Prior to 4832c30d54 ("net: ipv6: put host and anycast routes on device
with address") host routes and anycast routes were installed with the
device set to loopback (or VRF device once that feature was added). In the
older code dst.dev was set to loopback (needed for packet tx) and rt6i_idev
was used to denote the actual interface.
Commit 4832c30d54 changed the code to have dst.dev pointing to the real
device with the switch to lo or vrf device done on dst clones. As a
consequence of this change a couple of device checks during route lookups
are no longer needed. Remove them.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
aca_idev has only 1 user - inet6_fill_ifacaddr - and it only
wants the device index which can be extracted from the fib6_info
nexthop.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
addrconf_dst_alloc now returns a fib6_info. Update the name
and its users to reflect the change.
Rename only; no functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the prefix for fib6_info struct elements from rt6i_ to fib6_.
rt6i_pcpu and rt6i_exception_bucket are left as is given that they
point to rt6_info entries.
Rename only; not functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lockdep does not know that the locks used by IPv4 defrag
and IPv6 reassembly units are of different classes.
It complains because of following chains :
1) sch_direct_xmit() (lock txq->_xmit_lock)
dev_hard_start_xmit()
xmit_one()
dev_queue_xmit_nit()
packet_rcv_fanout()
ip_check_defrag()
ip_defrag()
spin_lock() (lock frag queue spinlock)
2) ip6_input_finish()
ipv6_frag_rcv() (lock frag queue spinlock)
ip6_frag_queue()
icmpv6_param_prob() (lock txq->_xmit_lock at some point)
We could add lockdep annotations, but we also can make sure IPv6
calls icmpv6_param_prob() only after the release of the frag queue spinlock,
since this naturally makes frag queue spinlock a leaf in lock hierarchy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop unneeded elements from rt6_info struct and rearrange layout to
something more relevant for the data path.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert all code paths referencing a FIB entry from
rt6_info to fib6_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Last step before flipping the data type for FIB entries:
- use fib6_info_alloc to create FIB entries in ip6_route_info_create
and addrconf_dst_alloc
- use fib6_info_release in place of dst_release, ip6_rt_put and
rt6_release
- remove the dst_hold before calling __ip6_ins_rt or ip6_del_rt
- when purging routes, drop per-cpu routes
- replace inc and dec of rt6i_ref with fib6_info_hold and fib6_info_release
- use rt->from since it points to the FIB entry
- drop references to exception bucket, fib6_metrics and per-cpu from
dst entries (those are relevant for fib entries only)
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add fib6_info struct and alloc, destroy, hold and release helpers.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 FIB will only contain FIB entries with exception routes added to
the FIB entry. Once this transformation is complete, FIB lookups will
return a fib6_info with the lookup functions still returning a dst
based rt6_info. The current code uses rt6_info for both paths and
overloads the rt6_info variable usually called 'rt'.
This patch introduces a new 'f6i' variable name for the result of the FIB
lookup and keeps 'rt' as the dst based return variable. 'f6i' becomes a
fib6_info in a later patch which is why it is introduced as f6i now;
avoids the additional churn in the later patch.
In addition, remove RTF_CACHE and dst checks from fib6 add and delete
since they can not happen now and will never happen after the data
type flip.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most FIB entries can be added using memory allocated with GFP_KERNEL.
Add gfp_flags to ip6_route_add and addrconf_dst_alloc. Code paths that
can be reached from the packet path (e.g., ndisc and autoconfig) or
atomic notifiers use GFP_ATOMIC; paths from user context (adding
addresses and routes) use GFP_KERNEL.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The router discovery code has a FIB entry and wants to validate the
gateway has a neighbor entry. Refactor the existing dst_neigh_lookup
for IPv6 and create a new function that takes the gateway and device
and returns a neighbor entry. Use the new function in
ndisc_router_discovery to validate the gateway.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Continuing to wean FIB paths off of dst_entry, use a bool to hold
requests for certain dst settings. Add a helper to convert the
flags to DST flags when a FIB entry is converted to a dst_entry.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_pol_route_lookup is the lookup function for ip6_route_lookup and
rt6_lookup. At the moment it returns either a reference to a FIB entry
or a cached exception. To move FIB entries to a separate struct, this
lookup function needs to convert FIB entries to an rt6_info that is
returned to the caller.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_null_entry will stay a dst based return for lookups that fail to
match an entry.
Add a new fib6_null_entry which constitutes the root node and leafs
for fibs. Replace existing references to ip6_null_entry with the
new fib6_null_entry when dealing with FIBs.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add expires to rt6_info for FIB entries, and add fib6 helpers to
manage it. Data path use of dst.expires remains.
The transition is fairly straightforward: when working with fib entries,
rt->dst.expires is just rt->expires, rt6_clean_expires is replaced with
fib6_clean_expires, rt6_set_expires becomes fib6_set_expires, and
rt6_check_expired becomes fib6_check_expired, where the fib6 versions
are added by this patch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to IPv4, add fib metrics to the fib struct, which at the moment
is rt6_info. Will be moved to fib6_info in a later patch. Copy metrics
into dst by reference using refcount.
To make the transition:
- add dst_metrics to rt6_info. Default to dst_default_metrics if no
metrics are passed during route add. No need for a separate pmtu
entry; it can reference the MTU slot in fib6_metrics
- ip6_convert_metrics allocates memory in the FIB entry and uses
ip_metrics_convert to copy from netlink attribute to metrics entry
- the convert metrics call is done in ip6_route_info_create simplifying
the route add path
+ fib6_commit_metrics and fib6_copy_metrics and the temporary
mx6_config are no longer needed
- add fib6_metric_set helper to change the value of a metric in the
fib entry since dst_metric_set can no longer be used
- cow_metrics for IPv6 can drop to dst_cow_metrics_generic
- rt6_dst_from_metrics_check is no longer needed
- rt6_fill_node needs the FIB entry and dst as separate arguments to
keep compatibility with existing output. Current dst address is
renamed to dest.
(to be consistent with IPv4 rt6_fill_node really should be split
into 2 functions similar to fib_dump_info and rt_fill_info)
- rt6_fill_node no longer needs the temporary metrics variable
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Defer setting dst input, output and error until fib entry is copied.
The reject path from ip6_route_info_create is moved to a new function
ip6_rt_init_dst_reject with a helper doing the conversion from fib6_type
to dst error.
The remainder of the new ip6_rt_init_dst is an amalgamtion of dst code
from addrconf_dst_alloc and the non-reject path of ip6_route_info_create.
The dst output function is always ip6_output and the input function is
either ip6_input (local routes), ip6_mc_input (multicast routes) or
ip6_forward (anything else).
A couple of places using dst.error are updated to look at rt6i_flags.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce fib6_nh structure and move nexthop related data from
rt6_info and rt6_info.dst to fib6_nh. References to dev, gateway or
lwtstate from a FIB lookup perspective are converted to use fib6_nh;
datapath references to dst version are left as is.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RTN_ type for IPv6 FIB entries is currently embedded in rt6i_flags
and dst.error. Since dst is going to be removed, it can no longer be
relied on for FIB dumps so save the route type as fib6_type.
fc_type is set in current users based on the algorithm in rt6_fill_node:
- rt6i_flags contains RTF_LOCAL: fc_type = RTN_LOCAL
- rt6i_flags contains RTF_ANYCAST: fc_type = RTN_ANYCAST
- else fc_type = RTN_UNICAST
Similarly, fib6_type is set in the rt6_info templates based on the
RTF_REJECT section of rt6_fill_node converting dst.error to RTN type.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass network namespace reference into route add, delete and get
functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass net namespace to fib6_update_sernum. It can not be marked const
as fib6_new_sernum will change ipv6.fib6_sernum.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send a netlink notification when userspace adds a manually configured
address if DAD is enabled and optimistic flag isn't set.
Moreover send RTM_DELADDR notifications for tentative addresses.
Some userspace applications (e.g. NetworkManager) are interested in
addr netlink events albeit the address is still in tentative state,
however events are not sent if DAD process is not completed.
If the address is added and immediately removed userspace listeners
are not notified. This behaviour can be easily reproduced by using
veth interfaces:
$ ip -b - <<EOF
> link add dev vm1 type veth peer name vm2
> link set dev vm1 up
> link set dev vm2 up
> addr add 2001:db8:a🅱️1:2:3:4/64 dev vm1
> addr del 2001:db8:a🅱️1:2:3:4/64 dev vm1
EOF
This patch reverts the behaviour introduced by the commit f784ad3d79
("ipv6: do not send RTM_DELADDR for tentative addresses")
Suggested-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The statistics such as InHdrErrors should be counted on the ingress
netdev rather than on the dev from the dst, which is the egress.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF core gets access to __inet6_bind via ipv6_bpf_stub_impl, so it is
not invoked directly outside of af_inet6.c. Make it static and move
inet6_bind after to avoid forward declaration.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some networks can make sure TCP payload can exactly fit 4KB pages,
with well chosen MSS/MTU and architectures.
Implement mmap() system call so that applications can avoid
copying data without complex splice() games.
Note that a successful mmap( X bytes) on TCP socket is consuming
bytes, as if recvmsg() has been done. (tp->copied += X)
Only PROT_READ mappings are accepted, as skb page frags
are fundamentally shared and read only.
If tcp_mmap() finds data that is not a full page, or a patch of
urgent data, -EINVAL is returned, no bytes are consumed.
Application must fallback to recvmsg() to read the problematic sequence.
mmap() wont block, regardless of socket being in blocking or
non-blocking mode. If not enough bytes are in receive queue,
mmap() would return -EAGAIN, or -EIO if socket is in a state
where no other bytes can be added into receive queue.
An application might use SO_RCVLOWAT, poll() and/or ioctl( FIONREAD)
to efficiently use mmap()
On the sender side, MSG_EOR might help to clearly separate unaligned
headers and 4K-aligned chunks if necessary.
Tested:
mlx4 (cx-3) 40Gbit NIC, with tcp_mmap program provided in following patch.
MTU set to 4168 (4096 TCP payload, 40 bytes IPv6 header, 32 bytes TCP header)
Without mmap() (tcp_mmap -s)
received 32768 MB (0 % mmap'ed) in 8.13342 s, 33.7961 Gbit,
cpu usage user:0.034 sys:3.778, 116.333 usec per MB, 63062 c-switches
received 32768 MB (0 % mmap'ed) in 8.14501 s, 33.748 Gbit,
cpu usage user:0.029 sys:3.997, 122.864 usec per MB, 61903 c-switches
received 32768 MB (0 % mmap'ed) in 8.11723 s, 33.8635 Gbit,
cpu usage user:0.048 sys:3.964, 122.437 usec per MB, 62983 c-switches
received 32768 MB (0 % mmap'ed) in 8.39189 s, 32.7552 Gbit,
cpu usage user:0.038 sys:4.181, 128.754 usec per MB, 55834 c-switches
With mmap() on receiver (tcp_mmap -s -z)
received 32768 MB (100 % mmap'ed) in 8.03083 s, 34.2278 Gbit,
cpu usage user:0.024 sys:1.466, 45.4712 usec per MB, 65479 c-switches
received 32768 MB (100 % mmap'ed) in 7.98805 s, 34.4111 Gbit,
cpu usage user:0.026 sys:1.401, 43.5486 usec per MB, 65447 c-switches
received 32768 MB (100 % mmap'ed) in 7.98377 s, 34.4296 Gbit,
cpu usage user:0.028 sys:1.452, 45.166 usec per MB, 65496 c-switches
received 32768 MB (99.9969 % mmap'ed) in 8.01838 s, 34.281 Gbit,
cpu usage user:0.02 sys:1.446, 44.7388 usec per MB, 65505 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Applications might use SO_RCVLOWAT on TCP socket hoping to receive
one [E]POLLIN event only when a given amount of bytes are ready in socket
receive queue.
Problem is that receive autotuning is not aware of this constraint,
meaning sk_rcvbuf might be too small to allow all bytes to be stored.
Add a new (struct proto_ops)->set_rcvlowat method so that a protocol
can override the default setsockopt(SO_RCVLOWAT) behavior.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unnecessary check on update_lft variable in
addrconf_prefix_rcv_add_addr routine since it is always set to 0.
Moreover remove update_lft re-initialization to 0
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and
IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call
for NFPROTO_IPV6 / NF_INET_FORWARD. As a result, these counters get
incremented regardless of whether or not the netfilter hook allows the
packet to continue being processed. This change increments the counters
in ip6_forward_finish() so that it will not happen if the netfilter hook
chooses to terminate the packet, which is similar to how IPv4 works.
Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use valid_name() to make sure user does not provide illegal
device name.
Fixes: ed1efb2aef ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use valid_name() to make sure user does not provide illegal
device name.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Giving an integer to proc_doulongvec_minmax() is dangerous on 64bit arches,
since linker might place next to it a non zero value preventing a change
to ip6frag_low_thresh.
ip6frag_low_thresh is not used anymore in the kernel, but we do not
want to prematuraly break user scripts wanting to change it.
Since specifying a minimal value of 0 for proc_doulongvec_minmax()
is moot, let's remove these zero values in all defrag units.
Fixes: 6e00f7dd5e ("ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 694aba690d ("ipv4: factorize sk_wmem_alloc updates
done by __ip_append_data()") and commit 1f4c6eb240 ("ipv6:
factorize sk_wmem_alloc updates done by __ip6_append_data()"),
when transmitting sub MTU datagram, an addtional, unneeded atomic
operation is performed in ip*_append_data() to update wmem_alloc:
in the above condition the delta is 0.
The above cause small but measurable performance regression in UDP
xmit tput test with packet size below MTU.
This change avoids such overhead updating wmem_alloc only if
wmem_alloc_delta is non zero.
The error path is left intentionally unmodified: it's a slow path
and simplicity is preferred to performances.
Fixes: 694aba690d ("ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()")
Fixes: 1f4c6eb240 ("ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new RTF_CACHE route can be created between ip6_sk_dst_lookup_flow()
and ip6_dst_store() calls in udpv6_sendmsg(), when datagram sending
results to ICMPV6_PKT_TOOBIG error:
udp_v6_send_skb(), for example with vti6 tunnel:
vti6_xmit(), get ICMPV6_PKT_TOOBIG error
skb_dst_update_pmtu(), can create a RTF_CACHE clone
icmpv6_send()
...
udpv6_err()
ip6_sk_update_pmtu()
ip6_update_pmtu(), can create a RTF_CACHE clone
...
ip6_datagram_dst_update()
ip6_dst_store()
And after commit 33c162a980 ("ipv6: datagram: Update dst cache of
a connected datagram sk during pmtu update"), the UDPv6 error handler
can update socket's dst cache, but it can happen before the update in
the end of udpv6_sendmsg(), preventing getting the new dst cache on
the next udpv6_sendmsg() calls.
In order to fix it, save dst in a connected socket only if the current
socket's dst cache is invalid.
The previous patch prepared ip6_sk_dst_lookup_flow() to do that with
the new argument, and this patch enables it in udpv6_sendmsg().
Fixes: 33c162a980 ("ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update")
Fixes: 45e4fd2668 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This should make it consistent with ip6_sk_dst_lookup_flow()
that is accepting the new 'connected' parameter of type bool.
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 'connected' parameter to ip6_sk_dst_lookup_flow() and update
the cache only if ip6_sk_dst_check() returns NULL and a socket
is connected.
The function is used as before, the new behavior for UDP sockets
in udpv6_sendmsg() will be enabled in the next patch.
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move commonly used pattern of ip6_dst_store() usage to a separate
function - ip6_sk_dst_store_flow(), which will check the addresses
for equality using the flow information, before saving them.
There is no functional changes in this patch. In addition, it will
be used in the next patch, in ip6_sk_dst_lookup_flow().
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I forgot to change ip6frag_low_thresh proc_handler
from proc_dointvec_minmax to proc_doulongvec_minmax
Fixes: 3e67f106f6 ("inet: frags: break the 2GB limit for frags storage")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c,
we had some overlapping changes:
1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE -->
MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE
2) In 'net-next' params->log_rq_size is renamed to be
params->log_rq_mtu_frames.
3) In 'net-next' params->hard_mtu is added.
Signed-off-by: David S. Miller <davem@davemloft.net>
While testing my inet defrag changes, I found that the senders
could spend ~20% of cpu cycles in skb_set_owner_w() updating
sk->sk_wmem_alloc for every fragment they cook, competing
with TX completion of prior skbs possibly happening on another cpus.
The solution to this problem is to use alloc_skb() instead
of sock_wmalloc() and manually perform a single sk_wmem_alloc change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'tunnel' was already set at the start of ip6erspan_tap_init().
Fixes: 5a963eb61b ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-03-31
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add raw BPF tracepoint API in order to have a BPF program type that
can access kernel internal arguments of the tracepoints in their
raw form similar to kprobes based BPF programs. This infrastructure
also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which
returns an anon-inode backed fd for the tracepoint object that allows
for automatic detach of the BPF program resp. unregistering of the
tracepoint probe on fd release, from Alexei.
2) Add new BPF cgroup hooks at bind() and connect() entry in order to
allow BPF programs to reject, inspect or modify user space passed
struct sockaddr, and as well a hook at post bind time once the port
has been allocated. They are used in FB's container management engine
for implementing policy, replacing fragile LD_PRELOAD wrapper
intercepting bind() and connect() calls that only works in limited
scenarios like glibc based apps but not for other runtimes in
containerized applications, from Andrey.
3) BPF_F_INGRESS flag support has been added to sockmap programs for
their redirect helper call bringing it in line with cls_bpf based
programs. Support is added for both variants of sockmap programs,
meaning for tx ULP hooks as well as recv skb hooks, from John.
4) Various improvements on BPF side for the nfp driver, besides others
this work adds BPF map update and delete helper call support from
the datapath, JITing of 32 and 64 bit XADD instructions as well as
offload support of bpf_get_prandom_u32() call. Initial implementation
of nfp packet cache has been tackled that optimizes memory access
(see merge commit for further details), from Jakub and Jiong.
5) Removal of struct bpf_verifier_env argument from the print_bpf_insn()
API has been done in order to prepare to use print_bpf_insn() soon
out of perf tool directly. This makes the print_bpf_insn() API more
generic and pushes the env into private data. bpftool is adjusted
as well with the print_bpf_insn() argument removal, from Jiri.
6) Couple of cleanups and prep work for the upcoming BTF (BPF Type
Format). The latter will reuse the current BPF verifier log as
well, thus bpf_verifier_log() is further generalized, from Martin.
7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read
and write support has been added in similar fashion to existing
IPv6 IPV6_TCLASS socket option we already have, from Nikita.
8) Fixes in recent sockmap scatterlist API usage, which did not use
sg_init_table() for initialization thus triggering a BUG_ON() in
scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and
uses a small helper sg_init_marker() to properly handle the affected
cases, from Prashant.
9) Let the BPF core follow IDR code convention and therefore use the
idr_preload() and idr_preload_end() helpers, which would also help
idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory
pressure, from Shaohua.
10) Last but not least, a spelling fix in an error message for the
BPF cookie UID helper under BPF sample code, from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
nf_ct_frag6_queue() uses skb->cb[] to store the fragment offset,
meaning that we could use two cache lines per skb when finding
the insertion point, if for some reason inet6_skb_parm size
is increased in the future.
By using skb->ip_defrag_offset instead of skb->cb[] we pack all the fields
in a single cache line, matching what we did for IPv4.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_frag_queue uses skb->cb[] to store the fragment offset, meaning that
we could use two cache lines per skb when finding the insertion point,
if for some reason inet6_skb_parm size is increased in the future.
By using skb->ip_defrag_offset instead of skb->cb[], we pack all
the fields in a single cache line, matching what we did for IPv4.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make it similar to IPv4 ip_expire(), and release the lock
before calling icmp functions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some users are willing to provision huge amounts of memory to be able
to perform reassembly reasonnably well under pressure.
Current memory tracking is using one atomic_t and integers.
Switch to atomic_long_t so that 64bit arches can use more than 2GB,
without any cost for 32bit arches.
Note that this patch avoids an overflow error, if high_thresh was set
to ~2GB, since this test in inet_frag_alloc() was never true :
if (... || frag_mem_limit(nf) > nf->high_thresh)
Tested:
$ echo 16000000000 >/proc/sys/net/ipv4/ipfrag_high_thresh
<frag DDOS>
$ grep FRAG /proc/net/sockstat
FRAG: inuse 14705885 memory 16000002880
$ nstat -n ; sleep 1 ; nstat | grep Reas
IpReasmReqds 3317150 0.0
IpReasmFails 3317112 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is obsolete, after rhashtable addition to inet defrag.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
