In __bch_bucket_alloc_set() the lines after lable 'err:' indeed do
nothing useful after multiple cache devices are removed from bcache
code. This cleanup patch drops the useless code to save a bit CPU
cycles.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240528120914.28705-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If there are extreme heavy write I/O continuously hit on relative small
cache device (512GB in my testing), it is possible to make counter
c->gc_stats.in_use continue to increase and exceed CUTOFF_CACHE_ADD.
If 'c->gc_stats.in_use > CUTOFF_CACHE_ADD' happens, all following write
requests will bypass the cache device because check_should_bypass()
returns 'true'. Because all writes bypass the cache device, counter
c->sectors_to_gc has no chance to be negative value, and garbage
collection thread won't be waken up even the whole cache becomes clean
after writeback accomplished. The aftermath is that all write I/Os go
directly into backing device even the cache device is clean.
To avoid the above situation, this patch uses a quite conservative way
to fix: if 'c->gc_stats.in_use > CUTOFF_CACHE_ADD' happens, only wakes
up garbage collection thread when the whole cache device is clean.
Before the fix, the writes-always-bypass situation happens after 10+
hours write I/O pressure on 512GB Intel optane memory which acts as
cache device. After this fix, such situation doesn't happen after 36+
hours testing.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240528120914.28705-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, if the gc is running, when the allocator found free_inc
is empty, allocator has to wait the gc finish. Before that, the
IO is blocked.
But actually, there would be some buckets is reclaimable before gc,
and gc will never mark this kind of bucket to be unreclaimable.
So we can put these buckets into free_inc in gc running to avoid
IO being blocked.
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240528120914.28705-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't stuff the values directly into the queue without any
synchronization, but instead delay applying the queue limits in
the caller and let dm_set_zones_restrictions work on the limit
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240527123634.1116952-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fold it into the only caller in preparation to changes in the
queue limits setup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240527123634.1116952-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keep it together with the rest of the zoned code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240527123634.1116952-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
queue_limits_set() without DM core and targets first being updated
to set (and stack) discard limits in terms of max_hw_discard_sectors
and not max_discard_sectors.
- Fix stable@ DM integrity discard support to set device's
discard_granularity limit to the device's logical block size.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmZMv3kACgkQxSPxCi2d
A1pX2gf+NjaTP+6otMJ44sYwUGHuWtgwDy7NcoTiF4RvLQjjrUh8Lgm2p3i4evFs
4AzMNXy5V6/mEx/AZb7sjCtPkIGOykkBud3+jhStohQKvXEJQcYtwACNv151NW2c
Fw2tcPZbPKH8P8UkDkegLaCu+4DotYjhuw44dfHFVZ95Wlhcm2UmcjWQEf/LtYW0
Si2FE0z2n1yi1mY6cExuL0bJ+LaMrXRQzHE3ZPaPRn4PFNUTY1juKsHYbgyL7cZ+
xQM1W/KBrKzDztCJGKH4Cl86L3kNPRkiQ7BQ/2Wtse20o10EGT0+lPvevCNcPNpi
gbjAo7OPy9WPA9N/AR8Wfj06YQFaGA==
=Pp+x
-----END PGP SIGNATURE-----
Merge tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM discard regressions due to DM core switching over to using
queue_limits_set() without DM core and targets first being updated to
set (and stack) discard limits in terms of max_hw_discard_sectors and
not max_discard_sectors
- Fix stable@ DM integrity discard support to set device's
discard_granularity limit to the device's logical block size
* tag 'for-6.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: always manage discard support in terms of max_hw_discard_sectors
dm-integrity: set discard_granularity to logical block size
Replacement of bdev->bd_inode with sane(r) set of primitives.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkwjlgAKCRBZ7Krx/gZQ
66OmAP9nhZLASn/iM2+979I6O0GW+vid+uLh48uW3d+LbsmVIgD9GYpR+cuLQ/xj
mJESWfYKOVSpFFSrqlzKg9PQlU/GFgs=
=6LRp
-----END PGP SIGNATURE-----
Merge tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bdev bd_inode updates from Al Viro:
"Replacement of bdev->bd_inode with sane(r) set of primitives by me and
Yu Kuai"
* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RIP ->bd_inode
dasd_format(): killing the last remaining user of ->bd_inode
nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
block/bdev.c: use the knowledge of inode/bdev coallocation
gfs2: more obvious initializations of mapping->host
fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
grow_dev_folio(): we only want ->bd_inode->i_mapping there
use ->bd_mapping instead of ->bd_inode->i_mapping
block_device: add a pointer to struct address_space (page cache of bdev)
missing helpers: bdev_unhash(), bdev_drop()
block: move two helpers into bdev.c
block2mtd: prevent direct access of bd_inode
dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
blkdev_write_iter(): saner way to get inode and bdev
bcachefs: remove dead function bdev_sectors()
ext4: remove block_device_ejected()
erofs_buf: store address_space instead of inode
erofs: switch erofs_bread() to passing offset instead of block number
to struct file * and verifying that caller has device
opened exclusively.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkwkfQAKCRBZ7Krx/gZQ
62C3AQDW5vuXNx2+KDPma5YStjFpPLC0xtSyAS5D3YANjtyRFgD/TOcCarq7rvBt
KubxHVFsfW+eu6ASeaoMRB83w5OIzwk=
=Liix
-----END PGP SIGNATURE-----
Merge tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs blocksize updates from Al Viro:
"This gets rid of bogus set_blocksize() uses, switches it over
to be based on a 'struct file *' and verifies that the caller
has the device opened exclusively"
* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make set_blocksize() fail unless block device is opened exclusive
set_blocksize(): switch to passing struct file *
btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
swsusp: don't bother with setting block size
zram: don't bother with reopening - just use O_EXCL for open
swapon(2): open swap with O_EXCL
swapon(2)/swapoff(2): don't bother with block size
pktcdvd: sort set_blocksize() calls out
bcache_register(): don't bother with set_blocksize()
Commit 4f563a6473 ("block: add a max_user_discard_sectors queue
limit") changed block core to set max_discard_sectors to:
min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors)
Since commit 1c0e720228 ("dm: use queue_limits_set") it was reported
dm-thinp was failing in a few fstests (generic/347 and generic/405)
with the first WARN_ON_ONCE in dm_cell_key_has_valid_range() being
reported, e.g.:
WARNING: CPU: 1 PID: 30 at drivers/md/dm-bio-prison-v1.c:128 dm_cell_key_has_valid_range+0x3d/0x50
blk_set_stacking_limits() sets max_user_discard_sectors to UINT_MAX,
so given how block core now sets max_discard_sectors (detailed above)
it follows that blk_stack_limits() stacks up the underlying device's
max_hw_discard_sectors and max_discard_sectors is set to match it. If
max_hw_discard_sectors exceeds dm's BIO_PRISON_MAX_RANGE, then
dm_cell_key_has_valid_range() will trigger the warning with:
WARN_ON_ONCE(key->block_end - key->block_begin > BIO_PRISON_MAX_RANGE)
Aside from this warning, the discard will fail. Fix this and other DM
issues by governing discard support in terms of max_hw_discard_sectors
instead of max_discard_sectors.
Reported-by: Theodore Ts'o <tytso@mit.edu>
Fixes: 1c0e720228 ("dm: use queue_limits_set")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm-integrity could set discard_granularity lower than the logical block
size. This could result in failures when sending discard requests to
dm-integrity.
This fix is needed for kernels prior to 6.10.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Eric Wheeler <linux-integrity@lists.ewheeler.net>
Cc: stable@vger.kernel.org # <= 6.9
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
workqueues to use WQ_HIGHPRI.
- Export dm-crypt workqueues via sysfs (by enabling WQ_SYSFS) to allow
for improved visibility and controls over IO and crypt workqueues.
- Fix dm-crypt to no longer constrain max_segment_size to PAGE_SIZE.
This limit isn't needed given that the block core provides late bio
splitting if bio exceeds underlying limits (e.g. max_segment_size).
- Fix dm-crypt crypt_queue's use of WQ_UNBOUND to not use
WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND.
- Fix various issues with dm-delay target (ranging from a resource
teardown fix, a fix for hung task when using kthread mode, and other
improvements that followed from code inspection).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmZDiggACgkQxSPxCi2d
A1oQrwf7BUHy7ehwCjRrVlFTteIlx0ULTpPxictakN/S+xZfcZUcbE20OjNVzdk9
m5dx4Gn557rlMkiC4NDlHazVEVM5BbTpih27rvUgvX2nchUUdfHIT1OvU0isT4Yi
h9g/o7i9DnBPjvyNjpXjP9YE7Xg8u2X9mxpv8DyU5M+QpFuofwzsfkCP7g14B0g2
btGxT3AZ5Bo8A/csKeSqHq13Nbq/dcAZZ3IvjIg1xSXjm6CoQ04rfO0TN6SKfsFJ
GXteBS2JT1MMcXf3oKweAeQduTE+psVFea7gt/8haKFldnV+DpPNg1gU/7rza5Os
eL1+L1iPY5fuEJIkaqPjBVRGkxQqHg==
=+OhH
-----END PGP SIGNATURE-----
Merge tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add a dm-crypt optional "high_priority" flag that enables the crypt
workqueues to use WQ_HIGHPRI.
- Export dm-crypt workqueues via sysfs (by enabling WQ_SYSFS) to allow
for improved visibility and controls over IO and crypt workqueues.
- Fix dm-crypt to no longer constrain max_segment_size to PAGE_SIZE.
This limit isn't needed given that the block core provides late bio
splitting if bio exceeds underlying limits (e.g. max_segment_size).
- Fix dm-crypt crypt_queue's use of WQ_UNBOUND to not use
WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND.
- Fix various issues with dm-delay target (ranging from a resource
teardown fix, a fix for hung task when using kthread mode, and other
improvements that followed from code inspection).
* tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-delay: remove timer_lock
dm-delay: change locking to avoid contention
dm-delay: fix max_delay calculations
dm-delay: fix hung task introduced by kthread mode
dm-delay: fix workqueue delay_timer race
dm-crypt: don't set WQ_CPU_INTENSIVE for WQ_UNBOUND crypt_queue
dm: use queue_limits_set
dm-crypt: stop constraining max_segment_size to PAGE_SIZE
dm-crypt: export sysfs of all workqueues
dm-crypt: add the optional "high_priority" flag
-----BEGIN PGP SIGNATURE-----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=HnjE
-----END PGP SIGNATURE-----
Merge tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- Add a partscan attribute in sysfs, fixing an issue with systemd
relying on an internal interface that went away.
- Attempt #2 at making long running discards interruptible. The
previous attempt went into 6.9, but we ended up mostly reverting it
as it had issues.
- Remove old ida_simple API in bcache
- Support for zoned write plugging, greatly improving the performance
on zoned devices.
- Remove the old throttle low interface, which has been experimental
since 2017 and never made it beyond that and isn't being used.
- Remove page->index debugging checks in brd, as it hasn't caught
anything and prepares us for removing in struct page.
- MD pull request from Song
- Don't schedule block workers on isolated CPUs
* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
blk-throttle: delay initialization until configuration
blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
block: fix that util can be greater than 100%
block: support to account io_ticks precisely
block: add plug while submitting IO
bcache: fix variable length array abuse in btree_iter
bcache: Remove usage of the deprecated ida_simple_xx() API
md: Revert "md: Fix overflow in is_mddev_idle"
blk-lib: check for kill signal in ioctl BLKDISCARD
block: add a bio_await_chain helper
block: add a blk_alloc_discard_bio helper
block: add a bio_chain_and_submit helper
block: move discard checks into the ioctl handler
block: remove the discard_granularity check in __blkdev_issue_discard
block/ioctl: prefer different overflow check
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
block: fix and simplify blkdevparts= cmdline parsing
block: refine the EOF check in blkdev_iomap_begin
block: add a partscan sysfs attribute for disks
block: add a disk_has_partscan helper
...
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Instead of manually checking the timer details in queue_timeout(), call
timer_reduce() to start the timer or reduce the expiration time. This
avoids needing a lock.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The delayed_bios list is protected by one mutex shared by all dm-delay
devices. This mutex must be held whenever a bio is added or expired bios
are removed from the list. Since a large number of expired bios could
be on the list, flush_delayed_bios() can schedule while holding the
mutex. This means a flush_delayed_bios() call on any dm-delay device can
slow down delay_map() calls on any other dm-delay device.
To keep dm-delay devices from slowing each other down and keep
processing delay bios from slowing adding delayed bios, the global mutex
has been removed, and each dm-delay device now has two locks.
delayed_bios_lock is a spinlock that must be held whenever the
delayed_bios list is accessed. process_bios_lock is a mutex that must be
held whenever a process has temporarily pulled bios off the delayed_bios
list to check which ones should be processed. It must be held until all
the bios that won't be processed are returned to the list. This is what
flush_delayed_bios() now does. The mutex is necessary to guarantee that
delay_presuspend() sees the entire list of delayed bios when it calls
flush_delayed_bios().
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
delay_ctr() pointlessly compared max_delay in cases where multiple delay
classes were initialized identically. Also, when write delays were
configured different than read delays, delay_ctr() never compared their
value against max_delay. Fix these issues.
Fixes: 70bbeb29fa ("dm delay: for short delays, use kthread instead of timers and wq")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If the worker thread is not woken due to a bio, then it is not woken at
all. This causes the hung task check to trigger. This occurs, for
instance, when no bios are submitted. Also when a delay of 0 is
configured, delay_bio() returns without waking the worker.
Prevent the hung task check from triggering by creating the thread with
kthread_run() instead of using kthread_create() directly.
Fixes: 70bbeb29fa ("dm delay: for short delays, use kthread instead of timers and wq")
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
delay_timer could be pending when delay_dtr() is called. It needs to be
shut down before kdelayd_wq is destroyed, so it won't try queueing more
work to kdelayd_wq while that's getting destroyed.
Also the del_timer_sync() call in delay_presuspend() doesn't protect
against the timer getting immediately rearmed by the queued call to
flush_delayed_bios(), but there's no real harm if that does happen.
timer_delete() is less work, and is basically just as likely to stop a
pointless call to flush_delayed_bios().
Fixes: 26b9f22870 ("dm: delay target")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
btree_iter is used in two ways: either allocated on the stack with a
fixed size MAX_BSETS, or from a mempool with a dynamic size based on the
specific cache set. Previously, the struct had a fixed-length array of
size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized
iterators, which causes UBSAN to complain.
This patch uses the same approach as in bcachefs's sort_iter and splits
the iterator into a btree_iter with a flexible array member and a
btree_iter_stack which embeds a btree_iter as well as a fixed-length
data array.
Cc: stable@vger.kernel.org
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039368
Signed-off-by: Matthew Mirvish <matthew@mm12.xyz>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240509011117.2697-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240509011117.2697-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 3f9f231236.
Using 64bit for 'sync_io' is unnecessary from the gendisk side. This
overflow will not cause any functional impact, except for a UBSAN
warning. Solving this overflow requires introducing additional
calculations and checks which are not necessary. So just keep using
32bit for 'sync_io'.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240507023103.781816-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
going to be faster, actually - shift is cheaper than dereference...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240411145346.2516848-9-viro@zeniv.linux.org.uk
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Is is reported that for dm-raid10, lvextend + lvchange --syncaction will
trigger following softlockup:
kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976]
CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1
RIP: 0010:_raw_spin_unlock_irq+0x13/0x30
Call Trace:
<TASK>
md_bitmap_start_sync+0x6b/0xf0
raid10_sync_request+0x25c/0x1b40 [raid10]
md_do_sync+0x64b/0x1020
md_thread+0xa7/0x170
kthread+0xcf/0x100
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1a/0x30
And the detailed process is as follows:
md_do_sync
j = mddev->resync_min
while (j < max_sectors)
sectors = raid10_sync_request(mddev, j, &skipped)
if (!md_bitmap_start_sync(..., &sync_blocks))
// md_bitmap_start_sync set sync_blocks to 0
return sync_blocks + sectors_skippe;
// sectors = 0;
j += sectors;
// j never change
Root cause is that commit 301867b1c1 ("md/raid10: check
slab-out-of-bounds in md_bitmap_get_counter") return early from
md_bitmap_get_counter(), without setting returned blocks.
Fix this problem by always set returned blocks from
md_bitmap_get_counter"(), as it used to be.
Noted that this patch just fix the softlockup problem in kernel, the
case that bitmap size doesn't match array size still need to be fixed.
Fixes: 301867b1c1 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter")
Reported-and-tested-by: Nigel Croxon <ncroxon@redhat.com>
Closes: https://lore.kernel.org/all/71ba5272-ab07-43ba-8232-d2da642acb4e@redhat.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240422065824.2516-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
We are not using __bread() anymore and read_cache_page_gfp() doesn't
care about block size. Moreover, we should *not* change block
size on a device that is currently held exclusive - filesystems
that use buffer cache expect the block numbers to be interpreted
in units set by filesystem.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
ACKed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a ("bpf: verifier: prevent userspace memory access")
d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using targets such as dm-linear, a mapped device can be created to
contain only conventional zones. Such device should not be treated as
zoned as it does not contain any mandatory sequential write required
zone. Since such device can be randomly written, we can modify
dm_set_zones_restrictions() to set the mapped device zoned queue limit
to false to expose it as a regular block device. The function
dm_check_zoned() does this after counting the number of conventional
zones of the mapped device and comparing it to the total number of zones
reported. The special dm_check_zoned_cb() report zones callback function
is used to count conventional zones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Link: https://lore.kernel.org/r/20240501110907.96950-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
synchronously by default. Asynchronous removal has always been
possible but it isn't the default. It is important that synchronous
removal be preserved, otherwise it is an interface change that
breaks lvm2.
- Remove errant semicolon in drivers/md/dm-vdo/murmurhash3.c
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmYr08wACgkQxSPxCi2d
A1qSXAgAsmfo5nV8/tNsrG3aBYN/rbGyEQaKl+m3eGK3T874WyrbW/On5qfGzEO1
09O5jNEMhkEHBQq6tKu/Gp87xLVJroIOMLTYpmCg6nnlwVIifFy1uuaBFA1xgM9U
xf7myg6fRj66Yjwv0y1WmTaQTX30s9alJ7f/PZQT1MJFhGIuHPIns3bsyZ43RcOl
pNkS9jjdHkDpXK/cWseb9mz6TAISa8Fn2NYkDPvq6r/J/aIxhRiHlhlzFuQnnfkH
Rg5GVg2R/yCZiGQpuA6IqfEX6eqc4HlZa5Ty2zj9BjUhmj+YbuLEKj+uMEB6wMPd
uK7uWfkxZYvsBAdaFfSpU8XyTumaAA==
=zK77
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix 6.9 regression so that DM device removal is performed
synchronously by default.
Asynchronous removal has always been possible but it isn't the
default. It is important that synchronous removal be preserved,
otherwise it is an interface change that breaks lvm2.
- Remove errant semicolon in drivers/md/dm-vdo/murmurhash3.c
* tag 'for-6.9/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: restore synchronous close of device mapper block device
dm vdo murmurhash: remove unneeded semicolon
Pull MD fixes from Song:
"These changes contain various fixes by Yu Kuai, Li Nan, and
Florian-Ewald Mueller."
* tag 'md-6.10-20240425' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: don't account sync_io if iostats of the disk is disabled
md: Fix overflow in is_mddev_idle
md: add check for sleepers in md_wakeup_thread()
md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING
Fix crypt_queue's use of WQ_UNBOUND to _not_ use WQ_CPU_INTENSIVE
because it is meaningless with WQ_UNBOUND.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Use queue_limits_set which validates the limits and takes care of
updating the readahead settings instead of directly assigning them to
the queue. For that make sure all limits are actually updated before
the assignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This change effectively reverts commit 586b286b11 ("dm crypt:
constrain crypt device's max_segment_size to PAGE_SIZE") and relies on
block core's late bio-splitting to ensure that dm-crypt's encryption
bios are split accordingly if they exceed the underlying device's
limits (e.g. max_segment_size).
Commit 586b286b11 was applied as a 4.3 fix for the benefit of
stable@ kernels 4.0+ just after block core's late bio-splitting was
introduced in 4.3 with commit 54efd50bfd ("block: make
generic_make_request handle arbitrarily sized bios"). Given block
core's late bio-splitting it is past time that dm-crypt make use of
it.
Also, given the recent need to revert meaningful progress that was
attempted during the 6.9 merge window (see commit bff4b74625 Revert
"dm: use queue_limits_set") this change allows DM core to safely make
use of queue_limits_set() without risk of breaking dm-crypt on NVMe.
Though it should be noted this commit isn't a prereq for reinstating
DM core's use of queue_limits_set() because blk_validate_limits() was
made less strict with commit b561ea56a2 ("block: allow device to
have both virt_boundary_mask and max segment size").
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The only user of blk_revalidate_disk_zones() second argument was the
SCSI disk driver (sd). Now that this driver does not require this
update_driver_data argument, remove it to simplify the interface of
blk_revalidate_disk_zones(). Also update the function kdoc comment to
be more accurate (i.e. there is no gendisk ->revalidate method).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-21-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For targets requiring zone append operation emulation with regular
writes (e.g. dm-crypt), we can use the block layer emulation provided by
zone write plugging. Remove DM implemented zone append emulation and
enable the block layer one.
This is done by setting the max_zone_append_sectors limit of the
mapped device queue to 0 for mapped devices that have a target table
that cannot support native zone append operations (e.g. dm-crypt).
Such mapped devices are flagged with the DMF_EMULATE_ZONE_APPEND flag.
dm_split_and_process_bio() is modified to execute
blk_zone_write_plug_bio() for such device to let the block layer
transform zone append operations into regular writes. This is done
after ensuring that the submitted BIO is split if it straddles zone
boundaries. Both changes are implemented unsing the inline helpers
dm_zone_write_plug_bio() and dm_zone_bio_needs_split() respectively.
dm_revalidate_zones() is also modified to use the block layer provided
function blk_revalidate_disk_zones() so that all zone resources needed
for zone append emulation are initialized by the block layer without DM
core needing to do anything. Since the device table is not yet live when
dm_revalidate_zones() is executed, enabling the use of
blk_revalidate_disk_zones() requires adding a pointer to the device
table in struct mapped_device. This avoids errors in
dm_blk_report_zones() trying to get the table with dm_get_live_table().
The mapped device table pointer is set to the table passed as argument
to dm_revalidate_zones() before calling blk_revalidate_disk_zones() and
reset to NULL after this function returns to restore the live table
handling for user call of report zones.
All the code related to zone append emulation is removed from
dm-zone.c. This leads to simplifications of the functions __map_bio()
and dm_zone_endio(). This later function now only needs to deal with
completions of real zone append operations for targets that support it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-13-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Once there is a heavy IO load, so many encrypt/decrypt work will occupy
all of the cpu, which may lead to the poor performance for other service.
So the improved visibility and controls over dm-crypt workqueues, as
was offered with commit a2b8b2d975 ("dm crypt: export sysfs of
kcryptd workqueue"), seems necessary. By exporting dm-crypt's
workqueues in sysfs, the entry like cpumask/max_active and so on can
help us to limit the CPU usage for encrypt/decrypt work.
However, commit a2b8b2d975 did not consider that DM table reload
will call .ctr before .dtr, so the reload for dm-crypt failed because
the same sysfs name was present. This was the original need for commit
48b0777cd9 ("Revert "dm crypt: export sysfs of kcryptd workqueue"").
Reintroduce the use of WQ_SYSFS, and use it for both the IO and crypt
workqueues, but make the workqueue names include a unique id (via ida)
to allow both old and new sysfs entries to coexist.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
When WQ_HIGHPRI was used for the dm-crypt kcryptd workqueue it was
reported that dm-crypt performs badly when the system is loaded[1].
Because of reports of audio skipping, dm-crypt stopped using
WQ_HIGHPRI with commit f612b2132d (Revert "dm crypt: use WQ_HIGHPRI
for the IO and crypt workqueues").
But it has since been determined that WQ_HIGHPRI provides improved
performance (with reduced latency) for highend systems with much more
resources than those laptop/desktop users which suffered from the use
of WQ_HIGHPRI.
As such, add an option "high_priority" that allows the use of
WQ_HIGHPRI for dm-crypt's workqueues and also sets the write_thread to
nice level MIN_NICE (-20). This commit makes it optional, so that
normal users won't be harmed by it.
[1] https://listman.redhat.com/archives/dm-devel/2023-February/053410.html
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
'dmsetup remove' and 'dmsetup remove_all' require synchronous bdev
release. Otherwise dm_lock_for_deletion() may return -EBUSY if the open
count is > 0, because the open count is dropped in dm_blk_close()
which occurs after fput() completes.
So if dm_blk_close() is delayed because of asynchronous fput(), this
device mapper device is skipped during remove, which is a regression.
Fix the issue by using __fput_sync().
Also, DM device removal has long supported being made asynchronous by
setting the DMF_DEFERRED_REMOVE flag on the DM device. So leverage
using async fput() in close_table_device() if DMF_DEFERRED_REMOVE flag
is set.
Reported-by: Zhong Changhui <czhong@redhat.com>
Fixes: a28d893eb3 ("md: port block device access to file")
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[snitzer: editted commit header, use fput() if DMF_DEFERRED_REMOVE set]
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If iostats is disabled, disk_stats will not be updated and
part_stat_read_accum() only returns a constant value. In this case,
continuing to count sync_io and to check is_mddev_idle() is no longer
meaningful.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240117031946.2324519-3-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
UBSAN reports this problem:
UBSAN: Undefined behaviour in drivers/md/md.c:8175:15
signed integer overflow:
-2147483291 - 2072033152 cannot be represented in type 'int'
Call trace:
dump_backtrace+0x0/0x310
show_stack+0x28/0x38
dump_stack+0xec/0x15c
ubsan_epilogue+0x18/0x84
handle_overflow+0x14c/0x19c
__ubsan_handle_sub_overflow+0x34/0x44
is_mddev_idle+0x338/0x3d8
md_do_sync+0x1bb8/0x1cf8
md_thread+0x220/0x288
kthread+0x1d8/0x1e0
ret_from_fork+0x10/0x18
'curr_events' will overflow when stat accum or 'sync_io' is greater than
INT_MAX.
Fix it by changing sync_io, last_events and curr_events to 64bit.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240117031946.2324519-2-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Check for sleeping thread before attempting its wake_up in
md_wakeup_thread() to avoid unnecessary spinlock contention.
With a 6.1 kernel, fio random read/write tests on many (>= 100)
virtual volumes, of 100 GiB each, on 3 md-raid5s on 8 SSDs each
(building a raid50), show by 3 to 4 % improved IOPS performance.
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20240327114022.74634-1-jinpu.wang@ionos.com
Signed-off-by: Song Liu <song@kernel.org>
Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with
small possibility, the root cause is exactly the same as commit
bed9e27baf ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
However, Dan reported another hang after that, and junxiao investigated
the problem and found out that this is caused by plugged bio can't issue
from raid5d().
Current implementation in raid5d() has a weird dependence:
1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear
MD_SB_CHANGE_PENDING;
2) raid5d() handles IO in a deadloop, until all IO are issued;
3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared;
This behaviour is introduce before v2.6, and for consequence, if other
context hold 'reconfig_mutex', and md_check_recovery() can't update
super_block, then raid5d() will waste one cpu 100% by the deadloop, until
'reconfig_mutex' is released.
Refer to the implementation from raid1 and raid10, fix this problem by
skipping issue IO if MD_SB_CHANGE_PENDING is still set after
md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex'
is released. Meanwhile, the hang problem will be fixed as well.
Fixes: 5e2cf333b7 ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Reported-and-tested-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/all/20240123005700.9302-1-dan@danm.net/
Investigated-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240322081005.1112401-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Pull MD fix from Song:
"This change, by Yu Kuai, fixes a UAF in a corner case."
* tag 'md-6.9-20240408' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
raid1: fix use-after-free for original bio in raid1_write_request()
Use bio_list_merge_init instead of open coding bio_list_merge and
bio_list_init.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240328084147.2954434-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
