IB_MULTICAST_LID_BASE is defined as follows:
#define IB_MULTICAST_LID_BASE cpu_to_be16(0xC000)
Hence use be16_to_cpu() to convert it to CPU endianness. Compile-tested
only.
Fixes: af808ece5c ("IB/SA: Check dlid before SA agent queries for ClassPortInfo")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Improve uverbs_cleanup_ucontext algorithm to work properly when the
topology graph of the objects cannot be determined at compile time. This
is the case with objects created via the devx interface in mlx5.
Typically uverbs objects must be created in a strict topologically sorted
order, so that LIFO ordering will generally cause them to be freed
properly. There are only a few cases (eg memory windows) where objects can
point to things out of the strict LIFO order.
Instead of using an explicit ordering scheme where the HW destroy is not
allowed to fail, go over the list multiple times and allow the destroy
function to fail. If progress halts then a final, desperate, cleanup is
done before leaking the memory. This indicates a driver bug.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since there are adapters that have four ports, increase the size of
the srpt_device.port[] array. This patch avoids that the following
warning is hit with quad port Chelsio adapters:
WARN_ON(sdev->device->phys_port_cnt > ARRAY_SIZE(sdev->port));
Reported-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We need to set can_queue earlier than when enabling the scsi host.
in a blk-mq enabled environment, the tagset allocation is taken
from can_queue which cannot be modified later. Also, pass an updated
.can_queue to iscsi_session_setup to have enough iscsi tasks allocated
in the session kfifo.
Reported-by: Karandeep Chahal <karandeepchahal@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Do not call sk_dst_set() on every packet transfer because
that calls sk_tx_queue_clear(), which clears the tx queue.
A QP must stay on the same tx queue to maintain packet order.
Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This lock used to be protecting a call to dst_get_neighbour_noref,
however the below commit changed it to dst_neigh_lookup which no longer
requires rcu.
Access to nud_state, neigh_event_send or rdma_copy_addr does not require
RCU, so delete the lock.
Fixes: 02b619555a ("infiniband: Convert dst_fetch_ha() over to dst_neigh_lookup().")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The failure in releasing one UAR doesn't mean that we can't continue to
release rest of system pages, so don't return too early.
As part of cleanup, there is no need to print warning if
mlx5_cmd_free_uar() fails because such warning will be printed as part of
mlx5_cmd_exec().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function is not in use - delete it.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
port_num is untrusted data from the user, so it should be checked after
calling fill_sgid_attr, which validates it.
Fixes: 8d9ec9addd ("IB/core: Add a sgid_attr pointer to struct rdma_ah_attr")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any error status returned by FW will trigger a print similar to the
following error message in the dmesg.
[ 55.884355] mlx5_core 0000:00:04.0: mlx5_cmd_check:712:(pid 555):
ALLOC_UAR(0x802) op_mod(0x0) failed, status limits exceeded(0x8),
syndrome (0x0)
Those prints are extremely valuable to diagnose issues with running system
and it is important to keep them. However, not-so-careful user can trigger
endless number of such prints by depleting HW resources and will spam
dmesg.
Rate limiting of such messages solves this issue.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since slave GID's do not exist in the core gid table we can no longer use
the core code to help do this without creating inconsistencies. Directly
create the AH using mlx4 internal APIs.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
kern_spec->reserved is checked prior to calling
kern_spec_to_ib_spec_filter() which makes this second check redundant.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
dma_map_sg_attrs() returns 0 on error and can't return a negative number
(ensured by BUG_ON), so don't check.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Number of specs is provided by user and in valid case can be equal to zero.
Such argument causes to call to kcalloc() with zero-length request and in
return the ZERO_SIZE_PTR is assigned. This pointer is different from NULL
and makes various if (..) checks to success.
Fixes: b6ba4a9aa5 ("IB/uverbs: Add support for flow counters")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following the removal of ib_create_flow(), adjust the code to get rid of
ib_destroy_flow() too.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are no kernel users of this interface so lets drop it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the accepted series "Refactor ib_uverbs_write path", we presented the
roadmap to get rid of uverbs_cmd_mask and uverbs_ex_cmd_mask fields in
favor of simple check of function pointer. So let's put NULL check of
create_flow function callback despite the fact that uverbs_ex_cmd_mask
still exists.
Link: https://www.spinics.net/lists/linux-rdma/msg60753.html
Suggested-by: Michael J Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reflect the acquisition of SanDisk by Western Digital in my e-mail
address. Remove the reference to David Dillow's git tree since SRP patches
are queued by Doug and Jason. Remove the reference to the OpenFabrics
website since the srp_daemon source code has been moved from that website
into the rdma-core project. Add an entry for the SRP target driver.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: David Dillow <dillow@google.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
usnic has a modified version of the core codes' ib_umem_get() and
related, and the copy misses many of the bug fixes done over the years:
Commit bc3e53f682 ("mm: distinguish between mlocked and pinned pages")
Commit 87773dd56d ("IB: ib_umem_release() should decrement mm->pinned_vm
from ib_umem_get")
Commit 8494057ab5 ("IB/uverbs: Prevent integer overflow in ib_umem_get
address arithmetic")
Commit 8abaae62f3 ("IB/core: disallow registering 0-sized memory region")
Commit 66578b0b2f ("IB/core: don't disallow registering region starting
at 0x0")
Commit 53376fedb9 ("RDMA/core: not to set page dirty bit if it's already
set.")
Commit 8e907ed488 ("IB/umem: Use the correct mm during ib_umem_release")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch follows the logic from ib_core but considers the internal
device state upon executing the involved commands.
Specifically, Upon internal error state modify QP to an error state can
be assumed to be success as each in-progress WR going to be flushed in
error in any case as expected by that modify command.
In addition,
As the drain should never fail the driver makes sure that post_send/recv
will succeed even if the device is already in an internal error state.
As such once the driver will supply the simulated/SW CQEs the CQE for
the drain WR will be handled as well.
In case of an internal error state the CQE for the drain WR may be
completed as part of the main task that handled the error state or by
the task that issued the drain WR.
As the above depends on scheduling the code takes the relevant locks
and actions to make sure that the completion handler for that WR will
always be called after that the post_send/recv were issued but not in
parallel to the other task that handles the error flow.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch follows the logic from ib_core but considers the internal
device state upon executing the involved commands.
Specifically,
Upon internal error state modify QP to an error state can be assumed to
be success as each in-progress WR going to be flushed in error in any
case as expected by that modify command.
In addition,
As the drain should never fail the driver makes sure that post_send/recv
will succeed even if the device is already in an internal error state.
As such once the driver will supply the simulated/SW CQEs the CQE for
the drain WR will be handled as well.
In case of an internal error state the CQE for the drain WR may be
completed as part of the main task that handled the error state or by
the task that issued the drain WR.
As the above depends on scheduling the code takes the relevant locks and
actions to make sure that the completion handler for that WR will always
be called after that the post_send/recv were issued but not in parallel
to the other task that handles the error flow.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that all users have been converted to use the version of these APIs
that returns a gid_attr pointer we can delete the old entry points.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Prior patches now ensure that the AV has a sgid_attr, if one would have
been required. Instead of querying for one, take it directly from the AH.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
While processing a path record entry in CM messages the associated GID
attribute is now also supplied.
Currently for RoCE a netdevice's net namespace pointer and ifindex are
stored in path record entry. Both of these fields of the netdev can change
anytime while processing CM messages. Additionally storing net namespace
without holding reference will lead to use-after-free crash. Therefore it
is removed. Netdevice information for RoCE is instead provided via
referenced gid attribute in ib_cm requests.
Such a design leads to a situation where the kernel can crash when the net
pointer becomes invalid. However today it is always initialized to
init_net, which cannot become invalid. In order to support processing
packets in any arbitrary namespace of the received packet, it is necessary
to avoid such conditions.
This patch removes the dependency on the net pointer and ifindex; instead
it will rely on SGID attribute which contains a pointer to netdev.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Make the sgid_attr available along with path information to the event
consumer, this allows the consumer to keep using the same GID table entry
as the event is related to.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Hold reference to the the sgid_attr which is used in a cm_id until the
cm_id is destroyed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Use the sgid and other information from the path record to figure out the
sgid_attrs.
Store the selected table entry in the sgid_attr for everything else to
use.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This is really just a CM support function, normally a multicast address
does not have a specific SGID - but the RDMA CM usage model does restrict
things to the netdevice the CM id is bound to, at least for roce case.
Store the selected table entry in the sgid_attr for everything else to
use.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The work completion is inspected to determine what dgid table entry was
used to receieve the packet, produces a sgid_attr that matches and sticks
it in the ah_attr.
All callers of this function are now required to release the ah_attr on
success.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The INTx IRQ support does not work for all HF1 IRQ handlers
(specifically the receive data IRQs).
Remove all supporting code for the INTx IRQ.
If the requested MSIx vector request is unsuccessful, do not allow the
driver to continue.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Many fields in ctxtdata are incorrectly sized and the organization of the
fields within the structure is a jumble.
Fix by:
- Correcting oversize fields.
- Putting fields common to all contexts at the top with hot fields
at the top.
- Moving PSM fields to the bottom of the structure.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the sizeable cache of the chip sizing CSRs and replace with CSR
reads as needed.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fields in this structure are sized excessively based on hardware
limitations and input values.
Fix by reducing fields as appropriate and repositioning to close holes in
the structure.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It is only ever written.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The usage of this ctxt data field is not hot path and the value can be
computed on demand to cut down the ctxtdata bloat.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If we already hold the table->lock when doing the kref_put it means we are
in a context where it is safe to do the deletion synchronously, with no
need for the work queue.
This helps to eliminate issues when GID change is requested as part of MAC
address change or bonding event change where expectation is to replace the
GID almost immediately.
Fixes: b150c3862d ("IB/core: Introduce GID entry reference counts")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When sending multicast leave request, consider the net ns in which this
cm_id is created.
Code was duplicated in cma_leave_mc_groups() and rdma_leave_multicast(),
which is now done using a helper function cma_leave_roce_mc_group().
Fixes: bee3c3c918 ("IB/cma: Join and leave multicast groups with IGMP")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In this context the uobject is not allowed to be NULL, so type is the same
as uobject->type, and at least for IDR, id is the same as uobject->id.
FD objects should never handle the FD number outside the uAPI boundary
code.
Suggested-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For dependencies, branch based on 'mellanox/mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
Pull RoCE ICRC counters from Leon Romanovsky:
====================
This series exposes RoCE ICRC counter through existing RDMA hw_counters
sysfs interface.
The first patch has all HW definitions in mlx5_ifc.h file and second patch
is the actual counter implementation.
====================
* branch 'icrc-counter':
IB/mlx5: Support RoCE ICRC encapsulated error counter
net/mlx5: Add RoCE RX ICRC encapsulated counter
This patch adds support to query the counter that counts the
RoCE packets with corrupted ICRC (Invariant Cyclic Redundancy Code).
This counter will be under
/sys/class/infiniband/<mlx5-dev>/ports/<port>/hw_counters/
rx_icrc_encapsulated - The number of RoCE packets with ICRC
error.
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add capability bit in PCAM register and RoCE ICRC error counter
to PPCNT register.
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Put all relevant checks for transport domain in the
mlx5_ib_alloc/dealloc_transport_domain functions.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move some s_flags defines out of rdmavt and into hfi1 because they are
hfi1 specific and therefore should remain in the driver instead of
bubbling up to rdmavt.
Document device specific ranges in rdmavt and remap
those in hfi1.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The field is based on a constant that can never change.
Use the define to assign the register instead.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This field should be in ctxtdata to allow for better locality of access by
eliminating a dd dereference.
The new field is now side-by-side with rcvhdrqentsize since the rhf_offset
is a function of the rcvhdrqentsize.
Both fields are now correctly sized as u8.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current implementation precludes having receive context specific
packet type receive handlers.
Fix this by adding adding c99 const array for the existing handlers and
remove the current 72 bytes of pointers from devdata.
A new pointer in hfi1_ctxtdata will point to the const array.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose DEVX tree to be used by upper layers.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Return the matching device EQN for a given user vector number via the
DEVX interface.
Note:
EQs are owned by the kernel and shared by all user processes.
Basically, a user CQ can point to any EQ.
The kernel doesn't enforce any such limitation today either.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to register a memory with the firmware via the DEVX
interface.
The driver translates a given user address to ib_umem then it will
register the physical addresses with the firmware and get a unique id
for this registration to be used for this virtual address.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
