Driver calls request_firmware() whenever the device is opened for the
first time. As the device gets opened and closed, dev->num_inst == 1
is true several times. This is not necessary since the firmware is saved
in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
the request_firmware() to dev->fw_buf.
fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
there is no need to keep requesting firmware and copying it to fw_buf.
This might have been overlooked when changes are made to free fw_buf from
the device release interface s5p_mfc_release().
Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
Change _probe() to load firmware once fw_buf has been allocated.
s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
hardware which is the step where firmware is written to the device.
This addresses the mfc_mutex contention due to repeated request_firmware()
calls from open() in the following circular locking warning:
[ 552.194115] qtdemux0:sink/2710 is trying to acquire lock:
[ 552.199488] (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 552.207459]
but task is already holding lock:
[ 552.213264] (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 552.220284]
which lock already depends on the new lock.
[ 552.228429]
the existing dependency chain (in reverse order) is:
[ 552.235881]
-> #2 (&mm->mmap_sem){++++}:
[ 552.241259] __might_fault+0x80/0xb0
[ 552.245331] filldir64+0xc0/0x2f8
[ 552.249144] call_filldir+0xb0/0x14c
[ 552.253214] ext4_readdir+0x768/0x90c
[ 552.257374] iterate_dir+0x74/0x168
[ 552.261360] SyS_getdents64+0x7c/0x1a0
[ 552.265608] ret_fast_syscall+0x0/0x28
[ 552.269850]
-> #1 (&type->i_mutex_dir_key#2){++++}:
[ 552.276180] down_read+0x48/0x90
[ 552.279904] lookup_slow+0x74/0x178
[ 552.283889] walk_component+0x1a4/0x2e4
[ 552.288222] link_path_walk+0x174/0x4a0
[ 552.292555] path_openat+0x68/0x944
[ 552.296541] do_filp_open+0x60/0xc4
[ 552.300528] file_open_name+0xe4/0x114
[ 552.304772] filp_open+0x28/0x48
[ 552.308499] kernel_read_file_from_path+0x30/0x78
[ 552.313700] _request_firmware+0x3ec/0x78c
[ 552.318291] request_firmware+0x3c/0x54
[ 552.322642] s5p_mfc_load_firmware+0x54/0x150 [s5p_mfc]
[ 552.328358] s5p_mfc_open+0x4e4/0x550 [s5p_mfc]
[ 552.333394] v4l2_open+0xa0/0x104 [videodev]
[ 552.338137] chrdev_open+0xa4/0x18c
[ 552.342121] do_dentry_open+0x208/0x310
[ 552.346454] path_openat+0x28c/0x944
[ 552.350526] do_filp_open+0x60/0xc4
[ 552.354512] do_sys_open+0x118/0x1c8
[ 552.358586] ret_fast_syscall+0x0/0x28
[ 552.362830]
-> #0 (&dev->mfc_mutex){+.+.}:
-> #0 (&dev->mfc_mutex){+.+.}:
[ 552.368379] lock_acquire+0x6c/0x88
[ 552.372364] __mutex_lock+0x68/0xa34
[ 552.376437] mutex_lock_interruptible_nested+0x1c/0x24
[ 552.382086] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 552.386939] v4l2_mmap+0x54/0x88 [videodev]
[ 552.391601] mmap_region+0x3a8/0x638
[ 552.395673] do_mmap+0x330/0x3a4
[ 552.399400] vm_mmap_pgoff+0x90/0xb8
[ 552.403472] SyS_mmap_pgoff+0x90/0xc0
[ 552.407632] ret_fast_syscall+0x0/0x28
[ 552.411876]
other info that might help us debug this:
[ 552.419848] Chain exists of:
&dev->mfc_mutex --> &type->i_mutex_dir_key#2 --> &mm->mmap_sem
[ 552.431200] Possible unsafe locking scenario:
[ 552.437092] CPU0 CPU1
[ 552.441598] ---- ----
[ 552.446104] lock(&mm->mmap_sem);
[ 552.449484] lock(&type->i_mutex_dir_key#2);
[ 552.456329] lock(&mm->mmap_sem);
[ 552.462222] lock(&dev->mfc_mutex);
[ 552.465775]
*** DEADLOCK ***
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
s5p_mfc_load_firmware() will not get called if fw_buf.virt allocation
fails. The allocation happens very early on in the probe routine and
probe fails if allocation fails.
There is no need to check if it is null in s5p_mfc_load_firmware().
Remove the check.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Setting both V4L2_CAP_VIDEO_CAPTURE_MPLANE and V4L2_CAP_VIDEO_OUTPUT_MPLANE
for mem2mem video nodes is obsolete since commit f0476a83d6 ("[media]
V4L: Add capability flags for memory-to-memory devices"). It was enough
time to adapt all users to the new flags, so drop the legacy caps for now
to match other mem2mem drivers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Setting both V4L2_CAP_VIDEO_CAPTURE_MPLANE and V4L2_CAP_VIDEO_OUTPUT_MPLANE
for mem2mem video nodes is obsolete since commit f0476a83d6 ("[media]
V4L: Add capability flags for memory-to-memory devices"). It was enough
time to adapt all users to the new flags, so drop the legacy caps for now
to match other mem2mem drivers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We copy the subdev frame format from a partially initialized
structure, which is not entirely well-defined. Older compilers
like gcc-4.4 can copy uninitialized stack data here and warn
about it:
drivers/media/platform/exynos4-is/fimc-isp.c: In function 'fimc_isp_subdev_open':
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.reserved[10u]' may be used uninitialized in this function
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.reserved[9u]' may be used uninitialized in this function
...
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.reserved[0u]' may be used uninitialized in this function
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.xfer_func' may be used uninitialized in this function
On newer compilers, only the initialized fields get copied, but
we should not rely on that, so this changes the code to zero-out
the remaining fields first.
Fixes: 9a761e4368 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch fixes the menu_skip_mask field initialization and
addresses a following issue found by the SVACE static analysis:
* NO_EFFECT.SELF: assignment to self in expression 'cfg.menu_skip_mask = cfg.menu_skip_mask'
No effect at drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:2083
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The driver may sleep under a spinlock.
The function call path is:
bdisp_device_run (acquire the spinlock)
bdisp_hw_update
bdisp_hw_save_request
devm_kzalloc(GFP_KERNEL) --> may sleep
To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool(DSAC) and checked by my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently videobuf2-dma-sg checks for dma direction for
every single page and videobuf2-dc lacks any dma direction
checks and calls set_page_dirty_lock unconditionally.
Thus unify and align the invocations of set_page_dirty_lock
for videobuf2-dc, videobuf2-sg memory allocators with
videobuf2-vmalloc, i.e. the pattern used in vmalloc has been
copied to dc and dma-sg.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The pvrusb2 code appears to have a some old workaround code for xawtv that causes a
WARN() due to an unrecognized pixelformat 0 in v4l2_ioctl.c.
Since all other MPEG drivers fill this in correctly, it is a safe assumption that
this particular problem no longer exists.
While I'm at it, clean up the code a bit.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
V4L2_BUF_FLAG_LAST is a signal from the driver to userspace for buffers
on the capture queue. When userspace queues back a capture buffer with
the flag set, we should clear it.
Otherwise, if userspace restarts streaming after EOS, without
reallocating the buffers, mem2mem devices will erroneously signal EOS
prematurely, as soon as the already flagged buffer is dequeued.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The mvcol buffer needs to be placed behind the chroma plane(s) when
decoding MPEG-4, same as for the h.264 decoder. Use the real offset
with the required rounding.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The MPEG-4 decoder mvcol buffer was registered, but its size not added
to a frame buffer allocation. This could cause the decoder to write past
the end of the allocated buffer for large frame sizes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We need internal frames to be rounded up to full macroblocks for MPEG-4
decoding as well.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Since bytesperline always fulfills VDOA width requirements, detile the
whole buffer instead of limiting to visible width. This stops TRY_FMT
from returning -EINVAL for YUYV capture buffers that are not a multiple
of 16 wide.
An alternative would be to always round up width to stride, as we report
the valid image rectange via G_SELECTION (V4L2_SEL_TGT_COMPOSE_DEFAULT),
but that would require all applications to handle the compose default
rectangle properly.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The current driver implementation expects at least one buffer on
all queues to start streaming. Properly signal this to the vb2
core, to avoid confusion when streamon is racing with qbuf.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
pxa_camera_probe() was not calling pxa_camera_deactivate(),
responsible to call clk_disable_unprepare(), on the failure path. This
was leading to unbalancing source clock.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
videobuf2 core reports an error when not all buffers have been returned
to the framework:
drivers/media/v4l2-core/videobuf2-core.c:1651
WARN_ON(atomic_read(&q->owned_by_drv_count))
Fix this returning all buffers currently in capture queue.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The color structs right now are just "color" and "color16".
That may lead into conflicts, and don't define precisely what
they meant. As those are used by two drivers (vivid and vimc),
this is even on a somewhat public header!
So rename them to:
color -> tpg_rbg_color8
color16 -> tpg_rbg_color16
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The v4l2-tpg*.h headers are meant to be used only internally by
vivid and vimc. There's no sense keeping them together with the
V4L2 kAPI headers. Also, one header includes the other as they're
meant to be used together. So, merge them.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
In the past, the same I2C address were used on multiple places.
After I2C rebinding changes, this is no longer needed. So, we
can just get rid of this header, placing the I2C address where
they belong, e. g. either at bttv driver or at tvtuner.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Using enums makes easier to document, as it can use kernel-doc
markups. It also allows cross-referencing, with increases the
kAPI readability.
Please notice that now cx88_querycap() has to have a default for
the VFL type, as there are more types than supported by the driver.
Acked-By: Mike Isely <isely@pobox.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several helper functions that aren't documented.
Document them.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This struct is there just two store two arguments of
v4l2_find_nearest_format(). The other two arguments are passed
as parameter.
IMHO, there isn't much sense on doing that, and that will just
add one more struct to document ;)
So, let's get rid of the struct, passing the parameters directly.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are some nested structs on this header, with aren't
properly document them.
This should solve some warnings after the addition of
a patche at kernel-doc adding support for nested structs/unions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are some nested structs on this header, with aren't
properly document them.
This should solve some warnings after the addition of
a patche at kernel-doc adding support for nested structs/unions.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A typical code fragment was copied across many dvb-frontend drivers and
causes large stack frames when built with with CONFIG_KASAN on gcc-5/6/7:
drivers/media/dvb-frontends/cxd2841er.c:3225:1: error: the frame size of 3992 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/cxd2841er.c:3404:1: error: the frame size of 3136 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv0367.c:3143:1: error: the frame size of 4016 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:3430:1: error: the frame size of 5312 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:4248:1: error: the frame size of 4872 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
gcc-8 now solves this by consolidating the stack slots for the argument
variables, but on older compilers we can get the same behavior by taking
the pointer of a local variable rather than the inline function argument.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:
drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Rename soc_camera to pxa_camera as this has no longer anything to do with the old
soc_camera driver/framework. It's confusing when grepping on soc_camera.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart.
Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem.
Signed-off-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
While the failure handling in dvb_input_attach() has been improved lately
so any tuner failure won't result in demod driver modules with a
usecount > 0 anymore (thus requiring rmmod -f), there's still an issue
with stv090x and stv0910 based tuner modules, in that LNB driver attach
failures leave an attached demod frontend driver behind which have a
usecount of > 0 in this failure case, due to them not being detached/
released. Fix this by detaching the demod frontends if the LNB driver
fails.
Richard tested and verified the changes with STV0910 hardware, thus adding
his Tested-by.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Tested-by: Richard Scobie <rascobie@slingshot.co.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
With CONFIG_KASAN enabled, we get a relatively large stack frame in one function
drivers/media/tuners/tda8290.c: In function 'tda8290_set_params':
drivers/media/tuners/tda8290.c:310:1: warning: the frame size of 1520 bytes is larger than 1024 bytes [-Wframe-larger-than=]
With CONFIG_KASAN_EXTRA this goes up to
drivers/media/tuners/tda8290.c: In function 'tda8290_set_params':
drivers/media/tuners/tda8290.c:310:1: error: the frame size of 3200 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
We can significantly reduce this by marking local arrays as 'static const', and
this should result in better compiled code for everyone.
[mchehab@s-opensource.com: fix a trivial merge conflict]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
CEC autorepeat is different than other protocols. Autorepeat is triggered
by the first repeated user control pressed CEC message, rather than a
fixed REP_DELAY.
This change also does away with the KEY_UP event directly after the first
KEY_DOWN event, which was used to stop autorepeat from starting.
See commit a9a249a2c9 ("media: cec: fix remote control passthrough")
for the original change.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Another device with the 0xffdc device id, this one with 0x30 in the
config byte. Its an iMON VFD + iMON IR (it does not understand rc6).
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch changes the 32-bit time type (timeval) to the 64-bit one
(ktime_t), since 32-bit time types will break in the year 2038.
I use ktime_t instead of all uses of timeval in imon.c
This patch also changes do_gettimeofday() to ktime_get() accordingly,
since ktime_get returns a ktime_t, but do_gettimeofday returns a
struct timeval, and the other reason is that ktime_get() uses
the monotonic clock.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Once rc_unregister_device() has been called, no driver function
should be called.
This prevents some nasty race conditions with an ioctl calls
driver functions when the driver specific data has been freed.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This makes it possible for lircd to read from a lirc chardev, and not
keep it busy.
Note that this changes the default for timeout reports to on. lircd
already enables timeout reports when it opens a lirc device, leaving
them on until the next reboot.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This removes the need for include/media/lirc.h, which just includes
the uapi file.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Since removing the lirc kapi, ir-lirc-codec.c only contains lirc fops
so the file name is no longer correct. By moving its content into
lirc_dev.c the ugly extern struct lirc_fops is not longer needed,
and everything lirc related is in one file.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that the lirc interface supports scancodes, RC scancode devices
can also have a lirc device. The only receiving feature they will have
enabled is LIRC_CAN_REC_SCANCODE.
Note that CEC devices have no lirc device, since they can be controlled
from their /dev/cecN chardev.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The lirc device should get lirc repeats whether there is a keymap
match or not.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This implements LIRC_MODE_SCANCODE reading from the lirc device. The
scancode can be read from the input device too, but with this interface
you get the rc protocol, keycode, toggle and repeat status in addition
to just the scancode.
int main()
{
int fd, mode, rc;
fd = open("/dev/lirc0", O_RDWR);
mode = LIRC_MODE_SCANCODE;
if (ioctl(fd, LIRC_SET_REC_MODE, &mode)) {
// kernel too old or lirc does not support transmit
}
struct lirc_scancode scancode;
while (read(fd, &scancode, sizeof(scancode)) == sizeof(scancode)) {
printf("protocol:%d scancode:0x%x toggle:%d repeat:%d\n",
scancode.rc_proto, scancode.scancode,
!!(scancode.flags & LIRC_SCANCODE_FLAG_TOGGLE),
!!(scancode.flags & LIRC_SCANCODE_FLAG_REPEAT));
}
close(fd);
}
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
rc-core has replaced the lirc kapi many years ago, and now with the last
driver ported to rc-core, we can finally remove it.
Note this has no effect on userspace.
All future IR drivers should use the rc-core api.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Replace the generic kernel lirc api with ones which use rc-core, further
reducing the lirc_dev members.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If a lirc chardev is held open after a device is unplugged, rc_close()
will be called after rc_unregister_device(). The driver is not expecting
any calls at this point, and the iguanair driver causes an oops in
this scenario.
rc_open() can be called when the device is removed too, by calling open
on the chardev whilst the device is being removed.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is done to further remove the lirc kernel api. Ensure that every
fops checks for this.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Since the only mode lirc devices can handle is raw IR, handle this
in a plain kfifo.
Remove lirc_buffer since this is no longer needed.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Calculate lirc features when necessary, and add LIRC_{S,G}ET_REC_MODE
cases to ir_lirc_ioctl.
This makes lirc_dev_fop_ioctl() unnecessary since all cases are
already handled by ir_lirc_ioctl().
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
