Commit Graph

10 Commits

Author SHA1 Message Date
Geert Uytterhoeven
ec7f9eb4be spi: sh-msiof: Add support for SH-Mobile AG5
MSIOF in SH-Mobile AG5 (sh73a0) is handled fine by the existing driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30 14:23:09 +00:00
Geert Uytterhoeven
eb8d0ac4af spi: sh-msiof: Match renesas,rx-fifo-size in DT bindings doc with driver
Commit fe78d0b769 ("spi: sh-msiof: Fix FIFO size to 64 word from
256 word") changed the default RX FIFO size on R-Car Gen2 SoCs in the
driver code, but forgot to update the DT bindings documentation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-29 17:13:47 +01:00
Ryo Kataoka
cb6d08a2b6 ARM: shmobile: r8a7791: Remove MSIOF address from device tree
MSIOF Base Address H'E6xx can be accessed by CPU and DMAC.
MSIOF Base Address H'E7xx for DMAC was removed from H/W manual.

Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-27 13:05:14 +09:00
Yoshihiro Shimoda
3110628d89 spi: sh-msiof: Configure MSIOF sync signal timing in device tree
The MSIOF controller has DTDL and SYNCDL in SITMDR1 register. So,
this patch adds new properties like the following commit:
  d0fb47a523
  (spi: fsl-espi: Configure FSL eSPI CSBEF and CSAFT)

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-24 12:31:17 +00:00
Geert Uytterhoeven
e221cc99be spi: sh-msiof: Add support for new R-Car Gen2 SoCs
Add support for MSIOF in:
  - r8a7792 (R-Car V2H)
  - r8a7793 (R-Car M2-N)
  - r8a7794 (R-Car E2)

r8a7791 is now called "R-Car M2-W".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-28 19:17:46 +01:00
Geert Uytterhoeven
a6be4de6a2 spi: sh-msiof: Add DT support to DMA setup
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16 17:14:30 -05:00
Geert Uytterhoeven
f9ee821ebc spi: sh-msiof: Remove "renesas,msiof-sh7724" from bindings
It's not implemented in the driver, so it's a bad example.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-11 09:56:20 +00:00
Geert Uytterhoeven
beb74bb087 spi: sh-msiof: Add support for R-Car H2 and M2
Add support for the MSIOF variant in the R-Car H2 (r8a7790) and M2
(r8a7791) SoCs.

Binding documentation:
  - Add future-proof "renesas,msiof-<soctype>" compatible values,
  - The default for "renesas,rx-fifo-size" is 256 on R-Car H2 and M2,
  - "renesas,tx-fifo-size" and "renesas,rx-fifo-size" are deprecated for
    soctype-specific bindings,
  - Add example bindings.

Implementation:
  - MSIOF on R-Car H2 and M2 requires the transmission of dummy data if
    data is being received only (cfr. "Set SICTR.TSCKE to 1" and "Write
    dummy transmission data to SITFDR" in paragraph "Transmit and Receive
    Procedures" of the Hardware User's Manual).
  - As RX depends on TX, MSIOF on R-Car H2 and M2 also lacks the RSCR
    register (Receive Clock Select Register), and some bits in the RMDR1
    (Receive Mode Register 1) and TMDR2 (Transmit Mode Register 2)
    registers.
  - Use the recently introduced SPI_MASTER_MUST_TX flag to enable support
    for dummy transmission in the SPI core, and to differentiate from other
    MSIOF implementations in code paths that need this.
  - New DT compatible values ("renesas,msiof-r8a7790" and
    "renesas,msiof-r8a7791") are added, as well as new platform device
    names ("spi_r8a7790_msiof" and "spi_r8a7791_msiof").
  - The default RX FIFO size is 256 words on R-Car H2 and M2.

This is loosely based on a set of patches from Takashi Yoshii
<takasi-y@ops.dti.ne.jp>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 19:44:02 +09:00
Geert Uytterhoeven
32d3b2d1dd spi: sh-msiof: Improve bindings
Documentation:
  - Add missing "interrupt-parent", "#address-cells", "#size-cells", and
    "clocks" properties,
  - Add missing default values for "num-cs", "renesas,tx-fifo-size" and
    "renesas,rx-fifo-size",
  - Add a reference to the pinctrl documentation.

Implementation:
  - As "num-cs" is marked optional, provide a sensible default.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 19:33:47 +09:00
Bastian Hecht
cf9c86efec spi/sh-msiof: Add device tree parsing to driver
This adds the capability to retrieve setup data from the device tree
node. The usage of platform data is still available.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 12:26:58 +00:00