No one should directly access the driver_data field, so remove the field
and make it private. We dynamically create the private field now if it
is needed, to handle drivers that call get/set before they are
registered with the driver core.
Also update the copyright notices on these files while we are there.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Introduce a core framework for run-time power management of I/O
devices. Add device run-time PM fields to 'struct dev_pm_info'
and device run-time PM callbacks to 'struct dev_pm_ops'. Introduce
a run-time PM workqueue and define some device run-time PM helper
functions at the core level. Document all these things.
Special thanks to Alan Stern for his help with the design and
multiple detailed reviews of the pereceding versions of this patch
and to Magnus Damm for testing feedback.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@igel.co.jp>
This patch adds a new bus notifier event which is emitted _after_ a
device is removed from its driver. This event will be used by the
dma-api debug code to check if a driver has released all dma allocations
for that device.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is currently only one way for userspace to say "wait for my storage
device to get ready for the modules I just loaded": to load the
scsi_wait_scan module. Expectations of userspace are that once this
module is loaded, all the (storage) devices for which the drivers
were loaded before the module load are present.
Now, there are some issues with the implementation, and the async
stuff got caught in the middle of this: The existing code only
waits for the scsy async probing to finish, but it did not take
into account at all that probing might not have begun yet.
(Russell ran into this problem on his computer and the fix works for him)
This patch fixes this more thoroughly than the previous "fix", which
had some bad side effects (namely, for kernel code that wanted to wait for
the scsi scan it would also do an async sync, which would deadlock if you did
it from async context already.. there's a report about that on lkml):
The patch makes the module first wait for all device driver probes, and then it
will wait for the scsi parallel scan to finish.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nothing outside of the driver core should ever touch knode_driver, so
move it out of the public eye.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes 100ms polling for driver_probe_done in
wait_for_device_probe(), and uses wait_event() instead.
Removing polling in fs initialization may lead to
a faster boot.
This patch also changes the return type of wait_for_device_done()
from int to void.
This patch is against Arjan's patch in linux-next tree.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch moves bus->match out from driver_probe_device and
does not hold device lock to check the match between a device
and a driver.
The idea has been verified by the commit 6cd4958609,
which leads to a faster boot. But the commit 6cd4958609 has
the following drawbacks: 1),only does the quick check in
the path of __driver_attach->driver_probe_device, not in other
paths; 2),for a matched device and driver, check the same match
twice. It is a waste of cpu ,especially for some drivers with long
device id table (eg. usb-storage driver).
This patch adds a helper of driver_match_device to check the match
in all paths, and testes the match only once.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
there's a few places that currently loop over driver_probe_done(), and
I'm about to add another one. This patch abstracts it into a helper
to reduce duplication.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 93e746db18.
Turns out that device_initialize shouldn't fail silently.
This series needs to be reworked in order to get into proper
shape.
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In __device_release_driver(),driver_sysfs_remove() has removed the
driver link under device dir in sysfs, but sysfs_remove_link() is
called again to do such thing. Remove the duplicate call to
sys_remove_link().
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nothing outside of the driver core should ever touch knode_driver, so
move it out of the public eye.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a quick check for the driver<->device match before
taking the locks and doin gthe expensive checks. Taking the lock hurts
in asynchronous boot context where the device lock gets hit; one of the
init functions takes the lock and goes to do an expensive hardware init;
the other init functions walk the same PCI list and get stuck on the
lock as a result.
For the common case, we can know there's no chance whatsoever of a match
if the device isn't in the drivers ID table... so this patch does that
check as a best-effort-avoid-the-lock approach.
Bootcharts for before and after can be seen at
http://www.fenrus.org/before.svghttp://www.fenrus.org/after.svg
Note the long time "agp_ali_init" takes in the first graph; my laptop
doesn't even have an ALI chip in it! (the bootgraphs look a bit
dissimilar, but that's the point, the first one has a bunch of arbitrary
delays in it that cause it to look very different)
This reduces my kernel boot time by about 20%
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix up a number of coding style issues in the drivers/base/ directory
that have annoyed me over the years. checkpatch.pl is now very happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch (as1013) was suggested by David Woodhouse; it fixes a race
in the driver core. If a device is unregistered at the same time as
its driver is unloaded, the driver's code pages may be unmapped while
the remove method is still running. The calls to get_driver() and
put_driver() were intended to prevent this, but they don't work if the
driver's module count has already dropped to 0.
Instead, the patch keeps the device on the driver's list until after
the remove method has returned. This forces the necessary
synchronization to occur.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver core debugging messages are a mess. This provides a unified
message that makes them actually useful.
The format for new kobject debug messages should be:
driver/bus/class: 'OBJECT_NAME': FUNCTION_NAME: message.\n
Note, the class code is not changed in this patch due to pending patches
in my queue that this would conflict with. A later patch will clean
them up.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the kobject, and a few other driver-core-only fields
out of struct driver and into the driver core only. Now drivers can be
safely create on the stack or statically (like they currently are.)
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
struct bus_type is static everywhere in the kernel. This moves the
kobject in the structure out of it, and a bunch of other private only to
the driver core fields are now moved to a private structure. This lets
us dynamically create the backing kobject properly and gives us the
chance to be able to document to users exactly how to use the struct
bus_type as there are no fields they can improperly access.
Thanks to Kay for the build fixes on this patch.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
CC drivers/base/dd.o
drivers/base/dd.c:211: warning: =E2=80=98device_probe_drivers=E2=80=99 defi=
ned but not used
Looks like the following is dead.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the PCI_MULTITHREAD_PROBE option that had already
been marked as broken.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Don't fail bus_attach_device() if the device cannot be bound.
If dev->driver has been specified, reset it to NULL if device_bind_driver()
failed and add the device as an unbound device. As a result,
bus_attach_device() now cannot fail, and we can remove some checking from
device_add().
Also remove an unneeded check in bus_rescan_devices_helper().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make multithreaded probing work per subsystem instead of per driver.
It doesn't make much sense to probe the same device for multiple drivers in
parallel (after all, only one driver can bind to the device). Instead, create
a probing thread for each device that probes the drivers one after another.
Also make the decision to use multi-threaded probe per bus instead of per
device and adapt the pci code.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implement device resource management, in short, devres. A device
driver can allocate arbirary size of devres data which is associated
with a release function. On driver detach, release function is
invoked on the devres data, then, devres data is freed.
devreses are typed by associated release functions. Some devreses are
better represented by single instance of the type while others need
multiple instances sharing the same release function. Both usages are
supported.
devreses can be grouped using devres group such that a device driver
can easily release acquired resources halfway through initialization
or selectively release resources (e.g. resources for port 1 out of 4
ports).
This patch adds devres core including documentation and the following
managed interfaces.
* alloc/free : devm_kzalloc(), devm_kzfree()
* IO region : devm_request_region(), devm_release_region()
* IRQ : devm_request_irq(), devm_free_irq()
* DMA : dmam_alloc_coherent(), dmam_free_coherent(),
dmam_declare_coherent_memory(), dmam_pool_create(),
dmam_pool_destroy()
* PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed()
* iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(),
devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(),
pcim_iomap(), pcim_iounmap()
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Change function call order in device_bind_driver().
If we create symlinks (which might fail) before adding the device to the list
we don't have to clean up afterwards (which we didn't).
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Don't stop on the first ->probe error that is not -ENODEV/-ENXIO.
There might be a driver registered returning an unresonable return code, and
this stops probing completely even though it may make sense to try the next
possible driver. At worst, we may end up with an unbound device.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Create the "driver" link before the child device may be created by
the probing logic. This makes it possible for userspace (udev), to
determine the driver property of the parent device, at the time the
child device is created.
Signed-off-by: Kay Sievers <kay.sievers@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I finally did as you suggested and added the notifier to the struct
bus_type itself. There are still problems to be expected is something
attaches to a bus type where the code can hook in different struct
device sub-classes (which is imho a big bogosity but I won't even try to
argue that case now) but it will solve nicely a number of issues I've
had so far.
That also means that clients interested in registering for such
notifications have to do it before devices are added and after bus types
are registered. Fortunately, most bus types that matter for the various
usage scenarios I have in mind are registerd at postcore_initcall time,
which means I have a really nice spot at arch_initcall time to add my
notifiers.
There are 4 notifications provided. Device being added (before hooked to
the bus) and removed (failure of previous case or after being unhooked
from the bus), along with driver being bound to a device and about to be
unbound.
The usage I have for these are:
- The 2 first ones are used to maintain a struct device_ext that is
hooked to struct device.firmware_data. This structure contains for now a
pointer to the Open Firmware node related to the device (if any), the
NUMA node ID (for quick access to it) and the DMA operations pointers &
iommu table instance for DMA to/from this device. For bus types I own
(like IBM VIO or EBUS), I just maintain that structure directly from the
bus code when creating the devices. But for bus types managed by generic
code like PCI or platform (actually, of_platform which is a variation of
platform linked to Open Firmware device-tree), I need this notifier.
- The other two ones have a completely different usage scenario. I have
cases where multiple devices and their drivers depend on each other. For
example, the IBM EMAC network driver needs to attach to a MAL DMA engine
which is a separate device, and a PHY interface which is also a separate
device. They are all of_platform_device's (well, about to be with my
upcoming patches) but there is no say in what precise order the core
will "probe" them and instanciate the various modules. The solution I
found for that is to have the drivers for emac to use multithread_probe,
and wait for a driver to be bound to the target MAL and PHY control
devices (the device-tree contains reference to the MAL and PHY interface
nodes, which I can then match to of_platform_devices). Right now, I've
been polling, but with that notifier, I can more cleanly wait (with a
timeout of course).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The multithreaded-probing code has a problem: after one initcall level (eg,
core_initcall) has been processed, we will then start processing the next
level (postcore_initcall) while the kernel threads which are handling
core_initcall are still executing. This breaks the guarantees which the
layered initcalls previously gave us.
IOW, we want to be multithreaded _within_ an initcall level, but not between
different levels.
Fix that up by causing the probing code to wait for all outstanding probes at
one level to complete before we start processing the next level.
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make sure data is freed if the kthread fails to start.
Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is a potential deadlock in the driver core. It boils down to
the fact that bus_remove_device() calls klist_remove() instead of
klist_del(), thereby waiting until the reference count of the
klist_node in the bus's klist of devices drops to 0. The refcount
can't reach 0 so long as a modprobe process is trying to bind a new
driver to the device being removed, by calling __driver_attach(). The
problem is that __driver_attach() tries to acquire the device's
parent's semaphore, but the caller of bus_remove_device() is quite
likely to own that semaphore already.
It isn't sufficient just to replace klist_remove() with klist_del().
Doing so runs the risk that the device would remain on the bus's klist
of devices for some time, and so could be bound to another driver even
after it was unregistered. What's needed is a new way to distinguish
whether or not a device is registered, based on a criterion other than
whether its klist_node is linked into the bus's klist of devices. That
way driver binding can fail when the device is unregistered, even if
it is still linked into the klist.
This patch (as782) implements the solution, by adding a new bitflag to
indiate when a struct device is registered, by testing the flag before
allowing a driver to bind a device, and by changing the definition of
the device_is_registered() inline.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the infrastructure for drivers to do a threaded probe, and
waits at init time for all currently outstanding probes to complete.
A new kernel thread will be created when the probe() function for the
driver is called, if the multithread_probe bit is set in the driver
saying it can support this kind of operation.
I have tested this with USB and PCI, and it works, and shaves off a lot
of time in the boot process, but there are issues with finding root boot
disks, and some USB drivers assume that this can never happen, so it is
currently not enabled for any bus type. Individual drivers can enable
this right now if they wish, and bus authors can selectivly turn it on
as well, once they determine that their subsystem will work properly
with it.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch (as667) changes the __device_release_driver() routine to
prevent it from crashing when it runs across a device not on any bus.
This seems logical, inasmuch as the corresponding bus_add_device()
routine has an explicit check allowing it to accept such devices.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add bus_type probe, remove and shutdown methods to replace the
corresponding methods in struct device_driver. This matches
the way we handle the suspend/resume methods.
Since the bus methods override the device_driver methods, warn
if a device driver is registered whose methods will not be
called.
The long-term idea is to remove the device_driver methods entirely.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch (as604) makes the driver core hold a device's parent's lock
as well as the device's lock during calls to the probe and remove
methods in a driver. This facility is needed by USB device drivers,
owing to the peculiar way USB devices work:
A device provides multiple interfaces, and drivers are bound
to interfaces rather than to devices;
Nevertheless a reset, reset-configuration, suspend, or resume
affects the entire device and requires the caller to hold the
lock for the device, not just a lock for one of the interfaces.
Since a USB driver's probe method is always called with the interface
lock held, the locking order rules (always lock parent before child)
prevent these methods from acquiring the device lock. The solution
provided here is to call all probe and remove methods, for all devices
(not just USB), with the parent lock already acquired.
Although currently only the USB subsystem requires these changes, people
have mentioned in prior discussion that the overhead of acquiring an
extra semaphore in all the prove/remove sequences is not overly large.
Up to now, the USB core has been using its own set of private
semaphores. A followup patch will remove them, relying entirely on the
device semaphores provided by the driver core.
The code paths affected by this patch are:
device_add and device_del: The USB core already holds the parent
lock, so no actual change is needed.
driver_register and driver_unregister: The driver core will now
lock both the parent and the device before probing or removing.
driver_bind and driver_unbind (in sysfs): These routines will
now lock both the parent and the device before binding or
unbinding.
bus_rescan_devices: The helper routine will lock the parent
before probing a device.
I have not tested this patch for conflicts with other subsystems. As
far as I can see, the only possibility of conflict would lie in the
bus_rescan_devices pathway, and it seems pretty remote. Nevertheless,
it would be good for this to get a lot of testing in -mm.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch (as603) makes a few small fixes to the driver core:
Change spin_lock_irq for a klist lock to spin_lock;
Fix reference count leaks;
Minor spelling and formatting changes.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
bus_rescan_devices_helper() does not hold the dev->sem when it checks for
!dev->driver(). device_attach() holds the sem, but calls again
device_bind_driver() even when dev->driver is set.
What happens is that a first device_attach() call (module insertion time)
is on the way binding the device to a driver. Another thread calls
bus_rescan_devices(). Now when bus_rescan_devices_helper() checks for
dev->driver it is still NULL 'cos the the prior device_attach() is not yet
finished. But as soon as the first one releases the dev->sem the second
device_attach() tries to rebind the already bound device again.
device_bind_driver() does this blindly which leads to a corrupt
driver->klist_devices list (the device links itself, the head points to the
device). Later a call to device_release_driver() sets dev->driver to NULL
and breaks the link it has to itself on knode_driver. Rmmoding the driver
later calls driver_detach() which leads to an endless loop 'cos the list
head in klist_devices still points to the device. And since dev->driver is
NULL it's stuck with the same device forever. Boom. And rmmod hangs.
Very easy to reproduce with new-style pcmcia and a 16bit card. Just loop
modprobe <pcmcia-modules> ;cardctl eject; rmmod <card driver, pcmcia
modules>.
Easiest fix is to check if the device is already bound to a driver in
device_bind_driver(). This avoids the double binding.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
at the moment, the list_head semantics are
list_add(node, head)
whereas current klist semantics are
klist_add(head, node)
This is bound to cause confusion, and since klist is the newcomer, it
should follow the list_head semantics.
I also added missing include guards to klist.h
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds a single file, "bind", to the sysfs directory of every driver
registered with the driver core. To bind a device to a driver, write
the bus id of the device you wish to bind to that specific driver to the
"bind" file (remember to not add a trailing \n). If that bus id matches
a device on that bus, and it does not currently have a driver bound to
it, the probe sequence will be initiated with that driver and device.
Note, this requires that the driver itself be willing and able to accept
that device (usually through a device id type table). This patch does
not make it possible to override the driver's id table.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The error handling in bus_add_device() and device_attach() is simply
non-existing. This patch propagates any error from device_attach to
the upper layers to allow for a proper recovery.
From: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch is intended for your "driver" tree. It fixes several subtle
races in driver_detach() and device_release_driver() in the driver-model
core.
The major change is to use klist_remove() rather than klist_del() when
taking a device off its driver's list. There's no other way to guarantee
that the list pointers will be updated before some other driver binds to
the device. For this to work driver_detach() can't use a klist iterator,
so the loop over the devices must be written out in full. In addition the
patch protects against the possibility that, when a driver and a device
are unregistered at the same time, one may be unloaded from memory before
the other is finished using it.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There's no check to see if the device is already bound to a driver, which
could do bad things. The first thing to go wrong is that it will try to match
a driver with a device already bound to one. In some cases (it appears with
USB with drivers/usb/core/usb.c::usb_match_id()), some drivers will match a
device based on the class type, so it would be common (especially for HID
devices) to match a device that is already bound.
The fun comes when ->probe() is called, it fails, then
driver_probe_device() does this:
dev->driver = NULL;
Later on, that pointer could be be dereferenced without checking and cause
hell to break loose.
This problem could be nasty. It's very hardware dependent, since some
devices could have a different set of matching qualifiers than others.
Now, I don't quite see exactly where/how you were getting that crash.
You're dereferencing bad memory, but I'm not sure which pointer was bad
and where it came from, but it could have come from a couple of different
places.
The patch below will hopefully fix it all up for you. It's against
2.6.12-rc2-mm1, and does the following:
- Move logic to driver_probe_device() and comments uncommon returns:
1 - If device is bound
0 - If device not bound, and no error
error - If there was an error.
- Move locking to caller of that function, since we want to lock a
device for the entire time we're trying to bind it to a driver (to
prevent against a driver being loaded at the same time).
- Update __device_attach() and __driver_attach() to do that locking.
- Check if device is already bound in __driver_attach()
- Update the converse device_release_driver() so it locks the device
around all of the operations.
- Mark driver_probe_device() as static and remove export. It's an
internal function, it should stay that way, and there are no other
callers. If there is ever a need to export it, we can audit it as
necessary.
Signed-off-by: Andrew Morton <akpm@osdl.org>
- Can't wait on removing the current item in the list (the positive refcount *because*
we are using it causes it to deadlock).
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
