Commit Graph

126 Commits

Author SHA1 Message Date
Greg KH
c9e15f25f5 debugfs: allow bad parent pointers to be passed in
If something went wrong with creating a debugfs file/symlink/directory,
that value could be passed down into debugfs again as a parent dentry.
To make caller code simpler, just error out if this happens, and don't
crash the kernel.

Reported-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-04-03 16:30:12 +02:00
Al Viro
0db59e5929 debugfs: leave freeing a symlink body until inode eviction
As it is, we have debugfs_remove() racing with symlink traversals.
Supply ->evict_inode() and do freeing there - inode will remain
pinned until we are done with the symlink body.

And rip the idiocy with checking if dentry is positive right after
we'd verified debugfs_positive(), which is a stronger check...

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-22 11:38:43 -05:00
David Howells
e36cb0b89c VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
Convert the following where appropriate:

 (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).

 (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).

 (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry).  This is actually more
     complicated than it appears as some calls should be converted to
     d_can_lookup() instead.  The difference is whether the directory in
     question is a real dir with a ->lookup op or whether it's a fake dir with
     a ->d_automount op.

In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).

Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer.  In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.

However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.

There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE.  Strictly, this was
intended for special directory entry types that don't have attached inodes.

The following perl+coccinelle script was used:

use strict;

my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
    die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
    print "No matches\n";
    exit(0);
}

my @cocci = (
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISLNK(E->d_inode->i_mode)',
    '+ d_is_symlink(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISDIR(E->d_inode->i_mode)',
    '+ d_is_dir(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISREG(E->d_inode->i_mode)',
    '+ d_is_reg(E)' );

my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);

foreach my $file (@callers) {
    chomp $file;
    print "Processing ", $file, "\n";
    system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
	die "spatch failed";
}

[AV: overlayfs parts skipped]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-22 11:38:41 -05:00
David Howells
e59b4e9187 debugfs: Provide a file creation function that also takes an initial size
Provide a file creation function that also takes an initial size so that the
caller doesn't have to set i_size, thus meaning that we don't have to call
deal with ->d_inode in the callers.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-17 12:21:51 -05:00
Al Viro
77b3da6e32 new primitive: debugfs_create_automount()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:53 -05:00
Al Viro
5233e31191 debugfs: split end_creating() into success and failure cases
... and don't bother with dput(dentry) in the former and with
dget(dentry) preceding all its calls.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:53 -05:00
Al Viro
edac65eaf8 debugfs: take mode-dependent parts of debugfs_get_inode() into callers
... and trim the arguments list

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:53 -05:00
Al Viro
680b302409 fold debugfs_mknod() into callers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:52 -05:00
Al Viro
3473cde565 fold debugfs_create() into caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:52 -05:00
Al Viro
02538a75ba fold debugfs_mkdir() into caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:51 -05:00
Al Viro
160f7592f2 debugfs_mknod(): get rid useless arguments
dev is always zero, dir was only used to get its ->i_sb, which is
equal to ->d_sb of dentry...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:51 -05:00
Al Viro
9b73fab01b fold debugfs_link() into caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:50 -05:00
Al Viro
ad5abd5ba8 debugfs: kill __create_file()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:31 -05:00
Al Viro
190afd81e4 debugfs: split the beginning and the end of __create_file() off
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 15:23:31 -05:00
Al Viro
e09ddf36dd debugfs_{mkdir,create,link}(): get rid of redundant argument
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 15:23:31 -05:00
Linus Torvalds
e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Arend van Spriel
98210b7f73 debugfs: add helper function to create device related seq_file
This patch adds a helper function that simplifies adding a
so-called single_open sequence file for device drivers. The
calling device driver needs to provide a read function and
a device pointer. The field struct seq_file::private will
reference the device pointer upon call to the read function
so the driver can obtain his data from it and do its task
of providing the file content using seq_printf() calls and
alike. Using this helper function also gets rid of the need
to specify file operations per debugfs file.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:38:37 -08:00
Al Viro
8ce74dd605 Merge tag 'trace-seq-file-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into for-next
Pull the beginning of seq_file cleanup from Steven:
  "I'm looking to clean up the seq_file code and to eventually merge the
  trace_seq code with seq_file as well, since they basically do the same thing.

  Part of this process is to remove the return code of seq_printf() and friends
  as they are rather inconsistent. It is better to use the new function
  seq_has_overflowed() if you want to stop processing when the buffer
  is full. Note, if the buffer is full, the seq_file code will throw away
  the contents, allocate a bigger buffer, and then call your code again
  to fill in the data. The only thing that breaking out of the function
  early does is to save a little time which is probably never noticed.

  I started with patches from Joe Perches and modified them as well.
  There's many more places that need to be updated before we can convert
  seq_printf() and friends to return void. But this patch set introduces
  the seq_has_overflowed() and does some initial updates."
2014-11-19 13:02:53 -05:00
Joe Perches
9761536e1d debugfs: Have debugfs_print_regs32() return void
The seq_printf() will soon just return void, and seq_has_overflowed()
should be used instead to see if the seq can no longer accept input.

As the return value of debugfs_print_regs32() has no users and
the seq_file descriptor should be checked with seq_has_overflowed()
instead of return values of functions, it is better to just have
debugfs_print_regs32() also return void.

Link: http://lkml.kernel.org/p/2634b19eb1c04a9d31148c1fe6f1f3819be95349.1412031505.git.joe@perches.com

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joe Perches <joe@perches.com>
[ original change only updated seq_printf() return, added return of
  void to debugfs_print_regs32() as well ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-05 14:13:38 -05:00
Al Viro
946e51f2bf move d_rcu from overlapping d_child to overlapping d_alias
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-03 15:20:29 -05:00
Rahul Bedarkar
88e412ea5e fs: debugfs: remove trailing whitespace
fixes checkpatch.pl trailing whitespace errors

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 16:58:21 -07:00
Steven Rostedt
485d44022a debugfs: Fix corrupted loop in debugfs_remove_recursive
[ I'm currently running my tests on it now, and so far, after a few
 hours it has yet to blow up. I'll run it for 24 hours which it never
 succeeded in the past. ]

The tracing code has a way to make directories within the debugfs file
system as well as deleting them using mkdir/rmdir in the instance
directory. This is very limited in functionality, such as there is
no renames, and the parent directory "instance" can not be modified.
The tracing code creates the instance directory from the debugfs code
and then replaces the dentry->d_inode->i_op with its own to allow
for mkdir/rmdir to work.

When these are called, the d_entry and inode locks need to be released
to call the instance creation and deletion code. That code has its own
accounting and locking to serialize everything to prevent multiple
users from causing harm. As the parent "instance" directory can not
be modified this simplifies things.

I created a stress test that creates several threads that randomly
creates and deletes directories thousands of times a second. The code
stood up to this test and I submitted it a while ago.

Recently I added a new test that adds readers to the mix. While the
instance directories were being added and deleted, readers would read
from these directories and even enable tracing within them. This test
was able to trigger a bug:

 general protection fault: 0000 [#1] PREEMPT SMP
 Modules linked in: ...
 CPU: 3 PID: 17789 Comm: rmdir Tainted: G        W     3.15.0-rc2-test+ #41
 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
 task: ffff88003786ca60 ti: ffff880077018000 task.ti: ffff880077018000
 RIP: 0010:[<ffffffff811ed5eb>]  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
 RSP: 0018:ffff880077019df8  EFLAGS: 00010246
 RAX: 0000000000000002 RBX: ffff88006f0fe490 RCX: 0000000000000000
 RDX: dead000000100058 RSI: 0000000000000246 RDI: ffff88003786d454
 RBP: ffff88006f0fe640 R08: 0000000000000628 R09: 0000000000000000
 R10: 0000000000000628 R11: ffff8800795110a0 R12: ffff88006f0fe640
 R13: ffff88006f0fe640 R14: ffffffff81817d0b R15: ffffffff818188b7
 FS:  00007ff13ae24700(0000) GS:ffff88007d580000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000003054ec7be0 CR3: 0000000076d51000 CR4: 00000000000007e0
 Stack:
  ffff88007a41ebe0 dead000000100058 00000000fffffffe ffff88006f0fe640
  0000000000000000 ffff88006f0fe678 ffff88007a41ebe0 ffff88003793a000
  00000000fffffffe ffffffff810bde82 ffff88006f0fe640 ffff88007a41eb28
 Call Trace:
  [<ffffffff810bde82>] ? instance_rmdir+0x15b/0x1de
  [<ffffffff81132e2d>] ? vfs_rmdir+0x80/0xd3
  [<ffffffff81132f51>] ? do_rmdir+0xd1/0x139
  [<ffffffff8124ad9e>] ? trace_hardirqs_on_thunk+0x3a/0x3c
  [<ffffffff814fea62>] ? system_call_fastpath+0x16/0x1b
 Code: fe ff ff 48 8d 75 30 48 89 df e8 c9 fd ff ff 85 c0 75 13 48 c7 c6 b8 cc d2 81 48 c7 c7 b0 cc d2 81 e8 8c 7a f5 ff 48 8b 54 24 08 <48> 8b 82 a8 00 00 00 48 89 d3 48 2d a8 00 00 00 48 89 44 24 08
 RIP  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
  RSP <ffff880077019df8>

It took a while, but every time it triggered, it was always in the
same place:

	list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) {

Where the child->d_u.d_child seemed to be corrupted.  I added lots of
trace_printk()s to see what was wrong, and sure enough, it was always
the child's d_u.d_child field. I looked around to see what touches
it and noticed that in __dentry_kill() which calls dentry_free():

static void dentry_free(struct dentry *dentry)
{
	/* if dentry was never visible to RCU, immediate free is OK */
	if (!(dentry->d_flags & DCACHE_RCUACCESS))
		__d_free(&dentry->d_u.d_rcu);
	else
		call_rcu(&dentry->d_u.d_rcu, __d_free);
}

I also noticed that __dentry_kill() unlinks the child->d_u.child
under the parent->d_lock spin_lock.

Looking back at the loop in debugfs_remove_recursive() it never takes the
parent->d_lock to do the list walk. Adding more tracing, I was able to
prove this was the issue:

 ftrace-t-15385   1.... 246662024us : dentry_kill <ffffffff81138b91>: free ffff88006d573600
    rmdir-15409   2.... 246662024us : debugfs_remove_recursive <ffffffff811ec7e5>: child=ffff88006d573600 next=dead000000100058

The dentry_kill freed ffff88006d573600 just as the remove recursive was walking
it.

In order to fix this, the list walk needs to be modified a bit to take
the parent->d_lock. The safe version is no longer necessary, as every
time we remove a child, the parent->d_lock must be released and the
list walk must start over. Each time a child is removed, even though it
may still be on the list, it should be skipped by the first check
in the loop:

		if (!debugfs_positive(child))
			continue;

Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 16:37:29 -07:00
Linus Torvalds
24e7ea3bea Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
 in the jbd2 layer and in xattr handling when the extended attributes
 spill over into an external block.
 
 Other than that, the usual clean ups and minor bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTPbD2AAoJENNvdpvBGATwDmUQANSfGYIQazB8XKKgtNTMiG/Y
 Ky7n1JzN9lTX/6nMsqQnbfCweLRmxqpWUBuyKDRHUi8IG0/voXSTFsAOOgz0R15A
 ERRRWkVvHixLpohuL/iBdEMFHwNZYPGr3jkm0EIgzhtXNgk5DNmiuMwvHmCY27kI
 kdNZIw9fip/WRNoFLDBGnLGC37aanoHhCIbVlySy5o9LN1pkC8BgXAYV0Rk19SVd
 bWCudSJEirFEqWS5H8vsBAEm/ioxTjwnNL8tX8qms6orZ6h8yMLFkHoIGWPw3Q15
 a0TSUoMyav50Yr59QaDeWx9uaPQVeK41wiYFI2rZOnyG2ts0u0YXs/nLwJqTovgs
 rzvbdl6cd3Nj++rPi97MTA7iXK96WQPjsDJoeeEgnB0d/qPyTk6mLKgftzLTNgSa
 ZmWjrB19kr6CMbebMC4L6eqJ8Fr66pCT8c/iue8wc4MUHi7FwHKH64fqWvzp2YT/
 +165dqqo2JnUv7tIp6sUi1geun+bmDHLZFXgFa7fNYFtcU3I+uY1mRr3eMVAJndA
 2d6ASe/KhQbpVnjKJdQ8/b833ZS3p+zkgVPrd68bBr3t7gUmX91wk+p1ct6rUPLr
 700F+q/pQWL8ap0pU9Ht/h3gEJIfmRzTwxlOeYyOwDseqKuS87PSB3BzV3dDunSU
 DrPKlXwIgva7zq5/S0Vr
 =4s1Z
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...
2014-04-04 15:39:39 -07:00
Theodore Ts'o
02b9984d64 fs: push sync_filesystem() down to the file system's remount_fs()
Previously, the no-op "mount -o mount /dev/xxx" operation when the
file system is already mounted read-write causes an implied,
unconditional syncfs().  This seems pretty stupid, and it's certainly
documented or guaraunteed to do this, nor is it particularly useful,
except in the case where the file system was mounted rw and is getting
remounted read-only.

However, it's possible that there might be some file systems that are
actually depending on this behavior.  In most file systems, it's
probably fine to only call sync_filesystem() when transitioning from
read-write to read-only, and there are some file systems where this is
not needed at all (for example, for a pseudo-filesystem or something
like romfs).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anders Larsen <al@alarsen.net>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: xfs@oss.sgi.com
Cc: linux-btrfs@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: fuse-devel@lists.sourceforge.net
Cc: cluster-devel@redhat.com
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux-nfs@vger.kernel.org
Cc: linux-nilfs@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: reiserfs-devel@vger.kernel.org
2014-03-13 10:14:33 -04:00
Masanari Iida
e227867f12 treewide: Fix typo in Documentation/DocBook
This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-19 14:58:17 +01:00
Oleg Nesterov
6bc080d8fd debugfs: use list_next_entry() in debugfs_remove_recursive()
Change debugfs_remove_recursive() to use list_next_entry(child), no
changes in generated code.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:24 +09:00
Oleg Nesterov
776164c1fa debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs)
debugfs_remove_recursive() is wrong,

1. it wrongly assumes that !list_empty(d_subdirs) means that this
   dir should be removed.

   This is not that bad by itself, but:

2. if d_subdirs does not becomes empty after __debugfs_remove()
   it gives up and silently fails, it doesn't even try to remove
   other entries.

   However ->d_subdirs can be non-empty because it still has the
   already deleted !debugfs_positive() entries.

3. simple_release_fs() is called even if __debugfs_remove() fails.

Suppose we have

	dir1/
		dir2/
			file2
		file1

and someone opens dir1/dir2/file2.

Now, debugfs_remove_recursive(dir1/dir2) succeeds, and dir1/dir2 goes
away.

But debugfs_remove_recursive(dir1) silently fails and doesn't remove
this directory. Because it tries to delete (the already deleted)
dir1/dir2/file2 again and then fails due to "Avoid infinite loop"
logic.

Test-case:

	#!/bin/sh

	cd /sys/kernel/debug/tracing
	echo 'p:probe/sigprocmask sigprocmask' >> kprobe_events
	sleep 1000 < events/probe/sigprocmask/id &
	echo -n >| kprobe_events

	[ -d events/probe ] && echo "ERR!! failed to rm probe"

And after that it is not possible to create another probe entry.

With this patch debugfs_remove_recursive() skips !debugfs_positive()
files although this is not strictly needed. The most important change
is that it does not try to make ->d_subdirs empty, it simply scans
the whole list(s) recursively and removes as much as possible.

Link: http://lkml.kernel.org/r/20130726151256.GC19472@redhat.com

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-31 12:16:31 -04:00
Mathias Krause
a3b2c8c7aa debugfs: write_file_bool() - ensure strtobool() operates on valid data
In case, userland writes an empty string to a bool debugfs file, buf[]
will still be uninitialized when being passed to strtobool() making the
outcome of that function purely random.

Fix this by always zero-terminating the buffer.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 13:55:02 -07:00
Seth Jennings
3a76e5e09f debugfs: add get/set for atomic types
debugfs currently lack the ability to create attributes
that set/get atomic_t values.

This patch adds support for this through a new
debugfs_create_atomic_t() function.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 13:55:01 -07:00
Eric W. Biederman
7f78e03513 fs: Limit sys_mount to only request filesystem modules.
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 19:36:31 -08:00
Greg Kroah-Hartman
ed408f7c0f Merge 3.9-rc4 into driver-core-next
This is to fix up a build problem with a wireless driver due to the
dynamic-debug patches in this branch.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 19:48:18 -08:00
Sasha Levin
1884bd4b14 debugfs: remove redundant initialization of dentry
We already initialize it to NULL when declaring it, no need to do
that twice.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 13:02:08 -08:00
Dave Reisner
f1688e0431 debugfs: convert gid= argument from decimal, not octal
This patch technically breaks userspace, but I suspect that anyone who
actually used this flag would have encountered this brokenness, declared
it lunacy, and already sent a patch.

Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Reviewed-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11 05:56:01 -08:00
Yan Hong
7dd2517c39 fs/debugsfs: remove unnecessary inode->i_private initialization
inode->i_private is promised to be NULL on allocation, no need to set it
explicitly.

Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 17:46:42 -08:00
Linus Torvalds
437589a74b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace changes from Eric Biederman:
 "This is a mostly modest set of changes to enable basic user namespace
  support.  This allows the code to code to compile with user namespaces
  enabled and removes the assumption there is only the initial user
  namespace.  Everything is converted except for the most complex of the
  filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
  nfs, ocfs2 and xfs as those patches need a bit more review.

  The strategy is to push kuid_t and kgid_t values are far down into
  subsystems and filesystems as reasonable.  Leaving the make_kuid and
  from_kuid operations to happen at the edge of userspace, as the values
  come off the disk, and as the values come in from the network.
  Letting compile type incompatible compile errors (present when user
  namespaces are enabled) guide me to find the issues.

  The most tricky areas have been the places where we had an implicit
  union of uid and gid values and were storing them in an unsigned int.
  Those places were converted into explicit unions.  I made certain to
  handle those places with simple trivial patches.

  Out of that work I discovered we have generic interfaces for storing
  quota by projid.  I had never heard of the project identifiers before.
  Adding full user namespace support for project identifiers accounts
  for most of the code size growth in my git tree.

  Ultimately there will be work to relax privlige checks from
  "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
  root in a user names to do those things that today we only forbid to
  non-root users because it will confuse suid root applications.

  While I was pushing kuid_t and kgid_t changes deep into the audit code
  I made a few other cleanups.  I capitalized on the fact we process
  netlink messages in the context of the message sender.  I removed
  usage of NETLINK_CRED, and started directly using current->tty.

  Some of these patches have also made it into maintainer trees, with no
  problems from identical code from different trees showing up in
  linux-next.

  After reading through all of this code I feel like I might be able to
  win a game of kernel trivial pursuit."

Fix up some fairly trivial conflicts in netfilter uid/git logging code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
  userns: Convert the ufs filesystem to use kuid/kgid where appropriate
  userns: Convert the udf filesystem to use kuid/kgid where appropriate
  userns: Convert ubifs to use kuid/kgid
  userns: Convert squashfs to use kuid/kgid where appropriate
  userns: Convert reiserfs to use kuid and kgid where appropriate
  userns: Convert jfs to use kuid/kgid where appropriate
  userns: Convert jffs2 to use kuid and kgid where appropriate
  userns: Convert hpfs to use kuid and kgid where appropriate
  userns: Convert btrfs to use kuid/kgid where appropriate
  userns: Convert bfs to use kuid/kgid where appropriate
  userns: Convert affs to use kuid/kgid wherwe appropriate
  userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
  userns: On ia64 deal with current_uid and current_gid being kuid and kgid
  userns: On ppc convert current_uid from a kuid before printing.
  userns: Convert s390 getting uid and gid system calls to use kuid and kgid
  userns: Convert s390 hypfs to use kuid and kgid where appropriate
  userns: Convert binder ipc to use kuids
  userns: Teach security_path_chown to take kuids and kgids
  userns: Add user namespace support to IMA
  userns: Convert EVM to deal with kuids and kgids in it's hmac computation
  ...
2012-10-02 11:11:09 -07:00
Linus Torvalds
06d2fe153b Driver core merge for 3.7-rc1
Here is the big driver core update for 3.7-rc1.
 
 A number of firmware_class.c updates (as you saw a month or so ago), and
 some hyper-v updates and some printk fixes as well.  All patches that
 are outside of the drivers/base area have been acked by the respective
 maintainers, and have all been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlBp3vkACgkQMUfUDdst+ylQoACgldktGFgkCLzH+rGYthrXOC5P
 9hUAnjmOhdoHlMTL81vWTlH+BrGernym
 =khrr
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core merge from Greg Kroah-Hartman:
 "Here is the big driver core update for 3.7-rc1.

  A number of firmware_class.c updates (as you saw a month or so ago),
  and some hyper-v updates and some printk fixes as well.  All patches
  that are outside of the drivers/base area have been acked by the
  respective maintainers, and have all been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
  memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl()
  device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit
  memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit]
  Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt
  Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting
  Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt
  device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit
  dev: Add dev_vprintk_emit and dev_printk_emit
  netdev_printk/netif_printk: Remove a superfluous logging colon
  netdev_printk/dynamic_netdev_dbg: Directly call printk_emit
  dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack
  driver-core: Shut up dev_dbg_reatelimited() without DEBUG
  tools/hv: Parse /etc/os-release
  tools/hv: Check for read/write errors
  tools/hv: Fix exit() error code
  tools/hv: Fix file handle leak
  Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO
  Tools: hv: Rename the function kvp_get_ip_address()
  Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO
  Tools: hv: Add an example script to configure an interface
  ...
2012-10-01 12:10:44 -07:00
Linus Torvalds
e05e279e6f debugfs: fix u32_array race in format_array_alloc
The format_array_alloc() function is fundamentally racy, in that it
prints the array twice: once to figure out how much space to allocate
for the buffer, and the second time to actually print out the data.

If any of the array contents changes in between, the allocation size may
be wrong, and the end result may be truncated in odd ways.

Just don't do it.  Allocate a maximum-sized array up-front, and just
format the array contents once.  The only user of the u32_array
interfaces is the Xen spinlock statistics code, and it has 31 entries in
the arrays, so the maximum size really isn't that big, and the end
result is much simpler code without the bug.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-21 11:48:05 -07:00
David Rientjes
36048853c5 debugfs: fix race in u32_array_read and allocate array at open
u32_array_open() is racy when multiple threads read from a file with a
seek position of zero, i.e. when two or more simultaneous reads are
occurring after the non-seekable files are created.  It is possible that
file->private_data is double-freed because the threads races between

	kfree(file->private-data);

and

	file->private_data = NULL;

The fix is to only do format_array_alloc() when the file is opened and
free it when it is closed.

Note that because the file has always been non-seekable, you can't open
it and read it multiple times anyway, so the data has always been
generated just once.  The difference is that now it is generated at open
time rather than at the time of the first read, and that avoids the
race.

Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Raghavendra <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-21 10:28:17 -07:00
Eric W. Biederman
7dc05881b6 userns: Convert debugfs to use kuid/kgid where appropriate.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-06 19:02:52 -07:00
Kees Cook
82aceae4f0 debugfs: more tightly restrict default mount mode
Since the debugfs is mostly only used by root, make the default mount
mode 0700. Most system owners do not need a more permissive value,
but they can choose to weaken the restrictions via their fstab.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-27 13:42:02 -07:00
Chris Wright
3cd52ab68b debugfs: make __create_file static
It's only used locally, no need to pollute global namespace.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 11:41:51 -07:00
Linus Torvalds
fa93669a19 Driver core merge for 3.6-rc1
Here's the big driver core pull request for 3.6-rc1.
 
 Unlike 3.5, this kernel should be a lot tamer, with the printk changes now
 settled down.  All we have here is some extcon driver updates, w1 driver
 updates, a few printk cleanups that weren't needed for 3.5, but are good to
 have now, and some other minor fixes/changes in the driver core.
 
 All of these have been in the linux-next releases for a while now.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAlARgIUACgkQMUfUDdst+ynDHgCfRNwIB9L+zZvjcKE5e1BhDbUl
 wVUAn398DFgbJ1+PjGkd1EMR2uVTh7Ou
 =MIFu
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...
2012-07-26 11:25:33 -07:00
Al Viro
ac481d6ca4 debugfs: get rid of useless arguments to debugfs_{mkdir,symlink}
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:35:30 +04:00
Al Viro
cfa57c11b0 debugfs: fold debugfs_create_by_name() into the only caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:35:25 +04:00
Al Viro
c3b1a35084 debugfs: make sure that debugfs_create_file() gets used only for regulars
It, debugfs_create_dir() and debugfs_create_link() use the common helper
now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:35:19 +04:00
Arend van Spriel
a59d6293e5 debugfs: change parameter check in debugfs_remove() functions
The dentry parameter in debugfs_remove() and debugfs_remove_recursive()
is checked being a NULL pointer. To make cleanup by callers easier this
check is extended using the IS_ERR_OR_NULL macro instead because the
debugfs_create_... functions can return a ERR_PTR() value.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 16:40:41 -07:00
Srivatsa Vaddagiri
9fe2a70153 debugfs: Add support to print u32 array in debugfs
Move the code from Xen to debugfs to make the code common
for other users as well.

Accked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com>
[v1: Fixed rebase issues]
[v2: Fixed PPC compile issues]
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-17 00:18:36 -04:00
Stephen Boyd
234e340582 simple_open: automatically convert to simple_open()
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05 15:25:50 -07:00
Linus Torvalds
e2a0883e40 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 1 from Al Viro:
 "This is _not_ all; in particular, Miklos' and Jan's stuff is not there
  yet."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
  ext4: initialization of ext4_li_mtx needs to be done earlier
  debugfs-related mode_t whack-a-mole
  hfsplus: add an ioctl to bless files
  hfsplus: change finder_info to u32
  hfsplus: initialise userflags
  qnx4: new helper - try_extent()
  qnx4: get rid of qnx4_bread/qnx4_getblk
  take removal of PF_FORKNOEXEC to flush_old_exec()
  trim includes in inode.c
  um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
  um: embed ->stub_pages[] into mmu_context
  gadgetfs: list_for_each_safe() misuse
  ocfs2: fix leaks on failure exits in module_init
  ecryptfs: make register_filesystem() the last potential failure exit
  ntfs: forgets to unregister sysctls on register_filesystem() failure
  logfs: missing cleanup on register_filesystem() failure
  jfs: mising cleanup on register_filesystem() failure
  make configfs_pin_fs() return root dentry on success
  configfs: configfs_create_dir() has parent dentry in dentry->d_parent
  configfs: sanitize configfs_create()
  ...
2012-03-21 13:36:41 -07:00
Al Viro
88187398cc debugfs-related mode_t whack-a-mole
all of those should be umode_t...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20 21:29:53 -04:00