Commit Graph

1092 Commits

Author SHA1 Message Date
Stephen Rothwell
ee7a76da1e [POWERPC] Size swapper_pg_dir correctly
David Gibson pointed out that swapper_pg_dir actually need to be
PGD_TABLE_SIZE bytes long not PAGE_SIZE.  This actually saves 64k in
the bss for a kernel ppc64_defconfig built with CONFIG_PPC_64K_PAGES.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Stephen Rothwell
7b2c3c5b1d [POWERPC] Fix section mismatch in PCI code
Create a helper function (alloc_maybe_bootmem) that is marked __init_refok
to limit the chances of mistakenly referring to other __init routines.

WARNING: vmlinux.o(.text+0x2a9c4): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.update_dn_pci_info' and '.pci_dn_reconfig_notifier')
WARNING: vmlinux.o(.text+0x36430): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.mpic_msi_init_allocator' and '.find_ht_magic_addr')
WARNING: vmlinux.o(.text+0x5e804): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')
WARNING: vmlinux.o(.text+0x5e8e8): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')
WARNING: vmlinux.o(.text+0x5e968): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Domen Puncer
ee983079ce [POWERPC] MPC5200 low power mode
Low-power mode implementation for Lite5200b.
Some I/O registers are also saved here.

A recent U-Boot that supports this (lite5200b_PM_config) is needed.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Michael Ellerman
7af1443a9d [POWERPC] spufs: Handle errors in SPU coredump code, and support coredump to a pipe
Rework spufs_coredump_extra_notes_write() to check for and return errors.

If we're coredumping to a pipe we can't trust file->f_pos, we need to
maintain the foffset value passed to us. The cleanest way to do this is
to have the low level write routine increment foffset when we've
successfully written.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
e55014923e [POWERPC] spufs: Cleanup ELF coredump extra notes logic
To start with, arch_notes_size() etc. is a little too ambiguous a name for
my liking, so change the function names to be more explicit.

Calling through macros is ugly, especially with hidden parameters, so don't
do that, call the routines directly.

Use ARCH_HAVE_EXTRA_ELF_NOTES as the only flag, and based on it decide
whether we want the extern declarations or the empty versions.

Since we have empty routines, actually use them in the coredump code to
save a few #ifdefs.

We want to change the handling of foffset so that the write routine updates
foffset as it goes, instead of using file->f_pos (so that writing to a pipe
works).  So pass foffset to the write routine, and for now just set it to
file->f_pos at the end of writing.

It should also be possible for the write routine to fail, so change it to
return int and treat a non-zero return as failure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
48cad41f7e [POWERPC] spufs: Combine spufs_coredump_calls with spufs_calls
Because spufs might be built as a module, we can't have other parts of the
kernel calling directly into it, we need stub routines that check first if the
module is loaded.

Currently we have two structures which hold callbacks for these stubs, the
syscalls are in spufs_calls and the coredump calls are in spufs_coredump_calls.
In both cases the logic for registering/unregistering is essentially the same,
so we can simplify things by combining the two.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Jeremy Kerr
4ec3c3d08d [POWERPC] spufs: Remove asmlinkage from spufs_calls
spu_create and spu_run are wrapped by the cell syscall layer, so
we don't need the asmlinkage.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:17 +10:00
Jeremy Kerr
98f06978ff [POWERPC] cell: Unify spufs syscall path
At present, a built-in spufs will not use the spufs_calls callbacks, but
directly call sys_spu_create.  This saves us an indirect branch, but
means we have duplicated functions - one for CONFIG_SPU_FS=y and one for
=m.

This change unifies the spufs syscall path, and provides access to the
spufs_calls structure through a get/put pair.  At present, the only user
of the spufs_calls structure is spu_syscalls.c, but this will facilitate
adding the coredump calls later.

Everyone likes numbers, right?  Here's a before/after comparison with
CONFIG_SPU_FS=y, doing spu_create(); close(); 64k times.

Before:
	[jk@cell ~]$ time ./spu_create
	performing 65536 spu_create calls

	real    0m24.075s
	user    0m0.146s
	sys     0m23.925s

After:
	[jk@cell ~]$ time ./spu_create
	performing 65536 spu_create calls

	real    0m24.777s
	user    0m0.141s
	sys     0m24.631s

So, we're adding around 11us per syscall, at the benefit of having
only one syscall path.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:16 +10:00
Adrian Bunk
e6b6e3ffb9 [POWERPC] Remove APUS support from arch/ppc
Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-17 15:15:04 +10:00
Timur Tabi
82925e76db [POWERPC] 86xx: Fix definition of global-utilites structure
The current definition of struct ccsr_guts in immap_86xx.h was for 85xx.
This patch fixes that and replaces the vague integer types with sized types
of the correct endianness.  The unused struct ccsr_pci is also deleted.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:54:00 -05:00
Timur Tabi
dc967d7f5e [POWERPC] add clrsetbits macros
This patch adds the clrsetbits_xxx() macros, which are used to set and clear
multiple bits in a single read-modify-write operation.  Specify the bits to
clear in the 'clear' parameter and the bits to set in the 'set' parameter.
These macros can also be used to set a multiple-bit bit pattern using a mask,
by specifying the mask in the 'clear' parameter and the new bit pattern in the
'set' parameter.  There are big-endian and little-endian versions for 8, 16,
32, and 64 bits.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:56 -05:00
Anton Vorontsov
364f8ffc18 [POWERPC] QE: extern par_io_config_pin and par_io_data_set funcs
This is needed to configure and control QE pario pins from the kernel.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:49 -05:00
Kumar Gala
748a768384 [POWERPC] Fix modpost warnings from head*.S on ppc32
We get warnings like the following from the various ppc32 head*.S files:

WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')

Added a .text.head section simliar to what other architectures do since
modpost already excludes this from its warnings.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:36 -05:00
Kumar Gala
5e14d21e3f [POWERPC] Add cpu feature for SPE handling
Make it so that SPE support can be determined at runtime.  This is similiar
to how we handle AltiVec.  This allows us to have SPE support built in and
work on processors with and without SPE.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:30 -05:00
Geert Uytterhoeven
06462d9263 [POWERPC] PS3: Add new LV1 error codes
Add new error codes that may be returned by the LV1 hypervisor

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:25 +10:00
Olof Johansson
0d72ba930c [POWERPC] Add workaround for MPICs with broken register reads
Some versions of PWRficient 1682M have an interrupt controller in which
the first register in each pair for interrupt sources doesn't always
read with the right polarity/sense values.

To work around this, keep a software copy of the register instead.  Since
it's not modified from the mpic itself, it's a feasible solution.  Still,
keep it under a config option to avoid wasting memory on other platforms.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:25 +10:00
Olof Johansson
a416561bf7 [POWERPC] Move lowlevel runlatch calls under cpu feature control
There's no need to call the runlatch on functions on processors that
don't implement them (CPU_FTR_CTRL).

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:22 +10:00
Olof Johansson
2e1957fd47 [POWERPC] pasemi: Export more SPRs to sysfs when CONFIG_DEBUG_KERNEL=y
Export some of the implementation-specific registers via sysfs.
Useful when debugging, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:21 +10:00
Michael Ellerman
52964f87c6 [POWERPC] Add an optional device_node pointer to the irq_host
The majority of irq_host implementations (3 out of 4) are associated
with a device_node, and need to stash it somewhere. Rather than having
it somewhere different for each host, add an optional device_node pointer
to the irq_host structure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:20 +10:00
Paul Mackerras
b2315372ea Merge branch 'linux-2.6' into for-2.6.24 2007-09-14 01:24:25 +10:00
Masato Noguchi
b7f90a406f [POWERPC] cell/PS3: Fix a bug that causes the PS3 to hang on the SPU Class 0 interrupt.
The Cell BE Architecture spec states that the SPU MFC Class 0 interrupt
is edge-triggered.  The current spu interrupt handler assumes this
behavior and does not clear the interrupt status.

The PS3 hypervisor visualizes all SPU interrupts as level, and on return
from the interrupt handler the hypervisor will deliver a new virtual
interrupt for any unmasked interrupts which for which the status has not
been cleared.  This fix clears the interrupt status in the interrupt
handler.

Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11 04:30:36 +10:00
Paul Mackerras
35438c4327 Merge branch 'linux-2.6' into for-2.6.24 2007-08-28 15:56:11 +10:00
Kumar Gala
33d71d26ba [POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need
To build arch/powerpc without including asm-ppc/ we need these files
in asm-powerpc/

Moved some headers under arch/powerpc/platforms if they were only used by
platform or driver files and fixed up the source file includes to match
the new locations

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:43:29 -05:00
Stephen Rothwell
7180e3e636 [POWERPC] Split out iSeries specific exception macros
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:35 +10:00
Stephen Rothwell
f9ff0f3048 [POWERPC] Move the exception macros into a header file
It makes head_64.S a bit more readable and will allow us to move the
iSeries exceptions elsewhere.

This also removes the last line of the comment:

 * The following macros define the code that appears as
 * the prologue to each of the exception handlers.  They
 * are split into two parts to allow a single kernel binary
 * to be used for pSeries and iSeries.
 * LOL.  One day... - paulus

Anything is possible. :-)

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:35 +10:00
Stephen Rothwell
fc68e8699f [POWERPC] Move iSeries startup code out of head_64.S
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:34 +10:00
Scott Wood
804ace8881 [POWERPC] Use strcasecmp() rather than strncasecmp() when determining device node compatibility
The current code assumes "foo-bar" must always be compatible with a node
compatible with "foo", which breaks device trees where this is not so.

The "case" part is also wrong according to Open Firmware, but it's more
likely to have drivers and/or device trees depending on it, and thus
needs to be handled more carefully.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00
Scott Wood
12cdac34c6 [POWERPC] Add clrbits8 and setbits8
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00
Stephen Rothwell
16a15a30f8 [POWERPC] iSeries: Clean up lparmap mess
We need to have xLparMap in head_64.S so that it is at a fixed address
(because the linker will not resolve (address & 0xffffffff) for us).
But the assembler miscalculates the KERNEL_VSID() expressions.  So put
the confusing expressions into asm-offsets.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:46 +10:00
Josh Boyer
aab69292e4 [POWERPC] 40x decrementer fixes
Allow generic_calibrate_decr to work for 40x platforms.  Given that the hardware
behavior is identical, this also changes the set_dec function to reload the PIT
on 40x to match the behavior 44x currently has.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-08-20 07:29:11 -05:00
Josh Boyer
4d922c8dc3 [POWERPC] 40x MMU
Add MMU definitions for 40x platforms.  Also fixes two warnings in 40x_mmu.c.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:28:48 -05:00
Becky Bruce
86d7a9a9c4 [POWERPC] Fix FSL BookE machine check reporting
Reserved MCSR bits on FSL BookE parts may have spurious values
when mcheck occurs.  Mask these off when printing the MCSR to
avoid confusion.  Also, get rid of the MCSR_GL_CI bit defined
for e500 - this bit doesn't actually have any meaning.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:22:28 -05:00
Stephen Rothwell
e8ff0646e5 [POWERPC] Tidy up CONFIG_PPC_MM_SLICES code
This removes some of the #ifdefs from .c files.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:59 +10:00
Stephen Rothwell
0b8188a44d [POWERPC] Remove get_property and device_is_compatible
They were only needed for backwards compatibility and all in tree uses
have now been changed.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:58 +10:00
Becky Bruce
1ac9f1f71d [POWERPC] Update lmb.h include protection to ASM_POWERPC
This file was protected by _PPC64_LMB_H, which is confusing, as the
32-bit code also uses the lmb these days.  Changed to
_ASM_POWERPC_LMB_H.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:58 +10:00
Segher Boessenkool
9f0cbea0d8 [POWERPC] Implement atomic{, 64}_{read, write}() without volatile
Instead, use asm() like all other atomic operations already do.

Also use inline functions instead of macros; this actually
improves code generation (some code becomes a little smaller,
probably because of improved alias information -- just a few
hundred bytes total on a default kernel build, nothing shocking).

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:58 +10:00
Linas Vepstas
0f2342c85d [POWERPC] pseries: Eliminate global error_log_cnt variable
Eliminate the use of error_log_cnt as a global var shared across
different directories.  Pass it as a parameter instead.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----

Respin of earlier patch, with the CONFIG_PSERIES junk removed from the
header file.

 arch/powerpc/kernel/nvram_64.c         |   10 +++++-----
 arch/powerpc/platforms/pseries/rtasd.c |    7 ++++---
 include/asm-powerpc/nvram.h            |    6 ++++--
 3 files changed, 13 insertions(+), 10 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:52 +10:00
Segher Boessenkool
f774216d46 [POWERPC] Replace a few #defines with empty inline functions
...so that GCC doesn't complain about unused variables in the
callers of these.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
Benjamin Herrenschmidt
8f2ea1fd3f [POWERPC] Fix initialization and usage of dma_mask
powerpc has a couple of bugs in the usage of dma_masks that tend to
break when drivers explicitly try to set a 32-bit mask for example.

First, the code that generates the pci devices from the OF device-tree
doesn't initialize the mask properly, then our implementation of
set_dma_mask() was trying to validate the -previous- mask value, not the
one passed in as an argument.

This fixes these problems.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:42 +10:00
Andre Detsch
f5996449e3 [POWERPC] cell: Move SPU affinity init to spu_management_of_ops
This patch moves affinity initialization code from spu_base.c to a
new spu_management_of_ops function (init_affinity), which is empty
in the case of PS3. This fixes a linking problem that was happening
when compiling for PS3.
Also, some small code style changes were made.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:21 +10:00
Michael Neuling
67439b76f2 [POWERPC] Fixes for the SLB shadow buffer code
On a machine with hardware 64kB pages and a kernel configured for a
64kB base page size, we need to change the vmalloc segment from 64kB
pages to 4kB pages if some driver creates a non-cacheable mapping in
the vmalloc area.  However, we never updated with SLB shadow buffer.
This fixes it.  Thanks to paulus for finding this.

Also added some write barriers to ensure the shadow buffer contents
are always consistent.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:01 +10:00
Paul Mackerras
c0f7c6cb5d [POWERPC] Expand RPN field to 34 bits when using 64k pages
The real page number field in our PTEs when configured for 64kB pages
is currently 32 bits, which turns out to be not quite enough for the
resources that the eHCA driver wants to map.  This expands the RPN
field to include 2 adjacent, previously-unused bits.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-08-03 14:08:24 +10:00
Linus Torvalds
8d4fbcfbe0 Fix WARN_ON() on bitfield ops
Alexey Dobriyan noticed that the new WARN_ON() semantics that were
introduced by commit 684f978347 (to also
return the value to be warned on) didn't compile when given a bitfield,
because the typeof doesn't work for bitfields.

So instead of the typeof trick, use an "int" variable together with a
"!!(x)" expression, as suggested by Al Viro.

To make matters more interesting, Paul Mackerras points out that that is
sub-optimal on Power, but the old asm-coded comparison seems to be buggy
anyway on 32-bit Power if the conditional was 64-bit, so I think there
are more problems there.

Regardless, the new WARN_ON() semantics may have been a bad idea.  But
this at least avoids the more serious complications.

Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-07-31 21:12:07 -07:00
Stephane Eranian
a583f1b542 remove unused TIF_NOTIFY_RESUME flag
Remove unused TIF_NOTIFY_RESUME flag for all processor architectures.  The
flag was not used excecpt on IA-64 where the patch replaces it with
TIF_PERFMON_WORK.

Signed-off-by: stephane eranian <eranian@hpl.hp.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:38 -07:00
Linus Torvalds
9f5577d815 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (21 commits)
  [POWERPC] spusched: Fix initial timeslice calculation
  [POWERPC] spufs: Fix incorrect initialization of cbe_spu_info.spus
  [POWERPC] Fix Maple platform ISA bus
  [POWERPC] Make pci_iounmap actually unmap things
  [POWERPC] Add function to check if address is an IO port
  [POWERPC] Fix Pegasos keyboard detection
  [POWERPC] iSeries: Fix section mismatch warning in lpevents
  [POWERPC] iSeries: Fix section mismatch warnings
  [POWERPC] iSeries: We need vio_enable_interrupts
  [POWERPC] Fix RTC and device tree on linkstation machines
  [POWERPC] Add of_register_i2c_devices()
  [POWERPC] Fix loop with unsigned long counter variable
  [POWERPC] Fix register labels on show_regs() message for 4xx/Book-E
  [POWERPC] Only allow building of BootX text support on PPC_MULTIPLATFORM
  [POWERPC] Fix the ability to reset on MPC8544 DS and MPC8568 MDS boards
  [POWERPC] Fix mpc7448hpc2 tsi108 device_type bug
  [POWREPC] Fixup a number of modpost warnings on ppc32
  [POWERPC] Fix ethernet PHY support on MPC8544 DS
  [POWERPC] Don't try to allocate resources for a Freescale POWERPC PHB
  Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()"
  ...
2007-07-26 14:00:09 -07:00
Sam Ravnborg
045e72acf1 fix 'dynreloc miscount' link error on Powerpc
Nathan Lynch <ntl@pobox.com> reported:
2.6.23-rc1 breaks the build for 64-bit powerpc for me (using
maple_defconfig):

  LD      vmlinux.o
powerpc64-unknown-linux-gnu-ld: dynreloc miscount for
kernel/built-in.o, section .opd
powerpc64-unknown-linux-gnu-ld: can not edit opd Bad value
make: *** [vmlinux.o] Error 1

However, I see a possibly related binutils patch:
http://article.gmane.org/gmane.comp.gnu.binutils/33650

It was tracked down to be caused by the weak prototype
declaration in mm.h:
__attribute__((weak)) const char *arch_vma_name(struct vm_area_struct *vma);

But there is no need to make the declaration weak - only the definition
needs to be marked weak.  So drop the weak declaration.  And in the process
drop the duplicate definition in page.h for powerpc.

Note: the arch_vma_name fix for x86_64 needs to be applied first to avoid
breaking x86_64

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Nathan Lynch <ntl@pobox.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:18 -07:00
Al Viro
97f1e7f7d2 make powerpc BUG_ON() OK with pointers and bitwise
Since powerpc insists on printing the _value_ of condition
and on casting it to long...  At least let's make it a force-cast.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:57 -07:00
Benjamin Herrenschmidt
6dfbde2091 [POWERPC] Add function to check if address is an IO port
This adds a function that tells you if a given kernel virtual address
is hitting a PCI or ISA IO port permanent mapping or not. This is to
be used in the next patch to fix iomap APIs to properly unmap things.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:17:47 +10:00
Stephen Rothwell
c40b91b59d [POWERPC] iSeries: Fix section mismatch warnings
WARNING: vmlinux.o(.text+0x8124): Section mismatch: reference to .init.text:.iSeries_early_setup (between '.__start_initialization_iSeries' and '.__mmu_off')
WARNING: vmlinux.o(.text+0x8128): Section mismatch: reference to .init.text:.early_setup (between '.__start_initialization_iSeries' and '.__mmu_off')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:12:17 +10:00
Stephen Rothwell
56a4c6e31a [POWERPC] iSeries: We need vio_enable_interrupts
Commit 3d0e91f7ac introduced a requirement
for vio_enable_interrupts which iSeires has never needed.  So create a
dummy one.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:12:17 +10:00