Commit Graph

23990 Commits

Author SHA1 Message Date
Linus Torvalds
49569646b2 Driver core __dev* removal patches
Here are the remaining __dev* removal patches against the 3.8-rc2 tree.
 All of these patches were previously sent to the subsystem maintainers,
 most of them were picked up and pushed to you, but there were a number
 that fell through the cracks, and new drivers were added during the
 merge window, so this series cleans up the rest of the instances of
 these markings.
 
 Third time's the charm...
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDmHOIACgkQMUfUDdst+ykTZgCePgK84Im3FFooEXJwaPbaf4ls
 lO4AoMEDoWK+BHWOsjQwFPOwFFPEN2Xh
 =6oAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core __dev* removal patches - take 3 - from Greg Kroah-Hartman:
 "Here are the remaining __dev* removal patches against the 3.8-rc2
  tree.  All of these patches were previously sent to the subsystem
  maintainers, most of them were picked up and pushed to you, but there
  were a number that fell through the cracks, and new drivers were added
  during the merge window, so this series cleans up the rest of the
  instances of these markings.

  Third time's the charm...

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up trivial conflict with the pinctrl pull in pinctrl-sirf.c.

* tag 'driver-core-3.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
  misc: remove __dev* attributes.
  include: remove __dev* attributes.
  Documentation: remove __dev* attributes.
  Drivers: misc: remove __dev* attributes.
  Drivers: block: remove __dev* attributes.
  Drivers: bcma: remove __dev* attributes.
  Drivers: char: remove __dev* attributes.
  Drivers: clocksource: remove __dev* attributes.
  Drivers: ssb: remove __dev* attributes.
  Drivers: dma: remove __dev* attributes.
  Drivers: gpu: remove __dev* attributes.
  Drivers: infinband: remove __dev* attributes.
  Drivers: memory: remove __dev* attributes.
  Drivers: mmc: remove __dev* attributes.
  Drivers: iommu: remove __dev* attributes.
  Drivers: power: remove __dev* attributes.
  Drivers: message: remove __dev* attributes.
  Drivers: macintosh: remove __dev* attributes.
  Drivers: mfd: remove __dev* attributes.
  pstore: remove __dev* attributes.
  ...
2013-01-03 16:17:50 -08:00
Greg Kroah-Hartman
351a102dbf ARM: drivers: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:04 -08:00
Linus Walleij
d962117687 ARM: nomadik: bump the IRQ numbers again
Bump the IRQ numbers from offset at 1 (right above NO_IRQ)
to 32. This is the painful way to learn that if you're using
SPARSE_IRQ and avoid to define .nr_irqs in your machine,
the first 16 IRQs will be pre-allocated, and the IRQdomain
code (as the VIC core code before it) will then assume
that all IRQ descriptors are pre-allocated, and 16 of them
are - by somebody else. So mapping the IRQs will fail in
irq_create_mapping(). Moving the offset upward rids us of
this problem.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-03 23:42:07 +01:00
Linus Walleij
7f252b1628 ARM: nomadik: delete dangling include
This reference to the old include header for the FSMC NAND
MTD driver was somehow left in place, get rid of it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-03 23:42:06 +01:00
Linus Torvalds
5f738967e8 A first round of pinctrl fixes for v3.8:
- i.MX5 register configuration
 - Swap a kfree to devm_kfree() to avoid memory
   corruption in the at91 driver
 - Add the missing device tree binding doc for the
   SIRF pin controller
 - Enable the SIRF GPIO pull up/down configuration
   from the device tree, it was previously retired
   from the hard-coded approach.
 - NULL check for the prcm_base in the Nomadik pin
   controller.
 - Provide the prcm_base from the device tree in the
   DT boot path for the Nomadik pin controller.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ4tz9AAoJEEEQszewGV1z/7QQALIrLufIwjzpYwewQVB12kms
 +gcjcv1sDhRmQOwhVuEbFwTzVgGmKBtLHSHX2fAQy61V5sc6xfypURUndvppIoIa
 6s2qaIe464PkTXLH+60qtxF3/A6CqQ/S/B7fqL++Lls3Tt8ecTbox/Hpz5Mn0c7E
 639X7xM/PdFMJyH9c/XL84u2XXWU+slJbnY0O5GLMW9zBrPzflNqUiW67XtfUsVJ
 5PwH5fxw/SLxtIoXgTFzuTMSxAIvL5Wcbf3HnSV5I3R5awxKtvffqsTDxcZkWbSH
 7OfNeqQCD1CD6Yft6L0xKXlOKUjB75Pn3OdmJxmG4nfm+wqYTuhqZDs9rj0QMXK2
 iEDGCQsVLwxDUcbTX/AbxEZS4VUfSkYw6bLP0LpU05oGBCY4NNWgHu+ltIFl82zy
 L6N7Tto9EhZGhJ+0VmlQaC3wqy1pJ8OUwJcPItQtrCLbYyoFTQuSRTPBFCMBDMoi
 zmkIQxeRBLifUzNrfMjdtH7nz66qsisPxjsZtirus8OXZBPz3AjeLG0k+70CWHJ0
 B9vurbHYzSukr8ZVbeJVJJ9XFts9VQlLkwxssVVieadnGtEmDAhNiy+etXyzaWa8
 BBK887H+rkdPTNz51fYgEIgF41rcrOzvCDGoCdyforPSR8QMqDdfwafQA9V76XPA
 M6Gy+m93wXDiTYAhI2kD
 =ca6M
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
 "A first round of pinctrl fixes for v3.8:
   - i.MX5 register configuration
   - Swap a kfree to devm_kfree() to avoid memory corruption in the at91
     driver
   - Add the missing device tree binding doc for the SIRF pin controller
   - Enable the SIRF GPIO pull up/down configuration from the device
     tree, it was previously retired from the hard-coded approach.
   - NULL check for the prcm_base in the Nomadik pin controller.
   - Provide the prcm_base from the device tree in the DT boot path for
     the Nomadik pin controller."

* tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  ARM: ux500: add pinctrl address resources
  pinctrl: nomadik: return if prcm_base is NULL
  pinctrl: sirf: enable GPIO pullup/down configuration from dts
  pinctrl: sirf: add missing DT-binding document
  pinctrl: fix comment mistake
  drivers/pinctrl/pinctrl-at91.c: convert kfree to devm_kfree
  pinctrl: imx5: fix GPIO_8 pad CAN1_RXCAN configuration
2013-01-03 13:10:18 -08:00
Aaro Koskinen
07fd296d3a ARM: OMAP1: fix USB configuration use-after-release
All boards, except Amstrad E3, mark USB config with __initdata.

As a result, when you compile USB into modules, they will try to refer
already released platform data and the behaviour is undefined. For example
on Nokia 770, I get the following kernel panic when modprobing ohci-hcd:

[    3.462158] Unable to handle kernel paging request at virtual address e7fddef0
[    3.477050] pgd = c3434000
[    3.487365] [e7fddef0] *pgd=00000000
[    3.498535] Internal error: Oops: 80000005 [#1] ARM
[    3.510955] Modules linked in: ohci_hcd(+)
[    3.522705] CPU: 0    Not tainted  (3.7.0-770_tiny+ #5)
[    3.535552] PC is at 0xe7fddef0
[    3.546508] LR is at ohci_omap_init+0x5c/0x144 [ohci_hcd]
[    3.560272] pc : [<e7fddef0>]    lr : [<bf003140>]    psr: a0000013
[    3.560272] sp : c344bdb0  ip : c344bce0  fp : c344bdcc
[    3.589782] r10: 00000001  r9 : 00000000  r8 : 00000000
[    3.604553] r7 : 00000026  r6 : 000000de  r5 : c0227300  r4 : c342d620
[    3.621032] r3 : e7fddef0  r2 : c048b880  r1 : 00000000  r0 : 0000000a
[    3.637786] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[    3.655822] Control: 0005317f  Table: 13434000  DAC: 00000015
[    3.672790] Process modprobe (pid: 425, stack limit = 0xc344a1b8)
[    3.690643] Stack: (0xc344bdb0 to 0xc344c000)
[    3.707031] bda0:                                     bf0030e4 c342d620 00000000 c049e62c
[    3.727905] bdc0: c344be04 c344bdd0 c0150ff0 bf0030f4 bf001b88 00000000 c048a4ac c345b020
[    3.748870] bde0: c342d620 00000000 c048a468 bf003968 00000001 bf006000 c344be34 c344be08
[    3.769836] be00: bf001bf0 c0150e48 00000000 c344be18 c00b9bfc c048a478 c048a4ac bf0037f8
[    3.790985] be20: c012ca04 c000e024 c344be44 c344be38 c012d968 bf001a84 c344be64 c344be48
[    3.812164] be40: c012c8ac c012d95c 00000000 c048a478 c048a4ac bf0037f8 c344be84 c344be68
[    3.833740] be60: c012ca74 c012c80c 20000013 00000000 c344be88 bf0037f8 c344beac c344be88
[    3.855468] be80: c012b038 c012ca14 c38093cc c383ee10 bf0037f8 c35be5a0 c049d5e8 00000000
[    3.877166] bea0: c344bebc c344beb0 c012c40c c012aff4 c344beec c344bec0 c012bfc0 c012c3fc
[    3.898834] bec0: bf00378c 00000000 c344beec bf0037f8 00067f39 00000000 00005c44 c000e024
[    3.920837] bee0: c344bf14 c344bef0 c012cd54 c012befc c04ce080 00067f39 00000000 00005c44
[    3.943023] bf00: c000e024 bf006000 c344bf24 c344bf18 c012db14 c012ccc0 c344bf3c c344bf28
[    3.965423] bf20: bf00604c c012dad8 c344a000 bf003834 c344bf7c c344bf40 c00087ac bf006010
[    3.987976] bf40: 0000000f bf003834 00067f39 00000000 00005c44 bf003834 00067f39 00000000
[    4.010711] bf60: 00005c44 c000e024 c344a000 00000000 c344bfa4 c344bf80 c004c35c c0008720
[    4.033569] bf80: c344bfac c344bf90 01422192 01427ea0 00000000 00000080 00000000 c344bfa8
[    4.056518] bfa0: c000dec0 c004c2f0 01422192 01427ea0 01427ea0 00005c44 00067f39 00000000
[    4.079406] bfc0: 01422192 01427ea0 00000000 00000080 b6e11008 014221aa be941fcc b6e1e008
[    4.102569] bfe0: b6ef6300 be941758 0000e93c b6ef6310 60000010 01427ea0 00000000 00000000
[    4.125946] Backtrace:
[    4.143463] [<bf0030e4>] (ohci_omap_init+0x0/0x144 [ohci_hcd]) from [<c0150ff0>] (usb_add_hcd+0x1b8/0x61c)
[    4.183898]  r6:c049e62c r5:00000000 r4:c342d620 r3:bf0030e4
[    4.205596] [<c0150e38>] (usb_add_hcd+0x0/0x61c) from [<bf001bf0>] (ohci_hcd_omap_drv_probe+0x17c/0x224 [ohci_hcd])
[    4.248138] [<bf001a74>] (ohci_hcd_omap_drv_probe+0x0/0x224 [ohci_hcd]) from [<c012d968>] (platform_drv_probe+0x1c/0x20)
[    4.292144]  r8:c000e024 r7:c012ca04 r6:bf0037f8 r5:c048a4ac r4:c048a478
[    4.316192] [<c012d94c>] (platform_drv_probe+0x0/0x20) from [<c012c8ac>] (driver_probe_device+0xb0/0x208)
[    4.360168] [<c012c7fc>] (driver_probe_device+0x0/0x208) from [<c012ca74>] (__driver_attach+0x70/0x94)
[    4.405548]  r6:bf0037f8 r5:c048a4ac r4:c048a478 r3:00000000
[    4.429809] [<c012ca04>] (__driver_attach+0x0/0x94) from [<c012b038>] (bus_for_each_dev+0x54/0x90)
[    4.475708]  r6:bf0037f8 r5:c344be88 r4:00000000 r3:20000013
[    4.500366] [<c012afe4>] (bus_for_each_dev+0x0/0x90) from [<c012c40c>] (driver_attach+0x20/0x28)
[    4.528442]  r7:00000000 r6:c049d5e8 r5:c35be5a0 r4:bf0037f8
[    4.553466] [<c012c3ec>] (driver_attach+0x0/0x28) from [<c012bfc0>] (bus_add_driver+0xd4/0x228)
[    4.581878] [<c012beec>] (bus_add_driver+0x0/0x228) from [<c012cd54>] (driver_register+0xa4/0x134)
[    4.629730]  r8:c000e024 r7:00005c44 r6:00000000 r5:00067f39 r4:bf0037f8
[    4.656738] [<c012ccb0>] (driver_register+0x0/0x134) from [<c012db14>] (platform_driver_register+0x4c/0x60)
[    4.706542] [<c012dac8>] (platform_driver_register+0x0/0x60) from [<bf00604c>] (ohci_hcd_mod_init+0x4c/0x8c [ohci_hcd])
[    4.757843] [<bf006000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c00087ac>] (do_one_initcall+0x9c/0x174)
[    4.808990]  r4:bf003834 r3:c344a000
[    4.832641] [<c0008710>] (do_one_initcall+0x0/0x174) from [<c004c35c>] (sys_init_module+0x7c/0x194)
[    4.881530] [<c004c2e0>] (sys_init_module+0x0/0x194) from [<c000dec0>] (ret_fast_syscall+0x0/0x2c)
[    4.930664]  r7:00000080 r6:00000000 r5:01427ea0 r4:01422192
[    4.956481] Code: bad PC value
[    4.978729] ---[ end trace 58280240f08342c4 ]---
[    5.002258] Kernel panic - not syncing: Fatal exception

Fix this by taking a copy of the data. Also mark Amstrad E3's data with
__initdata to save some memory with multi-board kernels.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 11:31:40 -08:00
Tony Lindgren
2cd1f483b8 Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test
logs are available here:
 
     http://www.pwsan.com/omap/testlogs/prcm_fixes_b_3.8-rc/20130102120724/
 
 The 3730 Beagle XM here has an intermittent failure mounting SD root,
 but the suspicion right now is that this is due to a failing SD card,
 rather than any change introduced by these patches.
 
 This second version includes a few changes requested by Tony Lindgren.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ5IkPAAoJEMePsQ0LvSpL/RQQAJUbGPZTdMEH2DHHDVPRxgBE
 bWEg0RQfzheOLfFvfot2tReJoN7GMlhzcDq2DSHZLwp5b9XgOgOJdNdldvrvFljD
 p3QEy+y/7ZSgsAdgDV33vAAUAv4c0CIh0cKgw3JwOn/dqVSbiMXXqXe1kZe419gi
 bbJHBr6fZH63qvGzkjI17vl3lDq6RsX7vgtEQ9TeiTMUAOnrXzp3rt9oDNVsChSs
 Ml6h1WKnxQdMFjbNNmBOUGltSg7O1rwuWeS/9mg77yV3lIZ5QdmAVlcq6lUB+jqy
 CWhAYbrhXMBPYFaxzw0I8h00m0VNBSOZf2e1d5Lw8wU8dVxQ3PVZCI4SyRssBdd3
 T+91zy4Axmo+SWrkTxpq+yE2Sn1AMZC4mJwI62UhCZV8TPPvek8IlK3ktKeV97ql
 BNehuGYqbc3u5TiIjO8K+akTBKKTVDdXaah9ms8rtQ4hcwLwC0VA/71R9qaQJx3E
 mGf3pRK6FSV83vEMrGb2mRk3ByGHzpYlMD0sb4+0OFvkj5Hyv7OCPb0TJapn6OPO
 vpeG6pIbHN3p/mKrj/RNHVtvpV5/mHJmMOXgkcXLcdlZhsnGE21dqw/vPrvjf3Wa
 SnUp7q48/4a2FP2d0KpQ+CpHyLyNEs4x4zs9hfjHGsYs1fWBwdu0+/8rVPaAEjjB
 iUa8sxlv/1o0rJfiyRkd
 =oUTN
 -----END PGP SIGNATURE-----

Merge tag 'omap-fixes-a2-for-v3.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8-rc2/fixes

Some OMAP PRCM and sparse fixes against v3.8-rc1.  A basic set of test
logs are available here:

    http://www.pwsan.com/omap/testlogs/prcm_fixes_b_3.8-rc/20130102120724/

The 3730 Beagle XM here has an intermittent failure mounting SD root,
but the suspicion right now is that this is due to a failing SD card,
rather than any change introduced by these patches.

This second version includes a few changes requested by Tony Lindgren.
2013-01-03 11:04:21 -08:00
Paul Walmsley
7e7fff8254 ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values
On OMAP2xxx chips, the register bitfields for the
PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED are
different than those used on OMAP3/4.  The order is reversed.  So, for
example, on OMAP2xxx, 0x0 indicates 'ON'; but on OMAP3/4, 0x0
indicates 'OFF'.  Similarly, on OMAP2xxx, 0x3 indicates 'OFF', but on
OMAP3/4, 0x3 indicates 'ON'.

To fix this, we treat the OMAP3/4 values as the powerdomain API
values, and create new low-level powerdomain functions for the
OMAP2xxx chips which translate between the OMAP2xxx values and the
OMAP3/4 values.

Without this patch, the conversion of the OMAP2xxx PM code to the
functional powerstate code results in a non-booting kernel.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02 12:07:16 -07:00
Jon Hunter
cfef4b2723 ARM: OMAP3: clock data: Add missing enable/disable for EMU clock
The ETM/ETB drivers for OMAP3, enable the emu_src_ck clock in order
to access the ETM/ETB hardware. The emu_src_ck should enable the EMU
clock domain so that the ETM/ETB hardware is accessible. However,
currently when enabling the emu_src_ck the EMU clock domain is not
being enabled and so the ETM/ETB drivers are failing. Add enable/disable
clock functions to enable the EMU clock domain when enabling the
emu_src_ck.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02 12:07:16 -07:00
Ivan Khoronzhuk
d7eccab909 ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources
To read reset sources registers we have to use PRM_DEVICE_INST

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02 12:07:16 -07:00
Nishanth Menon
5f2596fc72 ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets
RSTTIME is offset 0x8 and RSTST is offset 0x04 for OMAP4430 and
OMAP4460.

Signed-off-by: Nishanth Menon <nm@ti.com>
[ivan.khoronzhuk@ti.com: ported from k3.4]
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02 12:07:16 -07:00
Ivan Khoronzhuk
62bafd1a8f ARM: OMAP4: PRM: Correct reset source map
In the map for reset sources register we use defines intended for
using with PRM_RSTCTRL register. So fix it.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02 12:07:16 -07:00
Aaro Koskinen
8899b8d93e watchdog: twl4030_wdt: add DT support
Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to
probe when booting with DT.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02 12:07:05 +01:00
Linus Walleij
5ced33bc06 ARM: 7611/1: VIC: fix bug in VIC irqdomain code
The VIC irqdomain code added in commit
07c9249f1f
"ARM: 7554/1: VIC: use irq_domain_add_simple()"

Had two bugs:

1) It didn't call irq_create_mapping() once on each
   valid irq source in the slowpath when registering
   the controller.

2) It passed a -1 as IRQ offset for the DT case, whereas
   0 should be passed as invalid IRQ instead.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-02 10:35:07 +00:00
Linus Walleij
f556529589 ARM: 7610/1: versatile: bump IRQ numbers
The Versatile starts to register Linux IRQ numbers from offset 0
which is illegal, since this is NO_IRQ. Bump all hard-coded IRQs
by 32 to get rid of the problem.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-02 10:35:06 +00:00
Rob Herring
62e4d357aa ARM: 7609/1: disable errata work-arounds which access secure registers
In order to support secure and non-secure platforms in multi-platform
kernels, errata work-arounds that access secure only registers need to
be disabled. Make all the errata options that fit in this category
depend on !CONFIG_ARCH_MULTIPLATFORM.

This will effectively remove the errata options as platforms are
converted over to multi-platform.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-02 10:35:05 +00:00
Rob Herring
74ddcdb868 ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier
PL310 errata work-arounds using .set_debug function are only needed on
r3p0 and earlier, so check the rev and only set .set_debug on older revs.

Avoiding debug register accesses fixes aborts on non-secure platforms
like highbank. It is assumed that non-secure platforms needing these
work-arounds have already implemented .set_debug with secure monitor
calls.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-02 10:34:56 +00:00
Paul Walmsley
9fbe7c2425 ARM: OMAP: SRAM: resolve sparse warnings
Commit bb77209432 ("ARM: OMAP: Move
omap2+ specific parts of sram.c to mach-omap2") adds some new sparse
warnings:

arch/arm/plat-omap/sram.c:43:6: warning: symbol 'omap_sram_push_address' was not declared. Should it be static?
arch/arm/plat-omap/sram.c:65:6: warning: symbol 'omap_sram_reset' was not declared. Should it be static?
arch/arm/plat-omap/sram.c:73:13: warning: symbol 'omap_map_sram' was not declared. Should it be static?

This second version fixes the warnings by including <plat/sram.h>, at
Tony's request.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
2013-01-01 15:42:00 -07:00
Paul Walmsley
9816aa80b0 ARM: OMAP AM33xx: hwmod data: resolve sparse warnings
Commit 70384a6af0 ("ARM: OMAP3+:
hwmod: Add AM33XX HWMOD data for davinci_mdio module") adds two
new sparse warnings:

arch/arm/mach-omap2/omap_hwmod_33xx_data.c:2518:30: warning: symbol 'am33xx_mdio_addr_space' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_data.c:2526:26: warning: symbol 'am33xx_cpgmac0__mdio' was not declared. Should it be static?

Fix by marking the two new records as static.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
2013-01-01 15:41:59 -07:00
Fabio Estevam
236d6ac0a1 ARM: mach-imx: Kconfig: Do not select Babbage for MACH_IMX51_DT
When mx51 dt support was added it was necessary to select MACH_MX51_BABBAGE in
order to get the mx51 dt built without errors.

At that time, there was no pinctrl support for mx51 yet.

Currently there is no need to select MACH_MX51_BABBAGE anymore.

Reported-by: Matt Sealy <matt@genesi-usa.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 08:28:19 +08:00
Linus Torvalds
8d91a42e54 ARM: arm-soc: late cleanups for omap
From Tony Lindgren:
 Here are few more patches to finish the omap changes for
 multiplatform conversion that are not strictly fixes, but
 were too complex to do with the dependencies during the
 merge window. Those are to move of serial-omap.h to
 platform_data, and the removal of remaining cpu_is_omap
 macro usage outside mach-omap2.
 
 Then there are several trivial fixes for typos and few
 minimal omap2plus_defconfig updates.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ3es9AAoJEIwa5zzehBx3bpwP/j4k4mGm4RMLTY9e8KNNxrDW
 FAeU52h91qDONn3EXcF7oSd5IqbDoQRCQx9vn4XBfSm23uOzvP3hOSDe8iIz9t8C
 XdLSXJfJDuYKuEBYxFNOVBdBziZoE7Gtp1JP9s79qfGfQurUfnRQ9gg6zoMMoxMg
 KdVnzFbaCeN/Dgbyq/WToDdOCUv2jeiSNI0gf6oe3Tju0uVjBSmlZUnkbAsRMvOW
 RL2uwp66yS6uLc/w5cfPI/wcp1jRZDYm2E7JB+TmHWqCYx2qpDE5EuDuW5+cY/DR
 RTBr1c0fSl3k3o3iNOEijkFwGShivf1PksesMA+Fx9BrFwtrhtYT/dVZbuS3AjVL
 1vIn3c+8rp3p63EsS1WxAMBvBq3qgqAl2shgow1B3QlXdErB9HNRErFKjU9rJ1ES
 fZgtWkzLtCqFaN/WnQAj0nfooPmrmhaDrbHJd7Bt7g8dfgGBHl9nkmQ4tMAa/z4x
 f/mZ0MxtXwhSUYBDvJ9vvtcNdeo9WmVV5zCfHUiMB7LB4wjxJUf7xMT9AquQUGqj
 H5EkaSyRjWG35293WDmxAOKlAkMP+AH5cuROKNNwNN5+i7ypJC+jrMDcgwfwQoXl
 i0yJeJhzFg9WV9buNB7+uWTA9vz7uveHSeaVXbbTVbuZ+apTgWl+MTsua0C2hhbU
 81k7fmqW2fCWkiw5eUeZ
 =RE6Z
 -----END PGP SIGNATURE-----

Merge tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull late ARM cleanups for omap from Olof Johansson:
 "From Tony Lindgren:

  Here are few more patches to finish the omap changes for multiplatform
  conversion that are not strictly fixes, but were too complex to do
  with the dependencies during the merge window.  Those are to move of
  serial-omap.h to platform_data, and the removal of remaining
  cpu_is_omap macro usage outside mach-omap2.

  Then there are several trivial fixes for typos and few minimal
  omap2plus_defconfig updates."

* tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON
  OMAP2: Fix a typo - replace regist with register.
  ARM/omap: use module_platform_driver macro
  ARM: OMAP2+: PMU: Remove unused header
  ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c
  ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio
  ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support
  ARM: OMAP2+: enable devtmpfs and devtmpfs automount
  ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER
  ARM: OMAP2+: Drop plat/cpu.h for omap2plus
  ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage
  MAINTAINERS: Add an entry for omap related .dts files
2012-12-30 09:59:21 -08:00
Kukjin Kim
b2318482a3 ARM: EXYNOS: enable PINCTRL for EXYNOS5440
This patch removes following warning in kernel boot log,
Because EXYNOS5440 can support only Pinctrl not GPIO.

WARNING: at drivers/gpio/gpio-samsung.c:3102 samsung_gpiolib_init+0x68/0x8c()
Unknown SoC in gpio-samsung, no GPIOs added

Cc: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28 09:36:05 -08:00
Kukjin Kim
3c2bbf51ab ARM: dts: use uart port1 for console on exynos4210-smdkv310
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28 09:35:35 -08:00
Kukjin Kim
ca6f1e42d6 ARM: dts: use uart port0 for console on exynos5440-ssdk5440
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28 09:35:14 -08:00
Kukjin Kim
93f377894b ARM: SAMSUNG: fix the cpu id for EXYNOS5440
The value of CPU ID for EXYNOS5440 should be 0xE5440000.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28 09:35:04 -08:00
Paul Walmsley
6ccc432f70 ARM: OMAP: 32k counter: resolve sparse warnings
Commit 1fe97c8f6a ("ARM: OMAP: Make OMAP
clocksource source selection using kernel param") results in a new warning
from sparse:

arch/arm/plat-omap/counter_32k.c:86:12: warning: symbol 'omap_init_clocksource_32k' was not declared. Should it be static?

This second version fixes this warning by including <plat/counter-32k.h>,
at Tony's request.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2012-12-28 02:09:01 -07:00
Sean Paul
101250ceae ARM: EXYNOS: Revise HDMI resource size
Reduce the HDMI resource size from 0x100000 to 0x70000 so it
doesn't overlap the Displayport resource space.
HDMI: (0x14530000 - 0x145A0000)
DP: (0x145B0000 - 0x145B1000)

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-27 10:35:51 -08:00
Fabio Baltieri
9fcb4cc2d7 ARM: ux500: add pinctrl address resources
Current nmk_pinctrl driver is not PRCMU dependent anymore, so it needs
its own DT address resources to work properly, as done for
platform_device in:

f482833 ARM: ux500: add PRCM register base for pinctrl

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-26 01:59:54 +01:00
Fabio Estevam
664e9e495a ARM: dts: imx23-olinuxino: Fix IOMUX settings
On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17
is the USB PHY reset.

So make the IOMUX assignment properly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-25 22:17:59 +08:00
Maxime Ripard
43880f709d sunxi: Change the machine compatible string.
Commit 68136b10 ("ARM: sunxi: Change device tree naming scheme for
sunxi") changed the naming scheme and the compatible strings used in the
device trees related to the sunXi platform, but forgot to change the
compatible string in the DT machine definition.

This prevents the kernel from booting on these boards.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-12-23 18:20:15 +01:00
Maxime Ripard
7712866ff6 ARM: multi_v7_defconfig: Add ARCH_SUNXI
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-12-23 18:20:11 +01:00
Kukjin Kim
7e65df3899 ARM: dts: fix duplicated build target and alphabetical sort out for exynos
Commit db5b0ae007 ("Merge tag 'dt' of git://git.kernel.org/.../arm-soc")
causes a duplicated build target.  This patch fixes it and sorts out the
build target alphabetically so that we can recognize something wrong
easily.

Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-21 16:38:29 -08:00
Linus Torvalds
54d46ea993 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull signal handling cleanups from Al Viro:
 "sigaltstack infrastructure + conversion for x86, alpha and um,
  COMPAT_SYSCALL_DEFINE infrastructure.

  Note that there are several conflicts between "unify
  SS_ONSTACK/SS_DISABLE definitions" and UAPI patches in mainline;
  resolution is trivial - just remove definitions of SS_ONSTACK and
  SS_DISABLED from arch/*/uapi/asm/signal.h; they are all identical and
  include/uapi/linux/signal.h contains the unified variant."

Fixed up conflicts as per Al.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  alpha: switch to generic sigaltstack
  new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those
  generic compat_sys_sigaltstack()
  introduce generic sys_sigaltstack(), switch x86 and um to it
  new helper: compat_user_stack_pointer()
  new helper: restore_altstack()
  unify SS_ONSTACK/SS_DISABLE definitions
  new helper: current_user_stack_pointer()
  missing user_stack_pointer() instances
  Bury the conditionals from kernel_thread/kernel_execve series
  COMPAT_SYSCALL_DEFINE: infrastructure
2012-12-20 18:05:28 -08:00
Linus Torvalds
f59dc2bb5a Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "A number of smallish fixes scattered around the ARM code.  Probably
  the most serious one is the one from Al addressing the missing locking
  in the swap emulation code."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7607/1: realview: fix private peripheral memory base for EB rev. B boards
  ARM: 7606/1: cache: flush to LoUU instead of LoUIS on uniprocessor CPUs
  ARM: missing ->mmap_sem around find_vma() in swp_emulate.c
  ARM: 7605/1: vmlinux.lds: Move .notes section next to the rodata
  ARM: 7602/1: Pass real "__machine_arch_type" variable to setup_machine_tags() procedure
  ARM: 7600/1: include CONFIG_DEBUG_LL_INCLUDE rather than mach/debug-macro.S
2012-12-20 17:56:23 -08:00
Linus Torvalds
f3dc1294c8 ARM: arm-soc fixes for 3.8, part 2
Here are a few more fixes for 3.8. Two branches of fixes for Samsung
 platforms, including fixes for the audio build errors on all non-DT
 platforms. There's also a fixup to the sunxi device-tree file renames
 due to a bad patch application by me, and a fix for OMAP due to function
 renames merged through the powerpc tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ01HjAAoJEIwa5zzehBx3Ya8P/0aq4ENXZedwcJY8bykrw52a
 EG5vIM7LYWR+9oX8/FFcYmTqtfM90XTZjJ0uF+fr1HUfQyOAvZYI6yfSueikmQ+n
 4aqytbHaLmns0Ywu35eUZ9XazmogR8tS+rMdak3H1l5l4wAag2lTxLvov9/SlmME
 ckQUBAiSN4jNswv+mzpxkJz9QMw1LGpvxXYrLKBssZPfjDkLxzSC/AyfO8/mu0Kp
 hpPp2YCKYxmSjlZtxtOC4xQjfgxisVbagj0z4zrIzWxz79l014YF7FprdR0YdyX+
 yiOvWawD1c+taj40lQRdfOBwU/KXwFv8nyKpxY/JqPbnLpiKZ9hVkUAgwNynMgYR
 kPzNyQUCvvZKZ8C9b+l4ZlKd/B/fPAOAARG+heUx2B7R4zaYz2yMUbTfIJqTykXc
 HfyacHLGjreuQVu3lZ9BsqoJPqb+ITtInhrbdfV0N4e++1G12htrkKo7++llqtAU
 iPGAKdHMTBCofnhmfjce5hBAkxDd7eqM1EG5io0vZK8CC4i4yZV+aXhveC2X+Hgq
 8muRa4SV2pFIBK1SscVJMkw7vZNMmMEgROI78wJmY7/NWppH1GZFbFCwR4mBdmlA
 RSnEJy/lyKp3wZzAPyoVzNvJDXwxvl3iY/r2SlvX9SlFTItwCKKMc0571/63nAv3
 Vt7+pCDZDKhikY445VLF
 =s7qv
 -----END PGP SIGNATURE-----

Merge tag 'fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes part 2 from Olof Johansson:
 "Here are a few more fixes for 3.8.  Two branches of fixes for Samsung
  platforms, including fixes for the audio build errors on all non-DT
  platforms.  There's also a fixup to the sunxi device-tree file renames
  due to a bad patch application by me, and a fix for OMAP due to
  function renames merged through the powerpc tree."

* tag 'fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: Fix compillation error in mach-omap2/timer.c
  ARM: sunxi: rename device tree source files
  ARM: EXYNOS: Avoid passing the clks through platform data
  ARM: S5PV210: Avoid passing the clks through platform data
  ARM: S5P64X0: Add I2S clkdev support
  ARM: S5PC100: Add I2S clkdev support
  ARM: S3C64XX: Add I2S clkdev support
  ARM: EXYNOS: Fix MSHC clocks instance names
  ARM: EXYNOS: Fix NULL pointer dereference bug in SMDKV310
  ARM: EXYNOS: Fix NULL pointer dereference bug in SMDK4X12
  ARM: EXYNOS: Fix NULL pointer dereference bug in Origen
  ARM: SAMSUNG: Add missing include guard to gpio-core.h
  pinctrl: exynos5440/samsung: Staticize pcfgs
  pinctrl: samsung: Fix a typo in pinctrl-samsung.h
  ARM: EXYNOS: fix skip scu_enable() for EXYNOS5440
  ARM: EXYNOS: fix GIC using for EXYNOS5440
  ARM: EXYNOS: fix build error when MFC is not selected
2012-12-20 17:55:34 -08:00
Tony Lindgren
6f8c9d2130 ARM: OMAP2+: Trivial fix for IOMMU merge issue
Commit 787314c35f ("Merge tag 'iommu-updates-v3.8' of
git://git./linux/kernel/git/joro/iommu") did not account for the changed
header location.

The headers were made local to mach-omap2 as they are specific to omap2+
only, and we wanted to get most of the #include <plat/*.h> headers fixed
up anyways for the ARM multiplatform support.

We attempted to avoid this kind of merge conflict early on by setting up
a minimal git branch shared by the arm-soc tree and the iommu tree, but
looks like we still hit a merge issue there as the branches got merged
as various topic branches.

Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-20 14:15:26 -08:00
Linus Torvalds
787314c35f IOMMU Updates for Linux v3.8
A few new features this merge-window. The most important one is
 probably, that dma-debug now warns if a dma-handle is not checked with
 dma_mapping_error by the device driver. This requires minor changes to
 some architectures which make use of dma-debug. Most of these changes
 have the respective Acks by the Arch-Maintainers.
 Besides that there are updates to the AMD IOMMU driver for refactor the
 IOMMU-Groups support and to make sure it does not trigger a hardware
 erratum.
 The OMAP changes (for which I pulled in a branch from Tony Lindgren's
 tree) have a conflict in linux-next with the arm-soc tree. The conflict
 is in the file arch/arm/mach-omap2/clock44xx_data.c which is deleted in
 the arm-soc tree. It is safe to delete the file too so solve the
 conflict. Similar changes are done in the arm-soc tree in the common
 clock framework migration. A missing hunk from the patch in the IOMMU
 tree will be submitted as a seperate patch when the merge-window is
 closed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQzbQQAAoJECvwRC2XARrjXCIP/2RxBzbVOiaPOorl+ZWbsZ41
 lzWiXsCHJkh4BK4/qGsVeKhiNd9LcbQUlhywnBbhWxym3spzmjGtvU2Hcg8QiO/M
 R83r9S4e8Z6DnF9Gcats1Ns9BufgpyhLXg3XoXPxtyHOgRS59fvYi6xXOxyX30Dy
 uhbj+WL6UD0zvOMNztEnM1p6UhX+XlpvzKDTR5+G5xKdVPkcgeiaKSwqz739caTn
 QE2NpqIh+8Mwuu1nIapk8h07xhUYU5eGMXa38u1LvDwSHsrsCMLC+lXIjtInn7Gw
 Bv+XcCHgtOaoPQwwk/xd2HVwJQxO9HNb5YX51EIjwP0C5S/3yW9Ji1RgqFb6Ewqq
 jIkF6ckwUheLWsBGkw5UknI/f7RX3MDiTWkziYLIniYKKewm+ymGfgIqPt2TzLIO
 tMZZiIssKvy7wOXQ5JjpYJg5Xmrau6opNwdEguC8pWkJT7qsn+3SeLjMt0Lh9IoY
 +37DOgOLb3O3/vnZJ3i0KMRZBfVeaRj5HaGmlxFCYUZCNQymIPTih9Jtqm+WuVcu
 YaGQCTtynsQ0JVh8YEekLzSfgd3OODP68fyCg1CQNixEgvUi2hd/toX2/Z1wkkSA
 JC9bZarcoPkSWqaTAA2HvmaaxvRR+0UbhFPopFTQarVV0MVLZWBxoyuKy/nMrmMd
 UgTzrDYy74UKdrSTwIXg
 =pPHZ
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "A few new features this merge-window.  The most important one is
  probably, that dma-debug now warns if a dma-handle is not checked with
  dma_mapping_error by the device driver.  This requires minor changes
  to some architectures which make use of dma-debug.  Most of these
  changes have the respective Acks by the Arch-Maintainers.

  Besides that there are updates to the AMD IOMMU driver for refactor
  the IOMMU-Groups support and to make sure it does not trigger a
  hardware erratum.

  The OMAP changes (for which I pulled in a branch from Tony Lindgren's
  tree) have a conflict in linux-next with the arm-soc tree.  The
  conflict is in the file arch/arm/mach-omap2/clock44xx_data.c which is
  deleted in the arm-soc tree.  It is safe to delete the file too so
  solve the conflict.  Similar changes are done in the arm-soc tree in
  the common clock framework migration.  A missing hunk from the patch
  in the IOMMU tree will be submitted as a seperate patch when the
  merge-window is closed."

* tag 'iommu-updates-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (29 commits)
  ARM: dma-mapping: support debug_dma_mapping_error
  ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks
  iommu/omap: Adapt to runtime pm
  iommu/omap: Migrate to hwmod framework
  iommu/omap: Keep mmu enabled when requested
  iommu/omap: Remove redundant clock handling on ISR
  iommu/amd: Remove obsolete comment
  iommu/amd: Don't use 512GB pages
  iommu/tegra: smmu: Move bus_set_iommu after probe for multi arch
  iommu/tegra: gart: Move bus_set_iommu after probe for multi arch
  iommu/tegra: smmu: Remove unnecessary PTC/TLB flush all
  tile: dma_debug: add debug_dma_mapping_error support
  sh: dma_debug: add debug_dma_mapping_error support
  powerpc: dma_debug: add debug_dma_mapping_error support
  mips: dma_debug: add debug_dma_mapping_error support
  microblaze: dma-mapping: support debug_dma_mapping_error
  ia64: dma_debug: add debug_dma_mapping_error support
  c6x: dma_debug: add debug_dma_mapping_error support
  ARM64: dma_debug: add debug_dma_mapping_error support
  intel-iommu: Prevent devices with RMRRs from being placed into SI Domain
  ...
2012-12-20 10:07:25 -08:00
Peter Ujfalusi
2727da8595 ARM: OMAP2+: Fix compillation error in mach-omap2/timer.c
prom_add_property() has been renamed to of_add_property()
This patch fixes the following comilation error:

arch/arm/mach-omap2/timer.c: In function ‘omap_get_timer_dt’:
arch/arm/mach-omap2/timer.c:178:3: error: implicit declaration of function ‘prom_add_property’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[1]: *** [arch/arm/mach-omap2/timer.o] Error 1
make[1]: *** Waiting for unfinished jobs....

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-20 09:45:03 -08:00
Olof Johansson
f438a830fa Merge branch 'v3.8-samsung-fixes-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim:

This is for fix the following build error in dev-audio.c on current Samsung
platforms :-(

arch/arm/mach-exynos/dev-audio.c:58:4: error: unknown field 'src_clk'
specified in initializer
arch/arm/mach-exynos/dev-audio.c:58:4: warning: initialization makes integer
from pointer without a cast [enabled by default]
arch/arm/mach-exynos/dev-audio.c:58:4: warning: (near initialization for
'i2sv5_pdata.type.i2s.idma_addr') [enabled by default]
arch/arm/mach-exynos/dev-audio.c:91:4: error: unknown field 'src_clk'
specified in initializer
arch/arm/mach-exynos/dev-audio.c:91:4: warning: initialization makes integer
from pointer without a cast [enabled by default]
arch/arm/mach-exynos/dev-audio.c:91:4: warning: (near initialization for
'i2sv3_pdata.type.i2s.idma_addr') [enabled by default]

* 'v3.8-samsung-fixes-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Avoid passing the clks through platform data
  ARM: S5PV210: Avoid passing the clks through platform data
  ARM: S5P64X0: Add I2S clkdev support
  ARM: S5PC100: Add I2S clkdev support
  ARM: S3C64XX: Add I2S clkdev support

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-20 09:42:47 -08:00
Olof Johansson
f2420ec2d0 Merge branch 'v3.8-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim:

Here is Samsung fixes-1 for v3.8-rc1.
Most of them are trivial fixes which are for NULL pointer dereference, MSHC
clocks instance names and exynos5440 stuff.

* 'v3.8-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Fix MSHC clocks instance names
  ARM: EXYNOS: Fix NULL pointer dereference bug in SMDKV310
  ARM: EXYNOS: Fix NULL pointer dereference bug in SMDK4X12
  ARM: EXYNOS: Fix NULL pointer dereference bug in Origen
  ARM: SAMSUNG: Add missing include guard to gpio-core.h
  pinctrl: exynos5440/samsung: Staticize pcfgs
  pinctrl: samsung: Fix a typo in pinctrl-samsung.h
  ARM: EXYNOS: fix skip scu_enable() for EXYNOS5440
  ARM: EXYNOS: fix GIC using for EXYNOS5440
  ARM: EXYNOS: fix build error when MFC is not selected

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-20 09:42:46 -08:00
Olof Johansson
febd41d59d ARM: sunxi: rename device tree source files
This is the rename portion of "ARM: sunxi: Change device tree naming
scheme for sunxi" that were missed when the patch was applied.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-20 09:42:37 -08:00
Vaibhav Bedia
1800098549 ARM: OMAP: Fix build breakage due to missing include in i2c.c
Merge commit 752451f01c ("Merge branch 'i2c-embedded/for-next' of
git://git.pengutronix.de/git/wsa/linux") resulted in a build breakage
for OMAP

  arch/arm/mach-omap2/i2c.c: In function 'omap_pm_set_max_mpu_wakeup_lat_compat':
  arch/arm/mach-omap2/i2c.c:130:2: error: implicit declaration of function 'omap_pm_set_max_mpu_wakeup_lat'
  make[1]: *** [arch/arm/mach-omap2/i2c.o] Error 1

Fix this by including the appropriate header file with the function
prototype.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-20 08:43:25 -08:00
Linus Torvalds
03c850ec32 Sound fixes for 3.8-rc1
This update contains overall only driver-specific fixes.
 Slightly large LOC are seen in usb-audio driver for a couple of new
 device quirks and cs42l71 ASoC driver for enhanced features.
 The others are a few small (regression) fixes HD-audio, and yet other
 small / trival ASoC fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ0thSAAoJEGwxgFQ9KSmk/i8P+wcdjCcp5FdfZ5YP2h9siEw5
 7KJPwwk9eTa0PVB5olgabxSh6L5P+rM69OGiXnHSKF8RwsuZDRp/5pPcaoUVRzH/
 6uibGozfLApeLBuBAJZ96eJhRIigysoSrm5W4FQeNVAbwK67zpIjP/xGwKa0+qfO
 vsK/BtSn+nVsmFpgOfO6vXZ7gKBlfKGXHYdyFVXzHEhGYSHLdf1IDxnCapIXlh78
 0nXHD2FHgKlSM6y/S6W7wiUwyNqbgmnZHwh29iIyes1CrX0wVyvtos3qgwJHukrU
 WVY87E1TDxD6HLAWTUxqeOIvNyucSarUZ+kvtYg0i31gmRCY8QNXqYVp1wBybqVd
 Uwbwe4qWwSxXhXluodFsizNwcH9T+KA3IM4B5u6yCT1pFY759pCh/KpLoNfD+maL
 6atnBU6lvtTCMxoeSyJFSdAjdOQJUpylQ9TyQaI/PIr6jrEMVC2ki/i3UX+YpQGo
 oWJj5x8Nl58MUv7GhYGTo7vfm3ZqaUbxN/YugbCeVkrcV0McJNycvddotplD4iTd
 pqfep1fVpefW9X4pJnvsys2neo7R8e8a87Qg2CfVGXQ91ijevPCf+YAh4EmHShsT
 vwNcOP/gZ+qQp/bY40SigMj5SZtZ/ZQxT47yPo6OLI4FyhyD+WK4l1AAEK5B1uPA
 odsIcQg2F6/RjzkDSsSl
 =JoY5
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This update contains overall only driver-specific fixes.  Slightly
  large LOC are seen in usb-audio driver for a couple of new device
  quirks and cs42l71 ASoC driver for enhanced features.  The others are
  a few small (regression) fixes HD-audio, and yet other small / trival
  ASoC fixes."

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card:
  ALSA: HDA: Fix sound resume hang
  ALSA: hda - bug fix for invalid connection list of Haswell HDMI codec pins
  ALSA: hda - Fix the wrong pincaps set in ALC861VD dallas/hp fixup
  ALSA: hda - Set codec->single_adc_amp flag for Realtek codecs
  ASoC: atmel-ssc: change disable to disable in dts node
  ASoC: Prevent pop_wait overwrite
  ALSA: usb-audio: ignore-quirk for HP Wireless Audio
  ALSA: hda - Always turn on pins for HDMI/DP
  ALSA: hda - Fix pin configuration of HP Pavilion dv7
  ASoC: core: Fix splitting of log messages
  ASoC: cs42l73: Change VSPIN/VSPOUT to VSPINOUT
  ASoC: cs42l73: Add DAPM events for power down.
  ASoC: cs42l73: Add DMIC's as DAPM inputs.
  ASoC: sigmadsp: Fix endianness conversion issue
  ASoC: tpa6130a2: Use devm_* APIs
2012-12-20 07:52:13 -08:00
Linus Torvalds
1ffab3d413 ARM: arm-soc fixes for 3.8
This is a batch of fixes for arm-soc platforms, most of it is for OMAP
 but there are others too (i.MX, Tegra, ep93xx). Fixes warnings, some
 broken platforms and drivers, etc. A bit all over the map really.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ0BBZAAoJEIwa5zzehBx3WwgP/jS31XauTUrGLEOCUzarINB/
 7ZVGkkVv9cp4AqW1lcBAyQak424ff2hxfhJWxRthBJT/fQ2OFcdZFWLkFEG2kO0y
 PZ5WCxI1Q4ZNz8iW9qynIRCyhvzhaTHwA7wsGqmGRl1u2VMfoeBiAPNoxTAnpUEm
 05L7EBDVSK++KgvkuoQ2KeWOII9IKNaHH4Yg5y8/guCsTbsWjzo4cjS5MGmo3s7r
 6ArPr2h2WvSbayL67aPheBwg6K0ScY/JJQhL/8HgFbnnnL+mDcZ9iH5yKl/b25BX
 FnQkjb37p0GUDNhXQOoElifghDF8rIAD6o5WDgTL2h5uun4WImYbMS/CktnLAQeH
 wNVvrpmpxi11xf9D3SCRCM4jVAy4u1DVEL/0FElWCx1hn4iixm9hGvQ+YPq6/pMl
 LOP87mzmFn+FhPtj7HIDp5B1ECw1xqcP064FHUYhMEntEHfN/Xh6gmDooesDrbUf
 VuvjrSRBIeTI98xrNALepqWn5w/veZtIymZdEz9vlcK8gQ+tHNt7oI/RbDb08cap
 gyMboWciAm2F6FE9QNlrjQHTbCEIrE5BoryRW87ArTbYhKvnZ1vpW01YmJHhA6LE
 v6glfw6FWYAU8wlF4xbyzN1Gy3PB4kUMCGDqZzh4wU1JGXklJm3CbIf73sOwRmg7
 lmnw+RYq6z/RMmPjjrb4
 =4g/i
 -----END PGP SIGNATURE-----

Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This is a batch of fixes for arm-soc platforms, most of it is for OMAP
  but there are others too (i.MX, Tegra, ep93xx).  Fixes warnings, some
  broken platforms and drivers, etc.  A bit all over the map really."

There was some concern about commit 68136b10 ("RM: sunxi: Change device
tree naming scheme for sunxi"), but Tony says:
 "Looks like that's trivial to fix as needed, no need to rebuild the
  branch to fix that AFAIK.

  The fix can be done once Olof is available online again.

  Linus, I suggest that you go ahead and pull this if there are no other
  issues with this branch."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  ARM: sunxi: Change device tree naming scheme for sunxi
  ARM: ux500: fix missing include
  ARM: u300: delete custom pin hog code
  ARM: davinci: fix build break due to missing include
  ARM: exynos: Fix warning due to missing 'inline' in stub
  ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices
  ARM i.MX51 clock: Fix regression since enabling MIPI/HSP clocks
  ARM: dts: mx27: Fix the AIPI bus for FEC
  ARM: OMAP2+: common: remove use of vram
  ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
  ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists
  ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider
  ARM: OMAP4: Fix EMU clock domain always on
  ARM: OMAP4460: Workaround ABE DPLL failing to turn-on
  ARM: OMAP4: Enhance support for DPLLs with 4X multiplier
  ARM: OMAP4: Add function table for non-M4X dplls
  ARM: OMAP4: Update timer clock aliases
  ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h
  ARM: dts: Add build target for omap4-panda-a4
  ARM: dts: OMAP2420: Correct H4 board memory size
  ...
2012-12-20 07:21:54 -08:00
Will Deacon
e6ee4b2b57 ARM: 7607/1: realview: fix private peripheral memory base for EB rev. B boards
Commit 34ae6c96a6 ("ARM: 7298/1: realview: fix mapping of MPCore
private memory region") accidentally broke the definition for the base
address of the private peripheral region on revision B Realview-EB
boards.

This patch uses the correct address for REALVIEW_EB11MP_PRIV_MEM_BASE.

Cc: <stable@vger.kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-20 10:42:00 +00:00
Will Deacon
d056a699dd ARM: 7606/1: cache: flush to LoUU instead of LoUIS on uniprocessor CPUs
flush_cache_louis flushes the D-side caches to the point of unification
inner-shareable. On uniprocessor CPUs, this is defined as zero and
therefore no flushing will take place. Rather than invent a new interface
for UP systems, instead use our SMP_ON_UP patching code to read the
LoUU from the CLIDR instead.

Cc: <stable@vger.kernel.org>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-20 10:41:56 +00:00
Al Viro
7bf9b7bef8 ARM: missing ->mmap_sem around find_vma() in swp_emulate.c
find_vma() is *not* safe when somebody else is removing vmas.  Not just
the return value might get bogus just as you are getting it (this instance
doesn't try to dereference the resulting vma), the search itself can get
buggered in rather spectacular ways.  IOW, ->mmap_sem really, really is
not optional here.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-20 10:40:24 +00:00
Al Viro
031b656698 unify SS_ONSTACK/SS_DISABLE definitions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-19 18:07:39 -05:00
Al Viro
ae903caae2 Bury the conditionals from kernel_thread/kernel_execve series
All architectures have
	CONFIG_GENERIC_KERNEL_THREAD
	CONFIG_GENERIC_KERNEL_EXECVE
	__ARCH_WANT_SYS_EXECVE
None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers
of kernel_execve() (which is a trivial wrapper for do_execve() now) left.
Kill the conditionals and make both callers use do_execve().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-19 18:07:38 -05:00
Linus Torvalds
ca2a88f56a MTD pull for 3.8
- Various cleanups especially in NAND tests
  - Add support for NAND flash on BCMA bus
  - DT support for sh_flctl and denali NAND drivers
  - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
  - Fix JFFS2 locking bug in ENOMEM failure path
  - New SPI flash chips, as usual
  - Support writing in 'reliable mode' for DiskOnChip G4
  - Debugfs support in nandsim
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iEYEABECAAYFAlDSAa4ACgkQdwG7hYl686MMcACeNYa//ghPtccb5L+IRXsqaFDL
 Yi4AoLWOaOjN8qM4KUF/bfMEkwNGAePz
 =DaAQ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd

Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...
2012-12-19 12:47:41 -08:00
Padmavathi Venna
fb0a205947 ARM: EXYNOS: Avoid passing the clks through platform data
I2S controller has an internal mux for RCLK source clks. The list
of source clk names were passed through platform data in non-dt case.
The variable holding the list of RCLK source clk names is not
required, as the list of clks need to be registered with clkdev
using generic connection id. This is required as part of adding DT
support for I2S controller driver.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-19 09:49:29 -08:00
Padmavathi Venna
1fa49e4697 ARM: S5PV210: Avoid passing the clks through platform data
I2S controller has an internal mux for RCLK source clks. The list
of source clk names were passed through platform data in non-dt case.
The variable holding the list of RCLK source clk names is not
required, as the list of clks need to be registered with clkdev
using generic connection id. This is required as part of adding DT
support for I2S controller driver.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-19 09:49:29 -08:00
Padmavathi Venna
d690b313a6 ARM: S5P64X0: Add I2S clkdev support
I2S controller has an internal mux for RCLK source clk. The list
of source clk names were passed through platform data in non-dt case.
Register the existing RCLK source clocks with clkdev using generic
connection id. This is required as part of adding DT support
for I2S controller driver.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-19 09:49:29 -08:00
Padmavathi Venna
eaff82ed0f ARM: S5PC100: Add I2S clkdev support
I2S controller has an internal mux for RCLK source clk. The list
of source clk names were passed through platform data in non-dt case.
Register the existing RCLK source clocks with clkdev using generic
connection id. This is required as part of adding DT support
for I2S controller driver.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-19 09:49:29 -08:00
Padmavathi Venna
db7af96ee9 ARM: S3C64XX: Add I2S clkdev support
I2S controller has an internal mux for RCLK source clks. The list
of source clk names were passed through platform data in non-dt case.
Register the existing RCLK source clocks with clkdev using generic
connection id. This is required as part of adding DT support
for I2S controller driver.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-19 09:49:29 -08:00
Dongjin Kim
454696fdc8 ARM: EXYNOS: Fix MSHC clocks instance names
Replace clock instance name of MSHC controller for BIC and CIU of Exynos4412.

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-19 09:25:27 -08:00
Sachin Kamat
873673d302 ARM: EXYNOS: Fix NULL pointer dereference bug in SMDKV310
When DRM support for Samsung SoC and Samsung S3C framebuffer support
are selected, the kernel crashes as it does not get the required
platform data. Change the compile macro to CONFIG_DRM_EXYNOS_FIMD
to fix this.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-19 09:25:23 -08:00
Sachin Kamat
bdd1853212 ARM: EXYNOS: Fix NULL pointer dereference bug in SMDK4X12
When DRM support for Samsung SoC and Samsung S3C framebuffer support
are selected, the kernel crashes as it does not get the required
platform data. Change the compile macro to CONFIG_DRM_EXYNOS_FIMD
to fix this.

Fixes the following boot time crash:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at 0x0
LR is at s3c_fb_probe+0x198/0x788
[<c0152270>] (s3c_fb_probe+0x198/0x788) from [<c019e52c>] (platform_drv_probe+0x18/0x1c)
[<c019e52c>] (platform_drv_probe+0x18/0x1c) from [<c019d2e4>] (driver_probe_device+0x70/0x1f0)
[<c019d2e4>] (driver_probe_device+0x70/0x1f0) from [<c019d4f0>] (__driver_attach+0x8c/0x90)
[<c019d4f0>] (__driver_attach+0x8c/0x90) from [<c019bc3c>] (bus_for_each_dev+0x50/0x7c)
[<c019bc3c>] (bus_for_each_dev+0x50/0x7c) from [<c019cb4c>] (bus_add_driver+0x170/0x23c)
[<c019cb4c>] (bus_add_driver+0x170/0x23c) from [<c019d9a4>] (driver_register+0x78/0x144)
[<c019d9a4>] (driver_register+0x78/0x144) from [<c000862c>] (do_one_initcall+0x34/0x174)
[<c000862c>] (do_one_initcall+0x34/0x174) from [<c020ed7c>] (kernel_init+0x100/0x2a0)
[<c020ed7c>] (kernel_init+0x100/0x2a0) from [<c000e118>] (ret_from_fork+0x14/0x3c)

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-19 09:25:18 -08:00
Sachin Kamat
479dda2218 ARM: EXYNOS: Fix NULL pointer dereference bug in Origen
When DRM support for Samsung SoC and Samsung S3C framebuffer support
are selected, the kernel crashes as it does not get the required
platform data. Change the compile macro to CONFIG_DRM_EXYNOS_FIMD
to fix this.

Without this patch the following crash occurs during bootup:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at 0x0
LR is at s3c_fb_probe+0x198/0x788
[<c01520e8>] (s3c_fb_probe+0x198/0x788) from [<c01a3dd4>] (platform_drv_probe+0x18/0x1c)
[<c01a3dd4>] (platform_drv_probe+0x18/0x1c) from [<c01a2b8c>] (driver_probe_device+0x70/0x1f0)
[<c01a2b8c>] (driver_probe_device+0x70/0x1f0) from [<c01a2d98>] (__driver_attach+0x8c/0x90)
[<c01a2d98>] (__driver_attach+0x8c/0x90) from [<c01a14e4>] (bus_for_each_dev+0x50/0x7c)
[<c01a14e4>] (bus_for_each_dev+0x50/0x7c) from [<c01a23f4>] (bus_add_driver+0x170/0x23c)
[<c01a23f4>] (bus_add_driver+0x170/0x23c) from [<c01a324c>] (driver_register+0x78/0x144)
[<c01a324c>] (driver_register+0x78/0x144) from [<c000862c>] (do_one_initcall+0x34/0x174)
[<c000862c>] (do_one_initcall+0x34/0x174) from [<c01de210>] (kernel_init+0x100/0x2a0)
[<c01de210>] (kernel_init+0x100/0x2a0) from [<c000e118>] (ret_from_fork+0x14/0x3c)

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-19 09:25:14 -08:00
Linus Torvalds
5031a2a7c1 In part2:
- A small patch for the RX51 OMAP board (Nokia N900 phone), the patch
   creates a battery monitor device instance, so that it can be probed. It
   was acked by the OMAP maintainer;
 
 - A couple of late bug fixes for the charger-manager: corrects corner
   cases for the battery full handling.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ0P/CAAoJEGgI9fZJve1b1FQP/2EmdDqZ/RLtiDskid4JC8sQ
 NZMGaqhtXzdr4Duukrt7mvmZR0i3mJcSiGMDonsJFPoUXK6Zwr4eWpdL71Ehn7Sh
 0X6ul2iipqUi1g78mpFE8BwwTyzKxsL/+Njj25s/VuBrOYfA+xF44AgDG90/YpUf
 xRwNGsLAESpKCxsT4NKoPSCg6T6SfprPlyECdtt4hWCetntVezc6TON14JU/E2OS
 5Bq07TWKAN/F9a4QIiYDaykTf4NrERwqHnmgA6kHG/Bf0q61ON91UCI4o+UVIGMe
 v3Rc52pZPbqsatOd/t5ujPwBiQwy1+70mMeuYmdw9oJHScAG2+KFKns4dw3zaiIE
 9rpyo3T2E1tiu1/Ny71hiBAqOG5Wuh6USQ02PyUXKnMaZ1Owcr47MfOMoY8LZLV1
 knAfduMi/jpHva3UBRvnShbZMelM5AJk2ctLq/lH8JxljYjh4jcsWNGm++1rLmOr
 jvRpqso4IJxhAoe2i23p7lalsAemwnfR2PfiP3PH/77jJISZrhXZs2e4DwR0N/KM
 pBvfS8DEp2xEcg/0OUXU5O90J6DBaVL0N8fntn9HW8VHf1o/6ETr46b562hAt9s8
 Mp/uPK/FMpMz+a8jsactUGsn2HVuYYDTIQqRW3AeUoaT6hXrYJEdd2iPCZCh1OBF
 KmpjWS3ZDeDTBMpfgZRk
 =hppb
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6

Pull battery update, part 2, from Anton Vorontsov:
 "These are left overs that I didn't have time to review/apply before
  the merge window opened.  I didn't want to "spoil" the first pull
  request with these late patches, so they were not included:

   - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch
     creates a battery monitor device instance, so that it can be
     probed.  It was acked by the OMAP maintainer;

   - A couple of late bug fixes for the charger-manager: corrects corner
     cases for the battery full handling."

* tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6:
  charger-manager: Fix bug when check dropped voltage after fullbatt event
  charger-manager: Fix bug related to checking fully charged state of battery
  ARM: OMAP: rx51: Register platform device for rx51_battery
2012-12-19 08:14:08 -08:00
Linus Torvalds
7a684c452e Nothing all that exciting; a new module-from-fd syscall for those who want
to verify the source of the module (ChromeOS) and/or use standard IMA on it
 or other security hooks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ0VKlAAoJENkgDmzRrbjxjuEQALVHpD1cSmryOzVwkNn7rVGP
 PV3KVbUs+qzUCm2c3AafIIlSBm2LOUl+cR3uNC7di8aHarRF3VHkK2OQ4Fx97ECd
 KKBqAyY3R0q1mAKujb/MWwiK0YgosEDIOzGGn2yQhNFsxKqnMB02P4j82IO7+g+w
 Cc3XuDyWHoH2I+ySgz0Q8NHAqufD/DMZUKud7jw2Lsv6PuICJ1Oqgl/Gd/muxort
 4a5tV3tjhRGywHS/8b2fbDUXkybC5NKK0FN+gyoaROmJ/THeHEQDGXZT9bc2vmVx
 HvRy/5k8dzQ6LAJ2mLnPvy0pmv0u7NYMvjxTxxUlUkFMkYuVticikQfwSYDbDPt4
 mbsLxchpgi8z4x8HltEERffCX5tldo/5hz1uemqhqIsMRIrRFnlHkSIgkGjVHf2u
 LXQBLT8uTm6C0VyNQPrI/hUZzIax7WtKbPSoK9lmExNbKqloEFh/mVXvfQxei2kp
 wnUZcnmPIqSvw7b4CWu7HibMYu2VvGBgm3YIfJRi4AQme1mzFYLpZoxF5Pj+Ykbt
 T//Hb1EsNQTTFCg7MZhnJSAw/EVUvNDUoullORClyqw6+xxjVKqWpPJgYDRfWOlJ
 Xa+s7DNrL+Oo1WWR8l5ruoQszbR8szIyeyPKKxRUcQj2zsqghoWuzKAx2saSEw3W
 pNkoJU+dGC7kG/yVAS8N
 =uoJj
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module update from Rusty Russell:
 "Nothing all that exciting; a new module-from-fd syscall for those who
  want to verify the source of the module (ChromeOS) and/or use standard
  IMA on it or other security hooks."

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  MODSIGN: Fix kbuild output when using default extra_certificates
  MODSIGN: Avoid using .incbin in C source
  modules: don't hand 0 to vmalloc.
  module: Remove a extra null character at the top of module->strtab.
  ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants
  ASN.1: Define indefinite length marker constant
  moduleparam: use __UNIQUE_ID()
  __UNIQUE_ID()
  MODSIGN: Add modules_sign make target
  powerpc: add finit_module syscall.
  ima: support new kernel module syscall
  add finit_module syscall to asm-generic
  ARM: add finit_module syscall to ARM
  security: introduce kernel_module_from_file hook
  module: add flags arg to sys_finit_module()
  module: add syscall to load module from fd
2012-12-19 07:55:08 -08:00
Michael Spang
d5c1b541ba ARM: SAMSUNG: Add missing include guard to gpio-core.h
Signed-off-by: Michael Spang <spang@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-18 19:00:25 -08:00
Kukjin Kim
83e877a334 ARM: EXYNOS: fix skip scu_enable() for EXYNOS5440
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-18 19:00:25 -08:00
Kukjin Kim
12fee1949e ARM: EXYNOS: fix GIC using for EXYNOS5440
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-18 19:00:25 -08:00
Kukjin Kim
ade7ffbb9b ARM: EXYNOS: fix build error when MFC is not selected
This fixes following:
arch/arm/mach-exynos/built-in.o: In function `exynos5_reserve':
arch/arm/mach-exynos/mach-exynos5-dt.c:177: undefined reference to `s5p_fdt_find_mfc_mem'
arch/arm/mach-exynos/mach-exynos5-dt.c:177: undefined reference to `s5p_fdt_find_mfc_mem'
arch/arm/mach-exynos/mach-exynos5-dt.c:178: undefined reference to `s5p_mfc_reserve_mem'

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-18 19:00:25 -08:00
Linus Torvalds
752451f01c Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull i2c-embedded changes from Wolfram Sang:
 - CBUS driver (an I2C variant)
 - continued rework of the omap driver
 - s3c2410 gets lots of fixes and gains pinctrl support
 - at91 gains DMA support
 - the GPIO muxer gains devicetree probing
 - typical fixes and additions all over

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits)
  i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag
  i2c: at91: add dma support
  i2c: at91: change struct members indentation
  i2c: at91: fix compilation warning
  i2c: mxs: Do not disable the I2C SMBus quick mode
  i2c: mxs: Handle i2c DMA failure properly
  i2c: s3c2410: Remove recently introduced performance overheads
  i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block
  i2c: s3c2410: Add fix for i2c suspend/resume
  i2c: s3c2410: Fix code to free gpios
  i2c: i2c-cbus-gpio: introduce driver
  i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions
  i2c: ocores: Add irq support for sparc
  i2c: omap: Move the remove constraint
  ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049
  i2c: s3c2410: do not special case HDMIPHY stuck bus detection
  i2c: s3c2410: use exponential back off while polling for bus idle
  i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY
  i2c: s3c2410: grab adapter lock while changing i2c clock
  i2c: s3c2410: Add support for pinctrl
  ...
2012-12-18 16:51:10 -08:00
Linus Torvalds
31564cbd77 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull second round of input updates from Dmitry Torokhov:
 "As usual, there are a couple of new drivers, input core now supports
  managed input devices (devres), a slew of drivers now have device tree
  support and a bunch of fixes and cleanups."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
  Input: walkera0701 - fix crash on startup
  Input: matrix-keymap - provide a proper module license
  Input: gpio_keys_polled - switch to using gpio_request_one()
  Input: gpio_keys - switch to using gpio_request_one()
  Input: wacom - fix touch support for Bamboo Fun CTH-461
  Input: xpad - add a few new VID/PID combinations
  Input: xpad - minor formatting fixes
  Input: gpio-keys-polled - honor 'autorepeat' setting in platform data
  Input: tca8418-keypad - switch to using managed resources
  Input: tca8418_keypad - increase severity of failures in probe()
  Input: tca8418_keypad - move device ID tables closer to where they are used
  Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data
  Input: tca8418_keypad - use a temporary variable for parent device
  Input: tca8418_keypad - add support for shared interrupt
  Input: tca8418_keypad - add support for device tree bindings
  Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver
  Input: bu21013_ts - add support for Device Tree booting
  Input: bu21013_ts - move GPIO init and exit functions into the driver
  Input: bu21013_ts - request regulator that actually exists
  ARM: ux500: Strip out duplicate touch screen platform information
  ...
2012-12-18 12:46:37 -08:00
Linus Torvalds
16e024f30c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc update from Benjamin Herrenschmidt:
 "The main highlight is probably some base POWER8 support.  There's more
  to come such as transactional memory support but that will wait for
  the next one.

  Overall it's pretty quiet, or rather I've been pretty poor at picking
  things up from patchwork and reviewing them this time around and Kumar
  no better on the FSL side it seems..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits)
  powerpc+of: Rename and fix OF reconfig notifier error inject module
  powerpc: mpc5200: Add a3m071 board support
  powerpc/512x: don't compile any platform DIU code if the DIU is not enabled
  powerpc/mpc52xx: use module_platform_driver macro
  powerpc+of: Export of_reconfig_notifier_[register,unregister]
  powerpc/dma/raidengine: add raidengine device
  powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct
  powerpc/mpc85xx: Change spin table to cached memory
  powerpc/fsl-pci: Add PCI controller ATMU PM support
  powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI
  drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS]
  powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers
  powerpc: Disable relocation on exceptions when kexecing
  powerpc: Enable relocation on during exceptions at boot
  powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function
  powerpc: Add wrappers to enable/disable relocation on exceptions
  powerpc: Add set_mode hcall
  powerpc: Setup relocation on exceptions for bare metal systems
  powerpc: Move initial mfspr LPCR out of __init_LPCR
  powerpc: Add relocation on exception vector handlers
  ...
2012-12-18 09:58:09 -08:00
Olof Johansson
4d18391382 Merge tag 'ep93xx-fixes-for-3.8' of git://github.com/RyanMallon/linux-ep93xx into fixes
* tag 'ep93xx-fixes-for-3.8' of git://github.com/RyanMallon/linux-ep93xx:
  ARM: ep93xx: properly wait for UART FIFO to be empty
2012-12-17 18:42:30 -08:00
Olof Johansson
1dc1d2e948 ARM i.MX fixes for v3.8-rc
This fixes a compile failure on imx_v4_v5_defconfig and a regression
 introduced with enabling the MIPI clocks on i.MX51. Also one rather
 cosmetic fix for the i.MX27 dts file.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQzvUaAAoJEPFlmONMx+ezQToQAIYV3iMRY8kO7jsEORwwi3Ww
 GUygWZHJBv1p1sw/tysE68HwAstEicrWfbgicHr2JuirD2puAwYNWLkMFAQ12XWE
 8zE6rFz1aKT32gtqaaJiVZgK0wVy/0druSP+vecXbHO0qUDd09+laJShQBDxAnYz
 /ONycb2+CZygVaqbcyyQ4Wi0ngYyJv+a4AWZDiZT3fn1gIzkEKPBotNGg8Us+O1d
 jnG0dPXDa0OGGTW1vnmBbkRE4knxoDHXg4p7XMRQnqiqQGI4tkMT2gebJYtbjZw2
 nu5i7W8dDdeQq2K512LdiUxj6wEEAETEYWNn0Xblq46BppAb0BIgXPabSDc4i+RW
 Ni1ldykUaXmIs3tzsbC1YGgAPcZs/Afk9tRKUFgaBMiI2mEVf8GNMwEqjRx1aeDg
 5NluUgG+BGS/hMkuXMWdX5exjAmlP49B4dptOGl2bsjdX/2D7Zfj7FUQhjlicCU7
 8IPUZWlu94HwisbPZwynbecV0OPlVsyQRazEw2VA+2epCL3qwpkhvz6Y+P1aoCQ1
 k36Mb3dkfe9j/dUHGJhyxCscl/jFfAVc0m5YKR7QGC12tX1BGEyIrPKJYzGcXJWX
 8PJ1mE6JnkT865UhAeBb0wBCgScYI6/Glko+dBI1O9QSaAtlh5kdUHNekgKz/LtN
 eXU/tR3O9XoqgVx04ehn
 =A/4o
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes

From Sascha Hauer:

ARM i.MX fixes for v3.8-rc

This fixes a compile failure on imx_v4_v5_defconfig and a regression
introduced with enabling the MIPI clocks on i.MX51. Also one rather
cosmetic fix for the i.MX27 dts file.

* tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices
  ARM i.MX51 clock: Fix regression since enabling MIPI/HSP clocks
  ARM: dts: mx27: Fix the AIPI bus for FEC
2012-12-17 18:40:51 -08:00
Olof Johansson
a93178a13d These patches fixes a build error caused by a merge
conflict with the fb code, few timer warnings, and longer
 term regressions for tfp410 and omap h4 ethernet. Also
 included is a GPIO mode fix for the legacy mux code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQz2hxAAoJEBvUPslcq6VzIHMP/i6QowlZm742prpsyeOemU+a
 NZa+bfA58Pps+96zGHuCOfpPsJ8MqvYdwtOyH9NiY648A44LrKCsaqGdEzuXo04T
 wlgNsnMWaOBNzk5pQuUO+IlCorJpv0GXwSW4DO61UVt1A3AdLo1RSl2mq32xM6Qt
 0ZHEhXbbL14QidwmKRo1zubn+nEQKiWRD2+Bj+ccDq3A2lsn6itd+YNnHB0QNwUQ
 +nibTleSV1QecCl0UDIwA4cTyZkeDafoAHaUH1jhIAQ30lZx1r7XbmEk6YJ51v+f
 f02i8tUZoX97Pr82FJnA/T28dkFXWlsliJEQ6pUYW7Y2vMjyLXgBIDQytyS5sD1H
 Eifk6WVuBGTd/mYhcNr7Q/MueIl/aT+c5tzZL3lVnxHZj7CUlt5li2SJQZZBlHN0
 Ix1rtu1YVPdrAqZxn4GV4jqc9e+ULYvP7GZhrJuiBOgHsPzHynOYWZNLN5IVBrbZ
 2zKvk1vHGMKbfEm/oFvjudBm4VRpcgp+W1Xp84YTmKPf/ZlhvjpbZK5whb15LsDM
 N9ufVvNxq6JNo3+8AtQIsch9t0CONXwyRB48lSYte55QgMpHUOMKQZv5NcBsj4RK
 AlvrqZ0PIJrFSRPwKPgWpC5VLP7hwdCMWAAB4nPAxTgjwrT35qoxZgLKiVNQCYrJ
 9NfIbnESzxXKHUFc0NFJ
 =8+P4
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.8/fixes-for-merge-window-v4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

These patches fixes a build error caused by a merge
conflict with the fb code, few timer warnings, and longer
term regressions for tfp410 and omap h4 ethernet. Also
included is a GPIO mode fix for the legacy mux code.

* tag 'omap-for-v3.8/fixes-for-merge-window-v4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: common: remove use of vram
  ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h
  ARM: dts: Add build target for omap4-panda-a4
  ARM: dts: OMAP2420: Correct H4 board memory size
  mfd: omap-usb-host: get rid of cpu_is_omap..() macros
  ARM: OMAP: Remove debug-devices.c
  ARM: OMAP2420: Fix ethernet support for OMAP2420 H4
  OMAP2+: mux: Fixed gpio mux mode analysis
  OMAP: board-files: fix i2c_bus for tfp410
  ARM: OMAP2+: Fix sparse warnings in timer.c
  ARM: AM335x: Fix warning in timer.c
  ARM: OMAP2+: Fix realtime_counter_init warning in timer.c
2012-12-17 18:39:47 -08:00
Olof Johansson
10be289d07 Fix some OMAP4 clock problems, and deal with some sparse warnings from
the OMAP CPUIdle code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQz2w5AAoJEMePsQ0LvSpLWVoP/jVAPysH5PbRaeCQJkxLRs6f
 Ha0OarqOQ+jl34jc9PGv4hVKsaq885SpcOt0DrBHcJBmtmfWgsUVaXN9R25hzxGa
 1y6nT1+qKPImTkZMAVSw05Cw6GdxpImoTRXex7KlNrq92KYR+N5gZQltzeAYkuEi
 SSo55wvthntn3flxebMBeZJROo48TYKvGa+2hSJvfQkDUkp3UCqrFlOZwygyu3nf
 crO1KpY9HNVgrGuQ5g+PASB0R1IiTUiM6pItCMAJOD/Eix6WWbuCMVK0PWOqbh4+
 yUET5P2N7gK1tT+ytS/4KJyGqtihRgM3TkuHZwiUKV17nLzKIM1fzqufG4QobrV/
 pxHL2wArqrQqU1ITlb4/+a6LaIwPc7iO0BmqfNog8mzjx0mcZa9liF2inyVuGMvU
 wsybKYo5p5f7ggLmwJhCZU6nifFoZIov9iSICIeWj0xClRiP5tQb+j7sczVqEPwd
 V1m9yUiNzFLjgDalk3ZkOd+SAm/OlBEfuzzsNwTHYBPObxxxVF25OLp3N/e+zbhm
 4v/EMbVEXSQg8oQyX5EGidgPyox6GTA7My5VbgldYlSLadoPBXy25pwV3iykYS+w
 7SlvJjmrC4iJGYOnH3xEYBC6z8Q4uj38PEv7IAQo/ITFcVkVyBxVR7iJa2LFPksn
 zepWeJQeC+nea6b3YSkG
 =RfYH
 -----END PGP SIGNATURE-----

Merge tag 'omap-fixes-a-for-v3.8-window' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes

From Paul Walmsley per Tony Lindgrens request:

Fix some OMAP4 clock problems, and deal with some sparse warnings from
the OMAP CPUIdle code.

* tag 'omap-fixes-a-for-v3.8-window' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
  ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
  ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists
  ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider
  ARM: OMAP4: Fix EMU clock domain always on
  ARM: OMAP4460: Workaround ABE DPLL failing to turn-on
  ARM: OMAP4: Enhance support for DPLLs with 4X multiplier
  ARM: OMAP4: Add function table for non-M4X dplls
  ARM: OMAP4: Update timer clock aliases
2012-12-17 18:38:55 -08:00
Afzal Mohammed
852168c923 ARM: davinci: remove rtc kicker release
rtc-omap driver is now capable of handling kicker mechanism, hence remove
kicker handling at platform level, instead provide proper device name so
that driver can handle kicker mechanism by itself

Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:20 -08:00
Benjamin Herrenschmidt
376bddd344 Merge remote-tracking branch 'agust/next' into next
Brings some 52xx updates. Also manually merged tools/perf/perf.h.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-18 10:22:27 +11:00
Julia Lawall
f64d204b5c arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON
Just use WARN_ON rather than an if containing only WARN_ON(1).

A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@
- if (e) WARN_ON(1);
+ WARN_ON(e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
YOSHIFUJI Hideaki
7eae44fa67 OMAP2: Fix a typo - replace regist with register.
Fix a typo - replace regist with register.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
Srinivas Kandagatla
e4e9f7ea2e ARM/omap: use module_platform_driver macro
This patch removes some code duplication by using
module_platform_driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
Jon Hunter
669bb47938 ARM: OMAP2+: PMU: Remove unused header
Commit 2ac29a1 (ARM: PMU: fix runtime PM enable) moved the call to
pm_runtime_enable() from the OMAP2+ PMU code into the ARM PERF core
code. However, header for pm_runtime which should have been removed
from the OMAP2+ PMU code was not. It is no longer necessary to include
this header in the OMAP2+ PMU code and so remove it.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
Wei Yongjun
3550a7b213 ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c
Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
Javier Martinez Canillas
17bb5fecc4 ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio
Many TI OMAP SoC based boards that uses twl4030 as codec have
been updated to use the unified audio driver (omap-twl4030)
since they have similar audio setup.

So, is good to have it built to add audio support to these boards.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
AnilKumar Chimata
7a5c606566 ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support
TPS65217 is described in arch/arm/boot/dts/am335x-bone.dts
but doesn't enabled in arch/arm/configs/omap2plus_defconfig.

Enable TPS65217 support in omap2plus_defconfig.

Signed-off-by: Igor Mazanov <i.mazanov@gmail.com>
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
Javier Martinez Canillas
0698811fad ARM: OMAP2+: enable devtmpfs and devtmpfs automount
Since udev-182, udev no longer creates device nodes under /dev
and this has to be managed by the kernel devtmpfs filesystem.

This means that a kernel built with the current OMAP2+ config
will not boot on a system with a recent udev.

Also, it is good to have /dev automatically mounted since some
non-initramfs based setups assumes this and don't manually mount it.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Santosh Shilimkar<santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
Peter Ujfalusi
5f9403db5b ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER
To facilitate upcoming cleanup in twl stack.
No functional change.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
Tony Lindgren
e8d3d47a98 ARM: OMAP2+: Drop plat/cpu.h for omap2plus
The cpu_is_omap macros are now local to arch/arm/mach-omap2
in soc.h and plat/cpu.h can finally be dropped for omap2+.
Thanks everybody for help with fixing the drivers.

Note that we can now also remove the unused plat/cpu.h from
smartreflex.c and isp.c as they will cause compile errors
with ARCH_MULTIPLATFORM enabled.

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:41 -08:00
Tony Lindgren
16d60bb86e ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage
Looks like we missed plat-omap/fb.c for cpu_is_omap usage
mach-omap2. This is the last user of cpu_is_omap, so let's
quickly fix it up so we can finally remove plat/cpu.h for
omap2lus.

We want to limit cpu_is_omap macro usage to mach-omap2 only so
we can make plat/cpu.h private. After this we can finally drop
plat/cpu.h for omap2+.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 10:50:40 -08:00
Maxime Ripard
68136b105c ARM: sunxi: Change device tree naming scheme for sunxi
There is several different SoCs sharing the sun5i codename: A10s, A12
and A13. Since there is enough differences to not consider those the
same SoCs, change a bit the naming scheme to reflect this.

Moreover, some boards like the olinuxino come in A10s and A13 variants,
which also share the same SoC codename.

So change the naming scheme to reflect both the codename and the market
name of the SoCs used in the dtsi and in the board files

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-17 10:04:31 -08:00
Linus Walleij
2cdda35067 ARM: ux500: fix missing include
Commit db298da2c3
"ARM: nomadik: move platform_data definition"
moved the Ux500-specific musb header from <mach/usb.h>
to <linux/platform_data/usb-musb-ux500.h>

However that makes some board code fail to compile
now:

CC      arch/arm/mach-ux500/board-mop500.o
linux/arch/arm/mach-ux500/cpu-db8500.c: In function 'u8500_init_devices':
linux/arch/arm/mach-ux500/cpu-db8500.c:226:2: error: implicit declaration of function 'ux500_add_usb' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [arch/arm/mach-ux500/cpu-db8500.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [arch/arm/mach-ux500] Error 2
make[2]: *** Waiting for unfinished jobs....

So fix this up by adding the proper include file that
appears to have been brought in implicitly one or another
way in the past.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-17 10:04:30 -08:00
Linus Walleij
761dc26d43 ARM: u300: delete custom pin hog code
With recent changes in the kernel, the MMCI and PL011 UART
drivers will autonomously request their pins to be muxed in,
so this machine-specific pin hogging code is just interfering
with the proper mechanism and causing regressions in the v3.8
kernel. Delete it and the problems go away.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-17 10:04:29 -08:00
Olof Johansson
0f600f40d7 Merge tag 'tegra-for-3.8-fixes-for-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into fixes
ARM: tegra: fixes for 3.8

This branch contains a few miscellaneous fixes that have shown up in the
last few weeks.

By Sivaram Nair (2) and Hiroshi Doyu (1)
via Stephen Warren
* tag 'tegra-for-3.8-fixes-for-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  amba: tegra-ahb: Fix warning w/o PM_SLEEP
  ARM: tegra: fix comment in dsib clk set_parent
  ARM: tegra: select correct parent clk for pll_p

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-17 10:04:27 -08:00
Olof Johansson
6a2461a49d ARM: davinci: fix build break due to missing include
arch/arm/mach-davinci/board-da850-evm.c: In function 'da850_evm_init':
arch/arm/mach-davinci/board-da850-evm.c:1516:2: error: implicit declaration of function 'sram_get_gen_pool' [-Werror=implicit-function-declaration]
arch/arm/mach-davinci/board-da850-evm.c:1516:31: warning: assignment makes pointer from integer without a cast [enabled by default]

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
2012-12-17 10:04:27 -08:00
Olof Johansson
d0c2e4e467 ARM: exynos: Fix warning due to missing 'inline' in stub
In file included from arch/arm/mach-exynos/clock-exynos5.c:29:0:
arch/arm/mach-exynos/common.h:28:12: warning: 'exynos_pm_late_initcall' defined but not used [-Wunused-function]

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
2012-12-17 10:04:26 -08:00
Linus Torvalds
3c2e81ef34 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull DRM updates from Dave Airlie:
 "This is the one and only next pull for 3.8, we had a regression we
  found last week, so I was waiting for that to resolve itself, and I
  ended up with some Intel fixes on top as well.

  Highlights:
   - new driver: nvidia tegra 20/30/hdmi support
   - radeon: add support for previously unused DMA engines, more HDMI
     regs, eviction speeds ups and fixes
   - i915: HSW support enable, agp removal on GEN6, seqno wrapping
   - exynos: IPP subsystem support (image post proc), HDMI
   - nouveau: display class reworking, nv20->40 z compression
   - ttm: start of locking fixes, rcu usage for lookups,
   - core: documentation updates, docbook integration, monotonic clock
     usage, move from connector to object properties"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (590 commits)
  drm/exynos: add gsc ipp driver
  drm/exynos: add rotator ipp driver
  drm/exynos: add fimc ipp driver
  drm/exynos: add iommu support for ipp
  drm/exynos: add ipp subsystem
  drm/exynos: support device tree for fimd
  radeon: fix regression with eviction since evict caching changes
  drm/radeon: add more pedantic checks in the CP DMA checker
  drm/radeon: bump version for CS ioctl support for async DMA
  drm/radeon: enable the async DMA rings in the CS ioctl
  drm/radeon: add VM CS parser support for async DMA on cayman/TN/SI
  drm/radeon/kms: add evergreen/cayman CS parser for async DMA (v2)
  drm/radeon/kms: add 6xx/7xx CS parser for async DMA (v2)
  drm/radeon: fix htile buffer size computation for command stream checker
  drm/radeon: fix fence locking in the pageflip callback
  drm/radeon: make indirect register access concurrency-safe
  drm/radeon: add W|RREG32_IDX for MM_INDEX|DATA based mmio accesss
  drm/exynos: support extended screen coordinate of fimd
  drm/exynos: fix x, y coordinates for right bottom pixel
  drm/exynos: fix fb offset calculation for plane
  ...
2012-12-17 08:26:17 -08:00
Fabio Estevam
027c0a6af4 ARM: imx: Move platform-mx2-emma to arch/arm/mach-imx/devices
Move platform-mx2-emma to arch/arm/mach-imx/devices and fix the following build
error:

make[2]: *** No rule to make target `arch/arm/mach-imx/devices/platform-mx2-emma.o', needed by `arch/arm/mach-imx/devices/built-in.o'.  Stop.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-12-17 10:58:52 +01:00
Sascha Hauer
69155fd66d ARM i.MX51 clock: Fix regression since enabling MIPI/HSP clocks
The MIPI/HSP clocks were recently turned on in the i.MX51 clock tree.
It turned out that the system does not work properly when the MIPI/HSP
clocks are enabled, but the IPU clock is disabled. This happens when
IPU support is disabled. In this case the IPU clock gets disabled when
the clock framework turns off unused clock in a late_initcall. This
is broken since:

| commit 9a2d4825a9
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Tue Jun 5 13:53:32 2012 +0200
|
|     ARM i.MX5: switch IPU clk support to devicetree bindings
|
|     The i.MX5 clk support has platform based clock bindings for the
|     IPU. IPU support is devicetree only, so move them over to devicetree
|     based bindings. Also, enable MIPI clocks which do not have a device
|     associated with, but still need to be enabled to do graphics on
|     i.MX51.

This patch fixes this by setting some reserved bits in the CCM as recommended
in the reference manual.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-17 10:51:45 +01:00
Fabio Estevam
3e24b05ba3 ARM: dts: mx27: Fix the AIPI bus for FEC
FEC controller is connected to AIPI2 bus.

Also fix the AIPI1 address range.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-12-17 10:49:41 +01:00
Pali Rohár
7605c0b0d3 ARM: OMAP: rx51: Register platform device for rx51_battery
This is needed to make the battery monitor actually work on Nokia N900.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-12-16 22:32:38 -08:00
Tony Lindgren
2cb85a7bd2 Merge branch 'omap-for-v3.8/fixes-for-merge-window' into omap-for-v3.8/fixes-for-merge-window-v2 2012-12-16 11:28:10 -08:00
Javier Martinez Canillas
d7dde8c191 ARM: OMAP2+: common: remove use of vram
commit 966458f OMAP: remove vram allocator

Removed the OMAP specific vram allocator but OMAP2 common was
still trying to use it and this lead to the following build error:

CC      arch/arm/mach-omap2/common.o
arch/arm/mach-omap2/common.c:19:23: fatal error: plat/vram.h: No such file or directory
compilation terminated.
make[1]: *** [arch/arm/mach-omap2/common.o] Error 1
make: *** [arch/arm/mach-omap2] Error 2

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-16 11:19:48 -08:00
Joerg Roedel
9c6ecf6a3a Merge branches 'iommu/fixes', 'dma-debug', 'x86/amd', 'x86/vt-d', 'arm/tegra' and 'arm/omap' into next 2012-12-16 12:24:09 +01:00
Pawel Moll
dad5451a32 ARM: 7605/1: vmlinux.lds: Move .notes section next to the rodata
The .notes, being read-only data by nature, were placed between
read-write .data and .bss. This was harmful in case of the XIP
kernel, as being placed in the RAM range, most likely far
from the ROM address, was inflating the XIP images.

Moving the .notes at the end of the read-only section
(consisting of .text, .rodata and unwind info) fixes the problem.

Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-16 10:04:24 +00:00
Alexander Shiyan
b8b499c86b ARM: 7602/1: Pass real "__machine_arch_type" variable to setup_machine_tags() procedure
This modification is needed to proper boot the custom machines with
the IDs that are not described in the mach-types.h table.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-16 10:04:24 +00:00
Shawn Guo
4beba08ba1 ARM: 7600/1: include CONFIG_DEBUG_LL_INCLUDE rather than mach/debug-macro.S
Commit 91a9fec (ARM: move debug macros to common location) moves
arch/arm/kernel/debug.S and arch/arm/kernel/head.S to
CONFIG_DEBUG_LL_INCLUDE, but leaves arch/arm/boot/compressed/head.S
still with mach/debug-macro.S.  This causes the following build error
on platforms that moved to new DEBUG_LL inclusion mechanism, when
arch/arm/boot/compressed/head.S is compiled with DEBUG turned on.

  AS      arch/arm/boot/compressed/head.o
arch/arm/boot/compressed/head.S:49:30: fatal error: mach/debug-macro.S: No such file or directory
compilation terminated.

Fix the problem by replacing mach/debug-macro.S inclusion with
CONFIG_DEBUG_LL_INCLUDE one.

Reported-by: Steev Klimaszewski <steev@genesi-usa.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-16 10:04:23 +00:00
Linus Torvalds
2b8318881d fbdev changes for 3.8:
OMAPDSS changes, including:
 - use dynanic debug prints
 - OMAP platform dependency removals
 - Creation of compat-layer, helping us to improve omapdrm
 - Misc cleanups, aiming to make omadss more in line with the upcoming common
   display framework
 
 Exynos DP changes for the 3.8 merge window:
 - Device Tree support for Samsung Exynos DP
 - SW Link training is cleaned up.
 - HPD interrupt is supported.
 
 Samsung Framebuffer changes for the 3.8 merge window:
 - The bit definitions of header file are updated.
 - Some minor typos are fixed.
 - Some minor bugs of s3c_fb_check_var() are fixed.
 
 FB related changes for SH Mobile, Freescale DIU
 
 Add support for the Solomon SSD1307 OLED Controller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyvniAAoJEPo9qoy8lh71IqkQAK9LkVjVk6UQRT2/b39hPF6i
 PKPRNYxpLxX5u98hiqQfweukGkuC/cmsAJOh5UwX1lFg0TNua8CEYg0iuHgUtLWE
 gi+HNUhHfGx1+a9yQpTKsiheq7r88IjpghFGahnFhpE4kDzhIROom7B39x8bx9gs
 1vnCptmcIq0IlMlmjIktTHw8R36Fd/8xDVEhEtDccxT9AJSePnKBY8SBuRjiyJfP
 QvXnd131kmHdshQbSVetsEwI1a9NJ9Z6MMRiQK3vtDiBJ7QHUw8wD/+kdR68gQxZ
 NqTC/s478dvx/bR5CIXHrXxQZGfOCJ0GFzT1rlcRMxECcF0dQYNr3Hid3Zas+mPZ
 hABpEJE7nV7LoDGhW3oIWPt6MZVFED/HE0F5QrG3/PWYs5UpTwkI9UTkB8Bx6LcA
 H9ypHzFaOT1SK2/jln9pAfYgo/ITCRf08gcxBvGZUPcybrQy+kbVPdYgDn09cDhR
 u6ax3k/PMF/6JRdpVRNxLaoEHw/G6vtNjoeRJivZzuIOmGDfGwADGcEnrcZEM3NM
 muOjk8TfTJgK+gzWleOfr9CQGiWWp1Tht9vF6TSApq4SEqmOK81EZpucrMXY0t6r
 9+JmFzS1/+75NeY2YjgHCuqRaqVSMiyyOp1eYV9JIY14rKINbj77OHX8xaMm+Leg
 ZU4tirie/oEALaIJUann
 =KVPX
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux

Pull fbdev changes from Tomi Valkeinen:
 "OMAPDSS changes, including:
   - use dynanic debug prints
   - OMAP platform dependency removals
   - Creation of compat-layer, helping us to improve omapdrm
   - Misc cleanups, aiming to make omadss more in line with the upcoming
     common display framework

  Exynos DP changes for the 3.8 merge window:
   - Device Tree support for Samsung Exynos DP
   - SW Link training is cleaned up.
   - HPD interrupt is supported.

  Samsung Framebuffer changes for the 3.8 merge window:
   - The bit definitions of header file are updated.
   - Some minor typos are fixed.
   - Some minor bugs of s3c_fb_check_var() are fixed.

  FB related changes for SH Mobile, Freescale DIU

  Add support for the Solomon SSD1307 OLED Controller"

* tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits)
  OMAPDSS: fix TV-out issue with DSI PLL
  Revert "OMAPFB: simplify locking"
  OMAPFB: remove silly loop in fb2display()
  OMAPFB: fix error handling in omapfb_find_best_mode()
  OMAPFB: use devm_kzalloc to allocate omapfb2_device
  OMAPDSS: DISPC: remove dispc fck uses
  OMAPDSS: DISPC: get dss clock rate from dss driver
  drivers/video/console/softcursor.c: remove redundant NULL check before kfree()
  drivers/video: add support for the Solomon SSD1307 OLED Controller
  OMAPDSS: use omapdss_compat_init() in other drivers
  OMAPDSS: export dispc functions
  OMAPDSS: export dss_feat functions
  OMAPDSS: export dss_mgr_ops functions
  OMAPDSS: separate compat files in the Makefile
  OMAPDSS: move display sysfs init to compat layer
  OMAPDSS: DPI: use dispc's check_timings
  OMAPDSS: DISPC: add dispc_ovl_check()
  OMAPDSS: move irq handling to dispc-compat
  OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
  OMAPDSS: move blocking mgr enable/disable to compat layer
  ...

Conflicts:
	arch/arm/mach-davinci/devices-da8xx.c
	arch/arm/plat-omap/common.c
	drivers/media/platform/omap/omap_vout.c
2012-12-15 13:03:48 -08:00
Mark Brown
326b06a8a9 Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2012-12-15 23:56:43 +09:00
Bo Shen
315656bc3b ASoC: atmel-ssc: change disable to disable in dts node
Change the value of status to disabled to keep the consistent

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-15 23:51:19 +09:00
Paul Walmsley
9db316b6bf ARM: OMAP3/4: cpuidle: fix sparse and checkpatch warnings
Fix the following sparse warnings in the OMAP3/4 CPUIdle code:

arch/arm/mach-omap2/cpuidle34xx.c:272:1: warning: symbol 'omap3_idle_dev' was not declared. Should it be static?
arch/arm/mach-omap2/cpuidle34xx.c:274:23: warning: symbol 'omap3_idle_driver' was not declared. Should it be static?
arch/arm/mach-omap2/cpuidle44xx.c:164:1: warning: symbol 'omap4_idle_dev' was not declared. Should it be static?
arch/arm/mach-omap2/cpuidle44xx.c:166:23: warning: symbol 'omap4_idle_driver' was not declared. Should it be static?

Also fix the following checkpatch warnings:

WARNING: please, no space before tabs
#44: FILE: arch/arm/mach-omap2/cpuidle34xx.c:105:
+^I.name = ^I"omap3_idle",$

WARNING: please, no space before tabs
#45: FILE: arch/arm/mach-omap2/cpuidle34xx.c:106:
+^I.owner = ^ITHIS_MODULE,$

ERROR: code indent should use tabs where possible
#211: FILE: arch/arm/mach-omap2/cpuidle44xx.c:74:
+                        /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */$


Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-12-15 01:41:24 -07:00
Paul Walmsley
b8675e2c04 ARM: OMAP4: clock data: DPLLs are missing bypass clocks in their parent lists
Booting OMAP4460 Pandaboard ES with a recent u-boot results in this
warning:

WARNING: at arch/arm/mach-omap2/dpll3xxx.c:427 omap3_noncore_dpll_enable+0xf4/0x110()

The OMAP4 DPLL parent clock names only listed the reference clocks,
not the bypass clocks.  Fix by adding the bypass clocks to the DPLL
parent lists.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mike Turquette <mturquette@linaro.org>
2012-12-15 01:41:24 -07:00
Paul Walmsley
628a37d40e ARM: OMAP4: clock data: div_iva_hs_clk is a power-of-two divider
The OMAP4 clock divider "div_iva_hs_clk" is listed in the clock data
as an OMAP HSDIVIDER, but it's actually a power-of-two divider.  This
causes a warning during boot on an OMAP4460 Pandaboard-ES with a
recent u-boot:

WARNING: at arch/arm/mach-omap2/clkt_clksel.c:143 omap2_clksel_recalc+0xf4/0x12c()
clock: div_iva_hs_clk: could not find fieldval 0 for parent dpll_core_m5x2_ck

Fix by converting the data for this clock to a power-of-two divider.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mike Turquette <mturquette@linaro.org>
2012-12-15 01:41:24 -07:00
Jon Hunter
29f0667f92 ARM: OMAP4: Fix EMU clock domain always on
Commit d043d87 (ARM: OMAP2+: clockdomain: bypass clockdomain handling
when disabling unused clks) skips the decrementing of a clock-domains
use count if the clocks use count is zero. However, for OMAP4 devices
this is causing the EMU clock-domain to be stuck ON as the use count is
not getting decremented correctly.

The scenario that leads to this problem is described below ...

omap_hwmod_setup_all
--> _setup
    --> clkdm_hwmod_enable
    	--> EMU clock domain usecount = 1
    --> _enable_clocks
        --> clk_enable
	    --> trace_clk_div_div usecount = 1
            --> clkdm_hwmod_enable
    	        --> EMU clock domain usecount = 2
--> _idle
    --> _disable_clocks
	--> clk_disable
            --> trace_clk_div_div usecount = 0
            --> clkdm_hwmod_disable
                --> skips decrement of EMU clock domain usecount
		    because trace_clk_div_div is 0!
    	        --> EMU clock domain usecount = 2
    --> clkdm_hwmod_disable
    	--> EMU clock domain usecount = 1

Hence, due to the order that a clocks use count is decremented and the
clock domain is disabled, it is possible that the clock domain can have
a non-zero use count when the actual clock has a use count of 0.
Therefore, we should only bypass the clock-domain handling when both the
clock-domain and clock in the clock-domain have a use count of 0 and
warn when the clock-domain has a zero use count and the clock has a
non-zero use count.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: fixed checkpatch warning]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-12-15 01:35:54 -07:00
Jon Hunter
8c197ccfb6 ARM: OMAP4460: Workaround ABE DPLL failing to turn-on
With the latest mainline u-boot bootloader (v2012.10), timers (5-8) in
the ABE power domain are failing to turn-on. The timers never come out
of the disabled state when setting the module-mode field to enable.

The problem was exposed when u-boot was updated to NOT configure and
lock the ABE DPLL on start-up. If the ABE DPLL is configured and locked
by u-boot the problem does not occur. However, if the ABE DPLL is in the
idle low-power bypass state and we attempt to enable a timer in the ABE
power domain, it remains stuck in the disabled state. It appears to be a
problem the timer interface clock as this comes from the ABE DPLL.

If we place the ABE DPLL in the MN-bypass state and not the idle
low-power state, then this problem is not seen.

This problem only appears to occur on OMAP4460 and not OMAP4430.

Workaround this problem by locking the ABE DPLL for OMAP4460 in the
kernel on boot. By locking the ABE DPLL, when clocks from the ABE DPLL
are not being requested the DPLL will transition into a low-power stop
mode.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-12-15 01:35:50 -07:00
Jon Hunter
3ff51ed828 ARM: OMAP4: Enhance support for DPLLs with 4X multiplier
On OMAP4 devices, the ABE DPLL has an internal 4X multiplier that can
be enabled or disabled in addition to the standard configurable
multiplier (M) for OMAP DPLLs. When configuring the ABE DPLL the 4X
multiplier is accounted for by checking to see whether it is enabled or
not. However, when calculating a new rate we only check to see if the
rate can be achieved with the current setting for the 4X multiplier.
Enhance the round_rate() function for such DPLLs to see if the rate
can be achieved with the 4X multiplier if it cannot be achieved without
the 4X multiplier.

This change is necessary, because when using the 32kHz clock as the
source clock for the ABE DPLL, the default DPLL frequency for the ABE
DPLL cannot be achieved without enabling the 4X multiplier.

When using the 32kHz clock as the source clock for the ABE DPLL and
attempting to lock the DPLL to 98.304MHz (default frequency), it was
found that the DPLL would fail to lock if the low-power mode for the DPLL
was not enabled. From reviewing boot-loader settings that configure the
ABE DPLL it was found that the low-power mode is enabled when using the
32kHz clock source, however, the documentation for OMAP does not state
that this is a requirement. Therefore, introduce a new function for
OMAP4 devices to see if low-power mode can be enabled when calculating a
new rate to ensure the DPLL will lock.

New variables for the last calculated 4X multiplier and low-power
setting have been added to the dpll data structure as well as variables
defining the bit mask for enabling these features via the DPLL's
control_reg. It is possible that we could eliminate these bit masks from
the dpll data structure as these bit masks are not unique to OMAP4, if
it is preferred.

The function omap3_noncore_program_dpll() has been updated to avoid
passing the calculated values for the multiplier (M) and divider (N) as
these are stored in the clk structure.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-12-15 01:35:46 -07:00
Jon Hunter
9b4fcc8694 ARM: OMAP4: Add function table for non-M4X dplls
Currently all OMAP4 non-core DPLLs use the same function table for
configuring DPLLs. For these DPLLs, the function
omap4_dpll_regm4xen_recalc() is used to recalculate the DPLL rate and
the function omap4_dpll_regm4xen_round_rate() is used to calculate the
closest rate to that requested. However, these omap4_dpll_regm4xen_xxx()
functions are only applicable to the ABE DPLL and not the other non-core
DPLLs. Therefore, add a new function table for non-core DPLLs that do
not include the 4X-multiplier (M4X).

Please note that using these omap4_dpll_regm4x_xxx() function works for
the non-M4X DPLLs today because we only check to see if the 4X
multiplier is enabled when calculating the rate. However, it is planned
that the dpll functions will be enhanced to enable the 4X multiplier as
necessary (in order to achieve the requested rate) and so calling these
functions for non-M4X dplls will no longer work.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-12-15 01:35:43 -07:00
Jon Hunter
ba68c7eff5 ARM: OMAP4: Update timer clock aliases
Commit "ARM: dts: OMAP4: Update timer addresses" updated the device-tree
names of the OMAP4 timers 5-7 because the default address for the timers
was changed from the L3 address to the MPU private address. When booting
with device-tree, this introduces a regression when attempting to set
the parent clock of timers 5-7 to the sys_clk_div_ck. Therefore, update
the clock aliases for timer 5-7 to reflect the updated device-tree name
for the timers.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: updated to apply after the CCF conversion]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-12-15 01:35:39 -07:00
Linus Torvalds
c2714334b9 ARM: arm-soc: Updates for Marvell mvebu/kirkwood
This is a branch with updates for Marvell's mvebu/kirkwood platforms. They
 came in late-ish, and were heavily interdependent such that it didn't
 make sense to split them up across the cross-platform topic branches. So
 here they are (for the second release in a row) in a branch on their own.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQy5i9AAoJEIwa5zzehBx3ZskP/2wxjbwEaNdnR+7j8595bTaa
 GYq8qJ4lUCOKmSqp3bQkg/Plm2D88p78BO5qTm2io527gl10HemzCiGaejclujIw
 sDFZPAE8K0Z8p0gQcBNlRZNuI3J1N6IKRqYH5SIJ2vWmBMfO7nKRR9nmTiDpm5bx
 IcuKX2u/mhyXWN+F0EcHqcupH1K+mdzyGdIQk80Tyqni+UTN+pd0efLM6WL4SFJM
 5fj64dDFpVDA8t+O2Avz8p+lx07vkSy2wIXWt7Ik9BVtsyZQecn+9lpl8FvcrSK/
 MgL3QO4kqDpJDs88M7DJURU1/EdsWZc32M63avctaWnGWItQAbOJYBDmZTlng08x
 ZGrKOgf/I6le7wEpnzdag9ymI/rAL8I0755FkfXxf1R7/X40b+t8/61J/ddOKTDs
 1sTVt+eKyyIMWle4V4zENa03goVBApCIEXcmnuFisFNbBY6azV31inJEp/3PvpgE
 GeMBfxBDkvn+03LkRFcZlhTeDsNTdctD+sfgrNPaQf5bZGIvEz87vgfNTIiaU3GA
 Vd5aiainVDQgmpoFfRG6391gdFlF2l9d67LoG4ClCjn4WL+UxcTRuzBW/liORpUO
 E7CwMHtPq6eoGKywiKMFRzY2QRIKZRkxrC2PCJ/1V9mbIGwgaD/3BQ2/czwrnc8q
 1gnxWx8E5SKEGcDJXD+6
 =7luC
 -----END PGP SIGNATURE-----

Merge tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson:
 "This is a branch with updates for Marvell's mvebu/kirkwood platforms.
  They came in late-ish, and were heavily interdependent such that it
  didn't make sense to split them up across the cross-platform topic
  branches.  So here they are (for the second release in a row) in a
  branch on their own."

* tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits)
  arm: l2x0: add aurora related properties to OF binding
  arm: mvebu: add Aurora L2 Cache Controller to the DT
  arm: mvebu: add L2 cache support
  dma: mv_xor: fix error handling path
  dma: mv_xor: fix error checking of irq_of_parse_and_map()
  dma: mv_xor: use request_irq() instead of devm_request_irq()
  dma: mv_xor: clear the window override control registers
  arm: mvebu: fix address decoding armada_cfg_base() function
  ARM: mvebu: update defconfig with I2C and RTC support
  ARM: mvebu: Add SATA support for OpenBlocks AX3-4
  ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C on OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C controllers in Armada 370/XP
  arm: mvebu: Add hardware I/O Coherency support
  arm: plat-orion: Add coherency attribute when setup mbus target
  arm: dma mapping: Export a dma ops function arm_dma_set_mask
  arm: mvebu: Add SMP support for Armada XP
  arm: mm: Add support for PJ4B cpu and init routines
  arm: mvebu: Add IPI support via doorbells
  arm: mvebu: Add initial support for power managmement service unit
  ...
2012-12-14 14:54:26 -08:00
Tony Lindgren
d9ba573718 ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h
We need to move this file to allow ARM multiplatform configurations
to build for omap2+. This can now be done as this file now only
contains platform_data.

cc: Russell King <linux@arm.linux.org.uk>
cc: Alan Cox <alan@linux.intel.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Govindraj.R <govindraj.raja@ti.com>
cc: Kevin Hilman <khilman@ti.com>
cc: linux-serial@vger.kernel.org
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 14:50:09 -08:00
Jon Hunter
30a6998ef4 ARM: dts: Add build target for omap4-panda-a4
Commit 0d9250c (ARM: dts: omap4-panda: Add pinmux configuration for
HDMI) added a new device-tree source file for Rev A4 of the OMAP4430
Panda board but it did not add this version to the makefile. Hence,
add this file to the makefile.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 14:49:53 -08:00
Jon Hunter
d695c82f25 ARM: dts: OMAP2420: Correct H4 board memory size
The system memory node for the OMAP2420 H4 was incorrectly defined as
start address followed by end address, instead of start address and
size. No noticable side-effects were observed but fix this for
correctness.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 14:49:53 -08:00
Linus Torvalds
0beb58783f ARM: arm-soc: Device-tree updates, take 2
This branch contains device-tree updates for the SPEAr platform.
 They had dependencies on earlier branches from this merge window,
 which is why they were broken out in a separate branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQy5h1AAoJEIwa5zzehBx3TukP/ijMApMtSf5NuGfjeHz0eh18
 JdWVa+89Bgrf1ggVWrnrdfMjHVjsQlu/pwGQF9BY3QmmVlyQIjcxEUMmZ2tw69rw
 wMu17S40Hv746XHB7zkg8HDMzYL7btwxUeo8hX4NUQZSaL82VVB/RndZyIkWQ11q
 FqUG1CS4tunw75sedbJI0NukV9rHF29XYTfAKOqpuBbHC+fNAZDSZIoHNQSJmdQi
 lUc8uw0WD9cZBJN+yt4qKUv6B07Tkc8yPCKiDj+onwEddWahHsLEO+q2e15Llb6x
 qThG2tgtC4WqqrGyxjZHgIwy/uis6v0jerN9CbUTOUeJP3XosC9xg4novWvH6vrK
 K3iQnC5Pl7FGIxIjJoLbttbkVTz9SqLuFa31cAdjTPODC2D7trPKqFoJMQA2DjU3
 XqTJc/Q6Xbgee1qGWjdulDTFBK6zsqbdSC/uB/Ro6FRsOToypdB4AVQo4gl9I5g3
 dUC6ZghgOlbff0pFazSsfMDQOmzyBq4694Xnosq7C/KkLL1HyRe8qqEg/gBfPcQZ
 NKXzoIrGIR1pTs9VN00ScBMWtbJWd9OkVMc3aGUQZA+gIUE2ExNfzls0n+1pAhAb
 god1Aq0s1ZWqGSeguENRGMN/lUYYN8TCeOlTIY3eKPxw9ybwSxOdCyH2iLlXOYHj
 l1J6msYWvhULWpLQST7r
 =iK4W
 -----END PGP SIGNATURE-----

Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device-tree updates, take 2, from Olof Johansson:
 "This branch contains device-tree updates for the SPEAr platform.  They
  had dependencies on earlier branches from this merge window, which is
  why they were broken out in a separate branch."

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: SPEAr3xx: Shirq: Move shirq controller out of plat/
  ARM: SPEAr320: DT: Add SPEAr 320 HMI board support
  ARM: SPEAr3xx: DT: add shirq node for interrupt multiplexor
  ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT
  ARM: SPEAr1310: Fix AUXDATA for compact flash controller
  ARM: SPEAr13xx: Remove fields not required for ssp controller
  ARM: SPEAr1310: Move 1310 specific misc register into machine specific files
  ARM: SPEAr: DT: Update device nodes
  ARM: SPEAr: DT: add uart state to fix warning
  ARM: SPEAr: DT: Modify DT bindings for STMMAC
  ARM: SPEAr: DT: Fix existing DT support
  ARM: SPEAr: DT: Update partition info for MTD devices
  ARM: SPEAr: DT: Update pinctrl list
  ARM: SPEAr13xx: DT: Add spics gpio controller nodes
2012-12-14 14:42:53 -08:00
Linus Torvalds
6a57d104c8 ARM: arm-soc: SoC updates, take 2
This is the second batch of SoC updates for the 3.8 merge window,
 containing parts that had dependencies on earlier branches such that we
 couldn't include them with the first branch.
 
 These are general updates for Samsung Exynos, Renesas/shmobile and a
 topic branch that adds SMP support to Altera's socfpga platform.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQy5gxAAoJEIwa5zzehBx3ab0P/1SSJYLNcn8rieIALLZaSH17
 lxVwyv/OMLmRual0eVjXN+mcNuAc05gemLUSNSrdFPrHhEGSqFz8x0C/A6o3Ovw/
 OxNNX3rQiZP86vKRVmT/did7yEkMmleKng19uOyBXN2p7f6lh01Y5NFTVE1dWiZG
 TJPEgWI9mrarUMarL90fBu7AlXPNJwfG0opmT5QWuZmcLlaRXFTqFU2U08e5rPp5
 9yrTn3fQCDx+eT7qUBiZfuH6sesMnofYWDNJSvV/aPI4UYsEcK6KyJUL8LBuTLQ7
 9LHqsJNHLnlqxDsq6N/B0/pno2rhgdbkPPtl0c0xw35anHWW86IUgWgSCbu16LDZ
 uKDV31tIsx8yhsm8QkSKwzEjVnablhVYORGByVkNYBVSgMobdxBNFog6iX9NNQxJ
 3Z1K0i65YPffDoK7CJorIxcxyvBuBR/KueUFpzEK05xzJlvhPK2NQSY5Je0qEaA3
 tZYt0WfMtLC0huhLxEL/xNXuErqvj18kOSal3CHmg2LWVaKCFKNuY/B71yF7xaTc
 qN3RGJdb5Dyh49CCzXVBSAKJozc+pB8RauGnM//UQf49lmFzQ7oaQjxNjS3zQrjA
 3LsbJ8cDbwWVKb8yRvR8BtnJl81yE58D6R/gEPjH33v4jRPLUONLyyhVI57Rf0tV
 SFjd8wRlsFakOQ4qnG/B
 =77Ct
 -----END PGP SIGNATURE-----

Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Soc updates, take 2, from Olof Johansson:
 "This is the second batch of SoC updates for the 3.8 merge window,
  containing parts that had dependencies on earlier branches such that
  we couldn't include them with the first branch.

  These are general updates for Samsung Exynos, Renesas/shmobile and a
  topic branch that adds SMP support to Altera's socfpga platform."

Fix up conflicts mostly as per Olof.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: EXYNOS: Clock settings for SATA and SATA PHY
  ARM: EXYNOS: Add ARM down clock support
  ARM: EXYNOS: Fix i2c suspend/resume for legacy controller
  ARM: EXYNOS: Add aliases for i2c controller
  ARM: EXYNOS: Setup legacy i2c controller interrupts
  sh: clkfwk: fixup unsed variable warning
  Revert "ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode"
  Revert "ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode"
  Revert "ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode"
  ARM: highbank: use common debug_ll_io_init
  ARM: shmobile: sh7372: sh7372_fsiXck_clk become non-global
  ARM: shmobile: sh7372: remove fsidivx clock
  ARM: socfpga: mark secondary_trampoline as cpuinit
  socfpga: map uart into virtual address space so that early_printk() works
  ARM: socfpga: fix build break for allyesconfig
  ARM: socfpga: Enable SMP for socfpga
  ARM: EXYNOS: Add dp clock support for EXYNOS5
  ARM: SAMSUNG: call clk_get_rate for debugfs rate files
  ARM: SAMSUNG: add clock_tree debugfs file in clock
2012-12-14 14:38:28 -08:00
Olof Johansson
c91321e8ff ARM: arm-soc: Merge branch 'next/smp' into next/soc2
Merging in the smp-on-socfpga branch into soc2 since the topics are similar
and it's a short branch in the first place.

* next/smp:
  ARM: socfpga: mark secondary_trampoline as cpuinit
  socfpga: map uart into virtual address space so that early_printk() works
  ARM: socfpga: fix build break for allyesconfig
  ARM: socfpga: Enable SMP for socfpga

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-14 13:17:01 -08:00
Roger Quadros
63b68901df mfd: omap-usb-host: get rid of cpu_is_omap..() macros
Instead of using cpu_is_omap..() macros in the device driver we
rely on information provided in the platform data.

The only information we need is whether the USB Host module has
a single ULPI bypass control bit for all ports or individual bypass
control bits for each port. OMAP3 REV2.1 and earlier have the former.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
[tony@atomide.com: updated to remove plat/cpu.h]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 11:48:06 -08:00
Jon Hunter
657b9deeed ARM: OMAP: Remove debug-devices.c
The OMAP2420 H4 board was the only board using the
plat-omap/debug-devices.c code for configuring ethernet support. Now
that OMAP2420 H4 has been migrated to use the generic gpmc code for
configuring ethernet support, the debug-devices.c file is no longer
used and so remove it and its header file.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 11:48:06 -08:00
Jon Hunter
86c3596085 ARM: OMAP2420: Fix ethernet support for OMAP2420 H4
Ethernet is not currently working on the OMAP2420 H4 board. In commit
f604931 (ARM: OMAP: abstract debug card setup (smc, leds)) the function
h4_init_smc91x() that initialised the ethernet controller was renamed to
h4_init_debug() but was never called when initialising the board.

Adding a call to h4_init_debug() fixes ethernet support, however,
instead of using the legacy H4 code migrate the H4 to use the
gpmc_smc91x_init() function instead and remove the legacy H4 code.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 11:48:06 -08:00
Oleg Matcovschi
421e845099 OMAP2+: mux: Fixed gpio mux mode analysis
OMAP_MODE_GPIO() macro verified only OMAP_MUX_MODE4.
It is not correct for following platforms:
    2430 - gpio mux mode 3
    44xx - gpio mux mode 3
    54xx - gpio mux mode 6

Patch reserves first 3 bits in partition flags for storing gpio mux
mode in same format as stored in control pad register.
Modified OMAP_MODE_GPIO() macro to handle all possible cases of gpio mux mode.
Modified omap_mux_init() flags of omap34xx to include OMAP_MUX_GPIO_IN_MODE4.

Signed-off-by: Oleg Matcovschi <oleg.matcovschi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 11:11:34 -08:00
Tomi Valkeinen
ca2e16faa7 OMAP: board-files: fix i2c_bus for tfp410
The i2c handling in tfp410 driver, which handles converting parallel RGB
to DVI, was changed in 958f2717b8
(OMAPDSS: TFP410: pdata rewrite). The patch changed what value the
driver considers as invalid/undefined.  Before the patch, 0 was the
invalid value, but as 0 is a valid bus number, the patch changed this to
-1.

However, the fact was missed that many board files do not define the bus
number at all, thus it's left to 0. This causes the driver to fail to
get the i2c bus, exiting from the driver's probe with an error, meaning
that the DVI output does not work for those boards.

This patch fixes the issue by changing the i2c_bus number field in the
driver's platform data from u16 to int, and setting the bus number to -1
in the board files for the boards that did not define the bus. The
exception is devkit8000, for which the bus is set to 1, which is the
correct bus for that board.

The bug exists in v3.5+ kernels.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Thomas Weber <thomas@tomweber.eu>
Cc: Thomas Weber <thomas@tomweber.eu>
Cc: <stable@vger.kernel.org> # v3.5+
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 11:10:59 -08:00
Vaibhav Hiremath
bf85f205d9 ARM: OMAP2+: Fix sparse warnings in timer.c
Sparse generates the following warnings when compiling mach-omap2/timer.c.

  CHECK   arch/arm/mach-omap2/timer.c
  arch/arm/mach-omap2/timer.c:193:13: warning: symbol 'omap_dmtimer_init'
  was not declared. Should it be static?
  arch/arm/mach-omap2/timer.c:213:12: warning: symbol
  'omap_dm_timer_get_errata' was not declared. Should it be static?

Add static to function declaration to fix warnings.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
2012-12-14 10:14:55 -06:00
Jon Hunter
e0c3e27ce1 ARM: AM335x: Fix warning in timer.c
When compiling the kernel with configuration options ...

 # CONFIG_ARCH_OMAP2 is not set
 # CONFIG_ARCH_OMAP3 is not set
 # CONFIG_ARCH_OMAP4 is not set
 # CONFIG_SOC_OMAP5 is not set
 CONFIG_SOC_AM33XX=y

 ... the following build warning is seen.

  CC      arch/arm/mach-omap2/timer.o
  arch/arm/mach-omap2/timer.c:395:19: warning: ‘omap2_sync32k_clocksource_init’
  	defined but not used [-Wunused-function]

This issue was introduced by commit 6f80b3b (ARM: OMAP2+: timer: remove
CONFIG_OMAP_32K_TIMER) where the omap2_sync32k_clocksource_init() is no
longer referenced by the timer initialisation function for the AM335x
device as it has no 32k-sync timer.

Fix this by adding the "__maybe_unused" compiler directive to the
omap2_sync32k_clocksource_init() function to indicate that this function
may be used for certain configurations.

Cc: Igor Grinberg <grinberg@compulab.co.il>

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
2012-12-14 10:14:50 -06:00
Jon Hunter
34cceb7464 ARM: OMAP2+: Fix realtime_counter_init warning in timer.c
In commit fa6d79d (ARM: OMAP: Add initialisation for the real-time
counter), the function realtime_counter_init() was added. However, if
the kernel configuration option CONFIG_SOC_OMAP5 is not selected then
the following compiler warning is observed.

  CC      arch/arm/mach-omap2/timer.o
  arch/arm/mach-omap2/timer.c:489:20: warning: ‘realtime_counter_init’
  defined but not used [-Wunused-function]

Commit fa6d79d also introduced the kernel configuration option
CONFIG_SOC_HAS_REALTIME_COUNTER. If this option is not selected then the
a stub function for realtime_counter_init() is defined.

For non-OMAP5 devices, there is no realtime counter and so
realtime_counter_init() function and stub function are not used for
these devices. Therefore, fix this warning by only allowing the kernel
configuration option CONFIG_SOC_HAS_REALTIME_COUNTER to be enabled for
OMAP5 devices.

Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-12-14 10:14:16 -06:00
Linus Torvalds
7313264b89 Highlights:
- Two new drivers from Pali Rohár and N900 hackers: rx51_battery and
   bq2415x_charger. The drivers are a part of a solution to replace the
   proprietary Nokia BME stack;
 
 - Power supply core now registers devices with a thermal cooling
   subsystem, so we can now automatically throttle charging. Thanks to
   Ramakrishna Pallala!
 
 - Device tree support for ab8500 and max8925_power drivers;
 
 - Random fixups and enhancements for a bunch of drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyFGdAAoJEGgI9fZJve1bYy8P/iu4XRL2kNwmPD7fMO+bZSao
 xCSi8zRCnOtDutB48MQXIDTi1+I64+Qqq5xTuHW5n/T0zJ88biGBZfmJLjM88oQ4
 ZqfO/axT6/MNFXTQtxEvXtn/AoM6lp9ZLmIbs7mkSpcnuG8iY5eovKfeyyNiAoGh
 W6ISc9d1zZl8JYZXkkX4y5uxsH/t34rPjWJqygMulJrVdePpC9fNWwDYnul6T7iF
 /bbqIH/j88HSYNDN518dv/ot+OfPn0vuxD4WzGAqC7ddHICtuaw8TBfXHmr6j4Mf
 o9ytC/dH+AQ6Tcs+h7mbz/dfL4Gs9JK2LgRX2z1DtFa6uTw5jwEtZSuDF4DKovEg
 71T67dsHDKJkQgGMDfDw1BrlLjQr8hkaWroF8CdmbRO0rRsfKamLQANG7mGkSu8B
 l1W0ZzWEbHDteNB/wCkjoncXlcqoA8YiplyVSqf38aP8YuaeHMR3LRGLFwgXK3pB
 lELh3cYSYLVpcqUgkRWcPrCUnLA2CkQy2B4INj5jFZilux7DzyIHMhWI2OuUs2rH
 1rwTYO91gTVONuagZn8+lmsjs+Yq1n2BcyrGMG2+ZYzruFaQ+brQsCbQR0hdRuaU
 zWLENqwGJ/++XrFgw3/5orMZIZQzL/yq+MbIXtrgKcFRWwoxyzJuH63RMQf3S6yy
 hxi7pYQmb9if+HPJZVVg
 =Bb5O
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6

Pull battery subsystem updates from Anton Vorontsov:
 "Highlights:

   - Two new drivers from Pali Rohár and N900 hackers: rx51_battery and
     bq2415x_charger.  The drivers are a part of a solution to replace
     the proprietary Nokia BME stack

   - Power supply core now registers devices with a thermal cooling
     subsystem, so we can now automatically throttle charging.  Thanks
     to Ramakrishna Pallala!

   - Device tree support for ab8500 and max8925_power drivers

   - Random fixups and enhancements for a bunch of drivers."

* tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6: (22 commits)
  max8925_power: Add support for device-tree initialization
  ab8500: Add devicetree support for chargalg
  ab8500: Add devicetree support for charger
  ab8500: Add devicetree support for btemp
  ab8500: Add devicetree support for fuelgauge
  twl4030_charger: Change TWL4030_MODULE_* ids to TWL_MODULE_*
  jz4740-battery: Use devm_request_and_ioremap
  jz4740-battery: Use devm_kzalloc
  bq27x00_battery: Fixup nominal available capacity reporting
  bq2415x_charger: Fix style issues
  bq2415x_charger: Add Kconfig/Makefile entries
  power_supply: Add bq2415x charger driver
  power_supply: Add new Nokia RX-51 (N900) power supply battery driver
  max17042_battery: Fix missing verify_model_lock() return value check
  ds2782_battery: Fix signedness bug in ds278x_read_reg16()
  lp8788-charger: Fix ADC channel names
  lp8788-charger: Fix wrong ADC conversion
  lp8788-charger: Use consumer device name on setting IIO channels
  power_supply: Register power supply for thermal cooling device
  power_supply: Add support for CHARGE_CONTROL_* attributes
  ...
2012-12-13 19:26:04 -08:00
Linus Torvalds
d8c532c407 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:

 - Missing MAINTAINERS entries were added for several drivers

 - Adds V4L2 support for DMABUF handling, allowing zero-copy buffer
   sharing between V4L2 devices and GPU

 - Got rid of all warnings when compiling with W=1 on x86

 - Add a new driver for Exynos hardware (s3c-camif)

 - Several bug fixes, cleanups and driver improvements

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (243 commits)
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] omap3isp: Prepare/unprepare clocks before/after enable/disable
  [media] omap3isp: preview: Add support for 8-bit formats at the sink pad
  [media] omap3isp: Replace printk with dev_*
  [media] omap3isp: Find source pad from external entity
  [media] omap3isp: Configure CSI-2 phy based on platform data
  [media] omap3isp: Add PHY routing configuration
  [media] omap3isp: Add CSI configuration registers from control block to ISP resources
  [media] omap3isp: Remove unneeded module memory address definitions
  [media] omap3isp: Use monotonic timestamps for statistics buffers
  [media] uvcvideo: Fix control value clamping for unsigned integer controls
  [media] uvcvideo: Mark first output terminal as default video node
  [media] uvcvideo: Add VIDIOC_[GS]_PRIORITY support
  [media] uvcvideo: Return -ENOTTY for unsupported ioctls
  [media] uvcvideo: Set device_caps in VIDIOC_QUERYCAP
  [media] uvcvideo: Don't fail when an unsupported format is requested
  [media] uvcvideo: Return -EACCES when trying to access a read/write-only control
  [media] uvcvideo: Set error_idx properly for extended controls API failures
  [media] rtl28xxu: add NOXON DAB/DAB+ USB dongle rev 2
  [media] fc2580: write some registers conditionally
  ...
2012-12-13 19:22:22 -08:00
Kees Cook
4926f65224 ARM: add finit_module syscall to ARM
Add finit_module syscall to the ARM syscall list.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-12-14 13:05:25 +10:30
Linus Torvalds
896ea17d3d Features:
- Add necessary infrastructure to make balloon driver work under ARM.
  - Add /dev/xen/privcmd interfaces to work with ARM and PVH.
  - Improve Xen PCIBack wild-card parsing.
  - Add Xen ACPI PAD (Processor Aggregator) support - so can offline/online
    sockets depending on the power consumption.
  - PVHVM + kexec = use an E820_RESV region for the shared region so we don't
    overwrite said region during kexec reboot.
  - Cleanups, compile fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQyJaAAAoJEFjIrFwIi8fJ9DoIALAjj3qaGDimykc/RPSu2MLL
 Tfchb1su0WxSu6fP17jBadq39Qna85UzZATMCyN47k8wB3KoSEW13rqwe7JSsdT/
 SEfZDrlbhNK+JAWJETx+6gq7J7dMwi/tFt4CbwPv/zAHb7C7JyzEgKctbi4Q1e89
 FFMXZru2IWDbaqlcJQjJcE/InhWy5vKW3bY5nR/Bz0RBf9lk/WHbcJwLXirsDcKk
 uMVmPy4yiApX6ZCPbYP5BZvsIFkmLKQEfpmwdzbLGDoL7N1onqq/lgYNgZqPJUkE
 XL1GVBbRGpy+NQr++vUS1NiRyR81EChRO3IrDZwzvNEPqKa9GoF5U1CdRh71R5I=
 =uZQZ
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen updates from Konrad Rzeszutek Wilk:
 - Add necessary infrastructure to make balloon driver work under ARM.
 - Add /dev/xen/privcmd interfaces to work with ARM and PVH.
 - Improve Xen PCIBack wild-card parsing.
 - Add Xen ACPI PAD (Processor Aggregator) support - so can offline/
   online sockets depending on the power consumption.
 - PVHVM + kexec = use an E820_RESV region for the shared region so we
   don't overwrite said region during kexec reboot.
 - Cleanups, compile fixes.

Fix up some trivial conflicts due to the balloon driver now working on
ARM, and there were changes next to the previous work-arounds that are
now gone.

* tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/PVonHVM: fix compile warning in init_hvm_pv_info
  xen: arm: implement remap interfaces needed for privcmd mappings.
  xen: correctly use xen_pfn_t in remap_domain_mfn_range.
  xen: arm: enable balloon driver
  xen: balloon: allow PVMMU interfaces to be compiled out
  xen: privcmd: support autotranslated physmap guests.
  xen: add pages parameter to xen_remap_domain_mfn_range
  xen/acpi: Move the xen_running_on_version_or_later function.
  xen/xenbus: Remove duplicate inclusion of asm/xen/hypervisor.h
  xen/acpi: Fix compile error by missing decleration for xen_domain.
  xen/acpi: revert pad config check in xen_check_mwait
  xen/acpi: ACPI PAD driver
  xen-pciback: reject out of range inputs
  xen-pciback: simplify and tighten parsing of device IDs
  xen PVonHVM: use E820_Reserved area for shared_info
2012-12-13 14:29:16 -08:00
Linus Torvalds
a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Linus Torvalds
046e7d685b Sound updates for 3.8-rc1
This update contains a fairly wide range of changes all over in sound
 subdirectory, mainly because of UAPI header moves by David and __dev*
 annotation removals by Bill.  Other highlights are:
 
 - Introduced the support for wallclock timestamps in ALSA PCM core
 
 - Add the poll loop implementation for HD-audio jack detection
 
 - Yet more VGA-switcheroo fixes for HD-audio
 
 - New VIA HD-audio codec support
 
 - More fixes on resource management in USB audio and MIDI drivers
 
 - More quirks for USB-audio ASUS Xonar U3, Reloop Play,  Focusrite,
   Roland VG-99, etc
 
 - Add support for FastTrack C400 usb-audio
 
 - Clean ups in many drivers regarding firmware loading
 
 - Add PSC724 Ultiimate Edge support to ice1712
 
 - A few hdspm driver updates
 
 - New Stanton SCS.1d/1m FireWire driver
 
 - Standardisation of the logging in ASoC codes
 
 - DT and dmaengine support for ASoC Atmel
 
 - Support for Wolfson ADSP cores
 
 - New drivers for Freescale/iVeia P1022 and Maxim MAX98090
 
 - Lots of other ASoC driver fixes and developments
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyYh9AAoJEGwxgFQ9KSmk95UP+wcVXRynWulCVwEnVjjWv/UM
 2fIsD0RkWO4WoqEVCNCHzW27pvFC36uqLx5vtas4CoJ2CX8ufQsPqWTx6K3MY/DQ
 /VJT8CI2EKPQY1Q0PySVo2nBqwcUXWWoZE47t1ZowR6cxtmgrS8lLxYJvkbfEOHF
 PS8WItACqH5F5VPxGFkhPwR2OTLfaYt7ilKx82vgxSzdMAel8q/I9uS/MUv8KV+1
 1s5yBvlW5eyDXKpQbP/KiMJLJ/zk1MRAKK2HftAk8pNt+Xy160NvXhbILDWKC4uT
 QBRPqyIe8BmL3VlXpw3mn7nbeU7rSfc/Rbrnm2+Yb54/Wtj4PnV6Z6bg7HO610im
 e/tBNHoaL7qn1iNYSC3heW11rToksd03/LK0GREvkX3Bl21T+Naaun/DY/PGIfMQ
 nOXy7uVo6sVdZnN2MTWof9qeMYBSlrwQVsMde6kbYadNcXnuqUqCOx41kiAdE8t5
 jfZy5QR+uDjdJgDv8/CuiCYxSjjTUfO1tdSV/VjsTK17Gfw3DWTJpeznVnoIALbZ
 81HXYxb+uGZ8xDr0WXGkydlnPvB6bnWu2vvfrLBkioA/p60EDNCtgKo1y3NzQGh8
 P2qILNhXIRrS2EoAScQOb6F1RPsvbDN9PbihnkShX3r7DXyeynr9jgPy3L2vf0bR
 xyu0jtQiqYb34ss7qqdz
 =IIsz
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This update contains a fairly wide range of changes all over in sound
  subdirectory, mainly because of UAPI header moves by David and __dev*
  annotation removals by Bill.  Other highlights are:

   - Introduced the support for wallclock timestamps in ALSA PCM core

   - Add the poll loop implementation for HD-audio jack detection

   - Yet more VGA-switcheroo fixes for HD-audio

   - New VIA HD-audio codec support

   - More fixes on resource management in USB audio and MIDI drivers

   - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite,
     Roland VG-99, etc

   - Add support for FastTrack C400 usb-audio

   - Clean ups in many drivers regarding firmware loading

   - Add PSC724 Ultiimate Edge support to ice1712

   - A few hdspm driver updates

   - New Stanton SCS.1d/1m FireWire driver

   - Standardisation of the logging in ASoC codes

   - DT and dmaengine support for ASoC Atmel

   - Support for Wolfson ADSP cores

   - New drivers for Freescale/iVeia P1022 and Maxim MAX98090

   - Lots of other ASoC driver fixes and developments"

Fix up trivial conflicts.  And go out on a limb and assume the dts file
'status' field of one of the conflicting things was supposed to be
"disabled", not "disable" like in pretty much all other cases.

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
  ALSA: hda - Move runtime PM check to runtime_idle callback
  ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522
  ALSA: hda - Avoid doubly suspend after vga switcheroo
  ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3
  ALSA: hda - Check validity of CORB/RIRB WP reads
  ALSA: hda - use usleep_range in link reset and change timeout check
  ALSA: HDA: VIA: Add support for codec VT1808.
  ALSA: HDA: VIA Add support for codec VT1705CF.
  ASoC: codecs: remove __dev* attributes
  ASoC: utils: remove __dev* attributes
  ASoC: ux500: remove __dev* attributes
  ASoC: txx9: remove __dev* attributes
  ASoC: tegra: remove __dev* attributes
  ASoC: spear: remove __dev* attributes
  ASoC: sh: remove __dev* attributes
  ASoC: s6000: remove __dev* attributes
  ASoC: OMAP: remove __dev* attributes
  ASoC: nuc900: remove __dev* attributes
  ASoC: mxs: remove __dev* attributes
  ASoC: kirkwood: remove __dev* attributes
  ...
2012-12-13 11:51:23 -08:00
Linus Torvalds
fe504c5c74 ARM: arm-soc board updates, take 2
This branch contains board updates for shmobile that had dependencies
 on earlier branches past the first driver branch, and thus are merged
 separately.
 
 Most of these are to enable audio and USB on shmobile. They contain a
 dependent ASoC branch that has been coordinated with Mark Brown.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySyyAAoJEIwa5zzehBx3PmkP/3hvmOJz/WVvsfsU2eomAiD/
 QA8NRWCLV4rLdJfe5FUztP0S3UtrA34pdjehwW1drPtX0J4c+o2aap7UKInNPzih
 kUj9W+D7tLyzITzHReD5kvP5HbyI+VnNN07N+okYNfpYw+dc9/sYQuQ11SdrgRHA
 IUZr0G7uF0RaZQ3tb+WjAgOr09AwDf7lxQenS+TN9wND14jGq91XINfgKuVkD9fF
 WhvUj/l/2O+R9t3HkklJQvdxIEbxHd0eaDc4mNJpnTjN3+4yTsaWsFkgfNkGY113
 +e5RPx5IkRH6d+IBzYMSGjZtRi4JOQKDT9yce4tLmQtjL03EF6yHtwV1PiYx8FPI
 QpY0i9kEGrTA6l7DSBK/4/pUSZHBAeMqaM+/9/9v26JZSGNp8rJzJ2wLaGkADv/v
 MUPL0iu86pRpOOur6ArHwu3uwOf7UCalXWTHB/3fFcpspR1x+FtA7qMTvKh/wQSp
 0DhOVD5MbEq/MByqp0VKLLzzbXnPgkWeFNKsRXdMJOVfPpUygC1QIJcT2zC38Tc0
 8yJM0q/omAzUVO4LytcQQwiqCVLce6BRJa+cbv8olET4kZ4bG3sVsrbXyTk8H/N5
 VO2lu9/cXexHJCg5HNOmmF7SrG56iuLXtNwRriy6j1DSd1A12p8fvMJt28562KLw
 voCOaNlGm5uYcbLn0M4b
 =1a/W
 -----END PGP SIGNATURE-----

Merge tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates, take 2 from Olof Johansson:
 "This branch contains board updates for shmobile that had dependencies
  on earlier branches past the first driver branch, and thus are merged
  separately.

  Most of these are to enable audio and USB on shmobile.  They contain a
  dependent ASoC branch that has been coordinated with Mark Brown."

* tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: shmobile: mackerel: Add FLCTL IRQ resource
  ARM: shmobile: use FSI driver's audio clock on ap4evb
  ARM: shmobile: use FSI driver's audio clock on mackerel
  ARM: shmobile: use FSI driver's audio clock on armadillo800eva
  ARM: shmobile: mackerel: enable DMAEngine on USB Host
  ARM: shmobile: marzen: add USB OHCI driver support
  ARM: shmobile: marzen: add USB EHCI driver support
  ARM: shmobile: marzen: add USB phy support
  ASoC: fsi: add master clock control functions
  ASoC: fsi: care fsi_hw_start/stop() return value
  ASoC: fsi: fsi_set_master_clk() was called from fsi_hw_xxx() only
  ASoC: fsi: use devm_request_irq()
  ASoC: fsi: fixup channels_min/max
2012-12-13 11:00:00 -08:00
Linus Torvalds
698d601224 ARM: arm-soc: driver specific changes
A collection of mostly SoC-specific driver updates:
 - a handful of pincontrol and setup changes
 - new drivers for hwmon and reset controller for vexpress
 - timing support updates for OMAP (gpmc and other interfaces)
 - + a collection of smaller cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySxPAAoJEIwa5zzehBx3NbgP/iI1EFKI8fK6tp7F1EeTwDYK
 tKeKFmx+Lio2z5OF0CS0qK0HODtcS2ifJ5Zz3C9VyiRBNDOuYAvDT+5bIAKsKIo3
 p0mZyYvgdbcxH30EhYY8klaUVwRyc1noxdO8vENdzoAik4EwUv5zXEKAlcBfScrA
 usCW0dhGJYKH73kgLKQvsyE9d/aV0hbcniSYoVHH1G4e6U5vG45y8pqeSrTQxfCP
 nG177/AheoCHoyoh/td0lmkAJsmXM7NpvdJTaAwKgOmEXvOCUwAcuOgOCEuc7sd/
 FG3jGLntcB9z0AtbO/YOl3+110o71KBF7gYrDDEjLD6U7zz7yhcmhGVh+FEnVa0I
 ppgReNN3jZOs7HVlDTvTXLdh5cjZU5JIpLOmHWdERAwkxakDCd07KzPo5g44XTyO
 CzZuqVFU2JNliIujoJHL2Trnj7Q54fWcgHWkWJdWBhJMsxC42xWgaukCaLDHNuBX
 Po5cqOnEnAYA0rgvQxfdfPWzJd/NN/kU/ewun0pwni3+PlzhfxFzTRcLcj4BT4By
 1S2foQUt0CVkswgFdkRlbGolSsXIlOQmKvsd8kvzldDUzn+0cxgwYHzg4T29hlmY
 zv0+sfgSxub68zfodDtdyjBWDCgrSHrf3TGjGD/4/X6Bm9Ss3hRj4LHIM7Z2BX7F
 PJgvGjAZIfuZThLkShLa
 =CwMf
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Olof Johansson:
 "A collection of mostly SoC-specific driver updates:
   - a handful of pincontrol and setup changes
   - new drivers for hwmon and reset controller for vexpress
   - timing support updates for OMAP (gpmc and other interfaces)
   - plus a collection of smaller cleanups"

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: ux500: fix pin warning
  ARM: OMAP2+: tusb6010: generic timing calculation
  ARM: OMAP2+: smc91x: generic timing calculation
  ARM: OMAP2+: onenand: generic timing calculation
  ARM: OMAP2+: gpmc: generic timing calculation
  ARM: OMAP2+: gpmc: handle additional timings
  ARM: OMAP2+: nand: remove redundant rounding
  gpio: samsung: use pr_* instead of printk
  ARM: ux500: fixup magnetometer pins
  ARM: ux500: add STM pin configuration
  ARM: ux500: 8500: add pinctrl support for uart1 and uart2
  ARM: ux500: cosmetic fixups for uart0
  gpio: samsung: Fix input mode setting function for GPIO int
  ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip
  ARM: ux500: 8500: define SDI sleep states
  ARM: vexpress: Reset driver
  ARM: ux500: 8500: update SKE keypad pinctrl table
  hwmon: Versatile Express hwmon driver
  ARM: ux500: delete duplicate macro
  ARM: ux500: 8500: add IDLE pin configuration for SPI
  ...
2012-12-13 10:59:11 -08:00
Linus Torvalds
a11da7df65 ARM: arm-soc: power management and clock changes
This branch contains a largeish set of updates of power management and
 clock setup. The bulk of it is for OMAP/AM33xx platforms, but also a
 few around hotplug/suspend/resume on Exynos.
 
 It includes a split-up of some of the OMAP clock data into separate
 files which adds to the diffstat, but gross delta is fairly reasonable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySrdAAoJEIwa5zzehBx3XBMQAJCgrE/I1vbuiENiVMLpQkN7
 0Y5t89SwoALnme5jsM8vW/H0o6b163FfH+249UNs6dyk6MdCqqSv8cQVvSfCKRKn
 m4JTXS6njSnYgU025klNU9W3FyMuFcgH8b63+c5+sCcqfvdkxrjpNoKqAYNxQlgJ
 6DHgHCKZP3JB1e2EFqViw0GJgZIjTNxlWvx8XLcAShSapQ+Ovq/iAcKo41o7ZadB
 4zV//VkBMv0TLNTs6SoR0EO8qM+2nIUKE8fgPrRxvvb98tuasKPvlSq9VUeIjnYk
 kWjNTQYbD1IkrAMPYrwcpLU3xkEr14wrKDBtPK6GdCDcXzdyKq3fzROOXNsqrLmn
 Y8PkY+J39B59F0DKjyrCjasZyi0tQQV6ps5Xm2X2CB003GWEbo1yu+BodShYEyaL
 7OvkLiVpOtq+LOYcsScHtOGdO9le2O3yZevNRvlrCDCvJUYbXNjaM9ZrWcQuTlJc
 oseYNSRPaIP5PMv2c+Xup9qh/dyAjj8g6gSi9BlDvwVOu/+Cf3laaCAXaFph22jT
 /m8fW2paiP5UJ0gSt1MLAGFxKi0YI/Qxck8G11LJxUwMZd3SIfOPUAY27tnNC4yL
 GRynOi3BFRMUAe/Leu2qgwEyoME5nHn+OmAKb36WTYH/HL+PGzHq84e+Wfdan8ha
 YcSKc1A52LSoYTi4XTUX
 =h2Qo
 -----END PGP SIGNATURE-----

Merge tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC power management and clock changes from Olof Johansson:
 "This branch contains a largeish set of updates of power management and
  clock setup.  The bulk of it is for OMAP/AM33xx platforms, but also a
  few around hotplug/suspend/resume on Exynos.

  It includes a split-up of some of the OMAP clock data into separate
  files which adds to the diffstat, but gross delta is fairly reasonable."

* tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h
  ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support
  watchdog: OMAP: fixup for ARM multiplatform support
  ARM: EXYNOS: Add flush_cache_all in suspend finisher
  ARM: EXYNOS: Remove scu_enable from cpuidle
  ARM: EXYNOS: Fix soft reboot hang after suspend/resume
  ARM: EXYNOS: Add support for rtc wakeup
  ARM: EXYNOS: fix the hotplug for Cortex-A15
  ARM: OMAP2+: omap_device: Correct resource handling for DT boot
  ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type
  ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count
  ARM: OMAP2+: PRM: initialize some PRM functions early
  ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n
  ARM: OMAP4: USB: power down MUSB PHY during boot
  ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP2xxx: clock: drop obsolete clock data
  ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections
  ARM: AM33xx: clock: drop obsolete clock data
  ARM: OMAP3xxx: clk: drop obsolete clock data
  ...
2012-12-13 10:58:20 -08:00
Linus Torvalds
b8edf848e9 ARM: arm-soc: multiplatform conversion patches
Here are more patches in the progression towards multiplatform, sparse
 irq conversions in particular.
 
 Tegra has a handful of cleanups and general groundwork, but is
 not quite there yet on full enablement.
 
 Platforms that are enabled through this branch are VT8500 and Zynq. note
 that i.MX was converted in one of the earlier cleanup branches as
 well (before we started a separate topic for multiplatform). And both
 new platforms for this merge window, sunxi and bcm, were merged with
 multiplatform support enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySb/AAoJEIwa5zzehBx3Wo4P/0GrpUhB/qwuhgy43MA2I1Dv
 tnyuFvsfW9uRExcw2IwT39GFls98QUM9TwQxPqOTHVf+u0LkYMZ9aDeWJOdj3RvG
 H70Ypj4gZDrzZAFr2TUf8NnYGHd6G2EcMn3261Hjfd7YrswCjsMPvgRns7VOyHCa
 deif3KcLu3+HzxvuzqlVlTuSAagCQbfqqnTQduMRdJPHT3X3sXwl7ABW+qfOoeYC
 rjqIbjdh5dB1d/f7igtgBbXjSTnVz/Mr1+wk4rp9Xr1Wv0IXvIaSKjK2Df8ZuNAk
 aQ6mMy/oDVxlDSrYv0F7lB40/rsZcPqz8+fgYJ2FnvCpIM7z7NeTWD2kQJ2UaQ/s
 VunShloRxF8It6104EVWZDfEA9NvVBcCALSze0NukqiHZRZYGUzxRNQDrncaksC9
 Lm+Z16cUWogsZq7VDCgXYQJeakPQfBDnsx7siMvAbOgvtpSClxuwhdC/czJiix7h
 BcpA+l5xSviUhHvzHhDt9iJxHjbUmo1xLDvaZSgj2OjAj257JcwaNBCk5BjZTCwe
 xZmQu1FjwaGtjLiG6QY0WJRsq1hiFRIb/MaWar/WpfqADFqARoambGFUjOl+P4Mu
 DIM5Z0AS04H+pLuP1QOz/yXxOPEP6Ri36to6XrgzfL/XGet5LW2P59xXxhcWC/OL
 /3IAcQrsAqh4aGMOstW1
 =UJlh
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform conversion patches from Olof Johansson:
 "Here are more patches in the progression towards multiplatform, sparse
  irq conversions in particular.

  Tegra has a handful of cleanups and general groundwork, but is not
  quite there yet on full enablement.

  Platforms that are enabled through this branch are VT8500 and Zynq.
  Note that i.MX was converted in one of the earlier cleanup branches as
  well (before we started a separate topic for multiplatform).  And both
  new platforms for this merge window, sunxi and bcm, were merged with
  multiplatform support enabled."

Fix up conflicts mostly as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: tegra: move debug-macro.S to include/debug
  ARM: tegra: don't include iomap.h from debug-macro.S
  ARM: tegra: decouple uncompress.h and debug-macro.S
  ARM: tegra: simplify DEBUG_LL UART selection options
  ARM: tegra: select SPARSE_IRQ
  ARM: tegra: enhance timer.c to get IO address from device tree
  ARM: tegra: enhance timer.c to get IRQ info from device tree
  ARM: timer: fix checkpatch warnings
  ARM: tegra: add TWD to device tree
  ARM: tegra: define DT bindings for and instantiate RTC
  ARM: tegra: define DT bindings for and instantiate timer
  clocksource/mtu-nomadik: use apb_pclk
  clk: ux500: Register mtu apb_pclocks
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ...
2012-12-13 10:57:16 -08:00
Linus Torvalds
db5b0ae007 ARM: arm-soc: device tree conversions and enablement
Continued device tree conversion and enablement across a number of
 platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
 smaller series as well.
 
 ux500 has seen continued conversion for platforms. Several platforms have
 seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra
 is adding data for new devices/drivers, and Exynos has a bunch of new
 bindings and devices added as well.
 
 So, pretty much the same progression in the right direction as the last
 few releases.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySW7AAoJEIwa5zzehBx39xcP/jzEQOTOJdK4zJd1OjgrQoX/
 WnhbGJT941RNjRjvDG6HmZzhpsRoE4q/zkjFEKoKELdikRW0hYoR+zPCGuB7XtN5
 aF1ZQrTx4gHf4KE7doIB8slaWeOq8aG2TLFhylyy+cuaIpRK0NG0pAR0ZqWaoga9
 tZFciqzplLeo50vZ+y+lVVsR40j/w29EjwPXhCV30//gGOYLyp/VDu5PRtrBdgh8
 EgpcT2EWJwMCN/Upcao/q2JbQktPHPpSwnpaUAALYB20uD7k5jo7wtYE/+L9nn6B
 bxcCDTMVmqzNTF+y0P16hDcs5jMLVjpI0xBiyZ1G6gShpggsSZCHY5ynjAtQ19se
 r+2WrNfOR23k6arJuOUAQSEnLdx0T5SlW6CJeFEofKv4uoebxAbKUiNO4ShWskhd
 nNptX1+L3hj3zpjGcEHmL6bd+nGtyMeoG9Yekcv1oZxdVcpKhFxh0s5PEJBEeXcN
 M7aAWlWJkplV22Olqhpc/3INCweq6E+zBrBxZaUBW/JCzGrqBUGC0BULDPAkmC4J
 CKL6IqIB73jGQ4OY14IaMU20GJrIGxZ7wzXOp4aw3OUpRlxsgurfyFQeIjUvVoZL
 PJ8DRoAVwreVHvKfgZZVKpSAY7dwcWbxpWsYlrH3zWIC5vRJ0UFwsD0TpLJWd6Vi
 XA8gQcJRWKGS8E5mRY39
 =Rk9v
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...
2012-12-13 10:39:26 -08:00
Tomi Valkeinen
e7f5c9a16e Merge tag 'omapdss-for-3.8' of git://gitorious.org/linux-omap-dss2/linux into for-linus
OMAPDSS changes for 3.8, including:
- use dynanic debug prints
- OMAP platform dependency removals
- Creation of compat-layer, helping us to improve omapdrm
- Misc cleanups, aiming to make omadss more in line with the upcoming common
  display framework

* tag 'omapdss-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (140 commits)
  OMAPDSS: fix TV-out issue with DSI PLL
  Revert "OMAPFB: simplify locking"
  OMAPFB: remove silly loop in fb2display()
  OMAPFB: fix error handling in omapfb_find_best_mode()
  OMAPFB: use devm_kzalloc to allocate omapfb2_device
  OMAPDSS: DISPC: remove dispc fck uses
  OMAPDSS: DISPC: get dss clock rate from dss driver
  OMAPDSS: use omapdss_compat_init() in other drivers
  OMAPDSS: export dispc functions
  OMAPDSS: export dss_feat functions
  OMAPDSS: export dss_mgr_ops functions
  OMAPDSS: separate compat files in the Makefile
  OMAPDSS: move display sysfs init to compat layer
  OMAPDSS: DPI: use dispc's check_timings
  OMAPDSS: DISPC: add dispc_ovl_check()
  OMAPDSS: move irq handling to dispc-compat
  OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
  OMAPDSS: move blocking mgr enable/disable to compat layer
  OMAPDSS: manage framedone irq with mgr ops
  OMAPDSS: add manager ops
  ...
2012-12-13 14:30:56 +02:00
Linus Torvalds
6be35c700f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:

1) Allow to dump, monitor, and change the bridge multicast database
   using netlink.  From Cong Wang.

2) RFC 5961 TCP blind data injection attack mitigation, from Eric
   Dumazet.

3) Networking user namespace support from Eric W. Biederman.

4) tuntap/virtio-net multiqueue support by Jason Wang.

5) Support for checksum offload of encapsulated packets (basically,
   tunneled traffic can still be checksummed by HW).  From Joseph
   Gasparakis.

6) Allow BPF filter access to VLAN tags, from Eric Dumazet and
   Daniel Borkmann.

7) Bridge port parameters over netlink and BPDU blocking support
   from Stephen Hemminger.

8) Improve data access patterns during inet socket demux by rearranging
   socket layout, from Eric Dumazet.

9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and
   Jon Maloy.

10) Update TCP socket hash sizing to be more in line with current day
    realities.  The existing heurstics were choosen a decade ago.
    From Eric Dumazet.

11) Fix races, queue bloat, and excessive wakeups in ATM and
    associated drivers, from Krzysztof Mazur and David Woodhouse.

12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions
    in VXLAN driver, from David Stevens.

13) Add "oops_only" mode to netconsole, from Amerigo Wang.

14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also
    allow DCB netlink to work on namespaces other than the initial
    namespace.  From John Fastabend.

15) Support PTP in the Tigon3 driver, from Matt Carlson.

16) tun/vhost zero copy fixes and improvements, plus turn it on
    by default, from Michael S. Tsirkin.

17) Support per-association statistics in SCTP, from Michele
    Baldessari.

And many, many, driver updates, cleanups, and improvements.  Too
numerous to mention individually.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  net/mlx4_en: Add support for destination MAC in steering rules
  net/mlx4_en: Use generic etherdevice.h functions.
  net: ethtool: Add destination MAC address to flow steering API
  bridge: add support of adding and deleting mdb entries
  bridge: notify mdb changes via netlink
  ndisc: Unexport ndisc_{build,send}_skb().
  uapi: add missing netconf.h to export list
  pkt_sched: avoid requeues if possible
  solos-pci: fix double-free of TX skb in DMA mode
  bnx2: Fix accidental reversions.
  bna: Driver Version Updated to 3.1.2.1
  bna: Firmware update
  bna: Add RX State
  bna: Rx Page Based Allocation
  bna: TX Intr Coalescing Fix
  bna: Tx and Rx Optimizations
  bna: Code Cleanup and Enhancements
  ath9k: check pdata variable before dereferencing it
  ath5k: RX timestamp is reported at end of frame
  ath9k_htc: RX timestamp is reported at end of frame
  ...
2012-12-12 18:07:07 -08:00
Olof Johansson
9c7466b217 ARM: arm-soc: Merge branch 'next/pm2' into next/pm
Another smaller branch merged into next/pm before pull request.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-12 16:10:45 -08:00
Olof Johansson
4a76411ea3 ARM: arm-soc: Merge branch 'next/clk' into next/pm
Merge together a couple of the smaller pm/clock branches into one.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-12 16:10:00 -08:00
Linus Torvalds
9977d9b379 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull big execve/kernel_thread/fork unification series from Al Viro:
 "All architectures are converted to new model.  Quite a bit of that
  stuff is actually shared with architecture trees; in such cases it's
  literally shared branch pulled by both, not a cherry-pick.

  A lot of ugliness and black magic is gone (-3KLoC total in this one):

   - kernel_thread()/kernel_execve()/sys_execve() redesign.

     We don't do syscalls from kernel anymore for either kernel_thread()
     or kernel_execve():

     kernel_thread() is essentially clone(2) with callback run before we
     return to userland, the callbacks either never return or do
     successful do_execve() before returning.

     kernel_execve() is a wrapper for do_execve() - it doesn't need to
     do transition to user mode anymore.

     As a result kernel_thread() and kernel_execve() are
     arch-independent now - they live in kernel/fork.c and fs/exec.c
     resp.  sys_execve() is also in fs/exec.c and it's completely
     architecture-independent.

   - daemonize() is gone, along with its parts in fs/*.c

   - struct pt_regs * is no longer passed to do_fork/copy_process/
     copy_thread/do_execve/search_binary_handler/->load_binary/do_coredump.

   - sys_fork()/sys_vfork()/sys_clone() unified; some architectures
     still need wrappers (ones with callee-saved registers not saved in
     pt_regs on syscall entry), but the main part of those suckers is in
     kernel/fork.c now."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (113 commits)
  do_coredump(): get rid of pt_regs argument
  print_fatal_signal(): get rid of pt_regs argument
  ptrace_signal(): get rid of unused arguments
  get rid of ptrace_signal_deliver() arguments
  new helper: signal_pt_regs()
  unify default ptrace_signal_deliver
  flagday: kill pt_regs argument of do_fork()
  death to idle_regs()
  don't pass regs to copy_process()
  flagday: don't pass regs to copy_thread()
  bfin: switch to generic vfork, get rid of pointless wrappers
  xtensa: switch to generic clone()
  openrisc: switch to use of generic fork and clone
  unicore32: switch to generic clone(2)
  score: switch to generic fork/vfork/clone
  c6x: sanitize copy_thread(), get rid of clone(2) wrapper, switch to generic clone()
  take sys_fork/sys_vfork/sys_clone prototypes to linux/syscalls.h
  mn10300: switch to generic fork/vfork/clone
  h8300: switch to generic fork/vfork/clone
  tile: switch to generic clone()
  ...

Conflicts:
	arch/microblaze/include/asm/Kbuild
2012-12-12 12:22:13 -08:00
Linus Torvalds
cf4af01221 ARM: arm-soc: Board updates for 3.8
This branch contains a set of various board updates for ARM platforms.
 
 A few shmobile platforms that are stale have been removed, some
 defconfig updates for various boards selecting new features such as
 pinctrl subsystem support, and various updates enabling peripherals, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyLD0AAoJEIwa5zzehBx3nNYQAI8a1cS/0U1GGXhmYJs4ZJjM
 9yeFKOQmv7kQMmqC9b9UhoCtqwsxR4s2qjUps3464q8pZmEXysc+Z5kH/av9ULJw
 zp62iTxa/qBfnF+UKCt4PAxoL9KvN36XgPH6OADiQ9rvsJ20zF8Agq22CiSF+8AR
 CfX60joQnd/BEBORP86Zm5AlAeXiah/MrUBQuiCgNq+Ew9bQ0/I15UKZzlLKeQST
 eYviHjlGPFcXWaxuIgNUQ5KzFfKtSERHHHsiIy9DEi0zq7fLhiwY+eIYUWN34aDp
 K+bV7wmh6ufa3/Z024Du5FkSI4fIOLz6b5hlJxOzgvQ3AZJ7JK8IYSXCibgUjWxO
 gFxpVj/MYGf+FlWVQpaf/niMuhYqRAbWy1rsGcmyn8+rb8cHxDHs/3Z4dQTmgxMf
 6lEdR4npULAP22MSB71yQtPjn9XW1338a0/a5GPdvihZjwpMH2ZXRxAkGuGpamFT
 /oXwADuh5a+1uMctXQqb/1FnJcmH/mbEp40bU90AwSqJ6Y8FJts4P5B3H9RQ5rO7
 uz/KVB4ilUHGONtrTiNohYbrNLj3t2kNUt8QrQINMWBHSDFHLUbK48QcoqK4uJPB
 9RFu9mtovUvfJXVivOoO/BRVnKomUba7fhET1VP4UXiCc7WNtmj36kiXSHbfu3NV
 /ox1FAH3UU8jB91OeEqV
 =sgYz
 -----END PGP SIGNATURE-----

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
 "This branch contains a set of various board updates for ARM platforms.

  A few shmobile platforms that are stale have been removed, some
  defconfig updates for various boards selecting new features such as
  pinctrl subsystem support, and various updates enabling peripherals,
  etc."

Fix up conflicts mostly as per Olof.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs
  ARM: S3C64XX: Add registration of WM2200 Bells device on Cragganmore
  ARM: kirkwood: Add Plat'Home OpenBlocks A6 support
  ARM: Dove: update defconfig
  ARM: Kirkwood: update defconfig for new boards
  arm: orion5x: add DT related options in defconfig
  arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree
  arm: orion5x: basic Device Tree support
  arm: orion5x: mechanical defconfig update
  ARM: kirkwood: Add support for the MPL CEC4
  arm: kirkwood: add support for ZyXEL NSA310
  ARM: Kirkwood: new board USI Topkick
  ARM: kirkwood: use gpio-fan DT binding on lsxl
  ARM: Kirkwood: add Netspace boards to defconfig
  ARM: kirkwood: DT board setup for Network Space Mini v2
  ARM: kirkwood: DT board setup for Network Space Lite v2
  ARM: kirkwood: DT board setup for Network Space v2 and parents
  leds: leds-ns2: add device tree binding
  ARM: Kirkwood: Enable the second I2C bus
  ARM: mmp: select pinctrl driver
  ...
2012-12-12 12:14:06 -08:00
Linus Torvalds
d027db132b ARM: arm-soc: SoC updates for 3.8
This contains the bulk of new SoC development for this merge window.
 
 Two new platforms have been added, the sunxi platforms (Allwinner A1x
 SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
 series of ARMv7 platforms from them, where the hope is that we can
 keep the platform code generic enough to have them all share one mach
 directory. The new Broadcom platform is contributed by Christian Daudt.
 
 Highbank has grown support for Calxeda's next generation of hardware,
 ECX-2000.
 
 clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also
 taken on maintainership of the platform.
 
 Beyond this there has been a bunch of work from a number of people on
 converting more platforms to IRQ domains, pinctrl conversion, cleanup
 and general feature enablement across most of the active platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyLCjAAoJEIwa5zzehBx3AdQP/R+L3+EQMjiEWt/p7g/ql5Em
 0SnP92CcGzrjgLTg9z1FeOazfOsGnkZAYUlDRkqfKobH3VqkhYFFtt1/0x0KMahm
 xcowHgMBOyimFdWT9vLK3J8U6DLui5XrEG9LGH2VL+lqmfjIyP/OOF3mVc0/+pV9
 WTLAsYswdBRSeiNuF43kqlfrOwF6xsPLgiNMlc82w6BzHqoHu6dOif5M9MqWaApS
 V74DPmwLD371Tyit6aHqt3JOqpgiPSHlmxkzomK+5idcW3Pa7HnzzFYmx85dk/eN
 J2siqIkoOu7tEfjIbNZTL2MYoX4tUUKv4qZZ3IOl3YSWaV3P5ilMApF01XVrkk8E
 DWOMhzte9hC7L90W+/kCPLF1VyeAhCem2KQWUitO71fKur3r+3ZaUokNVvWzkJIL
 7aduxAJOV2hfLgEqbjbjF3o4S8p63OV3kzivFJM1And15zDJo4+qqOh67+bPo4jj
 +R4du+SqzXriw4i3tDLGVpdjDffk4D41tbLzgkWAtvGyoP45yeYfHAzAh0pDFPRv
 ASfZVmZ5PhwAUAkIMnpC2sjgmxMYff3SYqmDgnsqXES7rbDH/hG+teymtHFTyUQp
 m+f60DNotSMcMvkLdvruLSB4aeTiwbfOqPn/g+aXYUlPuNMq1fVWgN7EJKWkamK4
 nRwaJmLwx1/ojcVbpy2G
 =YMKB
 -----END PGP SIGNATURE-----

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC updates from Olof Johansson:
 "This contains the bulk of new SoC development for this merge window.

  Two new platforms have been added, the sunxi platforms (Allwinner A1x
  SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
  series of ARMv7 platforms from them, where the hope is that we can
  keep the platform code generic enough to have them all share one mach
  directory.  The new Broadcom platform is contributed by Christian
  Daudt.

  Highbank has grown support for Calxeda's next generation of hardware,
  ECX-2000.

  clps711x has seen a lot of cleanup from Alexander Shiyan, and he's
  also taken on maintainership of the platform.

  Beyond this there has been a bunch of work from a number of people on
  converting more platforms to IRQ domains, pinctrl conversion, cleanup
  and general feature enablement across most of the active platforms."

Fix up trivial conflicts as per Olof.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits)
  mfd: vexpress-sysreg: Remove LEDs code
  irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids
  clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids
  irq: versatile: delete dangling variable
  ARM: sunxi: add missing include for mdelay()
  ARM: EXYNOS: Avoid early use of of_machine_is_compatible()
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  ARM: sunxi: Add missing sun4i.dtsi file
  pinctrl: samsung: Do not initialise statics to 0
  ARM i.MX6: remove gate_mask from pllv3
  ARM i.MX6: Fix ethernet PLL clocks
  ARM i.MX6: rename PLLs according to datasheet
  ARM i.MX6: Add pwm support
  ARM i.MX51: Add pwm support
  ARM i.MX53: Add pwm support
  ARM: mx5: Replace clk_register_clkdev with clock DT lookup
  ...
2012-12-12 12:05:15 -08:00
Linus Torvalds
d01e4afdbb ARM: arm-soc: Cleanups on various subarchitectures
Cleanup patches for various ARM platforms and some of their associated
 drivers. There's also a branch in here that enables Freescale i.MX to be
 part of the multiplatform support -- the first "big" SoC that is moved
 over (more multiplatform work comes in a separate branch later during
 the merge window).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQx2p9AAoJEIwa5zzehBx3aPUQAIjV3VDf/ACkA4KUQu0BFg5U
 57OIkl6RCZvfKhYgq5+6OJ2AK6VkGh9PqTmXkDS7Nj3QMS/uWcb3U419aPJsd3Z/
 vNGpTl+J/YcAcFrKMqTyNv98TAiAOJlpm70CqmRbkhpMfoJb7//1JKqGTJPBO+tj
 8ZEwNGC0WbRNOSQTY/TTAhbZE1sqXwKy9mDLGmcwqKBY8H1TFHyPB6yWYFSxMHxS
 JAegbYhYO9FawOOLoi9ovT+2vUR9vDu0xxV4zUK9f5DqKcCb/wYuN0QkusjnEutm
 RfIt7iXHHzi35YPxtlrGgSz9EIYXKAafSzkgf3Ydpjci5DH/vbVexm/CT+V+SwOT
 SvucYJMALI/aOEFJWN/50L6B9zipSrWb51tK7WFXz/sUCrMQrXH3Mu99mjHZXSoL
 1cylsvs3DFQC7vHFLSjRpX6eJdfE+Hb0LZ878eXSbDVCOnU8odAQrofugqfmeVDk
 eN0+BWmchJgvljOiKVUQMC3PCquCaAAO1lm/HU7bWPlVigTuHSW0uisDyCYAtlt1
 dGxnbbhoFJvSH7CMOoMO7hIFnoNJEe6+uVUuwA/+iJouMXMJLoY6Da4L72h1Mp81
 o4Hr6Kxly/SMtURZ/6pCycx5ahb5TaahstYAoe7Qp1dMj5U2m6fUVfKkG7tUx1CW
 MIuvN3qJeW2qKWKmZRVM
 =zfPd
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups on various subarchitectures from Olof Johansson:
 "Cleanup patches for various ARM platforms and some of their associated
  drivers.  There's also a branch in here that enables Freescale i.MX to
  be part of the multiplatform support -- the first "big" SoC that is
  moved over (more multiplatform work comes in a separate branch later
  during the merge window)."

Conflicts fixed as per Olof, including a silent semantic one in
arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to
omap3xxx_restart(), and a new user of the old name was added).

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits)
  ARM: omap: fix typo on timer cleanup
  ARM: EXYNOS: Remove unused regs-mem.h file
  ARM: EXYNOS: Remove unused non-dt support for dwmci controller
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: SAMSUNG: use devm_ functions for ADC driver
  ARM: EXYNOS: no duplicate mask/unmask in eint0_15
  ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443
  ARM: EXYNOS: Remove i2c0 resource information and setting of device names
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes
  ARM: integrator: use BUG_ON where possible
  ARM: integrator: push down SC dependencies
  ARM: integrator: delete static UART1 mapping
  ARM: integrator: delete SC mapping on the CP
  ARM: integrator: remove static CP syscon mapping
  ARM: integrator: remove static AP syscon mapping
  ...
2012-12-12 11:51:39 -08:00
Linus Torvalds
8287361abc ARM: arm-soc: Header cleanups
This is a collection of header file cleanups, mostly for OMAP and AT91,
 that keeps moving the platforms in the direction of multiplatform by
 removing the need for mach-dependent header files used in drivers and
 other places.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQx2reAAoJEIwa5zzehBx3Z/oQAIHp8aXbUD0GvbBPQ2vIydZ8
 Qfdh2ypbyFB9GSLmPP6BhurEFUcwmW3MH2r9Kq68omPt4XxrFEt1SdEn3TgZlhTY
 YYzEv2DLbWfmKCDBFAEFullsfVkrpggyou5ty30YVp/u2lVLvChpkciE5/9HADy5
 uoh/W2KZcLE51tvnbRy/1DBaOtxEdCjJ9hTaef7FCB9ugOG+yMDYwIPRW/b4fNA6
 o/1NuZTWp0H4ePRG2oqLxYnjSiF63DVTJZjSJ+c5gW34bWgh8+/xzaLFA9U++/ig
 meGUD1Oe65+ctr+Wk2mV29eb02jauUe6qvkwt+iFIDDopgc2mn5BcW+ENpgpjhe3
 6l3ClRd94qh4cMWzqDa5PZCdetshiKqSH2IGpKS/dHNB1h5sBP7CCbvbalwzWd5n
 qjfkPC7kSFyU3XV+9SEAXE6HLKsiMQy9kRcKOMdTE5BA4FEAZk0wfiG9WcVCvS2D
 9tDC3X0aScyXx4Mkd4wIAZVhY68QuI17fPft9zZSj691YiUW5cR2yF1qbCka0yd5
 pHu/QSZg1+dUitMUvMPQmWJ15jnAtEYUtV/8zQFFVchgkxlrW+UtvW3zxghB6D+J
 ZwcjAMfQQz9fLoMQXlVovjQIhYsjw3SlV62ReBH7eyPs3+KfPIBn7Ks6mVQs3dS5
 AMUWORsB5u92XHl9EL9C
 =aggA
 -----END PGP SIGNATURE-----

Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC Header cleanups from Olof Johansson:
 "This is a collection of header file cleanups, mostly for OMAP and
  AT91, that keeps moving the platforms in the direction of
  multiplatform by removing the need for mach-dependent header files
  used in drivers and other places."

Fix up mostly trivial conflicts as per Olof.

* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
  ARM: OMAP2+: Move iommu/iovmm headers to platform_data
  ARM: OMAP2+: Make some definitions local
  ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
  ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
  ARM: OMAP2+: Move iopgtable header to drivers/iommu/
  ARM: OMAP: Merge iommu2.h into iommu.h
  atmel: move ATMEL_MAX_UART to platform_data/atmel.h
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ...
2012-12-12 11:45:16 -08:00
Linus Torvalds
2989950cea ARM: arm-soc: Non-critical bug fixes
Simple bug fixes that were not considered important enough for inclusion
 into 3.7, especially those that arrived late during the merge window.
 
 There's also a MAINTAINERS update for the Renesas platforms in here,
 marking Simon Horman as a maintainer and changing the git url to his tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQx2n/AAoJEIwa5zzehBx3ciUQAKIlI8FQ/ggsfP3xYzT7y9dm
 WCmfWb5OMq/kO+7vNImiKpqYUW63C+/LZlsLvXreo0YaOcodnIGr6zR822POCZ7d
 76sG8isrnHL9nNfBF3qRLsNfrFV+CrBKvm1go0v6cVVp6VfpHwAk5wbNL+ET/3Kb
 l3rjpFhxd5m2CMLY3ejPpwxsYXB8RJTTwz2ANYH37+aO4JwJFOmnEZoDFSSnbF5F
 veNF1PQvvmiFfi18yOIDJLzF1M1tw4g8Qr5Ypno2sBQaz3lm73cBtf5hqT7XjYzk
 oYgbNbR+XuJD35jtyYtV2DzUEPqZvFFTi1AL31senG+vT0HlLj+7ykQoaWs5maAb
 p9Vp3pe5kpCmQgRmeVF6Pqe5aTPhbfBnfIp+mBh5Bs9CUsXsSt+X8JYpicA3lZAM
 3OWq2PTkK/Cvv7RW91H2njgfoIeM5YzR3bb3EZ7JyYdDO9U+o6CMxhhNimFKq9Zk
 QqbFbLPhhBrhtcpCQTp0i17dvFJkHUY3CuktcgekEx1cTCdcaisjz/5Ax+3ZOG0C
 WxDMyAwQ4DP+USc9LAQkBqw3uVcoM0RqlmrXvxRtkrLEsD4msnmKoOe8zm3Q/CoD
 ZWASjBMbKaLzQ7rbrmV8CdjwdAwrxexyDITRd0yKgW4IeXALLBqyLb3cqt23C6Bf
 qIZtOgu1DKm1QoBM8Tgm
 =Lcpo
 -----END PGP SIGNATURE-----

Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC Non-critical bug fixes from Olof Johansson:
 "Simple bug fixes that were not considered important enough for
  inclusion into 3.7, especially those that arrived late during the
  merge window.

  There's also a MAINTAINERS update for the Renesas platforms in here,
  marking Simon Horman as a maintainer and changing the git url to his
  tree."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  Update ARM/SHMOBILE section of MAINTAINERS
  ARM: Fix Kconfig symbols typo for LEDS
  ARM: pxa: add dummy SA1100 rtc clock in pxa25x
  ARM: pxa: fix pxa25x gpio wakeup setting
  ARM: OMAP4: PM: fix errata handling when CONFIG_PM=n
  ARM: cns3xxx: drop unnecessary symbol selection
  ARM: vexpress: fix ll debug code when building multiplatform
  ARM: OMAP4: retrigger localtimers after re-enabling gic
  ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change.
  ARM: OMAP4: PM: add errata support
  ARM: davinci: fix return value check by using IS_ERR in tnetv107x_devices_init()
  ARM: davinci: uncompress.h: bail out if uart not initialized
  ARM: davinci: serial.h: fix uart number in the comment
  ARM: davinci: dm644x evm: move pointer dereference below NULL check
  ARM: vexpress: Make the debug UART detection more specific
2012-12-12 11:32:16 -08:00
Linus Torvalds
b1286f4e9a Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "Here's the updates for ARM for this merge window, which cover quite a
  variety of areas.

  There's a bunch of patch series from Will tackling various bugs like
  the PROT_NONE handling, ASID allocation, cluster boot protocol and
  ASID TLB tagging updates.

  We move to a build-time sorted exception table rather than doing the
  sorting at run-time, add support for the secure computing filter, and
  some updates to the perf code.  We also have sorted out the placement
  of some headers, fixed some build warnings, fixed some hotplug
  problems with the per-cpu TWD code."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits)
  ARM: 7594/1: Add .smp entry for REALVIEW_EB
  ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below
  ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets.
  ARM: 7595/1: syscall: rework ordering in syscall_trace_exit
  ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep
  ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch.
  ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU
  ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses
  ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6
  ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only
  ARM: 7587/1: implement optimized percpu variable access
  ARM: 7589/1: integrator: pass the lm resource to amba
  ARM: 7588/1: amba: create a resource parent registrator
  ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM
  ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init
  ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected
  ARM: gic: use a private mapping for CPU target interfaces
  ARM: kernel: add logical mappings look-up
  ARM: kernel: add cpu logical map DT init in setup_arch
  ARM: kernel: add device tree init map function
  ...
2012-12-12 11:30:02 -08:00