The alignment for the IDMA size depends on the peripheral version, it
should then be configurable. Add stm32_idmabsize_align in the variant
structure.
And remove now unused (and wrong) MMCI_STM32_IDMABNDT_* macros.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20230619115120.64474-3-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For STM32MP25, we'll need to distinguish how is managed the delay block.
This is done through a new comptible dedicated for this SoC, as the
delay block registers are located in SYSCFG peripheral.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230619115120.64474-2-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It seems that Micron MTFC4GACAJCN-1M despite advertising TRIM support does
not work when the core is trying to use REQ_OP_WRITE_ZEROES.
We are seeing the following errors in OpenWrt under 6.1 on Qnap Qhora 301W
that we did not previously have and tracked it down to REQ_OP_WRITE_ZEROES:
[ 18.085950] I/O error, dev loop0, sector 596 op 0x9:(WRITE_ZEROES) flags 0x800 phys_seg 0 prio class 2
Disabling TRIM makes the error go away, so lets add a quirk for this eMMC
to disable TRIM.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230530213259.1776512-1-robimarko@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.4-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.5.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes returned by platform_get_irq_byname()
to -ENODEV, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating error
codes upstream.
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-13-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes: 2408a08583 ("mmc: sunxi-mmc: Handle return value of platform_get_irq")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230617203622.6812-12-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-11-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes: 682798a596 ("mmc: sdhci-spear: Handle return value of platform_get_irq")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230617203622.6812-10-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 1b7ba57ecc ("mmc: sdhci-acpi: Handle return value of platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230617203622.6812-9-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: ff65ffe46d ("mmc: Add Actions Semi Owl SoCs SD/MMC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-8-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-7-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-6-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-5-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 208489032b ("mmc: mediatek: Add Mediatek MMC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-4-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes: cbcaac6d7d ("mmc: meson-gx-mmc: Fix platform_get_irq's error checking")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230617203622.6812-3-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes: 660fc733bd ("mmc: bcm2835: Add new driver for the sdhost controller.")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-2-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc host drivers should have enabled the asynchronous probe option, but
it seems like we didn't set it for litex_mmc when introducing litex mmc
support, so let's set it now.
Tested with linux-on-litex-vexriscv on sipeed tang nano 20K fpga.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Fixes: 92e0991047 ("mmc: Add driver for LiteX's LiteSDCard interface")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230617085319.2139-1-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
These four lines clearing, masking and resetting the state
of the busy detect state machine is repeated five times in
the code so break this out to a small helper so things are
easier to read.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-9-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This makes the ux500 ->busy_complete() callback re-read
the status register 10 times while waiting for the busy
signal to assert in the status register.
If this does not happen, we bail out regarding the
command completed already, i.e. before we managed to
start to check the busy status.
There is a comment in the code about this, let's just
implement it to be certain that we can catch this glitch
if it happens.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-6-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This refactors the ->busy_complete() callback currently
only used by Ux500 and STM32 to handle busy detection on
hardware where one and the same IRQ is fired whether we get
a start or an end signal on busy detect.
The code is currently using the cached status from the
command IRQ in ->busy_status as a state to select what to
do next: if this state is non-zero we are waiting for
IRQs and if it is zero we treat the state as the starting
point for a busy detect wait cycle.
Make this explicit by creating a state machine where the
->busy_complete callback moves between three states.
The Ux500 busy detect code currently assumes this order:
we enable the busy detect IRQ, get a busy start IRQ, then a
busy end IRQ, and then we clear and mask this IRQ and
proceed.
We insert debug prints for unexpected states.
This works as before on most cards, however on a
problematic card that is not working with busy detect, and
which I have been debugging, the following happens a lot:
[ 3.380554] mmci-pl18x 80005000.mmc: no busy signalling in time
[ 3.387420] mmci-pl18x 80005000.mmc: no busy signalling in time
[ 3.394561] mmci-pl18x 80005000.mmc: lost busy status
when waiting for busy start IRQ
This probably means that the busy detect start IRQ has
already occurred when we start executing the
->busy_complete() callbacks, and the busy detect end IRQ
is counted as the start IRQ, and this is what is causing
the card to not be detected properly.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-5-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The busy detect callback for Ux500 checks for an error
in the status in the first if() clause. The only practical
reason is that if an error occurs, the if()-clause is not
executed, and the code falls through to the last
if()-clause if (host->busy_status) which will clear and
disable the irq. Make this explicit instead: it is easier
to read.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-4-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some interesting flags can arrive while we are waiting for
the first busy detect IRQ so OR then onto the stashed
flags so they are not missed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-3-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This does two things: firsr replace the hard-to-read long
if-expression:
if (!host->busy_status && !(status & err_msk) &&
(readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) {
With the more readable:
if (!host->busy_status && !(status & err_msk)) {
status = readl(base + MMCISTATUS);
if (status & host->variant->busy_detect_flag) {
Second notice that the re-read MMCISTATUS register is now
stored into the status variable, using logic OR because what
if something else changed too?
While we are at it, explain what the function is doing.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-2-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If we are starting a command which can generate a busy
response, then clear the variable host->busy_status
if the variant is using a ->busy_complete callback.
We are lucky that the member is zero by default and
hopefully always gets cleared in the ->busy_complete
callback even on errors, but it's just fragile so
make sure it is always initialized to zero.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405-pl180-busydetect-fix-v7-1-69a7164f2a61@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.4-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.5.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The feedback clock is used only for SDR104 & HS200 modes, and when
delay block is used (frequency is higher than 50 MHz). The tuning
procedure is then only required for those modes. Skip the procedure
for other modes.
The setting of this feedback clock is done just after enabling delay
block, and before configuring it.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20230613150148.429828-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The way that the timeout is currently calculated could lead to a u64
timeout value in mmci_start_command(). This value is then cast in a u32
register that leads to mmc erase failed issue with some SD cards.
Fixes: 8266c585f4 ("mmc: mmci: add hardware busy timeout feature")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230613134146.418016-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When using dm-verity with a data partition on an emmc device, dm-verity
races with the initialization of the (e)MMC/SD cards. This is because the
card detection procedure is being managed from a workqueue, rather than
synchronously from the mmc host's ->probe() routine.
To allow the card detect to be synchronous, let's simply skip using the
workqueue at the first initialization attempt from mmc_start_host().
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Link: https://lore.kernel.org/r/ZCTOMVjW+pnZVGsQ@snowbird
[Ulf: Re-wrote the commit message to clarify the change]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
All mmc host drivers should have the asynchronous probe option enabled, but
it seems like we failed to set it for mmci, so let's do that now.
Fixes: 21b2cec61c ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230612143730.210390-1-ulf.hansson@linaro.org
Merge the mmc fixes for v6.4-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.5.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
While SDHCI claims to support 64-bit DMA on MSM8916 it does not seem to
be properly functional. It is not immediately obvious because SDHCI is
usually used with IOMMU bypassed on this SoC, and all physical memory
has 32-bit addresses. But when trying to enable the IOMMU it quickly
fails with an error such as the following:
arm-smmu 1e00000.iommu: Unhandled context fault:
fsr=0x402, iova=0xfffff200, fsynr=0xe0000, cbfrsynra=0x140, cb=3
mmc1: ADMA error: 0x02000000
mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00002e02
mmc1: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000000
mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
mmc1: sdhci: Present: 0x03f80206 | Host ctl: 0x00000019
mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
mmc1: sdhci: Timeout: 0x0000000a | Int stat: 0x00000001
mmc1: sdhci: Int enab: 0x03ff900b | Sig enab: 0x03ff100b
mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
mmc1: sdhci: Caps: 0x322dc8b2 | Caps_1: 0x00008007
mmc1: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000
mmc1: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x5b590000
mmc1: sdhci: Resp[2]: 0xe6487f80 | Resp[3]: 0x0a404094
mmc1: sdhci: Host ctl2: 0x00000008
mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x0000000ffffff224
mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP -----------
mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg: 0x60006400 | DLL cfg2: 0x00000000
mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl: 0x00000000 | DDR cfg: 0x00000000
mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88018a8 Vndr func3: 0x00000000
mmc1: sdhci: ============================================
mmc1: sdhci: fffffffff200: DMA 0x0000ffffffffe100, LEN 0x0008, Attr=0x21
mmc1: sdhci: fffffffff20c: DMA 0x0000000000000000, LEN 0x0000, Attr=0x03
Looking closely it's obvious that only the 32-bit part of the address
(0xfffff200) arrives at the SMMU, the higher 16-bit (0xffff...) get
lost somewhere. This might not be a limitation of the SDHCI itself but
perhaps the bus/interconnect it is connected to, or even the connection
to the SMMU.
Work around this by setting SDHCI_QUIRK2_BROKEN_64_BIT_DMA to avoid
using 64-bit addresses.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230518-msm8916-64bit-v1-1-5694b0f35211@gerhold.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that there is a new dedicated ICE driver, drop the sdhci-msm ICE
implementation and use the new ICE api provided by the Qualcomm soc
driver ice. The platforms that already have ICE support will use the
API as library since there will not be a devicetree node, but instead
they have reg range. In this case, the of_qcom_ice_get will return an
ICE instance created for the consumer's device. But if there are
platforms that do not have ice reg in the consumer devicetree node
and instead provide a dedicated ICE devicetree node, theof_qcom_ice_get
will look up the device based on qcom,ice property and will get the ICE
instance registered by the probe function of the ice driver.
The ICE clock is now handle by the new driver. This is done by enabling
it on the creation of the ICE instance and then enabling/disabling it on
SDCC runtime resume/suspend.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230408214041.533749-4-abel.vesa@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the DT binding document for bcm2835-sdhost from .txt to YAML.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230604121223.9625-9-stefan.wahren@i2se.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support SD Express card for GL9767. The workflow of the
SD Express card in GL9767 is as below.
1. GL9767 operates in SD mode and set MMC_CAP2_SD_EXP flag.
2. If card is inserted, Host send CMD8 to ask the capabilities
of the card.
3. If the card has PCIe capability, then init_sd_express()
will be invoked.
4. If the card has been put in write protect state then the
SD features supported by SD mode but not supported by
PCIe mode, therefore GL9767 switch to SD mode.
5. If the card has not been put in write protect state then
GL9767 switch from SD mode to PCIe/NVMe mode and mmc driver
handover control to NVMe driver.
6. If card is removed, GL9767 will return to SD mode.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-5-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add new definition for VDD2 - UHS2 or PCIe/NVMe.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-4-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Set GL9767 SDR104's clock to 205MHz and enable SSC feature
depend on register 0x888 BIT(1).
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the GL9767 chipset. GL9767 supports
SD3 mode likes UHS-I SDR50, SDR104.
Enable MSI interrupt for GL9767. Some platform do not
support PCI INTx and devices can not work without
interrupt.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
CQHCI_SSC1 indicates to CQE the polling period to use when using periodic
SEND_QUEUE_STATUS(CMD13) polling.
Since MSDC CQE uses msdc_hclk as ITCFVAL, so driver should use hclk
frequency to get the actual time.
The default value 0x1000 that corresponds to 150us for MediaTek SoCs, let's
decrease it to 0x40 that corresponds to 2.35us, which can improve the
performance of some eMMC devices.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230609101355.5220-2-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SPI doesn't have the usual PROG path we can check for error bits
after moving back to TRAN. Instead it holds the line LOW until
completion. We can then check if the card shows any errors or
is in IDLE state, indicating the line is no longer LOW because
the card was reset.
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/55920f880c9742f486f64aa44e25508e@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Bayhub SD host has hardware limitation:
1.The upper 32bit address is inhibited to be written at SD Host Register
[03E][13]=0 (32bits addressing) mode, is admitted to be written only at
SD Host Register [03E][13]=1 (64bits addressing) mode.
2.Because of above item#1, need to configure SD Host Register [03E][13] to
1(64bits addressing mode) before set 64bit ADMA system address's higher
32bits SD Host Register [05F~05C] if 64 bits addressing mode is used.
The hardware limitation is reasonable for below reasons:
1.Normal flow should set DMA working mode first, then do
DMA-transfer-related configuration, such as system address.
2.The hardware limitation may avoid the software to configure wrong higher
32bit address at 32bits addressing mode although it is redundant.
The change that set 32bits/64bits addressing mode before set ADMA address,
has no side-effect to other host IPs for below reason:
The setting order is reasonable and standard: DMA Mode setting first and
then DMA address setting. It meets all DMA setting sequence.
Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230523111114.18124-1-chevron_li@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The error checks in mmc_blk_add_debugfs() and mmc_blk_remove_debugfs()
are extraneous. Therefore, this patch removes all error checks from
both functions.
Additionally, mmc_blk_add_debugfs() has been changed to return void
instead of an integer value that was never used. This simplifies the
function and improves its clarity.
Signed-off-by: Yeqi Fu <asuk4.q@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230518101216.369970-1-asuk4.q@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There are no other files referencing this function, apparently
it was left global to avoid an 'unused function' warning when
the only caller is left out. With a 'W=1' build, it causes
a 'missing prototype' warning though:
drivers/memstick/host/r592.c:47:13: error: no previous prototype for 'memstick_debug_get_tpc_name' [-Werror=missing-prototypes]
Annotate the function as 'static __maybe_unused' to avoid both
problems.
Fixes: 9263412501 ("memstick: add driver for Ricoh R5C592 card reader")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516202714.560929-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When I boot a kukui-kodama board, I see an ugly warning in my kernel
log:
mtk-msdc 11240000.mmc: error -ENXIO: IRQ sdio_wakeup not found
It's pretty normal not to have an "sdio_wakeup" IRQ defined. In fact,
no device trees in mainline seem to have it. Let's use the
platform_get_irq_byname_optional() to avoid the error message.
Fixes: 527f36f5ef ("mmc: mediatek: add support for SDIO eint wakup IRQ")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230510064434.1.I935404c5396e6bf952e99bb7ffb744c6f7fd430b@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Rather than casting mmc_free_host to an incompatible function type,
provide a trivial wrapper with the correct signature for the use-case.
Reported by clang-16 with W=1:
.../meson-mx-sdhc-mmc.c:791:38: error: cast from 'void (*)(struct mmc_host *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
ret = devm_add_action_or_reset(dev, (void(*)(void *))mmc_free_host,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/device.h:265:38: note: expanded from macro 'devm_add_action_or_reset'
__devm_add_action_or_reset(release, action, data, #action)
^~~~~~
The same approach is taken in litex_mmc.c with the function
litex_mmc_free_host_wrapper(). There may be scope for consolidation.
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230510-mmc-sdhci-msm-function-cast-v1-1-5ae634b24fbd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If the device is not read-only, then we will be printing an empty
whitespace before the newline, fix that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230509194455.1791890-1-f.fainelli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
