Additional toggles have pushed the help line out of view on a modestly
sized terminal (120 columns wide). Shorten it to just reminders.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336510879-64610-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf-record defaults to the H/W cycles event and if it is not supported
falls back to cpu-clock. Reset the event name as well.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336495811-58461-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf top' command falls back to cpu-clock if the H/W cycles event
is not supported, but the event name is not updated leading to a
misleading header:
PerfTop: 8 irqs/sec kernel:75.0% exact: 0.0% [1000Hz cycles], ...
Update the event name when the event type is changed so that the
header displays correctly:
PerfTop: 794 irqs/sec kernel:100.0% exact: 0.0% [1000Hz cpu-clock], ...
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336495789-58420-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat on PPC currently fails to run:
$ perf stat -- sleep 1
Error: open_counter returned with 6 (No such device or address). /bin/dmesg may provide additional information.
Fatal: Not all events could be opened.
The problem is that until 2.6.37 (behavior changed with commit b0a873e)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:
$ perf stat -v -- sleep 1
cycles event is not supported by the kernel.
stalled-cycles-frontend event is not supported by the kernel.
stalled-cycles-backend event is not supported by the kernel.
instructions event is not supported by the kernel.
branches event is not supported by the kernel.
branch-misses event is not supported by the kernel.
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490956-57145-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf-record on PPC is not falling back to cpu-clock:
$ perf record -ag -fo /tmp/perf.data -- sleep 1
Error: sys_perf_event_open() syscall returned with 6 (No such device or address). /bin/dmesg may provide additional information.
Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
The problem is that until 2.6.37 (behavior changed with commit b0a873e)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:
$ perf record -ag -fo /tmp/perf.data -v -- sleep 1
Old kernel, cannot exclude guest or host samples.
The cycles event is not supported, trying to fall back to cpu-clock-ticks
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.151 MB /tmp/perf.data (~6592 samples) ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490937-57106-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Additionally we were not checking if a cpu list had been provided by the
user. Fix that.
Reported-by: David Ahern <dsahern@gmail.com>
Reported-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ao3zrouylwmt7h9ikj0krubi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use same function with perf record and top to share the code checks
combinations of different switches.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-8-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are places that check whether target task/cpu is given or not and
some of them didn't check newly introduced uid or cpu list. Add and use
three of helper functions to treat them properly.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-7-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_target__strerror() sets @buf to a string that describes the
(perf_target-specific) error condition that is passed via @errnum.
This is similar to strerror_r() and does same thing if @errnum has a
standard errno value.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-6-git-send-email-namhyung.kim@lge.com
[ committer note: No need to use PERF_ERRNO_TARGET__SUCCESS, use shorter idiom ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add and use the modern perf_target__parse_uid() and get rid of the old
parse_target_uid().
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_target_errno enumerations are used to indicate specific error
cases on perf target operations. It'd help libperf being a more generic
library.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, 'perf record -- sleep 1' creates a cpu map for all online
cpus since it turns out calling cpu_map__new(NULL). Fix it.
Also it is guaranteed that cpu_list is NULL if PID/TID is given by
calling perf_target__validate(), so we can make the conditional bit
simpler.
This also fixes perf test 7 (Validate) failure on my 6 core machine:
$ cat /sys/devices/system/cpu/online
0-11
$ ./perf test -v 7
7: Validate PERF_RECORD_* events & perf_sample fields:
--- start ---
perf_evlist__mmap: Operation not permitted
---- end ----
Validate PERF_RECORD_* events & perf_sample fields: FAILED!
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check if neither of --pid, --tid or --uid was specified and if so, set
system_wide appropriately.
Namhyung's patch would make using any of the above target specifiers
emit a warning in perf_target__validate, since it would see
target.system_wide set and one of the others as well.
So set system_wide after validation.
Suggested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6e4zrji1uw0rinfyoitl0wi4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently if we cannot decide the size of the event, we guess next
event possition by:
"... check alignment, and increment a single u64 in the hope
to catch on again 'soon'"
This usually ends up with segfault or endless loop. It's better
to admit the failure right away, then pretend nothing happened.
It makes the life easier ;)
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120416184251.GA11503@m.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If gtk2 support is not enabled (or failed for some reason) try TUI again
instead of falling directly back to the stdio interface.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-6-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now setup_browser can handle gtk2 front-end so split the TUI code to
ui/tui/setup.c in order to remove dependency.
To this end, make ui__init/exit global symbols and take an argument.
Also split gtk code to ui/gtk/setup.c.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use double underscore characters to distinguish its subsystem and
actual function name.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As perf doesn't allow to specify gtk command-line option, drop the
arguments and pass NULL to gtk_init().
This makes the function easier to be called from setup_browser().
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The setup_browser contained newt-related codes in it.
As gtk front-end added recently, it should be more generic to handle
both cases properly.
So move newt codes to the ui__init() for now.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335761711-31403-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For further work on perf_target, it'd be better off splitting the code
into a separate file.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-9-git-send-email-namhyung.kim@lge.com
[ committer note: Fixed perl build by using stdbool and types.h in target.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There were some combinations of these switches that are not so
appropriate IMHO.
Since there are implicit priorities between them and they worked well
anyway, but it ends up opening useless duplicated events.
For example, 'perf stat -t <pid> -a' will open multiple events for the
thread instead of one.
Add explicit checks and warn user in perf_target__validate().
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-7-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have all information that needed to create cpu/thread maps in
struct perf_target, it'd be better using it as an argument.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-6-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_target__validate function is used to check given PID/TID/UID/CPU
target options and warn if some combination is impossible. Also this can
make some arguments of parse_target_uid() function useless as it is checked
before the call via our new helper.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use struct perf_target as it is introduced by previous patch.
This is a preparation of further changes.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-4-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use struct perf_target as it is introduced by previous patch.
This is a preparation of further changes.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_target struct will be used for taking care of cpu/thread maps
based on user's input. Since it is used on various subcommands it'd
better factoring it out.
Thanks to Arnaldo for suggesting the better name.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Include header fixes for
... bool:
util/parse-events.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘have_tracepoints’
... and types.h:
util/parse-events.h:28: error: expected ‘)’ before ‘config’
util/parse-events.h:34: error: expected declaration specifiers or ‘...’ before ‘u64’
util/parse-events.h:45: error: expected ‘)’ before ‘type’
This happens if now other include files are included before
util/parse-events.h.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-2-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was unconditionally printing debug stuff when in non -v mode we
should just print the name and result of the test.
Now:
[root@sandy ~]# perf test rdpmc
6: x86 rdpmc test: Ok
[root@sandy ~]# perf test -v rdpmc
6: x86 rdpmc test:
--- start ---
0: 6030
1: 60030
2: 600050
3: 6000056
4: 60000070
5: 600000266
---- end ----
x86 rdpmc test: Ok
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0tjedaozsy9oarq30nvzg74b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The if branch is completely unnecessary since 'realloc' handles NULL
pointers for the first parameter.
This is really only a cleanup and submitted mainly to prevent
proliferation of bad practices.
Signed-off-by: Ulrich Drepper <drepper@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/201204231304.q3ND4TFe020805@drepperk.user.openhosting.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use cpu-clock-tick sw counter for cpu-cycles only if there is no hw
pmu available. This is the case if the syscall reports ENOENT. In
other cases (e.g. invalid attributes) we don't want the sw counter to
be used.
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-5-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move those files to new directory in order to be prepared to
further UI work. Makefile and header file pathes are adjusted
accordingly. Also fix a build breakage if NO_GTK2=1 is given.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1333523765-12092-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move those files to new directory in order to be prepared to further UI
work. Makefile and header file pathes are adjusted accordingly.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1333523666-12057-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CC util/annotate.o
util/annotate.c: In function symbol__annotate:
util/annotate.c:87:16: error: parsed_line may be used uninitialized in this function [-Werror=maybe-uninitialized]
util/annotate.c:211:22: note: parsed_line was declared here
cc1: all warnings being treated as errors
make: *** [util/annotate.o] Error 1
make: *** Waiting for unfinished jobs....
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ashay Rane <ashay.rane@tacc.utexas.edu>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87ty0tlv4i.fsf@dasan.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the parsers objects (bison/flex related) are each time perf
is built. No matter the generated files are already in place, the
parser generation is executed every time.
Changing the rules to have proper flex/bison objects generation
dependencies.
The parsers code is not rebuilt until the flex/bison source files
are touched. Also when flex/bison source is changed, only dependent
objects are rebuilt.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334140791-3024-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now you can do
$ make tools/<toolname>
from the toplevel kernel directory and have the respective tool built.
If you want to build and install it, do
$ make tools/<toolname>_install
$ make tools/<toolname>_clean
should clean the respective tool directories.
If you want to clean all in tools, simply do
$ make tools/clean
Also, if you want to get what the possible targets are, simply calling
$ make tools/
should give you the short help.
$ make tools/install
installs all tools, of course. Doh.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-6-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
... and make it the default one so that calling 'make' without arguments
in the tools/ directory gives you the possible targets to build along
with a short description of what they are.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-5-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a Makefile with all the targets under tools/.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-4-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use += instead of the bash syntax, as Sam Ravnborg suggests. Also, sort
the -W options alphabetically and (... keep them sorted).
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-3-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Put generic enough build settings which could be reused by other tools
into a common Makefile.include file.
This commit reintroduces QUIET_SUBDIR{0,1} (see a3d1ee10d1) which are
going to be used in the following patches.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-2-git-send-email-bp@amd64.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 65f3e56e0c ("perf tools: Remove auto-generated bison/flex
files") removed those files from git, so they'll be listed on untracked
files after building perf. Fix it.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333948274-20043-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the same keystrokes as vim:
/ = search forward
n = search next forward/backwards
? = search backwards
Still needs to continue from start/end when not found, use HOME + / or
END + ? for now.
At some point we need a keybindings file to support ones favourite mode,
erm, like EMACS, etc.
Also we now need a 'h' window with all these keybindings.
Requested-by: Andi Kleen <andi@firstfloor.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rv30xj2i258n0gwkzlu0c0bc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch prints the number of samples and the count of performance
events separately.
This allows comparing performance of different applications with each
other.
Previously, the sample count was displayed against an 'Events:' heading.
With this patch, the header now reads (for example):
Samples: 5K of event 'instructions'
Event count (approx.): 2993026545
The patch covers both the stdio and the browser interface.
Signed-off-by: Ashay Rane <ashay.rane@tacc.utexas.edu>
[ committer note: Fixed wrt e7f01d1 ]
Link: http://lkml.kernel.org/n/tip-h4nfjm8msedlk8gxkzivfh5y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now it is possible to press ENTER or -> (right arrow) on jump
instructions to navigate to the offset it points to.
More work needed to support <- to go back, i.e. a jump history.
This is done just like the callq case, i.e. parsing objdump output
lines, but should move to use Masami's disassembler at some point.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-706qqe2xibeiocuabp39mby7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
From the hit sorted rb_tree, so that we can use it in the upcoming jump
instruction support.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-44a7kl2atf9jxlg9npmotzdg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can as well handle jumps. Later we'll move this to a proper
intruction table, etc.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i98elvmix2cw6t8stu1iagfd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The lines in objdump have this format:
ffffffff8126543f: jne ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
ffffffff81265494: mov %rdi,%rcx
Since we now have objdump_line allowing tools to print the offset
independently from the rest of the line, allow toggling a view where
just offsets from the start of the function are shown:
2f: jne ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
84: mov %rdi,%rcx
The offset view will be the default as soon as operations that deal with
offsets in a function are handled accodringly, i.e. in offset view the
above will become:
2f: jne __list_del_entry+0x84
<SNIP>
84: mov %rdi,%rcx
And then a follow up patch will allow navigating thru jumps, just like
we handle callq instructions.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4zpgimmz8xv7b5c920el7s45@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
