Commit Graph

28181 Commits

Author SHA1 Message Date
Linus Torvalds
51a26ae7a1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Just a small pile of fixes"

 1) Fix race conditions in IP fragmentation LRU list handling, from
    Konstantin Khlebnikov.

 2) vfree() is no longer verboten in interrupts, so deferring is
    pointless, from Al Viro.

 3) Conversion from mutex to semaphore in netpoll left trylock test
    inverted, caught by Dan Carpenter.

 4) 3c59x uses wrong base address when releasing regions, from Sergei
    Shtylyov.

 5) Bounds checking in TIPC from Dan Carpenter.

 6) Fastopen cookies should not be expired as aggressively as other TCP
    metrics.  From Eric Dumazet.

 7) Fix retrieval of MAC address in ibmveth, from Ben Herrenschmidt.

 8) Don't use "u16" in virtio user headers, from Stephen Hemminger

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tipc: potential divide by zero in tipc_link_recv_fragment()
  tipc: add a bounds check in link_recv_changeover_msg()
  net/usb: new driver for RTL8152
  3c59x: fix freeing nonexistent resource on driver unload
  netpoll: inverted down_trylock() test
  rps_dev_flow_table_release(): no need to delay vfree()
  fib_trie: no need to delay vfree()
  net: frag, fix race conditions in LRU list maintenance
  tcp: do not expire TCP fastopen cookies
  net/eth/ibmveth: Fixup retrieval of MAC address
  virtio: don't expose u16 in userspace api
2013-05-06 15:51:10 -07:00
Dan Carpenter
6bf15191f6 tipc: potential divide by zero in tipc_link_recv_fragment()
The worry here is that fragm_sz could be zero since it comes from
skb->data.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06 16:16:52 -04:00
Dan Carpenter
cb4b102f0a tipc: add a bounds check in link_recv_changeover_msg()
The bearer_id here comes from skb->data and it can be a number from 0 to
7.  The problem is that the ->links[] array has only 2 elements so I
have added a range check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06 16:16:52 -04:00
Linus Torvalds
91f8575685 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph changes from Alex Elder:
 "This is a big pull.

  Most of it is culmination of Alex's work to implement RBD image
  layering, which is now complete (yay!).

  There is also some work from Yan to fix i_mutex behavior surrounding
  writes in cephfs, a sync write fix, a fix for RBD images that get
  resized while they are mapped, and a few patches from me that resolve
  annoying auth warnings and fix several bugs in the ceph auth code."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (254 commits)
  rbd: fix image request leak on parent read
  libceph: use slab cache for osd client requests
  libceph: allocate ceph message data with a slab allocator
  libceph: allocate ceph messages with a slab allocator
  rbd: allocate image object names with a slab allocator
  rbd: allocate object requests with a slab allocator
  rbd: allocate name separate from obj_request
  rbd: allocate image requests with a slab allocator
  rbd: use binary search for snapshot lookup
  rbd: clear EXISTS flag if mapped snapshot disappears
  rbd: kill off the snapshot list
  rbd: define rbd_snap_size() and rbd_snap_features()
  rbd: use snap_id not index to look up snap info
  rbd: look up snapshot name in names buffer
  rbd: drop obj_request->version
  rbd: drop rbd_obj_method_sync() version parameter
  rbd: more version parameter removal
  rbd: get rid of some version parameters
  rbd: stop tracking header object version
  rbd: snap names are pointer to constant data
  ...
2013-05-06 13:11:19 -07:00
Dan Carpenter
a3dbbc2bab netpoll: inverted down_trylock() test
The return value is reversed from mutex_trylock().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06 11:06:52 -04:00
Al Viro
243198d09f rps_dev_flow_table_release(): no need to delay vfree()
The same story as with fib_trie patch - vfree() from RCU callbacks
is legitimate now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06 11:06:51 -04:00
Al Viro
0020356355 fib_trie: no need to delay vfree()
Now that vfree() can be called from interrupt contexts, there's no
need to play games with schedule_work() to escape calling vfree()
from RCU callbacks.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06 11:06:51 -04:00
Konstantin Khlebnikov
b56141ab34 net: frag, fix race conditions in LRU list maintenance
This patch fixes race between inet_frag_lru_move() and inet_frag_lru_add()
which was introduced in commit 3ef0eb0db4
("net: frag, move LRU list maintenance outside of rwlock")

One cpu already added new fragment queue into hash but not into LRU.
Other cpu found it in hash and tries to move it to the end of LRU.
This leads to NULL pointer dereference inside of list_move_tail().

Another possible race condition is between inet_frag_lru_move() and
inet_frag_lru_del(): move can happens after deletion.

This patch initializes LRU list head before adding fragment into hash and
inet_frag_lru_move() doesn't touches it if it's empty.

I saw this kernel oops two times in a couple of days.

[119482.128853] BUG: unable to handle kernel NULL pointer dereference at           (null)
[119482.132693] IP: [<ffffffff812ede89>] __list_del_entry+0x29/0xd0
[119482.136456] PGD 2148f6067 PUD 215ab9067 PMD 0
[119482.140221] Oops: 0000 [#1] SMP
[119482.144008] Modules linked in: vfat msdos fat 8021q fuse nfsd auth_rpcgss nfs_acl nfs lockd sunrpc ppp_async ppp_generic bridge slhc stp llc w83627ehf hwmon_vid snd_hda_codec_hdmi snd_hda_codec_realtek kvm_amd k10temp kvm snd_hda_intel snd_hda_codec edac_core radeon snd_hwdep ath9k snd_pcm ath9k_common snd_page_alloc ath9k_hw snd_timer snd soundcore drm_kms_helper ath ttm r8169 mii
[119482.152692] CPU 3
[119482.152721] Pid: 20, comm: ksoftirqd/3 Not tainted 3.9.0-zurg-00001-g9f95269 #132 To Be Filled By O.E.M. To Be Filled By O.E.M./RS880D
[119482.161478] RIP: 0010:[<ffffffff812ede89>]  [<ffffffff812ede89>] __list_del_entry+0x29/0xd0
[119482.166004] RSP: 0018:ffff880216d5db58  EFLAGS: 00010207
[119482.170568] RAX: 0000000000000000 RBX: ffff88020882b9c0 RCX: dead000000200200
[119482.175189] RDX: 0000000000000000 RSI: 0000000000000880 RDI: ffff88020882ba00
[119482.179860] RBP: ffff880216d5db58 R08: ffffffff8155c7f0 R09: 0000000000000014
[119482.184570] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88020882ba00
[119482.189337] R13: ffffffff81c8d780 R14: ffff880204357f00 R15: 00000000000005a0
[119482.194140] FS:  00007f58124dc700(0000) GS:ffff88021fcc0000(0000) knlGS:0000000000000000
[119482.198928] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[119482.203711] CR2: 0000000000000000 CR3: 00000002155f0000 CR4: 00000000000007e0
[119482.208533] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[119482.213371] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[119482.218221] Process ksoftirqd/3 (pid: 20, threadinfo ffff880216d5c000, task ffff880216d3a9a0)
[119482.223113] Stack:
[119482.228004]  ffff880216d5dbd8 ffffffff8155dcda 0000000000000000 ffff000200000001
[119482.233038]  ffff8802153c1f00 ffff880000289440 ffff880200000014 ffff88007bc72000
[119482.238083]  00000000000079d5 ffff88007bc72f44 ffffffff00000002 ffff880204357f00
[119482.243090] Call Trace:
[119482.248009]  [<ffffffff8155dcda>] ip_defrag+0x8fa/0xd10
[119482.252921]  [<ffffffff815a8013>] ipv4_conntrack_defrag+0x83/0xe0
[119482.257803]  [<ffffffff8154485b>] nf_iterate+0x8b/0xa0
[119482.262658]  [<ffffffff8155c7f0>] ? inet_del_offload+0x40/0x40
[119482.267527]  [<ffffffff815448e4>] nf_hook_slow+0x74/0x130
[119482.272412]  [<ffffffff8155c7f0>] ? inet_del_offload+0x40/0x40
[119482.277302]  [<ffffffff8155d068>] ip_rcv+0x268/0x320
[119482.282147]  [<ffffffff81519992>] __netif_receive_skb_core+0x612/0x7e0
[119482.286998]  [<ffffffff81519b78>] __netif_receive_skb+0x18/0x60
[119482.291826]  [<ffffffff8151a650>] process_backlog+0xa0/0x160
[119482.296648]  [<ffffffff81519f29>] net_rx_action+0x139/0x220
[119482.301403]  [<ffffffff81053707>] __do_softirq+0xe7/0x220
[119482.306103]  [<ffffffff81053868>] run_ksoftirqd+0x28/0x40
[119482.310809]  [<ffffffff81074f5f>] smpboot_thread_fn+0xff/0x1a0
[119482.315515]  [<ffffffff81074e60>] ? lg_local_lock_cpu+0x40/0x40
[119482.320219]  [<ffffffff8106d870>] kthread+0xc0/0xd0
[119482.324858]  [<ffffffff8106d7b0>] ? insert_kthread_work+0x40/0x40
[119482.329460]  [<ffffffff816c32dc>] ret_from_fork+0x7c/0xb0
[119482.334057]  [<ffffffff8106d7b0>] ? insert_kthread_work+0x40/0x40
[119482.338661] Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08
[119482.343787] RIP  [<ffffffff812ede89>] __list_del_entry+0x29/0xd0
[119482.348675]  RSP <ffff880216d5db58>
[119482.353493] CR2: 0000000000000000

Oops happened on this path:
ip_defrag() -> ip_frag_queue() -> inet_frag_lru_move() -> list_move_tail() -> __list_del_entry()

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06 11:06:51 -04:00
Eric Dumazet
efeaa5550e tcp: do not expire TCP fastopen cookies
TCP metric cache expires entries after one hour.

This probably make sense for TCP RTT/RTTVAR/CWND, but not
for TCP fastopen cookies.

Its better to try previous cookie. If it appears to be obsolete,
server will send us new cookie anyway.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-05 16:58:02 -04:00
Linus Torvalds
1aaf6d3d3d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Several routines do not use netdev_features_t to hold such bitmasks,
    fixes from Patrick McHardy and Bjørn Mork.

 2) Update cpsw IRQ software state and the actual HW irq enabling in the
    correct order.  From Mugunthan V N.

 3) When sending tipc packets to multiple bearers, we have to make
    copies of the SKB rather than just giving the original SKB directly.
    Fix from Gerlando Falauto.

 4) Fix race with bridging topology change timer, from Stephen
    Hemminger.

 5) Fix TCPv6 segmentation handling in GRE and VXLAN, from Pravin B
    Shelar.

 6) Endian bug in USB pegasus driver, from Dan Carpenter.

 7) Fix crashes on MTU reduction in USB asix driver, from Holger
    Eitzenberger.

 8) Don't allow the kernel to BUG() just because the user puts some crap
    in an AF_PACKET mmap() ring descriptor.  Fix from Daniel Borkmann.

 9) Don't use variable sized arrays on the stack in xen-netback, from
    Wei Liu.

10) Fix stats reporting and an unbalanced napi_disable() in be2net
    driver.  From Somnath Kotur and Ajit Khaparde.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
  cxgb4: fix error recovery when t4_fw_hello returns a positive value
  sky2: Fix crash on receiving VLAN frames
  packet: tpacket_v3: do not trigger bug() on wrong header status
  asix: fix BUG in receive path when lowering MTU
  net: qmi_wwan: Add Telewell TW-LTE 4G
  usbnet: pegasus: endian bug in write_mii_word()
  vxlan: Fix TCPv6 segmentation.
  gre: Fix GREv4 TCPv6 segmentation.
  bridge: fix race with topology change timer
  tipc: pskb_copy() buffers when sending on more than one bearer
  tipc: tipc_bcbearer_send(): simplify bearer selection
  tipc: cosmetic: clean up comments and break a long line
  drivers: net: cpsw: irq not disabled in cpsw isr in particular sequence
  xen-netback: better names for thresholds
  xen-netback: avoid allocating variable size array on stack
  xen-netback: remove redundent parameter in netbk_count_requests
  be2net: Fix to fail probe if MSI-X enable fails for a VF
  be2net: avoid napi_disable() when it has not been enabled
  be2net: Fix firmware download for Lancer
  be2net: Fix to receive Multicast Packets when Promiscuous mode is enabled on certain devices
  ...
2013-05-04 20:10:04 -07:00
Daniel Borkmann
8da3056c04 packet: tpacket_v3: do not trigger bug() on wrong header status
Jakub reported that it is fairly easy to trigger the BUG() macro
from user space with TPACKET_V3's RX_RING by just giving a wrong
header status flag. We already had a similar situation in commit
7f5c3e3a80 (``af_packet: remove BUG statement in
tpacket_destruct_skb'') where this was the case in the TX_RING
side that could be triggered from user space. So really, don't use
BUG() or BUG_ON() unless there's really no way out, and i.e.
don't use it for consistency checking when there's user space
involved, no excuses, especially not if you're slapping the user
with WARN + dump_stack + BUG all at once. The two functions are
of concern:

  prb_retire_current_block() [when block status != TP_STATUS_KERNEL]
  prb_open_block() [when block_status != TP_STATUS_KERNEL]

Calls to prb_open_block() are guarded by ealier checks if block_status
is really TP_STATUS_KERNEL (racy!), but the first one BUG() is easily
triggable from user space. System behaves still stable after they are
removed. Also remove that yoda condition entirely, since it's already
guarded.

Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:10:33 -04:00
Pravin B Shelar
0d05535d41 vxlan: Fix TCPv6 segmentation.
This patch set correct skb->protocol so that inner packet can
lookup correct gso handler.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:08:59 -04:00
Pravin B Shelar
9b3eb5edf3 gre: Fix GREv4 TCPv6 segmentation.
For ipv6 traffic, GRE can generate packet with strange GSO
bits, e.g. ipv4 packet with SKB_GSO_TCPV6 flag set.  Therefore
following patch relaxes check in inet gso handler to allow
such packet for segmentation.
This patch also fixes wrong skb->protocol set that was done in
gre_gso_segment() handler.

Reported-by: Steinar H. Gunderson <sesse@google.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:08:58 -04:00
stephen hemminger
83401eb499 bridge: fix race with topology change timer
A bridge should only send topology change notice if it is not
the root bridge. It is possible for message age timer to elect itself
as a new root bridge, and still have a topology change timer running
but waiting for bridge lock on other CPU.

Solve the race by checking if we are root bridge before continuing.
This was the root cause of the cases where br_send_tcn_bpdu would OOPS.

Reported-by: JerryKang <jerry.kang@samsung.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:08:58 -04:00
Gerlando Falauto
488fc9af82 tipc: pskb_copy() buffers when sending on more than one bearer
When sending packets, TIPC bearers use skb_clone() before writing their
hardware header. This will however NOT copy the data buffer.
So when the same packet is sent over multiple bearers (to reach multiple
nodes), the same socket buffer data will be treated by multiple
tipc_media drivers which will write their own hardware header through
dev_hard_header().
Most of the time this is not a problem, because by the time the
packet is processed by the second media, it has already been sent over
the first one. However, when the first transmission is delayed (e.g.
because of insufficient bandwidth or through a shaper), the next bearer
will overwrite the hardware header, resulting in the packet being sent:
a) with the wrong source address, when bearers of the same type,
e.g. ethernet, are involved
b) with a completely corrupt header, or even dropped, when bearers of
different types are involved.

So when the same socket buffer is to be sent multiple times, send a
pskb_copy() instead (from the second instance on), and release it
afterwards (the bearer will skb_clone() it anyway).

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:08:58 -04:00
Gerlando Falauto
77861d9c00 tipc: tipc_bcbearer_send(): simplify bearer selection
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:08:58 -04:00
Gerlando Falauto
e616071094 tipc: cosmetic: clean up comments and break a long line
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 16:08:58 -04:00
Linus Torvalds
1db772216f Merge branch 'for-3.10' of git://linux-nfs.org/~bfields/linux
Pull nfsd changes from J Bruce Fields:
 "Highlights include:

   - Some more DRC cleanup and performance work from Jeff Layton

   - A gss-proxy upcall from Simo Sorce: currently krb5 mounts to the
     server using credentials from Active Directory often fail due to
     limitations of the svcgssd upcall interface.  This replacement
     lifts those limitations.  The existing upcall is still supported
     for backwards compatibility.

   - More NFSv4.1 support: at this point, if a user with a current
     client who upgrades from 4.0 to 4.1 should see no regressions.  In
     theory we do everything a 4.1 server is required to do.  Patches
     for a couple minor exceptions are ready for 3.11, and with those
     and some more testing I'd like to turn 4.1 on by default in 3.11."

Fix up semantic conflict as per Stephen Rothwell and linux-next:

Commit 030d794bf4 ("SUNRPC: Use gssproxy upcall for server RPCGSS
authentication") adds two new users of "PDE(inode)->data", but we're
supposed to use "PDE_DATA(inode)" instead since commit d9dda78bad
("procfs: new helper - PDE_DATA(inode)").

The old PDE() macro is no longer available since commit c30480b92c
("proc: Make the PROC_I() and PDE() macros internal to procfs")

* 'for-3.10' of git://linux-nfs.org/~bfields/linux: (60 commits)
  NFSD: SECINFO doesn't handle unsupported pseudoflavors correctly
  NFSD: Simplify GSS flavor encoding in nfsd4_do_encode_secinfo()
  nfsd: make symbol nfsd_reply_cache_shrinker static
  svcauth_gss: fix error return code in rsc_parse()
  nfsd4: don't remap EISDIR errors in rename
  svcrpc: fix gss-proxy to respect user namespaces
  SUNRPC: gssp_procedures[] can be static
  SUNRPC: define {create,destroy}_use_gss_proxy_proc_entry in !PROC case
  nfsd4: better error return to indicate SSV non-support
  nfsd: fix EXDEV checking in rename
  SUNRPC: Use gssproxy upcall for server RPCGSS authentication.
  SUNRPC: Add RPC based upcall mechanism for RPCGSS auth
  SUNRPC: conditionally return endtime from import_sec_context
  SUNRPC: allow disabling idle timeout
  SUNRPC: attempt AF_LOCAL connect on setup
  nfsd: Decode and send 64bit time values
  nfsd4: put_client_renew_locked can be static
  nfsd4: remove unused macro
  nfsd4: remove some useless code
  nfsd4: implement SEQ4_STATUS_RECALLABLE_STATE_REVOKED
  ...
2013-05-03 10:59:39 -07:00
Linus Torvalds
797994f81a Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:

 - XTS mode optimisation for twofish/cast6/camellia/aes on x86

 - AVX2/x86_64 implementation for blowfish/twofish/serpent/camellia

 - SSSE3/AVX/AVX2 optimisations for sha256/sha512

 - Added driver for SAHARA2 crypto accelerator

 - Fix for GMAC when used in non-IPsec secnarios

 - Added generic CMAC implementation (including IPsec glue)

 - IP update for crypto/atmel

 - Support for more than one device in hwrng/timeriomem

 - Added Broadcom BCM2835 RNG driver

 - Misc fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (59 commits)
  crypto: caam - fix job ring cleanup code
  crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher
  crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher
  crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher
  crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher
  crypto: tcrypt - add async cipher speed tests for blowfish
  crypto: testmgr - extend camellia test-vectors for camellia-aesni/avx2
  crypto: aesni_intel - fix Kconfig problem with CRYPTO_GLUE_HELPER_X86
  crypto: aesni_intel - add more optimized XTS mode for x86-64
  crypto: x86/camellia-aesni-avx - add more optimized XTS code
  crypto: cast6-avx: use new optimized XTS code
  crypto: x86/twofish-avx - use optimized XTS code
  crypto: x86 - add more optimized XTS-mode for serpent-avx
  xfrm: add rfc4494 AES-CMAC-96 support
  crypto: add CMAC support to CryptoAPI
  crypto: testmgr - add empty test vectors for null ciphers
  crypto: testmgr - add AES GMAC test vectors
  crypto: gcm - fix rfc4543 to handle async crypto correctly
  crypto: gcm - make GMAC work when dst and src are different
  hwrng: timeriomem - added devicetree hooks
  ...
2013-05-02 14:53:12 -07:00
Linus Torvalds
736a2dd257 Lots of virtio work which wasn't quite ready for last merge window. Plus
I dived into lguest again, reworking the pagetable code so we can move
 the switcher page: our fixmaps sometimes take more than 2MB now...
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRga7lAAoJENkgDmzRrbjx/yIQAKpqIBtxOJeYH3SY+Uoe7Cfp
 toNYcpJEldvb0UcWN8M2cSZpHoxl1SUoq9djwcM29tcKa7EZAjHaGtb/Q1qMTDgv
 +B3WAfiGU2pmXFxLAkbrlLNGnysy24JspqJQ5hcYV84EiBxQdZp+nCYgOphd+GMK
 ww16vo9ya8jFjzt3GeRp/Heb3vEzV4Cp6BC3i0m8A3WNpEpbRb66pqXNk5o8ggJO
 SxQOKSXmUM+0m+jKSul5xn3e2Ls2LOrZZ8/DIHA+gW66N4Zab7n2/j1Q9VRxb4lh
 FqnR7KwgBX8OCh9IsBDqQYS7MohvMYge6eUdLtFrq84jvMleMEhrC8q9v2tucFUb
 5t18CLwvyK7Gdg6UCKiZ7YSPcuURAILO16al9bh5IseeBDsuX+43VsvQoBmFn9k6
 cLOVTZ6BlOmahK5PyRYFSvLa9Rxzr/05Mr7oYq9UgshD9io78dnqczFYIORF53rW
 zD7C4HuTZfYJFfNd0wAJ0RfVXnf8QvDlMdo7zPC26DSXNWqj8OexCY0qqSWUB+2F
 vcfJP6NkV4fZB8aawWIFUVwc64yqtt2uPVLa7ATZWqk16PgKrchGewmw3tiEwOgu
 1l7xgffTRRUIJsqaCZoXdgw3yezcKRjuUBcOxL09lDAAhc+NxWNvzZBsKp66DwDk
 yZQKn0OdXnuf0CeEOfFf
 =1tYL
 -----END PGP SIGNATURE-----

Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull virtio & lguest updates from Rusty Russell:
 "Lots of virtio work which wasn't quite ready for last merge window.

  Plus I dived into lguest again, reworking the pagetable code so we can
  move the switcher page: our fixmaps sometimes take more than 2MB now..."

Ugh.  Annoying conflicts with the tcm_vhost -> vhost_scsi rename.
Hopefully correctly resolved.

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (57 commits)
  caif_virtio: Remove bouncing email addresses
  lguest: improve code readability in lg_cpu_start.
  virtio-net: fill only rx queues which are being used
  lguest: map Switcher below fixmap.
  lguest: cache last cpu we ran on.
  lguest: map Switcher text whenever we allocate a new pagetable.
  lguest: don't share Switcher PTE pages between guests.
  lguest: expost switcher_pages array (as lg_switcher_pages).
  lguest: extract shadow PTE walking / allocating.
  lguest: make check_gpte et. al return bool.
  lguest: assume Switcher text is a single page.
  lguest: rename switcher_page to switcher_pages.
  lguest: remove RESERVE_MEM constant.
  lguest: check vaddr not pgd for Switcher protection.
  lguest: prepare to make SWITCHER_ADDR a variable.
  virtio: console: replace EMFILE with EBUSY for already-open port
  virtio-scsi: reset virtqueue affinity when doing cpu hotplug
  virtio-scsi: introduce multiqueue support
  virtio-scsi: push vq lock/unlock into virtscsi_vq_done
  virtio-scsi: pass struct virtio_scsi to virtqueue completion function
  ...
2013-05-02 14:14:04 -07:00
Bjørn Mork
b29d314518 net: vlan,ethtool: netdev_features_t is more than 32 bit
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-02 13:58:12 -04:00
Patrick McHardy
6708c9e5cc net: use netdev_features_t in skb_needs_linearize()
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-02 13:58:12 -04:00
Alex Elder
5522ae0b68 libceph: use slab cache for osd client requests
Create a slab cache to manage allocation of ceph_osdc_request
structures.

This resolves:
    http://tracker.ceph.com/issues/3926

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02 11:58:41 -05:00
Alex Elder
81b36be4c5 libceph: allocate ceph message data with a slab allocator
Create a slab cache to manage ceph_msg_data structure allocation.

This is part of:
    http://tracker.ceph.com/issues/3926

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02 11:58:36 -05:00
Alex Elder
e3d5d63804 libceph: allocate ceph messages with a slab allocator
Create a slab cache to manage ceph_msg structure allocation.

This is part of:
    http://tracker.ceph.com/issues/3926

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-02 11:58:31 -05:00
Alex Elder
4f0dcb10cf libceph: create source file "net/ceph/snapshot.c"
This creates a new source file "net/ceph/snapshot.c" to contain
utility routines related to ceph snapshot contexts.  The main
motivation was to define ceph_create_snap_context() as a common way
to create these structures, but I've moved the definitions of
ceph_get_snap_context() and ceph_put_snap_context() there too.
(The benefit of inlining those is very small, and I'd rather
keep this collection of functions together.)

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:20:08 -07:00
Alex Elder
9ef1ee5a1b libceph: fix byte order mismatch
A WATCH op includes an object version.  The version that's supplied
is incorrectly byte-swapped osd_req_op_watch_init() where it's first
assigned (it's been this way since that code was first added).

The result is that the version sent to the osd is wrong, because
that value gets byte-swapped again in osd_req_encode_op().  This
is the source of a sparse warning related to improper byte order in
the assignment.

The approach of using the version to avoid a race is deprecated
(see http://tracker.ceph.com/issues/3871), and the watch parameter
is no longer even examined by the osd.  So fix the assignment in
osd_req_op_watch_init() so it no longer does the byte swap.

This resolves:
    http://tracker.ceph.com/issues/3847

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:24 -07:00
Alex Elder
6c57b5545d libceph: support pages for class request data
Add the ability to provide an array of pages as outbound request
data for object class method calls.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:06 -07:00
Alex Elder
a51b272e9e libceph: fix two messenger bugs
This patch makes four small changes in the ceph messenger.

While getting copyup functionality working I found two bugs in the
messenger.  Existing paths through the code did not trigger these
problems, but they're fixed here:
    - In ceph_msg_data_pagelist_cursor_init(), the cursor's
      last_piece field was being checked against the length
      supplied.  This was OK until this commit: ccba6d98 libceph:
      implement multiple data items in a message That commit changed
      the cursor init routines to allow lengths to be supplied that
      exceeded the size of the current data item. Because of this,
      we have to use the assigned cursor resid field rather than the
      provided length in determining whether the cursor points to
      the last piece of a data item.
    - In ceph_msg_data_add_pages(), a BUG_ON() was erroneously
      catching attempts to add page data to a message if the message
      already had data assigned to it. That was OK until that same
      commit, at which point it was fine for messages to have
      multiple data items. It slipped through because that BUG_ON()
      call was present twice in that function. (You can never be too
      careful.)

In addition two other minor things are changed:
    - In ceph_msg_data_cursor_init(), the local variable "data" was
      getting assigned twice.
    - In ceph_msg_data_advance(), it was assumed that the
      type-specific advance routine would set new_piece to true
      after it advanced past the last piece. That may have been
      fine, but since we check for that case we might as well set it
      explicitly in ceph_msg_data_advance().

This resolves:
    http://tracker.ceph.com/issues/4762

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:05 -07:00
Alex Elder
49719778bf libceph: support raw data requests
Allow osd request ops that aren't otherwise structured (not class,
extent, or watch ops) to specify "raw" data to be used to hold
incoming data for the op.  Make use of this capability for the osd
STAT op.

Prefix the name of the private function osd_req_op_init() with "_",
and expose a new function by that (earlier) name whose purpose is to
initialize osd ops with (only) implied data.

For now we'll just support the use of a page array for an osd op
with incoming raw data.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:19:00 -07:00
Alex Elder
863c7eb590 libceph: clean up osd data field access functions
There are a bunch of functions defined to encapsulate getting the
address of a data field for a particular op in an osd request.
They're all defined the same way, so create a macro to take the
place of all of them.

Two of these are used outside the osd client code, so preserve them
(but convert them to use the new macro internally).  Stop exporting
the ones that aren't used elsewhere.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:59 -07:00
Alex Elder
406e2c9f92 libceph: kill off osd data write_request parameters
In the incremental move toward supporting distinct data items in an
osd request some of the functions had "write_request" parameters to
indicate, basically, whether the data belonged to in_data or the
out_data.  Now that we maintain the data fields in the op structure
there is no need to indicate the direction, so get rid of the
"write_request" parameters.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:58 -07:00
Alex Elder
26be88087a libceph: change how "safe" callback is used
An osd request currently has two callbacks.  They inform the
initiator of the request when we've received confirmation for the
target osd that a request was received, and when the osd indicates
all changes described by the request are durable.

The only time the second callback is used is in the ceph file system
for a synchronous write.  There's a race that makes some handling of
this case unsafe.  This patch addresses this problem.  The error
handling for this callback is also kind of gross, and this patch
changes that as well.

In ceph_sync_write(), if a safe callback is requested we want to add
the request on the ceph inode's unsafe items list.  Because items on
this list must have their tid set (by ceph_osd_start_request()), the
request added *after* the call to that function returns.  The
problem with this is that there's a race between starting the
request and adding it to the unsafe items list; the request may
already be complete before ceph_sync_write() even begins to put it
on the list.

To address this, we change the way the "safe" callback is used.
Rather than just calling it when the request is "safe", we use it to
notify the initiator the bounds (start and end) of the period during
which the request is *unsafe*.  So the initiator gets notified just
before the request gets sent to the osd (when it is "unsafe"), and
again when it's known the results are durable (it's no longer
unsafe).  The first call will get made in __send_request(), just
before the request message gets sent to the messenger for the first
time.  That function is only called by __send_queued(), which is
always called with the osd client's request mutex held.

We then have this callback function insert the request on the ceph
inode's unsafe list when we're told the request is unsafe.  This
will avoid the race because this call will be made under protection
of the osd client's request mutex.  It also nicely groups the setup
and cleanup of the state associated with managing unsafe requests.

The name of the "safe" callback field is changed to "unsafe" to
better reflect its new purpose.  It has a Boolean "unsafe" parameter
to indicate whether the request is becoming unsafe or is now safe.
Because the "msg" parameter wasn't used, we drop that.

This resolves the original problem reportedin:
    http://tracker.ceph.com/issues/4706

Reported-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01 21:18:52 -07:00
Alex Elder
04017e29bb libceph: make method call data be a separate data item
Right now the data for a method call is specified via a pointer and
length, and it's copied--along with the class and method name--into
a pagelist data item to be sent to the osd.  Instead, encode the
data in a data item separate from the class and method names.

This will allow large amounts of data to be supplied to methods
without copying.  Only rbd uses the class functionality right now,
and when it really needs this it will probably need to use a page
array rather than a page list.  But this simple implementation
demonstrates the functionality on the osd client, and that's enough
for now.

This resolves:
    http://tracker.ceph.com/issues/4104

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:35 -07:00
Alex Elder
90af36022a libceph: add, don't set data for a message
Change the names of the functions that put data on a pagelist to
reflect that we're adding to whatever's already there rather than
just setting it to the one thing.  Currently only one data item is
ever added to a message, but that's about to change.

This resolves:
    http://tracker.ceph.com/issues/2770

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:34 -07:00
Alex Elder
ca8b3a6917 libceph: implement multiple data items in a message
This patch adds support to the messenger for more than one data item
in its data list.

A message data cursor has two more fields to support this:
    - a count of the number of bytes left to be consumed across
      all data items in the list, "total_resid"
    - a pointer to the head of the list (for validation only)

The cursor initialization routine has been split into two parts: the
outer one, which initializes the cursor for traversing the entire
list of data items; and the inner one, which initializes the cursor
to start processing a single data item.

When a message cursor is first initialized, the outer initialization
routine sets total_resid to the length provided.  The data pointer
is initialized to the first data item on the list.  From there, the
inner initialization routine finishes by setting up to process the
data item the cursor points to.

Advancing the cursor consumes bytes in total_resid.  If the resid
field reaches zero, it means the current data item is fully
consumed.  If total_resid indicates there is more data, the cursor
is advanced to point to the next data item, and then the inner
initialization routine prepares for using that.  (A check is made at
this point to make sure we don't wrap around the front of the list.)

The type-specific init routines are modified so they can be given a
length that's larger than what the data item can support.  The resid
field is initialized to the smaller of the provided length and the
length of the entire data item.

When total_resid reaches zero, we're done.

This resolves:
    http://tracker.ceph.com/issues/3761

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:33 -07:00
Alex Elder
5240d9f95d libceph: replace message data pointer with list
In place of the message data pointer, use a list head which links
through message data items.  For now we only support a single entry
on that list.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:32 -07:00
Alex Elder
8ae4f4f5c0 libceph: have cursor point to data
Rather than having a ceph message data item point to the cursor it's
associated with, have the cursor point to a data item.  This will
allow a message cursor to be used for more than one data item.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:30 -07:00
Alex Elder
36153ec9dd libceph: move cursor into message
A message will only be processing a single data item at a time, so
there's no need for each data item to have its own cursor.

Move the cursor embedded in the message data structure into the
message itself.  To minimize the impact, keep the data->cursor
field, but make it be a pointer to the cursor in the message.

Move the definition of ceph_msg_data above ceph_msg_data_cursor so
the cursor can point to the data without a forward definition rather
than vice-versa.

This and the upcoming patches are part of:
    http://tracker.ceph.com/issues/3761

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:29 -07:00
Alex Elder
c851c49591 libceph: record bio length
The bio is the only data item type that doesn't record its full
length.  Fix that.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:28 -07:00
Alex Elder
f759ebb968 libceph: skip message if too big to receive
We know the length of our message buffers.  If we get a message
that's too long, just dump it and ignore it.  If skip was set
then con->in_msg won't be valid, so be careful not to dereference
a null pointer in the process.

This resolves:
    http://tracker.ceph.com/issues/4664

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:27 -07:00
Alex Elder
ea96571f7b libceph: fix possible CONFIG_BLOCK build problem
This patch:
    15a0d7b libceph: record message data length
did not enclose some bio-specific code inside CONFIG_BLOCK as
it should have.  Fix that.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:26 -07:00
Alex Elder
5476492fba libceph: kill off osd request r_data_in and r_data_out
Finally!  Convert the osd op data pointers into real structures, and
make the switch over to using them instead of having all ops share
the in and/or out data structures in the osd request.

Set up a new function to traverse the set of ops and release any
data associated with them (pages).

This and the patches leading up to it resolve:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:25 -07:00
Alex Elder
ec9123c567 libceph: set the data pointers when encoding ops
Still using the osd request r_data_in and r_data_out pointer, but
we're basically only referring to it via the data pointers in the
osd ops.  And we're transferring that information to the request
or reply message only when the op indicates it's needed, in
osd_req_encode_op().

To avoid a forward reference, ceph_osdc_msg_data_set() was moved up
in the file.

Don't bother calling ceph_osd_data_init(), in ceph_osd_alloc(),
because the ops array will already be zeroed anyway.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:24 -07:00
Alex Elder
a4ce40a9a7 libceph: combine initializing and setting osd data
This ends up being a rather large patch but what it's doing is
somewhat straightforward.

Basically, this is replacing two calls with one.  The first of the
two calls is initializing a struct ceph_osd_data with data (either a
page array, a page list, or a bio list); the second is setting an
osd request op so it associates that data with one of the op's
parameters.  In place of those two will be a single function that
initializes the op directly.

That means we sort of fan out a set of the needed functions:
    - extent ops with pages data
    - extent ops with pagelist data
    - extent ops with bio list data
and
    - class ops with page data for receiving a response

We also have define another one, but it's only used internally:
    - class ops with pagelist data for request parameters

Note that we *still* haven't gotten rid of the osd request's
r_data_in and r_data_out fields.  All the osd ops refer to them for
their data.  For now, these data fields are pointers assigned to the
appropriate r_data_* field when these new functions are called.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:23 -07:00
Alex Elder
39b44cbe86 libceph: set message data when building osd request
All calls of ceph_osdc_start_request() are preceded (in the case of
rbd, almost) immediately by a call to ceph_osdc_build_request().

Move the build calls at the top of ceph_osdc_start_request() out of
there and into the ceph_osdc_build_request().  Nothing prevents
moving these calls to the top of ceph_osdc_build_request(), either
(and we're going to want them there in the next patch) so put them
at the top.

This and the next patch are related to:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:22 -07:00
Alex Elder
e65550fd94 libceph: move ceph_osdc_build_request()
This simply moves ceph_osdc_build_request() later in its source
file without any change.  Done as a separate patch to facilitate
review of the change in the next patch.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:21 -07:00
Alex Elder
5f562df5f5 libceph: format class info at init time
An object class method is formatted using a pagelist which contains
the class name, the method name, and the data concatenated into an
osd request's outbound data.

Currently when a class op is initialized in osd_req_op_cls_init(),
the lengths of and pointers to these three items are recorded.
Later, when the op is getting formatted into the request message, a
new pagelist is created and that is when these items get copied into
the pagelist.

This patch makes it so the pagelist to hold these items is created
when the op is initialized instead.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:19 -07:00
Alex Elder
c99d2d4abb libceph: specify osd op by index in request
An osd request now holds all of its source op structures, and every
place that initializes one of these is in fact initializing one
of the entries in the the osd request's array.

So rather than supplying the address of the op to initialize, have
caller specify the osd request and an indication of which op it
would like to initialize.  This better hides the details the
op structure (and faciltates moving the data pointers they use).

Since osd_req_op_init() is a common routine, and it's not used
outside the osd client code, give it static scope.  Also make
it return the address of the specified op (so all the other
init routines don't have to repeat that code).

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:15 -07:00
Alex Elder
8c042b0df9 libceph: add data pointers in osd op structures
An extent type osd operation currently implies that there will
be corresponding data supplied in the data portion of the request
(for write) or response (for read) message.  Similarly, an osd class
method operation implies a data item will be supplied to receive
the response data from the operation.

Add a ceph_osd_data pointer to each of those structures, and assign
it to point to eithre the incoming or the outgoing data structure in
the osd message.  The data is not always available when an op is
initially set up, so add two new functions to allow setting them
after the op has been initialized.

Begin to make use of the data item pointer available in the osd
operation rather than the request data in or out structure in
places where it's convenient.  Add some assertions to verify
pointers are always set the way they're expected to be.

This is a sort of stepping stone toward really moving the data
into the osd request ops, to allow for some validation before
making that jump.

This is the first in a series of patches that resolve:
    http://tracker.ceph.com/issues/4657

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:14 -07:00