaves them on. It's not expected to be used
in normal cases, but for bringup and debug it's very useful to have the
option to not gate unclaimed clocks that are still on.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed up trivial merge issue]
* acpi-lpss:
ACPI / LPSS: make code less confusing for reader
ACPI / LPSS: Add support for exposing LTR registers to user space
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices
commit 688f7d8c9f ("clk: exynos5250: Fix divider values for
sclk_mmc{0,1,2,3}") incorrectly sets the divider for sclk_mmc{0,1,2,3}
to fix the wrong clock value. Though this fixed issue with Arndale,
it created regressions for other boards like Snow.
On Exynos5250, sclk_mmc<n> is generated like below (as per the clock
names in drivers/clk/samsung/clk-exynos5250.c)
mout_group1_p ==> mout_mmc<n> ==>
div_mmc<n> ==> div_mmc_pre<n> => sclk_mmc<n>
Earlier div_mmc<n> was set as the parent for sclk_mmc<n>, hence
div_mmc_pre<n> was not getting referred in kernel code and depending
on its value set during preboot, sclk_mmc<n> value was different for
various boards.
Setting the correct clock generation path should fix the issues
reported in above referenced commit. The changes committed during the
earlier patch has also been reverted here.
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
As reported by Rob Herring[1] there were some mismatched types between
drivers/clk/ux500/clk.h and the corresponding function definitions:
drivers/clk/ux500/clk-prcc.c:145:13: error: conflicting types for 'clk_reg_prcc_pclk'
drivers/clk/ux500/clk-prcc.c:155:13: error: conflicting types for 'clk_reg_prcc_kclk'
[1] http://article.gmane.org/gmane.linux.ports.arm.kernel/232246
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Rob Herring <robherring2@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
This series contains the final pieces for Exynos multiplatform support:
Most of the patches are about the exynos-combiner irqchip, which is
converted to not rely on platform provided constants.
* samsung/exynos-multiplatform-drivers:
ARM: exynos: restore mach/regs-clock.h for exynos5
irqchip: exynos: look up irq using irq_find_mapping
irqchip: exynos: pass irq_base from platform
irqchip: exynos: localize irq lookup for ATAGS
irqchip: exynos: allocate combiner_data dynamically
irqchip: exynos: pass max combiner number to combiner_init
ARM: exynos: add missing properties for combiner IRQs
clocksource: exynos_mct: remove platform header dependency
clk: exynos: prepare for multiplatform
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Multiple parts of next/drivers are prerequisites for the final
exynos multiplatform changes, so let's pull in the entire branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The new common clock drivers for exynos are using compile
time constants and soc_is_exynos* macros to provide backwards
compatibility for pre-DT systems, which is not possible with
multiplatform kernels. This moves all the necessary
information back into platform code and removes the mach/*
header inclusions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Turquette <mturquette@linaro.org>
Factor out the SP810 clocking code into a separate driver,
selecting better (faster) parent at clk_prepare() time.
This is to avoid problems with clocking infrastructure
initialisation order, in particular to avoid dependency
of fixed clock being initialized before SP810. It also
makes vexpress platform OF-based clock initialisation code
unnecessary.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: add .unprepare, FIXME comment, cleaned up code]
Calling clk-si5351 driver non-OF ready was too early. This patch
makes clk-si5351 depend on CONFIG_OF again, until things get sorted out.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed spelling of Stephen's name]
The common clock api provides some helpers for clk-providers but does
not export these helpers. This hinders clk-providers to be built as modules.
This patch adds __clk_get_flags() to the list of exported symbols.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
With this patch, the socfpga clk driver is able to query the clock and clock
rates appropriately.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
The case of PLL_TYPE_WM8750 in both these functions is missing a break
statement causing a fall-through to the default: case.
Insert the missing break statements.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This commit uses the new fixed-rate support on the composite clock to
unify osc24M_fixed and osc24M clocks, so it matches the actual hardware.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: replace clk_register_gatable_osc with a call to
clk_register_composite]
The composite clock assumes that any clock implementing the .recalc_rate
callback will also implement .round_rate and .set_rate. This is not
always true; the basic fixed-rate clock will only implement .recalc_rate
and a fixed-divider clock may choose to implement .recalc_rate and
.round_rate but not .set_rate.
Fix this by conditionally registering .round_rate and .set_rate
callbacks based on the rate_ops passed in to clk_composite_register.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Rename all div_hw and div_ops related variables and functions to use
rate_hw, rate_ops, etc. This is to make the rate-change portion of the
composite clk implementation more generic. A patch following this one
will allow for fixed-rate clocks to reuse this infrastructure.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch adds a common clock driver for Silicon Labs Si5351a/b/c
i2c programmable clock generators. Currently, the driver does not
support VXCO feature of si5351b. Passing platform_data or DT bindings
selectively allows to overwrite stored Si5351 configuration which is
very helpful for clock generators with empty eeprom configuration.
Corresponding device tree binding documentation is also added.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Michal Bachraty <michal.bachraty@streamunlimited.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add support for DT "fixed-factor-clock" binding to the common fixed
factor clock support.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Bringin in clk subsystem dependencies needed by sunxi.
* depends/clk-for-3.10: (26 commits)
clk: sunxi: drop an unnecesary kmalloc
clk: sunxi: drop CLK_IGNORE_UNUSED
clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates
clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag
clk: mvebu: Use common of_clk_init() function
clk: fix clk_mux::flags kerneldoc
clk: allow reentrant calls into the clk framework
clk: abstract locking out into helper functions
clk: zynq: Add missing zynq clk header
clk: sunxi: rename compatible strings
arm: sunxi: Add useful information about sunxi clocks
clk: arm: sunxi: Add a new clock driver for sunxi SOCs
clk: ux500: Fix prcmu clocks registration
ARM: imx: adapt clk_busy_mux to new clk_mux struct
clk: Add composite clock type
clk: add table lookup to mux
clk: Fix incorrect return type in clk.c
clk: prima2: fix return value check in sirfsoc_of_clk_init()
clk:SPEAr1340: Correct parent clock configuration
documentation: clk: fix couple of misspelling
...
Avoid to use cpu_is_xxx() in pxa gpio driver. Use platform_device_id
to identify the difference.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Notifiers may return NOTIFY_(OK|DONE|STOP|BAD). The CCF uses an
inconsistent mix of checking against NOTIFY_STOP or NOTIFY_BAD.
This inconsistency leaves errors undetected in some cases:
clk_set_parent() calls __clk_speculate_rates(), which stops when it
hits a NOTIFIER_BAD (STOP is ignored), and passes this value back to the
caller.
clk_set_parent() compares this return value against NOTIFY_STOP only,
ignoring NOTIFY_BAD returns.
Use NOTIFY_STOP_MASK to detect a negative notifier return value and
document all four return value options.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The patch setups the first version of the clock tree for ab850x, which
is used by u8500 platforms. Mainly sysctrl clocks are used.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The abx500 sysctrl clocks are using the ab8500 sysctrl driver to
modify the clock hardware. Sysctrl clocks are represented by a
ab8500 sysctrl register and with a corresponding bitmask.
The sysctrl clocks are slow path clocks, which means clk_prepare
and clk_unprepare will be used to gate|ungate these clocks.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This branch converts Tegra to support multi-platform/single-zImage.
One header is made accessible to drivers. The earlyprintk implementation
is moved to the multi-platform location. Some Kconfig changes are made
to enable multi-platform. Some dead files are deleted.
The APIs exposed in the now-global tegra-powergate.h should be replaced
with standard reset and power domain APIs in the future.
This branch is based on (part of) the previous soc pull request.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=6+gD
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/multiplatform
From Stephen Warren <swarren@wwwdotorg.org>:
ARM: tegra: multi-platform conversion
This branch converts Tegra to support multi-platform/single-zImage.
One header is made accessible to drivers. The earlyprintk implementation
is moved to the multi-platform location. Some Kconfig changes are made
to enable multi-platform. Some dead files are deleted.
The APIs exposed in the now-global tegra-powergate.h should be replaced
with standard reset and power domain APIs in the future.
This branch is based on (part of) the previous soc pull request.
* tag 'tegra-for-3.10-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: convert to multi-platform
ARM: tegra: move <mach/powergate.h> to <linux/tegra-powergate.h>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
information. Also enable few HW errata workarounds for omap4.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRY1HIAAoJEBvUPslcq6VzAjgP/2nbQFegPSVWTSknj3c6q/Ko
uAdfxRL/wW9NYBqLtb/+ErX8jP8J9+vR8z2NKuFZTGLMH1PiNjEkN9HVoKhX8mEn
84S8pcSwM+8fMiJgwxGmY9Np13Lsm5YWJDr4QkrX4vOmqj/s766lMgMWJjkPg01D
pJw9QTXlXilZBIzoPrKXreLVc7Tw4cquKbqpgfJta+vRocKwofddpUWv1yJ8jCtc
8a0ey70NDNFnp+QSd8yaDJx4pvw8S+B4cmc+g+15euPlzZFbktXdPv2KCiW8B+/3
h+HYKxtJcsxcXg4Syz/WrG5nycOHAiSLkhNAiYY/9sQTWlL+68e9I6NF6Nv+QsgI
cPqbHhJbVTet7+FM9b05Aw/biyUlVdC8LGhFdho6z7Y7HjyvsaIXl8cW6P3qKaFz
uSRxDQQ2O76qjxXKY7R3Nlw96JeQ37FEfKnaaOZTrDPg5HHtZjkUqre7uCVcHfu4
riCdP47N1r3sumIVk70zX7yHdUAZWBk21/3f/3YkDfvsz7rUeHdp6wXOzOHa1Rc/
YB8oi9h+Q9f7G7T5iqV9AETLOVbv8UXtImy8pzzVyrg2PAhIrEaz/vYG+MmcHaIN
78+LDgdDi9gKlhk0wx1Hl5exf1qJaCN7aufAydzNZXYlyxaIyQnCv8vfxfaCxI54
KfZ4SieUzpm87A/tVqDj
=bKnC
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
From Tony Lindgren <tony@atomide.com>:
Changes needed for enabling SOC_BUS for the SoC revision
information. Also enable few HW errata workarounds for omap4.
* tag 'omap-for-v3.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (236 commits)
ARM: OMAP4: Enable fix for Cortex-A9 erratas
ARM: OMAP2+: Export SoC information to userspace
ARM: OMAP2+: SoC name and revision unification
ARM: OMAP2+: Move common part of late init into common function
Includes an update to Linux 3.9-rc6
Conflicts:
arch/arm/mach-omap2/cclock44xx_data.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
From Linus Walleij <linus.walleij@linaro.org>:
Ux500 multiplatform support. This tag builds upon the MFD-specific base
tag "ux500-multiplatform-mfd". This removes all <mach/*> dependencies
and makes the ux500 fully multi-platform.
* tag 'ux500-multiplatform-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: build hotplug.o for ARMv7-a
ARM: ux500: move to multiplatform
ARM: ux500: make remaining headers local
ARM: ux500: make irqs.h local to platform
ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
staging: ste_rmi4: kill platform_data hack
ARM: ux500: move mach/msp.h to <linux/platform_data/*>
clk: ux500: pass clock base adresses in init call
ARM: ux500: make debug macro stand-alone
ARM: ux500: move debugmacro to debug includes
ARM: ux500: split out prcmu initialization
mfd: db8500-prcmu: drop unused includes
ARM: ux500: move PM-related PRCMU functions to machine
mfd: db8500-prcmu: get base address from resource
mfd: prcmu: pass a base and size with the early initcall
Conflicts:
arch/arm/Kconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Clean up timer code and move it into drivers/clocksource
* Clean up icoll code and move it into drivers/irqchip
* Clean up clock code to not include <mach/*> headers
* Clean up rtc-stmp3xxx, mxs-lradc and mxs-saif to not include <mach/*>
headers
* Clean up mach-mxs code to get it prepared for multiplatform support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRYnwxAAoJEFBXWFqHsHzOs34H/iSLBv6I+f6oPubu52kJz6fP
ctZPm6ZJPUKIiyVLLcmMf9kMr3h0wWH3XOBDzPdSj0Wtyb+rbpb/qa0jOg2EwZOs
2g+7LpehX2BgqKzdBPQEBC94NuU81F0X7SDZe0YechEWZY1VBGjaDnPso+Ugs23A
7hpjRHAOjd8gnJvkqU/uLKkbJiRX/pvXDcxkRhu15HsA9v6m18Elpq4FNw1QccLd
06o2M8aVvSL4IYy4Eh8lheUZrPNuyapG3TTjzhbYlPZtvXijFEFWniAQWyq5eGdg
3aiVbv3lCWYyJzFhmv9n6WYGqHthpnxej9ZMsREa1OVjmViDzSTda6vlhJvBOHQ=
=neCB
-----END PGP SIGNATURE-----
Merge tag 'mxs-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup
From Shawn Guo <shawn.guo@linaro.org>:
The mxs cleanup for 3.10:
* Clean up timer code and move it into drivers/clocksource
* Clean up icoll code and move it into drivers/irqchip
* Clean up clock code to not include <mach/*> headers
* Clean up rtc-stmp3xxx, mxs-lradc and mxs-saif to not include <mach/*>
headers
* Clean up mach-mxs code to get it prepared for multiplatform support
* tag 'mxs-cleanup-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (26 commits)
clocksource: mxs_timer: Add semicolon at end of line
ARM: mxs: remove unused headers
ARM: mxs: merge imx23 and imx28 into one machine_desc
ARM: mxs: remove common.h
ARM: mxs: move mxs_get_ocotp() into mach-mxs.c
ARM: mxs: remove mm.c
ARM: mxs: use debug_ll_io_init for low-level debug
ARM: mxs: get ocotp base address from device tree
ARM: mxs: remove system.c
ARM: mxs: get reset address from device tree
ARM: mxs: remove empty hardware.h
ASoC: mxs-saif: remove mach header inclusion
iio: mxs-lradc: remove unneeded mach header inclusion
rtc: stmp3xxx: use stmp_reset_block() instead
clk: mxs: remove the use of mach level IO accessor
clk: mxs: get base address from device tree
ARM: mxs: remove unneeded mach-types.h inclusion
ARM: mxs: move icoll driver into drivers/irqchip
ARM: mxs: call stmp_reset_block() in icoll
ARM: mxs: get icoll base address from device tree
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRWLTrAAoJEHm+PkMAQRiGe8oH/iMy48mecVWvxVZn74Tx3Cef
xmW/PnAIj28EhSPqK49N/Ow6AfQToFKf7AP0ge20KAf5teTq95AY+tH74DAANt8F
BjKXXTZiR5xwBvRkq7CR5wDcCvEcBAAz8fgTEd6SEDB2d2VXFf5eKdKUqt1avTCh
Z6Hup5kuwX+ddtwY2DCBXtp2n6fL0Rm5yLzY1A3OOBye1E7VyLTF7M5BR603Q44P
4kRLxn8+R7jy3hTuZIhAeoS8TKUoBwVk7DmKxEzrhTHZVOmvwE9lEHybRnIyOpd/
k1JnbRbiPsLsCVFOn10SQkGDAIk00lro3tuWP2C1ljERiD/OOh5Ui9nXYAhMkbI=
=q15K
-----END PGP SIGNATURE-----
Merge tag 'v3.9-rc5' into next/cleanup
This is a dependency for the mxs/cleanup branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This branch contains a variety of small build and run-time fixes that
weren't important enough for 3.9.
* Enable CPU errata WARs in secondary reset handler as a preparation
for multi-platform support, and a related fix.
* Don't touch DBLGAR in reset/resume handlers, so enable the code to
run on A15 cores.
* Minor build fixes.
* A fix to the Tegra clock driver.
* Some error-handling fixes.
This branch is based on the previous fixes-for-mmc pull request.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=5rB4
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/fixes-non-critical
From Stephen Warren <swarren@wwwdotorg.org>:
ARM: tegra: minor fixes
This branch contains a variety of small build and run-time fixes that
weren't important enough for 3.9.
* Enable CPU errata WARs in secondary reset handler as a preparation
for multi-platform support, and a related fix.
* Don't touch DBLGAR in reset/resume handlers, so enable the code to
run on A15 cores.
* Minor build fixes.
* A fix to the Tegra clock driver.
* Some error-handling fixes.
This branch is based on the previous fixes-for-mmc pull request.
* tag 'tegra-for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: powergate: Don't error out if new state == old state
ARM: tegra: Export tegra_powergate_sequence_power_up()
memory: tegra30: Fix build error w/o PM
ARM: tegra: fix ignored return value of regulator_enable
ARM: tegra: fix the logical detection of power on sequence of warm boot CPUs
ARM: tegra: Fix unchecked return value
ARM: tegra: don't unlock MMIO access to DBGLAR
clk: tegra: No 7.1 super clk dividers on Tegra20
ARM: tegra: remove save/restore of CPU diag register
ARM: tegra: add CPU errata WARs to Tegra reset handler
ARM: dts: tegra: fix the activate polarity of cd-gpio in mmc host
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
cpu_freq_select is used as array subscript, thus the valid value range
is 0 ... ARRAY_SIZE() - 1.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed up trivial merge issues]
Updating the clock tree topology must be protected with the spinlock
when doing clk_set_parent, otherwise we can not handle the migration
of the enable_count in a safe manner.
While issuing the .set_parent callback to make the clk-hw perform the
switch to the new parent, we can not hold the spinlock since it is must
be allowed to be slow path. This complicates error handling, but is still
possible to achieve.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Fixup the broken feature of allowing reparent of a clk to the
orhpan list and vice verse. When operating on a single-parent
clk, the .set_parent callback for the clk hw is optional to
implement, but for a multi-parent clk it is mandatory.
Moreover improve the errorhandling by verifying the prerequisites
before triggering clk notifiers. This will prevent unnecessary
rollback with ABORT_RATE_CHANGE.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Split __clk_reparent into three pieces, one for doing the actual
reparent for updating the clock tree topology, one for the
COMMON_CLK_DEBUG code and one for doing the rate recalculation.
This patch also makes it possible to hold the spinlock over the
update of the clock tree topology, which could not be done before
when both debugfs updates and clock rate updates was done within
the same function.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
of these fixes are needed to support omap5 es2 version that includes
PM features while the earlier version es1 did not.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=mjWl
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.10/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
From Tony Lindgren <tony@atomide.com>:
Non critical omap fixes for v3.10 merge window. A big chunk
of these fixes are needed to support omap5 es2 version that includes
PM features while the earlier version es1 did not.
* tag 'omap-for-v3.10/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass
ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0
ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag
ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk
ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry
Contains an update to 3.9-rc5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In legacy setup, sclk_mmc{0,1,2,3} used PRE_RATIO bit-field (8-bit wide)
instead of RATIO bit-field (4-bit wide) for dividing clock rate.
With current common clock setup, we are using RATIO bit-field which
is creating FIFO read errors while accessing eMMC. Changing over to
use PRE_RATIO bit-field fixes this issue.
dwmmc_exynos 12200000.dwmmc0: data FIFO error (status=00008020)
mmcblk0: error -5 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 1
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
CC: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch adds clock indexes for ACLK_DIV0, ACLK_DIV1,
ACLK_400_MCUISP, ACLK_MCUISP_DIV0, ACLK_MCUISP_DIV1,
DIVACLK_400_MCUISP and DIVACLK_200 so these clocks are
available to the consumers (Exynos4x12 FIMC-IS subsystem).
While at it, indentation of the mux clocks table is
corrected.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Fixes the below compilation error during non-dt build.
drivers/clk/samsung/clk.c: In function 'samsung_clk_of_register_fixed_ext':
drivers/clk/samsung/clk.c:252:2: error: implicit declaration of function 'for_each_matching_node_and_match' [-Werror=implicit-function-declaration]
drivers/clk/samsung/clk.c:252:60: error: expected ';' before '{' token
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This removes <mach/hardware.h> and <mach/db8500-regs.h>
from the Ux500, merging them into the local include
"db8500-regs.h" in mach-ux500. There is some impact
outside the ux500 machine, but most of it is dealt with
in earlier patches.
Contains portions of a clean-up patch from Arnd Bergmann.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ux500 clock driver was including <mach/db8500-regs.h>
which will not work when building for multiplatform support
since <mach/*> is going away.
Pass the base adresses in the init call instead.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A gap exists in the binding's clock ID definitions. Fix the clock driver
to be consistent. This allows pclk to be looked up through device tree
and prevents:
ERROR: could not get clock /pmc:pclk(0)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The UART driver enables the console uart clock, so we don't need to do that
anymore in this file.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Implement clocks for Tegra114.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Workaround a hardware bug in MSENC during clock enable.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
We will need some tegra peripheral clocks with the CLK_IGNORE_UNUSED flag,
most notably mselect, which is a bridge between AXI and most peripherals.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tegra114 introduces new PLL types. This requires new clocktypes as well
as some new fields in the pll structure.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
PLLC2 and PLLC3 on Tegra114 have separate phaselock and frequencylock bits.
So switch to a lock mask to be able to test both at the same time.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Some PLLs in Tegra114 don't use a power of 2 mapping for the post divider.
Introduce a table based approach and switch PLLU to it.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tegra114 PLLC2 and PLLC3 don't have a lock enable bit. The lock bits are
always functional.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Not all PLLs in Tegra114 have a bypass bit. Adapt the common code to only use
this bit when available.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Refactor the PLL programming code to make it useable by the new PLL types
introduced by Tegra114.
The following changes were done:
* Split programming the PLL into updating m,n,p and updating cpcon
* Move locking from _update_pll_cpcon() to clk_pll_set_rate()
* Introduce _get_pll_mnp() helper
* Move check for identical m,n,p values to clk_pll_set_rate()
* struct tegra_clk_pll_freq_table will always contain the values as defined
by the hardware.
* Simplify the arguments to clk_pll_wait_for_lock()
* Split _tegra_clk_register_pll()
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
tegra_boot_secondary() relies on some of the car ops. This means having an
uninitialized tegra_cpu_car_ops will lead to an early boot panic.
Providing a dummy struct avoids this and makes adding Tegra114 clock support
in a bisectable way a lot easier.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The Tegra clock driver is initialized during the ARM machine descriptor's
.init_irq() hook. It can't be initialized earlier, since dynamic memory
usage is required. It can't be initialized later, since the .init_timer()
hook needs the clocks initialized. However, at this time, udelay()
doesn't work.
The Tegra clock initialization table may enable some PLLs. Enabling a PLL
may require usage of udelay(). Hence, this can't happen right when the
clock driver is initialized.
To solve this, separate the clock driver initialization from the clock
table processing, so they can execute at separate times.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Correct IDs for cdev1 and cdev2 are 94 and 93 respectively.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
[swarren: split into separate driver and device-tree patches]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
By default these clocks are children of pll_m, but in downstream kernels
they are reparented to pll_c. While at it, decrease their frequencies to
300 MHz because the defaults aren't in the specified range.
gr2d can reportedly run at much higher frequencies, but 300 MHz works
and is a more conservative default.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The tegra_periph_reset_assert() and tegra_periph_reset_deassert()
functions can be used by drivers to reset peripherals. In order to allow
such drivers to be built as modules, export the functions.
Note that this restores the status quo as the functions were exported
before the move to the drivers/clk tree.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The parameter name should be "gate", not "periph". This worked, however,
because it happens that everywhere periph_clk_to_bit is called, "gate" was
in the local scope.
Signed-off-by: Yen Lin <yelin@nvidia.com>
Signed-off-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
clk_register will copy this information, so we can just use a normal
array and do one less dynamic allocation.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This flag was in place to prevent important clocks from getting gated
while they had no users. Now that the UART driver supports clocks
properly, we can drop this.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patchset adds DT support for all the AXI, AHB, APB0 and APB1
gates present on sunxi SoCs.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add gate clocks for fimd, mie, dsim, dp, mixer and hdmi.
Register it to common clock framework.
Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch extends suspend/resume support for SoC-specific registers to
handle differences in register sets on particular SoCs.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This patch adds missing clock control registers to the list of registers
that should be saved across system suspend.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This register is present on all Exynos4 SoCs and so the prefix is
misleading.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This definition is specific for Exynos4210 (which has another location
than the same register on Exynos4x12 SoCs) and so needs appropriate
prefix.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
