bhash2 added a new member sk_bind2_node in struct sock to link
sockets to bhash2 in addition to bhash.
bhash is still needed to search conflicting sockets efficiently
from a port for the wildcard address. However, bhash itself need
not have sockets.
If we link each bhash2 bucket to the corresponding bhash bucket,
we can iterate the same set of the sockets from bhash2 via bhash.
This patch links bhash2 to bhash only, and the actual use will be
in the later patches. Finally, we will remove sk_bind2_node.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Later, we no longer link sockets to bhash. Instead, each bhash2
bucket is linked to the corresponding bhash bucket.
Then, we pass the bhash bucket to bhash2 allocation functions as
tb. However, tb is already used in inet_bind2_bucket_create() and
inet_bind2_bucket_init() as the bhash2 bucket.
To make the following diff clear, let's use tb2 for the bhash2 bucket
there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet_bind2_bucket_addr_match() and inet_bind2_bucket_match_addr_any()
are called for each bhash2 bucket to check conflicts. Thus, we call
ipv6_addr_any() and ipv6_addr_v4mapped() over and over during bind().
Let's avoid calling them by saving the address type in inet_bind2_bucket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In bhash2, IPv4/IPv6 addresses are saved in two union members,
which complicate address checks in inet_bind2_bucket_addr_match()
and inet_bind2_bucket_match_addr_any() considering uninitialised
memory and v4-mapped-v6 conflicts.
Let's simplify that by saving IPv4 address as v4-mapped-v6 address
and defining tb2.rcv_saddr as tb2.v6_rcv_saddr.s6_addr32[3].
Then, we can compare v6 address as is, and after checking v4-mapped-v6,
we can compare v4 address easily. Also, we can remove tb2->family.
Note these functions will be further refactored in the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The protocol family tests in inet_bind2_bucket_addr_match() and
inet_bind2_bucket_match_addr_any() are ordered as follows.
if (sk->sk_family != tb2->family)
else if (sk->sk_family == AF_INET6)
else
This patch rearranges them so that AF_INET6 socket is handled first
to make the following patch tidy, where tb2->family will be removed.
if (sk->sk_family == AF_INET6)
else if (tb2->family == AF_INET6)
else
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While checking port availability in bind() or listen(), we used only
bhash for all v4-mapped-v6 addresses. But there is no good reason not
to use bhash2 for v4-mapped-v6 non-wildcard addresses.
Let's do it by returning true in inet_use_bhash2_on_bind(). Then, we
also need to add a test in inet_bind2_bucket_match_addr_any() so that
::ffff:X.X.X.X will match with 0.0.0.0.
Note that sk->sk_rcv_saddr is initialised for v4-mapped-v6 sk in
__inet6_bind().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmWAz2EACgkQ6rmadz2v
bToqrw/9EwroZCc8GEHOKAlb/fzrMvn92rLo0ZW/cGN84QJPnx4zM6Zo0+fgLaaN
oqqztwMUwdzGC3uX3FfVXaaLKbJ/MeHeL9BXFZNW8zkRHciw4R7kIBhOdPnHyET7
uT+rQ4xPe1Mt7e9PjepKlSL5mEsxWfBkdUgsdn19Z2Vjdfr9mZMhYWYMJGcfTCD1
TwxHKBPhq5fN3IsshmMBB8IrRp1HStUKb65MgZ4dI22LJXxTsFkx5XMFXcmuqvkH
NhKj8jDcPEEh31bYcb6aG2Z4onw5F2lquygjk1Qyy5cyw45m/ipJKAXKdAyvJG+R
VZCWOET/9wbRwFSK5wxwihCuKghFiofK52i2PcGtXZh0PCouyZZneSJOKM0yVWKO
BvuJBxK4ETRnQyN6ZxhuJiEXG3/YMBBhyR2TX1LntVK9ct/k7qFVzATG49J39/sR
SYMbptBRj4a5oMJ1qn0nFVEDFkg0jTnTDNnsEpcz60Ayt6EsJ1XosO5yz2huf861
xgRMTKMseyG1/uV45tQ8ZPzbSPpBxjUi9Dl3coYsIm1a+y6clWUXcarONY5KVrpS
CR98DuFgl+E7dXuisd/Kz2p2KxxSPq8nytsmLlgOvrUqhwiXqB+TKN8EHgIapVOt
l1A5LrzXFTcGlT9MlaWBqEIy83Bu1nqQqbxrAFOE0k8A5jomXaw=
=stU2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 1580ab63fc ("tcp/dccp: better use of ephemeral ports in connect()")
we added an heuristic to select even ports for connect() and odd ports for bind().
This was nice because no applications changes were needed.
But it added more costs when all even ports are in use,
when there are few listeners and many active connections.
Since then, IP_LOCAL_PORT_RANGE has been added to permit an application
to partition ephemeral port range at will.
This patch extends the idea so that if IP_LOCAL_PORT_RANGE is set on
a socket before accept(), port selection no longer favors even ports.
This means that connect() can find a suitable source port faster,
and applications can use a different split between connect() and bind()
users.
This should give more entropy to Toeplitz hash used in RSS: Using even
ports was wasting one bit from the 16bit sport.
A similar change can be done in inet_csk_find_open_port() if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20231214192939.1962891-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change inet_sk_get_local_port_range() to return a boolean,
telling the callers if the port range was provided by
IP_LOCAL_PORT_RANGE socket option.
Adds documentation while we are at it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231214192939.1962891-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BPF struct_ops uses __arch_prepare_bpf_trampoline() to write
trampolines for indirect function calls. These tramplines much have
matching CFI.
In order to obtain the correct CFI hash for the various methods, add a
matching structure that contains stub functions, the compiler will
generate correct CFI which we can pilfer for the trampolines.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231215092707.566977112@infradead.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
optmem_max being used in tx zerocopy,
we want to be able to control it on a netns basis.
Following patch changes two tests.
Tested:
oqq130:~# cat /proc/sys/net/core/optmem_max
131072
oqq130:~# echo 1000000 >/proc/sys/net/core/optmem_max
oqq130:~# cat /proc/sys/net/core/optmem_max
1000000
oqq130:~# unshare -n
oqq130:~# cat /proc/sys/net/core/optmem_max
131072
oqq130:~# exit
logout
oqq130:~# cat /proc/sys/net/core/optmem_max
1000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support IP_PKTINFO on those packets, we need to call
ipv4_pktinfo_prepare.
When sending mrouted/pimd daemons a cache report IGMP msg, it is
unnecessary to set dst on the newly created skb.
It used to be necessary on older versions until
commit d826eb14ec ("ipv4: PKTINFO doesnt need dst reference") which
changed the way IP_PKTINFO struct is been retrieved.
Changes from v1:
1. Undo changes in ipv4_pktinfo_prepare function. use it directly
and copy the control block.
Fixes: d826eb14ec ("ipv4: PKTINFO doesnt need dst reference")
Signed-off-by: Leone Fernando <leone4fernando@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For some reason sctp_poll() generates EPOLLERR if sk->sk_error_queue
is not empty but recvmsg() can not drain the error queue yet.
This is needed to better support timestamping.
I had to export inet_recv_error(), since sctp
can be compiled as a module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20231212145550.3872051-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on the tcp man page, if TCP_NODELAY is set, it disables Nagle's algorithm
and packets are sent as soon as possible. However in the `tcp_push` function
where autocorking is evaluated the `nonagle` value set by TCP_NODELAY is not
considered which can trigger unexpected corking of packets and induce delays.
For example, if two packets are generated as part of a server's reply, if the
first one is not transmitted on the wire quickly enough, the second packet can
trigger the autocorking in `tcp_push` and be delayed instead of sent as soon as
possible. It will either wait for additional packets to be coalesced or an ACK
from the client before transmitting the corked packet. This can interact badly
if the receiver has tcp delayed acks enabled, introducing 40ms extra delay in
completion times. It is not always possible to control who has delayed acks
set, but it is possible to adjust when and how autocorking is triggered.
Patch prevents autocorking if the TCP_NODELAY flag is set on the socket.
Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and
Apache Tomcat 9.0.83 running the basic servlet below:
import java.io.IOException;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class HelloWorldServlet extends HttpServlet {
@Override
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=utf-8");
OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8");
String s = "a".repeat(3096);
osw.write(s,0,s.length());
osw.flush();
}
}
Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS
c6i.8xlarge instance. With the current auto-corking behavior and TCP_NODELAY
set an additional 40ms latency from P99.99+ values are observed. With the
patch applied we see no occurrences of 40ms latencies. The patch has also been
tested with iperf and uperf benchmarks and no regression was observed.
# No patch with tcp_autocorking=1 and TCP_NODELAY set on all sockets
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello'
...
50.000% 0.91ms
75.000% 1.12ms
90.000% 1.46ms
99.000% 1.73ms
99.900% 1.96ms
99.990% 43.62ms <<< 40+ ms extra latency
99.999% 48.32ms
100.000% 49.34ms
# With patch
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello'
...
50.000% 0.89ms
75.000% 1.13ms
90.000% 1.44ms
99.000% 1.67ms
99.900% 1.78ms
99.990% 2.27ms <<< no 40+ ms extra latency
99.999% 3.71ms
100.000% 4.57ms
Fixes: f54b311142 ("tcp: auto corking")
Signed-off-by: Salvatore Dipietro <dipiets@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzkaller report:
kernel BUG at net/core/skbuff.c:3452!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135
RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452)
Call Trace:
icmp_glue_bits (net/ipv4/icmp.c:357)
__ip_append_data.isra.0 (net/ipv4/ip_output.c:1165)
ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341)
icmp_push_reply (net/ipv4/icmp.c:370)
__icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772)
ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295)
ip_output (net/ipv4/ip_output.c:427)
__ip_queue_xmit (net/ipv4/ip_output.c:535)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
__tcp_retransmit_skb (net/ipv4/tcp_output.c:3387)
tcp_retransmit_skb (net/ipv4/tcp_output.c:3404)
tcp_retransmit_timer (net/ipv4/tcp_timer.c:604)
tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716)
The panic issue was trigered by tcp simultaneous initiation.
The initiation process is as follows:
TCP A TCP B
1. CLOSED CLOSED
2. SYN-SENT --> <SEQ=100><CTL=SYN> ...
3. SYN-RECEIVED <-- <SEQ=300><CTL=SYN> <-- SYN-SENT
4. ... <SEQ=100><CTL=SYN> --> SYN-RECEIVED
5. SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ...
// TCP B: not send challenge ack for ack limit or packet loss
// TCP A: close
tcp_close
tcp_send_fin
if (!tskb && tcp_under_memory_pressure(sk))
tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet
TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN; // set FIN flag
6. FIN_WAIT_1 --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ...
// TCP B: send challenge ack to SYN_FIN_ACK
7. ... <SEQ=301><ACK=101><CTL=ACK> <-- SYN-RECEIVED //challenge ack
// TCP A: <SND.UNA=101>
8. FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic
__tcp_retransmit_skb //skb->len=0
tcp_trim_head
len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100
__pskb_trim_head
skb->data_len -= len // skb->len=-1, wrap around
... ...
ip_fragment
icmp_glue_bits //BUG_ON
If we use tcp_trim_head() to remove acked SYN from packet that contains data
or other flags, skb->len will be incorrectly decremented. We can remove SYN
flag that has been acked from rtx_queue earlier than tcp_trim_head(), which
can fix the problem mentioned above.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 939463016b ("tcp: change data receiver flowlabel after one dup")
we noticed an increase of TCPACKSkippedPAWS events.
Neal Cardwell tracked the issue to tcp_disordered_ack() assumption
about remote peer TS clock.
RFC 1323 & 7323 are suggesting the following:
"timestamp clock frequency in the range 1 ms to 1 sec per tick
between 1ms and 1sec."
This has to be adjusted for 1 MHz clock frequency.
This hints at reorders of SACK packets on send side,
this might deserve a future patch.
(skb->ooo_okay is always set for pure ACK packets)
Fixes: 614e8316aa ("tcp: add support for usec resolution in TCP TS values")
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Morley <morleyd@google.com>
Link: https://lore.kernel.org/r/20231207181342.525181-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 227b60f510 added a seqlock to ensure that the low and high
port numbers were always updated together.
This is overkill because the two 16bit port numbers can be held in
a u32 and read/written in a single instruction.
More recently 91d0b78c51 added support for finer per-socket limits.
The user-supplied value is 'high << 16 | low' but they are held
separately and the socket options protected by the socket lock.
Use a u32 containing 'high << 16 | low' for both the 'net' and 'sk'
fields and use READ_ONCE()/WRITE_ONCE() to ensure both values are
always updated together.
Change (the now trival) inet_get_local_port_range() to a static inline
to optimise the calling code.
(In particular avoiding returning integers by reference.)
Signed-off-by: David Laight <david.laight@aculab.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/4e505d4198e946a8be03fb1b4c3072b0@AcuMS.aculab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is based on a detailed report and ideas from Yepeng Pan
and Christian Rossow.
ACK seq validation is currently following RFC 5961 5.2 guidelines:
The ACK value is considered acceptable only if
it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
SND.NXT). All incoming segments whose ACK value doesn't satisfy the
above condition MUST be discarded and an ACK sent back. It needs to
be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a
duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK
acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an
ACK, drop the segment, and return". The "ignored" above implies that
the processing of the incoming data segment continues, which means
the ACK value is treated as acceptable. This mitigation makes the
ACK check more stringent since any ACK < SND.UNA wouldn't be
accepted, instead only ACKs that are in the range ((SND.UNA -
MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through.
This can be refined for new (and possibly spoofed) flows,
by not accepting ACK for bytes that were never sent.
This greatly improves TCP security at a little cost.
I added a Fixes: tag to make sure this patch will reach stable trees,
even if the 'blamed' patch was adhering to the RFC.
tp->bytes_acked was added in linux-4.2
Following packetdrill test (courtesy of Yepeng Pan) shows
the issue at hand:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1024) = 0
// ---------------- Handshake ------------------- //
// when window scale is set to 14 the window size can be extended to
// 65535 * (2^14) = 1073725440. Linux would accept an ACK packet
// with ack number in (Server_ISN+1-1073725440. Server_ISN+1)
// ,though this ack number acknowledges some data never
// sent by the server.
+0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14>
+0 > S. 0:0(0) ack 1 <...>
+0 < . 1:1(0) ack 1 win 65535
+0 accept(3, ..., ...) = 4
// For the established connection, we send an ACK packet,
// the ack packet uses ack number 1 - 1073725300 + 2^32,
// where 2^32 is used to wrap around.
// Note: we used 1073725300 instead of 1073725440 to avoid possible
// edge cases.
// 1 - 1073725300 + 2^32 = 3221241997
// Oops, old kernels happily accept this packet.
+0 < . 1:1001(1000) ack 3221241997 win 65535
// After the kernel fix the following will be replaced by a challenge ACK,
// and prior malicious frame would be dropped.
+0 > . 1:1(0) ack 1001
Fixes: 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yepeng Pan <yepeng.pan@cispa.de>
Reported-by: Christian Rossow <rossow@cispa.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of performing unconditional system-wide bpf_capable() and
perfmon_capable() calls inside bpf_base_func_proto() function (and other
similar ones) to determine eligibility of a given BPF helper for a given
program, use previously recorded BPF token during BPF_PROG_LOAD command
handling to inform the decision.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This extra check doesn't work for a handshake when SYN segment has
(current_key.maclen != rnext_key.maclen). It could be amended to
preserve rnext_key.maclen instead of current_key.maclen, but that
requires a lookup on listen socket.
Originally, this extra maclen check was introduced just because it was
cheap. Drop it and convert tcp_request_sock::maclen into boolean
tcp_request_sock::used_tcp_ao.
Fixes: 06b22ef295 ("net/tcp: Wire TCP-AO to request sockets")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the connection was established, don't allow adding TCP-AO keys that
don't match the peer. Currently, there are checks for ip-address
matching, but L3 index check is missing. Add it to restrict userspace
shooting itself somewhere.
Yet, nothing restricts the CAP_NET_RAW user from trying to shoot
themselves by performing setsockopt(SO_BINDTODEVICE) or
setsockopt(SO_BINDTOIFINDEX) over an established TCP-AO connection.
So, this is just "minimum effort" to potentially save someone's
debugging time, rather than a full restriction on doing weird things.
Fixes: 248411b8cb ("net/tcp: Wire up l3index to TCP-AO")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Listen socket is not an established TCP connection, so
setsockopt(TCP_AO_REPAIR) doesn't have any impact.
Restrict this uAPI for listen sockets.
Fixes: faadfaba5e ("net/tcp: Add TCP_AO_REPAIR")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently functions that pre-calculate TCP header options length use
unaligned TCP-AO header + MAC-length for skb reservation.
And the functions that actually write TCP-AO options into skb do align
the header. Nothing good can come out of this for ((maclen % 4) != 0).
Provide tcp_ao_len_aligned() helper and use it everywhere for TCP
header options space calculations.
Fixes: 1e03d32bea ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns
true. For example, applications can use PF_PACKET to create a malformed
packet with no IP header. This type of packet causes a problem such as
uninit-value access.
This patch ensures that skb_pull() can pull the required size by checking
the skb with pskb_network_may_pull() before skb_pull().
Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The variables are organized according in the following way:
- TX read-mostly hotpath cache lines
- TXRX read-mostly hotpath cache lines
- RX read-mostly hotpath cache lines
- TX read-write hotpath cache line
- TXRX read-write hotpath cache line
- RX read-write hotpath cache line
Fastpath cachelines end after rcvq_space.
Cache line boundaries are enforced only between read-mostly and
read-write. That is, if read-mostly tx cachelines bleed into
read-mostly txrx cachelines, we do not care. We care about the
boundaries between read and write cachelines because we want
to prevent false sharing.
Fast path variables span cache lines before change: 12
Fast path variables span cache lines after change: 8
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231204201232.520025-3-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.
Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.
To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.
When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.
Fixes: 3aa7857fe1 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the removal of the 'iov' argument to import_single_range(), the two
functions are now fully identical. Convert the import_single_range()
callers to import_ubuf(), and remove the former fully.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20231204174827.1258875-3-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
Walk the hashinfo->bhash2 table so that inet_diag can dump TCP sockets
that are bound but haven't yet called connect() or listen().
The code is inspired by the ->lhash2 loop. However there's no manual
test of the source port, since this kind of filtering is already
handled by inet_diag_bc_sk(). Also, a maximum of 16 sockets are dumped
at a time, to avoid running with bh disabled for too long.
There's no TCP state for bound but otherwise inactive sockets. Such
sockets normally map to TCP_CLOSE. However, "ss -l", which is supposed
to only dump listening sockets, actually requests the kernel to dump
sockets in either the TCP_LISTEN or TCP_CLOSE states. To avoid dumping
bound-only sockets with "ss -l", we therefore need to define a new
pseudo-state (TCP_BOUND_INACTIVE) that user space will be able to set
explicitly.
With an IPv4, an IPv6 and an IPv6-only socket, bound respectively to
40000, 64000, 60000, an updated version of iproute2 could work as
follow:
$ ss -t state bound-inactive
Recv-Q Send-Q Local Address:Port Peer Address:Port Process
0 0 0.0.0.0:40000 0.0.0.0:*
0 0 [::]:60000 [::]:*
0 0 *:64000 *:*
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/b3a84ae61e19c06806eea9c602b3b66e8f0cfc81.1701362867.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use DO_ONCE_LITE_IF() and __cold attribute to put tcp_gro_dev_warn()
out of line.
This also allows the message to be printed again after a
"echo 1 > /sys/kernel/debug/clear_warn_once"
Also add a READ_ONCE() when reading device mtu, as it could
be changed concurrently.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231130184135.4130860-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will support arbitrary SYN Cookie with BPF, and then kfunc at
TC will preallocate reqsk and initialise some fields that should
not be overwritten later by cookie_v[46]_check().
To simplify the flow in cookie_v[46]_check(), we move such fields'
initialisation to cookie_tcp_reqsk_alloc() and factorise non-BPF
SYN Cookie handling into cookie_tcp_check(), where we validate the
cookie and allocate reqsk, as done by kfunc later.
Note that we set ireq->ecn_ok in two steps, the latter of which will
be shared by the BPF case. As cookie_ecn_ok() is one-liner, now
it's inlined.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will support arbitrary SYN Cookie with BPF, and then some reqsk fields
are initialised in kfunc, and others are done in cookie_v[46]_check().
This patch factorises the common part as cookie_tcp_reqsk_init() and
calls it in cookie_tcp_reqsk_alloc() to minimise the discrepancy between
cookie_v[46]_check().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We initialise treq->af_specific in cookie_tcp_reqsk_alloc() so that
we can look up a key later in tcp_create_openreq_child().
Initially, that change was added for MD5 by commit ba5a4fdd63 ("tcp:
make sure treq->af_specific is initialized"), but it has not been used
since commit d0f2b7a9ca ("tcp: Disable header prediction for MD5
flow.").
Now, treq->af_specific is used only by TCP-AO, so, we can move that
initialisation into tcp_ao_syncookie().
In addition to that, l3index in cookie_v[46]_check() is only used for
tcp_ao_syncookie(), so let's move it as well.
While at it, we move down tcp_ao_syncookie() in cookie_v4_check() so
that it will be called after security_inet_conn_request() to make
functions order consistent with cookie_v6_check().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we create a full socket from SYN Cookie, we initialise
tcp_sk(sk)->tsoffset redundantly in tcp_get_cookie_sock() as
the field is inherited from tcp_rsk(req)->ts_off.
cookie_v[46]_check
|- treq->ts_off = 0
`- tcp_get_cookie_sock
|- tcp_v[46]_syn_recv_sock
| `- tcp_create_openreq_child
| `- newtp->tsoffset = treq->ts_off
`- tcp_sk(child)->tsoffset = tsoff
Let's initialise tcp_rsk(req)->ts_off with the correct offset
and remove the second initialisation of tcp_sk(sk)->tsoffset.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_hdr(skb) and SYN Cookie are passed to __cookie_v[46]_check(), but
none of the callers passes cookie other than ntohl(th->ack_seq) - 1.
Let's fetch it in __cookie_v[46]_check() instead of passing the cookie
over and over.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will support arbitrary SYN Cookie with BPF, and then reqsk
will be preallocated before cookie_v[46]_check().
Depending on how validation fails, we send RST or just drop skb.
To make the error handling easier, let's clean up goto labels.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock_net(sk) is used repeatedly in cookie_v[46]_check().
Let's cache it in a variable.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will grow and cut the xmas tree in cookie_v[46]_check().
This patch cleans it up to make later patches tidy.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all the sock diag modules in one fell swoop.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, non fatal ICMP messages received on behalf
of SYN_SENT sockets do call tcp_ld_RTO_revert()
to implement RFC 6069, but immediately call tcp_done(),
thus aborting the connect() attempt.
This violates RFC 1122 following requirement:
4.2.3.9 ICMP Messages
...
o Destination Unreachable -- codes 0, 1, 5
Since these Unreachable messages indicate soft error
conditions, TCP MUST NOT abort the connection, and it
SHOULD make the information available to the
application.
This patch makes sure non 'fatal' ICMP[v6] messages do not
abort the connection attempt.
It enables RFC 6069 for SYN_SENT sockets as a result.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Morley <morleyd@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
David used icsk->icsk_backoff field to track the number of linear timeouts.
Since then, tp->total_rto has been added.
This commit uses tp->total_rto instead of icsk->icsk_backoff
so that tcp_ld_RTO_revert() no longer can trigger an overflow
in inet_csk_rto_backoff(). Other than the potential UBSAN
report, there was no issue because receiving an ICMP message
currently aborts the connect().
In the following patch, we want to adhere to RFC 6069
and RFC 1122 4.2.3.9.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Morley <morleyd@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've started to see the following kernel traces:
WARNING: CPU: 83 PID: 0 at net/core/filter.c:6641 sk_lookup+0x1bd/0x1d0
Call Trace:
<IRQ>
__bpf_skc_lookup+0x10d/0x120
bpf_sk_lookup+0x48/0xd0
bpf_sk_lookup_tcp+0x19/0x20
bpf_prog_<redacted>+0x37c/0x16a3
cls_bpf_classify+0x205/0x2e0
tcf_classify+0x92/0x160
__netif_receive_skb_core+0xe52/0xf10
__netif_receive_skb_list_core+0x96/0x2b0
napi_complete_done+0x7b5/0xb70
<redacted>_poll+0x94/0xb0
net_rx_action+0x163/0x1d70
__do_softirq+0xdc/0x32e
asm_call_irq_on_stack+0x12/0x20
</IRQ>
do_softirq_own_stack+0x36/0x50
do_softirq+0x44/0x70
__inet_hash can race with lockless (rcu) readers on the other cpus:
__inet_hash
__sk_nulls_add_node_rcu
<- (bpf triggers here)
sock_set_flag(SOCK_RCU_FREE)
Let's move the SOCK_RCU_FREE part up a bit, before we are inserting
the socket into hashtables. Note, that the race is really harmless;
the bpf callers are handling this situation (where listener socket
doesn't have SOCK_RCU_FREE set) correctly, so the only
annoyance is a WARN_ONCE.
More details from Eric regarding SOCK_RCU_FREE timeline:
Commit 3b24d854cb ("tcp/dccp: do not touch listener sk_refcnt under
synflood") added SOCK_RCU_FREE. At that time, the precise location of
sock_set_flag(sk, SOCK_RCU_FREE) did not matter, because the thread calling
__inet_hash() owns a reference on sk. SOCK_RCU_FREE was only tested
at dismantle time.
Commit 6acc9b432e ("bpf: Add helper to retrieve socket in BPF")
started checking SOCK_RCU_FREE _after_ the lookup to infer whether
the refcount has been taken care of.
Fixes: 6acc9b432e ("bpf: Add helper to retrieve socket in BPF")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp: fix usec timestamps with TCP fastopen
- tcp_sigpool: fix some off by one bugs
- tcp: fix possible out-of-bounds reads in tcp_hash_fail()
- tcp: fix SYN option room calculation for TCP-AO
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=k6Wk
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
-----BEGIN PGP SIGNATURE-----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=8Kr3
-----END PGP SIGNATURE-----
Merge tag 'nf-23-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Add missing netfilter modules description to fix W=1, from Florian Westphal.
2) Fix catch-all element GC with timeout when use with the pipapo set
backend, this remained broken since I tried to fix it this summer,
then another attempt to fix it recently.
3) Add missing IPVS modules descriptions to fix W=1, also from Florian.
4) xt_recent allocated a too small buffer to store an IPv4-mapped IPv6
address which can be parsed by in6_pton(), from Maciej Zenczykowski.
Broken for many releases.
5) Skip IPv4-mapped IPv6, IPv4-compat IPv6, site/link local scoped IPv6
addressses to set up IPv6 NAT redirect, also from Florian. This is
broken since 2012.
* tag 'nf-23-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
====================
Link: https://lore.kernel.org/r/20231108155802.84617-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZUsiDAAKCRDbK58LschI
g9xXAQCaFjj55sXDpr1qKG2D3PMSDURx7SzmpzIay/A/dqVDPgEAlgU6XsMW6w6S
poMN8KniDLtBgj6nIKfJEAgIXeIYTAs=
=qXjW
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-11-08
We've added 16 non-merge commits during the last 6 day(s) which contain
a total of 30 files changed, 341 insertions(+), 130 deletions(-).
The main changes are:
1) Fix a BPF verifier issue in precision tracking for BPF_ALU | BPF_TO_BE |
BPF_END where the source register was incorrectly marked as precise,
from Shung-Hsi Yu.
2) Fix a concurrency issue in bpf_timer where the former could still have
been alive after an application releases or unpins the map, from Hou Tao.
3) Fix a BPF verifier issue where immediates are incorrectly cast to u32
before being spilled and therefore losing sign information, from Hao Sun.
4) Fix a misplaced BPF_TRACE_ITER in check_css_task_iter_allowlist which
incorrectly compared bpf_prog_type with bpf_attach_type, from Chuyi Zhou.
5) Add __bpf_hook_{start,end} as well as __bpf_kfunc_{start,end}_defs macros,
migrate all BPF-related __diag callsites over to it, and add a new
__diag_ignore_all for -Wmissing-declarations to the macros to address
recent build warnings, from Dave Marchevsky.
6) Fix broken BPF selftest build of xdp_hw_metadata test on architectures
where char is not signed, from Björn Töpel.
7) Fix test_maps selftest to properly use LIBBPF_OPTS() macro to initialize
the bpf_map_create_opts, from Andrii Nakryiko.
8) Fix bpffs selftest to avoid unmounting /sys/kernel/debug as it may have
been mounted and used by other applications already, from Manu Bretelle.
9) Fix a build issue without CONFIG_CGROUPS wrt css_task open-coded
iterators, from Matthieu Baerts.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
selftests/bpf: Fix broken build where char is unsigned
selftests/bpf: precision tracking test for BPF_NEG and BPF_END
bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
selftests/bpf: Add test for using css_task iter in sleepable progs
selftests/bpf: Add tests for css_task iter combining with cgroup iter
bpf: Relax allowlist for css_task iter
selftests/bpf: fix test_maps' use of bpf_map_create_opts
bpf: Check map->usercnt after timer->timer is assigned
bpf: Add __bpf_hook_{start,end} macros
bpf: Add __bpf_kfunc_{start,end}_defs macros
selftests/bpf: fix test_bpffs
selftests/bpf: Add test for immediate spilled to stack
bpf: Fix check_stack_write_fixed_off() to correctly spill imm
bpf: fix compilation error without CGROUPS
====================
Link: https://lore.kernel.org/r/20231108132448.1970-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clang warns (or errors with CONFIG_WERROR=y) when CONFIG_TCP_AO is set:
net/ipv4/tcp_output.c:663:2: error: label at end of compound statement is a C23 extension [-Werror,-Wc23-extensions]
663 | }
| ^
1 error generated.
On earlier releases (such as clang-11, the current minimum supported
version for building the kernel) that do not support C23, this was a
hard error unconditionally:
net/ipv4/tcp_output.c:663:2: error: expected statement
}
^
1 error generated.
While adding a semicolon after the label would resolve this, it is more
in line with the kernel as a whole to refactor this block into a
standalone function, which means the goto a label construct can just be
replaced with a return statement. Do so to resolve the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1953
Fixes: 1e03d32bea ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building SYN packet in tcp_syn_options(), MSS, TS, WS, and
SACKPERM are used without checking the remaining bytes in the
options area.
To keep that logic as is, we limit the TCP-AO MAC length in
tcp_ao_parse_crypto(). Currently, the limit is calculated as below.
MAX_TCP_OPTION_SPACE - TCPOLEN_TSTAMP_ALIGNED
- TCPOLEN_WSCALE_ALIGNED
- TCPOLEN_SACKPERM_ALIGNED
This looks confusing as (1) we pack SACKPERM into the leading
2-bytes of the aligned 12-bytes of TS and (2) TCPOLEN_MSS_ALIGNED
is not used. Fortunately, the calculated limit is not wrong as
TCPOLEN_SACKPERM_ALIGNED and TCPOLEN_MSS_ALIGNED are the same value.
However, we should use the proper constant in the formula.
MAX_TCP_OPTION_SPACE - TCPOLEN_MSS_ALIGNED
- TCPOLEN_TSTAMP_ALIGNED
- TCPOLEN_WSCALE_ALIGNED
Fixes: 4954f17dde ("net/tcp: Introduce TCP_AO setsockopt()s")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After blamed commit, TFO client-ack-dropped-then-recovery-ms-timestamps
packetdrill test failed.
David Morley and Neal Cardwell started investigating and Neal pointed
that we had :
tcp_conn_request()
tcp_try_fastopen()
-> tcp_fastopen_create_child
-> child = inet_csk(sk)->icsk_af_ops->syn_recv_sock()
-> tcp_create_openreq_child()
-> copy req_usec_ts from req:
newtp->tcp_usec_ts = treq->req_usec_ts;
// now the new TFO server socket always does usec TS, no matter
// what the route options are...
send_synack()
-> tcp_make_synack()
// disable tcp_rsk(req)->req_usec_ts if route option is not present:
if (tcp_rsk(req)->req_usec_ts < 0)
tcp_rsk(req)->req_usec_ts = dst_tcp_usec_ts(dst);
tcp_conn_request() has the initial dst, we can initialize
tcp_rsk(req)->req_usec_ts there instead of later in send_synack();
This means tcp_rsk(req)->req_usec_ts can be a boolean.
Many thanks to David an Neal for their help.
Fixes: 614e8316aa ("tcp: add support for usec resolution in TCP TS values")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202310302216.f79d78bc-oliver.sang@intel.com
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Morley <morleyd@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
API:
- Add virtual-address based lskcipher interface.
- Optimise ahash/shash performance in light of costly indirect calls.
- Remove ahash alignmask attribute.
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc.
- Remove some uses of obsolete algorithms (md4, md5, sha1).
- Add FIPS 202 SHA-3 support in pkcs1pad.
- Add fast path for single-page messages in adiantum.
- Remove zlib-deflate.
Drivers:
- Add support for S4 in meson RNG driver.
- Add STM32MP13x support in stm32.
- Add hwrng interface support in qcom-rng.
- Add support for deflate algorithm in hisilicon/zip.
-----BEGIN PGP SIGNATURE-----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=IZmR
-----END PGP SIGNATURE-----
Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
BPF kfuncs are meant to be called from BPF programs. Accordingly, most
kfuncs are not called from anywhere in the kernel, which the
-Wmissing-prototypes warning is unhappy about. We've peppered
__diag_ignore_all("-Wmissing-prototypes", ... everywhere kfuncs are
defined in the codebase to suppress this warning.
This patch adds two macros meant to bound one or many kfunc definitions.
All existing kfunc definitions which use these __diag calls to suppress
-Wmissing-prototypes are migrated to use the newly-introduced macros.
A new __diag_ignore_all - for "-Wmissing-declarations" - is added to the
__bpf_kfunc_start_defs macro based on feedback from Andrii on an earlier
version of this patch [0] and another recent mailing list thread [1].
In the future we might need to ignore different warnings or do other
kfunc-specific things. This change will make it easier to make such
modifications for all kfunc defs.
[0]: https://lore.kernel.org/bpf/CAEf4BzaE5dRWtK6RPLnjTW-MW9sx9K3Fn6uwqCTChK2Dcb1Xig@mail.gmail.com/
[1]: https://lore.kernel.org/bpf/ZT+2qCc%2FaXep0%2FLf@krava/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The "cpool_populated" variable is the number of elements in the cpool[]
array that have been populated. It is incremented in
tcp_sigpool_alloc_ahash() every time we populate a new element.
Unpopulated elements are NULL but if we have populated every element then
this code will read one element beyond the end of the array.
Fixes: 8c73b26315 ("net/tcp: Prepare tcp_md5sig_pool for TCP-AO")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/ce915d61-04bc-44fb-b450-35fcc9fc8831@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
linux-next hit the following build error:
net/ipv4/tcp_ao.c: In function 'tcp_ao_key_alloc':
net/ipv4/tcp_ao.c:1536:13: error: implicit declaration of function 'crypto_ahash_alignmask'; did you mean 'crypto_ahash_alg_name'? [-Werror=implicit-function-declaration]
1536 | if (crypto_ahash_alignmask(tfm) > TCP_AO_KEY_ALIGN) {
| ^~~~~~~~~~~~~~~~~~~~~~
| crypto_ahash_alg_name
Caused by commit from the crypto tree
0f8660c82b ("crypto: ahash - remove crypto_ahash_alignmask")
interacting with commit
4954f17dde ("net/tcp: Introduce TCP_AO setsockopt()s")
from networking. crypto_ahash_alignmask() has been phased out
by the former commit, drop the call in networking.
Eric confirms that the check is safe to remove and was questionable
here in the first place.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=slHB
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2023-10-28
1) Remove unused function declarations of xfrm4_extract_input and
xfrm6_extract_input. From Yue Haibing.
2) Annotate struct xfrm_sec_ctx with __counted_by.
From Kees Cook.
3) Support GRO decapsulation for ESP in UDP encapsulation.
From Antony Antony et all.
4) Replace the xfrm session decode with flow dissector.
From Florian Westphal.
5) Fix a use after free in __xfrm6_udp_encap_rcv.
6) Fix the layer 4 flowi decoding.
From Florian Westphal.
* tag 'ipsec-next-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: fix layer 4 flowi decoding
xfrm Fix use after free in __xfrm6_udp_encap_rcv.
xfrm: policy: replace session decode with flow dissector
xfrm: move mark and oif flowi decode into common code
xfrm: pass struct net to xfrm_decode_session wrappers
xfrm: Support GRO for IPv6 ESP in UDP encapsulation
xfrm: Support GRO for IPv4 ESP in UDP encapsulation
xfrm: Use the XFRM_GRO to indicate a GRO call on input
xfrm: Annotate struct xfrm_sec_ctx with __counted_by
xfrm: Remove unused function declarations
====================
Link: https://lore.kernel.org/r/20231028084328.3119236-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the alignmask for ahash and shash algorithms is always 0,
crypto_ahash_alignmask() always returns 0 and will be removed. In
preparation for this, stop checking crypto_ahash_alignmask() in ah4.c.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Per section 4.c. of the IETF Trust Legal Provisions, "Code Components"
in IETF Documents are licensed on the terms of the BSD-3-Clause license:
https://trustee.ietf.org/documents/trust-legal-provisions/tlp-5/
The term "Code Components" specifically includes ASN.1 modules:
https://trustee.ietf.org/documents/trust-legal-provisions/code-components-list-3/
Add an SPDX identifier as well as a copyright notice pursuant to section
6.d. of the Trust Legal Provisions to all ASN.1 modules in the tree
which are derived from IETF Documents.
Section 4.d. of the Trust Legal Provisions requests that each Code
Component identify the RFC from which it is taken, so link that RFC
in every ASN.1 module.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add TCP_AO_REPAIR setsockopt(), getsockopt(). They let a user to repair
TCP-AO ISNs/SNEs. Also let the user hack around when (tp->repair) is on
and add ao_info on a socket in any supported state.
As SNEs now can be read/written at any moment, use
WRITE_ONCE()/READ_ONCE() to set/read them.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5,
TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified
by L3 ifinndex. Similarly, without this flag the key will work in
the default VRF l3index = 0 for connections.
To prevent AO-keys from overlapping, it's restricted to add key B for a
socket that has key A, which have the same sndid/rcvid and one of
the following is true:
- !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX)
so that any key is non-bound to a VRF
- A.l3index == B.l3index
both want to work for the same VRF
Additionally, it's restricted to match TCP-MD5 keys for the same peer
the following way:
|--------------|--------------------|----------------|---------------|
| | MD5 key without | MD5 key | MD5 key |
| | l3index | l3index=0 | l3index=N |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| without | reject | reject | reject |
| l3index | | | |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| l3index=0 | reject | reject | allow |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| l3index=N | reject | allow | reject |
|--------------|--------------------|----------------|---------------|
This is done with the help of tcp_md5_do_lookup_any_l3index() to reject
adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF.
This is important for case where sysctl_tcp_l3mdev_accept = 1
Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with
l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to TCP-MD5, add a static key to TCP-AO that is patched out
when there are no keys on a machine and dynamically enabled with the
first setsockopt(TCP_AO) adds a key on any socket. The static key is as
well dynamically disabled later when the socket is destructed.
The lifetime of enabled static key here is the same as ao_info: it is
enabled on allocation, passed over from full socket to twsk and
destructed when ao_info is scheduled for destruction.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Delete becomes very, very fast - almost free, but after setsockopt()
syscall returns, the key is still alive until next RCU grace period.
Which is fine for listen sockets as userspace needs to be aware of
setsockopt(TCP_AO) and accept() race and resolve it with verification
by getsockopt() after TCP connection was accepted.
The benchmark results (on non-loaded box, worse with more RCU work pending):
> ok 33 Worst case delete 16384 keys: min=5ms max=10ms mean=6.93904ms stddev=0.263421
> ok 34 Add a new key 16384 keys: min=1ms max=4ms mean=2.17751ms stddev=0.147564
> ok 35 Remove random-search 16384 keys: min=5ms max=10ms mean=6.50243ms stddev=0.254999
> ok 36 Remove async 16384 keys: min=0ms max=0ms mean=0.0296107ms stddev=0.0172078
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce getsockopt(TCP_AO_GET_KEYS) that lets a user get TCP-AO keys
and their properties from a socket. The user can provide a filter
to match the specific key to be dumped or ::get_all = 1 may be
used to dump all keys in one syscall.
Add another getsockopt(TCP_AO_INFO) for providing per-socket/per-ao_info
stats: packet counters, Current_key/RNext_key and flags like
::ao_required and ::accept_icmps.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide setsockopt() key flag that makes TCP-AO exclude hashing TCP
header for peers that match the key. This is needed for interraction
with middleboxes that may change TCP options, see RFC5925 (9.2).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to IPsec, RFC5925 prescribes:
">> A TCP-AO implementation MUST default to ignore incoming ICMPv4
messages of Type 3 (destination unreachable), Codes 2-4 (protocol
unreachable, port unreachable, and fragmentation needed -- ’hard
errors’), and ICMPv6 Type 1 (destination unreachable), Code 1
(administratively prohibited) and Code 4 (port unreachable) intended
for connections in synchronized states (ESTABLISHED, FIN-WAIT-1, FIN-
WAIT-2, CLOSE-WAIT, CLOSING, LAST-ACK, TIME-WAIT) that match MKTs."
A selftest (later in patch series) verifies that this attack is not
possible in this TCP-AO implementation.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper for logging connection-detailed messages for failed TCP
hash verification (both MD5 and AO).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Sequence Number Extension (SNE) for TCP-AO.
This is needed to protect long-living TCP-AO connections from replaying
attacks after sequence number roll-over, see RFC5925 (6.2).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce segment counters that are useful for troubleshooting/debugging
as well as for writing tests.
Now there are global snmp counters as well as per-socket and per-key.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now there is a common function to verify signature on TCP segments:
tcp_inbound_hash(). It has checks for all possible cross-interactions
with MD5 signs as well as with unsigned segments.
The rules from RFC5925 are:
(1) Any TCP segment can have at max only one signature.
(2) TCP connections can't switch between using TCP-MD5 and TCP-AO.
(3) TCP-AO connections can't stop using AO, as well as unsigned
connections can't suddenly start using AO.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to RST segments, wire SYN-ACKs to TCP-AO.
tcp_rsk_used_ao() is handy here to check if the request socket used AO
and needs a signature on the outgoing segments.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when the new request socket is created from the listening socket,
it's recorded what MKT was used by the peer. tcp_rsk_used_ao() is
a new helper for checking if TCP-AO option was used to create the
request socket.
tcp_ao_copy_all_matching() will copy all keys that match the peer on the
request socket, as well as preparing them for the usage (creating
traffic keys).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for sockets in time-wait state.
ao_info as well as all keys are inherited on transition to time-wait
socket. The lifetime of ao_info is now protected by ref counter, so
that tcp_ao_destroy_sock() will destruct it only when the last user is
gone.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wire up sending resets to TCP-AO hashing.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a helper that:
(1) shares the common code with TCP-MD5 header options parsing
(2) looks for hash signature only once for both TCP-MD5 and TCP-AO
(3) fails with -EEXIST if any TCP sign option is present twice, see
RFC5925 (2.2):
">> A single TCP segment MUST NOT have more than one TCP-AO in its
options sequence. When multiple TCP-AOs appear, TCP MUST discard
the segment."
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using precalculated traffic keys, sign TCP segments as prescribed by
RFC5925. Per RFC, TCP header options are included in sign calculation:
"The TCP header, by default including options, and where the TCP
checksum and TCP-AO MAC fields are set to zero, all in network-
byte order." (5.1.3)
tcp_ao_hash_header() has exclude_options parameter to optionally exclude
TCP header from hash calculation, as described in RFC5925 (9.1), this is
needed for interaction with middleboxes that may change "some TCP
options". This is wired up to AO key flags and setsockopt() later.
Similarly to TCP-MD5 hash TCP segment fragments.
From this moment a user can start sending TCP-AO signed segments with
one of crypto ahash algorithms from supported by Linux kernel. It can
have a user-specified MAC length, to either save TCP option header space
or provide higher protection using a longer signature.
The inbound segments are not yet verified, TCP-AO option is ignored and
they are accepted.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add traffic key calculation the way it's described in RFC5926.
Wire it up to tcp_finish_connect() and cache the new keys straight away
on already established TCP connections.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be as conservative as possible: if there is TCP-MD5 key for a given peer
regardless of L3 interface - don't allow setting TCP-AO key for the same
peer. According to RFC5925, TCP-AO is supposed to replace TCP-MD5 and
there can't be any switch between both on any connected tuple.
Later it can be relaxed, if there's a use, but in the beginning restrict
any intersection.
Note: it's still should be possible to set both TCP-MD5 and TCP-AO keys
on a listening socket for *different* peers.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 3 setsockopt()s:
1. TCP_AO_ADD_KEY to add a new Master Key Tuple (MKT) on a socket
2. TCP_AO_DEL_KEY to delete present MKT from a socket
3. TCP_AO_INFO to change flags, Current_key/RNext_key on a TCP-AO sk
Userspace has to introduce keys on every socket it wants to use TCP-AO
option on, similarly to TCP_MD5SIG/TCP_MD5SIG_EXT.
RFC5925 prohibits definition of MKTs that would match the same peer,
so do sanity checks on the data provided by userspace. Be as
conservative as possible, including refusal of defining MKT on
an established connection with no AO, removing the key in-use and etc.
(1) and (2) are to be used by userspace key manager to add/remove keys.
(3) main purpose is to set RNext_key, which (as prescribed by RFC5925)
is the KeyID that will be requested in TCP-AO header from the peer to
sign their segments with.
At this moment the life of ao_info ends in tcp_v4_destroy_sock().
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce new kernel config option and common structures as well as
helpers to be used by TCP-AO code.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path,
which is setsockopt() and use crypto ahash requests on fast paths,
which are RX/TX softirqs. Also, it needs a temporary/scratch buffer
for preparing the hash.
Rework tcp_md5sig_pool in order to support other hashing algorithms
than MD5. It will make it possible to share pre-allocated crypto_ahash
descriptors and scratch area between all TCP hash users.
Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated
crypto ahash tfm. Kudos to Herbert, who provided this new crypto API.
I was a little concerned over GFP_ATOMIC allocations of ahash and
crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both
"backends" with different algorithms, using patched version of iperf3[2].
On my laptop with i7-7600U @ 2.80GHz:
clone-tfm per-CPU-requests
TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec
TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec
TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec
TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec
TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec
TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec
TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec
TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec
TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec
So, it seems that my concerns don't have strong grounds and per-CPU
crypto_request allocation can be dropped/removed from tcp_sigpool once
ciphers get crypto_clone_ahash() support.
[1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u
[2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
RTAX_FEATURE_ALLFRAG was added before the first git commit:
https://www.mail-archive.com/bk-commits-head@vger.kernel.org/msg03399.html
The feature would send packets to the fragmentation path if a box
receives a PMTU value with less than 1280 byte. However, since commit
9d289715eb ("ipv6: stop sending PTB packets for MTU < 1280"), such
message would be simply discarded. The feature flag is neither supported
in iproute2 utility. In theory one can still manipulate it with direct
netlink message, but it is not ideal because it was based on obsoleted
guidance of RFC-2460 (replaced by RFC-8200).
The feature would always test false at the moment, so remove related
code or mark them as unused.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/d78e44dcd9968a252143ffe78460446476a472a1.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the ability to report in tcp_info.tcpi_options if
a flow is using usec resolution in TCP TS val.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back in 2015, Van Jacobson suggested to use usec resolution in TCP TS values.
This has been implemented in our private kernels.
Goals were :
1) better observability of delays in networking stacks.
2) better disambiguation of events based on TSval/ecr values.
3) building block for congestion control modules needing usec resolution.
Back then we implemented a schem based on private SYN options
to negotiate the feature.
For upstream submission, we chose to use a route attribute,
because this feature is probably going to be used in private
networks [1] [2].
ip route add 10/8 ... features tcp_usec_ts
Note that RFC 7323 recommends a
"timestamp clock frequency in the range 1 ms to 1 sec per tick.",
but also mentions
"the maximum acceptable clock frequency is one tick every 59 ns."
[1] Unfortunately RFC 7323 5.5 (Outdated Timestamps) suggests
to invalidate TS.Recent values after a flow was idle for more
than 24 days. This is the part making usec_ts a problem
for peers following this recommendation for long living
idle flows.
[2] Attempts to standardize usec ts went nowhere:
https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdfhttps://datatracker.ietf.org/doc/draft-wang-tcpm-low-latency-opt/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before adding usec TS support, add tcp_rtt_tsopt_us() helper
to factorize code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helper returns a TSval from a TCP socket.
It currently calls tcp_time_stamp_ms() but will soon
be able to return a usec based TSval, depending
on an upcoming tp->tcp_usec_ts field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_ns_to_ts() is only used once from cookie_init_timestamp().
Also add the 'bool usec_ts' parameter to enable usec TS later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helper returns a 32bit TCP TSval from skb->tstamp.
As we are going to support usec or ms units soon, rename it
to tcp_skb_timestamp_ts() and add a boolean to select the unit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of usec TCP TS support, remove tcp_time_stamp_raw()
in favor of tcp_clock_ts() helper. This helper will return a suitable
32bit result to feed TS values, depending on a socket field.
Also add tcp_tw_tsval() and tcp_rsk_tsval() helpers to factorize
the details.
We do not yet support usec timestamps.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It delivers current TCP time stamp in ms unit, and is used
in place of confusing tcp_time_stamp_raw()
It is the same family than tcp_clock_ns() and tcp_clock_ms().
tcp_time_stamp_raw() will be replaced later for TSval
contexts with a more descriptive name.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of adding usec TCP TS values, add tcp_time_stamp_ms()
for contexts needing ms based values.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cookie_init_timestamp() is supposed to return a 64bit timestamp
suitable for both TSval determination and setting of skb->tstamp.
Unfortunately it uses 32bit fields and overflows after
2^32 * 10^6 nsec (~49 days) of uptime.
Generated TSval are still correct, but skb->tstamp might be set
far away in the past, potentially confusing other layers.
tcp_ns_to_ts() is changed to return a full 64bit value,
ts and ts_now variables are changed to u64 type,
and TSMASK is removed in favor of shifts operations.
While we are at it, change this sequence:
ts >>= TSBITS;
ts--;
ts <<= TSBITS;
ts |= options;
to:
ts -= (1UL << TSBITS);
Fixes: 9a568de481 ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A recent patch changed xfrm6_udp_encap_rcv to not
free the skb itself anymore but fogot the case
where xfrm4_udp_encap_rcv is called subsequently.
Fix this by moving the call to xfrm4_udp_encap_rcv
from __xfrm6_udp_encap_rcv to xfrm6_udp_encap_rcv.
Fixes: 221ddb723d ("xfrm: Support GRO for IPv6 ESP in UDP encapsulation")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This commit fix wrong RTO timeout when received SACK reneging.
When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.
But since the commit 62d9f1a694 ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.
Here is a packetdrill script to check this bug:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// simulate srtt to 100ms
+0 < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0 write(4, ..., 10000) = 10000
+0 > P. 1:10001(10000) ack 1
// inject sack
+.1 < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0 > . 1:1001(1000) ack 1
// inject sack reneging
+.1 < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>
// we expect rto fired in 1/2*srtt (50ms)
+.05 > . 1001:2001(1000) ack 1
This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.
Fixes: 62d9f1a694 ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN")
Signed-off-by: Fred Chen <fred.chenchen03@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Under memory stress conditions, tcp_sendmsg_locked()
might call sk_stream_wait_memory(), thus releasing the socket lock.
If a fresh skb has been allocated prior to this,
we should not leave it in the write queue otherwise
tcp_write_xmit() could panic.
This apparently does not happen often, but a future change
in __sk_mem_raise_allocated() that Shakeel and others are
considering would increase chances of being hurt.
Under discussion is to remove this controversial part:
/* Fail only if socket is _under_ its sndbuf.
* In this case we cannot block, so that we have to fail.
*/
if (sk->sk_wmem_queued + size >= sk->sk_sndbuf) {
/* Force charge with __GFP_NOFAIL */
if (memcg_charge && !charged) {
mem_cgroup_charge_skmem(sk->sk_memcg, amt,
gfp_memcg_charge() | __GFP_NOFAIL);
}
return 1;
}
Fixes: fdfc5c8594 ("tcp: remove empty skb from write queue in error cases")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20231019112457.1190114-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reproduce environment:
network with 3 VM linuxs is connected as below:
VM1<---->VM2(latest kernel 6.5.0-rc7)<---->VM3
VM1: eth0 ip: 192.168.122.207 MTU 1500
VM2: eth0 ip: 192.168.122.208, eth1 ip: 192.168.123.224 MTU 1500
VM3: eth0 ip: 192.168.123.240 MTU 1500
Reproduce:
VM1 send 1400 bytes UDP data to VM3 using tools scapy with flags=0.
scapy command:
send(IP(dst="192.168.123.240",flags=0)/UDP()/str('0'*1400),count=1,
inter=1.000000)
Result:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
FragOKs FragFails FragCreates
Ip: 1 64 11 0 3 4 0 0 4 7 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
FragOKs FragFails FragCreates
Ip: 1 64 12 0 3 5 0 0 4 8 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
"ForwDatagrams" increase from 4 to 5 and "OutRequests" also increase
from 7 to 8.
Issue description and patch:
IPSTATS_MIB_OUTPKTS("OutRequests") is counted with IPSTATS_MIB_OUTOCTETS
("OutOctets") in ip_finish_output2().
According to RFC 4293, it is "OutOctets" counted with "OutTransmits" but
not "OutRequests". "OutRequests" does not include any datagrams counted
in "ForwDatagrams".
ipSystemStatsOutOctets OBJECT-TYPE
DESCRIPTION
"The total number of octets in IP datagrams delivered to the
lower layers for transmission. Octets from datagrams
counted in ipIfStatsOutTransmits MUST be counted here.
ipSystemStatsOutRequests OBJECT-TYPE
DESCRIPTION
"The total number of IP datagrams that local IP user-
protocols (including ICMP) supplied to IP in requests for
transmission. Note that this counter does not include any
datagrams counted in ipSystemStatsOutForwDatagrams.
So do patch to define IPSTATS_MIB_OUTPKTS to "OutTransmits" and add
IPSTATS_MIB_OUTREQUESTS for "OutRequests".
Add IPSTATS_MIB_OUTREQUESTS counter in __ip_local_out() for ipv4 and add
IPSTATS_MIB_OUT counter in ip6_finish_output2() for ipv6.
Test result with patch:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 9 0 5 1 0 0 3 3 0 0 0 0 0 0 0 0 0 4
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 2976 1896 0 0 0 0 0 9 0 0 0 0
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 10 0 5 2 0 0 3 3 0 0 0 0 0 0 0 0 0 5
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 4404 3324 0 0 0 0 0 10 0 0 0 0
----------------------------------------------------------------------
"ForwDatagrams" increase from 1 to 2 and "OutRequests" is keeping 3.
"OutTransmits" increase from 4 to 5 and "OutOctets" increase 1428.
Signed-off-by: Heng Guo <heng.guo@windriver.com>
Reviewed-by: Kun Song <Kun.Song@windriver.com>
Reviewed-by: Filip Pudak <filip.pudak@windriver.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP protocol can acquire the subflow-level socket lock and
cause the tcp backlog usage. When inserting new skbs into the
backlog, the stack will try to coalesce them.
Currently, we have no check in place to ensure that such coalescing
will respect the MPTCP-level DSS, and that may cause data stream
corruption, as reported by Christoph.
Address the issue by adding the relevant admission check for coalescing
in tcp_add_backlog().
Note the issue is not easy to reproduce, as the MPTCP protocol tries
hard to avoid acquiring the subflow-level socket lock.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/420
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-2-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the blamed commit below, I completely forgot to release the acquired
resources before erroring out in the TCP BPF code, as reported by Dan.
Address the issues by replacing the bogus return with a jump to the
relevant cleanup code.
Fixes: 419ce133ab ("tcp: allow again tcp_disconnect() when threads are waiting")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/8f99194c698bcef12666f0a9a999c58f8b1cb52c.1697557782.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 75eefc6c59 ("tcp: tsq: add a shortcut in tcp_small_queue_check()")
we allowed to send an skb regardless of TSQ limits being hit if rtx queue
was empty or had a single skb, in order to better fill the pipe
when/if TX completions were slow.
Then later, commit 75c119afe1 ("tcp: implement rb-tree based
retransmit queue") accidentally removed the special case for
one skb in rtx queue.
Stefan Wahren reported a regression in single TCP flow throughput
using a 100Mbit fec link, starting from commit 65466904b0 ("tcp: adjust
TSO packet sizes based on min_rtt"). This last commit only made the
regression more visible, because it locked the TCP flow on a particular
behavior where TSQ prevented two skbs being pushed downstream,
adding silences on the wire between each TSO packet.
Many thanks to Stefan for his invaluable help !
Fixes: 75c119afe1 ("tcp: implement rb-tree based retransmit queue")
Link: https://lore.kernel.org/netdev/7f31ddc8-9971-495e-a1f6-819df542e0af@gmx.net/
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231017124526.4060202-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These checks assume that the caller only returns NF_DROP without
any errno embedded in the upper bits.
This is fine right now, but followup patches will start to propagate
such errors to allow kfree_skb_drop_reason() in the called functions,
those would then indicate 'errno << 8 | NF_STOLEN'.
To not break things we have to mask those parts out.
Signed-off-by: Florian Westphal <fw@strlen.de>
-----BEGIN PGP SIGNATURE-----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=yHtO
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2023-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2023-10-17
1) Fix a slab-use-after-free in xfrm_policy_inexact_list_reinsert.
From Dong Chenchen.
2) Fix data-races in the xfrm interfaces dev->stats fields.
From Eric Dumazet.
3) Fix a data-race in xfrm_gen_index.
From Eric Dumazet.
4) Fix an inet6_dev refcount underflow.
From Zhang Changzhong.
5) Check the return value of pskb_trim in esp_remove_trailer
for esp4 and esp6. From Ma Ke.
6) Fix a data-race in xfrm_lookup_with_ifid.
From Eric Dumazet.
* tag 'ipsec-2023-10-17' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix a data-race in xfrm_lookup_with_ifid()
net: ipv4: fix return value check in esp_remove_trailer
net: ipv6: fix return value check in esp_remove_trailer
xfrm6: fix inet6_dev refcount underflow problem
xfrm: fix a data-race in xfrm_gen_index()
xfrm: interface: use DEV_STATS_INC()
net: xfrm: skip policies marked as dead while reinserting policies
====================
Link: https://lore.kernel.org/r/20231017083723.1364940-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We discovered from packet traces of slow loss recovery on kernels with
the default HZ=250 setting (and min_rtt < 1ms) that after reordering,
when receiving a SACKed sequence range, the RACK reordering timer was
firing after about 16ms rather than the desired value of roughly
min_rtt/4 + 2ms. The problem is largely due to the RACK reorder timer
calculation adding in TCP_TIMEOUT_MIN, which is 2 jiffies. On kernels
with HZ=250, this is 2*4ms = 8ms. The TLP timer calculation has the
exact same issue.
This commit fixes the TLP transmit timer and RACK reordering timer
floor calculation to more closely match the intended 2ms floor even on
kernels with HZ=250. It does this by adding in a new
TCP_TIMEOUT_MIN_US floor of 2000 us and then converting to jiffies,
instead of the current approach of converting to jiffies and then
adding th TCP_TIMEOUT_MIN value of 2 jiffies.
Our testing has verified that on kernels with HZ=1000, as expected,
this does not produce significant changes in behavior, but on kernels
with the default HZ=250 the latency improvement can be large. For
example, our tests show that for HZ=250 kernels at low RTTs this fix
roughly halves the latency for the RACK reorder timer: instead of
mostly firing at 16ms it mostly fires at 8ms.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Fixes: bb4d991a28 ("tcp: adjust tail loss probe timeout")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231015174700.2206872-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZS1d4wAKCRDbK58LschI
g4DSAP441CdKh8fd+wNKUSKHFbpCQ6EvocR6Nf+Sj2DFUx/w/QEA7mfju7Abqjc3
xwDEx0BuhrjMrjV5MmEpxc7lYl9XcQU=
=vuWk
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP pingpong threshold is 1 by default. But some applications, like SQL DB
may prefer a higher pingpong threshold to activate delayed acks in quick
ack mode for better performance.
The pingpong threshold and related code were changed to 3 in the year
2019 in:
commit 4a41f453be ("tcp: change pingpong threshold to 3")
And reverted to 1 in the year 2022 in:
commit 4d8f24eeed ("Revert "tcp: change pingpong threshold to 3"")
There is no single value that fits all applications.
Add net.ipv4.tcp_pingpong_thresh sysctl tunable, so it can be tuned for
optimal performance based on the application needs.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/1697056244-21888-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 451ef36bd2 ("ip_tunnels: Add new flow flags field to
ip_tunnel_key") added a new field to struct ip_tunnel_key to control
route lookups. Currently the flag is used by vxlan and geneve tunnels;
use it also in udp_tunnel_dst_lookup() so that it affects all tunnel
types relying on this function.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is now UDP-specific, the protocol is always IPPROTO_UDP.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the moment ip_route_output_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel_dst_lookup() and move it to file
net/ipv4/udp_tunnel_core.c.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was reported that there is a compiler warning on the unused variable
"sin_addr_len" in af_inet.c when CONFIG_CGROUP_BPF is not set.
This patch is to address it similar to the ipv6 counterpart
in inet6_getname(). It is to "return sin_addr_len;"
instead of "return sizeof(*sin);".
Fixes: fefba7d1ae ("bpf: Propagate modified uaddrlen from cgroup sockaddr programs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/bpf/20231013185702.3993710-1-martin.lau@linux.dev
Closes: https://lore.kernel.org/bpf/20231013114007.2fb09691@canb.auug.org.au/
syzbot reported a warning [0] introduced by commit c48ef9c4ae ("tcp: Fix
bind() regression for v4-mapped-v6 non-wildcard address.").
After the cited commit, a v4 socket's address matches the corresponding
v4-mapped-v6 tb2 in inet_bind2_bucket_match_addr(), not vice versa.
During X.X.X.X -> ::ffff:X.X.X.X order bind()s, the second bind() uses
bhash and conflicts properly without checking bhash2 so that we need not
check if a v4-mapped-v6 sk matches the corresponding v4 address tb2 in
inet_bind2_bucket_match_addr(). However, the repro shows that we need
to check that in a no-conflict case.
The repro bind()s two sockets to the 2-tuples using SO_REUSEPORT and calls
listen() for the first socket:
from socket import *
s1 = socket()
s1.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1)
s1.bind(('127.0.0.1', 0))
s2 = socket(AF_INET6)
s2.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1)
s2.bind(('::ffff:127.0.0.1', s1.getsockname()[1]))
s1.listen()
The second socket should belong to the first socket's tb2, but the second
bind() creates another tb2 bucket because inet_bind2_bucket_find() returns
NULL in inet_csk_get_port() as the v4-mapped-v6 sk does not match the
corresponding v4 address tb2.
bhash2[] -> tb2(::ffff:X.X.X.X) -> tb2(X.X.X.X)
Then, listen() for the first socket calls inet_csk_get_port(), where the
v4 address matches the v4-mapped-v6 tb2 and WARN_ON() is triggered.
To avoid that, we need to check if v4-mapped-v6 sk address matches with
the corresponding v4 address tb2 in inet_bind2_bucket_match().
The same checks are needed in inet_bind2_bucket_addr_match() too, so we
can move all checks there and call it from inet_bind2_bucket_match().
Note that now tb->family is just an address family of tb->(v6_)?rcv_saddr
and not of sockets in the bucket. This could be refactored later by
defining tb->rcv_saddr as tb->v6_rcv_saddr.s6_addr32[3] and prepending
::ffff: when creating v4 tb2.
[0]:
WARNING: CPU: 0 PID: 5049 at net/ipv4/inet_connection_sock.c:587 inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587
Modules linked in:
CPU: 0 PID: 5049 Comm: syz-executor288 Not tainted 6.6.0-rc2-syzkaller-00018-g2cf0f7156238 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
RIP: 0010:inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587
Code: 7c 24 08 e8 4c b6 8a 01 31 d2 be 88 01 00 00 48 c7 c7 e0 94 ae 8b e8 59 2e a3 f8 2e 2e 2e 31 c0 e9 04 fe ff ff e8 ca 88 d0 f8 <0f> 0b e9 0f f9 ff ff e8 be 88 d0 f8 49 8d 7e 48 e8 65 ca 5a 00 31
RSP: 0018:ffffc90003abfbf0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888026429100 RCX: 0000000000000000
RDX: ffff88807edcbb80 RSI: ffffffff88b73d66 RDI: ffff888026c49f38
RBP: ffff888026c49f30 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff9260f200
R13: ffff888026c49880 R14: 0000000000000000 R15: ffff888026429100
FS: 00005555557d5380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 0000000025754000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
inet_csk_listen_start+0x155/0x360 net/ipv4/inet_connection_sock.c:1256
__inet_listen_sk+0x1b8/0x5c0 net/ipv4/af_inet.c:217
inet_listen+0x93/0xd0 net/ipv4/af_inet.c:239
__sys_listen+0x194/0x270 net/socket.c:1866
__do_sys_listen net/socket.c:1875 [inline]
__se_sys_listen net/socket.c:1873 [inline]
__x64_sys_listen+0x53/0x80 net/socket.c:1873
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f3a5bce3af9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc1a1c79e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a5bce3af9
RDX: 00007f3a5bce3af9 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007f3a5bd565f0 R08: 0000000000000006 R09: 0000000000000006
R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000001
R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001
</TASK>
Fixes: c48ef9c4ae ("tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.")
Reported-by: syzbot+71e724675ba3958edb31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=71e724675ba3958edb31
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231010013814.70571-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reproduce environment:
network with 3 VM linuxs is connected as below:
VM1<---->VM2(latest kernel 6.5.0-rc7)<---->VM3
VM1: eth0 ip: 192.168.122.207 MTU 1800
VM2: eth0 ip: 192.168.122.208, eth1 ip: 192.168.123.224 MTU 1500
VM3: eth0 ip: 192.168.123.240 MTU 1800
Reproduce:
VM1 send 1600 bytes UDP data to VM3 using tools scapy with flags='DF'.
scapy command:
send(IP(dst="192.168.123.240",flags='DF')/UDP()/str('0'*1600),count=1,
inter=1.000000)
Result:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqdss
Ip: 1 64 6 0 2 2 0 0 2 4 0 0 0 0 0 0 0 0 0
......
root@qemux86-64:~#
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqdss
Ip: 1 64 7 0 2 2 0 0 2 5 0 0 0 0 0 0 0 1 0
......
root@qemux86-64:~#
----------------------------------------------------------------------
ForwDatagrams is always keeping 2 without increment.
Issue description and patch:
ip_exceeds_mtu() in ip_forward() drops this IP datagram because skb len
(1600 sending by scapy) is over MTU(1500 in VM2) if "DF" is set.
According to RFC 4293 "3.2.3. IP Statistics Tables",
+-------+------>------+----->-----+----->-----+
| InForwDatagrams (6) | OutForwDatagrams (6) |
| V +->-+ OutFragReqds
| InNoRoutes | | (packets)
/ (local packet (3) | |
| IF is that of the address | +--> OutFragFails
| and may not be the receiving IF) | | (packets)
the IPSTATS_MIB_OUTFORWDATAGRAMS should be counted before fragment
check.
The existing implementation, instead, would incease the counter after
fragment check: ip_exceeds_mtu() in ipv4 and ip6_pkt_too_big() in ipv6.
So do patch to move IPSTATS_MIB_OUTFORWDATAGRAMS counter to ip_forward()
for ipv4 and ip6_forward() for ipv6.
Test result with patch:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqdss
Ip: 1 64 6 0 2 2 0 0 2 4 0 0 0 0 0 0 0 0 0
......
root@qemux86-64:~#
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
OutDiscards OutNoRoutes ReasmTimeout ReasmReqdss
Ip: 1 64 7 0 2 3 0 0 2 5 0 0 0 0 0 0 0 1 0
......
root@qemux86-64:~#
----------------------------------------------------------------------
ForwDatagrams is updated from 2 to 3.
Reviewed-by: Filip Pudak <filip.pudak@windriver.com>
Signed-off-by: Heng Guo <heng.guo@windriver.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231011015137.27262-1-heng.guo@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c ("bpf: Fix verifier log for async callback return values")
a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_stream_alloc_skb() initializes the skb to use tcp_tsorted_anchor
which is a union with the destructor. We need to clean that
TCP-iness up before freeing.
Fixes: 736013292e ("tcp: let tcp_mtu_probe() build headless packets")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231010173651.3990234-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As prep for adding unix socket support to the cgroup sockaddr hooks,
let's propagate the sockaddr length back to the caller after running
a bpf cgroup sockaddr hook program. While not important for AF_INET or
AF_INET6, the sockaddr length is important when working with AF_UNIX
sockaddrs as the size of the sockaddr cannot be determined just from the
address family or the sockaddr's contents.
__cgroup_bpf_run_filter_sock_addr() is modified to take the uaddrlen as
an input/output argument. After running the program, the modified sockaddr
length is stored in the uaddrlen pointer.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-3-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This commit changes the data receiver repath behavior to occur after
receiving a single duplicate. This can help recover ACK connectivity
quicker if a TLP was sent along a nonworking path.
For instance, consider the case where we have an initially nonworking
forward path and reverse path and subsequently switch to only working
forward paths. Before this patch we would have the following behavior.
+---------+--------+--------+----------+----------+----------+
| Event | For FL | Rev FL | FP Works | RP Works | Data Del |
+---------+--------+--------+----------+----------+----------+
| Initial | A | 1 | N | N | 0 |
+---------+--------+--------+----------+----------+----------+
| TLP | A | 1 | N | N | 0 |
+---------+--------+--------+----------+----------+----------+
| RTO 1 | B | 1 | Y | N | 1 |
+---------+--------+--------+----------+----------+----------+
| RTO 2 | C | 1 | Y | N | 2 |
+---------+--------+--------+----------+----------+----------+
| RTO 3 | D | 2 | Y | Y | 3 |
+---------+--------+--------+----------+----------+----------+
This patch gets rid of at least RTO 3, avoiding additional unnecessary
repaths of a working forward path to a (potentially) nonworking one.
In addition, this commit changes the behavior to avoid repathing upon
rx of duplicate data if the local endpoint is in CA_Loss (in which
case the RTOs will already be changing the outgoing flowlabel).
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to better estimate whether a data packet has been
retransmitted or is the result of a TLP, we save the last received
ipv6 flowlabel.
To make space for this field we resize the "ato" field in
inet_connection_sock as the current value of TCP_DELACK_MAX can be
fully contained in 8 bits and add a compile_time_assert ensuring this
field is the required size.
v2: addressed kernel bot feedback about dccp_delack_timer()
v3: addressed build error introduced by commit bbf80d713f ("tcp:
derive delack_max from rto_min")
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In esp_remove_trailer(), to avoid an unexpected result returned by
pskb_trim, we should check the return value of pskb_trim().
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Preparation patch, extra arg is not used.
No functional changes intended.
This is needed to replace the xfrm session decode functions with
the flow dissector.
skb_flow_dissect() cannot be used as-is, because it attempts to deduce the
'struct net' to use for bpf program fetch from skb->sk or skb->dev, but
xfrm code path can see skbs that have neither sk or dev filled in.
So either flow dissector needs to try harder, e.g. by also trying
skb->dst->dev, or we have to pass the struct net explicitly.
Passing the struct net doesn't look too bad to me, most places
already have it available or can derive it from the output device.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/netdev/202309271628.27fd2187-oliver.sang@intel.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch enables the GRO codepath for IPv6 ESP in UDP encapsulated
packets. Decapsulation happens at L2 and saves a full round through
the stack for each packet. This is also needed to support HW offload
for ESP in UDP encapsulation.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
This patch enables the GRO codepath for IPv4 ESP in UDP encapsulated
packets. Decapsulation happens at L2 and saves a full round through
the stack for each packet. This is also needed to support HW offload
for ESP in UDP encapsulation.
Enabling this would imporove performance for ESP in UDP datapath, i.e
IPsec with NAT in between.
By default GRP for ESP-in-UDP is disabled for UDP sockets.
To enable this feature for an ESP socket, the following two options
need to be set:
1. enable ESP-in-UDP: (this is already set by an IKE daemon).
int type = UDP_ENCAP_ESPINUDP;
setsockopt(fd, SOL_UDP, UDP_ENCAP, &type, sizeof(type));
2. To enable GRO for ESP in UDP socket:
type = true;
setsockopt(fd, SOL_UDP, UDP_GRO, &type, sizeof(type));
Enabling ESP-in-UDP has the side effect of preventing the Linux stack from
seeing ESP packets at the L3 (when ESP OFFLOAD is disabled), as packets are
immediately decapsulated from UDP and decrypted.
This change may affect nftable rules that match on ESP packets at L3.
Also tcpdump won't see the ESP packet.
Developers/admins are advised to review and adapt any nftable rules
accordingly before enabling this feature to prevent potential rule breakage.
Also tcpdump will not see from ESP packets from a ESP in UDP flow, when this
is enabled.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
This is needed to support GRO for ESP in UDP encapsulation.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
This commit fixes poor delayed ACK behavior that can cause poor TCP
latency in a particular boundary condition: when an application makes
a TCP socket write that is an exact multiple of the MSS size.
The problem is that there is painful boundary discontinuity in the
current delayed ACK behavior. With the current delayed ACK behavior,
we have:
(1) If an app reads data when > 1*MSS is unacknowledged, then
tcp_cleanup_rbuf() ACKs immediately because of:
tp->rcv_nxt - tp->rcv_wup > icsk->icsk_ack.rcv_mss ||
(2) If an app reads all received data, and the packets were < 1*MSS,
and either (a) the app is not ping-pong or (b) we received two
packets < 1*MSS, then tcp_cleanup_rbuf() ACKs immediately beecause
of:
((icsk->icsk_ack.pending & ICSK_ACK_PUSHED2) ||
((icsk->icsk_ack.pending & ICSK_ACK_PUSHED) &&
!inet_csk_in_pingpong_mode(sk))) &&
(3) *However*: if an app reads exactly 1*MSS of data,
tcp_cleanup_rbuf() does not send an immediate ACK. This is true
even if the app is not ping-pong and the 1*MSS of data had the PSH
bit set, suggesting the sending application completed an
application write.
Thus if the app is not ping-pong, we have this painful case where
>1*MSS gets an immediate ACK, and <1*MSS gets an immediate ACK, but a
write whose last skb is an exact multiple of 1*MSS can get a 40ms
delayed ACK. This means that any app that transfers data in one
direction and takes care to align write size or packet size with MSS
can suffer this problem. With receive zero copy making 4KB MSS values
more common, it is becoming more common to have application writes
naturally align with MSS, and more applications are likely to
encounter this delayed ACK problem.
The fix in this commit is to refine the delayed ACK heuristics with a
simple check: immediately ACK a received 1*MSS skb with PSH bit set if
the app reads all data. Why? If an skb has a len of exactly 1*MSS and
has the PSH bit set then it is likely the end of an application
write. So more data may not be arriving soon, and yet the data sender
may be waiting for an ACK if cwnd-bound or using TX zero copy. Thus we
set ICSK_ACK_PUSHED in this case so that tcp_cleanup_rbuf() will send
an ACK immediately if the app reads all of the data and is not
ping-pong. Note that this logic is also executed for the case where
len > MSS, but in that case this logic does not matter (and does not
hurt) because tcp_cleanup_rbuf() will always ACK immediately if the
app reads data and there is more than an MSS of unACKed data.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Guo <guoxin0309@gmail.com>
Link: https://lore.kernel.org/r/20231001151239.1866845-2-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit fixes quick-ack counting so that it only considers that a
quick-ack has been provided if we are sending an ACK that newly
acknowledges data.
The code was erroneously using the number of data segments in outgoing
skbs when deciding how many quick-ack credits to remove. This logic
does not make sense, and could cause poor performance in
request-response workloads, like RPC traffic, where requests or
responses can be multi-segment skbs.
When a TCP connection decides to send N quick-acks, that is to
accelerate the cwnd growth of the congestion control module
controlling the remote endpoint of the TCP connection. That quick-ack
decision is purely about the incoming data and outgoing ACKs. It has
nothing to do with the outgoing data or the size of outgoing data.
And in particular, an ACK only serves the intended purpose of allowing
the remote congestion control to grow the congestion window quickly if
the ACK is ACKing or SACKing new data.
The fix is simple: only count packets as serving the goal of the
quickack mechanism if they are ACKing/SACKing new data. We can tell
whether this is the case by checking inet_csk_ack_scheduled(), since
we schedule an ACK exactly when we are ACKing/SACKing new data.
Fixes: fc6415bcb0 ("[TCP]: Fix quick-ack decrementing with TSO.")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to a small omission, the offload_failed flag is missing from ipv4
fibmatch results. Make sure it is set correctly.
The issue can be witnessed using the following commands:
echo "1 1" > /sys/bus/netdevsim/new_device
ip link add dummy1 up type dummy
ip route add 192.0.2.0/24 dev dummy1
echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload
ip route add 198.51.100.0/24 dev dummy1
ip route
# 192.168.15.0/24 has rt_trap
# 198.51.100.0/24 has rt_offload_failed
ip route get 192.168.15.1 fibmatch
# Result has rt_trap
ip route get 198.51.100.1 fibmatch
# Result differs from the route shown by `ip route`, it is missing
# rt_offload_failed
ip link del dev dummy1
echo 1 > /sys/bus/netdevsim/del_device
Fixes: 36c5100e85 ("IPv4: Add "offload failed" indication to routes")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZRqk1wAKCRDbK58LschI
g8GRAQC4E0bw6BTFRl0b3MxvpZES6lU0BUtX2gKVK4tLZdXw/wEAmTlBXQqNzF3b
BkCQknVbFTSw/8l8pzUW123Fb46wUAQ=
=E3hd
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-10-02
We've added 11 non-merge commits during the last 12 day(s) which contain
a total of 12 files changed, 176 insertions(+), 41 deletions(-).
The main changes are:
1) Fix BPF verifier to reset backtrack_state masks on global function
exit as otherwise subsequent precision tracking would reuse them,
from Andrii Nakryiko.
2) Several sockmap fixes for available bytes accounting,
from John Fastabend.
3) Reject sk_msg egress redirects to non-TCP sockets given this
is only supported for TCP sockets today, from Jakub Sitnicki.
4) Fix a syzkaller splat in bpf_mprog when hitting maximum program
limits with BPF_F_BEFORE directive, from Daniel Borkmann
and Nikolay Aleksandrov.
5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust
size_index for selecting a bpf_mem_cache, from Hou Tao.
6) Fix arch_prepare_bpf_trampoline return code for s390 JIT,
from Song Liu.
7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off,
from Leon Hwang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use kmalloc_size_roundup() to adjust size_index
selftest/bpf: Add various selftests for program limits
bpf, mprog: Fix maximum program check on mprog attachment
bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
bpf, sockmap: Add tests for MSG_F_PEEK
bpf, sockmap: Do not inc copied_seq when PEEK flag set
bpf: tcp_read_skb needs to pop skb regardless of seq
bpf: unconditionally reset backtrack_state masks on global func exit
bpf: Fix tr dereferencing
selftests/bpf: Check bpf_cubic_acked() is called via struct_ops
s390/bpf: Let arch_prepare_bpf_trampoline return program size
====================
Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'n_tables' is small, UDP_TUNNEL_NIC_MAX_TABLES = 4 as a maximum. So there
is no real point to allocate the 'entries' pointers array with a dedicate
memory allocation.
Using a flexible array for struct udp_tunnel_nic->entries avoids the
overhead of an additional memory allocation.
This also saves an indirection when the array is accessed.
Finally, __counted_by() can be used for run-time bounds checking if
configured and supported by the compiler.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/4a096ba9cf981a588aa87235bb91e933ee162b3d.1695542544.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is inspired by several syzbot reports where
tcp_metrics_flush_all() was seen in the traces.
We can avoid acquiring tcp_metrics_lock for empty buckets,
and we should add one cond_resched() to break potential long loops.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_init_metrics() only wants to get metrics if they were
previously stored in the cache. Creating an entry is adding
useless costs, especially when tcp_no_metrics_save is set.
Fixes: 51c5d0c4b1 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to set tp->snd_ssthresh to TCP_INFINITE_SSTHRESH
in the case tcp_get_metrics() fails for some reason.
Fixes: 9ad7c049f0 ("tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open side")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When removing an item from RCU protected list, we must prevent
store-tearing, using rcu_assign_pointer() or WRITE_ONCE().
Fixes: 04f721c671 ("tcp_metrics: Rewrite tcp_metrics_flush_all")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After deleting an interface address in fib_del_ifaddr(), the function
scans the fib_info list for stray entries and calls fib_flush() and
fib_table_flush(). Then the stray entries will be deleted silently and no
RTM_DELROUTE notification will be sent.
This lack of notification can make routing daemons, or monitor like
`ip monitor route` miss the routing changes. e.g.
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dummy1 up
+ ip link set dummy2 up
+ ip addr add 192.168.5.5/24 dev dummy1
+ ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5
+ ip -4 route
7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
As Ido reminded, fib_table_flush() isn't only called when an address is
deleted, but also when an interface is deleted or put down. The lack of
notification in these cases is deliberate. And commit 7c6bb7d2fa
("net/ipv6: Add knob to skip DELROUTE message on device down") introduced
a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send
the route delete notify blindly in fib_table_flush().
To fix this issue, let's add a new flag in "struct fib_info" to track the
deleted prefer source address routes, and only send notify for them.
After update:
+ ip monitor route
+ ip addr del 192.168.5.5/24 dev dummy1
Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5
Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5
Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5
Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5
Suggested-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add missing annotations to inet->mc_index and inet->mc_addr
to fix data-races.
getsockopt(IP_MULTICAST_IF) can be lockless.
setsockopt() side is left for later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current implementation is already lockless, because the socket
lock is released before reading socket fields.
Add missing READ_ONCE() annotations.
Note that corresponding WRITE_ONCE() are needed, the order
of the patches do not really matter.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing READ_ONCE() annotations when reading inet->uc_index
Implementing getsockopt(IP_UNICAST_IF) locklessly seems possible,
the setsockopt() part might not be possible at the moment.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_dst_get() does not require socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet->inet_opt being RCU protected, we can use RCU instead
of locking the socket.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some reads of inet->tos are racy.
Add needed READ_ONCE() annotations and convert IP_TOS option lockless.
v2: missing changes in include/net/route.h (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet->pmtudisc can be read locklessly.
Implement proper lockless reads and writes to inet->pmtudisc
ip_sock_set_mtu_discover() can now be called from arbitrary
contexts.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet->mc_ttl can be read locklessly.
Implement proper lockless reads and writes to inet->mc_ttl
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This field can be read or written without socket lock being held.
Add annotations to avoid load-store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SO_MAX_PACING_RATE setsockopt() does not need to hold
the socket lock, because sk->sk_pacing_rate readers
can run fine if the value is changed by other threads,
after adding READ_ONCE() accessors.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a followup of 8bf43be799 ("net: annotate data-races
around sk->sk_priority").
sk->sk_priority can be read and written without holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While BPF allows to set icsk->->icsk_delack_max
and/or icsk->icsk_rto_min, we have an ip route
attribute (RTAX_RTO_MIN) to be able to tune rto_min,
but nothing to consequently adjust max delayed ack,
which vary from 40ms to 200 ms (TCP_DELACK_{MIN|MAX}).
This makes RTAX_RTO_MIN of almost no practical use,
unless customers are in big trouble.
Modern days datacenter communications want to set
rto_min to ~5 ms, and the max delayed ack one jiffie
smaller to avoid spurious retransmits.
After this patch, an "rto_min 5" route attribute will
effectively lower max delayed ack timers to 4 ms.
Note in the following ss output, "rto:6 ... ato:4"
$ ss -temoi dst XXXXXX
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
ESTAB 0 0 [2002:a05:6608:295::]:52950 [2002:a05:6608:297::]:41597
ino:255134 sk:1001 <->
skmem:(r0,rb1707063,t872,tb262144,f0,w0,o0,bl0,d0) ts sack
cubic wscale:8,8 rto:6 rtt:0.02/0.002 ato:4 mss:4096 pmtu:4500
rcvmss:536 advmss:4096 cwnd:10 bytes_sent:54823160 bytes_acked:54823121
bytes_received:54823120 segs_out:1370582 segs_in:1370580
data_segs_out:1370579 data_segs_in:1370578 send 16.4Gbps
pacing_rate 32.6Gbps delivery_rate 1.72Gbps delivered:1370579
busy:26920ms unacked:1 rcv_rtt:34.615 rcv_space:65920
rcv_ssthresh:65535 minrtt:0.015 snd_wnd:65536
While we could argue this patch fixes a bug with RTAX_RTO_MIN,
I do not add a Fixes: tag, so that we can soak it a bit before
asking backports to stable branches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When data is peek'd off the receive queue we shouldn't considered it
copied from tcp_sock side. When we increment copied_seq this will confuse
tcp_data_ready() because copied_seq can be arbitrarily increased. From
application side it results in poll() operations not waking up when
expected.
Notice tcp stack without BPF recvmsg programs also does not increment
copied_seq.
We broke this when we moved copied_seq into recvmsg to only update when
actual copy was happening. But, it wasn't working correctly either before
because the tcp_data_ready() tried to use the copied_seq value to see
if data was read by user yet. See fixes tags.
Fixes: e5c6de5fa0 ("bpf, sockmap: Incorrectly handling copied_seq")
Fixes: 04919bed94 ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-3-john.fastabend@gmail.com
Before fix e5c6de5fa0 tcp_read_skb() would increment the tp->copied-seq
value. This (as described in the commit) would cause an error for apps
because once that is incremented the application might believe there is no
data to be read. Then some apps would stall or abort believing no data is
available.
However, the fix is incomplete because it introduces another issue in
the skb dequeue. The loop does tcp_recv_skb() in a while loop to consume
as many skbs as possible. The problem is the call is ...
tcp_recv_skb(sk, seq, &offset)
... where 'seq' is:
u32 seq = tp->copied_seq;
Now we can hit a case where we've yet incremented copied_seq from BPF side,
but then tcp_recv_skb() fails this test ...
if (offset < skb->len || (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN))
... so that instead of returning the skb we call tcp_eat_recv_skb() which
frees the skb. This is because the routine believes the SKB has been collapsed
per comment:
/* This looks weird, but this can happen if TCP collapsing
* splitted a fat GRO packet, while we released socket lock
* in skb_splice_bits()
*/
This can't happen here we've unlinked the full SKB and orphaned it. Anyways
it would confuse any BPF programs if the data were suddenly moved underneath
it.
To fix this situation do simpler operation and just skb_peek() the data
of the queue followed by the unlink. It shouldn't need to check this
condition and tcp_read_skb() reads entire skbs so there is no need to
handle the 'offset!=0' case as we would see in tcp_read_sock().
Fixes: e5c6de5fa0 ("bpf, sockmap: Incorrectly handling copied_seq")
Fixes: 04919bed94 ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-2-john.fastabend@gmail.com
Currently, we assume the skb is associated with a device before calling
__ip_options_compile, which is not always the case if it is re-routed by
ipvs.
When skb->dev is NULL, dev_net(skb->dev) will become null-dereference.
This patch adds a check for the edge case and switch to use the net_device
from the rtable when skb->dev is NULL.
Fixes: ed0de45a10 ("ipv4: recompile ip options in ipv4_link_failure")
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Cc: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 2023 SIGCOMM paper "Improving Network Availability with Protective
ReRoute" has indicated Linux TCP's RTO-triggered txhash rehashing can
effectively reduce application disruption during outages. To better
measure the efficacy of this feature, this patch adds three more
detailed stats during RTO recovery and exports via TCP_INFO.
Applications and monitoring systems can leverage this data to measure
the network path diversity and end-to-end repair latency during network
outages to improve their network infrastructure.
The following counters are added to tcp_sock in order to track RTO
events over the lifetime of a TCP socket.
1. u16 total_rto - Counts the total number of RTO timeouts.
2. u16 total_rto_recoveries - Counts the total number of RTO recoveries.
3. u32 total_rto_time - Counts the total time spent (ms) in RTO
recoveries. (time spent in CA_Loss and
CA_Recovery states)
To compute total_rto_time, we add a new u32 rto_stamp field to
tcp_sock. rto_stamp records the start timestamp (ms) of the last RTO
recovery (CA_Loss).
Corresponding fields are also added to the tcp_info struct.
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For passive TCP Fast Open sockets that had SYN/ACK timeout and did not
send more data in SYN_RECV, upon receiving the final ACK in 3WHS, the
congestion state may awkwardly stay in CA_Loss mode unless the CA state
was undone due to TCP timestamp checks. However, if
tcp_rcv_synrecv_state_fastopen() decides not to undo, then we should
enter CA_Open, because at that point we have received an ACK covering
the retransmitted SYNACKs. Currently, the icsk_ca_state is only set to
CA_Open after we receive an ACK for a data-packet. This is because
tcp_ack does not call tcp_fastretrans_alert (and tcp_process_loss) if
!prior_packets
Note that tcp_process_loss() calls tcp_try_undo_recovery(), so having
tcp_rcv_synrecv_state_fastopen() decide that if we're in CA_Loss we
should call tcp_try_undo_recovery() is consistent with that, and
low risk.
Fixes: dad8cea7ad ("tcp: fix TFO SYNACK undo to avoid double-timestamp-undo")
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
np->sndflow reads are racy.
Use one bit ftom atomic inet->inet_flags instead,
IPV6_FLOWINFO_SEND setsockopt() can be lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
np->recverr is moved to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'state->im' value will always be non-zero after
the 'while' statement, so the check can be removed.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230912084039.1501984-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
udp->pcflag, udp->pcslen and udp->pcrlen reads/writes are racy.
Move udp->pcflag to udp->udp_flags for atomicity,
and add READ_ONCE()/WRITE_ONCE() annotations for pcslen and pcrlen.
Fixes: ba4e58eca8 ("[NET]: Supporting UDP-Lite (RFC 3828) in Linux")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This flag is set but never read, we can remove it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move udp->encap_enabled to udp->udp_flags.
Add udp_test_and_set_bit() helper to allow lockless
udp_tunnel_encap_enable() implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These are read locklessly, move them to udp_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
UDP_ENCAP_ESPINUDP_NON_IKE setsockopt() writes over up->encap_rcv
while other cpus read it.
Fixes: 067b207b28 ("[UDP]: Cleanup UDP encapsulation code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported that udp->gro_enabled can be read locklessly.
Use one atomic bit from udp->udp_flags.
Fixes: e20cf8d3f1 ("udp: implement GRO for plain UDP sockets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported that udp->no_check6_rx can be read locklessly.
Use one atomic bit from udp->udp_flags.
Fixes: 1c19448c9b ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported that udp->no_check6_tx can be read locklessly.
Use one atomic bit from udp->udp_flags
Fixes: 1c19448c9b ("net: Make enabling of zero UDP6 csums more restrictive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to syzbot, it is time to use proper atomic flags
for various UDP flags.
Add udp_flags field, and convert udp->corkflag to first
bit in it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since bhash2 was introduced, the example below does not work as expected.
These two bind() should conflict, but the 2nd bind() now succeeds.
from socket import *
s1 = socket(AF_INET6, SOCK_STREAM)
s1.bind(('::ffff:127.0.0.1', 0))
s2 = socket(AF_INET, SOCK_STREAM)
s2.bind(('127.0.0.1', s1.getsockname()[1]))
During the 2nd bind() in inet_csk_get_port(), inet_bind2_bucket_find()
fails to find the 1st socket's tb2, so inet_bind2_bucket_create() allocates
a new tb2 for the 2nd socket. Then, we call inet_csk_bind_conflict() that
checks conflicts in the new tb2 by inet_bhash2_conflict(). However, the
new tb2 does not include the 1st socket, thus the bind() finally succeeds.
In this case, inet_bind2_bucket_match() must check if AF_INET6 tb2 has
the conflicting v4-mapped-v6 address so that inet_bind2_bucket_find()
returns the 1st socket's tb2.
Note that if we bind two sockets to 127.0.0.1 and then ::FFFF:127.0.0.1,
the 2nd bind() fails properly for the same reason mentinoed in the previous
commit.
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrei Vagin reported bind() regression with strace logs.
If we bind() a TCPv6 socket to ::FFFF:0.0.0.0 and then bind() a TCPv4
socket to 127.0.0.1, the 2nd bind() should fail but now succeeds.
from socket import *
s1 = socket(AF_INET6, SOCK_STREAM)
s1.bind(('::ffff:0.0.0.0', 0))
s2 = socket(AF_INET, SOCK_STREAM)
s2.bind(('127.0.0.1', s1.getsockname()[1]))
During the 2nd bind(), if tb->family is AF_INET6 and sk->sk_family is
AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check
if tb has the v4-mapped-v6 wildcard address.
The example above does not work after commit 5456262d2b ("net: Fix
incorrect address comparison when searching for a bind2 bucket"), but
the blamed change is not the commit.
Before the commit, the leading zeros of ::FFFF:0.0.0.0 were treated
as 0.0.0.0, and the sequence above worked by chance. Technically, this
case has been broken since bhash2 was introduced.
Note that if we bind() two sockets to 127.0.0.1 and then ::FFFF:0.0.0.0,
the 2nd bind() fails properly because we fall back to using bhash to
detect conflicts for the v4-mapped-v6 address.
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Andrei Vagin <avagin@google.com>
Closes: https://lore.kernel.org/netdev/ZPuYBOFC8zsK6r9T@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a prep patch to make the following patches cleaner that touch
inet_bind2_bucket_match() and inet_bind2_bucket_match_addr_any().
Both functions have duplicated comparison for netns, port, and l3mdev.
Let's factorise them.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-09-11 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Andrii ensures all VSIs are cleaned up for remove in i40e.
Brett reworks logic for setting promiscuous mode that can, currently, cause
incorrect states on iavf.
---
v2:
- Remove redundant i40e_vsi_free_q_vectors() and kfree() calls (patch 1)
v1: https://lore.kernel.org/netdev/20230905180521.887861-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This idea came after a particular workload requested
the quickack attribute set on routes, and a performance
drop was noticed for large bulk transfers.
For high throughput flows, it is best to use one cpu
running the user thread issuing socket system calls,
and a separate cpu to process incoming packets from BH context.
(With TSO/GRO, bottleneck is usually the 'user' cpu)
Problem is the user thread can spend a lot of time while holding
the socket lock, forcing BH handler to queue most of incoming
packets in the socket backlog.
Whenever the user thread releases the socket lock, it must first
process all accumulated packets in the backlog, potentially
adding latency spikes. Due to flood mitigation, having too many
packets in the backlog increases chance of unexpected drops.
Backlog processing unfortunately shifts a fair amount of cpu cycles
from the BH cpu to the 'user' cpu, thus reducing max throughput.
This patch takes advantage of the backlog processing,
and the fact that ACK are mostly cumulative.
The idea is to detect we are in the backlog processing
and defer all eligible ACK into a single one,
sent from tcp_release_cb().
This saves cpu cycles on both sides, and network resources.
Performance of a single TCP flow on a 200Gbit NIC:
- Throughput is increased by 20% (100Gbit -> 120Gbit).
- Number of generated ACK per second shrinks from 240,000 to 40,000.
- Number of backlog drops per second shrinks from 230 to 0.
Benchmark context:
- Regular netperf TCP_STREAM (no zerocopy)
- Intel(R) Xeon(R) Platinum 8481C (Saphire Rapids)
- MAX_SKB_FRAGS = 17 (~60KB per GRO packet)
This feature is guarded by a new sysctl, and enabled by default:
/proc/sys/net/ipv4/tcp_backlog_ack_defer
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This partially reverts c3f9b01849 ("tcp: tcp_release_cb()
should release socket ownership").
prequeue has been removed by Florian in commit e7942d0633
("tcp: remove prequeue support")
__tcp_checksum_complete_user() being gone, we no longer
have to release socket ownership in tcp_release_cb().
This is a prereq for third patch in the series
("net: call prot->release_cb() when processing backlog").
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since commit 1202cdd66531("Remove DECnet support from kernel") has been
merged, all callers pass in the initial_ref value of 1 when they call
dst_alloc(). Therefore, remove initial_ref when the dst_alloc() is
declared and replace initial_ref with 1 in dst_alloc().
Also when all callers call dst_init(), the value of initial_ref is 1.
Therefore, remove the input parameter initial_ref of the dst_init() and
replace initial_ref with the value 1 in dst_init.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230911125045.346390-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I got the below warning when do fuzzing test:
unregister_netdevice: waiting for bond0 to become free. Usage count = 2
It can be repoduced via:
ip link add bond0 type bond
sysctl -w net.ipv4.conf.bond0.promote_secondaries=1
ip addr add 4.117.174.103/0 scope 0x40 dev bond0
ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0
ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0
ip addr del 4.117.174.103/0 scope 0x40 dev bond0
ip link delete bond0 type bond
In this reproduction test case, an incorrect 'last_prim' is found in
__inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40)
is lost. The memory of the secondary address is leaked and the reference of
in_device and net_device is leaked.
Fix this problem:
Look for 'last_prim' starting at location of the deleted IP and inserting
the promoted IP into the location of 'last_prim'.
Fixes: 0ff60a4567 ("[IPV4]: Fix secondary IP addresses after promotion")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets
are hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YpmE
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
This is a follow up of commit 915d975b2f ("net: deal with integer
overflows in kmalloc_reserve()") based on David Laight feedback.
Back in 2010, I failed to realize malicious users could set dev->mtu
to arbitrary values. This mtu has been since limited to 0x7fffffff but
regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack()
to allocate more than IP_MAX_MTU and risk various skb fields overflows.
Fixes: 57e1ab6ead ("igmp: refine skb allocations")
Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Cc: Kyle Zeng <zengyhkyle@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Route hints when the nexthop is part of a multipath group causes packets
in the same receive batch to be sent to the same nexthop irrespective of
the multipath hash of the packet. So, do not extract route hint for
packets whose destination is part of a multipath group.
A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the
flag when route is looked up in ip_mkroute_input() and use it in
ip_extract_route_hint() to check for the existence of the flag.
Fixes: 02b2494161 ("ipv4: use dst hint for ipv4 list receive")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk->sk_tsflags can be read locklessly, add corresponding annotations.
Fixes: b9f40e21ef ("net-timestamp: move timestamp flags out of sk_flags")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Every time sk->sk_forward_alloc is read locklessly,
add a READ_ONCE().
Add sk_forward_alloc_add() helper to centralize updates,
to reduce number of WRITE_ONCE().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit edf391ff17 ("snmp: add missing counters for RFC 4293") had
already added OutOctets for RFC 4293. In commit 2d8dbb04c6 ("snmp: fix
OutOctets counter to include forwarded datagrams"), OutOctets was
counted again, but not removed from ip_output().
According to RFC 4293 "3.2.3. IP Statistics Tables",
ipipIfStatsOutTransmits is not equal to ipIfStatsOutForwDatagrams. So
"IPSTATS_MIB_OUTOCTETS must be incremented when incrementing" is not
accurate. And IPSTATS_MIB_OUTOCTETS should be counted after fragment.
This patch reverts commit 2d8dbb04c6 ("snmp: fix OutOctets counter to
include forwarded datagrams") and move IPSTATS_MIB_OUTOCTETS to
ip_finish_output2 for ipv4.
Reviewed-by: Filip Pudak <filip.pudak@windriver.com>
Signed-off-by: Heng Guo <heng.guo@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Long ago we set out to remove the kitchen sink on kernel/sysctl.c arrays and
placings sysctls to their own sybsystem or file to help avoid merge conflicts.
Matthew Wilcox pointed out though that if we're going to do that we might as
well also *save* space while at it and try to remove the extra last sysctl
entry added at the end of each array, a sentintel, instead of bloating the
kernel by adding a new sentinel with each array moved.
Doing that was not so trivial, and has required slowing down the moves of
kernel/sysctl.c arrays and measuring the impact on size by each new move.
The complex part of the effort to help reduce the size of each sysctl is being
done by the patient work of el señor Don Joel Granados. A lot of this is truly
painful code refactoring and testing and then trying to measure the savings of
each move and removing the sentinels. Although Joel already has code which does
most of this work, experience with sysctl moves in the past shows is we need to
be careful due to the slew of odd build failures that are possible due to the
amount of random Kconfig options sysctls use.
To that end Joel's work is split by first addressing the major housekeeping
needed to remove the sentinels, which is part of this merge request. The rest
of the work to actually remove the sentinels will be done later in future
kernel releases.
At first I was only going to send his first 7 patches of his patch series,
posted 1 month ago, but in retrospect due to the testing the changes have
received in linux-next and the minor changes they make this goes with the
entire set of patches Joel had planned: just sysctl house keeping. There are
networking changes but these are part of the house keeping too.
The preliminary math is showing this will all help reduce the overall build
time size of the kernel and run time memory consumed by the kernel by about
~64 bytes per array where we are able to remove each sentinel in the future.
That also means there is no more bloating the kernel with the extra ~64 bytes
per array moved as no new sentinels are created.
Most of this has been in linux-next for about a month, the last 7 patches took
a minor refresh 2 week ago based on feedback.
-----BEGIN PGP SIGNATURE-----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=sq2p
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"Long ago we set out to remove the kitchen sink on kernel/sysctl.c
arrays and placings sysctls to their own sybsystem or file to help
avoid merge conflicts. Matthew Wilcox pointed out though that if we're
going to do that we might as well also *save* space while at it and
try to remove the extra last sysctl entry added at the end of each
array, a sentintel, instead of bloating the kernel by adding a new
sentinel with each array moved.
Doing that was not so trivial, and has required slowing down the moves
of kernel/sysctl.c arrays and measuring the impact on size by each new
move.
The complex part of the effort to help reduce the size of each sysctl
is being done by the patient work of el señor Don Joel Granados. A lot
of this is truly painful code refactoring and testing and then trying
to measure the savings of each move and removing the sentinels.
Although Joel already has code which does most of this work,
experience with sysctl moves in the past shows is we need to be
careful due to the slew of odd build failures that are possible due to
the amount of random Kconfig options sysctls use.
To that end Joel's work is split by first addressing the major
housekeeping needed to remove the sentinels, which is part of this
merge request. The rest of the work to actually remove the sentinels
will be done later in future kernel releases.
The preliminary math is showing this will all help reduce the overall
build time size of the kernel and run time memory consumed by the
kernel by about ~64 bytes per array where we are able to remove each
sentinel in the future. That also means there is no more bloating the
kernel with the extra ~64 bytes per array moved as no new sentinels
are created"
* tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: Use ctl_table_size as stopping criteria for list macro
sysctl: SIZE_MAX->ARRAY_SIZE in register_net_sysctl
vrf: Update to register_net_sysctl_sz
networking: Update to register_net_sysctl_sz
netfilter: Update to register_net_sysctl_sz
ax.25: Update to register_net_sysctl_sz
sysctl: Add size to register_net_sysctl function
sysctl: Add size arg to __register_sysctl_init
sysctl: Add size to register_sysctl
sysctl: Add a size arg to __register_sysctl_table
sysctl: Add size argument to init_header
sysctl: Add ctl_table_size to ctl_table_header
sysctl: Use ctl_table_header in list_for_each_table_entry
sysctl: Prefer ctl_table_header in proc_sysctl
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
My recent patch forgot to change error handling for IP_TRANSPARENT
socket option.
WARNING: bad unlock balance detected!
6.5.0-rc7-syzkaller-01717-g59da9885767a #0 Not tainted
-------------------------------------
syz-executor151/5028 is trying to release lock (sk_lock-AF_INET) at:
[<ffffffff88213983>] sockopt_release_sock+0x53/0x70 net/core/sock.c:1073
but there are no more locks to release!
other info that might help us debug this:
1 lock held by syz-executor151/5028:
stack backtrace:
CPU: 0 PID: 5028 Comm: syz-executor151 Not tainted 6.5.0-rc7-syzkaller-01717-g59da9885767a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
__lock_release kernel/locking/lockdep.c:5438 [inline]
lock_release+0x4b5/0x680 kernel/locking/lockdep.c:5781
sock_release_ownership include/net/sock.h:1824 [inline]
release_sock+0x175/0x1b0 net/core/sock.c:3527
sockopt_release_sock+0x53/0x70 net/core/sock.c:1073
do_ip_setsockopt+0x12c1/0x3640 net/ipv4/ip_sockglue.c:1364
ip_setsockopt+0x59/0xe0 net/ipv4/ip_sockglue.c:1419
raw_setsockopt+0x218/0x290 net/ipv4/raw.c:833
__sys_setsockopt+0x2cd/0x5b0 net/socket.c:2305
__do_sys_setsockopt net/socket.c:2316 [inline]
__se_sys_setsockopt net/socket.c:2313 [inline]
Fixes: 4bd0623f04 ("inet: move inet->transparent to inet->inet_flags")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZOjkTAAKCRDbK58LschI
gx32AP9gaaHFBtOYBfoenKTJfMgv1WhtQHIBas+WN9ItmBx9MAEA4gm/VyQ6oD7O
EBjJKJQ2CZ/QKw7cNacXw+l5jF7/+Q0=
=8P7g
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-08-25
We've added 87 non-merge commits during the last 8 day(s) which contain
a total of 104 files changed, 3719 insertions(+), 4212 deletions(-).
The main changes are:
1) Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds,
from Jiri Olsa.
2) Add support BPF cpu v4 instructions for arm64 JIT compiler,
from Xu Kuohai.
3) Add support BPF cpu v4 instructions for riscv64 JIT compiler,
from Pu Lehui.
4) Fix LWT BPF xmit hooks wrt their return values where propagating
the result from skb_do_redirect() would trigger a use-after-free,
from Yan Zhai.
5) Fix a BPF verifier issue related to bpf_kptr_xchg() with local kptr
where the map's value kptr type and locally allocated obj type
mismatch, from Yonghong Song.
6) Fix BPF verifier's check_func_arg_reg_off() function wrt graph
root/node which bypassed reg->off == 0 enforcement,
from Kumar Kartikeya Dwivedi.
7) Lift BPF verifier restriction in networking BPF programs to treat
comparison of packet pointers not as a pointer leak,
from Yafang Shao.
8) Remove unmaintained XDP BPF samples as they are maintained
in xdp-tools repository out of tree, from Toke Høiland-Jørgensen.
9) Batch of fixes for the tracing programs from BPF samples in order
to make them more libbpf-aware, from Daniel T. Lee.
10) Fix a libbpf signedness determination bug in the CO-RE relocation
handling logic, from Andrii Nakryiko.
11) Extend libbpf to support CO-RE kfunc relocations. Also follow-up
fixes for bpf_refcount shared ownership implementation,
both from Dave Marchevsky.
12) Add a new bpf_object__unpin() API function to libbpf,
from Daniel Xu.
13) Fix a memory leak in libbpf to also free btf_vmlinux
when the bpf_object gets closed, from Hao Luo.
14) Small error output improvements to test_bpf module, from Helge Deller.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (87 commits)
selftests/bpf: Add tests for rbtree API interaction in sleepable progs
bpf: Allow bpf_spin_{lock,unlock} in sleepable progs
bpf: Consider non-owning refs to refcounted nodes RCU protected
bpf: Reenable bpf_refcount_acquire
bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes
bpf: Consider non-owning refs trusted
bpf: Ensure kptr_struct_meta is non-NULL for collection insert and refcount_acquire
selftests/bpf: Enable cpu v4 tests for RV64
riscv, bpf: Support unconditional bswap insn
riscv, bpf: Support signed div/mod insns
riscv, bpf: Support 32-bit offset jmp insn
riscv, bpf: Support sign-extension mov insns
riscv, bpf: Support sign-extension load insns
riscv, bpf: Fix missing exception handling and redundant zext for LDX_B/H/W
samples/bpf: Add note to README about the XDP utilities moved to xdp-tools
samples/bpf: Cleanup .gitignore
samples/bpf: Remove the xdp_sample_pkts utility
samples/bpf: Remove the xdp1 and xdp2 utilities
samples/bpf: Remove the xdp_rxq_info utility
samples/bpf: Remove the xdp_redirect* utilities
...
====================
Link: https://lore.kernel.org/r/20230825194319.12727-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the ifdown function in the dst_ops structure is referenced, the input
parameter 'how' is always true. In the current implementation of the
ifdown interface, ip6_dst_ifdown does not use the input parameter 'how',
xfrm6_dst_ifdown and xfrm4_dst_ifdown functions use the input parameter
'unregister'. But false judgment on 'unregister' in xfrm6_dst_ifdown and
xfrm4_dst_ifdown is false, so remove the input parameter 'how' in ifdown
function.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821084104.3812233-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add extack info for IPv4 address add/delete, which would be useful for
users to understand the problem without having to read kernel code.
No extack message for the ifa_local checking in __inet_insert_ifa() as
it has been checked in find_matching_ifa().
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
