Since the function has been simplified and only call iommu_init_ga_log(),
remove the function and replace with iommu_init_ga_log() instead.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20210820202957.187572-4-suravee.suthikulpanit@amd.com
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, iommu_init_ga() checks and disables IOMMU VAPIC support
(i.e. AMD AVIC support in IOMMU) when GAMSup feature bit is not set.
However it forgets to clear IRQ_POSTING_CAP from the previously set
amd_iommu_irq_ops.capability.
This triggers an invalid page fault bug during guest VM warm reboot
if AVIC is enabled since the irq_remapping_cap(IRQ_POSTING_CAP) is
incorrectly set, and crash the system with the following kernel trace.
BUG: unable to handle page fault for address: 0000000000400dd8
RIP: 0010:amd_iommu_deactivate_guest_mode+0x19/0xbc
Call Trace:
svm_set_pi_irte_mode+0x8a/0xc0 [kvm_amd]
? kvm_make_all_cpus_request_except+0x50/0x70 [kvm]
kvm_request_apicv_update+0x10c/0x150 [kvm]
svm_toggle_avic_for_irq_window+0x52/0x90 [kvm_amd]
svm_enable_irq_window+0x26/0xa0 [kvm_amd]
vcpu_enter_guest+0xbbe/0x1560 [kvm]
? avic_vcpu_load+0xd5/0x120 [kvm_amd]
? kvm_arch_vcpu_load+0x76/0x240 [kvm]
? svm_get_segment_base+0xa/0x10 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x103/0x590 [kvm]
kvm_vcpu_ioctl+0x22a/0x5d0 [kvm]
__x64_sys_ioctl+0x84/0xc0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes by moving the initializing of AMD IOMMU interrupt remapping mode
(amd_iommu_guest_ir) earlier before setting up the
amd_iommu_irq_ops.capability with appropriate IRQ_POSTING_CAP flag.
[joro: Squashed the two patches and limited
check_features_on_all_iommus() to CONFIG_IRQ_REMAP
to fix a compile warning.]
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20210820202957.187572-2-suravee.suthikulpanit@amd.com
Link: https://lore.kernel.org/r/20210820202957.187572-3-suravee.suthikulpanit@amd.com
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove the new use of the variable introduced in the AMD driver branch.
The variable was removed already in the iommu core branch, causing build
errors when the brances are merged.
Cc: Nadav Amit <namit@vmware.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210802150643.3634-1-joro@8bytes.org
When running on an AMD vIOMMU, it is better to avoid TLB flushes
of unmodified PTEs. vIOMMUs require the hypervisor to synchronize the
virtualized IOMMU's PTEs with the physical ones. This process induce
overheads.
AMD IOMMU allows us to flush any range that is aligned to the power of
2. So when running on top of a vIOMMU, break the range into sub-ranges
that are naturally aligned, and flush each one separately. This apporach
is better when running with a vIOMMU, but on physical IOMMUs, the
penalty of IOTLB misses due to unnecessary flushed entries is likely to
be low.
Repurpose (i.e., keeping the name, changing the logic)
domain_flush_pages() so it is used to choose whether to perform one
flush of the whole range or multiple ones to avoid flushing unnecessary
ranges. Use NpCache, as usual, to infer whether the IOMMU is physical or
virtual.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-8-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On virtual machines, software must flush the IOTLB after each page table
entry update.
The iommu_map_sg() code iterates through the given scatter-gather list
and invokes iommu_map() for each element in the scatter-gather list,
which calls into the vendor IOMMU driver through iommu_ops callback. As
the result, a single sg mapping may lead to multiple IOTLB flushes.
Fix this by adding amd_iotlb_sync_map() callback and flushing at this
point after all sg mappings we set.
This commit is followed and inspired by commit 933fcd01e9
("iommu/vt-d: Add iotlb_sync_map callback").
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-7-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD's IOMMU can flush efficiently (i.e., in a single flush) any range.
This is in contrast, for instnace, to Intel IOMMUs that have a limit on
the number of pages that can be flushed in a single flush. In addition,
AMD's IOMMU do not care about the page-size, so changes of the page size
do not need to trigger a TLB flush.
So in most cases, a TLB flush due to disjoint range is not needed for
AMD. Yet, vIOMMUs require the hypervisor to synchronize the virtualized
IOMMU's PTEs with the physical ones. This process induce overheads, so
it is better not to cause unnecessary flushes, i.e., flushes of PTEs
that were not modified.
Implement and use amd_iommu_iotlb_gather_add_page() and use it instead
of the generic iommu_iotlb_gather_add_page(). Ignore disjoint regions
unless "non-present cache" feature is reported by the IOMMU
capabilities, as this is an indication we are running on a physical
IOMMU. A similar indication is used by VT-d (see "caching mode"). The
new logic retains the same flushing behavior that we had before the
introduction of page-selective IOTLB flushes for AMD.
On virtualized environments, check if the newly flushed region and the
gathered one are disjoint and flush if it is.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-6-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Do not use flush-queue on virtualized environments, where the NpCache
capability of the IOMMU is set. This is required to reduce
virtualization overheads.
This change follows a similar change to Intel's VT-d and a detailed
explanation as for the rationale is described in commit 29b3283972
("iommu/vt-d: Do not use flush-queue when caching-mode is on").
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-3-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Recent patch attempted to enable selective page flushes on AMD IOMMU but
neglected to adapt amd_iommu_iotlb_sync() to use the selective flushes.
Adapt amd_iommu_iotlb_sync() to use selective flushes and change
amd_iommu_unmap() to collect the flushes. As a defensive measure, to
avoid potential issues as those that the Intel IOMMU driver encountered
recently, flush the page-walk caches by always setting the "pde"
parameter. This can be removed later.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-2-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For the printing of RMP_HW_ERROR / RMP_PAGE_FAULT / IO_PAGE_FAULT
events, the AMD IOMMU code uses such logic:
if (pdev)
dev_data = dev_iommu_priv_get(&pdev->dev);
if (dev_data && __ratelimit(&dev_data->rs)) {
pci_err(pdev, ...
} else {
printk_ratelimit() / pr_err{,_ratelimited}(...
}
This means that if we receive an event for a PCI devid which actually
does have a struct pci_dev and an attached struct iommu_dev_data, but
rate limiting kicks in, we'll fall back to the non-PCI branch of the
test, and print the event in a different format.
Fix this by changing the logic to:
if (dev_data) {
if (__ratelimit(&dev_data->rs)) {
pci_err(pdev, ...
}
} else {
pr_err_ratelimited(...
}
Suggested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/YPgk1dD1gPMhJXgY@wantstofly.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1626683578-64214-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If people are going to insist on calling iommu_iova_to_phys()
pointlessly and expecting it to work, we can at least do ourselves a
favour by handling those cases in the core code, rather than repeatedly
across an inconsistent handful of drivers.
Since all the existing drivers implement the internal callback, and any
future ones are likely to want to work with iommu-dma which relies on
iova_to_phys a fair bit, we may as well remove that currently-redundant
check as well and consider it mandatory.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/f564f3f6ff731b898ff7a898919bf871c2c7745a.1626354264.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We only ever now set strict mode enabled in iommu_set_dma_strict(), so
just remove the argument.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-7-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make IOMMU_DEFAULT_LAZY default for when AMD_IOMMU config is set, which
matches current behaviour.
For "fullflush" param, just call iommu_set_dma_strict(true) directly.
Since we get a strict vs lazy mode print already in iommu_subsys_init(),
and maintain a deprecation print when "fullflush" param is passed, drop the
prints in amd_iommu_init_dma_ops().
Finally drop global flag amd_iommu_unmap_flush, as it has no longer has any
purpose.
[jpg: Rebase for relocated file and drop amd_iommu_unmap_flush]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1626088340-5838-6-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the x86 drivers support iommu.strict, deprecate the custom
methods.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-2-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Passing a 64-bit address width to iommu_setup_dma_ops() is valid on
virtual platforms, but isn't currently possible. The overflow check in
iommu_dma_init_domain() prevents this even when @dma_base isn't 0. Pass
a limit address instead of a size, so callers don't have to fake a size
to work around the check.
The base and limit parameters are being phased out, because:
* they are redundant for x86 callers. dma-iommu already reserves the
first page, and the upper limit is already in domain->geometry.
* they can now be obtained from dev->dma_range_map on Arm.
But removing them on Arm isn't completely straightforward so is left for
future work. As an intermediate step, simplify the x86 callers by
passing dummy limits.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A recent commit introduced this section mismatch warning:
WARNING: modpost: vmlinux.o(.text.unlikely+0x22a1f): Section mismatch in reference from the function detect_ivrs() to the variable .init.data:amd_iommu_force_enable
The reason is that detect_ivrs() is not marked __init while it should
be, because it is only called from another __init function. Mark
detect_ivrs() __init to get rid of the warning.
Fixes: b1e650db2c ("iommu/amd: Add amd_iommu=force_enable option")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210608122843.8413-1-joro@8bytes.org
Now that DMA ops are part of the core API via iommu-dma, fold the
vestigial remains of the IOMMU_DMA_OPS init state into the IOMMU API
phase, and clean up a few other leftovers. This should also close the
race window wherein bus_set_iommu() effectively makes the DMA ops state
visible before its nominal initialisation - it seems this was previously
fairly benign, but since commit a250c23f15 ("iommu: remove
DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE") it can now lead to the strict flush
queue policy inadvertently being picked for default domains allocated
during that window, with a corresponding unexpected perfomance impact.
Reported-by: Jussi Maki <joamaki@gmail.com>
Tested-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Fixes: a250c23f15 ("iommu: remove DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE")
Link: https://lore.kernel.org/r/665db61e23ff8d54ac5eb391bef520b3a803fcb9.1622727974.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add this option to enable the IOMMU on platforms like AMD Stoney,
where the kernel usually disables it because it may cause problems in
some scenarios.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210603130203.29016-1-joro@8bytes.org
print_iommu_info prints the EFR register and then the decoded list of
features on a separate line:
pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
The second line is emitted via 'pr_cont', which causes it to have a
different ('warn') loglevel compared to the previous line ('info').
Commit 9a295ff0ff attempted to rectify this by removing the newline
from the pci_info format string, but this doesn't work, as pci_info
calls implicitly append a newline anyway.
Printing the decoded features on the same line would make it quite long.
Instead, change pci_info() to pr_info() to omit PCI bus location info,
which is also shown in the preceding message. This results in:
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
Fixes: 9a295ff0ff ("iommu/amd: Print extended features in one line to fix divergent log levels")
Link: https://lore.kernel.org/lkml/alpine.LNX.2.20.13.2104112326460.11104@monopod.intra.ispras.ru
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20210504102220.1793-1-amonakov@ispras.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The logic to determine the mask of page-specific invalidations was
tested in userspace. As the code was copied into the kernel, the
parentheses were mistakenly set in the wrong place, resulting in the
wrong mask.
Fix it.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Fixes: 268aa45482 ("iommu/amd: Page-specific invalidations for more than one page")
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210502070001.1559127-2-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 08a27c1c3e ("iommu: Add support to change default domain
of an iommu group") a user can switch a device between IOMMU and direct
DMA through sysfs. This doesn't work for AMD IOMMU at the moment because
dev->dma_ops is not cleared when switching from a DMA to an identity
IOMMU domain. The DMA layer thus attempts to use the dma-iommu ops on an
identity domain, causing an oops:
# echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/unbind
# echo identity > /sys/bus/pci/devices/0000:00:05.0/iommu_group/type
# echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/bind
...
BUG: kernel NULL pointer dereference, address: 0000000000000028
...
Call Trace:
iommu_dma_alloc
e1000e_setup_tx_resources
e1000e_open
Since iommu_change_dev_def_domain() calls probe_finalize() again, clear
the dma_ops there like Vt-d does.
Fixes: 08a27c1c3e ("iommu: Add support to change default domain of an iommu group")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210422094216.2282097-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rather than have separate opaque setter functions that are easy to
overlook and lead to repetitive boilerplate in drivers, let's pass the
relevant initialisation parameters directly to iommu_device_register().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In early AMD desktop/mobile platforms (during 2013), when the IOMMU
Performance Counter (PMC) support was first introduced in
commit 30861ddc9c ("perf/x86/amd: Add IOMMU Performance Counter
resource management"), there was a HW bug where the counters could not
be accessed. The result was reading of the counter always return zero.
At the time, the suggested workaround was to add a test logic prior
to initializing the PMC feature to check if the counters can be programmed
and read back the same value. This has been working fine until the more
recent desktop/mobile platforms start enabling power gating for the PMC,
which prevents access to the counters. This results in the PMC support
being disabled unnecesarily.
Unfortunatly, there is no documentation of since which generation
of hardware the original PMC HW bug was fixed. Although, it was fixed
soon after the first introduction of the PMC. Base on this, we assume
that the buggy platforms are less likely to be in used, and it should
be relatively safe to remove this legacy logic.
Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <ml.linux@elloe.vision>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: David Coe <david.coe@live.co.uk>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210409085848.3908-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit 6778ff5b21.
The original commit tries to address an issue, where PMC power-gating
causing the IOMMU PMC pre-init test to fail on certain desktop/mobile
platforms where the power-gating is normally enabled.
There have been several reports that the workaround still does not
guarantee to work, and can add up to 100 ms (on the worst case)
to the boot process on certain platforms such as the MSI B350M MORTAR
with AMD Ryzen 3 2200G.
Therefore, revert this commit as a prelude to removing the pre-init
test.
Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <ml.linux@elloe.vision>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: David Coe <david.coe@live.co.uk>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20210409085848.3908-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
'devid' has been checked in function check_device, no need to double
check and clean up this.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1617939040-35579-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, IOMMU invalidations and device-IOTLB invalidations using
AMD IOMMU fall back to full address-space invalidation if more than a
single page need to be flushed.
Full flushes are especially inefficient when the IOMMU is virtualized by
a hypervisor, since it requires the hypervisor to synchronize the entire
address-space.
AMD IOMMUs allow to provide a mask to perform page-specific
invalidations for multiple pages that match the address. The mask is
encoded as part of the address, and the first zero bit in the address
(in bits [51:12]) indicates the mask size.
Use this hardware feature to perform selective IOMMU and IOTLB flushes.
Combine the logic between both for better code reuse.
The IOMMU invalidations passed a smoke-test. The device IOTLB
invalidations are untested.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210323210619.513069-1-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A few functions that were intentended for the perf events support are
currently declared in arch/x86/events/amd/iommu.h, which mens they are
not in scope for the actual function definition. Also amdkfd has started
using a few of them using externs in a .c file. End that misery by
moving the prototypes to the proper header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove exports for functions that are only used in the AMD IOMMU driver
itself, or the also always builtin perf events support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead make the global iommu_dma_strict paramete in iommu.c canonical by
exporting helpers to get and set it and use those directly in the drivers.
This make sure that the iommu.strict parameter also works for the AMD and
Intel IOMMU drivers on x86. As those default to lazy flushing a new
IOMMU_CMD_LINE_STRICT is used to turn the value into a tristate to
represent the default if not overriden by an explicit parameter.
[ported on top of the other iommu_attr changes and added a few small
missing bits]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-19-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
increase_address_space() calls get_zeroed_page(gfp) under spin_lock with
disabled interrupts. gfp flags passed to increase_address_space() may allow
sleeping, so it comes to this:
BUG: sleeping function called from invalid context at mm/page_alloc.c:4342
in_atomic(): 1, irqs_disabled(): 1, pid: 21555, name: epdcbbf1qnhbsd8
Call Trace:
dump_stack+0x66/0x8b
___might_sleep+0xec/0x110
__alloc_pages_nodemask+0x104/0x300
get_zeroed_page+0x15/0x40
iommu_map_page+0xdd/0x3e0
amd_iommu_map+0x50/0x70
iommu_map+0x106/0x220
vfio_iommu_type1_ioctl+0x76e/0x950 [vfio_iommu_type1]
do_vfs_ioctl+0xa3/0x6f0
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4e/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by moving get_zeroed_page() out of spin_lock/unlock section.
Fixes: 754265bcab ("iommu/amd: Fix race in increase_address_space()")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210217143004.19165-1-arbn@yandex-team.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Certain AMD platforms enable power gating feature for IOMMU PMC,
which prevents the IOMMU driver from updating the counter while
trying to validate the PMC functionality in the init_iommu_perf_ctr().
This results in disabling PMC support and the following error message:
"AMD-Vi: Unable to read/write to IOMMU perf counter"
To workaround this issue, disable power gating temporarily by programming
the counter source to non-zero value while validating the counter,
and restore the prior state afterward.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Tj (Elloe Linux) <ml.linux@elloe.vision>
Link: https://lore.kernel.org/r/20210208122712.5048-1-suravee.suthikulpanit@amd.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These implement map and unmap for AMD IOMMU v1 pagetable, which
will be used by the IO pagetable framework.
Also clean up unused extern function declarations.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201215073705.123786-13-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
