This caused the internal speaker to mute itself because it was
present, which happened after powersave.
It was found on Dell XPS 15 (L502x), ALC665.
Reported-by: Da Fox <da.fox.mail@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It turned out that the COMBO position fix mode is rather more harmful,
and it got reverted (with the replacement of runtime->delay
calculation) recently. Hence we can get rid of AZX_DCAPS_POSFIX_COMBO
as well.
It's still possible to pass this mode via position_fix module option,
in case where this really helps on weird machines (who knows).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the transition to the generic fixup code, the call of
snd_hda_gen_init() and snd_hda_gen_free() was missing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [4b527b65 ALSA: hda - limit internal mic boost for Asus
X202E] introduced the use of auto-parser code, but it forgot to add
struct hda_gen_spec at the head of codec->spec which the auto-parser
assumes silently. Without this record, it may result in memory
corruption.
This patch adds the missing piece.
Cc: <stable@vger.kernel.org> [v3.5+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell Latitude 5x30 and 6x30 series of machines all have
a single 4-pin headset jack. Enabling line in mode for such jack
is very confusing (you would only get mono input, and would have to
use non-standard adapters), so remove the option by default.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
From what I can conclude all GPIO handling was removed in 2009.
Remove dead code remnants.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In case there is one "Headphone Jack" and one "Dock Headphone Jack",
one of them will get an index, even though that is not needed.
This patch fixes that issue.
BugLink: https://bugs.launchpad.net/bugs/1060729
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After the recent patch "ALSA: hda - use both input paths on Conexant
auto parser" suddenly we can have more than one "Mic Boost", this
happened on Acer Aspire One 722. Therefore we must add the possibility
to put an index on this "Mic Boost" just as we do for the other
"Mic Boost" earlier in the same function.
BugLink: https://bugs.launchpad.net/bugs/1059523
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There was a race condition when the system suspends while hda_power_work
is running in the work queue. If system suspend (snd_hda_suspend)
happens after the work queue releases power_lock but before it calls
hda_call_codec_suspend, codec_suspend runs with power_on=0, causing the
codec to power up for register reads, and hanging when it calls
cancel_delayed_work_sync from the running work queue.
The call chain from the work queue will look like this:
hda_power_work <<- power_on = 1, unlock, then power_on cleard by suspend
hda_call_codec_suspend
hda_set_power_state
snd_hda_codec_read
codec_exec_verb
snd_hda_power_up
snd_hda_power_save
__snd_hda_power_up
cancel_delayed_work_sync <<-- cancelling executing wq
Fix this by waiting for the work queue to finish before starting suspend
if suspend is not happening on the work queue.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r1@
statement S;
position p,p1;
@@
S@p1;@p
@script:python r2@
p << r1.p;
p1 << r1.p1;
@@
if p[0].line != p1[0].line_end:
cocci.include_match(False)
@@
position r1.p;
@@
-;@p
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In commit af741c1 ("ALSA: hda/realtek - Call alc_auto_parse_customize_define()
always after fixup"), alc_auto_parse_customize_define was moved after
detection of ALC271X.
The problem is that detection of ALC271X relies on spec->cdefine.platform_type,
and it's set on alc_auto_parse_customize_define.
Move the alc_auto_parse_customize_define and its required fixup setup
before the block doing the ALC271X and other codec setup.
BugLink: https://bugs.launchpad.net/bugs/1006690
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Reviewed-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo IdeaPad U310 has an internal mic where the right channel
is phase inverted.
Signed-off-by: Felix Kaechele <felix@fetzig.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For less duplication of code between codecs, and to make it easier
in the future to improve code for all codecs simultaneously.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Moving towards less duplication of code between codecs - this patch
takes some of the common code of unsol event handling and makes it
generic.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lots and lots of driver specific cleanups and enhancements but the only
substantial framework feature this time round is the compressed API
binding:
- Addition of ASoC bindings for the compressed API, used by the mid-x86
drivers.
- Lots of cleanups and API refreshes for CODEC drivers and DaVinci.
- Conversion of OMAP to dmaengine.
- New machine driver for Wolfson Microelectronics Bells.
- New CODEC driver for Wolfson Microelectronics WM0010.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=JSSt
-----END PGP SIGNATURE-----
Merge tag 'asoc-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.7
Lots and lots of driver specific cleanups and enhancements but the only
substantial framework feature this time round is the compressed API
binding:
- Addition of ASoC bindings for the compressed API, used by the mid-x86
drivers.
- Lots of cleanups and API refreshes for CODEC drivers and DaVinci.
- Conversion of OMAP to dmaengine.
- New machine driver for Wolfson Microelectronics Bells.
- New CODEC driver for Wolfson Microelectronics WM0010.
Tested with LPIB delay without any issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DMA Position in Buffer (DPIB) should be used for
ring buffer management, while LPIB register provides
information on the number of samples transfered on
the link. The difference between the two pieces of
information corresponds to hardware/DMA buffering.
This patch reports this difference in runtime->delay, and
removes the use of the COMBO mode on recent Intel hardware.
Credits to Takashi Iwai for an initial patch.
[rebased to for-next branch and replaced snd_printk() with
snd_printdd() by tiwai]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SSYNC bits are typically used to start multiple
streams synchronously. It makes sense to use them
for a single stream for a more predictable startup
sequence. The transfers only start once the DMA and
FIFOs are ready. This results in a better correlation
between timestamps and number of samples played.
Credits to Kar Leong Wang for suggesting this
improvement.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If headphone jack can't detect plug presence, and we have the jack in
the jack table, snd_hda_jack_detect will return the plug as always
present (as it'll be considered as a phantom jack). The problem is that
when this happens, line out pins will always be disabled, resulting in
no sound if there are no headphones connected.
This was reported as a no sound problem after suspend on
http://bugs.launchpad.net/bugs/1052499, since the bug doesn't manifests
on first initialization before the phantom jack is added, but on resume
we reexecute the initialization code, and via_hp_automute starts
reporting HP always present with the jack now on the table.
BugLink: https://bugs.launchpad.net/bugs/1052499
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: <stable@vger.kernel.org> [v3.6+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On the Thinkpad W520 - and probably several other machines with
Conexant 506x chips - the Dock Mic and Mic are connected to the
same two selector nodes. This patch will make Dock Mic take one
selector node and Mic take the other, when possible.
Without the patch, both paths would take the first selector,
leading to the normal Mic's volume being controlled by
"Dock Mic Boost".
(On other machines, this could instead fixup similar problems between
Mic and Line In, for example.)
BugLink: https://bugs.launchpad.net/bugs/1037642
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The standard name (and what PulseAudio picks up) is "Dock Mic",
not "Docking Mic" or "Docking-Station".
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the input gain for the internal mic is set to its maximum level,
the background noise becomes so high - and any relevant signal clipped -
that the setting becomes unusable. It is better to limit the amplification.
BugLink: https://bugs.launchpad.net/bugs/1052460
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org> [v3.5+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of new HP laptops have a LED for microphone (or recording) mute,
and it's controlled by GPIO pin 3.
Bind this with the capture switch to turn it on/off properly by the
mixer change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set the default value of position_fix -1, and allow user passing
position_fix=0 explicitly to set the "auto" position-fix mode.
Otherwise the auto mode may be switched to others like COMBO of
VIACOMBO when the controller prefers it, thus user can't set the auto
mode any longer.
Also updated the documentation appropriately, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to the definitions of CS420X_IMAC27_122 and CS420X_APPLE as
aliases, the rest enums are set to duplicated values unexpectedly.
Move the alias definitions at the end so that the enum values are
defined in the proper order.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For following the standard, define more channel map positions and
shuffle the items a bit:
- As both PulseAudio and gstreamer define MONO channel position
explicitly, we should follow that, too. The mono streams point to
this channel position unless they are explicitly assigned to certain
channel positions.
- Top-front-* and Top-rear-* positions are added, carried from
PulseAudio's definitions.
- Move NA and MONO definitions at the top of table right after
UNKNOWN, since these are more abstract in comparison with other
practical positions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The AK4396 DAC has a linear-scale attentuator, but
sound/pci/ice1712/prodigy_hifi.c used a log scale instead, which is
not quite right. This patch restores the correct scale, borrowing
from the ak4396 code in sound/pci/oxygen/oxygen.c.
Signed-off-by: Matteo Frigo <athena@fftw.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Provide channel maps for individual stereo streams of ENS1370 and
ENS1371. Note that the configuration of ENS1370 uses the secondary
PCM as the front unlike ENS1371.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MacBook Pro 10,1 needs a few adjustments to make it working:
- more COEF verbs
- some pin config overrides to disable the unused pin (0x0d, 0x12),
and fix the internal mic (0x0e)
In addition, it uses GPIO 1 and 3 like other MacBooks.
The internal digital mic on the machine is still problematic: it seems
that only the right channel is used and the left is always static.
This looks like a hardware design, so we need to cope in the software
side somehow...
The primary information and test were brought from Daniel J Blueman.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hda_pick_fixup() didn't check the case where the device mask bits
are set, typically used for SND_PCI_QUIRK_VENDOR() entries. Fix this.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Originally the bogus period at BDL head was introduced as a workaround
for the mismatching position update at the period boundary, typically
seen on dmix. However, for applications like PulseAudio that don't
require period wake ups, this workaround is just superfluous. Thus
better to disable it when no_period_wakeup is given in hw_params.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit c20c5a841c changed some chipsets to
default to POS_FIX_COMBO so they now use POS_FIX_LPIB instead of
POS_FIX_POSBUF. Since then I've been getting artifacts on playback, including
repeated sounds on my Asus laptop.
My hardware is Cougar Point which the commit log of
c20c5a841c mentions as tested so POS_FIX_COMBO
probably works in general but apparently it doesn't on Asus K53E therefore the
need for the quirk.
Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
