This option appends current timestamp to the output file name.
For example:
# perf record -a --timestamp-filename
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Dump perf.data.2015122622265847 ]
[ perf record: Captured and wrote 0.742 MB perf.data.<timestamp> (90 samples) ]
# ls
perf.data.201512262226584
The timestamp will be useful for identifying each perf.data after the
'perf record' support for generating multiple output files gets
introduced.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460535673-159866-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
auxtrace_snapshot_enable has only two states (0/1). Turns it into a
triple states enum so SIGUSR2 handler can safely do other works without
triggering auxtrace snapshot.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460535673-159866-4-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead receive a callchain_param pointer to configure callchain
aspects, not doing so if NULL is passed.
This will allow fine grained control over which evsels in an evlist
gets callchains enabled.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2mupip6khc92mh5x4nw9to82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows cloning bpf-output event configuration among multiple
bpf scripts. If there exist a map named '__bpf_output__' and not
configured using 'map:__bpf_output__.event=', this patch clones the
configuration of another '__bpf_stdout__' map. For example, following
command:
# perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:__bpf_stdout__.event=evt/ \
--ev ./test_bpf_trace2.c usleep 100000
equals to:
# perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:__bpf_stdout__.event=evt/ \
--ev ./test_bpf_trace2.c/map:__bpf_stdout__.event=evt/ \
usleep 100000
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460128045-97310-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT uses the time members from the perf_event_mmap_page to convert
between TSC and perf time.
Due to a lack of foresight when Intel PT was implemented, those time
members were recorded in the (implementation dependent) AUXTRACE_INFO
event, the structure of which is generally inaccessible outside of the
Intel PT decoder. However now the conversion between TSC and perf time
is needed when processing a jitdump file when Intel PT has been used for
tracing.
So add a user event to record the time members. 'perf record' will
synthesize the event if the information is available. And session
processing will put a copy of the event on the session so that tools
like 'perf inject' can easily access it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1457426324-30158-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__mmap_ex() can fail without setting errno (for example, fail
in condition checking. In this case all syscall is success).
If this happen, record__open() incorrectly returns 0. Force setting rc
is a quick way to avoid this problem, or we have to follow all possible
code path in perf_evlist__mmap_ex() to make sure there's at least one
system call before returning an error.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-30-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move code for finalizing 'perf.data' to record__finish_output(). It will
be used by following commits to split output to multiple files.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-23-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create record__synthesize(). It can be used to create tracking events
for each perf.data after perf supporting splitting into multiple
outputs.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-20-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commits in a BPF patchkit will extract kernel and module synthesizing
code into a separated function and call it multiple times. This patch
replace 'if (err < 0)' using WARN_ONCE, makes sure the error message
show one time.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-19-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf__apply_obj_config() is introduced as the core API to apply object
config options to all BPF objects. This patch also does the real work
for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value
stored in map's private field into the BPF map.
This patch is required because we are not always able to set all BPF
config during parsing. Further patch will set events created by perf to
BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until
perf_evsel__open().
bpf_map_foreach_key() is introduced to iterate over each key needs to be
configured. This function would be extended to support more map types
and different key settings.
In perf record, before start recording, call bpf__apply_config() to turn
on all BPF config options.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
# echo "" > /sys/kernel/debug/tracing/trace
# ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
# ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
usleep-19000 [006] d... 2394831.057840: : 101
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to easily switch all events to user or kernel space with simple
--all-user or --all-kernel options.
This will be handy within perf mem/c2c wrappers to switch easily monitoring
modes.
Committer note:
Testing it:
# perf record --all-kernel --all-user -a sleep 2
Error: option `all-user' cannot be used with all-kernel
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-user Configure all used events to run in user space.
--all-kernel Configure all used events to run in kernel space.
# perf record --all-user --all-kernel -a sleep 2
Error: option `all-kernel' cannot be used with all-user
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-kernel Configure all used events to run in kernel space.
--all-user Configure all used events to run in user space.
# perf record --all-user -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.416 MB perf.data (162 samples) ]
# perf report | grep '\[k\]'
# perf record --all-kernel -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.423 MB perf.data (296 samples) ]
# perf report | grep '\[\.\]'
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-2-git-send-email-jolsa@kernel.org
[ Made those options to be mutually exclusive ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' knows whether buildid cache is enabled (via
--no-no-buildid-cache) deliberately. Buildid cache can be turned off in
some situations.
Output switching support needs this feature to turn off buildid cache
by default.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-33-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --buildid-all option is to record build-id of all DSOs in the file.
It might be very costly to postprocess samples to find which DSO hits.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1452519429-31779-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we don't synthesize data mmap by default. It depends on -d
option, that enables data address sampling.
But we've seen cases (softice) where DWARF unwinder went through non
executable mmaps, which we need to lookup in MAP__VARIABLE tree.
Making data mmaps to be synthesized for dwarf unwind as well.
Reported-by: Noel Grandin <noelgrandin@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160107133022.GA32115@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing the 'stat' feature to mark a perf.data as created by the
'perf stat record' command. It contains no data.
It's needed so that the report tools (report/script) can differentiate
sampling data from counting data, because they need to be treated in a
different way.
In the future it might be used to store the version of the stat storage
system used.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-28-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the subcommand-related files from perf to a new library named
libsubcmd.a.
Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Post processing at 'perf record' takes a long time on big machines.
What it does is to find the build-id of binaries found in the event
stream, so that it can make sure, at 'report' time, that the symtabs (be
it ELF, kallsyms, etc) being used to resolve symbols are the ones
matching the binaries found at 'record' time.
Sometimes we just want to skip this processing of events at the end of
the session to get quicker results, making sure the binaries haven't
changed from 'record' to 'report' time.
Add a new config option to control this behavior.
The record.build-id config variable can have one of the following
values:
- cache: post-process data and save/update the binaries into the
build-id cache (in ~/.debug). This is the default.
- no-cache: post-process the data but not update the build-id cache.
Same effect as using the -N option.
- skip: skip post-processing and do not update the cache.
Same effect as using the -B option.
Reported-and-Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1450144196-22957-1-git-send-email-namhyung@kernel.org
[ Added some more text to the documentation ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make perf-record command support --vmlinux option if BPF_PROLOGUE is on.
'perf record' needs vmlinux as the source of DWARF info to generate
prologue for BPF programs, so path of vmlinux should be specified.
Short name 'k' has been taken by 'clockid'. This patch skips the short
option name and uses '--vmlinux' for vmlinux path.
Documentation is also updated.
Test result:
In a production (or broken) environment:
(by:
# rm -rf ~/.debug/
# mv /lib/modules/`uname -r`/build/vmlinux /tmp/
)
# ./perf record -e ./test_bpf_base.c ls
Failed to find the path for kernel: No such file or directory
event syntax error: './test_bpf_base.c'
\___ You need to check probing points in BPF file
...
# ./perf record --vmlinux /tmp/vmlinux -e ./test_bpf_base.c ls
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
Help messages when build with NO_LIBBPF:
# ./perf record -h
--transaction sample transaction flags (special events only)
--vmlinux <file> vmlinux pathname
(not built-in because NO_LIBBPF=1)
# ./perf record --vmlinux /tmp/vmlinux ls /
Warning: option `vmlinux' is being ignored because NO_LIBBPF=1
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (11 samples) ]
Help messages when build with NO_DWARF:
# ./perf record -h
--transaction sample transaction flags (special events only)
--vmlinux <file> vmlinux pathname
(not built-in because NO_DWARF=1)
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1450089563-122430-15-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch keeps options of perf builtins same in all conditions. If
one option is disabled because of compiling options, users should be
notified.
Masami suggested another implementation in [1] that, by adding a
OPTION_NEXT_DEPENDS option before those options in the 'struct option'
array, options parser knows an option is disabled. However, in some
cases this array is reordered (options__order()). In addition, in
parse-option.c that array is const, so we can't simply merge
information in decorator option into the affacted option.
This patch chooses a simpler implementation that, introducing a
set_option_nobuild() function and two option parsing flags. Builtins
with such options should call set_option_nobuild() before option
parsing. The complexity of this patch is because we want some of options
can be skipped safely. In this case their arguments should also be
consumed.
Options in 'perf record' and 'perf probe' are fixed in this patch.
[1] http://lkml.kernel.org/g/50399556C9727B4D88A595C8584AAB3752627CD4@GSjpTKYDCembx32.service.hitachi.net
Test result:
Normal case:
# ./perf probe --vmlinux /tmp/vmlinux sys_write
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
Build with NO_DWARF=1:
# ./perf probe -L sys_write
Error: switch `L' is not available because NO_DWARF=1
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
or: perf probe [<options>] --del '[GROUP:]EVENT' ...
or: perf probe --list [GROUP:]EVENT ...
or: perf probe [<options>] --funcs
-L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]>
Show source code lines.
(not built-in because NO_DWARF=1)
# ./perf probe -k /tmp/vmlinux sys_write
Warning: switch `k' is being ignored because NO_DWARF=1
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
# ./perf probe --vmlinux /tmp/vmlinux sys_write
Warning: option `vmlinux' is being ignored because NO_DWARF=1
Added new event:
[SNIP]
# ./perf probe -l
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
...
-k, --vmlinux <file> vmlinux pathname
(not built-in because NO_DWARF=1)
-L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]>
Show source code lines.
(not built-in because NO_DWARF=1)
...
-V, --vars <FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT>
Show accessible variables on PROBEDEF
(not built-in because NO_DWARF=1)
--externs Show external variables too (with --vars only)
(not built-in because NO_DWARF=1)
--no-inlines Don't search inlined functions
(not built-in because NO_DWARF=1)
--range Show variables location range in scope (with --vars only)
(not built-in because NO_DWARF=1)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1450089563-122430-14-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Although previous patch allows setting BPF compiler related options in
perfconfig, on some ad-hoc situation it still requires passing options
through cmdline. This patch introduces 2 options to 'perf record' for
this propose: --clang-path and --clang-opt.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-9-git-send-email-wangnan0@huawei.com
[ Add the new options to the 'record' man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now usage_with_options() setup a pager before printing message so normal
printf() or pr_err() will not be shown. The usage_with_options_msg()
can be used to print some help message before usage strings.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --call-graph option is complex so we should provide better guide for
users. Also change help message to be consistent with config option
names. Now perf top will show help like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]>
setup and enables call-graph (stack chain/backtrace):
record_mode: call graph recording mode (fp|dwarf|lbr)
record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>)
default: 8192 (bytes)
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: fp,graph,0.5,caller,function
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These messages will be used by 'perf top' in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When run "perf record -e", the number of samples showed up is wrong on some
32 bit systems, i.e. powerpc and arm.
For example, run the below commands on 32 bit powerpc:
perf probe -x /lib/libc.so.6 malloc
perf record -e probe_libc:malloc -a ls perf.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.036 MB perf.data (13829241621624967218 samples) ]
Actually, "perf script" just shows 21 samples. The number of samples is also
absurd since samples is long type, but it is printed as PRIu64.
Build test ran on x86-64, x86, aarch64, arm, mips, ppc and ppc64.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/1443563383-4064-1-git-send-email-yang.shi@linaro.org
[ Bumped the 'hits' var used together with record.samples to 'unsigned long long' too ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A previous patch added a synthesized comm event for forked child process
but it missed that the event should contain area for sample_id_hdr at
the end. It worked by accident since the perf_event union contains
bigger event structs like mmap_events.
This patch fixes it by dynamically allocating event struct including
those area like in perf_event__synthesize_thread_map().
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf creates a new child to profile, the events are enabled on
exec(). And in this case, it doesn't synthesize any event for the
child since they'll be generated during exec(). But there's an window
between the enabling and the event generation.
It used to be overcome since samples are only in kernel (so we always
have the map) and the comm is overridden by a later COMM event.
However it won't work if events are processed and displayed before the
COMM event overrides like in 'perf script'. This leads to those early
samples (like native_write_msr_safe) not having a comm but pid (like
':15328').
So it needs to synthesize COMM event for the child explicitly before
enabling so that it can have a correct comm. But at this time, the
comm will be "perf" since it's not exec-ed yet.
Committer note:
Before this patch:
# perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
# perf script --show-task-events
:4429 4429 27909.079372: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079375: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079376: 10 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079377: 223 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079378: 6571 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
usleep 4429 27909.079380: PERF_RECORD_COMM exec: usleep:4429/4429
usleep 4429 27909.079381: 185403 cycles: ffffffff810a72d3 flush_signal_handlers (/lib/modules/4.
usleep 4429 27909.079444: 2241110 cycles: 7fc575355be3 _dl_start (/usr/lib64/ld-2.20.so)
usleep 4429 27909.079875: PERF_RECORD_EXIT(4429:4429):(4429:4429)
After:
# perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
# perf script --show-task
perf 0 0.000000: PERF_RECORD_COMM: perf:8446/8446
perf 8446 30154.038944: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038948: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038949: 9 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038950: 230 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038951: 6772 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
usleep 8446 30154.038952: PERF_RECORD_COMM exec: usleep:8446/8446
usleep 8446 30154.038954: 196923 cycles: ffffffff81766440 _raw_spin_lock (/lib/modules/4.3.0-rc1
usleep 8446 30154.039021: 2292130 cycles: 7f609a173dc4 memcpy (/usr/lib64/ld-2.20.so)
usleep 8446 30154.039349: PERF_RECORD_EXIT(8446:8446):(8446:8446)
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1442881495-2928-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies the -I/--int-regs option to enablepassing the name
of the registers to sample on interrupt. Registers can be specified by
their symbolic names. For instance on x86, --intr-regs=ax,si.
The motivation is to reduce the size of the perf.data file and the
overhead of sampling by only collecting the registers useful to a
specific analysis. For instance, for value profiling, sampling only the
registers used to passed arguements to functions.
With no parameter, the --intr-regs still records all possible registers
based on the architecture.
To name registers, it is necessary to use the long form of the option,
i.e., --intr-regs:
$ perf record --intr-regs=si,di,r8,r9 .....
To record any possible registers:
$ perf record -I .....
$ perf report --intr-regs ...
To display the register, one can use perf report -D
To list the available registers:
$ perf record --intr-regs=\?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An evsel may have different cpus and threads than the evlist it is in.
Use it's own cpus and threads, when opening the evsel in 'perf record'.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1440138194-17001-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After recording, 'perf record' post-processes the data to determine
which buildids are needed.
That processing must process the data in time order, if possible,
because otherwise dependent events, like forks and mmaps, will not make
sense.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-4-git-send-email-adrian.hunter@intel.com
[ Moved the sample_id_add to after trying to open the events, use pr_warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass global callchain_param into parse_callchain_record_opt and
perf_evsel__config_callgraph as parameter. So we can reuse these
functions to parse/config local param for callchain.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438677022-34296-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce callgraph_set to indicate whether the callgraph option was set
by user.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows 'perf record' to exclude events issued by perf itself
by '--exclude-perf' option.
Before this patch, when doing something like:
# perf record -a -e syscalls:sys_enter_write <cmd>
One could easily get result like this:
# /tmp/perf report --stdio
...
# Overhead Command Shared Object Symbol
# ........ ....... .................. ....................
#
99.99% perf libpthread-2.18.so [.] __write_nocancel
0.01% ls libc-2.18.so [.] write
0.01% sshd libc-2.18.so [.] write
...
Where most events are generated by perf itself.
A shell trick can be done to filter perf itself out:
# cat << EOF > ./tmp
> #!/bin/sh
> exec perf record -e ... --filter="common_pid != \$\$" -a sleep 10
> EOF
# chmod a+x ./tmp
# ./tmp
However, doing so is user unfriendly.
This patch extracts evsel iteration framework introduced by patch 'perf
record: Apply filter to all events in a glob matching' into
foreach_evsel_in_last_glob(), and makes exclude_perf() function append
new filter expression to each evsel selected by a '-e' selector.
To avoid losing filters if user pass '--filter' after '--exclude-perf',
this patch uses perf_evsel__append_filter() in both case, instead of
perf_evsel__set_filter() which removes old filter. As a side effect, now
it is possible to use multiple '--filter' option for one selector. They
are combinded with '&&'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436513770-8896-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the option -T is used with option --per-thread, then time is still
not sampled. Fix that by using OPT_BOOLEAN_SET to distinguish when the
user used the -T option as opposed to the default case when timestamps
are enabled but only for per-cpu recording.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1436183461-1918-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The time out to limit the individual proc map processing was hard code
to 500ms. This patch introduce a new option --proc-map-timeout to make
the time limit configurable.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because there's too many options and I cannot read, I frequently get
confused between -c and -P, and try to do things like:
perf record -P 50000 -- foo
Which does not work; try and make the option description slightly longer
and hopefully less confusing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150610144850.GP19282@twins.programming.kicks-ass.net
[ Do those changes on the man page as well ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The size of perf.data is missing update in no-buildid mode, which gives
wrong output result.
Before this patch:
$ perf.perf record -B -e syscalls:sys_enter_open uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB perf.data ]
After this patch:
$ perf.perf record -B -e syscalls:sys_enter_open uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data ]
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819050-30511-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
.. to allow sharing between builtin-record and builtin-top later. No
code changes, just moved code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1432749114-904-9-git-send-email-andi@firstfloor.org
[ Rename too generic branch.[ch] name to parse-branch-options.[ch] ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new option and support for Instruction Tracing Snapshot Mode.
When the new option is selected, no AUX area tracing data is captured
until a signal (SIGUSR2) is received.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add build option NO_AUXTRACE to exclude compiling support for AUX area
tracing. Support for both recording and processing is excluded and by
implication any future additions such as Intel PT and Intel BTS will
also not be compiled in with this option.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to include all buildids when a perf.data file contains AUX area
tracing data because we do not decode the trace for that purpose because
it would take too long.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an index of AUX area tracing events within a perf.data file.
perf record uses a special user event PERF_RECORD_FINISHED_ROUND to
enable sorting of events in chunks instead of having to sort all events
altogether.
AUX area tracing events contain data that can span back to the very
beginning of the recording period. i.e. they do not obey the rules of
PERF_RECORD_FINISHED_ROUND.
By adding an index, AUX area tracing events can be found in advance and
the PERF_RECORD_FINISHED_ROUND approach works as usual.
The index is recorded with the auxtrace feature in the perf.data file.
A session reads the index but does not process it. An AUX area decoder
can queue all the AUX area data in advance using
auxtrace_queues__process_index() or otherwise process the index in some
custom manner.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend the -m option so that the number of mmap pages for AUX area
tracing can be specified by adding a comma followed by the number of
pages.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Amend the perf record tool to read the AUX area tracing mmap and
synthesize AUX area tracing events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The data_head and data_tail fields are defined as __u64 in
linux/perf_event.h, but perf userspace uses int and unsigned int.
Convert all references to u64 for consistency.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428420037-26599-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach perf-record about the new perf_event_attr::{use_clockid, clockid}
fields. Add a simple parameter to set the clock (if any) to be used for
the events to be recorded into the data file.
Since we store the entire perf_event_attr in the EVENT_DESC section we
also already store the used clockid in the data file.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/r/20150407154851.GR23123@twins.programming.kicks-ass.net
[ Conditionally define CLOCK_BOOTTIME, at least rhel6 doesn't have it - dsahern
Ditto for CLOCK_MONOTONIC_RAW, sles11sp2 doesn't have it - yunlong.song ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use of a bad filter currently generates the message:
Error: failed to set filter with 22 (Invalid argument)
Add the event name to make it clear to which event the filter
failed to apply:
Error: Failed to set filter "foo" on event sched:sg_lb_stats: 22: Invalid argument
To test it use something like:
# perf record -e sched:sched_switch -e sched:*fork --filter parent_pid==1 -e sched:*wait* --filter bla usleep 1
Error: failed to set filter "bla" on event sched:sched_stat_iowait with 22 (Invalid argument)
#
Based-on-a-patch-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d7gq2fjvaecozp9o2i0siifu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By keeping pointers to machines, evlist and tool in ordered_events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0c6huyaf59mqtm2ek9pmposl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to perf record to record running/enabled time for read
events, similar to what stat does.
This is useful to understand multiplexing problems.
Right now the report support is not great, but at least report -D
already supports it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1424819620-16043-1-git-send-email-andi@firstfloor.org
[ Fixed the Documentation entry to match the OPT_BOOLEAN one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
