In nested_enable_evmcs() evmcs_already_enabled check doesn't really do
anything: controls are already sanitized and we return '0' regardless.
Just drop the check.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the CONFIG_X86_64 condition from the low level non-canonical
helpers to effectively enable non-canonical checks on 32-bit KVM.
Non-canonical checks are performed by hardware if the CPU *supports*
64-bit mode, whether or not the CPU is actually in 64-bit mode is
irrelevant.
For the most part, skipping non-canonical checks on 32-bit KVM is ok-ish
because 32-bit KVM always (hopefully) drops bits 63:32 of whatever value
it's checking before propagating it to hardware, and architecturally,
the expected behavior for the guest is a bit of a grey area since the
vCPU itself doesn't support 64-bit mode. I.e. a 32-bit KVM guest can
observe the missed checks in several paths, e.g. INVVPID and VM-Enter,
but it's debatable whether or not the missed checks constitute a bug
because technically the vCPU doesn't support 64-bit mode.
The primary motivation for enabling the non-canonical checks is defense
in depth. As mentioned above, a guest can trigger a missed check via
INVVPID or VM-Enter. INVVPID is straightforward as it takes a 64-bit
virtual address as part of its 128-bit INVVPID descriptor and fails if
the address is non-canonical, even if INVVPID is executed in 32-bit PM.
Nested VM-Enter is a bit more convoluted as it requires the guest to
write natural width VMCS fields via memory accesses and then VMPTRLD the
VMCS, but it's still possible. In both cases, KVM is saved from a true
bug only because its flows that propagate values to hardware (correctly)
take "unsigned long" parameters and so drop bits 63:32 of the bad value.
Explicitly performing the non-canonical checks makes it less likely that
a bad value will be propagated to hardware, e.g. in the INVVPID case,
if __invvpid() didn't implicitly drop bits 63:32 then KVM would BUG() on
the resulting unexpected INVVPID failure due to hardware rejecting the
non-canonical address.
The only downside to enabling the non-canonical checks is that it adds a
relatively small amount of overhead, but the affected flows are not hot
paths, i.e. the overhead is negligible.
Note, KVM technically could gate the non-canonical checks on 32-bit KVM
with static_cpu_has(X86_FEATURE_LM), but on bare metal that's an even
bigger waste of code for everyone except the 0.00000000000001% of the
population running on Yonah, and nested 32-bit on 64-bit already fudges
things with respect to 64-bit CPU behavior.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Also do so in nested_vmx_check_host_state as reported by Krish. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Writes to MSR_CORE_PERF_GLOBAL_CONTROL should never fail if the VM-exit
and VM-entry controls are exposed to L1. Promote the checks to perform a
full WARN if kvm_set_msr() fails and remove the now unused macro
SET_MSR_OR_WARN().
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove an unused struct x86_emulate_ctxt * param from low level helpers
used to access guest FPU state. The unused param was left behind by
commit 6ab0b9feb8 ("x86,kvm: remove KVM emulator get_fpu / put_fpu").
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reload the current thread's FPU state, which contains the guest's FPU
state, to the CPU registers if necessary during vcpu_enter_guest().
TIF_NEED_FPU_LOAD can be set any time control is transferred out of KVM,
e.g. if I/O is triggered during a KVM call to get_user_pages() or if a
softirq occurs while KVM is scheduled in.
Moving the handling of TIF_NEED_FPU_LOAD from vcpu_enter_guest() to
kvm_arch_vcpu_load(), effectively kvm_sched_in(), papered over a bug
where kvm_put_guest_fpu() failed to account for TIF_NEED_FPU_LOAD. The
easiest way to the kvm_put_guest_fpu() bug was to run with involuntary
preemption enable, thus handling TIF_NEED_FPU_LOAD during kvm_sched_in()
made the bug go away. But, removing the handling in vcpu_enter_guest()
exposed KVM to the rare case of a softirq triggering kernel_fpu_begin()
between vcpu_load() and vcpu_enter_guest().
Now that kvm_{load,put}_guest_fpu() correctly handle TIF_NEED_FPU_LOAD,
revert the commit to both restore the vcpu_enter_guest() behavior and
eliminate the superfluous switch_fpu_return() in kvm_arch_vcpu_load().
Note, leaving the handling in kvm_arch_vcpu_load() isn't wrong per se,
but it is unnecessary, and most critically, makes it extremely difficult
to find bugs such as the kvm_put_guest_fpu() issue due to shrinking the
window where a softirq can corrupt state.
A sample trace triggered by warning if TIF_NEED_FPU_LOAD is set while
vcpu state is loaded:
<IRQ>
gcmaes_crypt_by_sg.constprop.12+0x26e/0x660
? 0xffffffffc024547d
? __qdisc_run+0x83/0x510
? __dev_queue_xmit+0x45e/0x990
? ip_finish_output2+0x1a8/0x570
? fib4_rule_action+0x61/0x70
? fib4_rule_action+0x70/0x70
? fib_rules_lookup+0x13f/0x1c0
? helper_rfc4106_decrypt+0x82/0xa0
? crypto_aead_decrypt+0x40/0x70
? crypto_aead_decrypt+0x40/0x70
? crypto_aead_decrypt+0x40/0x70
? esp_output_tail+0x8f4/0xa5a [esp4]
? skb_ext_add+0xd3/0x170
? xfrm_input+0x7a6/0x12c0
? xfrm4_rcv_encap+0xae/0xd0
? xfrm4_transport_finish+0x200/0x200
? udp_queue_rcv_one_skb+0x1ba/0x460
? udp_unicast_rcv_skb.isra.63+0x72/0x90
? __udp4_lib_rcv+0x51b/0xb00
? ip_protocol_deliver_rcu+0xd2/0x1c0
? ip_local_deliver_finish+0x44/0x50
? ip_local_deliver+0xe0/0xf0
? ip_protocol_deliver_rcu+0x1c0/0x1c0
? ip_rcv+0xbc/0xd0
? ip_rcv_finish_core.isra.19+0x380/0x380
? __netif_receive_skb_one_core+0x7e/0x90
? netif_receive_skb_internal+0x3d/0xb0
? napi_gro_receive+0xed/0x150
? 0xffffffffc0243c77
? net_rx_action+0x149/0x3b0
? __do_softirq+0xe4/0x2f8
? handle_irq_event_percpu+0x6a/0x80
? irq_exit+0xe6/0xf0
? do_IRQ+0x7f/0xd0
? common_interrupt+0xf/0xf
</IRQ>
? irq_entries_start+0x20/0x660
? vmx_get_interrupt_shadow+0x2f0/0x710 [kvm_intel]
? kvm_set_msr_common+0xfc7/0x2380 [kvm]
? recalibrate_cpu_khz+0x10/0x10
? ktime_get+0x3a/0xa0
? kvm_arch_vcpu_ioctl_run+0x107/0x560 [kvm]
? kvm_init+0x6bf/0xd00 [kvm]
? __seccomp_filter+0x7a/0x680
? do_vfs_ioctl+0xa4/0x630
? security_file_ioctl+0x32/0x50
? ksys_ioctl+0x60/0x90
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x5f/0x1a0
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 9564a1ccad733a90 ]---
This reverts commit e751732486.
Fixes: e751732486 ("KVM: X86: Fix fpu state crash in kvm guest")
Reported-by: Derek Yerger <derek@djy.llc>
Reported-by: kernel@najdan.com
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Thomas Lambertz <mail@thomaslambertz.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lock the FPU regs and reload the current thread's FPU state, which holds
the guest's FPU state, to the CPU registers if necessary prior to
accessing guest FPU state as part of emulation. kernel_fpu_begin() can
be called from softirq context, therefore KVM must ensure softirqs are
disabled (locking the FPU regs disables softirqs) when touching CPU FPU
state.
Note, for all intents and purposes this reverts commit 6ab0b9feb8
("x86,kvm: remove KVM emulator get_fpu / put_fpu"), but at the time it
was applied, removing get/put_fpu() was correct. The re-introduction
of {get,put}_fpu() is necessitated by the deferring of FPU state load.
Fixes: 5f409e20b7 ("x86/fpu: Defer FPU state load until return to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle TIF_NEED_FPU_LOAD similar to how fpu__copy() handles the flag
when duplicating FPU state to a new task struct. TIF_NEED_FPU_LOAD can
be set any time control is transferred out of KVM, be it voluntarily,
e.g. if I/O is triggered during a KVM call to get_user_pages, or
involuntarily, e.g. if softirq runs after an IRQ occurs. Therefore,
KVM must account for TIF_NEED_FPU_LOAD whenever it is (potentially)
accessing CPU FPU state.
Fixes: 5f409e20b7 ("x86/fpu: Defer FPU state load until return to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 95145c25a7.
The next few patches will fix the issue so the warning is not
needed anymore; revert it separately to simplify application to
stable kernels.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Short-circuit kvm_apic_accept_pic_intr() when pic intr is accepted, there
is no need to proceed further. Also remove unnecessary var r.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception pending event is cleared by kvm_clear_exception_queue(). We
shouldn't clear it again.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes Spectre-v1/L1TF vulnerabilities in intel_find_fixed_event()
and intel_rdpmc_ecx_to_pmc().
kvm_rdpmc() (ancestor of intel_find_fixed_event()) and
reprogram_fixed_counter() (ancestor of intel_rdpmc_ecx_to_pmc()) are
exported symbols so KVM should treat them conservatively from a security
perspective.
Fixes: 25462f7f52 ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in __kvm_set_dr() and
kvm_get_dr().
Both kvm_get_dr() and kvm_set_dr() (a wrapper of __kvm_set_dr()) are
exported symbols so KVM should tream them conservatively from a security
perspective.
Fixes: 020df0794f ("KVM: move DR register access handling into generic code")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in vmx_handle_exit().
While exit_reason is set by the hardware and therefore should not be
attacker-influenced, an unknown exit_reason could potentially be used to
perform such an attack.
Fixes: 55d2375e58 ("KVM: nVMX: Move nested code to dedicated files")
Signed-off-by: Marios Pomonis <pomonis@google.com>
Signed-off-by: Nick Finco <nifi@google.com>
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes Spectre-v1/L1TF vulnerabilities in
vmx_read_guest_seg_selector(), vmx_read_guest_seg_base(),
vmx_read_guest_seg_limit() and vmx_read_guest_seg_ar(). When
invoked from emulation, these functions contain index computations
based on the (attacker-influenced) segment value. Using constants
prevents the attack.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in set_msr_mce() and
get_msr_mce().
Both functions contain index computations based on the
(attacker-controlled) MSR number.
Fixes: 890ca9aefa ("KVM: Add MCE support")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in the get_gp_pmc() and
get_fixed_pmc() functions.
They both contain index computations based on the (attacker-controlled)
MSR number.
Fixes: 25462f7f52 ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in fixed_msr_to_seg_unit().
This function contains index computations based on the
(attacker-controlled) MSR number.
Fixes: de9aef5e1a ("KVM: MTRR: introduce fixed_mtrr_segment table")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in kvm_lapic_reg_write().
This function contains index computations based on the
(attacker-controlled) MSR number.
Fixes: 0105d1a526 ("KVM: x2apic interface to lapic")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in ioapic_write_indirect().
This function contains index computations based on the
(attacker-controlled) IOREGSEL register.
This patch depends on patch
"KVM: x86: Protect ioapic_read_indirect() from Spectre-v1/L1TF attacks".
Fixes: 70f93dae32 ("KVM: Use temporary variable to shorten lines.")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in ioapic_read_indirect().
This function contains index computations based on the
(attacker-controlled) IOREGSEL register.
Fixes: a2c118bfab ("KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798)")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in picdev_write().
It replaces index computations based on the (attacked-controlled) port
number with constants through a minor refactoring.
Fixes: 85f455f7dd ("KVM: Add support for in-kernel PIC emulation")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes Spectre-v1/L1TF vulnerabilities in kvm_hv_msr_get_crash_data()
and kvm_hv_msr_set_crash_data().
These functions contain index computations that use the
(attacker-controlled) MSR number.
Fixes: e7d9513b60 ("kvm/x86: added hyper-v crash msrs into kvm hyperv context")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes a Spectre-v1/L1TF vulnerability in x86_decode_insn().
kvm_emulate_instruction() (an ancestor of x86_decode_insn()) is an exported
symbol, so KVM should treat it conservatively from a security perspective.
Fixes: 045a282ca4 ("KVM: emulator: implement fninit, fnstsw, fnstcw")
Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current SVM implementation does not have support for handling PKU. Guests
running on a host with future AMD cpus that support the feature will read
garbage from the PKRU register and will hit segmentation faults on boot as
memory is getting marked as protected that should not be. Ensure that cpuid
from SVM does not advertise the feature.
Signed-off-by: John Allen <john.allen@amd.com>
Cc: stable@vger.kernel.org
Fixes: 0556cbdc2f ("x86/pkeys: Don't check if PKRU is zero before writing it")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Open code the allocation and freeing of the vcpu->run page in
kvm_vm_ioctl_create_vcpu() and kvm_vcpu_destroy() respectively. Doing
so allows kvm_vcpu_init() to be a pure init function and eliminates
kvm_vcpu_uninit() entirely.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the putting of vcpu->pid to kvm_vcpu_destroy(). vcpu->pid is
guaranteed to be NULL when kvm_vcpu_uninit() is called in the error path
of kvm_vm_ioctl_create_vcpu(), e.g. it is explicitly nullified by
kvm_vcpu_init() and is only changed by KVM_RUN.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() now that all
arch specific implementations are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an arm specific hook to free the arm64-only sve_state. Doing so
eliminates the last functional code from kvm_arch_vcpu_uninit() across
all architectures and paves the way for removing kvm_arch_vcpu_init()
and kvm_arch_vcpu_uninit() entirely.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold init() into create() now that the two are called back-to-back by
common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last
action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create()
immediately thereafter). Rinse and repeat for kvm_arch_vcpu_uninit()
and kvm_arch_vcpu_destroy(). This paves the way for removing
kvm_arch_vcpu_{un}init() entirely.
Note, calling kvmppc_mmu_destroy() if kvmppc_core_vcpu_create() fails
may or may not be necessary. Move it along with the more obvious call
to kvmppc_subarch_vcpu_uninit() so as not to inadvertantly introduce a
functional change and/or bug.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold init() into create() now that the two are called back-to-back by
common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last
action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create()
immediately thereafter). This paves the way for removing
kvm_arch_vcpu_{un}init() entirely.
Note, there is no associated unwinding in kvm_arch_vcpu_uninit() that
needs to be relocated (to kvm_arch_vcpu_destroy()).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold init() into create() now that the two are called back-to-back by
common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last
action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create()
immediately thereafter). Rinse and repeat for kvm_arch_vcpu_uninit()
and kvm_arch_vcpu_destroy(). This paves the way for removing
kvm_arch_vcpu_{un}init() entirely.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold init() into create() now that the two are called back-to-back by
common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last
action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create()
immediately thereafter). This paves the way for removing
kvm_arch_vcpu_init() entirely.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_vcpu_setup() now that all arch specific implementations
are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold setup() into create() now that the two are called back-to-back by
common KVM code. This paves the way for removing kvm_arch_vcpu_setup().
Note, BookE directly implements kvm_arch_vcpu_setup() and PPC's common
kvm_arch_vcpu_create() is responsible for its own cleanup, thus the only
cleanup required when directly invoking kvmppc_core_vcpu_setup() is to
call .vcpu_free(), which is the BookE specific portion of PPC's
kvm_arch_vcpu_destroy() by way of kvmppc_core_vcpu_free().
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_arch_vcpu_setup() to kvm_s390_vcpu_setup() and manually call
the new function during kvm_arch_vcpu_create(). Define an empty
kvm_arch_vcpu_setup() as it's still required for compilation. This
is effectively a nop as kvm_arch_vcpu_create() and kvm_arch_vcpu_setup()
are called back-to-back by common KVM code. Obsoleting
kvm_arch_vcpu_setup() paves the way for its removal.
Note, gmap_remove() is now called if setup fails, as s390 was previously
freeing it via kvm_arch_vcpu_destroy(), which is called by common KVM
code if kvm_arch_vcpu_setup() fails.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold setup() into create() now that the two are called back-to-back by
common KVM code. This paves the way for removing kvm_arch_vcpu_setup().
Note, there is no unwind function associated with kvm_arch_vcpu_setup(),
i.e. no teardown path that also needs to be moved.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold setup() into create() now that the two are called back-to-back by
common KVM code. This paves the way for removing kvm_arch_vcpu_setup().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize the preempt notifier immediately in kvm_vcpu_init() to pave
the way for removing kvm_arch_vcpu_setup(), i.e. to allow arch specific
code to call vcpu_load() during kvm_arch_vcpu_create().
Back when preemption support was added, the location of the call to init
the preempt notifier was perfectly sane. The overall vCPU creation flow
featured a single arch specific hook and the preempt notifer was used
immediately after its initialization (by vcpu_load()). E.g.:
vcpu = kvm_arch_ops->vcpu_create(kvm, n);
if (IS_ERR(vcpu))
return PTR_ERR(vcpu);
preempt_notifier_init(&vcpu->preempt_notifier, &kvm_preempt_ops);
vcpu_load(vcpu);
r = kvm_mmu_setup(vcpu);
vcpu_put(vcpu);
if (r < 0)
goto free_vcpu;
Today, the call to preempt_notifier_init() is sandwiched between two
arch specific calls, kvm_arch_vcpu_create() and kvm_arch_vcpu_setup(),
which needlessly forces x86 (and possibly others?) to split its vCPU
creation flow. Init the preempt notifier prior to any arch specific
call so that each arch can independently decide how best to organize
its creation flow.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unexport kvm_vcpu_cache and kvm_vcpu_{un}init() and make them static
now that they are referenced only in kvm_main.c.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all architectures tightly couple vcpu allocation/free with the
mandatory calls to kvm_{un}init_vcpu(), move the sequences verbatim to
common KVM code.
Move both allocation and initialization in a single patch to eliminate
thrash in arch specific code. The bisection benefits of moving the two
pieces in separate patches is marginal at best, whereas the odds of
introducing a transient arch specific bug are non-zero.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
- New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver
-----BEGIN PGP SIGNATURE-----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=mv1v
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time we have a bunch of core changes to support dynamic channels,
hotplug of controllers, new apis for metadata ops etc along with new
drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.
Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver"
* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
dmaengine: Create symlinks between DMA channels and slaves
dmaengine: hisilicon: Add Kunpeng DMA engine support
dmaengine: idxd: add char driver to expose submission portal to userland
dmaengine: idxd: connect idxd to dmaengine subsystem
dmaengine: idxd: add descriptor manipulation routines
dmaengine: idxd: add sysfs ABI for idxd driver
dmaengine: idxd: add configuration component of driver
dmaengine: idxd: Init and probe for Intel data accelerators
dmaengine: add support to dynamic register/unregister of channels
dmaengine: break out channel registration
x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
dmaengine: Remove dma_request_slave_channel_compat() wrapper
dmaengine: Remove dma_device_satisfies_mask() wrapper
dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
dmaengine: zynqmp_dma: fix burst length configuration
dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
dmaengine: fsl-qdma: fix duplicated argument to &&
...
Pull livepatching updates from Jiri Kosina:
"Fixes for selftests and samples for 'shadow variables' livepatching
feature, from Petr Mladek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Handle allocation failure in the sample of shadow variable API
livepatch/samples/selftest: Use klp_shadow_alloc() API correctly
livepatch/selftest: Clean up shadow variable names and type
livepatch/sample: Use the right type for the leaking data pointer
Pull HID updates from Jiri Kosina:
"This time it's surprisingly quiet (probably due to the christmas
break):
- Logitech HID++ protocol improvements from Mazin Rezk, Pedro
Vanzella and Adrian Freund
- support for hidraw uniq ioctl from Marcel Holtmann"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'
hid-logitech-hidpp: read battery voltage from newer devices
HID: logitech: Add MX Master 3 Mouse
HID: logitech-hidpp: Support WirelessDeviceStatus connect events
HID: logitech-hidpp: Support translations from short to long reports
HID: hidraw: add support uniq ioctl
* Enable thermal policy for ASUS TUF FX705DY/FX505DY
* Support left round button on ASUS N56VB
* Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
* Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC driver
* Big clean up to Intel PMC core, PMC IPC and SCU IPC drivers
* Touchscreen support for the PiPO W11 tablet
The following is an automated git shortlog grouped by driver:
asus-nb-wmi:
- Support left round button on N56VB
asus-wmi:
- Fix keyboard brightness cannot be set to 0
- Set throttle thermal policy to default
- Support throttle thermal policy
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
- Style changes
- Add missed attribute for mlxreg-io sysfs interfaces
- Fix documentation inconsistency for mlxreg-io sysfs interfaces
GPD pocket fan:
- Allow somewhat lower/higher temperature limits
- Use default values when wrong modparams are given
intel_atomisp2_pm:
- Spelling fixes
- Refactor timeout loop
intel_mid_powerbtn:
- Take a copy of ddata
intel_pmc_core:
- update Comet Lake platform driver
- Fix spelling of MHz unit
- Fix indentation in function definitions
- Put more stuff under #ifdef DEBUG_FS
- Respect error code of kstrtou32_from_user()
- Add Intel Elkhart Lake support
- Add Intel Tiger Lake support
- Make debugfs entry for pch_ip_power_gating_status conditional
- Create platform dependent bitmap structs
- Remove unnecessary assignments
- Clean up: Remove comma after the termination line
intel_pmc_ipc:
- Switch to use driver->dev_groups
- Propagate error from kstrtoul()
- Use octal permissions in sysfs attributes
- Get rid of unnecessary includes
- Drop ipc_data_readb()
- Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
- Make intel_pmc_ipc_raw_cmd() static
- Make intel_pmc_ipc_simple_command() static
- Make intel_pmc_gcr_update() static
intel_scu_ipc:
- Reformat kernel-doc comments of exported functions
- Drop intel_scu_ipc_raw_command()
- Drop intel_scu_ipc_io[read|write][8|16]()
- Drop unused macros
- Drop unused prototype intel_scu_ipc_fw_update()
- Sleeping is fine when polling
- Drop intel_scu_ipc_i2c_cntrl()
- Remove Lincroft support
- Add constants for register offsets
- Fix interrupt support
intel_scu_ipcutil:
- Remove default y from Kconfig
intel_telemetry_debugfs:
- Respect error code of kstrtou32_from_user()
intel_telemetry_pltdrv:
- use devm_platform_ioremap_resource()
mlx-platform:
- Add support for next generation systems
- Add support for new capability register
- Add support for new system type
- Set system mux configuration based on system type
- Add more definitions for system attributes
- Cosmetic changes
platform/mellanox:
- mlxreg-hotplug: Add support for new capability register
- fix potential deadlock in the tmfifo driver
tools/power/x86/intel-speed-select:
- Update version
- Change the order for clos disable
- Fix result display for turbo-freq auto mode
- Add support for core-power discovery
- Allow additional core-power mailbox commands
- Update MAINTAINERS for the intel uncore frequency control
- Add support for Uncore frequency control
touchscreen_dmi:
- Fix indentation in several places
- Add info for the PiPO W11 tablet
-----BEGIN PGP SIGNATURE-----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=rMop
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Enable thermal policy for ASUS TUF FX705DY/FX505DY
- Support left round button on ASUS N56VB
- Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
- Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
driver
- Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers
- Touchscreen support for the PiPO W11 tablet
* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
platform/x86: intel_scu_ipc: Drop unused macros
platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
platform/x86: intel_scu_ipc: Sleeping is fine when polling
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
platform/x86: intel_scu_ipc: Remove Lincroft support
platform/x86: intel_scu_ipc: Add constants for register offsets
platform/x86: intel_scu_ipc: Fix interrupt support
platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
...
- Convert to reasonable timeouts for all CMD6 commands (updates for BKOPS,
CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
- Respect f_max clock rate at card initialization
- Add gpiod_toggle_active_low() API
- Consolidate slot-gpio code by using gpiod_toggle_active_low()
MMC host:
- Add pinctrl_select_default_state() API
- Consolidate pintctrl code by using pinctrl_select_default_state()
- mmci: Support any block sizes for SDIO for some variants
- mmci: Enable reset control for stm32_sdmmc
- mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
- renesas_sdhi: Add support for the r8a77961 variant
- renesas_sdhi: A few minor improvements
- rockchip-dw-mshc: Add support for the rk3308 variant
- sdhci: Enable support for external DMA controllers
- sdhci: Fixup error path when sending CMD12
- sdhci-brcmstb: Add support for 7216b0 variant
- sdhci-brcmstb: Add support for command queuing (CQHCI)
- sdhci-brcmstb: Add support for eMMC HS400ES mode
- sdhci-msm: Add support for the sc7180 variant
- sdhci-msm: Add support for command queuing (CQHCI)
- sdhci-of-at91: Add support for the SAM9x60 variant
- sdhci-of-at91: Improve support for tunings
- sdhci-of-esdhc: A few fixups for some clock related issues
- sdhci-omap: Add support for the am335x and the am437x variants
- sdhci-omap: Improve support for erase operations
- sdhci-omap: Add support for external DMA
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAl4uww8XHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjClg8w/+Iv7Emp5oBmj0aY9BA2rWpOVj
rNPynDbRPI0qrrQPqXrZ/UdGDc6lgWHoeHdtv70u8WK8UEgi/OYw7PlE3eij9DGB
VcOnMyDg+Q6+Hq3vjvADWZzNrHGjdvjcGLxx386DHpTCsc1zD3EL2AG5e6i2/dfH
/FiSdfxVtRKw4GEn5jIDhHh63Av8mMCaPPfLw0DKxMQIuJ3atMvplgsr1KXIAydo
QTjKWxDJDJnKddtdHcnjP9Tck+ksrATDHHHQ9qGVFuOr3Yy9TgvOMlLo8vxJ364l
3bIwYfbaeE4/NKvqJGDzIF1jr4R5JoHZhvHLGqr+hUwMzxnwcbyCUSghk87oOqMt
FKAfKqwdEvVyq8QnmV9ArPXRnVmW4ElJN3edTeC00/7MoxWIx2TRHvEO5HejqPkq
+kw0NEIqWWiztV3/aa5zFJtlp8QphwsopvLzwEAJB+1G0tiSiNcfokrJ0AyODC5/
K4kXTGfQh28RSIr6ait7FNphyOug1WAvXqvt3ydY1lQPH0G36DMzLMx06mjgTA4O
DNYXzLoLPzRaPU4NvpHu3/axgRLYCN3CbGdx3U8GT9wgmerRyY/jW9ldSF7w6Wim
W0Zx1j3SdvmgafMXVsFcxMUC0IvfOFiMzXJ6DOus37xTYLRKW40wttg9SSxtm+9E
3IfRRlXnlkHVvTZ1ewI=
=L0cJ
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"There are no updates for the MEMSTICK subsystem this time. But note
that I am also carrying a patch from the pinctrl tree, which has been
shared through an immutable branch.
Summary:
MMC core:
- Convert to reasonable timeouts for all CMD6 commands (updates for
BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
- Respect f_max clock rate at card initialization
- Add gpiod_toggle_active_low() API
- Consolidate slot-gpio code by using gpiod_toggle_active_low()
MMC host:
- Add pinctrl_select_default_state() API
- Consolidate pintctrl code by using pinctrl_select_default_state()
- mmci: Support any block sizes for SDIO for some variants
- mmci: Enable reset control for stm32_sdmmc
- mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
- renesas_sdhi: Add support for the r8a77961 variant
- renesas_sdhi: A few minor improvements
- rockchip-dw-mshc: Add support for the rk3308 variant
- sdhci: Enable support for external DMA controllers
- sdhci: Fixup error path when sending CMD12
- sdhci-brcmstb: Add support for 7216b0 variant
- sdhci-brcmstb: Add support for command queuing (CQHCI)
- sdhci-brcmstb: Add support for eMMC HS400ES mode
- sdhci-msm: Add support for the sc7180 variant
- sdhci-msm: Add support for command queuing (CQHCI)
- sdhci-of-at91: Add support for the SAM9x60 variant
- sdhci-of-at91: Improve support for tunings
- sdhci-of-esdhc: A few fixups for some clock related issues
- sdhci-omap: Add support for the am335x and the am437x variants
- sdhci-omap: Improve support for erase operations
- sdhci-omap: Add support for external DMA"
* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
mmc: sdhci-cadence: remove unneeded 'inline' marker
dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
mmc: sdhci-msm: Add CQHCI support for sdhci-msm
mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
mmc: sdhci-of-esdhc: fix transfer mode register reading
mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
mmc: sdhci-brcmstb: Add shutdown callback
mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
mmc: core: limit probe clock frequency to configured f_max
mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
mmc: sdhci: fix an issue of mixing different types
...
- Make i3c_bus_set_mode() static
* Driver changes:
- Add a per-SoC data_hold_delay property to the Cadence driver
- Fix formatting issues in the 'CADENCE I3C MASTER IP' MAINTAINERS entry
- Use devm_platform_ioremap_resource() where appropriate
- Adjust DesignWare reattach logic
-----BEGIN PGP SIGNATURE-----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=LbKo
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Boris Brezillon:
"Core changes:
- Make i3c_bus_set_mode() static
Driver changes:
- Add a per-SoC data_hold_delay property to the Cadence driver
- Fix formatting issues in the 'CADENCE I3C MASTER IP' MAINTAINERS
entry
- Use devm_platform_ioremap_resource() where appropriate
- Adjust DesignWare reattach logic"
* tag 'i3c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw: reattach device on first available location of address table
i3c: master: cdns: convert to devm_platform_ioremap_resource
i3c: master: dw: convert to devm_platform_ioremap_resource
MAINTAINERS: fix style in CADENCE I3C MASTER IP entry
i3c: master: make i3c_bus_set_mode static
i3c: master: cdns: add data hold delay support
Commit 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") adds support for a new per-test-directory "settings"
file. But this only works for tests not in a sub-subdirectories, e.g.
- tools/testing/selftests/rtc (rtc) is OK,
- tools/testing/selftests/net/mptcp (net/mptcp) is not.
We have to increase the timeout for net/mptcp tests which are not
upstreamed yet but this fix is valid for other tests if they need to add
a "settings" file, see the full list with:
tools/testing/selftests/*/*/**/Makefile
Note that this patch changes the text header message printed at the end
of the execution but this text is modified only for the tests that are
in sub-subdirectories, e.g.
ok 1 selftests: net/mptcp: mptcp_connect.sh
Before we had:
ok 1 selftests: mptcp: mptcp_connect.sh
But showing the full target name is probably better, just in case a
subsubdir has the same name as another one in another subdirectory.
Fixes: 852c8cbf34 (selftests/kselftest/runner.sh: Add 45 second timeout per test)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull x86 microcode update from Borislav Petkov:
"Another boring branch this time around: mark a stub function inline,
by Valdis Kletnieks"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Make stub function static inline
Add device tree binding information for mpq7920 regulator driver.
Example bindings for mpq7920 are added.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200123215338.11109-1-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
