Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Relax the condition that overlayfs supports nfs export, to require
that i_ino is consistent with st_ino/d_ino.
It is enough to require that st_ino and d_ino are consistent.
This fixes the failure of xfstest generic/504, due to mismatch of
st_ino to inode number in the output of /proc/locks.
Fixes: 12574a9f4c ("ovl: consistent i_ino for non-samefs with xino")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlapping overlay layers are not supported and can cause unexpected
behavior, but overlayfs does not currently check or warn about these
configurations.
User is not supposed to specify the same directory for upper and
lower dirs or for different lower layers and user is not supposed to
specify directories that are descendants of each other for overlay
layers, but that is exactly what this zysbot repro did:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Moving layer root directories into other layers while overlayfs
is mounted could also result in unexpected behavior.
This commit places "traps" in the overlay inode hash table.
Those traps are dummy overlay inodes that are hashed by the layers
root inodes.
On mount, the hash table trap entries are used to verify that overlay
layers are not overlapping. While at it, we also verify that overlay
layers are not overlapping with directories "in-use" by other overlay
instances as upperdir/workdir.
On lookup, the trap entries are used to verify that overlay layers
root inodes have not been moved into other layers after mount.
Some examples:
$ ./run --ov --samefs -s
...
( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt
mount -o bind base/lower lower
mount -o bind base/upper upper
mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w)
$ umount mnt
$ mount -t overlay none mnt ...
-o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w
[ 94.434900] overlayfs: overlapping upperdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w
[ 151.350132] overlayfs: conflicting lowerdir path
mount: none is already mounted or mnt busy
$ mount -t overlay none mnt ...
-o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w
[ 201.205045] overlayfs: overlapping lowerdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w
$ mv base/upper/0/ base/lower/
$ find mnt/0
mnt/0
mnt/0/w
find: 'mnt/0/w/work': Too many levels of symbolic links
find: 'mnt/0/u': Too many levels of symbolic links
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:
mkdir foo work
mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"
The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.
The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.
On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.
Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.
The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes: 01b39dcc95 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This reverts commit 007ea44892.
The commit broke some selinux-testsuite cases, and it looks like there's no
straightforward fix keeping the direction of this patch, so revert for now.
The original patch was trying to fix the consistency of permission checks, and
not an observed bug. So reverting should be safe.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Make permission checking more consistent:
- special files don't need any access check on underling fs
- exec permission check doesn't need to be performed on underlying fs
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes the following sparse warning:
fs/overlayfs/inode.c:507:39: warning:
symbol 'ovl_aops' was not declared. Should it be static?
Fixes: 5b910bd615 ("ovl: fix GPF in swapfile_activate of file from overlayfs over xfs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Since overlayfs implements stacked file operations, the underlying
filesystems are not supposed to be exposed to the overlayfs file,
whose f_inode is an overlayfs inode.
Assigning an overlayfs file to swap_file results in an attempt of xfs
code to dereference an xfs_inode struct from an ovl_inode pointer:
CPU: 0 PID: 2462 Comm: swapon Not tainted
4.18.0-xfstests-12721-g33e17876ea4e #3402
RIP: 0010:xfs_find_bdev_for_inode+0x23/0x2f
Call Trace:
xfs_iomap_swapfile_activate+0x1f/0x43
__se_sys_swapon+0xb1a/0xee9
Fix this by not assigning the real inode mapping to f_mapping, which
will cause swapon() to return an error (-EINVAL). Although it makes
sense not to allow setting swpafile on an overlayfs file, some users
may depend on it, so we may need to fix this up in the future.
Keeping f_mapping pointing to overlay inode mapping will cause O_DIRECT
open to fail. Fix this by installing ovl_aops with noop_direct_IO in
overlay inode mapping.
Keeping f_mapping pointing to overlay inode mapping will cause other
a_ops related operations to fail (e.g. readahead()). Those will be
fixed by follow up patches.
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: f7c72396d0 ("ovl: add O_DIRECT support")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
truncate should copy up full file (and not do metacopy only), otherwise it
will be broken. For example, use truncate to increase size of a file so
that any read beyong existing size will return null bytes. If we don't
copy up full file, then we end up opening lower file and read from it only
reads upto the old size (and not new size after truncate). Hence to avoid
such situations, copy up data as well when file size changes.
So far it was being done by d_real(O_WRONLY) call in truncate() path. Now
that patch has been reverted. So force full copy up in ovl_setattr() if
size of file is changing.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add an ovl_inode flag OVL_CONST_INO. This flag signifies if inode number
will remain constant over copy up or not. This flag does not get updated
over copy up and remains unmodifed after setting once.
Next patch in the series will make use of this flag. It will basically
figure out if dentry is of type ORIGIN or not. And this can be derived by
this flag.
ORIGIN = (upperdentry && ovl_test_flag(OVL_CONST_INO, inode)).
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now ovl_inode stores inode pointer for lower inode. This helps with
quickly getting lower inode given overlay inode (ovl_inode_lower()).
Now with metadata only copy-up, we can have metacopy inode in middle layer
as well and inode containing data can be different from ->lower. I need to
be able to open the real file in ovl_open_realfile() and for that I need to
quickly find the lower data inode.
Hence store lower data inode also in ovl_inode. Also provide an helper
ovl_inode_lowerdata() to access this field.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If an inode has been copied up metadata only, then we need to query the
number of blocks from lower and fill up the stat->st_blocks.
We need to be careful about races where we are doing stat on one cpu and
data copy up is taking place on other cpu. We want to return
stat->st_blocks either from lower or stable upper and not something in
between. Hence, ovl_has_upperdata() is called first to figure out whether
block reporting will take place from lower or upper.
We now support metacopy dentries in middle layer. That means number of
blocks reporting needs to come from lowest data dentry and this could be
different from lower dentry. Hence we end up making a separate
vfs_getxattr() call for metacopy dentries to get number of blocks.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch modifies ovl_lookup() and friends to lookup metacopy dentries.
It also allows for presence of metacopy dentries in lower layer.
During lookup, check for presence of OVL_XATTR_METACOPY and if not present,
set OVL_UPPERDATA bit in flags.
We don't support metacopy feature with nfs_export. So in nfs_export code,
we set OVL_UPPERDATA flag set unconditionally if upper inode exists.
Do not follow metacopy origin if we find a metacopy only inode and metacopy
feature is not enabled for that mount. Like redirect, this can have
security implications where an attacker could hand craft upper and try to
gain access to file on lower which it should not have to begin with.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we use goto out_nomem which assumes error code is -ENOMEM. But
there are other errors returned like -ESTALE as well. So instead of
out_nomem, use out_err which will do ERR_PTR(err). That way one can put
error code in err and jump to out_err.
This just code reorganization and no change of functionality.
I am about to add more code and this organization helps laying more code
and error paths on top of it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now two copy up helpers are in inode.c. Amir suggested it might be
better to move these to copy_up.c.
There will one more related function which will come in later patch.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_inode->redirect is an inode property and should be initialized in
ovl_get_inode() only when we are adding a new inode to cache. If inode is
already in cache, it is already initialized and we should not be touching
ovl_inode->redirect field.
As of now this is not a problem as redirects are used only for directories
which don't share inode. But soon I want to use redirects for regular
files also and there it can become an issue.
Hence, move ->redirect initialization in ovl_get_inode().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Implement stacked fiemap().
Need to split inode operations for regular file (which has fiemap) and
special file (which doesn't have fiemap).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Implement file operations on a regular overlay file. The underlying file
is opened separately and cached in ->private_data.
It might be worth making an exception for such files when accounting in
nr_file to confirm to userspace expectations. We are only adding a small
overhead (248bytes for the struct file) since the real inode and dentry are
pinned by overlayfs anyway.
This patch doesn't have any effect, since the vfs will use d_real() to find
the real underlying file to open. The patch at the end of the series will
actually enable this functionality.
AV: make it use open_with_fake_path(), don't mess with override_creds
SzM: still need to mess with override_creds() until no fs uses
current_cred() in their open method.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Copy i_size of the underlying inode to the overlay inode in ovl_copyattr().
This is in preparation for stacking I/O operations on overlay files.
This patch shouldn't have any observable effect.
Remove stale comment from ovl_setattr() [spotted by Vivek Goyal].
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This reverts commit 31c3a70695.
Re-add functionality dealing with i_writecount on truncate to overlayfs.
This patch shouldn't have any observable effects, since we just re-assert
the writecout that vfs_truncate() already got for us.
This is in preparation for moving overlay functionality out of the VFS.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Copy up mtime and ctime to overlay inode after times in real object are
modified. Be careful not to dirty cachelines when not necessary.
This is in preparation for moving overlay functionality out of the VFS.
This patch shouldn't have any observable effect.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
Currently, there is a small window where ovl_obtain_alias() can
race with ovl_instantiate() and create two different overlay inodes
with the same underlying real non-dir non-hardlink inode.
The race requires an adversary to guess the file handle of the
yet to be created upper inode and decode the guessed file handle
after ovl_creat_real(), but before ovl_instantiate().
This race does not affect overlay directory inodes, because those
are decoded via ovl_lookup_real() and not with ovl_obtain_alias().
This patch fixes the race, by using inode_insert5() to add a newly
created inode to cache.
If the newly created inode apears to already exist in cache (hashed
by the same real upper inode), we instantiate the dentry with the old
inode and drop the new inode, instead of silently not hashing the new
inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_get_inode() right now has 5 parameters. Soon this patch series will
add 2 more and suddenly argument list starts looking too long.
Hence pass arguments to ovl_get_inode() in a structure and it looks
little cleaner.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When overlay layers are not all on the same fs, but all inode numbers
of underlying fs do not use the high 'xino' bits, overlay st_ino values
are constant and persistent.
In that case, set i_ino value to the same value as st_ino for nfsd
readdirplus validator.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On 64bit systems, when overlay layers are not all on the same fs, but
all inode numbers of underlying fs are not using the high bits, use the
high bits to partition the overlay st_ino address space. The high bits
hold the fsid (upper fsid is 0). This way overlay inode numbers are unique
and all inodes use overlay st_dev. Inode numbers are also persistent
for a given layer configuration.
Currently, our only indication for available high ino bits is from a
filesystem that supports file handles and uses the default encode_fh()
operation, which encodes a 32bit inode number.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of allocating an anonymous bdev per lower layer, allocate
one anonymous bdev per every unique lower fs that is different than
upper fs.
Every unique lower fs is assigned an fsid > 0 and the number of
unique lower fs are stored in ofs->numlowerfs.
The assigned fsid is stored in the lower layer struct and will be
used also for inode number multiplexing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A helper for ovl_getattr() to map the values of st_dev and st_ino
according to constant st_ino rules.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For broken hardlinks, we do not return lower st_ino, so we should
also not return lower pseudo st_dev.
Fixes: a0c5ad307a ("ovl: relax same fs constraint for constant st_ino")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Eddie Horng reported that readdir of an overlayfs directory that
was exported via NFSv3 returns entries with d_type set to DT_UNKNOWN.
The reason is that while preparing the response for readdirplus, nfsd
checks inside encode_entryplus_baggage() that a child dentry's inode
number matches the value of d_ino returns by overlayfs readdir iterator.
Because the overlayfs inodes use arbitrary inode numbers that are not
correlated with the values of st_ino/d_ino, NFSv3 falls back to not
encoding d_type. Although this is an allowed behavior, we can fix it for
the case of all overlayfs layers on the same underlying filesystem.
When NFS export is enabled and d_ino is consistent with st_ino
(samefs), set the same value also to i_ino in ovl_fill_inode() for all
overlayfs inodes, nfsd readdirplus sanity checks will pass.
ovl_fill_inode() may be called from ovl_new_inode(), before real inode
was created with ino arg 0. In that case, i_ino will be updated to real
upper inode i_ino on ovl_inode_init() or ovl_inode_update().
Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Tested-by: Eddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 8383f17488 ("ovl: wire up NFS export operations")
Cc: <stable@vger.kernel.org> #v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 31747eda41 ("ovl: hash directory inodes for fsnotify")
fixed an issue of inotify watch on directory that stops getting
events after dropping dentry caches.
A similar issue exists for non-dir non-upper files, for example:
$ mkdir -p lower upper work merged
$ touch lower/foo
$ mount -t overlay -o
lowerdir=lower,workdir=work,upperdir=upper none merged
$ inotifywait merged/foo &
$ echo 2 > /proc/sys/vm/drop_caches
$ cat merged/foo
inotifywait doesn't get the OPEN event, because ovl_lookup() called
from 'cat' allocates a new overlay inode and does not reuse the
watched inode.
Fix this by hashing non-dir overlay inodes by lower real inode in
the following cases that were not hashed before this change:
- A non-upper overlay mount
- A lower non-hardlink when index=off
A helper ovl_hash_bylower() was added to put all the logic and
documentation about which real inode an overlay inode is hashed by
into one place.
The issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.
Cc: <stable@vger.kernel.org> #v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a dir file handle requires walking backward up to layer root and
for lower dir also checking the index to see if any of the parents have
been copied up.
Lookup overlay ancestor dentry in inode/dentry cache by decoded real
parents to shortcut looking up all the way back to layer root.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Non-indexed upper dirs are encoded as upper file handles. When NFS export
is enabled, hash non-indexed directory inodes by upper inode, so we can
find them in inode cache using the decoded upper inode.
When NFS export is disabled, directories are not indexed on copy up, so
hash non-indexed directory inodes by origin inode, the same hash key
that is used before copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Lookup overlay inode in cache by origin inode, so we can decode a file
handle of an open file even if the index has a whiteout index entry to
mark this overlay inode was unlinked.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With NFS export, some operations on decoded file handles (e.g. open,
link, setattr, xattr_set) may call copy up with a disconnected non-dir.
In this case, we will copy up lower inode to index dir without
linking it to upper dir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is needed for using ovl_get_inode() for decoding file handles
for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On a malformed overlay, several redirected dirs can point to the same
dir on a lower layer. This presents a similar challenge as broken
hardlinks, because different objects in the overlay can return the same
st_ino/st_dev pair from stat(2).
For broken hardlinks, we do not provide constant st_ino on copy up to
avoid this inconsistency. When NFS export feature is enabled, apply
the same logic to files and directories with unverified lower origin.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fsnotify pins a watched directory inode in cache, but if directory dentry
is released, new lookup will allocate a new dentry and a new inode.
Directory events will be notified on the new inode, while fsnotify listener
is watching the old pinned inode.
Hash all directory inodes to reuse the pinned inode on lookup. Pure upper
dirs are hashes by real upper inode, merge and lower dirs are hashed by
real lower inode.
The reference to lower inode was being held by the lower dentry object
in the overlay dentry (oe->lowerstack[0]). Releasing the overlay dentry
may drop lower inode refcount to zero. Add a refcount on behalf of the
overlay inode to prevent that.
As a by-product, hashing directory inodes also detects multiple
redirected dirs to the same lower dir and uncovered redirected dir
target on and returns -ESTALE on lookup.
The reported issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.
Cc: <stable@vger.kernel.org> #v4.13
Reported-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
For the case of all layers not on the same fs, return the copy up origin
inode st_dev/st_ino for non-dir from stat(2).
This guaranties constant st_dev/st_ino for non-dir across copy up.
Like the same fs case, st_ino of non-dir is also persistent.
If the st_dev/st_ino for copied up object would have been the same as
that of the real underlying lower file, running diff on underlying lower
file and overlay copied up file would result in diff reporting that the
two files are equal when in fact, they may have different content.
Therefore, unlike the same fs case, st_dev is not persistent because it
uses the unique anonymous bdev allocated for the lower layer.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For non-samefs setup, to make sure that st_dev/st_ino pair is unique
across the system, we return a unique anonymous st_dev for stat(2)
of lower layer inode.
A following patch is going to fix constant st_dev/st_ino across copy up
by returning origin st_dev/st_ino for copied up objects.
If the st_dev/st_ino for copied up object would have been the same as
that of the real underlying lower file, running diff on underlying lower
file and overlay copied up file would result in diff reporting that the
2 files are equal when in fact, they may have different content.
[amir: simplify ovl_get_pseudo_dev()
split from allocate anonymous bdev patch]
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Most overlayfs c files already explicitly include ovl_entry.h
to use overlay entry struct definitions and upcoming changes
are going to require even more c files to include this header.
All overlayfs c files include overlayfs.h and overlayfs.h itself
refers to some structs defined in ovl_entry.h, so it seems more
logic to include ovl_entry.h from overlayfs.h than from c files.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a non-merge dir in an overlay mount has an overlay.origin xattr, it
means it was once an upper merge dir, which may contain whiteouts and
then the lower dir was removed under it.
Do not iterate real dir directly in this case to avoid exposing whiteouts.
[SzM] Set OVL_WHITEOUT for all merge directories as well.
[amir] A directory that was just copied up does not have the OVL_WHITEOUTS
flag. We need to set it to fix merge dir iteration.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixes a lockdep splat when mounting a nested overlayfs.
Fixes: a015dafcaf ("ovl: use ovl_inode mutex to synchronize...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit fbaf94ee3c ("ovl: don't set origin on broken lower hardlink")
attempt to avoid the condition of non-indexed upper inode with lower
hardlink as origin. If this condition is found, lookup returns EIO.
The protection of commit mentioned above does not cover the case of lower
that is not a hardlink when it is copied up (with either index=off/on)
and then lower is hardlinked while overlay is offline.
Changes to lower layer while overlayfs is offline should not result in
unexpected behavior, so a permanent EIO error after creating a link in
lower layer should not be considered as correct behavior.
This fix replaces EIO error with success in cases where upper has origin
but no index is found, or index is found that does not match upper
inode. In those cases, lookup will not fail and the returned overlay inode
will be hashed by upper inode instead of by lower origin inode.
Fixes: 359f392ca5 ("ovl: lookup index entry for copy up origin")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit b9ac5c274b ("ovl: hash overlay non-dir inodes by copy up origin")
verifies that the origin lower inode stored in the overlayfs inode matched
the inode of a copy up origin dentry found by lookup.
There is a false positive result in that check when lower fs does not
support file handles and copy up origin cannot be followed by file handle
at lookup time.
The false negative happens when finding an overlay inode in cache on a
copied up overlay dentry lookup. The overlay inode still 'remembers' the
copy up origin inode, but the copy up origin dentry is not available for
verification.
Relax the check in case copy up origin dentry is not available.
Fixes: b9ac5c274b ("ovl: hash overlay non-dir inodes by copy up...")
Cc: <stable@vger.kernel.org> # v4.13
Reported-by: Jordi Pujol <jordipujolp@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
