It is particularly important for the userns mount case (when a sensible
nr_inodes maximum may not be enforced) that tmpfs user xattrs be subject
to memory cgroup limiting. Leave temporary buffer allocations as is,
but change the persistent simple xattr allocations from GFP_KERNEL to
GFP_KERNEL_ACCOUNT. This limits kernfs's cgroupfs too, but that's good.
(I had intended to send this change earlier, but had been confused by
shmem_alloc_inode() using GFP_KERNEL, and thought a discussion would be
needed to change that too: no, I was forgetting the SLAB_ACCOUNT on that
kmem_cache, which implicitly adds __GFP_ACCOUNT to all its allocations.)
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <f6953e5a-4183-8314-38f2-40be60998615@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Before adding a port to bond, it need to be set down first. In the
lacpdu test the author set the port down specifically. But commit
a4abfa627c ("net: rtnetlink: Enslave device before bringing it up")
changed the operation order, the kernel will set the port down _after_
adding to bond. So all the ports will be down at last and the test failed.
In fact, the veth interfaces are already inactive when added. This
means there's no need to set them down again before adding to the bond.
Let's just remove the link down operation.
Fixes: a4abfa627c ("net: rtnetlink: Enslave device before bringing it up")
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Closes: https://lore.kernel.org/netdev/a0ef07c7-91b0-94bd-240d-944a330fcabd@huawei.com/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230817082459.1685972-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When cross-building the arm64 kernel with allmodconfig using GCC 9.4,
the following error occurs on multiple files under samples/ftrace/:
/tmp/ccPC1ODs.s: Assembler messages:
/tmp/ccPC1ODs.s:8: Error: selected processor does not support `bti c'
Fix this issue by replacing `bti c` with `hint 34`, which is compatible
for the older compiler.
Link: https://lore.kernel.org/linux-trace-kernel/20230820111509.1470826-1-gongruiqi@huaweicloud.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Fixes: 8c3526fb86 ("arm64: ftrace: Add direct call trampoline samples support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The qunipro_g4_sel clear is also needed for new platforms with major
version > 5. Fix the version check to take this into account.
Fixes: 9c02aa24bf ("scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230821-topic-sm8x50-upstream-ufs-major-5-plus-v2-1-f42a4b712e58@linaro.org
Reviewed-by: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The search and wrap around logic in the ufshcd_mcq_sqe_search() function
does not work correctly when the hwq's queue depth is not a power of two
number. Correct it so that any queue depth with a positive integer value
within the supported range would work.
Signed-off-by: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/ff49c15be205135ed3ec186f3086694c02867dbd.1692149603.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Fixes: 8d72903489 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit 0f8e565109
("of/platform: Propagate firmware node by calling device_set_node()")
use of_fwnode_handle to replace of_node_get, which introduces a side
effect that the refcount is not increased. Then the out of tree
jailhouse hypervisor enable/disable test will trigger kernel dump in
of_overlay_remove, with the following sequence
"
of_changeset_revert(&overlay_changeset);
of_changeset_destroy(&overlay_changeset);
of_overlay_remove(&overlay_id);
"
So increase the refcount to avoid issues.
This patch also release the refcount when releasing amba device to avoid
refcount leakage.
Fixes: 0f8e565109 ("of/platform: Propagate firmware node by calling device_set_node()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230821023928.3324283-2-peng.fan@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
When a memcg is in the process of being released mem_cgroup_tryget will
fail because its reference count has already reached 0. This can happen
during reclaim if the memcg has already been offlined, and we reclaim all
remaining pages attributed to the offlined memcg. shrink_many attempts to
skip the empty memcg in this case, and continue reclaiming from the
remaining memcgs in the old generation. If there is only one memcg
remaining, or if all remaining memcgs are in the process of being released
then shrink_many will spin until all memcgs have finished being released.
The release occurs through a workqueue, so it can take a while before
kswapd is able to make any further progress.
This fix results in reductions in kswapd activity and direct reclaim in
a test where 28 apps (working set size > total memory) are repeatedly
launched in a random sequence:
A B delta ratio(%)
allocstall_movable 5962 3539 -2423 -40.64
allocstall_normal 2661 2417 -244 -9.17
kswapd_high_wmark_hit_quickly 53152 7594 -45558 -85.71
pageoutrun 57365 11750 -45615 -79.52
Link: https://lkml.kernel.org/r/20230814151636.1639123-1-tjmercier@google.com
Fixes: e4dde56cd2 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When page_handle_poison() fails to handle the hugepage or free page in
retry path, soft_offline_page() will return 0 while -EBUSY is expected in
this case.
Consequently the user will think soft_offline_page succeeds while it in
fact failed. So the user will not try again later in this case.
Link: https://lkml.kernel.org/r/20230627112808.1275241-1-linmiaohe@huawei.com
Fixes: b94e02822d ("mm,hwpoison: try to narrow window race for free pages")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Recent versions of clang warn about an unused variable, though older
versions saw the 'slot++' as a use and did not warn:
radix-tree.c:1136:50: error: parameter 'slot' set but not used [-Werror,-Wunused-but-set-parameter]
It's clearly not needed any more, so just remove it.
Link: https://lkml.kernel.org/r/20230811131023.2226509-1-arnd@kernel.org
Fixes: 3a08cd52c3 ("radix tree: Remove multiorder support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Rong Tao <rongtao@cestc.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
flush_cache_vmap() must be called after new vmalloc mappings are installed
in the page table in order to allow architectures to make sure the new
mapping is visible.
It could lead to a panic since on some architectures (like powerpc),
the page table walker could see the wrong pte value and trigger a
spurious page fault that can not be resolved (see commit f1cb8f9beb
("powerpc/64s/radix: avoid ptesync after set_pte and
ptep_set_access_flags")).
But actually the patch is aiming at riscv: the riscv specification
allows the caching of invalid entries in the TLB, and since we recently
removed the vmalloc page fault handling, we now need to emit a tlb
shootdown whenever a new vmalloc mapping is emitted
(https://lore.kernel.org/linux-riscv/20230725132246.817726-1-alexghiti@rivosinc.com/).
That's a temporary solution, there are ways to avoid that :)
Link: https://lkml.kernel.org/r/20230809164633.1556126-1-alexghiti@rivosinc.com
Fixes: 3e9a9e256b ("mm: add a vmap_pfn function")
Reported-by: Dylan Jhong <dylan@andestech.com>
Closes: https://lore.kernel.org/linux-riscv/ZMytNY2J8iyjbPPy@atctrx.andestech.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Dylan Jhong <dylan@andestech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 2c2241081f ("mm/gup: move private gup FOLL_ flags to
internal.h") FOLL_LONGTERM flag value got updated from 0x10000 to 0x100 at
include/linux/mm_types.h.
As hmm.hmm_device_private.hmm_gup_test uses FOLL_LONGTERM Updating same
here as well.
Before this change test goes in an infinite assert loop in
hmm.hmm_device_private.hmm_gup_test
==========================================================
RUN hmm.hmm_device_private.hmm_gup_test ...
hmm-tests.c:1962:hmm_gup_test:Expected HMM_DMIRROR_PROT_WRITE..
..(2) == m[2] (34)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
...
==========================================================
Call Trace:
<TASK>
? sched_clock+0xd/0x20
? __lock_acquire.constprop.0+0x120/0x6c0
? ktime_get+0x2c/0xd0
? sched_clock+0xd/0x20
? local_clock+0x12/0xd0
? lock_release+0x26e/0x3b0
pin_user_pages_fast+0x4c/0x70
gup_test_ioctl+0x4ff/0xbb0
? gup_test_ioctl+0x68c/0xbb0
__x64_sys_ioctl+0x99/0xd0
do_syscall_64+0x60/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? irqentry_exit_to_user_mode+0xd/0x20
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x96/0x200
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f6aaa31aaff
After this change test is able to pass successfully.
Link: https://lkml.kernel.org/r/20230808124347.79163-1-ayush.jain3@amd.com
Fixes: 2c2241081f ("mm/gup: move private gup FOLL_ flags to internal.h")
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: Raghavendra K T <raghavendra.kt@amd.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A syzbot stress test reported that create_empty_buffers() called from
nilfs_lookup_dirty_data_buffers() can cause a general protection fault.
Analysis using its reproducer revealed that the back reference "mapping"
from a page/folio has been changed to NULL after dirty page/folio gang
lookup in nilfs_lookup_dirty_data_buffers().
Fix this issue by excluding pages/folios from being collected if, after
acquiring a lock on each page/folio, its back reference "mapping" differs
from the pointer to the address space struct that held the page/folio.
Link: https://lkml.kernel.org/r/20230805132038.6435-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+0ad741797f4565e7e2d2@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000002930a705fc32b231@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In contrast to most other GUP code, GUP-fast common page table walking
code like gup_pte_range() also handles hugetlb pages. But in contrast to
other hugetlb page table walking code, it does not look at the hugetlb PTE
abstraction whereby we have only a single logical hugetlb PTE per hugetlb
page, even when using multiple cont-PTEs underneath -- which is for
example what huge_ptep_get() abstracts.
So when we have a hugetlb page that is mapped via cont-PTEs, GUP-fast
might stumble over a PTE that does not map the head page of a hugetlb page
-- not the first "head" PTE of such a cont mapping.
Logically, the whole hugetlb page is mapped (entire_mapcount == 1), but we
might end up calling gup_must_unshare() with a tail page of a hugetlb
page.
We only maintain a single PageAnonExclusive flag per hugetlb page (as
hugetlb pages cannot get partially COW-shared), stored for the head page.
That flag is clear for all tail pages.
So when gup_must_unshare() ends up calling PageAnonExclusive() with a tail
page of a hugetlb page:
1) With CONFIG_DEBUG_VM_PGFLAGS
Stumbles over the:
VM_BUG_ON_PGFLAGS(PageHuge(page) && !PageHead(page), page);
For example, when executing the COW selftests with 64k hugetlb pages on
arm64:
[ 61.082187] page:00000000829819ff refcount:3 mapcount:1 mapping:0000000000000000 index:0x1 pfn:0x11ee11
[ 61.082842] head:0000000080f79bf7 order:4 entire_mapcount:1 nr_pages_mapped:0 pincount:2
[ 61.083384] anon flags: 0x17ffff80003000e(referenced|uptodate|dirty|head|mappedtodisk|node=0|zone=2|lastcpupid=0xfffff)
[ 61.084101] page_type: 0xffffffff()
[ 61.084332] raw: 017ffff800000000 fffffc00037b8401 0000000000000402 0000000200000000
[ 61.084840] raw: 0000000000000010 0000000000000000 00000000ffffffff 0000000000000000
[ 61.085359] head: 017ffff80003000e ffffd9e95b09b788 ffffd9e95b09b788 ffff0007ff63cf71
[ 61.085885] head: 0000000000000000 0000000000000002 00000003ffffffff 0000000000000000
[ 61.086415] page dumped because: VM_BUG_ON_PAGE(PageHuge(page) && !PageHead(page))
[ 61.086914] ------------[ cut here ]------------
[ 61.087220] kernel BUG at include/linux/page-flags.h:990!
[ 61.087591] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 61.087999] Modules linked in: ...
[ 61.089404] CPU: 0 PID: 4612 Comm: cow Kdump: loaded Not tainted 6.5.0-rc4+ #3
[ 61.089917] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 61.090409] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 61.090897] pc : gup_must_unshare.part.0+0x64/0x98
[ 61.091242] lr : gup_must_unshare.part.0+0x64/0x98
[ 61.091592] sp : ffff8000825eb940
[ 61.091826] x29: ffff8000825eb940 x28: 0000000000000000 x27: fffffc00037b8440
[ 61.092329] x26: 0400000000000001 x25: 0000000000080101 x24: 0000000000080000
[ 61.092835] x23: 0000000000080100 x22: ffff0000cffb9588 x21: ffff0000c8ec6b58
[ 61.093341] x20: 0000ffffad6b1000 x19: fffffc00037b8440 x18: ffffffffffffffff
[ 61.093850] x17: 2864616548656761 x16: 5021202626202965 x15: 6761702865677548
[ 61.094358] x14: 6567615028454741 x13: 2929656761702864 x12: 6165486567615021
[ 61.094858] x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffd9e958b7a1c0
[ 61.095359] x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 00000000002bffa8
[ 61.095873] x5 : ffff0008bb19e708 x4 : 0000000000000000 x3 : 0000000000000000
[ 61.096380] x2 : 0000000000000000 x1 : ffff0000cf6636c0 x0 : 0000000000000046
[ 61.096894] Call trace:
[ 61.097080] gup_must_unshare.part.0+0x64/0x98
[ 61.097392] gup_pte_range+0x3a8/0x3f0
[ 61.097662] gup_pgd_range+0x1ec/0x280
[ 61.097942] lockless_pages_from_mm+0x64/0x1a0
[ 61.098258] internal_get_user_pages_fast+0xe4/0x1d0
[ 61.098612] pin_user_pages_fast+0x58/0x78
[ 61.098917] pin_longterm_test_start+0xf4/0x2b8
[ 61.099243] gup_test_ioctl+0x170/0x3b0
[ 61.099528] __arm64_sys_ioctl+0xa8/0xf0
[ 61.099822] invoke_syscall.constprop.0+0x7c/0xd0
[ 61.100160] el0_svc_common.constprop.0+0xe8/0x100
[ 61.100500] do_el0_svc+0x38/0xa0
[ 61.100736] el0_svc+0x3c/0x198
[ 61.100971] el0t_64_sync_handler+0x134/0x150
[ 61.101280] el0t_64_sync+0x17c/0x180
[ 61.101543] Code: aa1303e0 f00074c1 912b0021 97fffeb2 (d4210000)
2) Without CONFIG_DEBUG_VM_PGFLAGS
Always detects "not exclusive" for passed tail pages and refuses to PIN
the tail pages R/O, as gup_must_unshare() == true. GUP-fast will fallback
to ordinary GUP. As ordinary GUP properly considers the logical hugetlb
PTE abstraction in hugetlb_follow_page_mask(), pinning the page will
succeed when looking at the PageAnonExclusive on the head page only.
So the only real effect of this is that with cont-PTE hugetlb pages, we'll
always fallback from GUP-fast to ordinary GUP when not working on the head
page, which ends up checking the head page and do the right thing.
Consequently, the cow selftests pass with cont-PTE hugetlb pages as well
without CONFIG_DEBUG_VM_PGFLAGS.
Note that this only applies to anon hugetlb pages that are mapped using
cont-PTEs: for example 64k hugetlb pages on a 4k arm64 kernel.
... and only when R/O-pinning (FOLL_PIN) such pages that are mapped into
the page table R/O using GUP-fast.
On production kernels (and even most debug kernels, that don't set
CONFIG_DEBUG_VM_PGFLAGS) this patch should theoretically not be required
to be backported. But of course, it does not hurt.
Link: https://lkml.kernel.org/r/20230805101256.87306-1-david@redhat.com
Fixes: a7f2266041 ("mm/gup: trigger FAULT_FLAG_UNSHARE when R/O-pinning a possibly shared anonymous page")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
test_kmem_basic creates 100,000 negative dentries, with each one mapping
to a slab object. After memory.high is set, these are reclaimed through
the shrink_slab function call which reclaims all 100,000 entries. The
test passes the majority of the time because when slab1 or current is
calculated, it is often above 0, however, 0 is also an acceptable value.
Link: https://lkml.kernel.org/r/7d6gcuyzdjcice6qbphrmpmv5skr5jtglg375unnjxqhstvhxc@qkn6dw6bao6v
Signed-off-by: Lucas Karpinski <lkarpins@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
walk_page_range() and friends often operate under write-locked mmap_lock.
With introduction of vma locks, the vmas have to be locked as well during
such walks to prevent concurrent page faults in these areas. Add an
additional member to mm_walk_ops to indicate locking requirements for the
walk.
The change ensures that page walks which prevent concurrent page faults
by write-locking mmap_lock, operate correctly after introduction of
per-vma locks. With per-vma locks page faults can be handled under vma
lock without taking mmap_lock at all, so write locking mmap_lock would
not stop them. The change ensures vmas are properly locked during such
walks.
A sample issue this solves is do_mbind() performing queue_pages_range()
to queue pages for migration. Without this change a concurrent page
can be faulted into the area and be left out of migration.
Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Suggested-by: Jann Horn <jannh@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We shouldn't be using a GUP-internal helper if it can be avoided.
Similar to smaps_pte_entry() that uses vm_normal_page(), let's use
vm_normal_page_pmd() that similarly refuses to return the huge zeropage.
In contrast to follow_trans_huge_pmd(), vm_normal_page_pmd():
(1) Will always return the head page, not a tail page of a THP.
If we'd ever call smaps_account with a tail page while setting "compound
= true", we could be in trouble, because smaps_account() would look at
the memmap of unrelated pages.
If we're unlucky, that memmap does not exist at all. Before we removed
PG_doublemap, we could have triggered something similar as in
commit 24d7275ce2 ("fs/proc: task_mmu.c: don't read mapcount for
migration entry").
This can theoretically happen ever since commit ff9f47f6f0 ("mm: proc:
smaps_rollup: do not stall write attempts on mmap_lock"):
(a) We're in show_smaps_rollup() and processed a VMA
(b) We release the mmap lock in show_smaps_rollup() because it is
contended
(c) We merged that VMA with another VMA
(d) We collapsed a THP in that merged VMA at that position
If the end address of the original VMA falls into the middle of a THP
area, we would call smap_gather_stats() with a start address that falls
into a PMD-mapped THP. It's probably very rare to trigger when not
really forced.
(2) Will succeed on a is_pci_p2pdma_page(), like vm_normal_page()
Treat such PMDs here just like smaps_pte_entry() would treat such PTEs.
If such pages would be anonymous, we most certainly would want to
account them.
(3) Will skip over pmd_devmap(), like vm_normal_page() for pte_devmap()
As noted in vm_normal_page(), that is only for handling legacy ZONE_DEVICE
pages. So just like smaps_pte_entry(), we'll now also ignore such PMD
entries.
Especially, follow_pmd_mask() never ends up calling
follow_trans_huge_pmd() on pmd_devmap(). Instead it calls
follow_devmap_pmd() -- which will fail if neither FOLL_GET nor FOLL_PIN
is set.
So skipping pmd_devmap() pages seems to be the right thing to do.
(4) Will properly handle VM_MIXEDMAP/VM_PFNMAP, like vm_normal_page()
We won't be returning a memmap that should be ignored by core-mm, or
worse, a memmap that does not even exist. Note that while
walk_page_range() will skip VM_PFNMAP mappings, walk_page_vma() won't.
Most probably this case doesn't currently really happen on the PMD level,
otherwise we'd already be able to trigger kernel crashes when reading
smaps / smaps_rollup.
So most probably only (1) is relevant in practice as of now, but could only
cause trouble in extreme corner cases.
Let's move follow_trans_huge_pmd() to mm/internal.h to discourage future
reuse in wrong context.
Link: https://lkml.kernel.org/r/20230803143208.383663-3-david@redhat.com
Fixes: ff9f47f6f0 ("mm: proc: smaps_rollup: do not stall write attempts on mmap_lock")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: liubo <liubo254@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unfortunately commit 474098edac ("mm/gup: replace FOLL_NUMA by
gup_can_follow_protnone()") missed that follow_page() and
follow_trans_huge_pmd() never implicitly set FOLL_NUMA because they really
don't want to fail on PROT_NONE-mapped pages -- either due to NUMA hinting
or due to inaccessible (PROT_NONE) VMAs.
As spelled out in commit 0b9d705297 ("mm: numa: Support NUMA hinting
page faults from gup/gup_fast"): "Other follow_page callers like KSM
should not use FOLL_NUMA, or they would fail to get the pages if they use
follow_page instead of get_user_pages."
liubo reported [1] that smaps_rollup results are imprecise, because they
miss accounting of pages that are mapped PROT_NONE. Further, it's easy to
reproduce that KSM no longer works on inaccessible VMAs on x86-64, because
pte_protnone()/pmd_protnone() also indictaes "true" in inaccessible VMAs,
and follow_page() refuses to return such pages right now.
As KVM really depends on these NUMA hinting faults, removing the
pte_protnone()/pmd_protnone() handling in GUP code completely is not
really an option.
To fix the issues at hand, let's revive FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
to restore the original behavior for now and add better comments.
Set FOLL_HONOR_NUMA_FAULT independent of FOLL_FORCE in
is_valid_gup_args(), to add that flag for all external GUP users.
Note that there are three GUP-internal __get_user_pages() users that don't
end up calling is_valid_gup_args() and consequently won't get
FOLL_HONOR_NUMA_FAULT set.
1) get_dump_page(): we really don't want to handle NUMA hinting
faults. It specifies FOLL_FORCE and wouldn't have honored NUMA
hinting faults already.
2) populate_vma_page_range(): we really don't want to handle NUMA hinting
faults. It specifies FOLL_FORCE on accessible VMAs, so it wouldn't have
honored NUMA hinting faults already.
3) faultin_vma_page_range(): we similarly don't want to handle NUMA
hinting faults.
To make the combination of FOLL_FORCE and FOLL_HONOR_NUMA_FAULT work in
inaccessible VMAs properly, we have to perform VMA accessibility checks in
gup_can_follow_protnone().
As GUP-fast should reject such pages either way in
pte_access_permitted()/pmd_access_permitted() -- for example on x86-64 and
arm64 that both implement pte_protnone() -- let's just always fallback to
ordinary GUP when stumbling over pte_protnone()/pmd_protnone().
As Linus notes [2], honoring NUMA faults might only make sense for
selected GUP users.
So we should really see if we can instead let relevant GUP callers specify
it manually, and not trigger NUMA hinting faults from GUP as default.
Prepare for that by making FOLL_HONOR_NUMA_FAULT an external GUP flag and
adding appropriate documenation.
While at it, remove a stale comment from follow_trans_huge_pmd(): That
comment for pmd_protnone() was added in commit 2b4847e730 ("mm: numa:
serialise parallel get_user_page against THP migration"), which noted:
THP does not unmap pages due to a lack of support for migration
entries at a PMD level. This allows races with get_user_pages
Nowadays, we do have PMD migration entries, so the comment no longer
applies. Let's drop it.
[1] https://lore.kernel.org/r/20230726073409.631838-1-liubo254@huawei.com
[2] https://lore.kernel.org/r/CAHk-=wgRiP_9X0rRdZKT8nhemZGNateMtb366t37d8-x7VRs=g@mail.gmail.com
Link: https://lkml.kernel.org/r/20230803143208.383663-2-david@redhat.com
Fixes: 474098edac ("mm/gup: replace FOLL_NUMA by gup_can_follow_protnone()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: liubo <liubo254@huawei.com>
Closes: https://lore.kernel.org/r/20230726073409.631838-1-liubo254@huawei.com
Reported-by: Peter Xu <peterx@redhat.com>
Closes: https://lore.kernel.org/all/ZMKJjDaqZ7FW0jfe@x1n/
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
NULL pointer dereference in ice_reset_vf that VF's VSI is null.
More than one instance of ice_reset_vf() can be running at a given
time. When we rebuild the VSI in ice_reset_vf, another reset can be
triaged from ice_service_task. In this case we can access the currently
uninitialized VSI and cause panic. The window for this racing condition
has been around for a long time but it's much worse after commit
227bf4500a ("ice: move VSI delete outside deconfig") because
the reset runs faster. ice_reset_vf() using vf->cfg_lock and when
we move this lock before accessing to the VF VSI, we can fix
BUG for all cases.
Panic occurs sometimes in ice_vsi_is_rx_queue_active() and sometimes
in ice_vsi_stop_all_rx_rings()
With our reproducer, we can hit BUG:
~8h before commit 227bf4500a ("ice: move VSI delete outside deconfig").
~20m after commit 227bf4500a ("ice: move VSI delete outside deconfig").
After this fix we are not able to reproduce it after ~48h
There was commit cf90b74341 ("ice: Fix call trace with null VSI during
VF reset") which also tried to fix this issue, but it was only
partially resolved and the bug still exists.
[ 6420.658415] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6420.665382] #PF: supervisor read access in kernel mode
[ 6420.670521] #PF: error_code(0x0000) - not-present page
[ 6420.675659] PGD 0
[ 6420.677679] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 6420.682038] CPU: 53 PID: 326472 Comm: kworker/53:0 Kdump: loaded Not tainted 5.14.0-317.el9.x86_64 #1
[ 6420.691250] Hardware name: Dell Inc. PowerEdge R750/04V528, BIOS 1.6.5 04/15/2022
[ 6420.698729] Workqueue: ice ice_service_task [ice]
[ 6420.703462] RIP: 0010:ice_vsi_is_rx_queue_active+0x2d/0x60 [ice]
[ 6420.705860] ice 0000:ca:00.0: VF 0 is now untrusted
[ 6420.709494] Code: 00 00 66 83 bf 76 04 00 00 00 48 8b 77 10 74 3e 31 c0 eb 0f 0f b7 97 76 04 00 00 48 83 c0 01 39 c2 7e 2b 48 8b 97 68 04 00 00 <0f> b7 0c 42 48 8b 96 20 13 00 00 48 8d 94 8a 00 00 12 00 8b 12 83
[ 6420.714426] ice 0000:ca:00.0 ens7f0: Setting MAC 22:22:22:22:22:00 on VF 0. VF driver will be reinitialized
[ 6420.733120] RSP: 0018:ff778d2ff383fdd8 EFLAGS: 00010246
[ 6420.733123] RAX: 0000000000000000 RBX: ff2acf1916294000 RCX: 0000000000000000
[ 6420.733125] RDX: 0000000000000000 RSI: ff2acf1f2c6401a0 RDI: ff2acf1a27301828
[ 6420.762346] RBP: ff2acf1a27301828 R08: 0000000000000010 R09: 0000000000001000
[ 6420.769476] R10: ff2acf1916286000 R11: 00000000019eba3f R12: ff2acf19066460d0
[ 6420.776611] R13: ff2acf1f2c6401a0 R14: ff2acf1f2c6401a0 R15: 00000000ffffffff
[ 6420.783742] FS: 0000000000000000(0000) GS:ff2acf28ffa80000(0000) knlGS:0000000000000000
[ 6420.791829] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6420.797575] CR2: 0000000000000000 CR3: 00000016ad410003 CR4: 0000000000773ee0
[ 6420.804708] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6420.811034] vfio-pci 0000:ca:01.0: enabling device (0000 -> 0002)
[ 6420.811840] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6420.811841] PKRU: 55555554
[ 6420.811842] Call Trace:
[ 6420.811843] <TASK>
[ 6420.811844] ice_reset_vf+0x9a/0x450 [ice]
[ 6420.811876] ice_process_vflr_event+0x8f/0xc0 [ice]
[ 6420.841343] ice_service_task+0x23b/0x600 [ice]
[ 6420.845884] ? __schedule+0x212/0x550
[ 6420.849550] process_one_work+0x1e2/0x3b0
[ 6420.853563] ? rescuer_thread+0x390/0x390
[ 6420.857577] worker_thread+0x50/0x3a0
[ 6420.861242] ? rescuer_thread+0x390/0x390
[ 6420.865253] kthread+0xdd/0x100
[ 6420.868400] ? kthread_complete_and_exit+0x20/0x20
[ 6420.873194] ret_from_fork+0x1f/0x30
[ 6420.876774] </TASK>
[ 6420.878967] Modules linked in: vfio_pci vfio_pci_core vfio_iommu_type1 vfio iavf vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_counter nf_tables bridge stp llc sctp ip6_udp_tunnel udp_tunnel nfp tls nfnetlink bluetooth mlx4_en mlx4_core rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp irdma kvm_intel i40e kvm iTCO_wdt dcdbas ib_uverbs irqbypass iTCO_vendor_support mgag200 mei_me ib_core dell_smbios isst_if_mmio isst_if_mbox_pci rapl i2c_algo_bit drm_shmem_helper intel_cstate drm_kms_helper syscopyarea sysfillrect isst_if_common sysimgblt intel_uncore fb_sys_fops dell_wmi_descriptor wmi_bmof intel_vsec mei i2c_i801 acpi_ipmi ipmi_si i2c_smbus ipmi_devintf intel_pch_thermal acpi_power_meter pcspk
r
Fixes: efe4186000 ("ice: Fix memory corruption in VF driver")
Fixes: f23df5220d ("ice: Fix spurious interrupt during removal of trusted VF")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit 7255355a06.
After this commit we are not able to attach VF to VM:
virsh attach-interface v0 hostdev --managed 0000:41:01.0 --mac 52:52:52:52:52:52
error: Failed to attach interface
error: Cannot set interface MAC to 52:52:52:52:52:52 for ifname enp65s0f0np0 vf 0: Resource temporarily unavailable
ice_check_vf_ready_for_cfg() already contain waiting for reset.
New condition in ice_check_vf_ready_for_reset() causing only problems.
Fixes: 7255355a06 ("ice: Fix ice VF reset during iavf initialization")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver is misconfiguring the hardware for some values of MTU such that
it could use multiple descriptors to receive a packet when it could have
simply used one.
Change the driver to use a round-up instead of the result of a shift, as
the shift can truncate the lower bits of the size, and result in the
problem noted above. It also aligns this driver with similar code in i40e.
The insidiousness of this problem is that everything works with the wrong
size, it's just not working as well as it could, as some MTU sizes end up
using two or more descriptors, and there is no way to tell that is
happening without looking at ice_trace or a bus analyzer.
Fixes: efc2214b60 ("ice: Add support for XDP")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is race issue when concurrently splice_read main trace_pipe and
per_cpu trace_pipes which will result in data read out being different
from what actually writen.
As suggested by Steven:
> I believe we should add a ref count to trace_pipe and the per_cpu
> trace_pipes, where if they are opened, nothing else can read it.
>
> Opening trace_pipe locks all per_cpu ref counts, if any of them are
> open, then the trace_pipe open will fail (and releases any ref counts
> it had taken).
>
> Opening a per_cpu trace_pipe will up the ref count for just that
> CPU buffer. This will allow multiple tasks to read different per_cpu
> trace_pipe files, but will prevent the main trace_pipe file from
> being opened.
But because we only need to know whether per_cpu trace_pipe is open or
not, using a cpumask instead of using ref count may be easier.
After this patch, users will find that:
- Main trace_pipe can be opened by only one user, and if it is
opened, all per_cpu trace_pipes cannot be opened;
- Per_cpu trace_pipes can be opened by multiple users, but each per_cpu
trace_pipe can only be opened by one user. And if one of them is
opened, main trace_pipe cannot be opened.
Link: https://lore.kernel.org/linux-trace-kernel/20230818022645.1948314-1-zhengyejian1@huawei.com
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Encountered on an ARM Mali-T760 MP4, attempting to read the nvmem
variable can also return EOPNOTSUPP instead of ENOENT when speed
binning is unsupported.
Cc: <stable@vger.kernel.org>
Fixes: 7d690f936e ("drm/panfrost: Add basic support for speed binning")
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87msyryd7y.fsf@gmail.com
While originally it was fine to format strings using "%pOF" while
holding devtree_lock, this now causes a deadlock. Lockdep reports:
of_get_parent from of_fwnode_get_parent+0x18/0x24
^^^^^^^^^^^^^
of_fwnode_get_parent from fwnode_count_parents+0xc/0x28
fwnode_count_parents from fwnode_full_name_string+0x18/0xac
fwnode_full_name_string from device_node_string+0x1a0/0x404
device_node_string from pointer+0x3c0/0x534
pointer from vsnprintf+0x248/0x36c
vsnprintf from vprintk_store+0x130/0x3b4
Fix this by moving the printing in __of_changeset_entry_apply() outside
the lock. As the only difference in the multiple prints is the action
name, use the existing "action_names" to refactor the prints into a
single print.
Fixes: a92eb7621b ("lib/vsprintf: Make use of fwnode API to obtain node names and separators")
Cc: stable@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-2-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Remove 10us delay in cdns_spi_process_fifo() (called from cdns_spi_irq())
to fix data corruption issue on Master side when this driver
configured in Slave mode, as Slave is failed to prepare the date
on time due to above delay.
Add 10us delay before processing the RX FIFO as TX empty doesn't
guarantee valid data in RX FIFO.
Signed-off-by: Srinivas Goud <srinivas.goud@amd.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1692610216-217644-1-git-send-email-srinivas.goud@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 6f486556ab ("spi: stm32: renaming of spi_master into
spi_controller") included an accidential reverted of a change added in
commit 1e49291125 ("spi: stm32: split large transfers based on word
size instead of bytes").
This breaks large SPI transfers with word sizes > 8 bits, which are
e.g. common when driving MIPI DBI displays.
Fix this by using `spi_split_transfers_maxwords()` instead of
`spi_split_transfers_maxsize()`.
Fixes: 6f486556ab ("spi: stm32: renaming of spi_master into spi_controller")
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Link: https://lore.kernel.org/r/20230816145237.3159817-1-l.goehrs@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Thinkbook 14s Yoga ITL has 4 new symbols/shortcuts on their
F9-F11 and PrtSc keys:
F9: Has a symbol of a head with a headset, the manual says "Service key"
F10: Has a symbol of a telephone horn which has been picked up from the
receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
the manual says: "Reject incoming calls"
PrtSc: Has a symbol of a siccor and a dashed ellipse, the manual says:
"Open the Windows 'Snipping' Tool app"
This commit adds support for these 4 new hkey events.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20230819-lenovo_keys-v1-1-9d34eac88e0a@apitzsch.eu
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds my laptop Lenovo Yoga 7 14ACN6, with Product Name: 82N7
(from `dmidecode -t1 | grep "Product Name"`) to
the ec_trigger_quirk_dmi_table, have tested that this is required
for the YMC driver to work correctly on this model.
Signed-off-by: Swapnil Devesh <me@sidevesh.com>
Reviewed-by: Gergő Köteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/18a08a8b173.895ef3b250414.1213194126082324071@sidevesh.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It turns out that some PCSpecialist Elimina Pro 16 M models
have "GM6BGEQ" as DMI product-name instead of "Elimina Pro 16 M",
causing the existing DMI quirk to not work on these models.
The DMI board-name is always "GM6BGEQ", so match on that instead.
Fixes: 56fec0051a ("ACPI: resource: Add IRQ override quirk for PCSpecialist Elimina Pro 16 M")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c36
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Shubhra reports that their laptop is heating up over s2idle. Even though
it's getting into the deepest state, it appears to be having spurious
wakeup events.
While debugging a tangential issue with the RTC Carsten reports that recent
6.1.y based kernel face a similar problem.
Looking at acpidump and GPIO register comparisons these spurious wakeup
events are from the GPIO associated with the I2C touchpad on both laptops
and occur even when the touchpad is not marked as a wake source by the
kernel.
This means that the boot firmware has programmed these bits and because
Linux didn't touch them lead to spurious wakeup events from that GPIO.
To fix this issue, restore most of the code that previously would clear all
the bits associated with wakeup sources. This will allow the kernel to only
program the wake up sources that are necessary.
This is similar to what was done previously; but only the wake bits are
cleared by default instead of interrupts and wake bits. If any other
problems are reported then it may make sense to clear interrupts again too.
Cc: Sachi King <nakato@nakato.io>
Cc: stable@vger.kernel.org
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 65f6c7c91c ("pinctrl: amd: Revert "pinctrl: amd: disable and mask interrupts on probe"")
Reported-by: Shubhra Prakash Nandi <email2shubhra@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217754
Reported-by: Carsten Hatger <xmb8dsv4@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217626#c28
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230818144850.1439-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Fix race conditions in pinctrl group and function creation/remove
calls on the RZ/G2L, RZ/V2M, and RZ/A2 SoC families.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZN9QZAAKCRCKwlD9ZEnx
cPJZAQDl9k+iwv92cBngQ+wpEnhCaswVKukGm6PNbTGkcWzDsAD8CVnUfyngDtun
7Lz0rWdc5klfVVhHXYW71ylQDKFvZAc=
=HQNf
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-fixes-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into fixes
pinctrl: renesas: Fixes for v6.5 (take two)
- Fix race conditions in pinctrl group and function creation/remove
calls on the RZ/G2L, RZ/V2M, and RZ/A2 SoC families.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The commit 06470f7468 ("mac80211: add API to allow filtering frames in BA sessions")
added reorder_buf_filtered to mark frames filtered by firmware, and it
can only work correctly if hw.max_rx_aggregation_subframes <= 64 since
it stores the bitmap in a u64 variable.
However, new HE or EHT devices can support BlockAck number up to 256 or
1024, and then using a higher subframe index leads UBSAN warning:
UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39
shift exponent 215 is too large for 64-bit type 'long long unsigned int'
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
dump_stack+0x10/0x20
__ubsan_handle_shift_out_of_bounds+0x1ac/0x360
ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211]
ieee80211_sta_reorder_release+0x9c/0x400 [mac80211]
ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211]
ieee80211_rx_list+0xaef/0xf60 [mac80211]
ieee80211_rx_napi+0x53/0xd0 [mac80211]
Since only old hardware that supports <=64 BlockAck uses
ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a
WARN_ONCE() and comment to note to avoid using this function if hardware
capability is not suitable.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230818014004.16177-1-pkshih@realtek.com
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jakub asked if I'd be willing to be the maintainer of the macsec code
and review the driver code adding macsec offload, so let's add the
corresponding entry.
The keyword lines are meant to catch selftests and patches adding HW
offload support to other drivers.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=1DNA
-----END PGP SIGNATURE-----
Merge tag 'v6.5-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a regression in the caam driver and af_alg"
* tag 'v6.5-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: fix uninit-value in af_alg_free_resources
Revert "crypto: caam - adjust RNG timing to support more devices"
This might_sleep() goes back a long time: it was originally introduced
way back when by commit 010060741a ("x86: add might_sleep() to
do_page_fault()"), and made it into the generic VM code when the x86
fault path got re-organized and generalized in commit c2508ec5a5 ("mm:
introduce new 'lock_mm_and_find_vma()' page fault helper").
However, it turns out that the placement of that might_sleep() has
always been rather questionable simply because it's not only a debug
statement to warn about sleeping in contexts that shouldn't sleep (which
was the original reason for adding it), but it also implies a voluntary
scheduling point.
That, in turn, is less than desirable for two reasons:
(a) it ends up being done after we successfully got the mmap_lock, so
just as we got the lock we will now eagerly schedule away and
increase lock contention
and
(b) this is all very possibly part of the "oops, things went horribly
wrong" path and we just haven't figured that out yet
After all, the whole _reason_ for having that get_mmap_lock_carefully()
rather than just doing the obvious mmap_read_lock() is because this code
wants to deal somewhat gracefully with potential kernel wild pointer
bugs.
So then a voluntary scheduling point here is simply not a good idea.
We could certainly turn the 'might_sleep()' into a '__might_sleep()' and
make it be just the debug check that it was originally intended to be.
But even that seems questionable in the wild kernel pointer case - which
again is part of the whole point of this code. The problem wouldn't be
about the _sleeping_ part of the page fault, but about a bad kernel
access. The fact that that bad kernel access might happen in a section
that you shouldn't sleep in is secondary.
So it really ends up being the case that this is simply entirely the
wrong place to do this debug check and related scheduling point at all.
So let's just remove the check entirely. It's been around for over a
decade, it has served its purpose.
The re-schedule will happen at return to user space anyway for the
normal case, and the warning - if we even need it - might be better off
done as a special case for "page fault from kernel mode" once we've
dealt with any potential kernel oopses where the oops is the relevant
thing, not some artificial "scheduling while atomic" test.
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/lkml/20230820104303.2083444-1-mjguzik@gmail.com/
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update .gitignore to untrack tools directory and log.txt. "tools" is
generated in "selftests/net/Makefile" and log.txt is generated in
"selftests/net/gro.sh" when executing run_all_tests.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP sendmsg() is lockless, so ip_select_ident_segs()
can very well be run from multiple cpus [1]
Convert inet->inet_id to an atomic_t, but implement
a dedicated path for TCP, avoiding cost of a locked
instruction (atomic_add_return())
Note that this patch will cause a trivial merge conflict
because we added inet->flags in net-next tree.
v2: added missing change in
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
(David Ahern)
[1]
BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb
read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1:
ip_select_ident_segs include/net/ip.h:542 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0:
ip_select_ident_segs include/net/ip.h:541 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x184d -> 0x184e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
==================================================================
Fixes: 23f57406b8 ("ipv4: avoid using shared IP generator for connected sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes: e6f8f1a739 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a380 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie says:
====================
net: Fix return value check for fixed_phy_register()
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Changes in v3:
- Drop the error fix patch for fixed_phy_get_gpiod().
- Split the error code update code into another patch set as suggested.
- Update the commit title and message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: b0ba512e25 ("net: bcmgenet: enable driver to work without a device tree")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: c25b23b8a3 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are some small tty and serial core fixes for 6.5-rc7 that resolve a
lot of reported issues.
Primarily in here is the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of different
types of systems and serial ports. All of the reported issues with
duplicate names and other issues with this code are now resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZOEjmg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykpSgCfajOM7BUzL1kOrfKNvHQuPmOYlIUAnAot+4M+
HkvS58Xs2+PM14y/KG1j
=6DRj
-----END PGP SIGNATURE-----
Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.
Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
Since commit 91a7cda1f4 ("net: phy: Fix race condition on link status
change") all the phy_error() method invocations have been causing the
nested-mutex-lock deadlock because it's normally done in the PHY-driver
threaded IRQ handlers which since that change have been called with the
phydev->lock mutex held. Here is the calls thread:
IRQ: phy_interrupt()
+-> mutex_lock(&phydev->lock); <--------------------+
drv->handle_interrupt() | Deadlock due
+-> ERROR: phy_error() + to the nested
+-> phy_process_error() | mutex lock
+-> mutex_lock(&phydev->lock); <-+
phydev->state = PHY_ERROR;
mutex_unlock(&phydev->lock);
mutex_unlock(&phydev->lock);
The problem can be easily reproduced just by calling phy_error() from any
PHY-device threaded interrupt handler. Fix it by dropping the phydev->lock
mutex lock from the phy_process_error() method and printing a nasty error
message to the system log if the mutex isn't held in the caller execution
context.
Note for the fix to work correctly in the PHY-subsystem itself the
phydev->lock mutex locking must be added to the phy_error_precise()
function.
Link: https://lore.kernel.org/netdev/20230816180944.19262-1-fancer.lancer@gmail.com
Fixes: 91a7cda1f4 ("net: phy: Fix race condition on link status change")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC)
for active optical cables supporting 25G and 100G speeds.
Since the specification makes no statement about transmitter range, and
as the specific sfp module that had been tested features only 2m fiber -
short-range (SR) modes are selected.
The 100G speed is irrelevant because it would require multiple fibers /
multiple SFP28 modules combined under one netdev.
sfp-bus.c only handles a single module per netdev, so only 25Gbps modes
are selected.
sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR
with compatible properties, however that entry is a contradiction in
itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely
be a mode for qsfp modules only.
Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r
interface mode and 25000baseSR link mode.
Also enforce SFP28 bitrate limits on the values read from sfp eeprom as
requested by Russell King.
Tested with fs.com S28-AO02 AOC SFP28 module.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
unavailable for a while.
-----BEGIN PGP SIGNATURE-----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=mRg9
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Usual set of driver fixes. A bit more than usual because I was
unavailable for a while"
* tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
i2c: Update documentation to use .probe() again
i2c: sun6i-p2wi: Fix an error message in probe()
i2c: hisi: Only handle the interrupt of the driver's transfer
i2c: tegra: Fix i2c-tegra DMA config option processing
i2c: tegra: Fix failure during probe deferral cleanup
i2c: designware: Handle invalid SMBus block data response length value
i2c: designware: Correct length byte validation logic
i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
-----BEGIN PGP SIGNATURE-----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=eFDQ
-----END PGP SIGNATURE-----
Merge tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix infinite loop in readdir(), could happen in a big directory when
files get renamed during enumeration
- fix extent map handling of skipped pinned ranges
- fix a corner case when handling ordered extent length
- fix a potential crash when balance cancel races with pause
- verify correct uuid when starting scrub or device replace
* tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
btrfs: fix BUG_ON condition in btrfs_cancel_balance
btrfs: only subtract from len_to_oe_boundary when it is tracking an extent
btrfs: fix replace/scrub failure with metadata_uuid
btrfs: fix infinite directory reads
