* for-5.10/block: (140 commits)
bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag
bdi: invert BDI_CAP_NO_ACCT_WB
bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag
mm: use SWP_SYNCHRONOUS_IO more intelligently
bdi: remove BDI_CAP_SYNCHRONOUS_IO
bdi: remove BDI_CAP_CGROUP_WRITEBACK
block: lift setting the readahead size into the block layer
md: update the optimal I/O size on reshape
bdi: initialize ->ra_pages and ->io_pages in bdi_init
aoe: set an optimal I/O size
bcache: inherit the optimal I/O size
drbd: remove dead code in device_to_statistics
fs: remove the unused SB_I_MULTIROOT flag
block: mark blkdev_get static
PM: mm: cleanup swsusp_swap_check
mm: split swap_type_of
PM: rewrite is_hibernate_resume_dev to not require an inode
mm: cleanup claim_swapfile
ocfs2: cleanup o2hb_region_dev_store
dasd: cleanup dasd_scan_partitions
...
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the
backing_dev_info shared between the block drivers and the writeback code.
To help untangling the dependency replace it with a queue flag and a
superblock flag derived from it. This also helps with the case of e.g.
a file system requiring stable writes due to its own checksumming, but
not forcing it on other users of the block device like the swap code.
One downside is that we an't support the stable_pages_required bdi
attribute in sysfs anymore. It is replaced with a queue attribute which
also is writable for easier testing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just checking SB_I_CGROUPWB for cgroup writeback support is enough.
Either the file system allocates its own bdi (e.g. btrfs), in which case
it is known to support cgroup writeback, or the bdi comes from the block
layer, which always supports cgroup writeback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drivers shouldn't really mess with the readahead size, as that is a VM
concept. Instead set it based on the optimal I/O size by lifting the
algorithm from the md driver when registering the disk. Also set
bdi->io_pages there as well by applying the same scheme based on
max_sectors. To ensure the limits work well for stacking drivers a
new helper is added to update the readahead limits from the block
limits, which is also called from disk_stack_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set up a readahead size by default, as very few users have a good
reason to change it. This means code, ecryptfs, and orangefs now
set up the values while they were previously missing it, while ubifs,
mtd and vboxsf manually set it to 0 to avoid readahead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Richard Weinberger <richard@nod.at> [ubifs, mtd]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blkdev_get_by_dev instead of open coding it using bdget_disk +
blkdev_get, and split the code to read the partition table into a
separate helper to make it a little more obvious.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can only scan for partitions on the whole disk, so move the flag
from struct block_device to struct gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is possible, albeit more unlikely, for a block device to have a non
power-of-2 for chunk_sectors (e.g. 10+2 RAID6 with 128K chunk_sectors,
which results in a full-stripe size of 1280K. This causes the RAID6's
io_opt to be advertised as 1280K, and a stacked device _could_ then be
made to use a blocksize, aka chunk_sectors, that matches non power-of-2
io_opt of underlying RAID6 -- resulting in stacked device's
chunk_sectors being a non power-of-2).
Update blk_queue_chunk_sectors() and blk_max_size_offset() to
accommodate drivers that need a non power-of-2 chunk_sectors.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Like 'io_opt', blk_stack_limits() should stack 'chunk_sectors' using
lcm_not_zero() rather than min_not_zero() -- otherwise the final
'chunk_sectors' could result in sub-optimal alignment of IO to
component devices in the IO stack.
Also, if 'chunk_sectors' isn't a multiple of 'physical_block_size'
then it is a bug in the driver and the device should be flagged as
'misaligned'.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bmd is allocated using kmalloc in bio_alloc_map_data, so make sure
is_null_mapped is properly initialized to false for the !null_mapped
case.
Fixes: f3256075ba ("block: remove the BIO_NULL_MAPPED flag")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x;
@@
x =
- kzalloc
+ kmalloc
(...)
...
sg_init_table(x,...)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do not need check the bps or iops limitation if bps or iops is unlimited.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The tg_may_dispatch() will call tg_with_in_bps_limit() and
tg_with_in_iops_limit() to check if we can dispatch a bio or
not, which will calculate bps/iops limitation multiple times.
But tg_may_dispatch() is always called under queue lock, which
means the bps/iops limitation will not change in tg_may_dispatch().
So we can calculate the bps/iops limitation only once, and pass
them to tg_with_in_bps_limit() and tg_with_in_iops_limit() to
avoid calculating bps/iops limitation repeatedly.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'throtl_grp_quantum' and 'throtl_quantum' are both read-only
variables, thus better to use readable macros instead of static
variables, which can also save some spaces for .bss area.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
adjust_inuse_and_calc_cost() is responsible for reducing the amount of
donated weights dynamically in period as the budget runs low. Because we
don't want to do full donation calculation in period, we keep latching up
inuse by INUSE_ADJ_STEP_PCT of the active weight of the cgroup until the
resulting hweight_inuse is satisfactory.
Unfortunately, the adj_step calculation was reading the active weight before
acquiring ioc->lock. Because the current thread could have lost race to
activate the iocg to another thread before entering this function, it may
read the active weight as zero before acquiring ioc->lock. When this
happens, the adj_step is calculated as zero and the incremental adjustment
loop becomes an infinite one.
Fix it by fetching the active weight after acquiring ioc->lock.
Fixes: b0853ab4a2 ("blk-iocost: revamp in-period donation snapbacks")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Conceptually, root_iocg->hweight_donating must be less than WEIGHT_ONE but
all hweight calculations round up and thus it may end up >= WEIGHT_ONE
triggering divide-by-zero and other issues. Bound the value to avoid
surprises.
Fixes: e08d02aa5f ("blk-iocost: implement Andy's method for donation weight updates")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These functions can be used to enable iostat for partitions on devices
like md, bcache.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl9boNoQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpm++D/9oEC1RazLFXwZD7rtXUMQ0bWRmbyM77Qtq
P7wn0poSSvHT6fNyd9ytf9STlTXeJz81Gk4jTRiau1HKAhc9GudYEzYFw0baNN82
AX5dO1Gt2vww+k4XAHCM0l0k2/IOgQg8d2hDJBt68bnDIW/T1T3GORqS5Ki0dw9R
EYVFbBePZTyUIAxDWnSKtNRR3TpMrfZfi9AAUpwGkKVcCZkHD4SlrNPGKd0ckD5Z
GnHdJtWjb5mIgVHMbHgWjcIjKhC7BTrL+sCqdBJ55NvfWXZ20QoKKDSx5BWl6rMI
g/eMAJjoYJ6Ih13sjIbrC7fHZBXzPRTRfqKBq8fM6oytD0cO9ZcUfpBeqiCWOyrT
SU3C1MkkqeskDGNXhjOq8lFWeyQlUgBg0rXIDDeFNusUB3QOZa3T7oirqZlfZsOi
G7WVd4/aftr+qB8GVl1HmLCg7U3rO2q6EuJ+aJDGh07TuiFi5qaPwRzmRcykKs62
UJ15W9JaNEHdGQs5rim7evz9qLCTyQqrwF7nDFBpM8hsraPPCNbwGoUbXLACtXGR
htjr5nxEoOEJs9SKZCWl9jXzvyoMkqLp4j6soVS7cZKUJU1qxMhf68FGylbHitEq
Pe1z7dG/3Pq/zV77aGTt1J40tB43tHr3gOSQ2swwjxqvYIjlvbP4xnl6SIHvLlof
blntc17XWQ==
=J16G
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix a regression in bdev partition locking (Christoph)
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
* tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block:
block: Set same_page to false in __bio_try_merge_page if ret is false
nvme-fabrics: allow to queue requests for live queues
block: only call sched requeue_request() for scheduled requests
nvme-tcp: cancel async events before freeing event struct
nvme-rdma: cancel async events before freeing event struct
nvme-fc: cancel async events before freeing event struct
nvme: Revert: Fix controller creation races with teardown flow
block: restore a specific error code in bdev_del_partition
NVMe shares tagset between fabric queue and admin queue or between
connect_q and NS queue, so hctx_may_queue() can be called to allocate
request for these queues.
Tags can be reserved in these tagset. Before error recovery, there is
often lots of in-flight requests which can't be completed, and new
reserved request may be needed in error recovery path. However,
hctx_may_queue() can always return false because there is too many
in-flight requests which can't be completed during error handling.
Finally, nothing can proceed.
Fix this issue by always allowing reserved tag allocation in
hctx_may_queue(). This is reasonable because reserved tags are supposed
to always be available.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: David Milburn <dmilburn@redhat.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
scsi/sg.h is included more than once, Remove the one that isn't
necessary.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The test and the explaination of the patch as bellow.
Before test we added more debug code in blkg_async_bio_workfn():
int count = 0
if (bios.head && bios.head->bi_next) {
need_plug = true;
blk_start_plug(&plug);
}
while ((bio = bio_list_pop(&bios))) {
/*io_punt is a sysctl user interface to control the print*/
if(io_punt) {
printk("[%s:%d] bio start,size:%llu,%d count=%d plug?%d\n",
current->comm, current->pid, bio->bi_iter.bi_sector,
(bio->bi_iter.bi_size)>>9, count++, need_plug);
}
submit_bio(bio);
}
if (need_plug)
blk_finish_plug(&plug);
Steps that need to be set to trigger *PUNT* io before testing:
mount -t btrfs -o compress=lzo /dev/sda6 /btrfs
mount -t cgroup2 nodev /cgroup2
mkdir /cgroup2/cg3
echo "+io" > /cgroup2/cgroup.subtree_control
echo "8:0 wbps=1048576000" > /cgroup2/cg3/io.max #1000M/s
echo $$ > /cgroup2/cg3/cgroup.procs
Then use dd command to test btrfs PUNT io in current shell:
dd if=/dev/zero of=/btrfs/file bs=64K count=100000
Test hardware environment as below:
[root@localhost btrfs]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
NUMA node(s): 2
Vendor ID: GenuineIntel
With above debug code, test command and test environment, I did the
tests under 3 different system loads, which are triggered by stress:
1, Run 64 threads by command "stress -c 64 &"
[53615.975974] [kworker/u66:18:1490] bio start,size:45583056,8 count=0 plug?1
[53615.975980] [kworker/u66:18:1490] bio start,size:45583064,8 count=1 plug?1
[53615.975984] [kworker/u66:18:1490] bio start,size:45583072,8 count=2 plug?1
[53615.975987] [kworker/u66:18:1490] bio start,size:45583080,8 count=3 plug?1
[53615.975990] [kworker/u66:18:1490] bio start,size:45583088,8 count=4 plug?1
[53615.975993] [kworker/u66:18:1490] bio start,size:45583096,8 count=5 plug?1
... ...
[53615.977041] [kworker/u66:18:1490] bio start,size:45585480,8 count=303 plug?1
[53615.977044] [kworker/u66:18:1490] bio start,size:45585488,8 count=304 plug?1
[53615.977047] [kworker/u66:18:1490] bio start,size:45585496,8 count=305 plug?1
[53615.977050] [kworker/u66:18:1490] bio start,size:45585504,8 count=306 plug?1
[53615.977053] [kworker/u66:18:1490] bio start,size:45585512,8 count=307 plug?1
[53615.977056] [kworker/u66:18:1490] bio start,size:45585520,8 count=308 plug?1
[53615.977058] [kworker/u66:18:1490] bio start,size:45585528,8 count=309 plug?1
2, Run 32 threads by command "stress -c 32 &"
[50586.290521] [kworker/u66:6:32351] bio start,size:45806496,8 count=0 plug?1
[50586.290526] [kworker/u66:6:32351] bio start,size:45806504,8 count=1 plug?1
[50586.290529] [kworker/u66:6:32351] bio start,size:45806512,8 count=2 plug?1
[50586.290531] [kworker/u66:6:32351] bio start,size:45806520,8 count=3 plug?1
[50586.290533] [kworker/u66:6:32351] bio start,size:45806528,8 count=4 plug?1
[50586.290535] [kworker/u66:6:32351] bio start,size:45806536,8 count=5 plug?1
... ...
[50586.299640] [kworker/u66:5:32350] bio start,size:45808576,8 count=252 plug?1
[50586.299643] [kworker/u66:5:32350] bio start,size:45808584,8 count=253 plug?1
[50586.299646] [kworker/u66:5:32350] bio start,size:45808592,8 count=254 plug?1
[50586.299649] [kworker/u66:5:32350] bio start,size:45808600,8 count=255 plug?1
[50586.299652] [kworker/u66:5:32350] bio start,size:45808608,8 count=256 plug?1
[50586.299663] [kworker/u66:5:32350] bio start,size:45808616,8 count=257 plug?1
[50586.299665] [kworker/u66:5:32350] bio start,size:45808624,8 count=258 plug?1
[50586.299668] [kworker/u66:5:32350] bio start,size:45808632,8 count=259 plug?1
3, Don't run thread by stress
[50861.355246] [kworker/u66:19:32376] bio start,size:13544504,8 count=0 plug?0
[50861.355288] [kworker/u66:19:32376] bio start,size:13544512,8 count=0 plug?0
[50861.355322] [kworker/u66:19:32376] bio start,size:13544520,8 count=0 plug?0
[50861.355353] [kworker/u66:19:32376] bio start,size:13544528,8 count=0 plug?0
[50861.355392] [kworker/u66:19:32376] bio start,size:13544536,8 count=0 plug?0
[50861.355431] [kworker/u66:19:32376] bio start,size:13544544,8 count=0 plug?0
[50861.355468] [kworker/u66:19:32376] bio start,size:13544552,8 count=0 plug?0
[50861.355499] [kworker/u66:19:32376] bio start,size:13544560,8 count=0 plug?0
[50861.355532] [kworker/u66:19:32376] bio start,size:13544568,8 count=0 plug?0
[50861.355575] [kworker/u66:19:32376] bio start,size:13544576,8 count=0 plug?0
[50861.355618] [kworker/u66:19:32376] bio start,size:13544584,8 count=0 plug?0
[50861.355659] [kworker/u66:19:32376] bio start,size:13544592,8 count=0 plug?0
[50861.355740] [kworker/u66:0:32346] bio start,size:13544600,8 count=0 plug?1
[50861.355748] [kworker/u66:0:32346] bio start,size:13544608,8 count=1 plug?1
[50861.355962] [kworker/u66:2:32347] bio start,size:13544616,8 count=0 plug?0
[50861.356272] [kworker/u66:7:31962] bio start,size:13544624,8 count=0 plug?0
[50861.356446] [kworker/u66:7:31962] bio start,size:13544632,8 count=0 plug?0
[50861.356567] [kworker/u66:7:31962] bio start,size:13544640,8 count=0 plug?0
[50861.356707] [kworker/u66:19:32376] bio start,size:13544648,8 count=0 plug?0
[50861.356748] [kworker/u66:15:32355] bio start,size:13544656,8 count=0 plug?0
[50861.356825] [kworker/u66:17:31970] bio start,size:13544664,8 count=0 plug?0
Analysis of above 3 test results with different system load:
>From above test, we can see more and more continuous bios can be plugged
with system load increasing. When run "stress -c 64 &", 310 continuous
bios are plugged; When run "stress -c 32 &", 260 continuous bios are
plugged; When don't run stress, at most only 2 continuous bios are
plugged, in most cases, bio_list only contains one single bio.
How to explain above phenomenon:
We know, in submit_bio(), if the bio is a REQ_CGROUP_PUNT io, it will
queue a work to workqueue blkcg_punt_bio_wq. But when the workqueue is
scheduled, it depends on the system load. When system load is low, the
workqueue will be quickly scheduled, and the bio in bio_list will be
quickly processed in blkg_async_bio_workfn(), so there is less chance
that the same io submit thread can add multiple continuous bios to
bio_list before workqueue is scheduled to run. The analysis aligned with
above test "3".
When system load is high, there is some delay before the workqueue can
be scheduled to run, the higher the system load the greater the delay.
So there is more chance that the same io submit thread can add multiple
continuous bios to bio_list. Then when the workqueue is scheduled to run,
there are more continuous bios in bio_list, which will be processed in
blkg_async_bio_workfn(). The analysis aligned with above test "1" and "2".
According to test, we can get io performance improved with the patch,
especially when system load is higher. Another optimazition is to use
the plug only when bio_list contains at least 2 bios.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Like check_disk_changed, except that it does not call ->revalidate_disk
but leaves that to the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we hit the UINT_MAX limit of bio->bi_iter.bi_size and so we are anyway
not merging this page in this bio, then it make sense to make same_page
also as false before returning.
Without this patch, we hit below WARNING in iomap.
This mostly happens with very large memory system and / or after tweaking
vm dirty threshold params to delay writeback of dirty data.
WARNING: CPU: 18 PID: 5130 at fs/iomap/buffered-io.c:74 iomap_page_release+0x120/0x150
CPU: 18 PID: 5130 Comm: fio Kdump: loaded Tainted: G W 5.8.0-rc3 #6
Call Trace:
__remove_mapping+0x154/0x320 (unreliable)
iomap_releasepage+0x80/0x180
try_to_release_page+0x94/0xe0
invalidate_inode_page+0xc8/0x110
invalidate_mapping_pages+0x1dc/0x540
generic_fadvise+0x3c8/0x450
xfs_file_fadvise+0x2c/0xe0 [xfs]
vfs_fadvise+0x3c/0x60
ksys_fadvise64_64+0x68/0xe0
sys_fadvise64+0x28/0x40
system_call_exception+0xf8/0x1c0
system_call_common+0xf0/0x278
Fixes: cc90bc6842 ("block: fix "check bi_size overflow before merge"")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yang Yang reported the following crash caused by requeueing a flush
request in Kyber:
[ 2.517297] Unable to handle kernel paging request at virtual address ffffffd8071c0b00
...
[ 2.517468] pc : clear_bit+0x18/0x2c
[ 2.517502] lr : sbitmap_queue_clear+0x40/0x228
[ 2.517503] sp : ffffff800832bc60 pstate : 00c00145
...
[ 2.517599] Process ksoftirqd/5 (pid: 51, stack limit = 0xffffff8008328000)
[ 2.517602] Call trace:
[ 2.517606] clear_bit+0x18/0x2c
[ 2.517619] kyber_finish_request+0x74/0x80
[ 2.517627] blk_mq_requeue_request+0x3c/0xc0
[ 2.517637] __scsi_queue_insert+0x11c/0x148
[ 2.517640] scsi_softirq_done+0x114/0x130
[ 2.517643] blk_done_softirq+0x7c/0xb0
[ 2.517651] __do_softirq+0x208/0x3bc
[ 2.517657] run_ksoftirqd+0x34/0x60
[ 2.517663] smpboot_thread_fn+0x1c4/0x2c0
[ 2.517667] kthread+0x110/0x120
[ 2.517669] ret_from_fork+0x10/0x18
This happens because Kyber doesn't track flush requests, so
kyber_finish_request() reads a garbage domain token. Only call the
scheduler's requeue_request() hook if RQF_ELVPRIV is set (like we do for
the finish_request() hook in blk_mq_free_request()). Now that we're
handling it in blk-mq, also remove the check from BFQ.
Reported-by: Yang Yang <yang.yang@vivo.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to the naming used by the other entries so that we can use the
QUEUE_RW_ENTRY helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add two helpers macros to avoid boilerplate code for the queue sysfs
entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mdadm relies on the fact that deleting an invalid partition returns
-ENXIO or -ENOTTY to detect if a block device is a partition or a
whole device.
Fixes: 08fc1ab6d7 ("block: fix locking in bdev_del_partition")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we usually free the hctx->sched_data by e->type->ops.exit_hctx(),
and no users will use blk_mq_sched_free_hctx_data() function.
Remove it.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Discarding blocks and buffers under a mounted filesystem is hardly
anything admin wants to do. Usually it will confuse the filesystem and
sometimes the loss of buffer_head state (including b_private field) can
even cause crashes like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 4 PID: 203778 Comm: jbd2/dm-3-8 Kdump: loaded Tainted: G O --------- - - 4.18.0-147.5.0.5.h126.eulerosv2r9.x86_64 #1
Hardware name: Huawei RH2288H V3/BC11HGSA0, BIOS 1.57 08/11/2015
RIP: 0010:jbd2_journal_grab_journal_head+0x1b/0x40 [jbd2]
...
Call Trace:
__jbd2_journal_insert_checkpoint+0x23/0x70 [jbd2]
jbd2_journal_commit_transaction+0x155f/0x1b60 [jbd2]
kjournald2+0xbd/0x270 [jbd2]
So if we don't have block device open with O_EXCL already, claim the
block device while we truncate buffer cache. This makes sure any
exclusive block device user (such as filesystem) cannot operate on the
device while we are discarding buffer cache.
Reported-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: fix !CONFIG_BLOCK error in truncate_bdev_range()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=8fvz
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
High CPU utilization on "native_queued_spin_lock_slowpath" due to lock
contention is possible for mq-deadline and bfq IO schedulers
when nr_hw_queues is more than one.
It is because kblockd work queue can submit IO from all online CPUs
(through blk_mq_run_hw_queues()) even though only one hctx has pending
commands.
The elevator callback .has_work for mq-deadline and bfq scheduler considers
pending work if there are any IOs on request queue but it does not account
hctx context.
Add a per-hctx 'elevator_queued' count to the hctx to avoid triggering
the elevator even though there are no requests queued.
[jpg: Relocated atomic_dec() in dd_dispatch_request(), update commit message per Kashyap]
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For when using a shared sbitmap, no longer should the number of active
request queues per hctx be relied on for when judging how to share the tag
bitmap.
Instead maintain the number of active request queues per tag_set, and make
the judgement based on that.
Originally-from: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The per-hctx nr_active value can no longer be used to fairly assign a share
of tag depth per request queue for when using a shared sbitmap, as it does
not consider that the tags are shared tags over all hctx's.
For this case, record the nr_active_requests per request_queue, and make
the judgement based on that value.
Co-developed-with: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-mq.h and blk-mq-tag.h include on each other, which is less than ideal.
Locate hctx_may_queue() to blk-mq.h, as it is not really tag specific code.
In this way, we can drop the blk-mq-tag.h include of blk-mq.h
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some SCSI HBAs (such as HPSA, megaraid, mpt3sas, hisi_sas_v3 ..) support
multiple reply queues with single hostwide tags.
In addition, these drivers want to use interrupt assignment in
pci_alloc_irq_vectors(PCI_IRQ_AFFINITY). However, as discussed in [0],
CPU hotplug may cause in-flight IO completion to not be serviced when an
interrupt is shutdown. That problem is solved in commit bf0beec060
("blk-mq: drain I/O when all CPUs in a hctx are offline").
However, to take advantage of that blk-mq feature, the HBA HW queuess are
required to be mapped to that of the blk-mq hctx's; to do that, the HBA HW
queues need to be exposed to the upper layer.
In making that transition, the per-SCSI command request tags are no
longer unique per Scsi host - they are just unique per hctx. As such, the
HBA LLDD would have to generate this tag internally, which has a certain
performance overhead.
However another problem is that blk-mq assumes the host may accept
(Scsi_host.can_queue * #hw queue) commands. In commit 6eb045e092 ("scsi:
core: avoid host-wide host_busy counter for scsi_mq"), the Scsi host busy
counter was removed, which would stop the LLDD being sent more than
.can_queue commands; however, it should still be ensured that the block
layer does not issue more than .can_queue commands to the Scsi host.
To solve this problem, introduce a shared sbitmap per blk_mq_tag_set,
which may be requested at init time.
New flag BLK_MQ_F_TAG_HCTX_SHARED should be set when requesting the
tagset to indicate whether the shared sbitmap should be used.
Even when BLK_MQ_F_TAG_HCTX_SHARED is set, a full set of tags and requests
are still allocated per hctx; the reason for this is that if tags and
requests were only allocated for a single hctx - like hctx0 - it may break
block drivers which expect a request be associated with a specific hctx,
i.e. not always hctx0. This will introduce extra memory usage.
This change is based on work originally from Ming Lei in [1] and from
Bart's suggestion in [2].
[0] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/
[1] https://lore.kernel.org/linux-block/20190531022801.10003-1-ming.lei@redhat.com/
[2] https://lore.kernel.org/linux-block/ff77beff-5fd9-9f05-12b6-826922bace1f@huawei.com/T/#m3db0a602f095cbcbff27e9c884d6b4ae826144be
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce pointers for the blk_mq_tags regular and reserved bitmap tags,
with the goal of later being able to use a common shared tag bitmap across
all HW contexts in a set.
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass hctx/tagset flags argument down to blk_mq_init_tags() and
blk_mq_free_tags() for selective init/free.
For now, make it include the alloc policy flag, which can be evaluated
when needed (in blk_mq_init_tags()).
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the tags are allocated in blk_mq_init_tags(), it's better practice
to free in that same function upon error, rather than a callee which is to
init the bitmap tags (blk_mq_init_tags()).
[jpg: Split from an earlier patch with a new commit message]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function does not set the depth, but rather transitions from
shared to non-shared queues and vice versa.
So rename it to blk_mq_update_tag_set_shared() to better reflect
its purpose.
[jpg: take out some unrelated changes in blk_mq_init_bitmap_tags()]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BLK_MQ_F_TAG_SHARED actually means that tags is shared among request
queues, all of which should belong to LUNs attached to same HBA.
So rename it to make the point explicitly.
[jpg: rebase a few times, add rnbd-clt.c change]
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only virtio_blk and xen-blkfront set the revalidate argument to true,
and both do not implement the ->revalidate_disk method. So switch
to the helper that just updates the size instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bd_invalidate with a new BDEV_NEED_PART_SCAN flag in a bd_flags
variable to better describe the condition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove a duplicative condition to remove below cppcheck warnings:
"warning: Redundant condition: sched_allow_merge. '!A || (A && B)' is
equivalent to '!A || B' [redundantCondition]"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If WRITE_ZERO/WRITE_SAME operation is not supported by the storage,
blk_cloned_rq_check_limits() will return IO error which will cause
device-mapper to fail the paths.
Instead, if the queue limit is set to 0, return BLK_STS_NOTSUPP.
BLK_STS_NOTSUPP will be ignored by device-mapper and will not fail the
paths.
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ritika Srivastava <ritika.srivastava@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
